期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
石灰石煅烧过程中产物CaO孔隙分布变化研究 被引量:8
1
作者 王春波 李永华 +1 位作者 危日光 陈鸿伟 《热能动力工程》 CAS CSCD 北大核心 2006年第4期370-372,共3页
首次以孔径长度分布函数为基础,结合比表面积和孔隙率等参数,建立了石灰石煅烧过程中产物CaO孔隙孔径分布模型。并结合实验结果,对CaO孔的分布特性及其受烧结影响而不断演化的过程进行了模拟研究。研究时将0~50A、50~200A、200A以... 首次以孔径长度分布函数为基础,结合比表面积和孔隙率等参数,建立了石灰石煅烧过程中产物CaO孔隙孔径分布模型。并结合实验结果,对CaO孔的分布特性及其受烧结影响而不断演化的过程进行了模拟研究。研究时将0~50A、50~200A、200A以上这3种孔径范围的孔进行了重点分段分析,计算表明3个孔径范围(0~50A、50~200A、200A以上)的孔在不同的煅烧阶段对比表面积的贡献是不断发生变化的。在此基础上提出了最佳煅烧率的概念。最佳煅烧率随着煅烧温度的提高而向后推迟。 展开更多
关键词 石灰石 cao煅烧 孔径发布 最佳煅烧
下载PDF
CaO孔结构分形特性研究 被引量:3
2
作者 王春波 陈传敏 +1 位作者 李永华 梁秀俊 《热能动力工程》 CAS CSCD 北大核心 2008年第2期187-190,共4页
以分形理论为基础,探讨了调质脱硫剂的孔结构特性。研究了添加剂含量及煅烧温度对CaO分形维数的影响。结果表明,添加剂含量增多及煅烧温度升高,均会造成CaO分形维数的下降。如在900℃下,当添加剂含量从0.7%增加到3.4%时,分形维数约下降... 以分形理论为基础,探讨了调质脱硫剂的孔结构特性。研究了添加剂含量及煅烧温度对CaO分形维数的影响。结果表明,添加剂含量增多及煅烧温度升高,均会造成CaO分形维数的下降。如在900℃下,当添加剂含量从0.7%增加到3.4%时,分形维数约下降了0.24。而在2%添加剂含量条件下,当煅烧温度从800℃升高至1000℃时,分形维数约下降了0.08。还研究了分形维数对CaO孔径分布的反映效果。分形维数下降,CaO的孔径分布向大孔径方向偏移,同时具有更大的最可几孔径,表明分形维数可非常好的用于描述CaO孔径分布特性。 展开更多
关键词 调质脱硫剂 cao煅烧 孔径分布 分形维数
下载PDF
Effect of pre-calcination for modified CaO-based sorbents on multiple carbonation/calcination cycles 被引量:2
3
作者 Xiaotong Liu Xiaoxun Ma +1 位作者 Liu He Shisen Xu 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2017年第10期1412-1421,共10页
In the present work,the effect of pre-calcination on carbonation conversion and cyclic stability of modi fied CaObased sorbent was investigated by thermogravimetric analyzer(TGA).The modi fied CaO-based sorbents with ... In the present work,the effect of pre-calcination on carbonation conversion and cyclic stability of modi fied CaObased sorbent was investigated by thermogravimetric analyzer(TGA).The modi fied CaO-based sorbents with CaAc_2 as precursor were respectively doped with different elements(Mg,Al,Ce,Zr and La).The speci fic surface area,pore volume and pore size distribution were tested by N_2 isothermal adsorption measurements.The phase compositions of sorbents were characterized by X-ray diffraction(XRD).The results showed that the cyclic stabilities of the sorbents were improved by pre-calcination.The pre-calcination was conducted at 900°C for 5 h in air by the muf fle furnace.With pre-calcination,the cyclic stabilities of sorbents could be as high as 96% after 22 cycles,such as CaO-Al,CaO-Ce and CaO-La.After contact with air,the carbonation conversions of spent sorbents with pre-calcination suddenly increased by about one-sixth due to the change of channel structure by hydration.Both the cyclic stability of sorbent and the durability of reactivation were related to the structural stability of sample,especially the stability of mesopores between 2 nm and 5.5 nm.The present work also provided an easy and low-cost method for reactivating the spent CaO-based sorbents. 展开更多
关键词 Ca O-based sorbent Cyclic stability Pre-calcination Reactivation
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部