[Objectives] The research aimed to optimize extraction process of Clerodendrum philippinum Schauer var. simplex Mlodenke total flavonoids( CPTF),and provide reference for its development and utilization. [Methods] Bas...[Objectives] The research aimed to optimize extraction process of Clerodendrum philippinum Schauer var. simplex Mlodenke total flavonoids( CPTF),and provide reference for its development and utilization. [Methods] Based on single-factor test,ethanol concentration,extraction temperature and extraction time were taken as independent variables,and total flavonoids yield was taken as dependent variable. The test was conducted according to central composite design principle. Multivariate linear regression and binomial equation fitting of the result were conducted,and extraction process of CPTF was optimized by using response surface methodology. [Results]The optimal extraction process of CPTF was as below: ethanol concentration 54. 76%,extraction temperature 83. 92℃,extraction time 102. 64 min,solid-liquid ratio 1:20,extraction for twice. [Conclusions] The extraction process of CPTF by central composite design-response surface methodology was simple and feasible,with reliable prediction result,which was suitable for industrial production.展开更多
[Objectives]To optimize extraction process of total flavonoids from Akebia trifoliata( Thunb.) Koidz.,so as to provide references for development and use of Akebia trifoliata( Thunb.) Koidz. [Methods]The extraction ra...[Objectives]To optimize extraction process of total flavonoids from Akebia trifoliata( Thunb.) Koidz.,so as to provide references for development and use of Akebia trifoliata( Thunb.) Koidz. [Methods]The extraction rate of total flavonoids of Akebia trifoliata( Thunb.)Koidz. was taken as observation indicator. On the basis of single factor experiment,central composite design( CCD) was used to evaluate the effects of the extraction temperature,extraction time,and ethanol concentration on the extraction process. Multiple linear regression and binomial fitting were used,and response surface methodology( RSM) was used to select the optimum extraction process. [Results] The optimum extraction process conditions for total flavonoids of Akebia trifoliata( Thunb.) Koidz. was extraction temperature: 83. 92 ℃; extraction time:96. 47 min; ethanol concentration: 63. 92%; extraction times: two times; solid to liquid ratio: 1 ∶ 20; extraction rate of total flavonoids:4. 55%. [Conclusions] The central composite design-response surface methodology( CCD-RSM) is simple,convenient,and feasible for extraction of total flavonoids from Akebia trifoliata( Thunb.) Koidz.,and the prediction results are reliable.展开更多
Response surface methodology (RSM) using the central composite design (CCD) was applied to examine the impact of soda-anthraquinone pulping conditions on Grevillea robusta fall leaves. The pulping factors studied were...Response surface methodology (RSM) using the central composite design (CCD) was applied to examine the impact of soda-anthraquinone pulping conditions on Grevillea robusta fall leaves. The pulping factors studied were: NaOH charge 5% to 20% w/v, pulping time 30 to 180 minutes, and the anthraquinone charge 0.1 to 0.5% w/w based on the oven-dried leaves. The responses evaluated were the pulp yield, cellulose content, and the degree of delignification. Various regression models were used to evaluate the effects of varying the pulping conditions. The optimum conditions attained were;NaOH charge of 14.63%, 0.1% anthraquinone, and a pulping period of 154 minutes, corresponding to 20.68% pulp yield, 80.56% cellulose content, and 70.34% lignin removal. Analysis of variance (ANOVA), was used to determine the most important variables that improve the extraction process of cellulose. The experiment outcomes matched those predicted by the model (Predicted R2 = 0.9980, Adjusted R2 = 0.9994), demonstrating the adequacy of the model used. FTIR analysis confirmed the elimination of the non-cellulosic fiber constituents. The lignin and hemicellulose-related bands (around 1514 cm−1, 1604 cm−1, 1239 cm−1, and 1734 cm−1) decreased with chemical treatment, indicating effective cellulose extraction by the soda-anthraquinone method. Similar results were obtained by XRD, SEM and thermogravimetric analysis of the extracted cellulose. Therefore, Grevillea robusta fall leaves are suitable renewable, cost-effective, and environmentally friendly non-wood biomass for cellulose extraction.展开更多
This study discussed the application of response surface methodology(RSM)and central composite rotatable design(CCRD)for modeling and optimization of the influence of some operating variables on the performance of a l...This study discussed the application of response surface methodology(RSM)and central composite rotatable design(CCRD)for modeling and optimization of the influence of some operating variables on the performance of a lab scale thickener for dewatering of tailing in the flotation circuit.Four thickener operating variables,namely feed flowrate,solid percent,flocculant dosage and feedwell height were changed during the tests based on CCRD.The ranges of values of the thickener variables used in the design were a feed flowrate of 9–21 L/min,solid percent of 8%–20%,flocculant dosage of 1.25–4.25 g/t and feedwell height of 16–26 cm.A total of 30 thickening tests were conducted using lab scale thickener on flotation tailing obtained from the Sarcheshmeh copper mine,Iran.The underflow solid percent and bed height were expressed as functions of four operating parameters of thickener.Predicted values were found to be in good agreement with experimental values(R2values of 0.992 and 0.997 for underflow solid percent and bed height,respectively).This study has shown that the RSM and CCRD could effciently be applied for the modeling of thickener for dewatering of flotation tailing.展开更多
Objective: To study the optimal medium composition for xylanase production by Aspergillus niger XY-1 in solid-state fermentation (SSF). Methods: Statistical methodology including the Plackett-Burman design (PBD) and t...Objective: To study the optimal medium composition for xylanase production by Aspergillus niger XY-1 in solid-state fermentation (SSF). Methods: Statistical methodology including the Plackett-Burman design (PBD) and the central composite design (CCD) was employed to investigate the individual crucial component of the medium that significantly affected the enzyme yield. Results: Firstly, NaNO3, yeast extract, urea, Na2CO3, MgSO4, peptone and (NH4)2SO4 were screened as the significant factors positively affecting the xylanase production by PBD. Secondly, by valuating the nitrogen sources effect, urea was proved to be the most effective and economic nitrogen source for xylanase production and used for further optimization. Finally, the CCD and response surface methodology (RSM) were applied to determine the optimal concentration of each sig-nificant variable, which included urea, Na2CO3 and MgSO4. Subsequently a second-order polynomial was determined by multiple regression analysis. The optimum values of the critical components for maximum xylanase production were obtained as follows: x1 (urea)=0.163 (41.63 g/L), x2 (Na2CO3)=?1.68 (2.64 g/L), x3 (MgSO4)=1.338 (10.68 g/L) and the predicted xylanase value was 14374.6 U/g dry substrate. Using the optimized condition, xylanase production by Aspergillus niger XY-1 after 48 h fermentation reached 14637 U/g dry substrate with wheat bran in the shake flask. Conclusion: By using PBD and CCD, we obtained the optimal composition for xylanase production by Aspergillus niger XY-1 in SSF, and the results of no additional expensive medium and shortened fermentation time for higher xylanase production show the potential for industrial utilization.展开更多
The interaction between sucrose, yeast extract and initial pH was investigated to optimize critical medium components for mycelium biomass and production of exopolysaccharide (EPS) of Lentinus squarrosulus using Respo...The interaction between sucrose, yeast extract and initial pH was investigated to optimize critical medium components for mycelium biomass and production of exopolysaccharide (EPS) of Lentinus squarrosulus using Response Surface Methodology (RSM). A central composite design (CCD) was applied and a polynomial regression model with quadratic term was used to analyse the experimental data using analysis of variance (ANOVA). ANOVA analysis showed that the model was very significant (p Lentinus squarrosulus are as follows: sucrose concentration 114.61 g/L, yeast extract 1.62 g/L and initial pH of 5.81;sucrose concentration 115.8 g/L, yeast extract of 3.39 g/L and initial pH of 6.44 respectively.展开更多
Objective: The Response Surface Methodology (RSM) is a commonly used system to optimize cell viability of probiotic strains when they are subjected to different preservation and storage processes. Methods and Results:...Objective: The Response Surface Methodology (RSM) is a commonly used system to optimize cell viability of probiotic strains when they are subjected to different preservation and storage processes. Methods and Results: To determine the optimal levels of incorporation of several cry oprotectants (skim milk, sucrose and trehalose) in the freeze-drying process of Lactobacillus plantarum, a range of experiments based on a Rotational Central Composite design (CCD) were conducted. The results were adjusted to a quadratic model, resulting in the presence of interaction between the different variables. Solving a regression equation, we obtained the optimum concentrations of cryoprotective agents: 24.06% milk powder, 6.22% sucrose, 5.63% trehalose. To visualize the interactions between the three variables involved in the study, Design Expert? software was used. Conclusions: The analysis reveals that while trehalose has a direct effect on the viability of L. plantarum, skim milk and sucrose exert quadratic effects. There are also interactions between cryoprotectants, which emphasize the synergies produced between milk and sucrose and between sucrose and trehalose, which allows maintaining the viability of L. plantarum. Significance and Impact of the Study: The addition of new oligosaccharides as trehalose in premixtures for functional feed can maintain the viability of L. plantarum during longer periods of time, ensuring the proper administration of probiotics to their destinations.展开更多
The decolorization of reactive blue 19(RB-19)as a model dye from aqueous solutions has been studied by means of the dielectric barrier discharge(DBD)process.The independent parameters of input power,initial dye concen...The decolorization of reactive blue 19(RB-19)as a model dye from aqueous solutions has been studied by means of the dielectric barrier discharge(DBD)process.The independent parameters of input power,initial dye concentration and initial pH value were evaluated respectively.Experimental data were optimized by means of a 33 factorial design and response surface methodology(RSM).The dye was quickly removed during the treatment,yielding 96.9%of decolorization efficiency under optimized conditions.Therefore,the total organic carbon(TOC)and chemical oxygen demand(CODcr)results indicated that only the chromophore was destroyed rather than completed oxidation.This was confirmed with UV-vis and tertiary butanol assessments during the DBD treatment.展开更多
This work investigates coag-flocculation optimization treatment of alum-brewery effluent system via response surface methodology (RSM). To minimize suspended and dissolved particles (SDP), experiments were carried out...This work investigates coag-flocculation optimization treatment of alum-brewery effluent system via response surface methodology (RSM). To minimize suspended and dissolved particles (SDP), experiments were carried out using nephelometric jar test and 23-factorial design with three star-points, six-center-points and two replications. A central composite design, which is the standard design of RSM, was used to evaluate the effects and interactions of three major factors (coagulation pH, coagulant dosage, settling time) on the treatment efficiency. Multivariable quadratic model developed for the response studied indicates the optimum conditions to be 9, 500mg/l and 20minutes for coagulation pH, coagulant dosage and settling time, respectively. At optimum, the SDP was reduced from 10831.490mg/l to 801.451mg/l, representing 92.601% removal efficiency. RSM has demonstrated to be appropriate approach for the optimization of the coag-flocculation process by statistical evaluation.展开更多
Response surface methodology (RSM) based on desirability function approach (DFA) is applied to obtain an optimal design of the impeller geometry for an automotive torque converter. <span style="font-family:Ver...Response surface methodology (RSM) based on desirability function approach (DFA) is applied to obtain an optimal design of the impeller geometry for an automotive torque converter. <span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">The relative importance of six design parameters including impeller blade number, blade thickness, bias angle, scroll angle, inlet angle and exit angle is investigated using orthogonal design approach. </span></span></span></span><span><span><span style="font-family:""><span style="font-family:Verdana;">The impeller inlet angle, exit angle and bias angle </span><span style="font-family:Verdana;">are found to exert the greatest influence on the overall performance of a torque converter, with two flow area factors being considered, namely 17% and 20%. Then, RSM together with central composite design (CCD) method is used to in-depth evaluate the interaction effect of the three key parameters on converter performance. The results demonstrate that </span><span style="font-family:Verdana;">impeller exit angle has the strongest impact on peak efficiency</span><span style="font-family:Verdana;">, with larger angles yielding the most favorable results. The stall torque ratio maximization is attainable with the increase of impeller bias angle and inlet angle together with smaller exit angle. In the end, </span><span style="font-family:Verdana;">an optimized design for the impeller geometry is obtained with stall torque ratio and peak efficiency increased by 1.62% and 1.1%, respectively.</span><span style="font-family:Verdana;"> The new optimization method can be used as a reference for performance enhancement in the design process of impeller geometry for an automotive torque converter.</span></span></span></span>展开更多
The objectives of this present investigation were to develop and formulate nimesulide bilayer tablets by using different polymer combinations and fillers, to optimize the formulations for different drug release variab...The objectives of this present investigation were to develop and formulate nimesulide bilayer tablets by using different polymer combinations and fillers, to optimize the formulations for different drug release variables by orthogonal design and central composite design-surface methodology and to evaluate drug release pattern of the optimized product. The bilayer tablet containing a fast release layer（FRL） and a sustained release layer（SRL） provided an initial burst release of nimesulide, followed by the sustained release for a period of time. The optimal formulation obtained was as follows：（I） the formulation of FRL： nimesulide, 50 mg; lactose, 92 mg; starch, 22 mg; CCMC-Na, 14 mg; PVP K30, 1 mg; micronized silica gel, 1 mg; magnesium stearate, 0.9 mg; and iron oxide red, 0.1 mg; and（II） the formulation of SRL： nimesulide, 150 mg; HPMC K100LV, 26 mg; HPMC K4M, 33 mg; lactose, 54 mg; PVP K30, 1 mg; micronized silica gel, 1 mg; and magnesium stearate, 0.9 mg. According to the optimal formulation, the biphasic type of release was identified. The in vitro drug dissolution from the bilayer tablets was sustained for about 16 h after releasing 15% of drug in the first 10 min. The developed nimesulide bilayer tablets with improved efficacy can perform therapeutically better than the conventional tablets.展开更多
基金Supported by Special Item for Guangxi Bagui Scholars(Guicaijiaohan [2017]143)
文摘[Objectives] The research aimed to optimize extraction process of Clerodendrum philippinum Schauer var. simplex Mlodenke total flavonoids( CPTF),and provide reference for its development and utilization. [Methods] Based on single-factor test,ethanol concentration,extraction temperature and extraction time were taken as independent variables,and total flavonoids yield was taken as dependent variable. The test was conducted according to central composite design principle. Multivariate linear regression and binomial equation fitting of the result were conducted,and extraction process of CPTF was optimized by using response surface methodology. [Results]The optimal extraction process of CPTF was as below: ethanol concentration 54. 76%,extraction temperature 83. 92℃,extraction time 102. 64 min,solid-liquid ratio 1:20,extraction for twice. [Conclusions] The extraction process of CPTF by central composite design-response surface methodology was simple and feasible,with reliable prediction result,which was suitable for industrial production.
基金Supported by Key Scientific and Technological Planning Project of Guangxi(Gui Ke Neng 10100027-4)
文摘[Objectives]To optimize extraction process of total flavonoids from Akebia trifoliata( Thunb.) Koidz.,so as to provide references for development and use of Akebia trifoliata( Thunb.) Koidz. [Methods]The extraction rate of total flavonoids of Akebia trifoliata( Thunb.)Koidz. was taken as observation indicator. On the basis of single factor experiment,central composite design( CCD) was used to evaluate the effects of the extraction temperature,extraction time,and ethanol concentration on the extraction process. Multiple linear regression and binomial fitting were used,and response surface methodology( RSM) was used to select the optimum extraction process. [Results] The optimum extraction process conditions for total flavonoids of Akebia trifoliata( Thunb.) Koidz. was extraction temperature: 83. 92 ℃; extraction time:96. 47 min; ethanol concentration: 63. 92%; extraction times: two times; solid to liquid ratio: 1 ∶ 20; extraction rate of total flavonoids:4. 55%. [Conclusions] The central composite design-response surface methodology( CCD-RSM) is simple,convenient,and feasible for extraction of total flavonoids from Akebia trifoliata( Thunb.) Koidz.,and the prediction results are reliable.
文摘Response surface methodology (RSM) using the central composite design (CCD) was applied to examine the impact of soda-anthraquinone pulping conditions on Grevillea robusta fall leaves. The pulping factors studied were: NaOH charge 5% to 20% w/v, pulping time 30 to 180 minutes, and the anthraquinone charge 0.1 to 0.5% w/w based on the oven-dried leaves. The responses evaluated were the pulp yield, cellulose content, and the degree of delignification. Various regression models were used to evaluate the effects of varying the pulping conditions. The optimum conditions attained were;NaOH charge of 14.63%, 0.1% anthraquinone, and a pulping period of 154 minutes, corresponding to 20.68% pulp yield, 80.56% cellulose content, and 70.34% lignin removal. Analysis of variance (ANOVA), was used to determine the most important variables that improve the extraction process of cellulose. The experiment outcomes matched those predicted by the model (Predicted R2 = 0.9980, Adjusted R2 = 0.9994), demonstrating the adequacy of the model used. FTIR analysis confirmed the elimination of the non-cellulosic fiber constituents. The lignin and hemicellulose-related bands (around 1514 cm−1, 1604 cm−1, 1239 cm−1, and 1734 cm−1) decreased with chemical treatment, indicating effective cellulose extraction by the soda-anthraquinone method. Similar results were obtained by XRD, SEM and thermogravimetric analysis of the extracted cellulose. Therefore, Grevillea robusta fall leaves are suitable renewable, cost-effective, and environmentally friendly non-wood biomass for cellulose extraction.
基金supported by the National Iranian Copper Industry Co.
文摘This study discussed the application of response surface methodology(RSM)and central composite rotatable design(CCRD)for modeling and optimization of the influence of some operating variables on the performance of a lab scale thickener for dewatering of tailing in the flotation circuit.Four thickener operating variables,namely feed flowrate,solid percent,flocculant dosage and feedwell height were changed during the tests based on CCRD.The ranges of values of the thickener variables used in the design were a feed flowrate of 9–21 L/min,solid percent of 8%–20%,flocculant dosage of 1.25–4.25 g/t and feedwell height of 16–26 cm.A total of 30 thickening tests were conducted using lab scale thickener on flotation tailing obtained from the Sarcheshmeh copper mine,Iran.The underflow solid percent and bed height were expressed as functions of four operating parameters of thickener.Predicted values were found to be in good agreement with experimental values(R2values of 0.992 and 0.997 for underflow solid percent and bed height,respectively).This study has shown that the RSM and CCRD could effciently be applied for the modeling of thickener for dewatering of flotation tailing.
基金Project (No. 2004C32049) supported by the Science and Technology Department of Zhejiang Province, China
文摘Objective: To study the optimal medium composition for xylanase production by Aspergillus niger XY-1 in solid-state fermentation (SSF). Methods: Statistical methodology including the Plackett-Burman design (PBD) and the central composite design (CCD) was employed to investigate the individual crucial component of the medium that significantly affected the enzyme yield. Results: Firstly, NaNO3, yeast extract, urea, Na2CO3, MgSO4, peptone and (NH4)2SO4 were screened as the significant factors positively affecting the xylanase production by PBD. Secondly, by valuating the nitrogen sources effect, urea was proved to be the most effective and economic nitrogen source for xylanase production and used for further optimization. Finally, the CCD and response surface methodology (RSM) were applied to determine the optimal concentration of each sig-nificant variable, which included urea, Na2CO3 and MgSO4. Subsequently a second-order polynomial was determined by multiple regression analysis. The optimum values of the critical components for maximum xylanase production were obtained as follows: x1 (urea)=0.163 (41.63 g/L), x2 (Na2CO3)=?1.68 (2.64 g/L), x3 (MgSO4)=1.338 (10.68 g/L) and the predicted xylanase value was 14374.6 U/g dry substrate. Using the optimized condition, xylanase production by Aspergillus niger XY-1 after 48 h fermentation reached 14637 U/g dry substrate with wheat bran in the shake flask. Conclusion: By using PBD and CCD, we obtained the optimal composition for xylanase production by Aspergillus niger XY-1 in SSF, and the results of no additional expensive medium and shortened fermentation time for higher xylanase production show the potential for industrial utilization.
文摘The interaction between sucrose, yeast extract and initial pH was investigated to optimize critical medium components for mycelium biomass and production of exopolysaccharide (EPS) of Lentinus squarrosulus using Response Surface Methodology (RSM). A central composite design (CCD) was applied and a polynomial regression model with quadratic term was used to analyse the experimental data using analysis of variance (ANOVA). ANOVA analysis showed that the model was very significant (p Lentinus squarrosulus are as follows: sucrose concentration 114.61 g/L, yeast extract 1.62 g/L and initial pH of 5.81;sucrose concentration 115.8 g/L, yeast extract of 3.39 g/L and initial pH of 6.44 respectively.
文摘Objective: The Response Surface Methodology (RSM) is a commonly used system to optimize cell viability of probiotic strains when they are subjected to different preservation and storage processes. Methods and Results: To determine the optimal levels of incorporation of several cry oprotectants (skim milk, sucrose and trehalose) in the freeze-drying process of Lactobacillus plantarum, a range of experiments based on a Rotational Central Composite design (CCD) were conducted. The results were adjusted to a quadratic model, resulting in the presence of interaction between the different variables. Solving a regression equation, we obtained the optimum concentrations of cryoprotective agents: 24.06% milk powder, 6.22% sucrose, 5.63% trehalose. To visualize the interactions between the three variables involved in the study, Design Expert? software was used. Conclusions: The analysis reveals that while trehalose has a direct effect on the viability of L. plantarum, skim milk and sucrose exert quadratic effects. There are also interactions between cryoprotectants, which emphasize the synergies produced between milk and sucrose and between sucrose and trehalose, which allows maintaining the viability of L. plantarum. Significance and Impact of the Study: The addition of new oligosaccharides as trehalose in premixtures for functional feed can maintain the viability of L. plantarum during longer periods of time, ensuring the proper administration of probiotics to their destinations.
基金Key Scientific and Technological Project of Henan Province,China(No.162102210084)
文摘The decolorization of reactive blue 19(RB-19)as a model dye from aqueous solutions has been studied by means of the dielectric barrier discharge(DBD)process.The independent parameters of input power,initial dye concentration and initial pH value were evaluated respectively.Experimental data were optimized by means of a 33 factorial design and response surface methodology(RSM).The dye was quickly removed during the treatment,yielding 96.9%of decolorization efficiency under optimized conditions.Therefore,the total organic carbon(TOC)and chemical oxygen demand(CODcr)results indicated that only the chromophore was destroyed rather than completed oxidation.This was confirmed with UV-vis and tertiary butanol assessments during the DBD treatment.
文摘This work investigates coag-flocculation optimization treatment of alum-brewery effluent system via response surface methodology (RSM). To minimize suspended and dissolved particles (SDP), experiments were carried out using nephelometric jar test and 23-factorial design with three star-points, six-center-points and two replications. A central composite design, which is the standard design of RSM, was used to evaluate the effects and interactions of three major factors (coagulation pH, coagulant dosage, settling time) on the treatment efficiency. Multivariable quadratic model developed for the response studied indicates the optimum conditions to be 9, 500mg/l and 20minutes for coagulation pH, coagulant dosage and settling time, respectively. At optimum, the SDP was reduced from 10831.490mg/l to 801.451mg/l, representing 92.601% removal efficiency. RSM has demonstrated to be appropriate approach for the optimization of the coag-flocculation process by statistical evaluation.
文摘Response surface methodology (RSM) based on desirability function approach (DFA) is applied to obtain an optimal design of the impeller geometry for an automotive torque converter. <span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">The relative importance of six design parameters including impeller blade number, blade thickness, bias angle, scroll angle, inlet angle and exit angle is investigated using orthogonal design approach. </span></span></span></span><span><span><span style="font-family:""><span style="font-family:Verdana;">The impeller inlet angle, exit angle and bias angle </span><span style="font-family:Verdana;">are found to exert the greatest influence on the overall performance of a torque converter, with two flow area factors being considered, namely 17% and 20%. Then, RSM together with central composite design (CCD) method is used to in-depth evaluate the interaction effect of the three key parameters on converter performance. The results demonstrate that </span><span style="font-family:Verdana;">impeller exit angle has the strongest impact on peak efficiency</span><span style="font-family:Verdana;">, with larger angles yielding the most favorable results. The stall torque ratio maximization is attainable with the increase of impeller bias angle and inlet angle together with smaller exit angle. In the end, </span><span style="font-family:Verdana;">an optimized design for the impeller geometry is obtained with stall torque ratio and peak efficiency increased by 1.62% and 1.1%, respectively.</span><span style="font-family:Verdana;"> The new optimization method can be used as a reference for performance enhancement in the design process of impeller geometry for an automotive torque converter.</span></span></span></span>
基金Important National Science & Technology Specific Projects of China(Grant No.2012ZX09301003-001-009)
文摘The objectives of this present investigation were to develop and formulate nimesulide bilayer tablets by using different polymer combinations and fillers, to optimize the formulations for different drug release variables by orthogonal design and central composite design-surface methodology and to evaluate drug release pattern of the optimized product. The bilayer tablet containing a fast release layer（FRL） and a sustained release layer（SRL） provided an initial burst release of nimesulide, followed by the sustained release for a period of time. The optimal formulation obtained was as follows：（I） the formulation of FRL： nimesulide, 50 mg; lactose, 92 mg; starch, 22 mg; CCMC-Na, 14 mg; PVP K30, 1 mg; micronized silica gel, 1 mg; magnesium stearate, 0.9 mg; and iron oxide red, 0.1 mg; and（II） the formulation of SRL： nimesulide, 150 mg; HPMC K100LV, 26 mg; HPMC K4M, 33 mg; lactose, 54 mg; PVP K30, 1 mg; micronized silica gel, 1 mg; and magnesium stearate, 0.9 mg. According to the optimal formulation, the biphasic type of release was identified. The in vitro drug dissolution from the bilayer tablets was sustained for about 16 h after releasing 15% of drug in the first 10 min. The developed nimesulide bilayer tablets with improved efficacy can perform therapeutically better than the conventional tablets.
