Phosphorus fertilizers from less pure sedimentary sources become increasingly important, due to depletion of phosphorus from igneous rock of high quality. Consequently, robust methods with potential to remove various ...Phosphorus fertilizers from less pure sedimentary sources become increasingly important, due to depletion of phosphorus from igneous rock of high quality. Consequently, robust methods with potential to remove various types of hazardous elements are required. Among such impurities, hexavalent chromium (Cr(VI)) is very likely to become a future challenge. Different industrial ways to treat phosphate rock are currently being practised, and we have here studied how chromium behaves when using the nitro-phosphate process. The reduction mechanism of Cr (VI) in nitric acid and phosphoric acid solutions was investigated by measuring redox potential and UV-VIS spectra. The results show that Cr (VI) is not stable in strong nitric acid solutions. Reduction of Cr (VI) species decreased with decreasing temperature, NO<sub>2</sub> concentration, ionic strength and absence of light. These findings support the proposed reduction reaction:The reduction rate was observed proportional to the nitric acid decomposition: .展开更多
Metal trace elements (MTE) are among the most harmful micropollutants of natural waters. Eliminating them helps improve the quality and safety of drinking water and protect human health. In this work, we used mango ke...Metal trace elements (MTE) are among the most harmful micropollutants of natural waters. Eliminating them helps improve the quality and safety of drinking water and protect human health. In this work, we used mango kernel powder (MKP) as bioadsorbent material for removal of Cr (VI) from water. Uv-visible spectroscopy was used to monitor and quantify Cr (VI) during processing using the Beer-Lambert formula. Some parameters such as pH, mango powder, mass and contact time were optimized to determine adsorption capacity and chromium removal rate. Adsorption kinetics, equilibrium, isotherms and thermodynamic parameters such as ΔG˚, ΔH˚, and ΔS˚, as well as FTIR were studied to better understand the Cr (VI) removal process by MKP. The adsorption capacity reached 94.87 mg/g, for an optimal contact time of 30 min at 298 K. The obtained results are in accordance with a pseudo-second order Freundlich adsorption isotherm model. Finally FTIR was used to monitor the evolution of absorption bands, while Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) were used to evaluate surface properties and morphology of the adsorbent.展开更多
We investigated the effects of calcination temperature(950-1450℃),steel slag content,and the total chromium content of steel slag on the Cr^(6+)contents of clinker samples produced using steel slags with different ch...We investigated the effects of calcination temperature(950-1450℃),steel slag content,and the total chromium content of steel slag on the Cr^(6+)contents of clinker samples produced using steel slags with different chromium contents.Additionally,the reactions of chromium in clinker(produced using steel slag)during calcination were studied.It is found that Cr^(6+)conversion increases with increasing calcination temperature to 1250℃,reaching a maximum of 43%-79%,before decreasing to 18%-42%at 1450℃.Cr^(6+)is mainly formed by the oxidation of trivalent chromium(Cr^(3+))during the solid-phase reaction stage of clinker calcination.Furthermore,the Cr^(6+)content of a clinker sample is proportional to the chromium content of its raw meal precursor and is mainly in the form of water-insoluble calcium chromate(CaCrO_(4)).The chromium in clinker is mainly distributed in tricalcium aluminate and tetracalcium aluminoferrite,however,some is present in silicate minerals.We expect to inform the monitoring and control of the Cr^(6+)content of clinker(produced using steel slag)and resulting cement.展开更多
Phosphorus(P)is an essential nutrient for many organisms in the ocean,which plays a central role in the stability of ecosystems and the evolution of the environment.The distribution,occurrence and source-sink process ...Phosphorus(P)is an essential nutrient for many organisms in the ocean,which plays a central role in the stability of ecosystems and the evolution of the environment.The distribution,occurrence and source-sink process of P in offshore waters are highly influenced by mariculture activities.P transformation in water-sediment system is the key process in P cycling,however,the mechanism is poorly documented in the coastal sea which is influenced by human activities.Based on the comprehensive surveys in the adjacent waters outside Rushan Bay in May,July and August 2014 and February 2015,the form and transformation of P in the suspended particulate matter(SPM)and surface sediment were analyzed.The results showed that contents of total P,authigenic P and organic P of SPM increased with the increase in distance from the shoreline off Rushan Bay,and the detrital-P decreased.The partition coefficient of P between water and SPM was related to the chemical activity of different forms of P,and a higher reactivity of inorganic P associated with SPM was observed.Hypoxia induced by mariculture changes the distribution and morphological composition of P in SPM and sediment in this typical aquaculture area,which can result in a conversion of sink to source of P in the sediment,thereby having a significant impact on the regional nutrient budget and associated with eutrophication.展开更多
A new magnetic nanocomposite chitosan/EDTA/CeZnO(MEC-CeZnO)is synthesized as an efficient and eco-friendly bio-compound for the removal of chromium Cr(VI)metal ions and phenol organic matters from aqueous solutions.Na...A new magnetic nanocomposite chitosan/EDTA/CeZnO(MEC-CeZnO)is synthesized as an efficient and eco-friendly bio-compound for the removal of chromium Cr(VI)metal ions and phenol organic matters from aqueous solutions.Nanocomposites are characterized using field emission scanning electron microscope,energy dispersive X-ray spectroscopy,transmission electron microscope,X-ray diffraction,X-ray photoelectron spectroscopy,Fourier transform infrared spectroscopy,diffuse reflection spectroscopy,and PL methods.The reduction rate of Cr(VI)ions and phenol degradation is evaluated under various experimental conditions,separately and simultaneously.The average pore diameter and specific surface of MEC-CeZnO nanocomposite are obtained 50 nm and 210 m^(2)·g^(-1)respectively,which suggest the successful synthesis of the nanocomposite because of the increased surface area and reduced pores in comparison to previous studies.Moreover,the best Cr(VI)and phenol reduction efficiencies are 98%and 92%at 180 min of retention time,both following the Langmuir-Hinshelwood first-order kinetics.The mechanisms of Cr(VI)and phenol removal from aqueous solutions involved Cr(VI)reduction,phenol oxidation,and adsorption.Examining the reusability of MEC-CeZnO showed that both degradation and recovery capacity is stable in 5 cycles.展开更多
A chemical composite plating of Ni-B_(4)C was used to prepare the surface-modified zirconia toughened alumina(ZTA)ceramic particles.The ceramic preforms were prepared by the plated ZTA and sodium silicate solution bin...A chemical composite plating of Ni-B_(4)C was used to prepare the surface-modified zirconia toughened alumina(ZTA)ceramic particles.The ceramic preforms were prepared by the plated ZTA and sodium silicate solution binder,followed by casting infiltration to prepare the ZTA particles reinforced high chromium cast iron(HCCI)composites.The result reveals that a distinct interface layer forms at the ZTA/HCCI interface,which consists of phases of ZrB_(2),FeB,Fe_(2)B,and NaSiO_(4).The interfacial wettability between ZTA and HCCI is improved by the diffusion and reaction of Ni and B_(4)C.The wear test reveals that the Ni-B_(4)C plated ZTA particles can effectively improve the wear resistance of the ZTA/HCCI composite,and the wear rate of the composite is decreased to 11.6%of HCCI.展开更多
The objective of this research was to evaluate the influences that supplemental dietary chromium propionate (CrP;0 or 0.4 mg·kg<sup>-</sup><sup>1</sup> added to the total diet on a DM basi...The objective of this research was to evaluate the influences that supplemental dietary chromium propionate (CrP;0 or 0.4 mg·kg<sup>-</sup><sup>1</sup> added to the total diet on a DM basis) has on plasma indicators of energy status in newly weaned steers upon introduction to the feedlot. For this experiment single source, Angus steers (n = 28;BW = 289 ± 12.0 kg) from a ranch in Western South Dakota were weaned and immediately shipped 579 km to the Ruminant Nutrition Center (RNC) in Brookings, SD. Steers were allotted to one of four 7.6 m × 7.6 m pens (2 pens/diet;7 steers/pen) at 4 d post-arrival to the RNC and test diets were initiated. No anabolic implant was used in this study. Subsequent BW measurements were obtained at 1400 h, to accommodate a post-prandial timing for blood sampling. This was 4 h after initial access to feed, and immediately prior to the afternoon feed delivery. Weights and blood sampling occurred on d 5, 12, 19, and 33. Whole blood samples were collected from all steers via jugular venipuncture and separated as plasma. There were no diet x day interactions (P ≥ 0.51) for plasma glucose, insulin, or urea-N. Plasma glucose, insulin, and urea-n levels were similar between diets (P ≥ 0.35). Plasma glucose and urea-n levels were not different across days (P ≥ 0.59). Insulin levels differed as a result of days of adaptation and were greatest (P = 0.01) on d 12 regardless of diet. There tended (P = 0.12) to be a diet x day interaction for NEFA levels. Plasma NEFA levels tended to be lower (P = 0.13) for calves fed CrP on d 5, and were greater (P = 0.09) on d 12 in calves fed CrP. The shift in NEFA on d 12 coincided with the spike in insulin levels. Both events occurred at the time that NEg intake was approaching the acclimated plateau and neither event impacted glucose status. In non-ruminants, elevated insulin concentrations decrease circulating NEFA levels. We detected minimal differences in regard to plasma indicators of lipid metabolism in this study due to chromium supplementation. These data indicate that ruminants may differ from non-ruminants in the regulation and maintenance of glucose status and body fat catabolism during the post-absorptive state.展开更多
Cr(Ⅵ)-amended soil was inoculated with Cr(Ⅵ)-reducing strain,Bacillus sp.XW-4 and incubated at 28 ℃in an incubator. Cr(Ⅵ)reduction,available Cr and Cr fractionin soils were studied.The results show that addition o...Cr(Ⅵ)-amended soil was inoculated with Cr(Ⅵ)-reducing strain,Bacillus sp.XW-4 and incubated at 28 ℃in an incubator. Cr(Ⅵ)reduction,available Cr and Cr fractionin soils were studied.The results show that addition of Bacillus sp.XW-4 can promote Cr(Ⅵ)reduction,but inoculation of this strain has a negative effect on the decrease of available Cr content in soil.In controls (without this strain)amended with 100 and 200 mg/kg of Cr(Ⅵ),Cr(Ⅵ)contents decrease to about 41 and 92 mg/kg respectively after incubation of 4 d,while in soil inoculated with XW-4,Cr(Ⅵ)contents decrease to about 18 and 60 mg/kg,respectively.The content of available Cr in soils with inoculation of XW-4 is higher than that in controls.Chromium is partitioned into water soluble Cr,exchangeable Cr,precipitated Cr,Cr bound to organics and residual Cr.The highest content of Cr is observed in residual form and water soluble Cr is not detected for all treatments after 42 d,but the soils inoculated with Bacillus sp.XW-4 contain higher content of exchangeable Cr and lower content of precipitated Cr than the soil without the inoculum.Inoculation of Bacillus sp.XW-4 can increase chromium activity in soils.展开更多
Cr(III)ehydrolyzed polyacrylamide(HPAM)gels have been extensively studied as a promising strategy controlling waste water production for mature oilfields.However,the gelation time of the current technologies is not lo...Cr(III)ehydrolyzed polyacrylamide(HPAM)gels have been extensively studied as a promising strategy controlling waste water production for mature oilfields.However,the gelation time of the current technologies is not long enough for in-depth placement.In this study,we report a novel synthesis method to obtain chromium chloride/poly(methyl methacrylate)(PMMA)nanocapsules which can significantly delay the gelation of HPAM through encapsulating the chromium chloride crosslinker.The chromium chloride-loaded nanocapsules(CreNC)are prepared via a facile inverse miniemulsion evaporation method during which the hydrophobic PMMA polymers,pre-dispersed in an organic solvent,were carefully controlled to precipitate onto stable aqueous miniemulsion droplets.The stable aqueous nanodroplets(W)containing Cr(III)are dispersed in a mixture of organic solvent(O1)with PMMA and nonsolvent medium(O2)to prepare an inverse miniemulsion.With the evaporation of the O1,PMMA forms CreNCs around the aqueous droplets.The CreNCs are readily transferred into water from the organic nonsolvent phase.The CreNCs exhibit the tunable size(358-983 nm),Cr loading(7.1%-19.1%),and Cr entrapment efficiency(11.7%-80.2%),with tunable zeta potentials in different PVA solutions.The CreNCs can delay release of Cr(III)and prolong the gelation time of HPAM up to 27 days.展开更多
To prevent dense chromium oxide covers from cracking during firing,such as internal cracking,surface cracking and fracture,the firing process of dense chromium oxide products was simulated,and the performance paramete...To prevent dense chromium oxide covers from cracking during firing,such as internal cracking,surface cracking and fracture,the firing process of dense chromium oxide products was simulated,and the performance parameters at several specific temperatures before and after densification of chromium oxide green bodies were tested.The temperature difference and the stress difference of chromium oxide green bodies were calculated by Finite Element Software at heating and cooling rates of 10,20,30 and 40℃·h^(-1),respectively.The results show that large temperature difference and thermal stress difference are the main causes of internal cracking,surface cracking and fracture of the brick.Suitable heating rates reduce or avoid internal cracking of the brick.When the heating rate is 30℃·h^(-1) below 1450℃and 10℃·h^(-1) above 1450℃,the temperature difference and the thermal stress difference in the brick are below 4℃and 4 MPa,respectively,and there is no internal crack in the brick after firing.The initial cooling stage is the key stage that causes cracking or fracture of bricks.When the cooling rate is 20℃·h^(-1) above 1450℃,the thermal stress difference in the brick is less than 4 MPa,which can significantly reduce the surface cracks and fracture of the brick.展开更多
Alumina-magnesia dry materials are widely used in induction furnace linings, but they show different kinds of damage when melting different kinds of alloy steel. In this paper, the chemical composition, phase composit...Alumina-magnesia dry materials are widely used in induction furnace linings, but they show different kinds of damage when melting different kinds of alloy steel. In this paper, the chemical composition, phase composition, and microstructure of the post-use dry materials for the working liners melting different kinds of steel were evaluated. Furthermore, the corrosion mechanism of the steel on the furnace lining materials was comprehensively analyzed. The findings reveal a significant ability of the Mn element in the molten steel to diffuse and penetrate into the refractories. Mn oxidizes to form MnO at the steel-refractory interface, and then forms a liquid phase with Al_(2)O_(3). The Cr element is dissolved into corundum and spinel of the refractories, resulting in lattice defects and structural damage of the materials. TiO2reacts with Al_(2)O_(3) to form Al_(2)TiO_(5), which plays a crucial role in preventing crack formation and propagation. Part of Ti4+dissolves into magnesia-alumina(MA), densifying the materials. TiO2also slows down the reaction between the Cr element and refractory components, further improving the corrosion resistance of the materials.展开更多
文摘Phosphorus fertilizers from less pure sedimentary sources become increasingly important, due to depletion of phosphorus from igneous rock of high quality. Consequently, robust methods with potential to remove various types of hazardous elements are required. Among such impurities, hexavalent chromium (Cr(VI)) is very likely to become a future challenge. Different industrial ways to treat phosphate rock are currently being practised, and we have here studied how chromium behaves when using the nitro-phosphate process. The reduction mechanism of Cr (VI) in nitric acid and phosphoric acid solutions was investigated by measuring redox potential and UV-VIS spectra. The results show that Cr (VI) is not stable in strong nitric acid solutions. Reduction of Cr (VI) species decreased with decreasing temperature, NO<sub>2</sub> concentration, ionic strength and absence of light. These findings support the proposed reduction reaction:The reduction rate was observed proportional to the nitric acid decomposition: .
文摘Metal trace elements (MTE) are among the most harmful micropollutants of natural waters. Eliminating them helps improve the quality and safety of drinking water and protect human health. In this work, we used mango kernel powder (MKP) as bioadsorbent material for removal of Cr (VI) from water. Uv-visible spectroscopy was used to monitor and quantify Cr (VI) during processing using the Beer-Lambert formula. Some parameters such as pH, mango powder, mass and contact time were optimized to determine adsorption capacity and chromium removal rate. Adsorption kinetics, equilibrium, isotherms and thermodynamic parameters such as ΔG˚, ΔH˚, and ΔS˚, as well as FTIR were studied to better understand the Cr (VI) removal process by MKP. The adsorption capacity reached 94.87 mg/g, for an optimal contact time of 30 min at 298 K. The obtained results are in accordance with a pseudo-second order Freundlich adsorption isotherm model. Finally FTIR was used to monitor the evolution of absorption bands, while Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) were used to evaluate surface properties and morphology of the adsorbent.
文摘We investigated the effects of calcination temperature(950-1450℃),steel slag content,and the total chromium content of steel slag on the Cr^(6+)contents of clinker samples produced using steel slags with different chromium contents.Additionally,the reactions of chromium in clinker(produced using steel slag)during calcination were studied.It is found that Cr^(6+)conversion increases with increasing calcination temperature to 1250℃,reaching a maximum of 43%-79%,before decreasing to 18%-42%at 1450℃.Cr^(6+)is mainly formed by the oxidation of trivalent chromium(Cr^(3+))during the solid-phase reaction stage of clinker calcination.Furthermore,the Cr^(6+)content of a clinker sample is proportional to the chromium content of its raw meal precursor and is mainly in the form of water-insoluble calcium chromate(CaCrO_(4)).The chromium in clinker is mainly distributed in tricalcium aluminate and tetracalcium aluminoferrite,however,some is present in silicate minerals.We expect to inform the monitoring and control of the Cr^(6+)content of clinker(produced using steel slag)and resulting cement.
基金The National Natural Science Foundation of China under contract Nos 41806097,42176048 and 42149902.
文摘Phosphorus(P)is an essential nutrient for many organisms in the ocean,which plays a central role in the stability of ecosystems and the evolution of the environment.The distribution,occurrence and source-sink process of P in offshore waters are highly influenced by mariculture activities.P transformation in water-sediment system is the key process in P cycling,however,the mechanism is poorly documented in the coastal sea which is influenced by human activities.Based on the comprehensive surveys in the adjacent waters outside Rushan Bay in May,July and August 2014 and February 2015,the form and transformation of P in the suspended particulate matter(SPM)and surface sediment were analyzed.The results showed that contents of total P,authigenic P and organic P of SPM increased with the increase in distance from the shoreline off Rushan Bay,and the detrital-P decreased.The partition coefficient of P between water and SPM was related to the chemical activity of different forms of P,and a higher reactivity of inorganic P associated with SPM was observed.Hypoxia induced by mariculture changes the distribution and morphological composition of P in SPM and sediment in this typical aquaculture area,which can result in a conversion of sink to source of P in the sediment,thereby having a significant impact on the regional nutrient budget and associated with eutrophication.
文摘A new magnetic nanocomposite chitosan/EDTA/CeZnO(MEC-CeZnO)is synthesized as an efficient and eco-friendly bio-compound for the removal of chromium Cr(VI)metal ions and phenol organic matters from aqueous solutions.Nanocomposites are characterized using field emission scanning electron microscope,energy dispersive X-ray spectroscopy,transmission electron microscope,X-ray diffraction,X-ray photoelectron spectroscopy,Fourier transform infrared spectroscopy,diffuse reflection spectroscopy,and PL methods.The reduction rate of Cr(VI)ions and phenol degradation is evaluated under various experimental conditions,separately and simultaneously.The average pore diameter and specific surface of MEC-CeZnO nanocomposite are obtained 50 nm and 210 m^(2)·g^(-1)respectively,which suggest the successful synthesis of the nanocomposite because of the increased surface area and reduced pores in comparison to previous studies.Moreover,the best Cr(VI)and phenol reduction efficiencies are 98%and 92%at 180 min of retention time,both following the Langmuir-Hinshelwood first-order kinetics.The mechanisms of Cr(VI)and phenol removal from aqueous solutions involved Cr(VI)reduction,phenol oxidation,and adsorption.Examining the reusability of MEC-CeZnO showed that both degradation and recovery capacity is stable in 5 cycles.
基金financially supported by the National Natural Science Foundation of China(52005217)the University Research Platform and Research Projects of Guangdong Education Department(2022ZDZX3003)+2 种基金Basic and Applied Basic Research Fund Project of Guangdong Province in China(2022A1515010091,2021A1515010523,and 2020A1515110020)Basic Scientific Research Projects of Central Universities(No.21620344)Jinan University Open Fund for Advanced Materials(JNIWRM2021004)。
文摘A chemical composite plating of Ni-B_(4)C was used to prepare the surface-modified zirconia toughened alumina(ZTA)ceramic particles.The ceramic preforms were prepared by the plated ZTA and sodium silicate solution binder,followed by casting infiltration to prepare the ZTA particles reinforced high chromium cast iron(HCCI)composites.The result reveals that a distinct interface layer forms at the ZTA/HCCI interface,which consists of phases of ZrB_(2),FeB,Fe_(2)B,and NaSiO_(4).The interfacial wettability between ZTA and HCCI is improved by the diffusion and reaction of Ni and B_(4)C.The wear test reveals that the Ni-B_(4)C plated ZTA particles can effectively improve the wear resistance of the ZTA/HCCI composite,and the wear rate of the composite is decreased to 11.6%of HCCI.
文摘The objective of this research was to evaluate the influences that supplemental dietary chromium propionate (CrP;0 or 0.4 mg·kg<sup>-</sup><sup>1</sup> added to the total diet on a DM basis) has on plasma indicators of energy status in newly weaned steers upon introduction to the feedlot. For this experiment single source, Angus steers (n = 28;BW = 289 ± 12.0 kg) from a ranch in Western South Dakota were weaned and immediately shipped 579 km to the Ruminant Nutrition Center (RNC) in Brookings, SD. Steers were allotted to one of four 7.6 m × 7.6 m pens (2 pens/diet;7 steers/pen) at 4 d post-arrival to the RNC and test diets were initiated. No anabolic implant was used in this study. Subsequent BW measurements were obtained at 1400 h, to accommodate a post-prandial timing for blood sampling. This was 4 h after initial access to feed, and immediately prior to the afternoon feed delivery. Weights and blood sampling occurred on d 5, 12, 19, and 33. Whole blood samples were collected from all steers via jugular venipuncture and separated as plasma. There were no diet x day interactions (P ≥ 0.51) for plasma glucose, insulin, or urea-N. Plasma glucose, insulin, and urea-n levels were similar between diets (P ≥ 0.35). Plasma glucose and urea-n levels were not different across days (P ≥ 0.59). Insulin levels differed as a result of days of adaptation and were greatest (P = 0.01) on d 12 regardless of diet. There tended (P = 0.12) to be a diet x day interaction for NEFA levels. Plasma NEFA levels tended to be lower (P = 0.13) for calves fed CrP on d 5, and were greater (P = 0.09) on d 12 in calves fed CrP. The shift in NEFA on d 12 coincided with the spike in insulin levels. Both events occurred at the time that NEg intake was approaching the acclimated plateau and neither event impacted glucose status. In non-ruminants, elevated insulin concentrations decrease circulating NEFA levels. We detected minimal differences in regard to plasma indicators of lipid metabolism in this study due to chromium supplementation. These data indicate that ruminants may differ from non-ruminants in the regulation and maintenance of glucose status and body fat catabolism during the post-absorptive state.
基金Project(20050532009)supported by the Doctoral Foundation of Ministry of Education of ChinaProject supported by Program for Changjiang Scholars and Innovative Research Team in University
文摘Cr(Ⅵ)-amended soil was inoculated with Cr(Ⅵ)-reducing strain,Bacillus sp.XW-4 and incubated at 28 ℃in an incubator. Cr(Ⅵ)reduction,available Cr and Cr fractionin soils were studied.The results show that addition of Bacillus sp.XW-4 can promote Cr(Ⅵ)reduction,but inoculation of this strain has a negative effect on the decrease of available Cr content in soil.In controls (without this strain)amended with 100 and 200 mg/kg of Cr(Ⅵ),Cr(Ⅵ)contents decrease to about 41 and 92 mg/kg respectively after incubation of 4 d,while in soil inoculated with XW-4,Cr(Ⅵ)contents decrease to about 18 and 60 mg/kg,respectively.The content of available Cr in soils with inoculation of XW-4 is higher than that in controls.Chromium is partitioned into water soluble Cr,exchangeable Cr,precipitated Cr,Cr bound to organics and residual Cr.The highest content of Cr is observed in residual form and water soluble Cr is not detected for all treatments after 42 d,but the soils inoculated with Bacillus sp.XW-4 contain higher content of exchangeable Cr and lower content of precipitated Cr than the soil without the inoculum.Inoculation of Bacillus sp.XW-4 can increase chromium activity in soils.
基金The authors were also supported by the National Natural Science Foundation of China(grant number 52104057 and 52204041)Natural Science Foundation of Shandong Province(grant number ZR2021QE106)China Postdoctoral Science Foundation(grant number 2021M693506)during the writing of this paper at China University of Petroleum(East China).
文摘Cr(III)ehydrolyzed polyacrylamide(HPAM)gels have been extensively studied as a promising strategy controlling waste water production for mature oilfields.However,the gelation time of the current technologies is not long enough for in-depth placement.In this study,we report a novel synthesis method to obtain chromium chloride/poly(methyl methacrylate)(PMMA)nanocapsules which can significantly delay the gelation of HPAM through encapsulating the chromium chloride crosslinker.The chromium chloride-loaded nanocapsules(CreNC)are prepared via a facile inverse miniemulsion evaporation method during which the hydrophobic PMMA polymers,pre-dispersed in an organic solvent,were carefully controlled to precipitate onto stable aqueous miniemulsion droplets.The stable aqueous nanodroplets(W)containing Cr(III)are dispersed in a mixture of organic solvent(O1)with PMMA and nonsolvent medium(O2)to prepare an inverse miniemulsion.With the evaporation of the O1,PMMA forms CreNCs around the aqueous droplets.The CreNCs are readily transferred into water from the organic nonsolvent phase.The CreNCs exhibit the tunable size(358-983 nm),Cr loading(7.1%-19.1%),and Cr entrapment efficiency(11.7%-80.2%),with tunable zeta potentials in different PVA solutions.The CreNCs can delay release of Cr(III)and prolong the gelation time of HPAM up to 27 days.
文摘To prevent dense chromium oxide covers from cracking during firing,such as internal cracking,surface cracking and fracture,the firing process of dense chromium oxide products was simulated,and the performance parameters at several specific temperatures before and after densification of chromium oxide green bodies were tested.The temperature difference and the stress difference of chromium oxide green bodies were calculated by Finite Element Software at heating and cooling rates of 10,20,30 and 40℃·h^(-1),respectively.The results show that large temperature difference and thermal stress difference are the main causes of internal cracking,surface cracking and fracture of the brick.Suitable heating rates reduce or avoid internal cracking of the brick.When the heating rate is 30℃·h^(-1) below 1450℃and 10℃·h^(-1) above 1450℃,the temperature difference and the thermal stress difference in the brick are below 4℃and 4 MPa,respectively,and there is no internal crack in the brick after firing.The initial cooling stage is the key stage that causes cracking or fracture of bricks.When the cooling rate is 20℃·h^(-1) above 1450℃,the thermal stress difference in the brick is less than 4 MPa,which can significantly reduce the surface cracks and fracture of the brick.
基金the National Natural Science Foundation of China(52272022)Key Program of Natural Science Foundation of Hubei Province(2021CFA071).
文摘Alumina-magnesia dry materials are widely used in induction furnace linings, but they show different kinds of damage when melting different kinds of alloy steel. In this paper, the chemical composition, phase composition, and microstructure of the post-use dry materials for the working liners melting different kinds of steel were evaluated. Furthermore, the corrosion mechanism of the steel on the furnace lining materials was comprehensively analyzed. The findings reveal a significant ability of the Mn element in the molten steel to diffuse and penetrate into the refractories. Mn oxidizes to form MnO at the steel-refractory interface, and then forms a liquid phase with Al_(2)O_(3). The Cr element is dissolved into corundum and spinel of the refractories, resulting in lattice defects and structural damage of the materials. TiO2reacts with Al_(2)O_(3) to form Al_(2)TiO_(5), which plays a crucial role in preventing crack formation and propagation. Part of Ti4+dissolves into magnesia-alumina(MA), densifying the materials. TiO2also slows down the reaction between the Cr element and refractory components, further improving the corrosion resistance of the materials.