In this paper we explore the formation of bars and present the bulge and bar properties and their correlations for a sample of lenticular barred(SB0)and lenticular unbarred(S0)galaxies in the central region of the Com...In this paper we explore the formation of bars and present the bulge and bar properties and their correlations for a sample of lenticular barred(SB0)and lenticular unbarred(S0)galaxies in the central region of the Coma Cluster using HST/ACS data.In our sample,we identified bar features using the luminosity profile decomposition software GALFIT.We classified the bulges based on Sérsic index and Kormendy relation.We found that the average mass of the bulge in SB0 galaxies is 1.48×10^(10)M☉whereas the average mass of the bulge in S0 galaxies is 4.3×10^(10)M☉.We observe that SB0 galaxies show lower bulge concentration,low mass and also smaller B/T values compared to S0 galaxies.Using the Kormendy relation,we found that among the lenticular barred galaxies,82%have classical bulges and 18%have pseudo bulges.These classical bulges have low masses compared to the classical bulges of unbarred galaxies.S0,galaxies with massive classical bulges do not host bars.We also found that for all SB0s the bulge effective radius is less than the bar effective radius.SB0 galaxies with classical bulges suggest that the bar may have formed by mergers.展开更多
Background: Perimembranous ventricular septal defect combined with right coronary cusp bulge generally should be treated with surgical thoracotomy, owing to the potential aortic regurgitation. However, the minimally i...Background: Perimembranous ventricular septal defect combined with right coronary cusp bulge generally should be treated with surgical thoracotomy, owing to the potential aortic regurgitation. However, the minimally invasive method of transcatheter closure has always attracted the attention of cardiologists and patients. The present study aimed to apply transcatheter occlusion in treating ventricular septal defect with right coronary cusp bulge and further evaluate the clinical effect through follow-up. Materials and methods: A total of 40 children diagnosed as having a ventricular septal defect with right coronary cusp bulge, examined using transthoracic echocardiography and cardiovascular angiography, were enrolled in this study. The ventricular septal defects were closed by placing occluders through transcatheter occlusion treatment. During the operation process, the children underwent angiography and transthoracic echocardiography examinations to check the position of the occlude and the extent of aortic regurgitation. The influence of occlusion on the conduction system was evaluated using a surface electrocardiogram. The children were followed up after their procedures. Results: All 40 patients were immediately and successfully occluded. Three patients with filament residual shunts were observed during the operations. No major surgical complications occurred during the perioperative period. During the follow-up period, the positions of all the occluders were good, the residual shunts in the three patients disappeared, and no new or aggravated aortic regurgitation occurred. Electrocardiogram did not reveal any atrioventricular blocks. Only one patient suffered from an incomplete right bundle branch block. Conclusions: Children diagnosed with ventricular septal defect combined with right coronary cusp bulge could be considered for transcatheter occlusion. With appropriate indications and methods, the effect may be favorable.展开更多
In this paper, cold bulge forming of titanium alloy Ti55 was investigated. This process was done successfully and titanium alloy Ti55 was formed completely. Also, in the numerical work, this process has been investiga...In this paper, cold bulge forming of titanium alloy Ti55 was investigated. This process was done successfully and titanium alloy Ti55 was formed completely. Also, in the numerical work, this process has been investigated using Abaqus/ Explicit code. The results show that there is a good agreement between experimental and numerical results. Mechanical properties of Titanium alloy Ti55 have been investigated before and after bulge forming. The results show that mechanical properties of titanium alloy Ti55 have been improved during bulge forming. Also, hardness, and thickness variation tests of sheet metal before and after bulge forming were performed and the same results to mechanical properties were obtained.展开更多
The skin contains various populaions of stem cells, but its characterization has been hampered by lack of markers and unclear location. The hair follicle has a niche for stem cells called a “bulge” which acts as a r...The skin contains various populaions of stem cells, but its characterization has been hampered by lack of markers and unclear location. The hair follicle has a niche for stem cells called a “bulge” which acts as a reservoir of multipotent stem cells. In the study reported here, an immunohistochemical and immunofluorescence analysis was performed on mouse and human tissues in order to determine the possible presence of stem cells of hair follicle through cytokeratin 15 (CK15), CD34, and CD200 markers identified as crucial to the stem cells and to identify the bulge region. Mouse (n = 7) and human (n = 7) skin samples were used. The expression of proteins was determined by the indirect immunoperoxidase technique and a secondary antibody bound to a fluorochrome. The specificity of staining was evaluated by negative controls. The results revealed that the stem cells associated with CD34 and CD200 antibodies were differentially expressed in the interfollicular epidermis, sebaceous glands, and bulge region, indicating that, in mice, CD34 and, in humans, CD200 are more specific than CK15 in detecting bulge cells. It also suggests that CD34 is specific for mouse bulge cells, while CD200 might have specificity for progenitor cells and partially differentiated cells in humans.展开更多
Skin contains various populations of stem cells (SCs). Among these are hair follicle stem cells (HFSCs) in the bulge region. The behavior of HFSCs deserves to be widely studied due to the benefits to be derived from t...Skin contains various populations of stem cells (SCs). Among these are hair follicle stem cells (HFSCs) in the bulge region. The behavior of HFSCs deserves to be widely studied due to the benefits to be derived from their identification, isolation, and amplification. Skin samples of newborn mice (n = 32) and human adults (n = 10) were used, and the bulge region was isolated and cultured. The isolation and characterization of cells were conducted through immunocytochemistry and immunofluorescence, using mainly CD34 and CD200 monoclonal antibodies. Initially, cells grew slowly from the explant around the bulge region, accruing cells with different morphology in both mouse and human, latter being mostly polygonal;the mouse cells reaching confluence faster (5 to 7 days) than the human (12 to 15 days). It was possible to isolate into subcultures cells with small size (10 - 13 μm diameter), round-shape, scant cytoplasm, central prominent nucleus and with nucleolus, which formed colonies, maintaining their phenotype in a high proportion (77% - 83% and 91% in mouse and human, respectively), without showing changes in their morphology during almost 7 months in the mouse cells, and a month and a half in the human. These results demonstrate that the selection, the isolation, and the conditioned mediums allowed population increases of bulge cells and indicate that cultured cells may retain their sternness in that they maintained their phenotypic characteristics, expressed specific markers for SCs, and showed a high proliferative capacity for long periods. Hair follicles, in mice and humans, are important repositories of multipotent stem cells, due to their tendency to differentiate into keratinocytes. Human HFSCs, obtained by depilation, preserve their potential for proliferation and prove to be easily accessible. This suggests that the bulge cells may present an alternative source of autologous stem cells for tissue engineering and regenerative medicine.展开更多
A T-shape tube hydraulic bulge test under axial feeding force is carried out to characterize the mechanical properties of EN AW 5049-O and 6060-O aluminium alloys.The punch displacement,T-branch height and axial compr...A T-shape tube hydraulic bulge test under axial feeding force is carried out to characterize the mechanical properties of EN AW 5049-O and 6060-O aluminium alloys.The punch displacement,T-branch height and axial compressive force are recorded online during the experiment.An intelligent inverse identification framework combining the finite element method and numerical optimization algorithm is developed to determine material parameters by fitting simulated results to the experimental data iteratively.The identified constitutive parameters using the inverse modelling technique are compared with those determined by the theoretical analysis and uniaxial tensile test.The comparison shows that the predicted bulge height and punch force based on the material parameters obtained by the three methods are different and the inverse strategy produces the smallest gap between numerical and experimental values.It is possible to conclude that the hydraulic bulge test can be applied to characterize the stress-strain curve of tubular materials at the large strain scope,and the automatic inverse framework is a more accurate post-processing procedure to identify material constitutive parameters compared with the classical analytical model.展开更多
PCrNi3MoV steel is a medium-carbon,low-alloy quenched and tempered steel that finds its applications in military gun barrels due to the high wear resistance and ablation resistance.To study the penetration and failure...PCrNi3MoV steel is a medium-carbon,low-alloy quenched and tempered steel that finds its applications in military gun barrels due to the high wear resistance and ablation resistance.To study the penetration and failure modes of PCrNi3MoV plates impacted by tungsten spheres,tungsten spheres of various diameters(5 mm,8 mm,and 10 mm)were used to impact PCrNi3MoV steel plates with thicknesses of 6 mm,9 mm,and 14 mm.The penetration performance of the spheres was analyzed for different velocities,and the ultimate penetration velocity of the plate was obtained.It was found that the primary failure modes of the PCrNi3MoV plate were compression pitting failure and shear failure.Using the dimensional analysis method,a relationship between the bulge height of the steel plate and the fragment velocity,an equation for the ultimate penetration velocity,and a relationship between the target penetration energy and the fragment velocity were obtained.Then,a projectile-target action index was proposed to describe the process of tungsten spheres with different velocities impacting target plates.The results suggested that under the same thickness of the target plate,a larger-diameter fragment required more kinetic energy to obtain the same ultimate penetration effect as a smaller-diameter fragment.The equations obtained through dimensional analysis predicted values that agreed well with experimental values,indicating that these equations can be applied to engineering applications.展开更多
Hair follicle stem cells(HFSCs)in the bulge are a multipotent adult stem cell population.They can periodically give rise to new HFs and even regenerate the epidermis and sebaceous glands during wound healing.An increa...Hair follicle stem cells(HFSCs)in the bulge are a multipotent adult stem cell population.They can periodically give rise to new HFs and even regenerate the epidermis and sebaceous glands during wound healing.An increasing number of biomarkers have been used to isolate,label,and trace HFSCs in recent years.Considering more detailed data from single-cell transcriptomics technology,we mainly focus on the important HFSC molecular markers and their regulatory roles in this review.展开更多
We present a study of low surface brightness galaxies(LSBGs) selected by fitting the images for all the galaxies inα.40 SDSS DR7 sample with two kinds of single-component models and two kinds of two-component models(...We present a study of low surface brightness galaxies(LSBGs) selected by fitting the images for all the galaxies inα.40 SDSS DR7 sample with two kinds of single-component models and two kinds of two-component models(disk+bulge):single exponential,single sersic,exponential+deVaucular(exp+deV),and exponential+sérsic(exp+ser).Under the criteria of the B band disk central surface brightness μ_(0,disk)(B)≥22.5 mag arcsec^(-2) and the axis ratio b/a> 0.3,we selected four none-edge-on LSBG samples from each of the models which contain 1105,1038,207,and 75 galaxies,respectively.There are 756 galaxies in common between LSBGs selected by exponential and sersic models,corresponding to 68.42% of LSBGs selected by the exponential model and 72.83% of LSBGs selected by the sersic model,the rest of the discrepancy is due to the difference in obtaining μ_(0) between the exponential and sersic models.Based on the fitting,in the range of 0.5≤n≤1.5,the relation of μ_(0) from two models can be written as μ_(0,sérsic)-μ_(0,exp)=-1.34(n-1).The LSBGs selected by disk+bulge models(LSBG_(2)comps) are more massive than LSBGs selected by single-component models(LSBG_1comp),and also show a larger disk component.Though the bulges in the majority of our LSBG_(2)comps are not prominent,more than 60% of our LSBG_(2)comps will not be selected if we adopt a single-component model only.We also identified 31 giant low surface brightness galaxies(gLSBGs) from LSBG_(2)comps.They are located at the same region in the color-magnitude diagram as other gLSBGs.After we compared different criteria of gLSBGs selection,we find that for gas-rich LSBGs,M_(*)> 10^(10)M_⊙ is the best to distinguish between gLSBGs and normal LSBGs with bulge.展开更多
In order to understand the behavior of RNAs with large bulges in solution, molecular dynamics was performed on the RNA molecule in water with A6 bulge. The result of simulation showed that nonstacked conformation is t...In order to understand the behavior of RNAs with large bulges in solution, molecular dynamics was performed on the RNA molecule in water with A6 bulge. The result of simulation showed that nonstacked conformation is the main conformation in large bulges, and the backbone of large bulge is of great conformational flexibility, but bulges-induced bends are relatively rigid. The fluctuation in bulge has little influence on the bend angle of RNAs.展开更多
The effects of Sr and Y on microstructure,tensile property and free bulge formability of AZ31 alloy sheet produced by twin-roll casting and sequential hot rolling were investigated to improve the mechanical properties...The effects of Sr and Y on microstructure,tensile property and free bulge formability of AZ31 alloy sheet produced by twin-roll casting and sequential hot rolling were investigated to improve the mechanical properties and formability of the AZ31 alloy.Sr and Y addition can form Al4 Sr,Al2 Y and Al3 Y phases which can impede dislocation movement and promote dynamic recrystallization during the rolling deformation and decrease the lattice resistance to dislocation motion by decreasing Al solubility in the alloy,resulting in finer grains,lower dislocation density and no twinning generating in the twin-roll casting and sequential hot rolling(TRC-HR)AZ31-1.3 Sr-1.0 Y alloy.The maximum stress and elongation of the alloy increase significantly after adding Sr and Y.The average cavity and grain sizes of the TRC-HR AZ31-1.3 Sr-1.0 Y alloy are smaller,resulting in higher elongation in the alloy.The addition of Y and Sr can effectively improve the free bulge formability and the thickness uniform of the alloy.The Al4 Sr,Al2 Y and A13 Y phases can inhibit the grain growth by obstructing dislocation motion or grain boundary slip,resulting in smaller grain size of AZ31-1.3 Sr-1.0 Y alloy bulge parts.展开更多
文摘In this paper we explore the formation of bars and present the bulge and bar properties and their correlations for a sample of lenticular barred(SB0)and lenticular unbarred(S0)galaxies in the central region of the Coma Cluster using HST/ACS data.In our sample,we identified bar features using the luminosity profile decomposition software GALFIT.We classified the bulges based on Sérsic index and Kormendy relation.We found that the average mass of the bulge in SB0 galaxies is 1.48×10^(10)M☉whereas the average mass of the bulge in S0 galaxies is 4.3×10^(10)M☉.We observe that SB0 galaxies show lower bulge concentration,low mass and also smaller B/T values compared to S0 galaxies.Using the Kormendy relation,we found that among the lenticular barred galaxies,82%have classical bulges and 18%have pseudo bulges.These classical bulges have low masses compared to the classical bulges of unbarred galaxies.S0,galaxies with massive classical bulges do not host bars.We also found that for all SB0s the bulge effective radius is less than the bar effective radius.SB0 galaxies with classical bulges suggest that the bar may have formed by mergers.
基金supported by the National Science Foundation of China(Grant number 81470443)
文摘Background: Perimembranous ventricular septal defect combined with right coronary cusp bulge generally should be treated with surgical thoracotomy, owing to the potential aortic regurgitation. However, the minimally invasive method of transcatheter closure has always attracted the attention of cardiologists and patients. The present study aimed to apply transcatheter occlusion in treating ventricular septal defect with right coronary cusp bulge and further evaluate the clinical effect through follow-up. Materials and methods: A total of 40 children diagnosed as having a ventricular septal defect with right coronary cusp bulge, examined using transthoracic echocardiography and cardiovascular angiography, were enrolled in this study. The ventricular septal defects were closed by placing occluders through transcatheter occlusion treatment. During the operation process, the children underwent angiography and transthoracic echocardiography examinations to check the position of the occlude and the extent of aortic regurgitation. The influence of occlusion on the conduction system was evaluated using a surface electrocardiogram. The children were followed up after their procedures. Results: All 40 patients were immediately and successfully occluded. Three patients with filament residual shunts were observed during the operations. No major surgical complications occurred during the perioperative period. During the follow-up period, the positions of all the occluders were good, the residual shunts in the three patients disappeared, and no new or aggravated aortic regurgitation occurred. Electrocardiogram did not reveal any atrioventricular blocks. Only one patient suffered from an incomplete right bundle branch block. Conclusions: Children diagnosed with ventricular septal defect combined with right coronary cusp bulge could be considered for transcatheter occlusion. With appropriate indications and methods, the effect may be favorable.
文摘In this paper, cold bulge forming of titanium alloy Ti55 was investigated. This process was done successfully and titanium alloy Ti55 was formed completely. Also, in the numerical work, this process has been investigated using Abaqus/ Explicit code. The results show that there is a good agreement between experimental and numerical results. Mechanical properties of Titanium alloy Ti55 have been investigated before and after bulge forming. The results show that mechanical properties of titanium alloy Ti55 have been improved during bulge forming. Also, hardness, and thickness variation tests of sheet metal before and after bulge forming were performed and the same results to mechanical properties were obtained.
文摘The skin contains various populaions of stem cells, but its characterization has been hampered by lack of markers and unclear location. The hair follicle has a niche for stem cells called a “bulge” which acts as a reservoir of multipotent stem cells. In the study reported here, an immunohistochemical and immunofluorescence analysis was performed on mouse and human tissues in order to determine the possible presence of stem cells of hair follicle through cytokeratin 15 (CK15), CD34, and CD200 markers identified as crucial to the stem cells and to identify the bulge region. Mouse (n = 7) and human (n = 7) skin samples were used. The expression of proteins was determined by the indirect immunoperoxidase technique and a secondary antibody bound to a fluorochrome. The specificity of staining was evaluated by negative controls. The results revealed that the stem cells associated with CD34 and CD200 antibodies were differentially expressed in the interfollicular epidermis, sebaceous glands, and bulge region, indicating that, in mice, CD34 and, in humans, CD200 are more specific than CK15 in detecting bulge cells. It also suggests that CD34 is specific for mouse bulge cells, while CD200 might have specificity for progenitor cells and partially differentiated cells in humans.
文摘Skin contains various populations of stem cells (SCs). Among these are hair follicle stem cells (HFSCs) in the bulge region. The behavior of HFSCs deserves to be widely studied due to the benefits to be derived from their identification, isolation, and amplification. Skin samples of newborn mice (n = 32) and human adults (n = 10) were used, and the bulge region was isolated and cultured. The isolation and characterization of cells were conducted through immunocytochemistry and immunofluorescence, using mainly CD34 and CD200 monoclonal antibodies. Initially, cells grew slowly from the explant around the bulge region, accruing cells with different morphology in both mouse and human, latter being mostly polygonal;the mouse cells reaching confluence faster (5 to 7 days) than the human (12 to 15 days). It was possible to isolate into subcultures cells with small size (10 - 13 μm diameter), round-shape, scant cytoplasm, central prominent nucleus and with nucleolus, which formed colonies, maintaining their phenotype in a high proportion (77% - 83% and 91% in mouse and human, respectively), without showing changes in their morphology during almost 7 months in the mouse cells, and a month and a half in the human. These results demonstrate that the selection, the isolation, and the conditioned mediums allowed population increases of bulge cells and indicate that cultured cells may retain their sternness in that they maintained their phenotypic characteristics, expressed specific markers for SCs, and showed a high proliferative capacity for long periods. Hair follicles, in mice and humans, are important repositories of multipotent stem cells, due to their tendency to differentiate into keratinocytes. Human HFSCs, obtained by depilation, preserve their potential for proliferation and prove to be easily accessible. This suggests that the bulge cells may present an alternative source of autologous stem cells for tissue engineering and regenerative medicine.
基金The first author was supported by China Scholarship Council(CSC)(201706080020)from the Ministry of Education of China and expresses his appreciation to CSC for their financial support。
文摘A T-shape tube hydraulic bulge test under axial feeding force is carried out to characterize the mechanical properties of EN AW 5049-O and 6060-O aluminium alloys.The punch displacement,T-branch height and axial compressive force are recorded online during the experiment.An intelligent inverse identification framework combining the finite element method and numerical optimization algorithm is developed to determine material parameters by fitting simulated results to the experimental data iteratively.The identified constitutive parameters using the inverse modelling technique are compared with those determined by the theoretical analysis and uniaxial tensile test.The comparison shows that the predicted bulge height and punch force based on the material parameters obtained by the three methods are different and the inverse strategy produces the smallest gap between numerical and experimental values.It is possible to conclude that the hydraulic bulge test can be applied to characterize the stress-strain curve of tubular materials at the large strain scope,and the automatic inverse framework is a more accurate post-processing procedure to identify material constitutive parameters compared with the classical analytical model.
文摘PCrNi3MoV steel is a medium-carbon,low-alloy quenched and tempered steel that finds its applications in military gun barrels due to the high wear resistance and ablation resistance.To study the penetration and failure modes of PCrNi3MoV plates impacted by tungsten spheres,tungsten spheres of various diameters(5 mm,8 mm,and 10 mm)were used to impact PCrNi3MoV steel plates with thicknesses of 6 mm,9 mm,and 14 mm.The penetration performance of the spheres was analyzed for different velocities,and the ultimate penetration velocity of the plate was obtained.It was found that the primary failure modes of the PCrNi3MoV plate were compression pitting failure and shear failure.Using the dimensional analysis method,a relationship between the bulge height of the steel plate and the fragment velocity,an equation for the ultimate penetration velocity,and a relationship between the target penetration energy and the fragment velocity were obtained.Then,a projectile-target action index was proposed to describe the process of tungsten spheres with different velocities impacting target plates.The results suggested that under the same thickness of the target plate,a larger-diameter fragment required more kinetic energy to obtain the same ultimate penetration effect as a smaller-diameter fragment.The equations obtained through dimensional analysis predicted values that agreed well with experimental values,indicating that these equations can be applied to engineering applications.
基金National Natural Science Foundation of China,No.82173446the Youth Training Program of the Army Medical University,No.2018XQN01.
文摘Hair follicle stem cells(HFSCs)in the bulge are a multipotent adult stem cell population.They can periodically give rise to new HFs and even regenerate the epidermis and sebaceous glands during wound healing.An increasing number of biomarkers have been used to isolate,label,and trace HFSCs in recent years.Considering more detailed data from single-cell transcriptomics technology,we mainly focus on the important HFSC molecular markers and their regulatory roles in this review.
基金supported by the National Key R&D Program of China (grant No.2022YFA1602901)support of the National Natural Science Foundation of China(NSFC) grant Nos. 12090040, 12090041, and 12003043+5 种基金supported by the Youth Innovation Promotion AssociationCAS (No. 2020057)the science research grants of CSST from the China Manned Space Projectsupport of the NSFC grant Nos.11733006 and U1931109supported by the Strategic Priority Research Program of the Chinese Academy of Sciences,Grant No. XDB0550100partially supported by the Open Project Program of the Key Laboratory of Optical Astronomy,National Astronomical Observatories,Chinese Academy of Sciences。
文摘We present a study of low surface brightness galaxies(LSBGs) selected by fitting the images for all the galaxies inα.40 SDSS DR7 sample with two kinds of single-component models and two kinds of two-component models(disk+bulge):single exponential,single sersic,exponential+deVaucular(exp+deV),and exponential+sérsic(exp+ser).Under the criteria of the B band disk central surface brightness μ_(0,disk)(B)≥22.5 mag arcsec^(-2) and the axis ratio b/a> 0.3,we selected four none-edge-on LSBG samples from each of the models which contain 1105,1038,207,and 75 galaxies,respectively.There are 756 galaxies in common between LSBGs selected by exponential and sersic models,corresponding to 68.42% of LSBGs selected by the exponential model and 72.83% of LSBGs selected by the sersic model,the rest of the discrepancy is due to the difference in obtaining μ_(0) between the exponential and sersic models.Based on the fitting,in the range of 0.5≤n≤1.5,the relation of μ_(0) from two models can be written as μ_(0,sérsic)-μ_(0,exp)=-1.34(n-1).The LSBGs selected by disk+bulge models(LSBG_(2)comps) are more massive than LSBGs selected by single-component models(LSBG_1comp),and also show a larger disk component.Though the bulges in the majority of our LSBG_(2)comps are not prominent,more than 60% of our LSBG_(2)comps will not be selected if we adopt a single-component model only.We also identified 31 giant low surface brightness galaxies(gLSBGs) from LSBG_(2)comps.They are located at the same region in the color-magnitude diagram as other gLSBGs.After we compared different criteria of gLSBGs selection,we find that for gas-rich LSBGs,M_(*)> 10^(10)M_⊙ is the best to distinguish between gLSBGs and normal LSBGs with bulge.
基金This work was supported by the National Natural Science Foundation of China (Grant No. 39770418) the Knowledge Innovation Program of the Chinese Academy of Sciences (Grant No. KJCX1-08).
文摘In order to understand the behavior of RNAs with large bulges in solution, molecular dynamics was performed on the RNA molecule in water with A6 bulge. The result of simulation showed that nonstacked conformation is the main conformation in large bulges, and the backbone of large bulge is of great conformational flexibility, but bulges-induced bends are relatively rigid. The fluctuation in bulge has little influence on the bend angle of RNAs.
基金financially supported by the National Natural Science Foundation of China(Nos.51705038 and51875053)the Natural Science Foundation of Jiangsu Province of China(No.BK20150268)。
文摘The effects of Sr and Y on microstructure,tensile property and free bulge formability of AZ31 alloy sheet produced by twin-roll casting and sequential hot rolling were investigated to improve the mechanical properties and formability of the AZ31 alloy.Sr and Y addition can form Al4 Sr,Al2 Y and Al3 Y phases which can impede dislocation movement and promote dynamic recrystallization during the rolling deformation and decrease the lattice resistance to dislocation motion by decreasing Al solubility in the alloy,resulting in finer grains,lower dislocation density and no twinning generating in the twin-roll casting and sequential hot rolling(TRC-HR)AZ31-1.3 Sr-1.0 Y alloy.The maximum stress and elongation of the alloy increase significantly after adding Sr and Y.The average cavity and grain sizes of the TRC-HR AZ31-1.3 Sr-1.0 Y alloy are smaller,resulting in higher elongation in the alloy.The addition of Y and Sr can effectively improve the free bulge formability and the thickness uniform of the alloy.The Al4 Sr,Al2 Y and A13 Y phases can inhibit the grain growth by obstructing dislocation motion or grain boundary slip,resulting in smaller grain size of AZ31-1.3 Sr-1.0 Y alloy bulge parts.
