Photothermal catalytic CO_(2) conversion provides an effective solution targeting carbon neutrality by synergistic utilization of photon and heat.However,the C-C coupling initiated by photothermal catalysis is still a...Photothermal catalytic CO_(2) conversion provides an effective solution targeting carbon neutrality by synergistic utilization of photon and heat.However,the C-C coupling initiated by photothermal catalysis is still a big challenge.Herein,a three-dimensional(3D)hierarchical W_(18)O_(49)/WTe_(2) hollow nanosphere is constructed through in-situ embodying of oxygen vacancy and tellurium on the scaffold of WO_(3).The light absorption towards near-infrared spectral region and CO_(2) adsorption are enhanced by the formation of half-metal WTe_(2) and the unique hierarchical hollow architecture.Combining with the generation of oxygen vacancy with strengthened CO_(2) capture,the photothermal effect on the samples can be sufficiently exploited for activating the CO_(2) molecules.In particular,the close contact between W_(18)O_(49)and WTe_(2) largely promotes the photoinduced charge separation and mass transfer,and thus the~*CHO intermediate formation and fixedness are facilitated.As a result,the C-C coupling can be evoked between tungsten and tellurium atoms on WTe_(2).The ethylene production by optimized W_(18)O_(49)/WTe_(2) reaches 147.6μmol g^(-1)with the selectivity of 80%.The in-situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS)and density functional theory(DFT)calculations are performed to unveil the presence and significance of aldehyde intermediate groups in C-C coupling.The half-metallic WTe_(2) cocatalyst proposes a new approach for efficient CO_(2) conversion with solar energy,and may especially create a new platform for the generation of multi-carbon products.展开更多
The present study concerns the revalorization of drained water from aquaculture ponds rearing Clarias gariepinus on okra crops. The rearing was carried out at the farm of Gaston Berger University in 100 m2 ponds. In e...The present study concerns the revalorization of drained water from aquaculture ponds rearing Clarias gariepinus on okra crops. The rearing was carried out at the farm of Gaston Berger University in 100 m2 ponds. In each pond, the individuals of C. garipinus with an average weight of 6 ± 0.3 g were stocked at a density of 11 per m2. The water temperature and pH were measured during the experiment. The control fishing is carried out every month to monitor variations in the weight and size of reared individuals. The plant production is carried out in elementary plots measuring 3 m × 1.5 m. Each plot was fertilized with either: drained water from C. gariepinus rearing (DWC), poultry droppings (PD), cow dung (CD) and mineral fertilizer (NPK). Treatments are carried out in tripliqua with either river water (RW), RW + the recommended dose of NPK (RD-NPK), RW + RD-PD, RW + RD-CD, DWC, DWC + 25% RD-NPK, DWC + 50% RD-NPK, DWC + 75% RD-NPK, DWC + 25% RD-PD, DWC + 50% RD-PD, DWC + 75% RD-PD, DWC + 25% RD-CD, DWC + 50% RD-CD, DWC + 75% RD-CD. Growth parameters and yield of okra were determined. The average temperature in the rearing environment was 27.6 ± 1.5˚C and pH 7.9 ± 1.1. After six (06) months of rearing, C. gariepinus individuals reached an average weight of 850.12 ± 1.3 g and an average height of 52.44 ± 1.1 cm. The daily weight gain and specific growth rates over this period were 3.9 g per day and 2.8% per day, respectively. The treatment T1 (RW + DR-NPK) gave the highest mean collar diameter and mean plant height with 2.3 ± 0.9 cm and 61.6 ± 32 cm, respectively. In T4 (DWC), the mean height of plants was 38.8 ± 23.5 cm and mean collar diameter 1.4 ± 0.8 cm. The growth performance in T4 was comparable to that of RD-CD (T3), but different from RD-NPK (T1) and RD-PD (T2). The highest average number, average weight, average length and average diameter of fruits were noted in treatments T13 (RW + RD-75%CD) and T7 (DWC + 75% RD-NPK). The best yields were noted in T1 (RW + RD-NPK) = 10.8 ± 5.4 t·ha−1, T5 (DWC + 25% RD-NPK) = 9.2 ± 4.6 t·ha−1 and T4 (DWC) = 8.6 ± 4.3 t·ha−1 which are comparable and higher than those obtained in T2 = 5.7 ± 2.8 t·ha−1 and T3 = 7.5 ± 3.8 t·ha−1.展开更多
Electrochemical CO reduction reaction(CORR) provides a promising approach for producing valuable multicarbon products(C_(2+)), while the low solubility of CO in aqueous solution and high energy barrier of C–C couplin...Electrochemical CO reduction reaction(CORR) provides a promising approach for producing valuable multicarbon products(C_(2+)), while the low solubility of CO in aqueous solution and high energy barrier of C–C coupling as well as the competing hydrogen evolution reaction(HER) largely limit the efficiency for C_(2+)production in CORR. Here we report an overturn on the Faradaic efficiency of CORR from being HER-dominant to C_(2+)formation-dominant over a wide potential window, accompanied by a significant activity enhancement over a Moss-like Cu catalyst via pressuring CO. With the CO pressure rising from 1 to 40 atm, the C_(2+)Faradaic efficiency and partial current density remarkably increase from 22.8%and 18.9 mA cm^(-2)to 89.7% and 116.7 mA cm^(-2), respectively. Experimental and theoretical investigations reveal that high pressure-induced high CO coverage on metallic Cu surface weakens the Cu–C bond via reducing electron transfer from Cu to adsorbed CO and restrains hydrogen adsorption, which significantly facilitates the C–C coupling while suppressing HER on the predominant Cu(111) surface, thereby boosting the CO electroreduction to C_(2+)activity.展开更多
Owing to the utilization of lithium metal as anode with the ultrahigh theoretical capacity density of 3860 mA h g^(-1)and oxide-based ceramic solid-state electrolytes(SE),e.g.,garnet-type Li7La_(3)Zr_(2)O_(12)(LLZO),a...Owing to the utilization of lithium metal as anode with the ultrahigh theoretical capacity density of 3860 mA h g^(-1)and oxide-based ceramic solid-state electrolytes(SE),e.g.,garnet-type Li7La_(3)Zr_(2)O_(12)(LLZO),all-state-state lithium metal batteries(ASLMBs)have been widely accepted as the promising alternatives for providing the satisfactory energy density and safety.However,its applications are still challenged by plenty of technical and scientific issues.In this contribution,the co-sintering temperature at 500℃is proved as a compromise method to fabricate the composite cathode with structural integrity and declined capacity fading of LiNi_(0.5)Co_(0.2)Mn_(0.3)O_(2)(NCM).On the other hand,it tends to form weaker grain boundary(GB)inside polycrystalline LLZO at inadequate sintering temperature for LLZO,which can induce the intergranular failure of SE during the growth of Li filament inside the unavoidable defect on the interface of SE.Therefore,increasing the strength of GB,refining the grain to 0.4μm,and precluding the interfacial defect are suggested to postpone the electro-chemo-mechanical failure of SE with weak GB.Moreover,the advanced sintering techniques to lower the co-sintering temperature for both NCM-LLZO composite cathode and LLZO SE can be posted out to realize the viability of state-of-the-art ASLMBs with higher energy density as well as the guaranteed safety.展开更多
基金the National Natural Science Foundation of China(51303083)the National Natural Science Foundation of China for Excellent Young Scholars(51922050)+1 种基金the Natural Science Foundation of Jiangsu Province(BK20191293)the Fundamental Research Funds for the Central Universities(30920021123)。
文摘Photothermal catalytic CO_(2) conversion provides an effective solution targeting carbon neutrality by synergistic utilization of photon and heat.However,the C-C coupling initiated by photothermal catalysis is still a big challenge.Herein,a three-dimensional(3D)hierarchical W_(18)O_(49)/WTe_(2) hollow nanosphere is constructed through in-situ embodying of oxygen vacancy and tellurium on the scaffold of WO_(3).The light absorption towards near-infrared spectral region and CO_(2) adsorption are enhanced by the formation of half-metal WTe_(2) and the unique hierarchical hollow architecture.Combining with the generation of oxygen vacancy with strengthened CO_(2) capture,the photothermal effect on the samples can be sufficiently exploited for activating the CO_(2) molecules.In particular,the close contact between W_(18)O_(49)and WTe_(2) largely promotes the photoinduced charge separation and mass transfer,and thus the~*CHO intermediate formation and fixedness are facilitated.As a result,the C-C coupling can be evoked between tungsten and tellurium atoms on WTe_(2).The ethylene production by optimized W_(18)O_(49)/WTe_(2) reaches 147.6μmol g^(-1)with the selectivity of 80%.The in-situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS)and density functional theory(DFT)calculations are performed to unveil the presence and significance of aldehyde intermediate groups in C-C coupling.The half-metallic WTe_(2) cocatalyst proposes a new approach for efficient CO_(2) conversion with solar energy,and may especially create a new platform for the generation of multi-carbon products.
文摘The present study concerns the revalorization of drained water from aquaculture ponds rearing Clarias gariepinus on okra crops. The rearing was carried out at the farm of Gaston Berger University in 100 m2 ponds. In each pond, the individuals of C. garipinus with an average weight of 6 ± 0.3 g were stocked at a density of 11 per m2. The water temperature and pH were measured during the experiment. The control fishing is carried out every month to monitor variations in the weight and size of reared individuals. The plant production is carried out in elementary plots measuring 3 m × 1.5 m. Each plot was fertilized with either: drained water from C. gariepinus rearing (DWC), poultry droppings (PD), cow dung (CD) and mineral fertilizer (NPK). Treatments are carried out in tripliqua with either river water (RW), RW + the recommended dose of NPK (RD-NPK), RW + RD-PD, RW + RD-CD, DWC, DWC + 25% RD-NPK, DWC + 50% RD-NPK, DWC + 75% RD-NPK, DWC + 25% RD-PD, DWC + 50% RD-PD, DWC + 75% RD-PD, DWC + 25% RD-CD, DWC + 50% RD-CD, DWC + 75% RD-CD. Growth parameters and yield of okra were determined. The average temperature in the rearing environment was 27.6 ± 1.5˚C and pH 7.9 ± 1.1. After six (06) months of rearing, C. gariepinus individuals reached an average weight of 850.12 ± 1.3 g and an average height of 52.44 ± 1.1 cm. The daily weight gain and specific growth rates over this period were 3.9 g per day and 2.8% per day, respectively. The treatment T1 (RW + DR-NPK) gave the highest mean collar diameter and mean plant height with 2.3 ± 0.9 cm and 61.6 ± 32 cm, respectively. In T4 (DWC), the mean height of plants was 38.8 ± 23.5 cm and mean collar diameter 1.4 ± 0.8 cm. The growth performance in T4 was comparable to that of RD-CD (T3), but different from RD-NPK (T1) and RD-PD (T2). The highest average number, average weight, average length and average diameter of fruits were noted in treatments T13 (RW + RD-75%CD) and T7 (DWC + 75% RD-NPK). The best yields were noted in T1 (RW + RD-NPK) = 10.8 ± 5.4 t·ha−1, T5 (DWC + 25% RD-NPK) = 9.2 ± 4.6 t·ha−1 and T4 (DWC) = 8.6 ± 4.3 t·ha−1 which are comparable and higher than those obtained in T2 = 5.7 ± 2.8 t·ha−1 and T3 = 7.5 ± 3.8 t·ha−1.
基金financial support from the National Key R&D Program of China (Nos. 2022YFA1504500, 2022YFA1503100)the National Natural Science Foundation of China (Nos. 21988101, 21890753, 22225204, 92145301, 22002160 and 22272174)+4 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences (No. XDB36030200)the CAS Project for Young Scientists in Basic Research (No. YSBR-028)the Fundamental Research Funds for the Central Universities (No. 20720220008)the Dalian National Lab for Clean Energy (DNL Cooperation Fund 202001)the Innovation Research Fund Project of DICP (No. DICP I202016)。
文摘Electrochemical CO reduction reaction(CORR) provides a promising approach for producing valuable multicarbon products(C_(2+)), while the low solubility of CO in aqueous solution and high energy barrier of C–C coupling as well as the competing hydrogen evolution reaction(HER) largely limit the efficiency for C_(2+)production in CORR. Here we report an overturn on the Faradaic efficiency of CORR from being HER-dominant to C_(2+)formation-dominant over a wide potential window, accompanied by a significant activity enhancement over a Moss-like Cu catalyst via pressuring CO. With the CO pressure rising from 1 to 40 atm, the C_(2+)Faradaic efficiency and partial current density remarkably increase from 22.8%and 18.9 mA cm^(-2)to 89.7% and 116.7 mA cm^(-2), respectively. Experimental and theoretical investigations reveal that high pressure-induced high CO coverage on metallic Cu surface weakens the Cu–C bond via reducing electron transfer from Cu to adsorbed CO and restrains hydrogen adsorption, which significantly facilitates the C–C coupling while suppressing HER on the predominant Cu(111) surface, thereby boosting the CO electroreduction to C_(2+)activity.
基金the National Natural Science Foundation of China(12102328)for supporting this work。
文摘Owing to the utilization of lithium metal as anode with the ultrahigh theoretical capacity density of 3860 mA h g^(-1)and oxide-based ceramic solid-state electrolytes(SE),e.g.,garnet-type Li7La_(3)Zr_(2)O_(12)(LLZO),all-state-state lithium metal batteries(ASLMBs)have been widely accepted as the promising alternatives for providing the satisfactory energy density and safety.However,its applications are still challenged by plenty of technical and scientific issues.In this contribution,the co-sintering temperature at 500℃is proved as a compromise method to fabricate the composite cathode with structural integrity and declined capacity fading of LiNi_(0.5)Co_(0.2)Mn_(0.3)O_(2)(NCM).On the other hand,it tends to form weaker grain boundary(GB)inside polycrystalline LLZO at inadequate sintering temperature for LLZO,which can induce the intergranular failure of SE during the growth of Li filament inside the unavoidable defect on the interface of SE.Therefore,increasing the strength of GB,refining the grain to 0.4μm,and precluding the interfacial defect are suggested to postpone the electro-chemo-mechanical failure of SE with weak GB.Moreover,the advanced sintering techniques to lower the co-sintering temperature for both NCM-LLZO composite cathode and LLZO SE can be posted out to realize the viability of state-of-the-art ASLMBs with higher energy density as well as the guaranteed safety.