It is of important practical significance to reduce NOx emission and CO2 emission in China's cement industry.This paper firstly identifies key factors that influence China's future cement demand,and then uses ...It is of important practical significance to reduce NOx emission and CO2 emission in China's cement industry.This paper firstly identifies key factors that influence China's future cement demand,and then uses the Gompertz model to project China's future cement demand and production.Furthermore,the multi-pollutant abatement planning model(MAP)was developed based on the TIMES model to analyze the co-benefits of CO2 and NOx control in China's cement industry.During modeling analysis,three scenarios such as basic as usual scenario(BAU),moderately low carbon scenario(MLC),and radically low carbon scenario(RLC),were built according to different policy constraints and emission control goals.Moreover,the benefits of co-controlling NOx and CO2 emission in China's cement industry have been estimated.Finally,this paper proposes a cost-efficient,green,and low carbon development roadmap for the Chinese cement sector,and puts forwards countermeasures as follows:first,different ministries should enhance communication and coordination about how to promote the co-control of NOx and CO2 in cement industry.Second,co-control technology list should be issued timely for cement industry,and the R&D investment on new technologies and demonstration projects should be increased.Third,the phase-out of old cement capacity needs to be continued at policy level.Fourth,it is important to scientifically evaluate the relevant environmental impact and adverse motivation of ammonia production by NOx removal requirement in cement industry.展开更多
Industrial transformation and green production(ITGP) is a new 10-year international research initiative proposed by the Chinese National Committee for Future Earth. It is also an important theme for adapting and respo...Industrial transformation and green production(ITGP) is a new 10-year international research initiative proposed by the Chinese National Committee for Future Earth. It is also an important theme for adapting and responding to global environmental change. Aiming at a thorough examination of the implementation of ITGP in China, this paper presents its objectives, its three major areas, and their progress so far. It also identifies the key elements of its management and proposes new perspectives on managing green transformation. For instance, we introduce a case study on cement industry that shows the positive policy effects of reducing backward production capacity on PCDD/Fs emissions. Finally,to develop different transformation scenarios for a green future, we propose four strategies: 1) policy integration for promoting green industry, 2)system innovation and a multidisciplinary approach, 3) collaborative governance with all potential stakeholders, and 4) managing uncertainty,risks, and long-time horizons.展开更多
Cement production is a highly energy-intensive process, and the rotary kiln is the most important part of the process. Having a comprehensive model of the kiln in order to reduce manufacturing costs, better performanc...Cement production is a highly energy-intensive process, and the rotary kiln is the most important part of the process. Having a comprehensive model of the kiln in order to reduce manufacturing costs, better performance can be created. In this paper, the influence processes in a simulated cement rotary kiln and operating parameters on the output of the study were to develop and validate the systems using the same batch. The followings were examined: solid phase, gas and coating temperature change in a rotary kiln.展开更多
[Objective]The study aimed at evaluating the ability to save energy and reduce CO 2 emission in China's cement industry.[Method] Based on long-term energy alternative planning system software(LEAP)," LEAP of ...[Objective]The study aimed at evaluating the ability to save energy and reduce CO 2 emission in China's cement industry.[Method] Based on long-term energy alternative planning system software(LEAP)," LEAP of China's cement industry" model was established to simulate energy conservation and emission reduction in China's cement industry from 2010 to 2040 in different technologic situations.[Result]To save energy and reduce CO 2 emissions,new dry process kiln has priority over other technologies or measures,followed by equipment enlargement,mechanical shaft kiln,power generation system based on waste heat,as well as high-efficiency and energy-saving grinding technology,and new preparation technology.If all the advanced technologies and measures are adopted,energy consumption and CO 2 emissions can be reduced by about 40.76% and 42.97% respectively.[Conclusion]LEAP of model is suitable for analyzing energy saving and emission reducing in China's cement industry and other industrial fields.展开更多
Carbon dioxide(CO_(2))emissions from the cement industry account for 26%of the total industrial emissions,and the need to develop low-carbon techniques within the cement industry is extremely urgent.Low-carbon project...Carbon dioxide(CO_(2))emissions from the cement industry account for 26%of the total industrial emissions,and the need to develop low-carbon techniques within the cement industry is extremely urgent.Low-carbon projects and technologies for the cement industry in different regions and countries have been thoroughly reviewed in this manuscript,and the low-carbon development concept for each county has been analyzed.For developing countries such as China and India,energy saving and efficiency enhancement are currently the key points,while for developed countries and regions such as Europe,more efforts have been focused on carbon capture,utilization,and storage(CCUS).Global CCUS projects have been previously conducted,and the majority of CCUS projects are currently performed in Europe where major projects such as the CEMCAP,CLEANKER,and IEILAC projects represent the latest research progress in cement production technologies and low-carbon technologies for the global cement industry.The development of low-carbon cement technologies has changed from focusing on the end point to instead focusing on the source and process through the exploration of hydrogen and solar energies,and more disruptive and original technologies are expected to be developed,particularly in the cement industry in China.展开更多
Cement production is characterized by its great capacity, long-time delay, multi variables, difficult measurement and multi disturbances. According to the distributed intelligent control strategy based on the multi (a...Cement production is characterized by its great capacity, long-time delay, multi variables, difficult measurement and multi disturbances. According to the distributed intelligent control strategy based on the multi (agent,) the multi agent control system of cement production is built, which includes integrated optimal control and diagnosis control. The distributed and multiple level structure of multi agent system for the cement control is studied. The optimal agent is in the distributed state, which aims at the partial process of the cement production, and forms the optimal layer. The diagnosis agent located on the diagnosis layer is the diagnosis unit which aims at the whole process of the cement production, and the central management unit of the system. The system cooperation is realized by the communication among optimal agents and diagnosis agent. The architecture of the optimal agent and the diagnosis agent are designed. The detailed functions of the optimal agent and the diagnosis agent are analyzed. At last the realization methods of the agents are given, and the application of the multi agent control system is presented. The multi agent system has been successfully applied to the off-line control of one cement plant with capacity of 5 000 t/d. The results show that the average yield of the clinker increases 9.3% and the coal consumption decreases 7.5 kg/t.展开更多
Hydration cracks of magnesia-spinel bricks in cement industry have been serious problems for both refractory producers and refractory users for a long time.When magnesia-spinel bricks are kept for more than 6months,th...Hydration cracks of magnesia-spinel bricks in cement industry have been serious problems for both refractory producers and refractory users for a long time.When magnesia-spinel bricks are kept for more than 6months,the bricks tend to have reaction with water or moisture and result in cracks and loss on their structural strength. Those bricks cannot be used anymore and cause substantial loss for the related parties. In 2013,the Siam Refractory Industry Co.,Ltd.,Thailand,successfully developed and applied a special nano-technology to create "Anti-Hydration Magnesia-Spinel Bricks " for cement industry which can have the storage time more than two years even in high humidity areas. The cement producers can ensure that all bricks still have good properties as the new ones.展开更多
The chrome pollution from cement industry was introduced briefly,the research on chrome free basic refractories for cement kilns was reviewed,the production technologies of magnesia calcia,magnesium aluminate spinel,m...The chrome pollution from cement industry was introduced briefly,the research on chrome free basic refractories for cement kilns was reviewed,the production technologies of magnesia calcia,magnesium aluminate spinel,magnesia hercynite refractories,etc. were specified,the principles to improve thermal shock resistance and coating adhesiveness of refractories were analyzed,the measures to extend service life by improving production equipment and service conditions of refractories were put forward,the future of chrome free refractories was expected and some developing suggestions were given.展开更多
In order to better solve the problem of electromagnetic pollution in the civil building cement,to improve the absorption capacity of magnesium oxysulfide cement based materials,and to better use sulfur oxide magnesium...In order to better solve the problem of electromagnetic pollution in the civil building cement,to improve the absorption capacity of magnesium oxysulfide cement based materials,and to better use sulfur oxide magnesium cement foamed sheet for improvement of electromagnetic industry,this paper uses the excellent microwave absorbing properties of ferrite and the modified sulfur oxide magnesium cement foam board,and discusses the microwave absorbing performance,aiming at improving the electromagnetic pollution in daily life.The effects of ferrite and silicon carbide doping on microwave absorption properties of modified magnesium oxysulfate cement were studied.At the same time,the wave absorbing properties of the corresponding samples were detected by bow method,and the causes of the corresponding phenomena were analyzed by scanning electron microscopy (SEM).The results show that the lowest reflectance of the material is-17.9 dB at 34.1 GHz and the average reflectance of the whole band is-15.9 dB under the target frequency band of 26.5-40 GHz.Under the action of external magnetic field,the absorbing particles are affected by magnetization force,magnetic dipole and resistance coupling,and play the absorbing effect in the cement base solidified completely in the electromagnetic field environment.The lowest reflectance is-17.3dB at 36.4GHz and the average reflectance is-14.3dB for the whole band.展开更多
In this paper,the durability of cement mortar prepared with a recycled-concrete fine powder(RFP)was examined;including the analysis of a variety of aspects,such as the carbonization,sulfate attack and chloride ion ero...In this paper,the durability of cement mortar prepared with a recycled-concrete fine powder(RFP)was examined;including the analysis of a variety of aspects,such as the carbonization,sulfate attack and chloride ion erosion resistance.The results indicate that the influence of RFP on these three aspects is different.The carbonization depth after 30 days and the chloride diffusion coefficient of mortar containing 10%RFP decreased by 13.3%and 28.19%.With a further increase in the RFP content,interconnected pores formed between the RFP particles,leading to an acceleration of the penetration rate of CO_(2)and Cl^(−).When the RFP content was less than 50%,the corrosion resistance coefficient of the compressive strength of the mortar was 0.84-1.05 after 90 days of sulfate attack.But the expansion and cracking of the mortar was effectively alleviated due to decrease of the gypsum production.Scanning electron microscope(SEM)analysis has confirmed that 10%RFP contributes to the formation of a dense microstructure in the cement mortar.展开更多
Understanding the mechanical properties and multiscale failure mechanism of frozen soft rock is an important prerequisite for the construction safety of tunnels,artificially frozen ground and other infrastructure in c...Understanding the mechanical properties and multiscale failure mechanism of frozen soft rock is an important prerequisite for the construction safety of tunnels,artificially frozen ground and other infrastructure in cold regions.In this study,the triaxial compression test are performed on mudstone in the weakly cemented soft rock strata in the mining area of western China,and the mechanical characteristics and failure mechanism of weakly cemented mudstone are systematically investigated under the combined action of freezing and loading.Furthermore,the quantitative relationship between the microstructural parameters and the macroscopic strength and deformation parameters is established based on fractal theory.Thus,the failure mechanism of frozen weakly cemented mudstone is revealed on both micro- and macro-scales.The results show that temperature and confining pressure significantly affects the elastic modulus and peak strength of weakly cemented mudstone.With decreasing temperature,the compressive strength increases,while the corresponding peak strain decreases gradually.On the deformation curve,the plastic deformation stage is shortened,and the brittle fracture feature at the post-peak stage is more prominent,and the elastic modulus correspondingly increases with decreasing temperature.Under low-temperature conditions,most of the weakly cemented mudstone undergoes microscopic shear failure along the main fracture surface.The micro-fracture morphology characteristics of weakly cemented mudstone under different temperatures are quantified via the fractal dimension,and an approximately exponential relationship can be obtained among the fractal dimension and the temperature,compressive strength and elastic modulus.展开更多
Introduction: Synovial cyst of the tibial tunnel in connection with anterior cruciate ligament (ACL) reconstruction is a rare but particularly troublesome complication. Medical treatment is often doomed to failure, an...Introduction: Synovial cyst of the tibial tunnel in connection with anterior cruciate ligament (ACL) reconstruction is a rare but particularly troublesome complication. Medical treatment is often doomed to failure, and surgical treatment usually consists of excising the cyst and filling the tunnel with bone. The aim of this study was to evaluate the results of filling the tunnel with acrylic cement. Hypothesis: Filling the tibial bone tunnel with acrylic cement should eliminate communication between the joint cavity and the pre-tibial surface and prevent cyst recurrence. Patients and Methods: This retrospective series is composed of 13 patients, 9 men and 4 women, mean age 48.5 years (31 to 64) operated on between 2011 and 2019 for an intra- and extraosseous synovial cyst consecutive to the tibial tunnel of an ACL graft. Between 1983 and 2016, 12 of the patients had had a bone graft without bone block fixation (DI-DT or Mac Intosh) and one patient, a bone-bone transplant (KJ). The cyst was of variable size, located on the anteromedial aspect of the proximal end of the tibia, and often painful, warranting consultation. At the time of the initial operation, 9 patients had undergone meniscectomies (6 medial, 2 lateral, 1 double). In 7 knees, there were 7 cartilage lesions in the femorotibial and/or patellofemoral compartments (one stage 1 lesion, 2 stage 2 lesions, 4 stage 3 lesions, and no stage 4 lesions). Only 2 knees had neither cartilage nor meniscus lesions. After curettage of the bone tunnel /− removal of the non-resorbed or PEEK interference screw, the tunnel was filled with acrylic cement /− reinforced with a ligament staple to prevent expulsion. All patients underwent regular follow-up consultations until recovery. Results: At a maximum follow-up of 8 years, only 1 cyst recurred, representing a 7.69% failure rate. It was reoperated with another technique, which involved filling the tibial bone tunnel with bone graft taken from a half-bank head. After recovery, the cyst healed definitively. All patients were able to return to their previous activity within 15 days of surgery. Conclusion: Filling the tibial tunnel with acrylic cement reinforced /− with a ligament staple is a reliable and rapid solution for the treatment of intra- and extra-articular synovial cysts in relation to the tibial tunnel of ACL grafts.展开更多
The effects of ultrafine WC(WC_(UF),0.5μm) or W(1μm) and C(0.3μm)(W+C)_(UF) additives on the densification,microstructure and mechanical properties of coarse-grained cemented carbides were compared systematically.O...The effects of ultrafine WC(WC_(UF),0.5μm) or W(1μm) and C(0.3μm)(W+C)_(UF) additives on the densification,microstructure and mechanical properties of coarse-grained cemented carbides were compared systematically.Overall,the cemented carbides with WC_(UF)/(W+C)_(UF) additives are almost fully densification to be higher than 99%,and the average grain size is kept above 2.8μm.The WC_(UF) additive assists grains to(truncated)trigonal prism shape by two dimensional(2D) growth,whereas the(W+C)_(UF) additive assists grains to rounded shape by three dimensional(3D) growth,lowers WC contiguity and increases face-centered-cubic Co.The hardness and bending strength of(75WC_(C)-15WC_(UF))-10Co are 86.6 HRA and 2 272 MPa,respectively,both higher than those of(75WC_(C)-15(W+C)_(UF))-10Co,which could be ascribed to the enhanced densification and unblemished grains.However,the fracture toughness of the(75WC_(C)-15(W+C)_(UF))-10Co is 23.5 MPa·m^(1/2),higher than that of the(75WC_(C)-15WC_(UF))-10Co due to the uniform WC-Co structure and flexible binder phase.展开更多
Cement density monitoring plays a vital role in evaluating the quality of cementing projects,which is of great significance to the development of oil and gas.However,the presence of inhomogeneous cement distribution a...Cement density monitoring plays a vital role in evaluating the quality of cementing projects,which is of great significance to the development of oil and gas.However,the presence of inhomogeneous cement distribution and casing eccentricity in horizontal wells often complicates the accurate evaluation of cement azimuthal density.In this regard,this paper proposes an algorithm to calculate the cement azimuthal density in horizontal wells using a multi-detector gamma-ray detection system.The spatial dynamic response functions are simulated to obtain the influence of cement density on gamma-ray counts by the perturbation theory,and the contribution of cement density in six sectors to the gamma-ray recorded by different detectors is obtained by integrating the spatial dynamic response functions.Combined with the relationship between gamma-ray counts and cement density,a multi-parameter calculation equation system is established,and the regularized Newton iteration method is employed to invert casing eccentricity and cement azimuthal density.This approach ensures the stability of the inversion process while simultaneously achieving an accuracy of 0.05 g/cm^(3) for the cement azimuthal density.This accuracy level is ten times higher compared to density accuracy calculated using calibration equations.Overall,this algorithm enhances the accuracy of cement azimuthal density evaluation,provides valuable technical support for the monitoring of cement azimuthal density in the oil and gas industry.展开更多
BACKGROUND Percutaneous kyphoplasty(PKP)is a pivotal intervention for osteoporotic fractures,pathological vertebral compression fractures,and vertebral bone tumors.Despite its efficacy,the procedure presents challenge...BACKGROUND Percutaneous kyphoplasty(PKP)is a pivotal intervention for osteoporotic fractures,pathological vertebral compression fractures,and vertebral bone tumors.Despite its efficacy,the procedure presents challenges,notably complications arising from intradural cement leakage.Timely and accurate diagnosis,coupled with emergent intervention is imperative to improve patient prognosis.This case report illuminates the intricacies and potential complications associated with PKP,emphasizing the critical need for vigilant monitoring,prompt diagnosis,and immediate intervention to mitigate adverse outcomes.CASE SUMMARY A 58-year-old male patient,experiencing a T7 osteoporosis-related pathological compression fracture,underwent PKP at a local hospital.Two weeks postprocedure,the patient developed paraplegic and dysuric symptoms,necessitating emergency decompression surgery.Gradual improvement was achieved,marked by the restoration of muscle strength,sensation,and mobility.CONCLUSION PKP Intradural cement leakage following PKP is unusual and potentially fatal.Prompt imaging examinations,urgent evaluation,and the decompression surgery are essential,which help alleviate symptoms associated with spinal damage,markedly improving the overall prognosis.展开更多
Deep metal mines are often mined using the high-level pillars with subsequent cementation backfilling(HLSCB)mining method.At the design stage,it is therefore important to have a reasonable method for determining the s...Deep metal mines are often mined using the high-level pillars with subsequent cementation backfilling(HLSCB)mining method.At the design stage,it is therefore important to have a reasonable method for determining the shear strength of the high-level pillars(i.e.cohesion and internal friction angle)when they are supported by cemented backfilling.In this study,a formula was derived for the upper limit of the confining pressure σ3max on a high-level pillar supported by cemented backfilling in a deep metal mine.A new method of estimating the shear strength of such pillars was then proposed based on the Hoek eBrown failure criterion.Our analysis indicates that the horizontal stress σhh acting on the cemented backfill pillar can be simplified by expressing it as a constant value.A reasonable and effective value for σ3max can then be determined.The value of s3max predicted using the proposed method is generally less than 3 MPa.Within this range,the shear strength of the high-level pillar is accurately calculated using the equivalent MohreCoulomb theory.The proposed method can effectively avoid the calculation of inaccurate shear strength values for the high-level pillars when the original HoekeBrown criterion is used in the presence of large confining pressures,i.e.the situation in which the cohesion value is too large and the friction angle is too small can effectively be avoided.The proposed method is applied to a deep metal mine in China that is being excavated using the HLSCB method.The shear strength parameters of the high-level pillars obtained using the proposed method were input in the numerical simulations.The numerical results show that the recommended level heights and sizes of the high-level pillars and rooms in the mine are rational.展开更多
In recent years,China’s information technology sector has witnessed rapid growth.The development landscape of cloud security,storage,servers,and data centers,all linked to the cloud computing industry,has seen contin...In recent years,China’s information technology sector has witnessed rapid growth.The development landscape of cloud security,storage,servers,and data centers,all linked to the cloud computing industry,has seen continuous expansion.The significance of cloud computing standardization in driving the development of the digital economy industry has grown notably.This article aims to present the fundamental concepts of cloud computing,provide an overview of its application in fostering the digital economy industry,analyze the current status and principal challenges in cloud computing standardization research,explore strategies for leveraging cloud computing standardization to empower the digital economy industry and offer a range of application scenarios.The goal is to summarize experiences and offer valuable reference material for relevant stakeholders.展开更多
Rapidly expanding studies investigate the effects of e-commerce on company operations in the retail market.However,the interaction between agri-food e-commerce(AEC)and the traditional agri-food wholesale industry(AWI)...Rapidly expanding studies investigate the effects of e-commerce on company operations in the retail market.However,the interaction between agri-food e-commerce(AEC)and the traditional agri-food wholesale industry(AWI)has not received enough attention in the existing literature.Based on the provincial panel data from 2013 to 2020 in China,this paper examines the effect of AEC on AWI,comprising three dimensions:digitalization(DIGITAL),agrifood e-commerce infrastructure and supporting services(AECI),and agri-food e-commerce economy(AECE).First,AWI and AEC are measured using an entropy-based combination of indicators.The results indicate that for China as a whole,AWI has remained practically unchanged,whereas AEC exhibits a significant rising trend.Second,the findings of the fixed-effect regression reveal that DIGITAL and AECE tend to raise AWI,whereas AECI negatively affects AWI.Third,threshold regression results indicate that AECI tends to diminish AWI with three-stage inhibitory intensity,which manifests as a first increase and then a drop in the inhibition degree.These results suggest that with the introduction of e-commerce for agricultural product circulation,digital development will have catfish effects that tend to stimulate the vitality of the conventional wholesale industry and promote technical progress.Furthermore,the traditional wholesale industry benefits financially from e-commerce even while it diverts part of the traditional wholesale circulation for agricultural products.展开更多
文摘It is of important practical significance to reduce NOx emission and CO2 emission in China's cement industry.This paper firstly identifies key factors that influence China's future cement demand,and then uses the Gompertz model to project China's future cement demand and production.Furthermore,the multi-pollutant abatement planning model(MAP)was developed based on the TIMES model to analyze the co-benefits of CO2 and NOx control in China's cement industry.During modeling analysis,three scenarios such as basic as usual scenario(BAU),moderately low carbon scenario(MLC),and radically low carbon scenario(RLC),were built according to different policy constraints and emission control goals.Moreover,the benefits of co-controlling NOx and CO2 emission in China's cement industry have been estimated.Finally,this paper proposes a cost-efficient,green,and low carbon development roadmap for the Chinese cement sector,and puts forwards countermeasures as follows:first,different ministries should enhance communication and coordination about how to promote the co-control of NOx and CO2 in cement industry.Second,co-control technology list should be issued timely for cement industry,and the R&D investment on new technologies and demonstration projects should be increased.Third,the phase-out of old cement capacity needs to be continued at policy level.Fourth,it is important to scientifically evaluate the relevant environmental impact and adverse motivation of ammonia production by NOx removal requirement in cement industry.
基金funded by the Chinese Academy of Sciences (KZZD-EW-TZ-12)National Natural Science Foundation of China (414201040045 and 41371488)Natural Science Foundation of Hainan Province (413129)
文摘Industrial transformation and green production(ITGP) is a new 10-year international research initiative proposed by the Chinese National Committee for Future Earth. It is also an important theme for adapting and responding to global environmental change. Aiming at a thorough examination of the implementation of ITGP in China, this paper presents its objectives, its three major areas, and their progress so far. It also identifies the key elements of its management and proposes new perspectives on managing green transformation. For instance, we introduce a case study on cement industry that shows the positive policy effects of reducing backward production capacity on PCDD/Fs emissions. Finally,to develop different transformation scenarios for a green future, we propose four strategies: 1) policy integration for promoting green industry, 2)system innovation and a multidisciplinary approach, 3) collaborative governance with all potential stakeholders, and 4) managing uncertainty,risks, and long-time horizons.
文摘Cement production is a highly energy-intensive process, and the rotary kiln is the most important part of the process. Having a comprehensive model of the kiln in order to reduce manufacturing costs, better performance can be created. In this paper, the influence processes in a simulated cement rotary kiln and operating parameters on the output of the study were to develop and validate the systems using the same batch. The followings were examined: solid phase, gas and coating temperature change in a rotary kiln.
基金Supported by Special Project for Developing National Major Scientific Instruments and Equipments (2011YQ060111)Scientific Research Project of Environmental Protection in Commonweal Industry(201009032)
文摘[Objective]The study aimed at evaluating the ability to save energy and reduce CO 2 emission in China's cement industry.[Method] Based on long-term energy alternative planning system software(LEAP)," LEAP of China's cement industry" model was established to simulate energy conservation and emission reduction in China's cement industry from 2010 to 2040 in different technologic situations.[Result]To save energy and reduce CO 2 emissions,new dry process kiln has priority over other technologies or measures,followed by equipment enlargement,mechanical shaft kiln,power generation system based on waste heat,as well as high-efficiency and energy-saving grinding technology,and new preparation technology.If all the advanced technologies and measures are adopted,energy consumption and CO 2 emissions can be reduced by about 40.76% and 42.97% respectively.[Conclusion]LEAP of model is suitable for analyzing energy saving and emission reducing in China's cement industry and other industrial fields.
基金supported by the National Natural Science Foundation of China (No.52170119)the Youth Innovation Promotion Association of the Chinese Academy of Sciences (No.2021044)。
文摘Carbon dioxide(CO_(2))emissions from the cement industry account for 26%of the total industrial emissions,and the need to develop low-carbon techniques within the cement industry is extremely urgent.Low-carbon projects and technologies for the cement industry in different regions and countries have been thoroughly reviewed in this manuscript,and the low-carbon development concept for each county has been analyzed.For developing countries such as China and India,energy saving and efficiency enhancement are currently the key points,while for developed countries and regions such as Europe,more efforts have been focused on carbon capture,utilization,and storage(CCUS).Global CCUS projects have been previously conducted,and the majority of CCUS projects are currently performed in Europe where major projects such as the CEMCAP,CLEANKER,and IEILAC projects represent the latest research progress in cement production technologies and low-carbon technologies for the global cement industry.The development of low-carbon cement technologies has changed from focusing on the end point to instead focusing on the source and process through the exploration of hydrogen and solar energies,and more disruptive and original technologies are expected to be developed,particularly in the cement industry in China.
文摘Cement production is characterized by its great capacity, long-time delay, multi variables, difficult measurement and multi disturbances. According to the distributed intelligent control strategy based on the multi (agent,) the multi agent control system of cement production is built, which includes integrated optimal control and diagnosis control. The distributed and multiple level structure of multi agent system for the cement control is studied. The optimal agent is in the distributed state, which aims at the partial process of the cement production, and forms the optimal layer. The diagnosis agent located on the diagnosis layer is the diagnosis unit which aims at the whole process of the cement production, and the central management unit of the system. The system cooperation is realized by the communication among optimal agents and diagnosis agent. The architecture of the optimal agent and the diagnosis agent are designed. The detailed functions of the optimal agent and the diagnosis agent are analyzed. At last the realization methods of the agents are given, and the application of the multi agent control system is presented. The multi agent system has been successfully applied to the off-line control of one cement plant with capacity of 5 000 t/d. The results show that the average yield of the clinker increases 9.3% and the coal consumption decreases 7.5 kg/t.
文摘Hydration cracks of magnesia-spinel bricks in cement industry have been serious problems for both refractory producers and refractory users for a long time.When magnesia-spinel bricks are kept for more than 6months,the bricks tend to have reaction with water or moisture and result in cracks and loss on their structural strength. Those bricks cannot be used anymore and cause substantial loss for the related parties. In 2013,the Siam Refractory Industry Co.,Ltd.,Thailand,successfully developed and applied a special nano-technology to create "Anti-Hydration Magnesia-Spinel Bricks " for cement industry which can have the storage time more than two years even in high humidity areas. The cement producers can ensure that all bricks still have good properties as the new ones.
基金funded by National 973 High Tech Project"Lowpower Preparation and High Efficient Applications of Cement " ( 2009CB623100 )the National 12th Five Years Scientific and Technological Projects "High Resistance to Corrosion Cast Aluminum Series Refractories Research" ( 2013BAE03B01 - 01B )
文摘The chrome pollution from cement industry was introduced briefly,the research on chrome free basic refractories for cement kilns was reviewed,the production technologies of magnesia calcia,magnesium aluminate spinel,magnesia hercynite refractories,etc. were specified,the principles to improve thermal shock resistance and coating adhesiveness of refractories were analyzed,the measures to extend service life by improving production equipment and service conditions of refractories were put forward,the future of chrome free refractories was expected and some developing suggestions were given.
基金Funded by National Defense Basic Research Program Project。
文摘In order to better solve the problem of electromagnetic pollution in the civil building cement,to improve the absorption capacity of magnesium oxysulfide cement based materials,and to better use sulfur oxide magnesium cement foamed sheet for improvement of electromagnetic industry,this paper uses the excellent microwave absorbing properties of ferrite and the modified sulfur oxide magnesium cement foam board,and discusses the microwave absorbing performance,aiming at improving the electromagnetic pollution in daily life.The effects of ferrite and silicon carbide doping on microwave absorption properties of modified magnesium oxysulfate cement were studied.At the same time,the wave absorbing properties of the corresponding samples were detected by bow method,and the causes of the corresponding phenomena were analyzed by scanning electron microscopy (SEM).The results show that the lowest reflectance of the material is-17.9 dB at 34.1 GHz and the average reflectance of the whole band is-15.9 dB under the target frequency band of 26.5-40 GHz.Under the action of external magnetic field,the absorbing particles are affected by magnetization force,magnetic dipole and resistance coupling,and play the absorbing effect in the cement base solidified completely in the electromagnetic field environment.The lowest reflectance is-17.3dB at 36.4GHz and the average reflectance is-14.3dB for the whole band.
基金This work is supported by the Zhuhai Science and Technology Project(ZH22036203200015PWC)the Open Foundation of State Key Laboratory of Subtropical Building Science(2022ZB20).
文摘In this paper,the durability of cement mortar prepared with a recycled-concrete fine powder(RFP)was examined;including the analysis of a variety of aspects,such as the carbonization,sulfate attack and chloride ion erosion resistance.The results indicate that the influence of RFP on these three aspects is different.The carbonization depth after 30 days and the chloride diffusion coefficient of mortar containing 10%RFP decreased by 13.3%and 28.19%.With a further increase in the RFP content,interconnected pores formed between the RFP particles,leading to an acceleration of the penetration rate of CO_(2)and Cl^(−).When the RFP content was less than 50%,the corrosion resistance coefficient of the compressive strength of the mortar was 0.84-1.05 after 90 days of sulfate attack.But the expansion and cracking of the mortar was effectively alleviated due to decrease of the gypsum production.Scanning electron microscope(SEM)analysis has confirmed that 10%RFP contributes to the formation of a dense microstructure in the cement mortar.
基金funding support from Natural Science Foundation of Shandong Province(Grant No.ZR2021QE187).
文摘Understanding the mechanical properties and multiscale failure mechanism of frozen soft rock is an important prerequisite for the construction safety of tunnels,artificially frozen ground and other infrastructure in cold regions.In this study,the triaxial compression test are performed on mudstone in the weakly cemented soft rock strata in the mining area of western China,and the mechanical characteristics and failure mechanism of weakly cemented mudstone are systematically investigated under the combined action of freezing and loading.Furthermore,the quantitative relationship between the microstructural parameters and the macroscopic strength and deformation parameters is established based on fractal theory.Thus,the failure mechanism of frozen weakly cemented mudstone is revealed on both micro- and macro-scales.The results show that temperature and confining pressure significantly affects the elastic modulus and peak strength of weakly cemented mudstone.With decreasing temperature,the compressive strength increases,while the corresponding peak strain decreases gradually.On the deformation curve,the plastic deformation stage is shortened,and the brittle fracture feature at the post-peak stage is more prominent,and the elastic modulus correspondingly increases with decreasing temperature.Under low-temperature conditions,most of the weakly cemented mudstone undergoes microscopic shear failure along the main fracture surface.The micro-fracture morphology characteristics of weakly cemented mudstone under different temperatures are quantified via the fractal dimension,and an approximately exponential relationship can be obtained among the fractal dimension and the temperature,compressive strength and elastic modulus.
文摘Introduction: Synovial cyst of the tibial tunnel in connection with anterior cruciate ligament (ACL) reconstruction is a rare but particularly troublesome complication. Medical treatment is often doomed to failure, and surgical treatment usually consists of excising the cyst and filling the tunnel with bone. The aim of this study was to evaluate the results of filling the tunnel with acrylic cement. Hypothesis: Filling the tibial bone tunnel with acrylic cement should eliminate communication between the joint cavity and the pre-tibial surface and prevent cyst recurrence. Patients and Methods: This retrospective series is composed of 13 patients, 9 men and 4 women, mean age 48.5 years (31 to 64) operated on between 2011 and 2019 for an intra- and extraosseous synovial cyst consecutive to the tibial tunnel of an ACL graft. Between 1983 and 2016, 12 of the patients had had a bone graft without bone block fixation (DI-DT or Mac Intosh) and one patient, a bone-bone transplant (KJ). The cyst was of variable size, located on the anteromedial aspect of the proximal end of the tibia, and often painful, warranting consultation. At the time of the initial operation, 9 patients had undergone meniscectomies (6 medial, 2 lateral, 1 double). In 7 knees, there were 7 cartilage lesions in the femorotibial and/or patellofemoral compartments (one stage 1 lesion, 2 stage 2 lesions, 4 stage 3 lesions, and no stage 4 lesions). Only 2 knees had neither cartilage nor meniscus lesions. After curettage of the bone tunnel /− removal of the non-resorbed or PEEK interference screw, the tunnel was filled with acrylic cement /− reinforced with a ligament staple to prevent expulsion. All patients underwent regular follow-up consultations until recovery. Results: At a maximum follow-up of 8 years, only 1 cyst recurred, representing a 7.69% failure rate. It was reoperated with another technique, which involved filling the tibial bone tunnel with bone graft taken from a half-bank head. After recovery, the cyst healed definitively. All patients were able to return to their previous activity within 15 days of surgery. Conclusion: Filling the tibial tunnel with acrylic cement reinforced /− with a ligament staple is a reliable and rapid solution for the treatment of intra- and extra-articular synovial cysts in relation to the tibial tunnel of ACL grafts.
基金Funded by the Technology Innovation Leading Program of Shaanxi(No.2022QFY08-02)。
文摘The effects of ultrafine WC(WC_(UF),0.5μm) or W(1μm) and C(0.3μm)(W+C)_(UF) additives on the densification,microstructure and mechanical properties of coarse-grained cemented carbides were compared systematically.Overall,the cemented carbides with WC_(UF)/(W+C)_(UF) additives are almost fully densification to be higher than 99%,and the average grain size is kept above 2.8μm.The WC_(UF) additive assists grains to(truncated)trigonal prism shape by two dimensional(2D) growth,whereas the(W+C)_(UF) additive assists grains to rounded shape by three dimensional(3D) growth,lowers WC contiguity and increases face-centered-cubic Co.The hardness and bending strength of(75WC_(C)-15WC_(UF))-10Co are 86.6 HRA and 2 272 MPa,respectively,both higher than those of(75WC_(C)-15(W+C)_(UF))-10Co,which could be ascribed to the enhanced densification and unblemished grains.However,the fracture toughness of the(75WC_(C)-15(W+C)_(UF))-10Co is 23.5 MPa·m^(1/2),higher than that of the(75WC_(C)-15WC_(UF))-10Co due to the uniform WC-Co structure and flexible binder phase.
基金The authors would like to acknowledge the support of the National Natural Science Foundation of China(41974127,42174147).References。
文摘Cement density monitoring plays a vital role in evaluating the quality of cementing projects,which is of great significance to the development of oil and gas.However,the presence of inhomogeneous cement distribution and casing eccentricity in horizontal wells often complicates the accurate evaluation of cement azimuthal density.In this regard,this paper proposes an algorithm to calculate the cement azimuthal density in horizontal wells using a multi-detector gamma-ray detection system.The spatial dynamic response functions are simulated to obtain the influence of cement density on gamma-ray counts by the perturbation theory,and the contribution of cement density in six sectors to the gamma-ray recorded by different detectors is obtained by integrating the spatial dynamic response functions.Combined with the relationship between gamma-ray counts and cement density,a multi-parameter calculation equation system is established,and the regularized Newton iteration method is employed to invert casing eccentricity and cement azimuthal density.This approach ensures the stability of the inversion process while simultaneously achieving an accuracy of 0.05 g/cm^(3) for the cement azimuthal density.This accuracy level is ten times higher compared to density accuracy calculated using calibration equations.Overall,this algorithm enhances the accuracy of cement azimuthal density evaluation,provides valuable technical support for the monitoring of cement azimuthal density in the oil and gas industry.
文摘BACKGROUND Percutaneous kyphoplasty(PKP)is a pivotal intervention for osteoporotic fractures,pathological vertebral compression fractures,and vertebral bone tumors.Despite its efficacy,the procedure presents challenges,notably complications arising from intradural cement leakage.Timely and accurate diagnosis,coupled with emergent intervention is imperative to improve patient prognosis.This case report illuminates the intricacies and potential complications associated with PKP,emphasizing the critical need for vigilant monitoring,prompt diagnosis,and immediate intervention to mitigate adverse outcomes.CASE SUMMARY A 58-year-old male patient,experiencing a T7 osteoporosis-related pathological compression fracture,underwent PKP at a local hospital.Two weeks postprocedure,the patient developed paraplegic and dysuric symptoms,necessitating emergency decompression surgery.Gradual improvement was achieved,marked by the restoration of muscle strength,sensation,and mobility.CONCLUSION PKP Intradural cement leakage following PKP is unusual and potentially fatal.Prompt imaging examinations,urgent evaluation,and the decompression surgery are essential,which help alleviate symptoms associated with spinal damage,markedly improving the overall prognosis.
基金Financial support for this work was provided by the General Program and Youth Fund Program of the National Natural Science Foundation of China(Grant Nos.42377175 and 42002292).
文摘Deep metal mines are often mined using the high-level pillars with subsequent cementation backfilling(HLSCB)mining method.At the design stage,it is therefore important to have a reasonable method for determining the shear strength of the high-level pillars(i.e.cohesion and internal friction angle)when they are supported by cemented backfilling.In this study,a formula was derived for the upper limit of the confining pressure σ3max on a high-level pillar supported by cemented backfilling in a deep metal mine.A new method of estimating the shear strength of such pillars was then proposed based on the Hoek eBrown failure criterion.Our analysis indicates that the horizontal stress σhh acting on the cemented backfill pillar can be simplified by expressing it as a constant value.A reasonable and effective value for σ3max can then be determined.The value of s3max predicted using the proposed method is generally less than 3 MPa.Within this range,the shear strength of the high-level pillar is accurately calculated using the equivalent MohreCoulomb theory.The proposed method can effectively avoid the calculation of inaccurate shear strength values for the high-level pillars when the original HoekeBrown criterion is used in the presence of large confining pressures,i.e.the situation in which the cohesion value is too large and the friction angle is too small can effectively be avoided.The proposed method is applied to a deep metal mine in China that is being excavated using the HLSCB method.The shear strength parameters of the high-level pillars obtained using the proposed method were input in the numerical simulations.The numerical results show that the recommended level heights and sizes of the high-level pillars and rooms in the mine are rational.
文摘In recent years,China’s information technology sector has witnessed rapid growth.The development landscape of cloud security,storage,servers,and data centers,all linked to the cloud computing industry,has seen continuous expansion.The significance of cloud computing standardization in driving the development of the digital economy industry has grown notably.This article aims to present the fundamental concepts of cloud computing,provide an overview of its application in fostering the digital economy industry,analyze the current status and principal challenges in cloud computing standardization research,explore strategies for leveraging cloud computing standardization to empower the digital economy industry and offer a range of application scenarios.The goal is to summarize experiences and offer valuable reference material for relevant stakeholders.
基金supported by the Leading Talent Support Program for Agricultural Talents of the Chinese Academy of Agricultural Sciences(TCS2022020)the General program of National Natural Science Foundation of China(1573263)。
文摘Rapidly expanding studies investigate the effects of e-commerce on company operations in the retail market.However,the interaction between agri-food e-commerce(AEC)and the traditional agri-food wholesale industry(AWI)has not received enough attention in the existing literature.Based on the provincial panel data from 2013 to 2020 in China,this paper examines the effect of AEC on AWI,comprising three dimensions:digitalization(DIGITAL),agrifood e-commerce infrastructure and supporting services(AECI),and agri-food e-commerce economy(AECE).First,AWI and AEC are measured using an entropy-based combination of indicators.The results indicate that for China as a whole,AWI has remained practically unchanged,whereas AEC exhibits a significant rising trend.Second,the findings of the fixed-effect regression reveal that DIGITAL and AECE tend to raise AWI,whereas AECI negatively affects AWI.Third,threshold regression results indicate that AECI tends to diminish AWI with three-stage inhibitory intensity,which manifests as a first increase and then a drop in the inhibition degree.These results suggest that with the introduction of e-commerce for agricultural product circulation,digital development will have catfish effects that tend to stimulate the vitality of the conventional wholesale industry and promote technical progress.Furthermore,the traditional wholesale industry benefits financially from e-commerce even while it diverts part of the traditional wholesale circulation for agricultural products.