This study developed a numerical model to efficiently treat solid waste magnesium nitrate hydrate through multi-step chemical reactions.The model simulates two-phase flow,heat,and mass transfer processes in a pyrolysi...This study developed a numerical model to efficiently treat solid waste magnesium nitrate hydrate through multi-step chemical reactions.The model simulates two-phase flow,heat,and mass transfer processes in a pyrolysis furnace to improve the decomposition rate of magnesium nitrate.The performance of multi-nozzle and single-nozzle injection methods was evaluated,and the effects of primary and secondary nozzle flow ratios,velocity ratios,and secondary nozzle inclination angles on the decomposition rate were investigated.Results indicate that multi-nozzle injection has a higher conversion efficiency and decomposition rate than single-nozzle injection,with a 10.3%higher conversion rate under the design parameters.The decomposition rate is primarily dependent on the average residence time of particles,which can be increased by decreasing flow rate and velocity ratios and increasing the inclination angle of secondary nozzles.The optimal parameters are injection flow ratio of 40%,injection velocity ratio of 0.6,and secondary nozzle inclination of 30°,corresponding to a maximum decomposition rate of 99.33%.展开更多
Liquid phase exfoliation(LPE)process for graphene production is usually carried out in stirred tank reactor and the interactions between the solvent and the graphite particles are important as to improve the productio...Liquid phase exfoliation(LPE)process for graphene production is usually carried out in stirred tank reactor and the interactions between the solvent and the graphite particles are important as to improve the production efficiency.In this paper,these interactions were revealed by computational fluid dynamics–discrete element method(CFD-DEM)method.Based on simulation results,both liquid phase flow hydrodynamics and particle motion behavior have been analyzed,which gave the general information of the multiphase flow behavior inside the stirred tank reactor as to graphene production.By calculating the threshold at the beginning of graphite exfoliation process,the shear force from the slip velocity was determined as the active force.These results can support the optimization of the graphene production process.展开更多
This paper presents a time-efficient numerical approach to modelling high explosive(HE)blastwave propagation using Computational Fluid Dynamics(CFD).One of the main issues of using conventional CFD modelling in high e...This paper presents a time-efficient numerical approach to modelling high explosive(HE)blastwave propagation using Computational Fluid Dynamics(CFD).One of the main issues of using conventional CFD modelling in high explosive simulations is the ability to accurately define the initial blastwave properties that arise from the ignition and consequent explosion.Specialised codes often employ Jones-Wilkins-Lee(JWL)or similar equation of state(EOS)to simulate blasts.However,most available CFD codes are limited in terms of EOS modelling.They are restrictive to the Ideal Gas Law(IGL)for compressible flows,which is generally unsuitable for blast simulations.To this end,this paper presents a numerical approach to simulate blastwave propagation for any generic CFD code using the IGL EOS.A new method known as the Input Cavity Method(ICM)is defined where input conditions of the high explosives are given in the form of pressure,velocity and temperature time-history curves.These time history curves are input at a certain distance from the centre of the charge.It is shown that the ICM numerical method can accurately predict over-pressure and impulse time history at measured locations for the incident,reflective and complex multiple reflection scenarios with high numerical accuracy compared to experimental measurements.The ICM is compared to the Pressure Bubble Method(PBM),a common approach to replicating initial conditions for a high explosive in Finite Volume modelling.It is shown that the ICM outperforms the PBM on multiple fronts,such as peak values and overall overpressure curve shape.Finally,the paper also presents the importance of choosing an appropriate solver between the Pressure Based Solver(PBS)and Density-Based Solver(DBS)and provides the advantages and disadvantages of either choice.In general,it is shown that the PBS can resolve and capture the interactions of blastwaves to a higher degree of resolution than the DBS.This is achieved at a much higher computational cost,showing that the DBS is much preferred for quick turnarounds.展开更多
Background:The assessment of renal function is important to the prognosis of patients needing Fontan palliation due to the reconstructed compromised circulation.To know the relationship between the kidney perfusion an...Background:The assessment of renal function is important to the prognosis of patients needing Fontan palliation due to the reconstructed compromised circulation.To know the relationship between the kidney perfusion and hemodynamic characteristics during surgical design could reduce the risk of acute kidney injury(AKI)and the postoperative complications.However,the issue is still unsolved because the current clinical evaluation methods are unable to predict the hemodynamic changes in renal artery(RA).Methods:We reconstructed a three-dimensional(3D)vascular model of a patient requiring Fontan palliation.The technique of computational fluid dynamics(CFD)was utilized to explore the changes of RA hemodynamics under different possible blood flow rates.The relationship between the kidney perfusion and hemodynamic characteristics was investigated.Results:The calculated results indicated the declined tendency of the pressure and pressure drop as the flow rate decreased.When the flow rate decreased to two-thirds of its baseline,both the pressure of left renal artery(LRA)and the pressure of right renal artery(RRA)dipped below 50%,and the pressure of RRA fell more quickly than that of LRA.Uneven distribution of WSS was observed on the trunk of RA,and the lowest WSS was found at the distal of RA.The average WSS in RA dropped to around 50%as the flow rate reached one-third of its baseline.Conclusions:As a promising approach,CFD can be utilized to quantitatively evaluate the hemodynamic characteristics of RA and contribute to offsetting the drawbacks of clinical assessments of renal function,to help realize better prognosis for the patients with Fontan palliation.展开更多
Computational fluid dynamics(CFD)provides a powerful tool for investigating complicated fluid flows.This paper aims to study the applicability of CFD in the preliminary design of linear and nonlinear fluid viscous dam...Computational fluid dynamics(CFD)provides a powerful tool for investigating complicated fluid flows.This paper aims to study the applicability of CFD in the preliminary design of linear and nonlinear fluid viscous dampers.Two fluid viscous dampers were designed based on CFD models.The first device was a linear viscous damper with straight orifices.The second was a nonlinear viscous damper containing a one-way pressure-responsive valve inside its orifices.Both dampers were detailed based on CFD simulations,and their internal fluid flows were investigated.Full-scale specimens of both dampers were manufactured and tested under dynamic loads.According to the tests results,both dampers demonstrate stable cyclic behaviors,and as expected,the nonlinear damper generally tends to dissipate more energy compared to its linear counterpart.Good compatibility was achieved between the experimentally measured damper force-velocity curves and those estimated from CFD analyses.Using a thermography camera,a rise in temperature of the dampers was measured during the tests.It was found that output force of the manufactured devices was virtually independent of temperature even during long duration loadings.Accordingly,temperature dependence can be ignored in CFD models,because a reliable temperature compensator mechanism was used(or intended to be used)by the damper manufacturer.展开更多
The computational fluid dynamics(CFD)technology is analyzed and calculated utilizing the turbulence model and multiphase flow model to explore the performance of internal circulating fluidized beds(ICFB)based on CFD.T...The computational fluid dynamics(CFD)technology is analyzed and calculated utilizing the turbulence model and multiphase flow model to explore the performance of internal circulating fluidized beds(ICFB)based on CFD.The three-dimensional simulation method can study the hydrodynamic properties of the ICFB,and the performance of the fluidized bed is optimized.The fluidization performance of the ICFB is improved through the experimental study of the cross-shaped baffle.Then,through the cross-shaped baffle and funnel-shaped baffle placement,the fluidized bed reaches a coupled optimization.The results show that CFD simulation technology can effectively improve the mass transfer efficiency and performance of sewage treatment.The base gap crossshaped baffle can improve the hydraulic conditions of the fluidized bed and reduce the system energy consumption.The cross-shaped baffle and funnel-shaped baffle can perfect the performance of the reactor and effectively strengthen the treatment in the intense aerobic process of industrial sewage.展开更多
The present paper reviews the recent developments of a high⁃order⁃spectral method(HOS)and the combination with computational fluid dynamics(CFD)method for wave⁃structure interactions.As the numerical simulations of wa...The present paper reviews the recent developments of a high⁃order⁃spectral method(HOS)and the combination with computational fluid dynamics(CFD)method for wave⁃structure interactions.As the numerical simulations of wave⁃structure interaction require efficiency and accuracy,as well as the ability in calculating in open sea states,the HOS method has its strength in both generating extreme waves in open seas and fast convergence in simulations,while computational fluid dynamics(CFD)method has its advantages in simulating violent wave⁃structure interactions.This paper provides the new thoughts for fast and accurate simulations,as well as the future work on innovations in fine fluid field of numerical simulations.展开更多
Municipal Solid Waste (MSW) incineration is among the important opportunities to control the pollutions caused by improper dumping and flue gas emissions so as to meet the environmental guidelines. The objective of th...Municipal Solid Waste (MSW) incineration is among the important opportunities to control the pollutions caused by improper dumping and flue gas emissions so as to meet the environmental guidelines. The objective of this study was to design and develop a model for the MSW incineration process. The paper explains the design and development of MSW incinerator involving details of the Computational Fluid Dynamics (CFD) procedures through model design to the post process. CFD model was developed to reveal these features of the incineration process in the MSW incinerator. The model predicts the temperature in combustion chambers as well as at stack outlet of the incinerator. The solid waste characterization was done, and the laboratory analysis shows that, the Higher Heating Value (HHV) of the MSW is 11.65 MJ/kg on dry basis. The elemental composition MSW consists of 54.8%, 5.27%, 34.61%, 2.37% and 0.3% for Carbon, Hydrogen, Oxygen, Nitrogen and Sulphur respectively which are the input parameters for the CFD. The model simulation was positively achieved during combustion process and temperature in combustion chambers ranged between 930 K and 1700 K.展开更多
This work proposes a vibrating mesh screen as an alternative to the static mesh screen currently used in conventional flooded-bed dust scrubbers for removing airborne coal mine dust in the continuous mining environmen...This work proposes a vibrating mesh screen as an alternative to the static mesh screen currently used in conventional flooded-bed dust scrubbers for removing airborne coal mine dust in the continuous mining environment.Fundamental assessments suggest that a vibrating screen may improve the dust collection efficiency of scrubber systems and mitigate the clogging issues associated with the conventional design.To evaluate this hypothesis,computational fluid dynamics(CFD)simulations were carried out to assess the effects of vibration conditions(i.e.,frequency and amplitude)on the dust particle-mesh interaction and mesh wetting conditions,which are the two decisive factors in determining the dust collection efficiency.The results suggest that the vibrating mesh screen can enhance dust particle collision opportunities on the mesh and increase mesh wetted area as compared to the static mesh screen.The effects of mesh screen aperture,coal dust concentration,and spray nozzle flow rate on the performance of the vibrating mesh are also evaluated.Finally,a simplified three-phase flow simulation including airflow,dust particles,and water droplet spray is performed,and the results reflect a significant improvement of dust collection efficiency in the liquid-coated vibrating mesh screen.展开更多
Gas release and its dispersion is a major concern in chemical industries.In order to manage and mitigate the risk of gas dispersion and its consequences,it is necessary to predict gas dispersion behavior and its conce...Gas release and its dispersion is a major concern in chemical industries.In order to manage and mitigate the risk of gas dispersion and its consequences,it is necessary to predict gas dispersion behavior and its concentration at various locations upon emission.Therefore,models and commercial packages such as Phast and ALOHA have been developed.Computational fluid dynamics(CFD)can be a useful tool to simulate gas dispersion in complex areas and conditions.The validation of the models requires the employment of the experimental data from filed and wind tunnel experiments.It appears that the use of the experimental data to validate the CFD method that only includes certain monitor points and not the entire domain can lead to unreliable results for the intended areas of concern.In this work,some of the trials of the Kit Fox field experiment,which provided a wide-range database for gas dispersion,were simulated by CFD.Various scenarios were considered with different mesh sizes,physical conditions,and types of release.The results of the simulations were surveyed in the whole domain.The data matching each scenario was varied by the influence of the dominant displacement force(wind or diffusivity).Furthermore,the statistical parameters suggested for the heavy gas dispersion showed a dependency on the lower band of gas concentration.Therefore,they should be used with precaution.Finally,the results and computation cost of the simulation could be affected by the chosen scenario,the location of the intended points,and the release type.展开更多
Left ventricular assist device( LVAD) in this study is a mechanical tool that is used to support blood flow in the patient with heart disease. It supports left ventricle by building up the pressure to the pump outlet ...Left ventricular assist device( LVAD) in this study is a mechanical tool that is used to support blood flow in the patient with heart disease. It supports left ventricle by building up the pressure to the pump outlet connected to the aorta. This pump was designed based on the magnetic driven centrifugal pump with a unique small washout hole constructed inside the impeller to generate the washout flow passage to prevent the stagnation at the region underneath and around the rotor. Computational fluid dynamics( CFD) was adopted in this study to assess the performance and optimize the design to avoid recirculation and high shear stress which is the main cause of stagnation and blood damage. Transient simulation was used for this study due to the asymmetric design of the washout hole and the complication of the bottom support of the impeller that has a risk of thrombosis,also,it was used to predict the variation of hydraulic performance caused by the rotation of the impeller and pulsed flow at the pump inlet. The simulation results show no excessive stress and no recirculation observed within the computational domain; in addition,the research result also provides information for further optimization and development to the pump.展开更多
The present study aims at improving the accuracy of weather forecast by providing useful information on the behavior and response of a sounding temperature sensor.A hybrid approach relying on Computational Fluid Dynam...The present study aims at improving the accuracy of weather forecast by providing useful information on the behavior and response of a sounding temperature sensor.A hybrid approach relying on Computational Fluid Dynamics and a genetic algorithm(GA)is used to simulate the system represented by the bead thermistor and the surrounding air.In particular,the influence of different lead angles,sensor lead length,and lead number is considered.The results have shown that when the length of the lead wire of the bead thermistor is increased,the radiation temperature rise is reduced;when the number of lead wire is four and the angle between the lead wires is 180°,the solar radiation angle has a scarce influence on the radiation temperature rise of the sounding temperature sensor.展开更多
To solve the problem of temperature rise caused by the high power density of high-speed permanent magnet synchronous traction motors,the temperature rise of various components in the motor is analyzed by coupling the ...To solve the problem of temperature rise caused by the high power density of high-speed permanent magnet synchronous traction motors,the temperature rise of various components in the motor is analyzed by coupling the equivalent thermal circuit method and computational fluid dynamics.Also,a cooling strategy is proposed to solve the problem of temperature rise,which is expected to prolong the service life of these devices.First,the theoretical bases of the approaches used to study heat transfer and fluid mechanics are discussed,then the fluid flow for the considered motor is analyzed,and the equivalent thermal circuit method is introduced for the calculation of the temperature rise.Finally,the stator,rotor loss,motor temperature rise,and the proposed cooling method are also explored through experiments.According to the results,the stator temperature at 50,000 r/min and 60,000 r/min at no-load operation is 68℃ and 76℃,respectively.By monitoring the temperature of the air outlets inside and outside the motor at different speeds,it is also found that the motor reaches a stable temperature rise after 65 min of operation.Coupling of the thermal circuit method and computational fluid dynamics is a strategy that can provide the average temperature rise of each component and can also comprehensively calculate the temperature of each local point.We conclude that a hybrid cooling strategy based on axial air cooling of the inner air duct of the motor and water cooling of the stator can meet the design requirements for the ventilation and cooling of this type of motors.展开更多
An efficient and versatile intelligent algorithm is developed for the control of the cabin environment of wind power generators.The method can be used to monitor and solve wind power generation problems at the same ti...An efficient and versatile intelligent algorithm is developed for the control of the cabin environment of wind power generators.The method can be used to monitor and solve wind power generation problems at the same time.It also provides several advantages with respect to other traditional methods which imply significant workload and maintenance personnel.The functional requirements of the intelligent control system are analyzed,and a control algorithm for the stepping motor is selected and evaluated.Through the comparative analysis of the active power and internal temperature curve for three kinds of output power of the prototype,it is proved that the environmental intelligent control system greatly improves the operation efficiency,solves typical problems in the ventilator room environment,and provides a solid theoretical basis for further research in this field.展开更多
On the basis of harmonic mapping theory,a mobile grid technology is applied to computational fluid dynamics(CFD).Starting from the observation that standard fixed-grid techniques often fail in addressing problems with...On the basis of harmonic mapping theory,a mobile grid technology is applied to computational fluid dynamics(CFD).Starting from the observation that standard fixed-grid techniques often fail in addressing problems with large deformations,we elaborate a new algorithm relying on the software COMSOL Multiphysics 5.3a to solve the coupling of the mobile grid equation and the governing differential equations for fluid flow.The motion of water in a water tank when the tank waggles is simulated.We demonstrate that this technology can be implemented without a significant increase in the computational cost with respect to standard numerical methods.展开更多
River bank erosion models are an important prerequisite for understanding the development of river meanders and for estimating likely land-loss and potential danger to floodplain infrastructure. Although bank erosion ...River bank erosion models are an important prerequisite for understanding the development of river meanders and for estimating likely land-loss and potential danger to floodplain infrastructure. Although bank erosion models have been developed that consider large-scale mass failure, the contribution of fluvial erosion (the process of particle-by-particle erosion due to the shearing action of the river flow) to bank retreat has not received as much consideration. In principle, such fluvial bank erosion rates can be quantified using excess shear stress formulations, but in practice, it has proven difficult to estimate the parameters involved. In this study, a series of three-dimensional Computational Fluid Dynamics (CFD) simulations for a meander loop on the River Asker (200 m long) at Bridport in southern England were undertaken to elucidate the overall flow structures and in particular to provide estimates of the applied fluid shear stress exerted on the riverbanks. The CFD models, which simulated relatively low and relatively high flow conditions, were established using Fluent 6.2 software. The modelling outcomes show that the key qualitative features of the flow endure even as flow discharge varies. At bank full, the degrees of velocity and simulated shear stresses within the inner bank separation zones are shown to be higher than those observed under low flow conditions, and that these elevated shear stresses may be sufficient to result in the removal of accumulated sediments into the main downstream flow.展开更多
The principal objective of this work was to investigate the 3D flow field around a multi-bladed horizontal axis wind turbine (HAWT) rotor and to investigate its performance characteristics. The aerodynamic performance...The principal objective of this work was to investigate the 3D flow field around a multi-bladed horizontal axis wind turbine (HAWT) rotor and to investigate its performance characteristics. The aerodynamic performance of this novel rotor design was evaluated by means of a Computational Fluid Dynamics commercial package. The Reynolds Averaged Navier-Stokes (RANS) equations were selected to model the physics of the incompressible Newtonian fluid around the blades. The Shear Stress Transport (SST) <em>k</em>-<em>ω</em> turbulence model was chosen for the assessment of the 3D flow behavior as it had widely used in other HAWT studies. The pressure-based simulation was done on a model representing one-ninth of the rotor using a 40-degree periodicity in a single moving reference frame system. Analyzing the wake flow behavior over a wide range of wind speeds provided a clear vision of this novel rotor configuration. From the analysis, it was determined that the flow becomes accelerated in outer wake region downstream of the rotor and by placing a multi-bladed rotor with a larger diameter behind the forward rotor resulted in an acceleration of this wake flow which resulted in an increase the overall power output of the wind machine.展开更多
Dynamic simulation of a double-skin façade(DSF)with computational fluid dynamics(CFD)can be challenging due to the lack of validated models and benchmarking datasets.Furthermore,there is a lack of consensus in th...Dynamic simulation of a double-skin façade(DSF)with computational fluid dynamics(CFD)can be challenging due to the lack of validated models and benchmarking datasets.Furthermore,there is a lack of consensus in the scientific community on what constitutes a successfully validated DSF model.The present review study identifies simulation trends and research gaps for DSFs simulated with CFD.Additionally,this article presents a series of CFD simulations in which key aspects of the DSF modelling are varied:2D or 3D modelling approaches,turbulence viscosity models(TVMs),radiation models,and wall function.These simulation results are compared to the empirical data(both temperature and velocity fields)of a benchmark test with laboratory-controlled boundary conditions.This analysis shows that using the k-εRNG model with enhanced wall treatment and surface-to-surface(S2S)radiation model yields the best results for the 2D case of natural convection flow.Moreover,it is shown that accounting for the velocity field in the validation process is essential to ensure the suitability of a model.Finally,the authors advocate for the use of selected dimensionless numbers to improve the comparability of the different DSF scientific studies.This would also help to identify relevant experimental datasets for validation and suitable CFD simulation settings for specific DSF cases.展开更多
During the coronavirus disease 2019 pandemic,short-range virus transmission has been observed to have a higher risk of causing infection than long-range virus transmission.However,the roles played by the inhalation an...During the coronavirus disease 2019 pandemic,short-range virus transmission has been observed to have a higher risk of causing infection than long-range virus transmission.However,the roles played by the inhalation and large droplet routes cannot be distinguished in practice.A recent analytical study revealed the predominance of short-range inhalation over the large droplet spray route as causes of respiratory infections.In the current study,short-range exposure was analyzed via computational fluid dynamics(CFD)simulations using a discrete phase model.Detailed facial membranes,including eyes,nostrils,and a mouth,were considered.In CFD simulations,there is no need for a spherical approximation of the human head for estimating deposition nor the“anisokinetic aerosol sampling”approximation for estimating inhalation in the analytical model.We considered two scenarios(with two spheres[Scenario 1]and two human manikins[Scenario 2]),source-target distances of 0.2 to 2 m,and droplet diameters of 3 to 1,500μm.The overall CFD exposure results agree well with data previously obtained from a simple analytical model.The CFD results confirm the predominance of the short-range inhalation route beyond 0.2 m for expiratory droplets smaller than 50μm during talking and coughing.A critical droplet size of 87.5μm was found to differentiate droplet behaviors.The number of droplets deposited on the target head exceeded those exposed to facial membranes,which implies a risk of exposure through the immediate surface route over a short range.展开更多
We present quantum numerical methods for the typical initial boundary value problems(IBVPs)of convection-diffusion equations in fluid dynamics.The IBVP is discretized into a series of linear systems via finite differe...We present quantum numerical methods for the typical initial boundary value problems(IBVPs)of convection-diffusion equations in fluid dynamics.The IBVP is discretized into a series of linear systems via finite difference methods and explicit time marching schemes.To solve these discrete systems in quantum computers,we design a series of quantum circuits,including four stages of encoding,amplification,adding source terms,and incorporating boundary conditions.In the encoding stage,the initial condition is encoded in the amplitudes of quantum registers as a state vector to take advantage of quantum algorithms in space complexity.In the following three stages,the discrete differential operators in classical computing are converted into unitary evolutions to satisfy the postulate in quantum systems.The related arithmetic calculations in quantum amplitudes are also realized to sum up the increments from these stages.The proposed quantum algorithm is implemented within the open-source quantum computing framework Qiskit[2].By simulating one-dimensional transient problems,including the Helmholtz equation,the Burgers’equation,and Navier-Stokes equations,we demonstrate the capability of quantum computers in fluid dynamics.展开更多
基金the financial support for this work provided by the National Key R&D Program of China‘Technologies and Integrated Application of Magnesite Waste Utilization for High-Valued Chemicals and Materials’(2020YFC1909303)。
文摘This study developed a numerical model to efficiently treat solid waste magnesium nitrate hydrate through multi-step chemical reactions.The model simulates two-phase flow,heat,and mass transfer processes in a pyrolysis furnace to improve the decomposition rate of magnesium nitrate.The performance of multi-nozzle and single-nozzle injection methods was evaluated,and the effects of primary and secondary nozzle flow ratios,velocity ratios,and secondary nozzle inclination angles on the decomposition rate were investigated.Results indicate that multi-nozzle injection has a higher conversion efficiency and decomposition rate than single-nozzle injection,with a 10.3%higher conversion rate under the design parameters.The decomposition rate is primarily dependent on the average residence time of particles,which can be increased by decreasing flow rate and velocity ratios and increasing the inclination angle of secondary nozzles.The optimal parameters are injection flow ratio of 40%,injection velocity ratio of 0.6,and secondary nozzle inclination of 30°,corresponding to a maximum decomposition rate of 99.33%.
基金National Natural Science Foundation of China(U2004176,22008055)Technology Research Project of Henan Province(232102240034)are gratefully acknowledged.
文摘Liquid phase exfoliation(LPE)process for graphene production is usually carried out in stirred tank reactor and the interactions between the solvent and the graphite particles are important as to improve the production efficiency.In this paper,these interactions were revealed by computational fluid dynamics–discrete element method(CFD-DEM)method.Based on simulation results,both liquid phase flow hydrodynamics and particle motion behavior have been analyzed,which gave the general information of the multiphase flow behavior inside the stirred tank reactor as to graphene production.By calculating the threshold at the beginning of graphite exfoliation process,the shear force from the slip velocity was determined as the active force.These results can support the optimization of the graphene production process.
文摘This paper presents a time-efficient numerical approach to modelling high explosive(HE)blastwave propagation using Computational Fluid Dynamics(CFD).One of the main issues of using conventional CFD modelling in high explosive simulations is the ability to accurately define the initial blastwave properties that arise from the ignition and consequent explosion.Specialised codes often employ Jones-Wilkins-Lee(JWL)or similar equation of state(EOS)to simulate blasts.However,most available CFD codes are limited in terms of EOS modelling.They are restrictive to the Ideal Gas Law(IGL)for compressible flows,which is generally unsuitable for blast simulations.To this end,this paper presents a numerical approach to simulate blastwave propagation for any generic CFD code using the IGL EOS.A new method known as the Input Cavity Method(ICM)is defined where input conditions of the high explosives are given in the form of pressure,velocity and temperature time-history curves.These time history curves are input at a certain distance from the centre of the charge.It is shown that the ICM numerical method can accurately predict over-pressure and impulse time history at measured locations for the incident,reflective and complex multiple reflection scenarios with high numerical accuracy compared to experimental measurements.The ICM is compared to the Pressure Bubble Method(PBM),a common approach to replicating initial conditions for a high explosive in Finite Volume modelling.It is shown that the ICM outperforms the PBM on multiple fronts,such as peak values and overall overpressure curve shape.Finally,the paper also presents the importance of choosing an appropriate solver between the Pressure Based Solver(PBS)and Density-Based Solver(DBS)and provides the advantages and disadvantages of either choice.In general,it is shown that the PBS can resolve and capture the interactions of blastwaves to a higher degree of resolution than the DBS.This is achieved at a much higher computational cost,showing that the DBS is much preferred for quick turnarounds.
基金Funding Statement:This study was supported by National Natural Science Foundation of China(No.81970439)Natural Science Foundation of Shanghai(No.19ZR1432700)+1 种基金Fund of the Shanghai Committee of Science and Technology(Nos.19411965400,17DZ2253100)the Development Fund of Shanghai Talents(No.2020114).
文摘Background:The assessment of renal function is important to the prognosis of patients needing Fontan palliation due to the reconstructed compromised circulation.To know the relationship between the kidney perfusion and hemodynamic characteristics during surgical design could reduce the risk of acute kidney injury(AKI)and the postoperative complications.However,the issue is still unsolved because the current clinical evaluation methods are unable to predict the hemodynamic changes in renal artery(RA).Methods:We reconstructed a three-dimensional(3D)vascular model of a patient requiring Fontan palliation.The technique of computational fluid dynamics(CFD)was utilized to explore the changes of RA hemodynamics under different possible blood flow rates.The relationship between the kidney perfusion and hemodynamic characteristics was investigated.Results:The calculated results indicated the declined tendency of the pressure and pressure drop as the flow rate decreased.When the flow rate decreased to two-thirds of its baseline,both the pressure of left renal artery(LRA)and the pressure of right renal artery(RRA)dipped below 50%,and the pressure of RRA fell more quickly than that of LRA.Uneven distribution of WSS was observed on the trunk of RA,and the lowest WSS was found at the distal of RA.The average WSS in RA dropped to around 50%as the flow rate reached one-third of its baseline.Conclusions:As a promising approach,CFD can be utilized to quantitatively evaluate the hemodynamic characteristics of RA and contribute to offsetting the drawbacks of clinical assessments of renal function,to help realize better prognosis for the patients with Fontan palliation.
文摘Computational fluid dynamics(CFD)provides a powerful tool for investigating complicated fluid flows.This paper aims to study the applicability of CFD in the preliminary design of linear and nonlinear fluid viscous dampers.Two fluid viscous dampers were designed based on CFD models.The first device was a linear viscous damper with straight orifices.The second was a nonlinear viscous damper containing a one-way pressure-responsive valve inside its orifices.Both dampers were detailed based on CFD simulations,and their internal fluid flows were investigated.Full-scale specimens of both dampers were manufactured and tested under dynamic loads.According to the tests results,both dampers demonstrate stable cyclic behaviors,and as expected,the nonlinear damper generally tends to dissipate more energy compared to its linear counterpart.Good compatibility was achieved between the experimentally measured damper force-velocity curves and those estimated from CFD analyses.Using a thermography camera,a rise in temperature of the dampers was measured during the tests.It was found that output force of the manufactured devices was virtually independent of temperature even during long duration loadings.Accordingly,temperature dependence can be ignored in CFD models,because a reliable temperature compensator mechanism was used(or intended to be used)by the damper manufacturer.
文摘The computational fluid dynamics(CFD)technology is analyzed and calculated utilizing the turbulence model and multiphase flow model to explore the performance of internal circulating fluidized beds(ICFB)based on CFD.The three-dimensional simulation method can study the hydrodynamic properties of the ICFB,and the performance of the fluidized bed is optimized.The fluidization performance of the ICFB is improved through the experimental study of the cross-shaped baffle.Then,through the cross-shaped baffle and funnel-shaped baffle placement,the fluidized bed reaches a coupled optimization.The results show that CFD simulation technology can effectively improve the mass transfer efficiency and performance of sewage treatment.The base gap crossshaped baffle can improve the hydraulic conditions of the fluidized bed and reduce the system energy consumption.The cross-shaped baffle and funnel-shaped baffle can perfect the performance of the reactor and effectively strengthen the treatment in the intense aerobic process of industrial sewage.
基金National Natural Science Foundation of China(Grant No.51879159)the National Key Research and Development Program of China(Grant Nos.2019YFB1704200 and 2019YFC0312400)+2 种基金the Chang Jiang Scholars Program(Grant No.T2014099)the Shanghai Excellent Academic Leaders Program(Grant No.17XD1402300)the Innovative Special Project of Numerical Tank of Ministry of Industry and Information Technology of China(Grant No.2016-23/09).
文摘The present paper reviews the recent developments of a high⁃order⁃spectral method(HOS)and the combination with computational fluid dynamics(CFD)method for wave⁃structure interactions.As the numerical simulations of wave⁃structure interaction require efficiency and accuracy,as well as the ability in calculating in open sea states,the HOS method has its strength in both generating extreme waves in open seas and fast convergence in simulations,while computational fluid dynamics(CFD)method has its advantages in simulating violent wave⁃structure interactions.This paper provides the new thoughts for fast and accurate simulations,as well as the future work on innovations in fine fluid field of numerical simulations.
文摘Municipal Solid Waste (MSW) incineration is among the important opportunities to control the pollutions caused by improper dumping and flue gas emissions so as to meet the environmental guidelines. The objective of this study was to design and develop a model for the MSW incineration process. The paper explains the design and development of MSW incinerator involving details of the Computational Fluid Dynamics (CFD) procedures through model design to the post process. CFD model was developed to reveal these features of the incineration process in the MSW incinerator. The model predicts the temperature in combustion chambers as well as at stack outlet of the incinerator. The solid waste characterization was done, and the laboratory analysis shows that, the Higher Heating Value (HHV) of the MSW is 11.65 MJ/kg on dry basis. The elemental composition MSW consists of 54.8%, 5.27%, 34.61%, 2.37% and 0.3% for Carbon, Hydrogen, Oxygen, Nitrogen and Sulphur respectively which are the input parameters for the CFD. The model simulation was positively achieved during combustion process and temperature in combustion chambers ranged between 930 K and 1700 K.
基金sponsored by the Alpha Foundation for the Improvement of Mine Safety and Health, Inc. (Alpha Foundation)
文摘This work proposes a vibrating mesh screen as an alternative to the static mesh screen currently used in conventional flooded-bed dust scrubbers for removing airborne coal mine dust in the continuous mining environment.Fundamental assessments suggest that a vibrating screen may improve the dust collection efficiency of scrubber systems and mitigate the clogging issues associated with the conventional design.To evaluate this hypothesis,computational fluid dynamics(CFD)simulations were carried out to assess the effects of vibration conditions(i.e.,frequency and amplitude)on the dust particle-mesh interaction and mesh wetting conditions,which are the two decisive factors in determining the dust collection efficiency.The results suggest that the vibrating mesh screen can enhance dust particle collision opportunities on the mesh and increase mesh wetted area as compared to the static mesh screen.The effects of mesh screen aperture,coal dust concentration,and spray nozzle flow rate on the performance of the vibrating mesh are also evaluated.Finally,a simplified three-phase flow simulation including airflow,dust particles,and water droplet spray is performed,and the results reflect a significant improvement of dust collection efficiency in the liquid-coated vibrating mesh screen.
基金the support provided by the Iranian Research Organization for Scientific and Technology(IROST)in conducting this research。
文摘Gas release and its dispersion is a major concern in chemical industries.In order to manage and mitigate the risk of gas dispersion and its consequences,it is necessary to predict gas dispersion behavior and its concentration at various locations upon emission.Therefore,models and commercial packages such as Phast and ALOHA have been developed.Computational fluid dynamics(CFD)can be a useful tool to simulate gas dispersion in complex areas and conditions.The validation of the models requires the employment of the experimental data from filed and wind tunnel experiments.It appears that the use of the experimental data to validate the CFD method that only includes certain monitor points and not the entire domain can lead to unreliable results for the intended areas of concern.In this work,some of the trials of the Kit Fox field experiment,which provided a wide-range database for gas dispersion,were simulated by CFD.Various scenarios were considered with different mesh sizes,physical conditions,and types of release.The results of the simulations were surveyed in the whole domain.The data matching each scenario was varied by the influence of the dominant displacement force(wind or diffusivity).Furthermore,the statistical parameters suggested for the heavy gas dispersion showed a dependency on the lower band of gas concentration.Therefore,they should be used with precaution.Finally,the results and computation cost of the simulation could be affected by the chosen scenario,the location of the intended points,and the release type.
文摘Left ventricular assist device( LVAD) in this study is a mechanical tool that is used to support blood flow in the patient with heart disease. It supports left ventricle by building up the pressure to the pump outlet connected to the aorta. This pump was designed based on the magnetic driven centrifugal pump with a unique small washout hole constructed inside the impeller to generate the washout flow passage to prevent the stagnation at the region underneath and around the rotor. Computational fluid dynamics( CFD) was adopted in this study to assess the performance and optimize the design to avoid recirculation and high shear stress which is the main cause of stagnation and blood damage. Transient simulation was used for this study due to the asymmetric design of the washout hole and the complication of the bottom support of the impeller that has a risk of thrombosis,also,it was used to predict the variation of hydraulic performance caused by the rotation of the impeller and pulsed flow at the pump inlet. The simulation results show no excessive stress and no recirculation observed within the computational domain; in addition,the research result also provides information for further optimization and development to the pump.
文摘The present study aims at improving the accuracy of weather forecast by providing useful information on the behavior and response of a sounding temperature sensor.A hybrid approach relying on Computational Fluid Dynamics and a genetic algorithm(GA)is used to simulate the system represented by the bead thermistor and the surrounding air.In particular,the influence of different lead angles,sensor lead length,and lead number is considered.The results have shown that when the length of the lead wire of the bead thermistor is increased,the radiation temperature rise is reduced;when the number of lead wire is four and the angle between the lead wires is 180°,the solar radiation angle has a scarce influence on the radiation temperature rise of the sounding temperature sensor.
文摘To solve the problem of temperature rise caused by the high power density of high-speed permanent magnet synchronous traction motors,the temperature rise of various components in the motor is analyzed by coupling the equivalent thermal circuit method and computational fluid dynamics.Also,a cooling strategy is proposed to solve the problem of temperature rise,which is expected to prolong the service life of these devices.First,the theoretical bases of the approaches used to study heat transfer and fluid mechanics are discussed,then the fluid flow for the considered motor is analyzed,and the equivalent thermal circuit method is introduced for the calculation of the temperature rise.Finally,the stator,rotor loss,motor temperature rise,and the proposed cooling method are also explored through experiments.According to the results,the stator temperature at 50,000 r/min and 60,000 r/min at no-load operation is 68℃ and 76℃,respectively.By monitoring the temperature of the air outlets inside and outside the motor at different speeds,it is also found that the motor reaches a stable temperature rise after 65 min of operation.Coupling of the thermal circuit method and computational fluid dynamics is a strategy that can provide the average temperature rise of each component and can also comprehensively calculate the temperature of each local point.We conclude that a hybrid cooling strategy based on axial air cooling of the inner air duct of the motor and water cooling of the stator can meet the design requirements for the ventilation and cooling of this type of motors.
文摘An efficient and versatile intelligent algorithm is developed for the control of the cabin environment of wind power generators.The method can be used to monitor and solve wind power generation problems at the same time.It also provides several advantages with respect to other traditional methods which imply significant workload and maintenance personnel.The functional requirements of the intelligent control system are analyzed,and a control algorithm for the stepping motor is selected and evaluated.Through the comparative analysis of the active power and internal temperature curve for three kinds of output power of the prototype,it is proved that the environmental intelligent control system greatly improves the operation efficiency,solves typical problems in the ventilator room environment,and provides a solid theoretical basis for further research in this field.
基金by the National Natural Science Foundation of China(51808201).
文摘On the basis of harmonic mapping theory,a mobile grid technology is applied to computational fluid dynamics(CFD).Starting from the observation that standard fixed-grid techniques often fail in addressing problems with large deformations,we elaborate a new algorithm relying on the software COMSOL Multiphysics 5.3a to solve the coupling of the mobile grid equation and the governing differential equations for fluid flow.The motion of water in a water tank when the tank waggles is simulated.We demonstrate that this technology can be implemented without a significant increase in the computational cost with respect to standard numerical methods.
文摘River bank erosion models are an important prerequisite for understanding the development of river meanders and for estimating likely land-loss and potential danger to floodplain infrastructure. Although bank erosion models have been developed that consider large-scale mass failure, the contribution of fluvial erosion (the process of particle-by-particle erosion due to the shearing action of the river flow) to bank retreat has not received as much consideration. In principle, such fluvial bank erosion rates can be quantified using excess shear stress formulations, but in practice, it has proven difficult to estimate the parameters involved. In this study, a series of three-dimensional Computational Fluid Dynamics (CFD) simulations for a meander loop on the River Asker (200 m long) at Bridport in southern England were undertaken to elucidate the overall flow structures and in particular to provide estimates of the applied fluid shear stress exerted on the riverbanks. The CFD models, which simulated relatively low and relatively high flow conditions, were established using Fluent 6.2 software. The modelling outcomes show that the key qualitative features of the flow endure even as flow discharge varies. At bank full, the degrees of velocity and simulated shear stresses within the inner bank separation zones are shown to be higher than those observed under low flow conditions, and that these elevated shear stresses may be sufficient to result in the removal of accumulated sediments into the main downstream flow.
文摘The principal objective of this work was to investigate the 3D flow field around a multi-bladed horizontal axis wind turbine (HAWT) rotor and to investigate its performance characteristics. The aerodynamic performance of this novel rotor design was evaluated by means of a Computational Fluid Dynamics commercial package. The Reynolds Averaged Navier-Stokes (RANS) equations were selected to model the physics of the incompressible Newtonian fluid around the blades. The Shear Stress Transport (SST) <em>k</em>-<em>ω</em> turbulence model was chosen for the assessment of the 3D flow behavior as it had widely used in other HAWT studies. The pressure-based simulation was done on a model representing one-ninth of the rotor using a 40-degree periodicity in a single moving reference frame system. Analyzing the wake flow behavior over a wide range of wind speeds provided a clear vision of this novel rotor configuration. From the analysis, it was determined that the flow becomes accelerated in outer wake region downstream of the rotor and by placing a multi-bladed rotor with a larger diameter behind the forward rotor resulted in an acceleration of this wake flow which resulted in an increase the overall power output of the wind machine.
文摘Dynamic simulation of a double-skin façade(DSF)with computational fluid dynamics(CFD)can be challenging due to the lack of validated models and benchmarking datasets.Furthermore,there is a lack of consensus in the scientific community on what constitutes a successfully validated DSF model.The present review study identifies simulation trends and research gaps for DSFs simulated with CFD.Additionally,this article presents a series of CFD simulations in which key aspects of the DSF modelling are varied:2D or 3D modelling approaches,turbulence viscosity models(TVMs),radiation models,and wall function.These simulation results are compared to the empirical data(both temperature and velocity fields)of a benchmark test with laboratory-controlled boundary conditions.This analysis shows that using the k-εRNG model with enhanced wall treatment and surface-to-surface(S2S)radiation model yields the best results for the 2D case of natural convection flow.Moreover,it is shown that accounting for the velocity field in the validation process is essential to ensure the suitability of a model.Finally,the authors advocate for the use of selected dimensionless numbers to improve the comparability of the different DSF scientific studies.This would also help to identify relevant experimental datasets for validation and suitable CFD simulation settings for specific DSF cases.
基金supported by a General Research Fund(grant number 17202719)provided by the Research Grants Council of Hong Kong.
文摘During the coronavirus disease 2019 pandemic,short-range virus transmission has been observed to have a higher risk of causing infection than long-range virus transmission.However,the roles played by the inhalation and large droplet routes cannot be distinguished in practice.A recent analytical study revealed the predominance of short-range inhalation over the large droplet spray route as causes of respiratory infections.In the current study,short-range exposure was analyzed via computational fluid dynamics(CFD)simulations using a discrete phase model.Detailed facial membranes,including eyes,nostrils,and a mouth,were considered.In CFD simulations,there is no need for a spherical approximation of the human head for estimating deposition nor the“anisokinetic aerosol sampling”approximation for estimating inhalation in the analytical model.We considered two scenarios(with two spheres[Scenario 1]and two human manikins[Scenario 2]),source-target distances of 0.2 to 2 m,and droplet diameters of 3 to 1,500μm.The overall CFD exposure results agree well with data previously obtained from a simple analytical model.The CFD results confirm the predominance of the short-range inhalation route beyond 0.2 m for expiratory droplets smaller than 50μm during talking and coughing.A critical droplet size of 87.5μm was found to differentiate droplet behaviors.The number of droplets deposited on the target head exceeded those exposed to facial membranes,which implies a risk of exposure through the immediate surface route over a short range.
基金NSFC Basic Science Center Program for”Multiscale Problems in Nonlinear Mechanics”(Grant No.11988102)National Natural Science Foundation of China(Grant No.12202454).
文摘We present quantum numerical methods for the typical initial boundary value problems(IBVPs)of convection-diffusion equations in fluid dynamics.The IBVP is discretized into a series of linear systems via finite difference methods and explicit time marching schemes.To solve these discrete systems in quantum computers,we design a series of quantum circuits,including four stages of encoding,amplification,adding source terms,and incorporating boundary conditions.In the encoding stage,the initial condition is encoded in the amplitudes of quantum registers as a state vector to take advantage of quantum algorithms in space complexity.In the following three stages,the discrete differential operators in classical computing are converted into unitary evolutions to satisfy the postulate in quantum systems.The related arithmetic calculations in quantum amplitudes are also realized to sum up the increments from these stages.The proposed quantum algorithm is implemented within the open-source quantum computing framework Qiskit[2].By simulating one-dimensional transient problems,including the Helmholtz equation,the Burgers’equation,and Navier-Stokes equations,we demonstrate the capability of quantum computers in fluid dynamics.
