An integrated 3.3V/1.2V SC DC-DC converter operating under 10MHz with a fixed duty radio of 0.5 is presented.To improve the output current of the converter,CMOS technology is adopted to fabricate the switching devices...An integrated 3.3V/1.2V SC DC-DC converter operating under 10MHz with a fixed duty radio of 0.5 is presented.To improve the output current of the converter,CMOS technology is adopted to fabricate the switching devices,and mutually compensatory circuitry technology is also employed to double the output current furthermore.The simulation results using Hspice simulation software,show that the output currents of a single unit circuit and two unit circuits connected in a mutually compensatory manner of the improved converter is about 12.5mA and 26mA,respectively.The power conversion efficiency of the mutually compensatory circuit can amount to 73%,while its output voltage ripple is less than 1.5%.The converter is fabricated in standard Rohm 0.35μm CMOS technology in Tokyo University of Japan.The test result indicates that the output current of 9.8mA can be obtained from a single unit circuit of the improved converter.展开更多
A specially designed experiment is performed for investigating gate-induced drain leakage （GIDL） current in 90nm CMOS technology using lightly-doped drain （LDD） NMOSFET. This paper shows that the drain bias VD has...A specially designed experiment is performed for investigating gate-induced drain leakage （GIDL） current in 90nm CMOS technology using lightly-doped drain （LDD） NMOSFET. This paper shows that the drain bias VD has a strong effect on GIDL current as compared with the gate bias VG at the same drain-gate voltage VDG. It is found that the difference between ID in the off-state ID - VG characteristics and the corresponding one in the off-state ID - VD characteristics, which is defined as IDIFF, versus VDG shows a peak. The difference between the influences of VD and VG on GIDL current is shown quantitatively by IDIFF, especially in 90nm scale. The difference is due to different hole tunnellings, Furthermore, the maximum IDIFF（IDIFF,MAX） varies linearly with VDG in logarithmic coordiuates and also VDG at IDIFF,MAX with VF which is the characteristic voltage of IDIFF, The relations are studied and some related expressions are given.展开更多
The wedge-shaped and leaf-type silicon light-emitting devices(LED)are designed and fabricated with the Singapore Chartered Semi Inc.'s dual-gate standard 0.35μm CMOS process.The basic structure of the two devices...The wedge-shaped and leaf-type silicon light-emitting devices(LED)are designed and fabricated with the Singapore Chartered Semi Inc.'s dual-gate standard 0.35μm CMOS process.The basic structure of the two devices is N well-P+ junction.P+ area is the wedge-shaped structure,which is embedded in N well.The leaf-type silicon LED device is a combination of the three wedge-shaped LED devices.The main difference between the two devices is their different electrode distribution,which is mainly in order to analyze the application of electric field confinement(EFC).The devices' micrographs were measured with the Olympus IC test microscope.The forward and reverse bias electrical characteristics of the devices were tested.Light measurements of the devices show that the electrode layout is very important when the electric field confinement is applied.展开更多
A frequency servo system-on-chip(FS-SoC)featuring output power stabilization technology is introduced in this study for high-precision and miniaturized cesium(Cs)atomic clocks.The proposed power stabilization loop(PSL...A frequency servo system-on-chip(FS-SoC)featuring output power stabilization technology is introduced in this study for high-precision and miniaturized cesium(Cs)atomic clocks.The proposed power stabilization loop(PSL)technique,incorporating an off-chip power detector(PD),ensures that the output power of the FS-SoC remains stable,mitigating the impact of power fluctuations on the atomic clock's stability.Additionally,a one-pulse-per-second(1PPS)is employed to syn-chronize the clock with GPS.Fabricated using 65 nm CMOS technology,the measured phase noise of the FS-SoC stands at-69.5 dBc/Hz@100 Hz offset and-83.9 dBc/Hz@1 kHz offset,accompanied by a power dissipation of 19.7 mW.The Cs atomic clock employing the proposed FS-SoC and PSL obtains an Allan deviation of 1.7×10^(-11) with 1-s averaging time.展开更多
It is predicted that CMOS technology will probably enter into 22 nm node around 2012. Scaling of CMOS logic technology from 32 to 22 nm node meets more critical issues and needs some significant changes of the technol...It is predicted that CMOS technology will probably enter into 22 nm node around 2012. Scaling of CMOS logic technology from 32 to 22 nm node meets more critical issues and needs some significant changes of the technology, as well as integration of the advanced processes. This paper will review the key processing technologies which can be potentially integrated into 22 nm and beyond technology nodes, including double patterning technology with high NA water immersion lithography and EUV lithography, new device architectures, high K/metal gate （HK/MG） stack and integration technology, mobility enhancement technologies, source/drain engineering and advanced copper interconnect technology with ultra-low-k process.展开更多
The development of next 32 nm generation and below needs innovations on not only device structures, but also fabrication techniques and material selections. Among those promising technologies, new gate structures as h...The development of next 32 nm generation and below needs innovations on not only device structures, but also fabrication techniques and material selections. Among those promising technologies, new gate structures as high-κ gate dielectric and metal gate, strain channel carrier mobility enhancement technology, and novel non-planar MOSFET structures are all possible candidate technologies. In this paper, we will specify our discussion on the research progress of high-κ-metal gate and non-planar MOSFET-technologies that are suitable to 32 nm technology node and beyond.展开更多
This design is presented of a 2 × 2 planar array, with a half-wave dipole antenna to be its element, on a new substrate material, Schott Borofloat, with CMOS technology in the 60 GHz band. In the proposed structu...This design is presented of a 2 × 2 planar array, with a half-wave dipole antenna to be its element, on a new substrate material, Schott Borofloat, with CMOS technology in the 60 GHz band. In the proposed structure, all the designs are based on the CMOS technology and similar performance could be achieved with the same size in contrast to the design on low-temperature co-fired ceramic （LTCC）. This could lead to the improving of the compatibility with the CMOS IC process, the design cost and the design precision which is restricted in the LTCC process. The simulated-10 dB bandwidth of the array is from 58 to 64 GHz. A peak gain of 9.4 dBi is achieved. Good agreement on return loss is achieved between simulations and measurements.展开更多
A low power and low voltage∑△analog-to-digital modulator is realized with digital CMOS technology, which is due to full compensated depletion mode capacitors.Compared with mixed signal technology,this type of modula...A low power and low voltage∑△analog-to-digital modulator is realized with digital CMOS technology, which is due to full compensated depletion mode capacitors.Compared with mixed signal technology,this type of modulator is more compatible for pure digital applications.A pseudo-two-stage class-AB OTA is used in switchedcapacitor integrators for low voltage and low power.The modulator is realized in standard SMIC 0.18μm 1P6M digital CMOS technology.Measured results show that with 1.2 V supply voltage and a 6 MHz sample clock,the dynamic range of the modulator is 84 dB and the total power dissipation is 2460μW.展开更多
A monolithic 10GHz LC voltage-controlled oscillator （VCO） is implemented in standard 0.25μm CMOS technology. The VCO adopts an optimized symmetric circular inductor with center-tap, an accumulation-mode MOS （A-MOS...A monolithic 10GHz LC voltage-controlled oscillator （VCO） is implemented in standard 0.25μm CMOS technology. The VCO adopts an optimized symmetric circular inductor with center-tap, an accumulation-mode MOS （A-MOS） varactor in series with a passive metal-isolator-metal capacitor （MIM-CAP） and a tail current source with an LC filter to operate with high-frequency and low-noise resulting in - 103.2dBc/Hz at 1MHz offset from carrier frequency of 10.2GHz and approximately 11.5% tuning range. With a 3.3V supply voltage, the core circuit consumes 9.9mW. The chip area is 0.67mm × 0.58mm.展开更多
A quadrature modulator and an up-conversion mixer for an 802. lla wireless LAN system are designed and fabricated in 0.18μm gate length standard CMOS technology. A current feedback loop with a transconductor is used ...A quadrature modulator and an up-conversion mixer for an 802. lla wireless LAN system are designed and fabricated in 0.18μm gate length standard CMOS technology. A current feedback loop with a transconductor is used to improve the linearity of the quadrature modulator;An LC resonant tank is used as the load of the upconversion mixer to improve its gain and increase the voltage swing. The measurement results show that the input P1dB achieves -3.6dBm, the transducer power gain of the circuit is -3.6dB,and the current consumes about 45.8mA with a 1.8V power supply.展开更多
This paper presents a 155Mbps limiting amplifier for STM-1 systems of SDH optical communication. It is implemented in CSMC 0.5μm CMOS technology. Under a supply voltage of 3.3V, it has a power consumption of 198mW. T...This paper presents a 155Mbps limiting amplifier for STM-1 systems of SDH optical communication. It is implemented in CSMC 0.5μm CMOS technology. Under a supply voltage of 3.3V, it has a power consumption of 198mW. The core of the circuit is composed of 6 cascaded amplifiers that are in a conventional structure of differential pairs,an output buffer, and a DC offset cancellation feedback loop. The small signal gain can be adjusted from 74 to 44dB by an off-chip resistor. The chip was packaged before being tested. The experimental results indicate that the circuit has an input dynamic range of 54dB and provides a single-ended output swing of 950mV. Its output eye diagram remains satisfactory when the pseudo-random bit sequence （PRBS） input speed reaches 400Mbps.展开更多
According to the international technology roadmap for semiconductors （ITRS）,32nm technology node will be introduced around 2009. Scaling of CMOS logic devices from 45 to 32nm node has come across significant barrier...According to the international technology roadmap for semiconductors （ITRS）,32nm technology node will be introduced around 2009. Scaling of CMOS logic devices from 45 to 32nm node has come across significant barriers. Overcoming these pitch-scaling induced barriers requires integrating the most advanced process technologies into product manufacturing. This paper reviews and discusses new technology applications that could be potentially integrated into 32nm node in the following areas：extension of immersion lithography,mobility enhancement substrate technology,metal/ high-k （MHK） gate stack, ultra-shallow junction （USJ） and other strain enhancement engineering methods, including stress proximity effect （SPT）, dual stress liner （DSL）, stress memorization technique （SMT）, high aspect ratio process （HARP） for STI and PMD,embedded SiGe （for pFET） and SiC （for nFET） source/drain （S/D） using selective epitaxial growth （SEG） method,metallization for middle of line （MOL） and back-end of line （BEOL） ,and ultra low-k （ULK） integration.展开更多
A design of a ll. 6-GHz phase-locked loop （PLL） fabricated in 49-GHz 0. 18-μm CMOS （complementary metal-oxide-semiconductor transistor） technology is described. An analog multiplier phase detector （PD）, a one-p...A design of a ll. 6-GHz phase-locked loop （PLL） fabricated in 49-GHz 0. 18-μm CMOS （complementary metal-oxide-semiconductor transistor） technology is described. An analog multiplier phase detector （PD）, a one-pole passive low pass filter and a three-stage ring oscillator with variable negativeresistance loads build up the monolithic phase-locked loop. The measured rms jitter of output signal via onwafer testing is 2. 2 ps under the stimulation of 2^31 - 1 bit-long pseudo random bit sequence （PRBS） at the bit rate of 11.6 GHz. And the tracking range is 250 MHz. The phase noise in the locked condition is measured to be - 107 dBc/Hz at 10 MHz offset, and that of the ring VCO at the central frequency is -99 dBc/Hz at 10 MHz offset. The circuit area of the proposed PLL is only 0. 47mm×0.72mm and the direct current （DC） power dissipation is 164 mW under a 1.8-V supply.展开更多
This paper presents a new first order all pass filter configurations. The proposed all pass filter configuration employs two configurations namely VDVTA and OTAs based first order all pass filter configuration. The fi...This paper presents a new first order all pass filter configurations. The proposed all pass filter configuration employs two configurations namely VDVTA and OTAs based first order all pass filter configuration. The first proposed configuration employs a single VDVTA and one grounded capacitor whereas the second proposed configuration employs two OTAs and one grounded capacitor. Both types of proposed configurations are fully electronically tunable and their quality factors do not depend on tunable pole frequency range. The reported configurations yield low active and passive sensitivities and also have low power consumption with very low supply voltage ± 0.85 V with Bias Voltage ± 0.50 V. The PSPICE simulation of the proposed VDVTA and two OTAs based first order all pass filter configurations are verified using 0.18 μm CMOS Technology Process Parameters.展开更多
A fully integrated class-E power amplifier（PA） at 2.4 GHz implemented in a 0. 18 μm 6-metal-layer mixed/RF CMOS （ complementary metal-oxide-semiconductor transistor ） technology is presented. A two-stage amplific...A fully integrated class-E power amplifier（PA） at 2.4 GHz implemented in a 0. 18 μm 6-metal-layer mixed/RF CMOS （ complementary metal-oxide-semiconductor transistor ） technology is presented. A two-stage amplification structure is chosen for this PA. The driving stage produces a high swing switch signal by using resonation technology. The output stage is designed as a class-E topology to realize the power amplification. Under a 1.2 V power supply, the PA delivers a maximum output power of 8. 8 dBm with a power-added efficiency （PAE） of 44%. A new power control method for the class-E power amplifier is described. By changing the amplitude and duty cycle of the signal which enters the class-E switch transistor, the output power can be covered from - 3 to 8. 8 dBm through a three-bit control word. The proposed PA can be used in low power applications, such as wireless sensor networks and biotelemetry systems.展开更多
This paper presents a current-mode universal biquad employing only positive type DVCCs(differential voltage current conveyors).The circuit enables LP(low-pass),BP(band-pass),HP(high-pass),BS(band-stop)and AP(all-pass)...This paper presents a current-mode universal biquad employing only positive type DVCCs(differential voltage current conveyors).The circuit enables LP(low-pass),BP(band-pass),HP(high-pass),BS(band-stop)and AP(all-pass)responses by the selection and addition of the input and output currents without any component matching constraints.Moreover the circuit parametersω0 and Q can be set orthogonally adjusting the circuit components.A design example is given together with simulation results by PSPICE.展开更多
Based on the 4-channel neural signal regeneration system which is realized by using discrete devices and successfully used for in-vivo experiments on rats and rabbits, a single channel neural signal regeneration integ...Based on the 4-channel neural signal regeneration system which is realized by using discrete devices and successfully used for in-vivo experiments on rats and rabbits, a single channel neural signal regeneration integrated circuit （IC）is designed and realized in CSMC ＇ s 0. 6 μm CMOS （ complementary metal-oxide-semiconductor transistor ） technology. The IC consists of a neural signal detection circuit with an adjustable gain, a buffer, and a function electrical stimulation （FES） circuit. The neural signal regenerating IC occupies a die area of 1.42 mm × 1.34 mm. Under a dual supply voltage of ±2. 5 V, the DC power consumption is less than 10 mW. The on-wafer measurement results are as follows： the output resistor is 118 ml）, the 3 dB bandwidth is greater than 30 kHz, and the gain can be variable from 50 to 90 dB. The circuit is used for in-vivo experiments on the rat＇ s sciatic nerve as well as on the spinal cord with the cuff type electrode array and the twin-needle electrode. The neural signal is successfully regenerated both on a rat＇ s sciatic nerve bundle and on the spinal cord.展开更多
Hybrid integration ofⅢ-Ⅴand ferroelectric materials is being broadly adopted to enhance functionalities in silicon photonic integrated circuits(PICs).Bonding and transfer printing have been the popular approaches fo...Hybrid integration ofⅢ-Ⅴand ferroelectric materials is being broadly adopted to enhance functionalities in silicon photonic integrated circuits(PICs).Bonding and transfer printing have been the popular approaches for integration of III–V gain media with silicon PICs.Similar approaches are also being considered for ferroelectrics to enable larger RF modulation bandwidths,higher linearity,lower optical loss integrated optical modulators on chip.In this paper,we review existing integration strategies ofⅢ-Ⅴmaterials and present a route towards hybrid integration of bothⅢ-Ⅴand ferroelectrics on the same chip.We show that adiabatic transformation of the optical mode between hybrid ferroelectric and silicon sections enables efficient transfer of optical modal energies for maximum overlap of the optical mode with the ferroelectric media,similar to approaches adopted to maximize optical overlap with the gain section,thereby reducing lasing thresholds for hybridⅢ-Ⅴintegration with silicon PICs.Preliminary designs are presented to enable a foundry compatible hybrid integration route of diverse functionalities on silicon PICs.展开更多
A neuronal signal detecting circuit and a neuronal signal stimulating circuit designed for a monolithic integrated MEA（micro-electrode array） system are described. As a basic cell of the circuits, an OPA（ operation...A neuronal signal detecting circuit and a neuronal signal stimulating circuit designed for a monolithic integrated MEA（micro-electrode array） system are described. As a basic cell of the circuits, an OPA（ operational amplifier） is designed with low power, low noise, small size and high gain. The detecting circuit has a chip area of 290 μm × 400 μm, a power dissipation of 2.02 mW, an equivalent input noise of 17.72 nV/ Hz, a gain of 60. 5 dB, and an output voltage from - 2. 48 to ＋ 2. 5 V. The stimulating circuit has a chip area of 130 μm × 290 μm, a power dissipation of 740 μW, and an output voltage from - 2. 5 to 2. 04 V. The parameters show that two circuits are suitable for a monolithic integrated MEA system. The detecting circuit and MEA have been fabricated. The test results show that the detecting circuit works well.展开更多
文摘An integrated 3.3V/1.2V SC DC-DC converter operating under 10MHz with a fixed duty radio of 0.5 is presented.To improve the output current of the converter,CMOS technology is adopted to fabricate the switching devices,and mutually compensatory circuitry technology is also employed to double the output current furthermore.The simulation results using Hspice simulation software,show that the output currents of a single unit circuit and two unit circuits connected in a mutually compensatory manner of the improved converter is about 12.5mA and 26mA,respectively.The power conversion efficiency of the mutually compensatory circuit can amount to 73%,while its output voltage ripple is less than 1.5%.The converter is fabricated in standard Rohm 0.35μm CMOS technology in Tokyo University of Japan.The test result indicates that the output current of 9.8mA can be obtained from a single unit circuit of the improved converter.
基金Project supported by the National High Technology Research and Development Program of China （Grant No 2003AA1Z1630） and the National Natural Science Foundation of China （Grant No 60376024）.
文摘A specially designed experiment is performed for investigating gate-induced drain leakage （GIDL） current in 90nm CMOS technology using lightly-doped drain （LDD） NMOSFET. This paper shows that the drain bias VD has a strong effect on GIDL current as compared with the gate bias VG at the same drain-gate voltage VDG. It is found that the difference between ID in the off-state ID - VG characteristics and the corresponding one in the off-state ID - VD characteristics, which is defined as IDIFF, versus VDG shows a peak. The difference between the influences of VD and VG on GIDL current is shown quantitatively by IDIFF, especially in 90nm scale. The difference is due to different hole tunnellings, Furthermore, the maximum IDIFF（IDIFF,MAX） varies linearly with VDG in logarithmic coordiuates and also VDG at IDIFF,MAX with VF which is the characteristic voltage of IDIFF, The relations are studied and some related expressions are given.
基金National Natural Science Foundation Subject(60536030,60676038)Tianjin Key Basic Research Project(06YFJZJC00200)
文摘The wedge-shaped and leaf-type silicon light-emitting devices(LED)are designed and fabricated with the Singapore Chartered Semi Inc.'s dual-gate standard 0.35μm CMOS process.The basic structure of the two devices is N well-P+ junction.P+ area is the wedge-shaped structure,which is embedded in N well.The leaf-type silicon LED device is a combination of the three wedge-shaped LED devices.The main difference between the two devices is their different electrode distribution,which is mainly in order to analyze the application of electric field confinement(EFC).The devices' micrographs were measured with the Olympus IC test microscope.The forward and reverse bias electrical characteristics of the devices were tested.Light measurements of the devices show that the electrode layout is very important when the electric field confinement is applied.
基金supported by the National Natural Science Foundation of China under Grant 62034002 and 62374026.
文摘A frequency servo system-on-chip(FS-SoC)featuring output power stabilization technology is introduced in this study for high-precision and miniaturized cesium(Cs)atomic clocks.The proposed power stabilization loop(PSL)technique,incorporating an off-chip power detector(PD),ensures that the output power of the FS-SoC remains stable,mitigating the impact of power fluctuations on the atomic clock's stability.Additionally,a one-pulse-per-second(1PPS)is employed to syn-chronize the clock with GPS.Fabricated using 65 nm CMOS technology,the measured phase noise of the FS-SoC stands at-69.5 dBc/Hz@100 Hz offset and-83.9 dBc/Hz@1 kHz offset,accompanied by a power dissipation of 19.7 mW.The Cs atomic clock employing the proposed FS-SoC and PSL obtains an Allan deviation of 1.7×10^(-11) with 1-s averaging time.
基金the National Natural Science Foundation of China (Grant Nos. 60625403, 90207004)the National Basic Research Program of China (Grant No. 2006CB302701)
文摘It is predicted that CMOS technology will probably enter into 22 nm node around 2012. Scaling of CMOS logic technology from 32 to 22 nm node meets more critical issues and needs some significant changes of the technology, as well as integration of the advanced processes. This paper will review the key processing technologies which can be potentially integrated into 22 nm and beyond technology nodes, including double patterning technology with high NA water immersion lithography and EUV lithography, new device architectures, high K/metal gate （HK/MG） stack and integration technology, mobility enhancement technologies, source/drain engineering and advanced copper interconnect technology with ultra-low-k process.
文摘The development of next 32 nm generation and below needs innovations on not only device structures, but also fabrication techniques and material selections. Among those promising technologies, new gate structures as high-κ gate dielectric and metal gate, strain channel carrier mobility enhancement technology, and novel non-planar MOSFET structures are all possible candidate technologies. In this paper, we will specify our discussion on the research progress of high-κ-metal gate and non-planar MOSFET-technologies that are suitable to 32 nm technology node and beyond.
文摘This design is presented of a 2 × 2 planar array, with a half-wave dipole antenna to be its element, on a new substrate material, Schott Borofloat, with CMOS technology in the 60 GHz band. In the proposed structure, all the designs are based on the CMOS technology and similar performance could be achieved with the same size in contrast to the design on low-temperature co-fired ceramic （LTCC）. This could lead to the improving of the compatibility with the CMOS IC process, the design cost and the design precision which is restricted in the LTCC process. The simulated-10 dB bandwidth of the array is from 58 to 64 GHz. A peak gain of 9.4 dBi is achieved. Good agreement on return loss is achieved between simulations and measurements.
基金supported by the National Natural Science Foundation of China(No.60236020)the Scientific Research Common Program of Beijing Municipal Commission of Education(No.KM201211232018)the Natural Science Foundation of Beijing City(No.4112029)
文摘A low power and low voltage∑△analog-to-digital modulator is realized with digital CMOS technology, which is due to full compensated depletion mode capacitors.Compared with mixed signal technology,this type of modulator is more compatible for pure digital applications.A pseudo-two-stage class-AB OTA is used in switchedcapacitor integrators for low voltage and low power.The modulator is realized in standard SMIC 0.18μm 1P6M digital CMOS technology.Measured results show that with 1.2 V supply voltage and a 6 MHz sample clock,the dynamic range of the modulator is 84 dB and the total power dissipation is 2460μW.
文摘Submicron CMOS IC technology, including triple layer resist lithography technology, RIE, LDD, Titanium Salicide, shallow junction, thin gate oxide, no bird's beak isolation and channel's multiple implantation doping technology have been developed. 0.50μm. CMOS integrated circuits have been fabricated using this submicron CMOS process.
文摘A monolithic 10GHz LC voltage-controlled oscillator （VCO） is implemented in standard 0.25μm CMOS technology. The VCO adopts an optimized symmetric circular inductor with center-tap, an accumulation-mode MOS （A-MOS） varactor in series with a passive metal-isolator-metal capacitor （MIM-CAP） and a tail current source with an LC filter to operate with high-frequency and low-noise resulting in - 103.2dBc/Hz at 1MHz offset from carrier frequency of 10.2GHz and approximately 11.5% tuning range. With a 3.3V supply voltage, the core circuit consumes 9.9mW. The chip area is 0.67mm × 0.58mm.
文摘A quadrature modulator and an up-conversion mixer for an 802. lla wireless LAN system are designed and fabricated in 0.18μm gate length standard CMOS technology. A current feedback loop with a transconductor is used to improve the linearity of the quadrature modulator;An LC resonant tank is used as the load of the upconversion mixer to improve its gain and increase the voltage swing. The measurement results show that the input P1dB achieves -3.6dBm, the transducer power gain of the circuit is -3.6dB,and the current consumes about 45.8mA with a 1.8V power supply.
文摘This paper presents a 155Mbps limiting amplifier for STM-1 systems of SDH optical communication. It is implemented in CSMC 0.5μm CMOS technology. Under a supply voltage of 3.3V, it has a power consumption of 198mW. The core of the circuit is composed of 6 cascaded amplifiers that are in a conventional structure of differential pairs,an output buffer, and a DC offset cancellation feedback loop. The small signal gain can be adjusted from 74 to 44dB by an off-chip resistor. The chip was packaged before being tested. The experimental results indicate that the circuit has an input dynamic range of 54dB and provides a single-ended output swing of 950mV. Its output eye diagram remains satisfactory when the pseudo-random bit sequence （PRBS） input speed reaches 400Mbps.
文摘According to the international technology roadmap for semiconductors （ITRS）,32nm technology node will be introduced around 2009. Scaling of CMOS logic devices from 45 to 32nm node has come across significant barriers. Overcoming these pitch-scaling induced barriers requires integrating the most advanced process technologies into product manufacturing. This paper reviews and discusses new technology applications that could be potentially integrated into 32nm node in the following areas：extension of immersion lithography,mobility enhancement substrate technology,metal/ high-k （MHK） gate stack, ultra-shallow junction （USJ） and other strain enhancement engineering methods, including stress proximity effect （SPT）, dual stress liner （DSL）, stress memorization technique （SMT）, high aspect ratio process （HARP） for STI and PMD,embedded SiGe （for pFET） and SiC （for nFET） source/drain （S/D） using selective epitaxial growth （SEG） method,metallization for middle of line （MOL） and back-end of line （BEOL） ,and ultra low-k （ULK） integration.
基金The National High Technology Research and Devel-opment Program of China (863Program) (No2001AA312010)
文摘A design of a ll. 6-GHz phase-locked loop （PLL） fabricated in 49-GHz 0. 18-μm CMOS （complementary metal-oxide-semiconductor transistor） technology is described. An analog multiplier phase detector （PD）, a one-pole passive low pass filter and a three-stage ring oscillator with variable negativeresistance loads build up the monolithic phase-locked loop. The measured rms jitter of output signal via onwafer testing is 2. 2 ps under the stimulation of 2^31 - 1 bit-long pseudo random bit sequence （PRBS） at the bit rate of 11.6 GHz. And the tracking range is 250 MHz. The phase noise in the locked condition is measured to be - 107 dBc/Hz at 10 MHz offset, and that of the ring VCO at the central frequency is -99 dBc/Hz at 10 MHz offset. The circuit area of the proposed PLL is only 0. 47mm×0.72mm and the direct current （DC） power dissipation is 164 mW under a 1.8-V supply.
文摘This paper presents a new first order all pass filter configurations. The proposed all pass filter configuration employs two configurations namely VDVTA and OTAs based first order all pass filter configuration. The first proposed configuration employs a single VDVTA and one grounded capacitor whereas the second proposed configuration employs two OTAs and one grounded capacitor. Both types of proposed configurations are fully electronically tunable and their quality factors do not depend on tunable pole frequency range. The reported configurations yield low active and passive sensitivities and also have low power consumption with very low supply voltage ± 0.85 V with Bias Voltage ± 0.50 V. The PSPICE simulation of the proposed VDVTA and two OTAs based first order all pass filter configurations are verified using 0.18 μm CMOS Technology Process Parameters.
基金The National High Technology Research and Development Program of China(863 Program)(No.2007AA01Z2A7)
文摘A fully integrated class-E power amplifier（PA） at 2.4 GHz implemented in a 0. 18 μm 6-metal-layer mixed/RF CMOS （ complementary metal-oxide-semiconductor transistor ） technology is presented. A two-stage amplification structure is chosen for this PA. The driving stage produces a high swing switch signal by using resonation technology. The output stage is designed as a class-E topology to realize the power amplification. Under a 1.2 V power supply, the PA delivers a maximum output power of 8. 8 dBm with a power-added efficiency （PAE） of 44%. A new power control method for the class-E power amplifier is described. By changing the amplitude and duty cycle of the signal which enters the class-E switch transistor, the output power can be covered from - 3 to 8. 8 dBm through a three-bit control word. The proposed PA can be used in low power applications, such as wireless sensor networks and biotelemetry systems.
文摘This paper presents a current-mode universal biquad employing only positive type DVCCs(differential voltage current conveyors).The circuit enables LP(low-pass),BP(band-pass),HP(high-pass),BS(band-stop)and AP(all-pass)responses by the selection and addition of the input and output currents without any component matching constraints.Moreover the circuit parametersω0 and Q can be set orthogonally adjusting the circuit components.A design example is given together with simulation results by PSPICE.
基金The National Natural Science Foundation of China(No.90307013,90707005)
文摘Based on the 4-channel neural signal regeneration system which is realized by using discrete devices and successfully used for in-vivo experiments on rats and rabbits, a single channel neural signal regeneration integrated circuit （IC）is designed and realized in CSMC ＇ s 0. 6 μm CMOS （ complementary metal-oxide-semiconductor transistor ） technology. The IC consists of a neural signal detection circuit with an adjustable gain, a buffer, and a function electrical stimulation （FES） circuit. The neural signal regenerating IC occupies a die area of 1.42 mm × 1.34 mm. Under a dual supply voltage of ±2. 5 V, the DC power consumption is less than 10 mW. The on-wafer measurement results are as follows： the output resistor is 118 ml）, the 3 dB bandwidth is greater than 30 kHz, and the gain can be variable from 50 to 90 dB. The circuit is used for in-vivo experiments on the rat＇ s sciatic nerve as well as on the spinal cord with the cuff type electrode array and the twin-needle electrode. The neural signal is successfully regenerated both on a rat＇ s sciatic nerve bundle and on the spinal cord.
文摘Hybrid integration ofⅢ-Ⅴand ferroelectric materials is being broadly adopted to enhance functionalities in silicon photonic integrated circuits(PICs).Bonding and transfer printing have been the popular approaches for integration of III–V gain media with silicon PICs.Similar approaches are also being considered for ferroelectrics to enable larger RF modulation bandwidths,higher linearity,lower optical loss integrated optical modulators on chip.In this paper,we review existing integration strategies ofⅢ-Ⅴmaterials and present a route towards hybrid integration of bothⅢ-Ⅴand ferroelectrics on the same chip.We show that adiabatic transformation of the optical mode between hybrid ferroelectric and silicon sections enables efficient transfer of optical modal energies for maximum overlap of the optical mode with the ferroelectric media,similar to approaches adopted to maximize optical overlap with the gain section,thereby reducing lasing thresholds for hybridⅢ-Ⅴintegration with silicon PICs.Preliminary designs are presented to enable a foundry compatible hybrid integration route of diverse functionalities on silicon PICs.
基金The National Natural Science Foundation of China (No.90307013,90707005)the Natural Science Foundation of Jiangsu Province(No. BK2008032)Open Foundation of State Key Laboratory of Bio-Electronics of Southeast University
文摘A neuronal signal detecting circuit and a neuronal signal stimulating circuit designed for a monolithic integrated MEA（micro-electrode array） system are described. As a basic cell of the circuits, an OPA（ operational amplifier） is designed with low power, low noise, small size and high gain. The detecting circuit has a chip area of 290 μm × 400 μm, a power dissipation of 2.02 mW, an equivalent input noise of 17.72 nV/ Hz, a gain of 60. 5 dB, and an output voltage from - 2. 48 to ＋ 2. 5 V. The stimulating circuit has a chip area of 130 μm × 290 μm, a power dissipation of 740 μW, and an output voltage from - 2. 5 to 2. 04 V. The parameters show that two circuits are suitable for a monolithic integrated MEA system. The detecting circuit and MEA have been fabricated. The test results show that the detecting circuit works well.
