Black liquor is obtained as a by-product of the pulping process,which is used to convert biomass into pulp by removing lignin,hemicelluloses and other extractives from wood to free cellulose fibers.Lignin represents a...Black liquor is obtained as a by-product of the pulping process,which is used to convert biomass into pulp by removing lignin,hemicelluloses and other extractives from wood to free cellulose fibers.Lignin represents a major constituent in black liquor,with quantities varying from 20%to 30%,of which a very low share is used for manufacturing value-added products,while the rest is mainly burned for energy purposes,thus underestimating its great potential as a raw material.Therefore,it is essential to establish new isolation and extraction methods to increase lignin valorization in the development of bio-based chemicals.The aim of this research work was to determine the effect of KOH or ethanol concentration as an isolation agent on lignin yields and the chemical characteristics of lignin isolated from formacell black liquor of oil palm empty fruit bunch(OPEFB).Isolation of lignin was carried out using KOH with various concentrations ranging from 5%to 15%(w/v).Ethanol was also used to precipitate lignin from black liquor at concentrations varying from 5%to 30%(v/v).The results obtained showed that the addition of KOH solution at 12.5%and 15%concentrations resulted in better lignin yield and chemical properties of lignin,i.e.,pH values of 3.86 and 4.27,lignin yield of 12.78%and 14.95%,methoxyl content of 11.33%and 10.13%,and lignin equivalent weights of 476.25 and 427.03,respectively.Due to its phenolic structure and rich functional groups that are favorable for modifications,lignin has the potential to be used as a green additive in the development of advanced biocomposite products in various applications to replace current fossil fuel-based material,ranging from fillers,fire retardants,formaldehyde scavengers,carbon fibers,aerogels,and wood adhesives.展开更多
CO2 gasification of Fuijian high-metamorphous anthracite with black liquor （BL） and/or mixture of BL and calcium stuff （BL＋Ca） as catalyst was studied by using a thermogravimetry under 750-950℃ at ambient pressu...CO2 gasification of Fuijian high-metamorphous anthracite with black liquor （BL） and/or mixture of BL and calcium stuff （BL＋Ca） as catalyst was studied by using a thermogravimetry under 750-950℃ at ambient pressure. When the coal was impregnated with an appropriate quantity of Ca and BL mixture, the catalytic activity of CO2 gasification was enhanced obviously. With a loading of 8%Na-BL＋2%Ca, the carbon conversion of three coal samples tested reaches up to 92.9%-99.3% at 950℃ within 30min. The continuous formation of alkali surface compounds such as （[-COM], [-CO2M]） and the presence of exchanged Ca, such as calcium phenolate and calcium carboxylates （COO）2Ca, contribute to the increase in catalytic efficiency, and using BL＋Ca is more efficient than that adding BL only, The homogeneous model and shrinking-core model were applied to correlate the data of conversion with time and to estimate the reaction rate constants under different temperature. The corresponding reaction activation energy （Ea） and pre-exponential factor of three anthracites were estimated. It is found that Ea is in the range from 73.6 to 121.4kJ·mol^-1 in the case of BL＋Ca, and 74.3 to 104.2kJ·mol^-1 when only BL was used as the catalyst, both of which are much less than that from 143.5 to 181.4kJ·mol^-1 if no catalyst used. It is clearly demonstrated that both of BL＋Ca mixture and BL could be the source of cheap and effective catalyst for coal gasification.展开更多
The catalytic effects of single and mixed catalysts, i.e. single 3%Ca and 5%Na-BL（black liquor） catalysts and mixed 3%Ca＋5%Na-BL catalyst, on carbon conversion, gasification reaction rate constant and activation en...The catalytic effects of single and mixed catalysts, i.e. single 3%Ca and 5%Na-BL（black liquor） catalysts and mixed 3%Ca＋5%Na-BL catalyst, on carbon conversion, gasification reaction rate constant and activation energy, relative amount of harmful pollutant like sulphur containing gases have been investigated by thermogravimetry in steam gasification under temperature 750℃ to 950℃ at ambient pressure for three high-metarnorphous anthracites （Longyan, Fenghai and Youxia coals in Fujian Province）. The mixed catalyst of 3%Ca＋5%Na-BL increases greatly the carbon conversion and gasification rate constant by accelerating the gasification reaction C＋H2O→CO＋H2 due to presence of alkali surfacecompounds [COM], [CO2M] and exchanged calcium phenolate and calcium carboxylate （-COO）2. By adding CaCO3 into BL catalyst in gasification, in addition to improving the catalyst function and enhancing the carbon conversion, the effective desulphurization is also achieved, but the better operating temperature should be below 900℃. The homogenous and shrinking core models can be successfully employed to correlate the relations between the conversion and the gasification .time .and to estimate the reaction rate constant, The reaction acUvaUon energy and pre-exponential factor are estimated and the activation energy for mixed catalyst is in a range of 98.72-166.92 kJ·mol^-1, much less than 177.50-196.46 kJ·mol^-1 for non-catalytic steam gasification for three experimental coals.展开更多
Two different kinds of black liquor from the papermaking industry were treated by acidification and reuse. The experimental parameters and conditions were discussed in detail. The experimental results indicated that t...Two different kinds of black liquor from the papermaking industry were treated by acidification and reuse. The experimental parameters and conditions were discussed in detail. The experimental results indicated that the treatment process mentioned in this article is an effective process for the treatment of black liquor from the papermaking industry. By the treatment, the solid materials in black liquor are transferred into two by products and the other components are reused or evaporated. Thus, no wastewater except some condensation water would be discharged in pulping process and the problem of pollution of black liquor would be effectively solved.展开更多
The reed pulping black liquor is used as a sample. Researches of (1) combined effect of ultrasound(US)/polyferric sulphate(PFS)/hydrogen peroxide(H 2O 2); (2) effects of the horn tip areas; (3) effect of dose of PFS w...The reed pulping black liquor is used as a sample. Researches of (1) combined effect of ultrasound(US)/polyferric sulphate(PFS)/hydrogen peroxide(H 2O 2); (2) effects of the horn tip areas; (3) effect of dose of PFS were carried. Extrapolation of these experiments indicated treatment results are possibly related to complex chemical compositions in the reed pulping black liquor.展开更多
The electrochemical degradation of reed pulp black liquor containing lignin pretreated by acidification method was investigated using a three-dimensional electrode reactor. Using activated carbon as particle electrode...The electrochemical degradation of reed pulp black liquor containing lignin pretreated by acidification method was investigated using a three-dimensional electrode reactor. Using activated carbon as particle electrode, the effects of p H value, reaction temperature, electrolysis time and current on residual concentration of total organic carbon(TOC) were discussed in detail. The optimal conditions were obtained: pH 2.5, influent flow rate of 200 mL/min, 25 °C, 300 mA and 2h of electrolysis time, and the removal efficiency of TOC maintains at 35.57 %. The results of the electrochemical method indicate that ·OH radicals are produced in activated carbon anode in the electrolysis process and then adsorbed on the activated carbon surface. Microcell consists of ·OH radicals and the absorbed lignin. With the microcell reaction, the lignin is degraded, while the anodic polarized curve illustrates that the lignin is obviously oxidized in the anode. The contributions of direct and indirect electrolyses to the TOC removal ratio are about 50%, respectively.展开更多
Adhesive for bamboo plywood prepared directly using lignin existing in the black liquor as a kind of material replacing phenol was proposed on the basis of the same structural properties of lignin and phenol. The resu...Adhesive for bamboo plywood prepared directly using lignin existing in the black liquor as a kind of material replacing phenol was proposed on the basis of the same structural properties of lignin and phenol. The results indicate that the reaction time of black liquor methylating is 30min, when the ratio of alkali to formaldehyde is controlled at approximately 0.20, decomposition rate of formaldehyde is the lowest and the effect of black liquor methylating is the best, the optimal molar ratio of phenol： formaldehyde to NaOH to H2O of preparing phenolic resin is 1.00 ： 1.50 ： 0.50 ： 9.00, and the suitable viscosity is 27 - 30 Pa· s. At different mass ratios of methylated black liquor to phenolic resin, all terms of performance of black liquor phenolic resin are excellent and satisfy the requirement. All terms of performance of bamboo plywood prepared using this technique are hetter than that of excellent bamboo plywood of national criteria. Using this technique, the cost is depressed by 28.69% without altering the traditional adhesive producing technique flow, and without using additional equipment.展开更多
Several typical ash samples from a 0.25 MW test furnace fired black liquor coal slurry were selected for investigation. The phases and compounds containing sodium in ash samples were acquired from X-ray diffraction an...Several typical ash samples from a 0.25 MW test furnace fired black liquor coal slurry were selected for investigation. The phases and compounds containing sodium in ash samples were acquired from X-ray diffraction analyses. As well, detailed analyses of the amounts of major mineral elements along thickness gradients of representative ash samples were carried out. The elements, including Na, Si, A1, S and C1 were analyzed by the advanced electron probe microanalyzer equipment, which provid evidence and interpretation for the analytical results of XRD. The findings indicate that the occurrence form of sodium has experi- enced important changes during the combustion of black liquor coal slurry, which translated into nepheline, thenardite, sodium sulfate, sodium chloride, sodium silicoaluminate, hanyne and other phases containing sodium, from NaOH, Na2CO3 and Na2S in raw fuel. Of all the sodium compounds, nepheline, thenardite and sodium sulfate are the most important forms of Na in solid com- bustion residues. Such a transformation of Na during the combustion of black liquor coal slurry resulted in a considerable impact on ash deposition and is not only different from the raw coal and papermaldng black liquors, but is also affected by local circum- stances in the combustion furnace. Amounts of Na, S and C1 in ash deposits from low temperature zones were larger than those from high temperature zones. Our findings should provide important theoretical instructions for industrial applications of black liquor coal slurry.展开更多
In the process of synthesis of nanometer SiC precursors with sol-gel of SiO2 and lignin , the products of all sizes required can be controlled by the concentration of reac-t ants , pH, temperature, reaction and ageing...In the process of synthesis of nanometer SiC precursors with sol-gel of SiO2 and lignin , the products of all sizes required can be controlled by the concentration of reac-t ants , pH, temperature, reaction and ageing time , and so on . The best conditions in this research are : the concentration of Na2SiO3 and organic matters are 4. 50% and 26.4% respectively, pH = 3.3 , T = 65℃ , ageing time is 30min , dried at 150 ℃ , the size of SiC precursors is about 2.0μm .展开更多
This paper summarizes the possible application of lignin extraction from black liquor and the development of lignin extraction technology.Lignin extraction from black liquor is an important,economical method to resolv...This paper summarizes the possible application of lignin extraction from black liquor and the development of lignin extraction technology.Lignin extraction from black liquor is an important,economical method to resolve the bottleneck associated with the recovery boiler and achieve the targeted capacity expansion in pulp mills.A few of key issues must be taken into cosideration when lignin extraction technology is adopted on the industrial scale.展开更多
The novel and facile preparation of magnetically interconnected micro/macroporous structure of monolithic porous carbon adsorbent(MPCA)were designed and presented herein.The synthesis was achieved via conventional fre...The novel and facile preparation of magnetically interconnected micro/macroporous structure of monolithic porous carbon adsorbent(MPCA)were designed and presented herein.The synthesis was achieved via conventional freezedrying and pyrolysis processes.In this study,sodium alginate and wasted black liquor were employed as starting precursors.Sodium alginate acts as a template of materials,whereas black liquor,the wasted product from the paper industry with plentiful of lignin content and alkaline solution,played an essential role in the reinforcement and activation of porosity for the resulting materials.Moreover,both the precursors were well dissolved in Fe^(3+) solution,providing a simple addition of a magnetic source in a one-pot synthesis.The interconnected micro/macroporous structures were generated through freeze-drying and,subsequently the pyrolysis process.The obtained cylindricalshaped monolithic porous carbon adsorbent(MPCA-700)showed high mechanical stability,a high BET specific surface area(902 m^(2)/g).Such aforementioned features were considered suitable to make the synthesized monolith as an adsorbent for the removal of heavy metal ions.The maximum adsorption capacity of MPCA-700 towards Pb^(2+) ions was 76.34 mg/g at pH 5.The adsorption studies illustrated that adsorption kinetics and isotherm perfectly fitted with the pseudo-second-order kinetics model and Langmuir isotherm,respectively.This work presents a promising protocol to reduce the overall costs in the preparation of renewable adsorbents with good adsorption efficiency and regeneration.展开更多
Ultrasound (US)-induced cavitation is an effective way in oxidizing organic contaminants in wastewater either as the independent operation unit or in combination with other oxidation methods. In this paper, black liqu...Ultrasound (US)-induced cavitation is an effective way in oxidizing organic contaminants in wastewater either as the independent operation unit or in combination with other oxidation methods. In this paper, black liquor and filtrate after acidifying and settling were sonicated. The effect of working parameters on ultrasonic degradation of black liquor, such as different combination methods, frequency, power supply, initial concentration, pH, duration time, ionic strength and catalyst were studied. The results were as follows: (1) At the conditions of 40kHz, 100W, 4h, pH at 6 and temperature 30?℃, utilizing US/US-H2O2/US-Fenton, weak-orange filtrate turned to colloid with the increase of time and little sediment produced after settling. Especially filtrate came to be milk white collides and upper water approached to nearly achromatic by US-Fenton. Compared with the US, US-H2O2/US-Fenton COD (Chemical oxidation demand) removal ratio can increase 15%, 30% respectively. Because of more hydroxyl radicals produced in the reaction process; (2) At the condition of 100W and 4h, the degradation efficiency of black liquor was better at 40kHz over at 20kHz. Moreover black liquor can be biodegraded easily. Those based on that the big molecule of contaminants in aqueous solution can be changed into the little molecule with ultrasound (3) At the condition of 40kHz and 4h, the COD removal ratio of black liquor was more higher at 60W than at 80W, while the removal ratio of COD at 60W was nearly close to the ratio at 100W; (4) The initial concentration of black liquor influenced the effect of sonochemical degradation; (5) The variation of pH had no effect on degradation; (6) The longer the duration time, the greater the removal ratio of COD. But this ratio increased slowly after 4h; (7) Adding 0.2g/L NaCl to change the ionic strength of the black liquor, the COD removal ratio can increase 10%; (8) The degradation rates increased by the coexistent catalysts of TiO2, Co2+ and Ag+.展开更多
The effects of adding pulping black liquor and other additives to coal-water slurry(CWS) on the sulfur-fixing performance of the resultant mixture(pulping black liquor coal-water slurry) were evaluated. The experiment...The effects of adding pulping black liquor and other additives to coal-water slurry(CWS) on the sulfur-fixing performance of the resultant mixture(pulping black liquor coal-water slurry) were evaluated. The experimental results demonstrated that the ash content of the black liquor coalwater slurry decreased as the addition of pulping black liquor in the mixture increased. Nevertheless, the addition amount should be appropriately selected to ensure that the black liquor coal-water slurry had a moderate calorific value. Addition of black liquor improved the combustion performance of CWS by lowering the ignition point and stabilizing the combustion process; moreover, the sulfur-fixation ratio after combustion increased by 12 to 16 percentage points than that of CWS, and the content of high-melting-point salt in the ash from CWS after adding black liquor was low. The sulfur-fixing ratio of CWS after adding a sulfur-fixing agent was effectively increased by 25 to 30 percenatge points, but with compromise of the fluidity and stability of the CWS; thus, the addition amount of a sulfur-fixing agent should be optimized.展开更多
A magnesia adsorbent was prepared from straw pulp black liquor and magnesium sulfate for the first time, and its adsorption of phenol from aqueous solution was examined. The characteristics of the adsorbent were teste...A magnesia adsorbent was prepared from straw pulp black liquor and magnesium sulfate for the first time, and its adsorption of phenol from aqueous solution was examined. The characteristics of the adsorbent were tested through chemical analysis, surface analysis, X-ray diffraction and FT-IR spectroscopy. The effects of various factors, such as dose, adsorption time and adsorption temperature, on phenol adsorption behavior were studied. The results show that the adsorption processes can be fitted to the isotherm Langmuir model very well. It was found that the adsorption process was strongly influenced by temperature and the optimal temperature for phenol removal was 40 ℃. The optimum adsorption time was 10 min, and desorption would happen afterwards. Between the models of Langmuir and Freundlich, the adsorption process of phenol onto magnesia fitted the Langmuir equation better.展开更多
Environmentally friendly and energy saving treatment of black liquor(BL),a massively produced waste in Kraft papermaking process,still remains a big challenge.Here,by adopting a NieCaOeCa_(12)Al_(14)O_(33) bifunctiona...Environmentally friendly and energy saving treatment of black liquor(BL),a massively produced waste in Kraft papermaking process,still remains a big challenge.Here,by adopting a NieCaOeCa_(12)Al_(14)O_(33) bifunctional catalyst derived from hydrotalcite-like materials,we demonstrate the feasibility of producing high-purity H_(2)(~96%)with 0.9 mol H_(2) mol^(-1) C yield via the sorption enhanced steam reforming(SESR)of BL.The SESRBL performance in terms of H_(2) production maintained stable for 5 cycles,but declined from the 6th cycle.XRD,Raman spectroscopy,elemental analysis and energy dispersive techniques were employed to rationalize the deactivation of the catalyst.It was revealed that gradual sintering and agglomeration of Ni and CaO and associated coking played important roles in catalyst deactivation and performance degradation of SESRBL,while deposition of Na and K from the BL might also be responsible for the declined performance.On the other hand,it was demonstrated that the SESRBL process could effectively reduce the emission of sulfur species by storing it as CaSO_(3).Our results highlight a promising alternative for BL treatment and H_(2) production,thereby being beneficial for pollution control and environment governance in the context of mitigation of climate change.展开更多
This paper illustrates the general experiment principle of anaerobic biological cotton pulp black liquor microbial degradation, including the process and result of experiment. The result shows that the decrement of CO...This paper illustrates the general experiment principle of anaerobic biological cotton pulp black liquor microbial degradation, including the process and result of experiment. The result shows that the decrement of COD may arrive at 80% by the strengthen effect of Photosynthetic Bacteria. The biochemical methane Potential (BMP) and Chemical Oxygen Demand (COD) of cotton pulp black liquor are also measured during the experiment using improved measure method. The equivalent of COD and BMP is verified as a result. Finally analysis is done based on the experiment result.展开更多
Analysis on foulants shows that: the elements (except for C, H and O) in foulants formed during evaporating alkaline wheat straw black liquor are Si, Ca , K, Na, Mg and Al; Si and Ca account for about 36% of the weigh...Analysis on foulants shows that: the elements (except for C, H and O) in foulants formed during evaporating alkaline wheat straw black liquor are Si, Ca , K, Na, Mg and Al; Si and Ca account for about 36% of the weight of foulants; The organic ingredients amout to about 20% of the foulant; Rhodesite (Ca,K,Na)8Si16O40·11H2O is the main composition in foulants. The fouling mechanism of wheat black liquor is quite different from that of soft/hard wood black liquor, because the content of Si inside wheat straw black liquor is much more than that of soft/hard wood black liquor. Complex chemical reactions occur when evaporating wheat straw black liquor. The author considers that colloid H2SiO3 plays an important role in the process. The minerals produced by reactions between H2SiO3, with anion charges and positive ions, such as Ca2+, K+, Na+, etc. Further investigation on the process should be done.The fractal theory is used to analyze the fouling geometric texture. The fractal dimension values D of foulants are also calculated.展开更多
The heat transfer properties of black liquor from wheat pulp in a stirring apparatus were studied in this paper. By changing the experiment conditions of temperature-difference driving force, geometry shape and agitat...The heat transfer properties of black liquor from wheat pulp in a stirring apparatus were studied in this paper. By changing the experiment conditions of temperature-difference driving force, geometry shape and agitator speed, we investigated the heat transfer properties of black liquor from wheat pulp under the conditions of different physical properties, rheological properties, fluid power conditions and the space geometrical characteristics of fluid flow. Furthermore the related mathematical models and evaluation criteria based on the conventional methods and artificial neural networks were established. The experimental results showed that the above-mentioned factors have obvious effect to black liquor from wheat pulp?展开更多
Thick black liquor, thin black liquor and solid state sodium hydroxide are added to the liquor treated by sulfur dioxide, then the blended liquor is used to recycle cooking of straw pulp. The black liquor, separated l...Thick black liquor, thin black liquor and solid state sodium hydroxide are added to the liquor treated by sulfur dioxide, then the blended liquor is used to recycle cooking of straw pulp. The black liquor, separated liquor and pulp of every cycles are analyzed respectively. Result shows that the content of lignin and organism in recycle black liquor and separated liquor increases faster in the first three cycles and then continues to increase slowly till four or five times, after that it trends to a stable state. The main organism separated from waste liquor of AS-AQ treated by sulfur dioxide is alkali-lignin, above 50% of total lignin in black liquor. The yield of pulp made from recycle cooking is steady, the hardness of pulp has a great improvement with recycle cooking. The brightness of pulp reduces correspondingly before bleaching, and after bleaching the brightness of pulp is relatively high and steady at the same sodium hypo chlorite dosage.展开更多
A novel vapor-liquid-solid circulating fluidized bed evaporator, meaning for enhancing heat transfer and preventing fouling, is applied to wheat straw black liquor, which is the primary pollutant in China’s papermaki...A novel vapor-liquid-solid circulating fluidized bed evaporator, meaning for enhancing heat transfer and preventing fouling, is applied to wheat straw black liquor, which is the primary pollutant in China’s papermaking industry. It is treated by alkali recovery, in which evaporation is a key process. The experimental results show that the vapor-liquid-solid three-phase boiling heat transfer coefficient is enhanced by 20%～40% than that of vapor-liquid two-phase boiling flow, also, the novel evaporator exhibits an excellent function of fouling prevention.展开更多
基金This work was also supported by the Project“Development,Properties,and Application of Eco-Friendly Wood-Based Composites”,No.HИC-Б-1145/04.2021,carried out at the University of Forestry,Sofia,Bulgaria.The authors would like to acknowledge the Fundamental Research Grant Scheme(FRGS 2018-1)Reference Code:FRGS/1/2018/WAB07/UPM/1 provided by the Ministry of Higher Education,Malaysia.
文摘Black liquor is obtained as a by-product of the pulping process,which is used to convert biomass into pulp by removing lignin,hemicelluloses and other extractives from wood to free cellulose fibers.Lignin represents a major constituent in black liquor,with quantities varying from 20%to 30%,of which a very low share is used for manufacturing value-added products,while the rest is mainly burned for energy purposes,thus underestimating its great potential as a raw material.Therefore,it is essential to establish new isolation and extraction methods to increase lignin valorization in the development of bio-based chemicals.The aim of this research work was to determine the effect of KOH or ethanol concentration as an isolation agent on lignin yields and the chemical characteristics of lignin isolated from formacell black liquor of oil palm empty fruit bunch(OPEFB).Isolation of lignin was carried out using KOH with various concentrations ranging from 5%to 15%(w/v).Ethanol was also used to precipitate lignin from black liquor at concentrations varying from 5%to 30%(v/v).The results obtained showed that the addition of KOH solution at 12.5%and 15%concentrations resulted in better lignin yield and chemical properties of lignin,i.e.,pH values of 3.86 and 4.27,lignin yield of 12.78%and 14.95%,methoxyl content of 11.33%and 10.13%,and lignin equivalent weights of 476.25 and 427.03,respectively.Due to its phenolic structure and rich functional groups that are favorable for modifications,lignin has the potential to be used as a green additive in the development of advanced biocomposite products in various applications to replace current fossil fuel-based material,ranging from fillers,fire retardants,formaldehyde scavengers,carbon fibers,aerogels,and wood adhesives.
基金Supported by the National Natural Science Foundation of China （No.20376014） and Fujian Science and Technology Council Grant （HG99-01）.
文摘CO2 gasification of Fuijian high-metamorphous anthracite with black liquor （BL） and/or mixture of BL and calcium stuff （BL＋Ca） as catalyst was studied by using a thermogravimetry under 750-950℃ at ambient pressure. When the coal was impregnated with an appropriate quantity of Ca and BL mixture, the catalytic activity of CO2 gasification was enhanced obviously. With a loading of 8%Na-BL＋2%Ca, the carbon conversion of three coal samples tested reaches up to 92.9%-99.3% at 950℃ within 30min. The continuous formation of alkali surface compounds such as （[-COM], [-CO2M]） and the presence of exchanged Ca, such as calcium phenolate and calcium carboxylates （COO）2Ca, contribute to the increase in catalytic efficiency, and using BL＋Ca is more efficient than that adding BL only, The homogeneous model and shrinking-core model were applied to correlate the data of conversion with time and to estimate the reaction rate constants under different temperature. The corresponding reaction activation energy （Ea） and pre-exponential factor of three anthracites were estimated. It is found that Ea is in the range from 73.6 to 121.4kJ·mol^-1 in the case of BL＋Ca, and 74.3 to 104.2kJ·mol^-1 when only BL was used as the catalyst, both of which are much less than that from 143.5 to 181.4kJ·mol^-1 if no catalyst used. It is clearly demonstrated that both of BL＋Ca mixture and BL could be the source of cheap and effective catalyst for coal gasification.
基金Supported by the National Natural Science Foundation of China （20376014） and Fujian Science and Technology Council Grant （HG99-01 ）.
文摘The catalytic effects of single and mixed catalysts, i.e. single 3%Ca and 5%Na-BL（black liquor） catalysts and mixed 3%Ca＋5%Na-BL catalyst, on carbon conversion, gasification reaction rate constant and activation energy, relative amount of harmful pollutant like sulphur containing gases have been investigated by thermogravimetry in steam gasification under temperature 750℃ to 950℃ at ambient pressure for three high-metarnorphous anthracites （Longyan, Fenghai and Youxia coals in Fujian Province）. The mixed catalyst of 3%Ca＋5%Na-BL increases greatly the carbon conversion and gasification rate constant by accelerating the gasification reaction C＋H2O→CO＋H2 due to presence of alkali surfacecompounds [COM], [CO2M] and exchanged calcium phenolate and calcium carboxylate （-COO）2. By adding CaCO3 into BL catalyst in gasification, in addition to improving the catalyst function and enhancing the carbon conversion, the effective desulphurization is also achieved, but the better operating temperature should be below 900℃. The homogenous and shrinking core models can be successfully employed to correlate the relations between the conversion and the gasification .time .and to estimate the reaction rate constant, The reaction acUvaUon energy and pre-exponential factor are estimated and the activation energy for mixed catalyst is in a range of 98.72-166.92 kJ·mol^-1, much less than 177.50-196.46 kJ·mol^-1 for non-catalytic steam gasification for three experimental coals.
文摘Two different kinds of black liquor from the papermaking industry were treated by acidification and reuse. The experimental parameters and conditions were discussed in detail. The experimental results indicated that the treatment process mentioned in this article is an effective process for the treatment of black liquor from the papermaking industry. By the treatment, the solid materials in black liquor are transferred into two by products and the other components are reused or evaporated. Thus, no wastewater except some condensation water would be discharged in pulping process and the problem of pollution of black liquor would be effectively solved.
文摘The reed pulping black liquor is used as a sample. Researches of (1) combined effect of ultrasound(US)/polyferric sulphate(PFS)/hydrogen peroxide(H 2O 2); (2) effects of the horn tip areas; (3) effect of dose of PFS were carried. Extrapolation of these experiments indicated treatment results are possibly related to complex chemical compositions in the reed pulping black liquor.
基金Project(50925417)supported by the National Natureal Science Foundation for Distinguished Young Scholar of ChinaProject(51074191)supported by the National Natural Science Foundation of China
文摘The electrochemical degradation of reed pulp black liquor containing lignin pretreated by acidification method was investigated using a three-dimensional electrode reactor. Using activated carbon as particle electrode, the effects of p H value, reaction temperature, electrolysis time and current on residual concentration of total organic carbon(TOC) were discussed in detail. The optimal conditions were obtained: pH 2.5, influent flow rate of 200 mL/min, 25 °C, 300 mA and 2h of electrolysis time, and the removal efficiency of TOC maintains at 35.57 %. The results of the electrochemical method indicate that ·OH radicals are produced in activated carbon anode in the electrolysis process and then adsorbed on the activated carbon surface. Microcell consists of ·OH radicals and the absorbed lignin. With the microcell reaction, the lignin is degraded, while the anodic polarized curve illustrates that the lignin is obviously oxidized in the anode. The contributions of direct and indirect electrolyses to the TOC removal ratio are about 50%, respectively.
文摘Adhesive for bamboo plywood prepared directly using lignin existing in the black liquor as a kind of material replacing phenol was proposed on the basis of the same structural properties of lignin and phenol. The results indicate that the reaction time of black liquor methylating is 30min, when the ratio of alkali to formaldehyde is controlled at approximately 0.20, decomposition rate of formaldehyde is the lowest and the effect of black liquor methylating is the best, the optimal molar ratio of phenol： formaldehyde to NaOH to H2O of preparing phenolic resin is 1.00 ： 1.50 ： 0.50 ： 9.00, and the suitable viscosity is 27 - 30 Pa· s. At different mass ratios of methylated black liquor to phenolic resin, all terms of performance of black liquor phenolic resin are excellent and satisfy the requirement. All terms of performance of bamboo plywood prepared using this technique are hetter than that of excellent bamboo plywood of national criteria. Using this technique, the cost is depressed by 28.69% without altering the traditional adhesive producing technique flow, and without using additional equipment.
基金Projects 2004CB217701 supported by the National Basic Research Program of China 2005-1 by the Scientific Research Foundation of the Ministry ofEducation of Hebei Province
文摘Several typical ash samples from a 0.25 MW test furnace fired black liquor coal slurry were selected for investigation. The phases and compounds containing sodium in ash samples were acquired from X-ray diffraction analyses. As well, detailed analyses of the amounts of major mineral elements along thickness gradients of representative ash samples were carried out. The elements, including Na, Si, A1, S and C1 were analyzed by the advanced electron probe microanalyzer equipment, which provid evidence and interpretation for the analytical results of XRD. The findings indicate that the occurrence form of sodium has experi- enced important changes during the combustion of black liquor coal slurry, which translated into nepheline, thenardite, sodium sulfate, sodium chloride, sodium silicoaluminate, hanyne and other phases containing sodium, from NaOH, Na2CO3 and Na2S in raw fuel. Of all the sodium compounds, nepheline, thenardite and sodium sulfate are the most important forms of Na in solid com- bustion residues. Such a transformation of Na during the combustion of black liquor coal slurry resulted in a considerable impact on ash deposition and is not only different from the raw coal and papermaldng black liquors, but is also affected by local circum- stances in the combustion furnace. Amounts of Na, S and C1 in ash deposits from low temperature zones were larger than those from high temperature zones. Our findings should provide important theoretical instructions for industrial applications of black liquor coal slurry.
文摘In the process of synthesis of nanometer SiC precursors with sol-gel of SiO2 and lignin , the products of all sizes required can be controlled by the concentration of reac-t ants , pH, temperature, reaction and ageing time , and so on . The best conditions in this research are : the concentration of Na2SiO3 and organic matters are 4. 50% and 26.4% respectively, pH = 3.3 , T = 65℃ , ageing time is 30min , dried at 150 ℃ , the size of SiC precursors is about 2.0μm .
基金supported by the State Natural Sciences Foundation(No.31270635 and No.31670582)the National Major Fundamental Research Program of China(973 Programs,No.2013CB228101)
文摘This paper summarizes the possible application of lignin extraction from black liquor and the development of lignin extraction technology.Lignin extraction from black liquor is an important,economical method to resolve the bottleneck associated with the recovery boiler and achieve the targeted capacity expansion in pulp mills.A few of key issues must be taken into cosideration when lignin extraction technology is adopted on the industrial scale.
基金This work was funded by Development and Promotion of Science Technology Talents(DPST)Research Grant(Grant No.017/2559)the Institute for the Promotion of Teaching Science and Technology(IPST),Thailand.
文摘The novel and facile preparation of magnetically interconnected micro/macroporous structure of monolithic porous carbon adsorbent(MPCA)were designed and presented herein.The synthesis was achieved via conventional freezedrying and pyrolysis processes.In this study,sodium alginate and wasted black liquor were employed as starting precursors.Sodium alginate acts as a template of materials,whereas black liquor,the wasted product from the paper industry with plentiful of lignin content and alkaline solution,played an essential role in the reinforcement and activation of porosity for the resulting materials.Moreover,both the precursors were well dissolved in Fe^(3+) solution,providing a simple addition of a magnetic source in a one-pot synthesis.The interconnected micro/macroporous structures were generated through freeze-drying and,subsequently the pyrolysis process.The obtained cylindricalshaped monolithic porous carbon adsorbent(MPCA-700)showed high mechanical stability,a high BET specific surface area(902 m^(2)/g).Such aforementioned features were considered suitable to make the synthesized monolith as an adsorbent for the removal of heavy metal ions.The maximum adsorption capacity of MPCA-700 towards Pb^(2+) ions was 76.34 mg/g at pH 5.The adsorption studies illustrated that adsorption kinetics and isotherm perfectly fitted with the pseudo-second-order kinetics model and Langmuir isotherm,respectively.This work presents a promising protocol to reduce the overall costs in the preparation of renewable adsorbents with good adsorption efficiency and regeneration.
文摘Ultrasound (US)-induced cavitation is an effective way in oxidizing organic contaminants in wastewater either as the independent operation unit or in combination with other oxidation methods. In this paper, black liquor and filtrate after acidifying and settling were sonicated. The effect of working parameters on ultrasonic degradation of black liquor, such as different combination methods, frequency, power supply, initial concentration, pH, duration time, ionic strength and catalyst were studied. The results were as follows: (1) At the conditions of 40kHz, 100W, 4h, pH at 6 and temperature 30?℃, utilizing US/US-H2O2/US-Fenton, weak-orange filtrate turned to colloid with the increase of time and little sediment produced after settling. Especially filtrate came to be milk white collides and upper water approached to nearly achromatic by US-Fenton. Compared with the US, US-H2O2/US-Fenton COD (Chemical oxidation demand) removal ratio can increase 15%, 30% respectively. Because of more hydroxyl radicals produced in the reaction process; (2) At the condition of 100W and 4h, the degradation efficiency of black liquor was better at 40kHz over at 20kHz. Moreover black liquor can be biodegraded easily. Those based on that the big molecule of contaminants in aqueous solution can be changed into the little molecule with ultrasound (3) At the condition of 40kHz and 4h, the COD removal ratio of black liquor was more higher at 60W than at 80W, while the removal ratio of COD at 60W was nearly close to the ratio at 100W; (4) The initial concentration of black liquor influenced the effect of sonochemical degradation; (5) The variation of pH had no effect on degradation; (6) The longer the duration time, the greater the removal ratio of COD. But this ratio increased slowly after 4h; (7) Adding 0.2g/L NaCl to change the ionic strength of the black liquor, the COD removal ratio can increase 10%; (8) The degradation rates increased by the coexistent catalysts of TiO2, Co2+ and Ag+.
基金financial support from the National Natural Science Foundation of China (No. 21576146)
文摘The effects of adding pulping black liquor and other additives to coal-water slurry(CWS) on the sulfur-fixing performance of the resultant mixture(pulping black liquor coal-water slurry) were evaluated. The experimental results demonstrated that the ash content of the black liquor coalwater slurry decreased as the addition of pulping black liquor in the mixture increased. Nevertheless, the addition amount should be appropriately selected to ensure that the black liquor coal-water slurry had a moderate calorific value. Addition of black liquor improved the combustion performance of CWS by lowering the ignition point and stabilizing the combustion process; moreover, the sulfur-fixation ratio after combustion increased by 12 to 16 percentage points than that of CWS, and the content of high-melting-point salt in the ash from CWS after adding black liquor was low. The sulfur-fixing ratio of CWS after adding a sulfur-fixing agent was effectively increased by 25 to 30 percenatge points, but with compromise of the fluidity and stability of the CWS; thus, the addition amount of a sulfur-fixing agent should be optimized.
基金the financial support from the Natural Science Foundation of China (No. 20477041)
文摘A magnesia adsorbent was prepared from straw pulp black liquor and magnesium sulfate for the first time, and its adsorption of phenol from aqueous solution was examined. The characteristics of the adsorbent were tested through chemical analysis, surface analysis, X-ray diffraction and FT-IR spectroscopy. The effects of various factors, such as dose, adsorption time and adsorption temperature, on phenol adsorption behavior were studied. The results show that the adsorption processes can be fitted to the isotherm Langmuir model very well. It was found that the adsorption process was strongly influenced by temperature and the optimal temperature for phenol removal was 40 ℃. The optimum adsorption time was 10 min, and desorption would happen afterwards. Between the models of Langmuir and Freundlich, the adsorption process of phenol onto magnesia fitted the Langmuir equation better.
基金This work was supported by the Guangdong Natural Science Foundation(2017A030312005)Science and Technology Program of Guangzhou City(201707010058).
文摘Environmentally friendly and energy saving treatment of black liquor(BL),a massively produced waste in Kraft papermaking process,still remains a big challenge.Here,by adopting a NieCaOeCa_(12)Al_(14)O_(33) bifunctional catalyst derived from hydrotalcite-like materials,we demonstrate the feasibility of producing high-purity H_(2)(~96%)with 0.9 mol H_(2) mol^(-1) C yield via the sorption enhanced steam reforming(SESR)of BL.The SESRBL performance in terms of H_(2) production maintained stable for 5 cycles,but declined from the 6th cycle.XRD,Raman spectroscopy,elemental analysis and energy dispersive techniques were employed to rationalize the deactivation of the catalyst.It was revealed that gradual sintering and agglomeration of Ni and CaO and associated coking played important roles in catalyst deactivation and performance degradation of SESRBL,while deposition of Na and K from the BL might also be responsible for the declined performance.On the other hand,it was demonstrated that the SESRBL process could effectively reduce the emission of sulfur species by storing it as CaSO_(3).Our results highlight a promising alternative for BL treatment and H_(2) production,thereby being beneficial for pollution control and environment governance in the context of mitigation of climate change.
文摘This paper illustrates the general experiment principle of anaerobic biological cotton pulp black liquor microbial degradation, including the process and result of experiment. The result shows that the decrement of COD may arrive at 80% by the strengthen effect of Photosynthetic Bacteria. The biochemical methane Potential (BMP) and Chemical Oxygen Demand (COD) of cotton pulp black liquor are also measured during the experiment using improved measure method. The equivalent of COD and BMP is verified as a result. Finally analysis is done based on the experiment result.
文摘Analysis on foulants shows that: the elements (except for C, H and O) in foulants formed during evaporating alkaline wheat straw black liquor are Si, Ca , K, Na, Mg and Al; Si and Ca account for about 36% of the weight of foulants; The organic ingredients amout to about 20% of the foulant; Rhodesite (Ca,K,Na)8Si16O40·11H2O is the main composition in foulants. The fouling mechanism of wheat black liquor is quite different from that of soft/hard wood black liquor, because the content of Si inside wheat straw black liquor is much more than that of soft/hard wood black liquor. Complex chemical reactions occur when evaporating wheat straw black liquor. The author considers that colloid H2SiO3 plays an important role in the process. The minerals produced by reactions between H2SiO3, with anion charges and positive ions, such as Ca2+, K+, Na+, etc. Further investigation on the process should be done.The fractal theory is used to analyze the fouling geometric texture. The fractal dimension values D of foulants are also calculated.
文摘The heat transfer properties of black liquor from wheat pulp in a stirring apparatus were studied in this paper. By changing the experiment conditions of temperature-difference driving force, geometry shape and agitator speed, we investigated the heat transfer properties of black liquor from wheat pulp under the conditions of different physical properties, rheological properties, fluid power conditions and the space geometrical characteristics of fluid flow. Furthermore the related mathematical models and evaluation criteria based on the conventional methods and artificial neural networks were established. The experimental results showed that the above-mentioned factors have obvious effect to black liquor from wheat pulp?
文摘Thick black liquor, thin black liquor and solid state sodium hydroxide are added to the liquor treated by sulfur dioxide, then the blended liquor is used to recycle cooking of straw pulp. The black liquor, separated liquor and pulp of every cycles are analyzed respectively. Result shows that the content of lignin and organism in recycle black liquor and separated liquor increases faster in the first three cycles and then continues to increase slowly till four or five times, after that it trends to a stable state. The main organism separated from waste liquor of AS-AQ treated by sulfur dioxide is alkali-lignin, above 50% of total lignin in black liquor. The yield of pulp made from recycle cooking is steady, the hardness of pulp has a great improvement with recycle cooking. The brightness of pulp reduces correspondingly before bleaching, and after bleaching the brightness of pulp is relatively high and steady at the same sodium hypo chlorite dosage.
文摘A novel vapor-liquid-solid circulating fluidized bed evaporator, meaning for enhancing heat transfer and preventing fouling, is applied to wheat straw black liquor, which is the primary pollutant in China’s papermaking industry. It is treated by alkali recovery, in which evaporation is a key process. The experimental results show that the vapor-liquid-solid three-phase boiling heat transfer coefficient is enhanced by 20%～40% than that of vapor-liquid two-phase boiling flow, also, the novel evaporator exhibits an excellent function of fouling prevention.
