Electrocatalysis enables the industrial transition to sustainable production of chemicals using abundant precursors and electricity from renewable sources.De-centralized production of hydrogen peroxide(H_(2)O_(2))from...Electrocatalysis enables the industrial transition to sustainable production of chemicals using abundant precursors and electricity from renewable sources.De-centralized production of hydrogen peroxide(H_(2)O_(2))from water and oxygen of air is highly desirable for daily life and industry.We report an effective electrochemical refinery(e-refinery)for H_(2)O_(2)by means of electrocatalysis-controlled comproportionation reaction(2_(H)O+o→2HO),feeding pure water and oxygen only.Mesoporous nickel(Ⅱ)oxide(NiO)was used as electrocatalyst for oxygen evolution reaction(OER),producing oxygen at the anode.Conducting polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)drove the oxygen reduction reaction(ORR),forming H_(2)O_(2)on the cathode.The reactions were evaluated in both half-cell and device configurations.The performance of the H_(2)O_(2)e-refinery,assembled on anion-exchange solid electrolyte and fed with pure water,was limited by the unbalanced ionic transport.Optimization of the operation conditions allowed a conversion efficiency of 80%.展开更多
Lithium-sulfur(Li-S)batteries have attracted increased interest because of the high theoretical energy density,low cost,and environmental friendliness.Conducting polymers(CPs),as one of the most promising materials us...Lithium-sulfur(Li-S)batteries have attracted increased interest because of the high theoretical energy density,low cost,and environmental friendliness.Conducting polymers(CPs),as one of the most promising materials used in Li-S batteries,can not only facilitate electron transfer and buffer the large volumetric change of sulfur benefiting from their porous structure and excellent flexibility,but also enable stronger physical/chemical adsorption capacity toward polysulfides(LiPSs)when doped with abundant heteroatoms to promote the sulfur redox kinetics and achieve the high sulfur loading.This review firstly introduces the properties of various CPs including structural CPs(polypyrrole(PPy),polyaniline(PANi),polyethylene dioxothiophene[PEDOT])and compound CPs(polyethylene oxide(PEO),polyvinyl alcohol(PVA)and poly(acrylic acid)[PAA]),and their application potential in Li-S batteries.Furthermore,the research progress of various CPs in different components(cathode,separator,and interlayer)of Li-S batteries is systematically summarized.Finally,the application perspective of the CPs in Li-S batteries as a potential guidance is comprehensively discussed.展开更多
Lithium-sulfur(Li-S) batteries and lithium-selenium(Li-Se) batteries,as environmental protection energy storage systems with outstanding theoretical specific capacities and high energy densities,have become the hotspo...Lithium-sulfur(Li-S) batteries and lithium-selenium(Li-Se) batteries,as environmental protection energy storage systems with outstanding theoretical specific capacities and high energy densities,have become the hotspots of current researches.Besides,elemental S(Se) raw materials are widely sourced and their production costs are both low,which make them considered one of the new generations of high energy density electrochemical energy storage systems with the most potential for development.However,poor conductivity of elemental S/Se and the notorious "shuttle effect" of lithium polysulfides(polyselenides) severely hinder the commercialization of Li-S/Se batteries.Thanks to the excellent electrical conductivity and strong absorption of lithium polysulfide(polyselenide) about electronically conducting polymer,some of the above thorny problems have been effectively alleviated.The review presents the fundamental studies and current development trends of common electronically conducting polymers in various components of Li-S/Se batteries,which involves polyaniline(PANI) polypyrrole(PPy),and polythiophene(PTh) with its derivatives,e.g.polyethoxythiophene(PEDOT) and poly(3,4-ethylene dioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS).Finally,the review not only summarizes the research directions and challenges facing the application of electronically conducting polymers,but also looks forward to the development prospects of them,which will provide a way for the practical use of electronically conducting polymers in Li-S/Se batteries with outstanding electrochemical properties in the short run.展开更多
We report an electrodeposited poly(pyrrole-co-pyrrolepropylic acid) copolymer modified electroactive graphene-carbon nanotubes composite deposited on a glassy carbon electrode to detect the protein antigen(cTnI). The ...We report an electrodeposited poly(pyrrole-co-pyrrolepropylic acid) copolymer modified electroactive graphene-carbon nanotubes composite deposited on a glassy carbon electrode to detect the protein antigen(cTnI). The copolymer provides pendant carboxyl groups for the site-specific covalent immobilization of protein antibody, antitroponin I. The hybrid nanocomposite was used as a transducer for biointerfacial impedance sensing for cTnI detection.The results show that the hybrid exhibits a pseudo capacitive behaviour with a maximum phase angle of 49° near 1 Hz,which is due to the inhomogeneous and porous structure of the hybrid composition. The constant phase element of copolymer is 0.61(n = 0.61), whereas, it is 0.88(n = 0.88) for the hybrid composites, indicating a comparatively homogeneous microstructure after biomolecular functionalization. The transducer shows a linear change in charge transfer characteristic(R_(et)) on cTnI immunoreaction for spiked human serum in the concentration range of 1.0 pg mL^(-1)–10.0 ng mL^(-1). The sensitivity of the transducer is 167.8 ± 14.2 Ω cm^2 per decade, and it also exhibits high specificity and good reproducibility.展开更多
We report chemical vapor phase polymerization(VPP) deposition of poly(3,4-ethylenedioxythiophene)(PEDOT) and PEDOT/graphene on porous dielectric tantalum pentoxide(Ta_2O_5) surface as cathode films for solid tantalum ...We report chemical vapor phase polymerization(VPP) deposition of poly(3,4-ethylenedioxythiophene)(PEDOT) and PEDOT/graphene on porous dielectric tantalum pentoxide(Ta_2O_5) surface as cathode films for solid tantalum electrolyte capacitors. The modified oxidant/oxidant-graphene films were first deposited on Ta_2O_5 by dip-coating, and VPP process was subsequently utilized to transfer oxidant/oxidant-graphene into PEDOT/PEDOT-graphene films. The SEM images showed PEDOT/PEDOT-graphene films was successfully constructed on porous Ta_2O_5 surface through VPP deposition, and a solid tantalum electrolyte capacitor with conducting polymer-graphene nano-composites as cathode films was constructed. The high conductivity nature of PEDOT-graphene leads to resistance decrease of cathode films and lower contact resistance between PEDOT/graphene and carbon paste. This nano-composite cathode films based capacitor showed ultralow equivalent series resistance(ESR) ca. 12 m? and exhibited excellent capacitance-frequency performance, which can keep 82% of initial capacitance at 500 KHz. The investigation on leakage current revealed that the device encapsulation process has no influence on capacitor leakage current, indicating the excellent mechanical strength of PEDOT/PEDOT-gaphene films. This high conductivity and mechanical strength of graphene-based polymer films shows promising future for electrode materials such as capacitors, organic solar cells and electrochemical energy storage devices.展开更多
We report the current-voltage （I-V） characteristics of individual polypyrrole nanotubes and poly（3,4- ethylenedioxythiophene） （PEDOT） nanowires in a temperature range from 300 K to 2 K. Considering the complex s...We report the current-voltage （I-V） characteristics of individual polypyrrole nanotubes and poly（3,4- ethylenedioxythiophene） （PEDOT） nanowires in a temperature range from 300 K to 2 K. Considering the complex structures of such quasi-one-dimensional systems with an array of ordered conductive regions separated by disordered barriers, we use the extended fluctuation-induced tunneling （FIT） and thermal excitation model （Kaiser expression） to fit the temperature and electric-field dependent I-V curves. It is found that the I-V data measured at higher temperatures or higher voltages can be well fitted by the Kaiser expression. However, the low-temperature data around the zero bias clearly deviate from those obtained from this model. The deviation （or zero-bias conductance suppression） could be possibly ascribed to the occurrence of the Coulomb-gap in the density of states near the Femi level and/or the enhancement of electron-electron interaction resulting from nanosize effects, which have been revealed in the previous studies on low-temperature electronic transport in conducting polymer films, pellets and nanostructures. In addition, similar I--V characteristics and deviation are also observed in an isolated K0.27MnO2 nanowire.展开更多
A physical model of series of the conductivity on chain and the interchain conductivitybetween chains is proposed to explain enhanced conductivity of stretched conducting polymers.This model suggests that the enhanced...A physical model of series of the conductivity on chain and the interchain conductivitybetween chains is proposed to explain enhanced conductivity of stretched conducting polymers.This model suggests that the enhanced conductivity for stretched conducting polymers might bedue to increasing of the interchain conductivity between chains along the elongation direction afterdrawing processes if the conductivity on chain is assumed much larger than that of the interchainconductivity between chains. According to this model, it is expected that the temperaturedependence of conductivity measured by four-probe method for stretched conducting polymers iscontrolled by a variation of the interchain conductivity between chains with temperature, whichcan be used to explain that a metallic temperature dependence of conductivity for stretchedconducting polymers is not observed although the conductivity along the elongation direction isenhanced by two or three orders of magnitude.展开更多
The infrared emissivity of conducting polymers in 8—20μm and at 50—150℃ in the direction of normal line has been measured as a function of wavelength, conductivity at room temperature, counterion, doping levels, m...The infrared emissivity of conducting polymers in 8—20μm and at 50—150℃ in the direction of normal line has been measured as a function of wavelength, conductivity at room temperature, counterion, doping levels, measuring temperature and thickness of sample.展开更多
A pure conducting polymer （PANI-CSA） film conditioned by an electric discharge was tentatively utilized as an cathode for emitting electrons under electric fields. The emission of electrons was observed using a phos...A pure conducting polymer （PANI-CSA） film conditioned by an electric discharge was tentatively utilized as an cathode for emitting electrons under electric fields. The emission of electrons was observed using a phosphor （ZnO：Zn） screen excited by electrons from the conditioned film. The film morphology was investigated using a scanning electron microscope and it was found that undulate whisker-like sites formed on the surface. The emission was presumably due to the undulate whisker-like sites. The field enhancement factor was estimated to be as high as 1150. The electron emitting process of the PANI-CSA film conditioned by electric discharge was also discussed.展开更多
Conducting polymers sensors have been very interesting that it can detect wide variety of functionalities,however these materials have to solve humidity contaminant,poor reversibility and selectivity.To improve this p...Conducting polymers sensors have been very interesting that it can detect wide variety of functionalities,however these materials have to solve humidity contaminant,poor reversibility and selectivity.To improve this problems,we investigated pretreatment such as soaking in methanol and thermal treatment in N_2.This process improved stability, reversibility and response time and recovery time.To overcome humidity contaminant coated hydrophobic polymer was reduced above 50% at RH10%.For sensor array structure was fabricated for enhancing selectivity of gas vapor.Conducting polymer sensor array had several application in environmental and medical science the method of principal component analysis.展开更多
The electrochemical preparation of polypyrrole-carboxymethylcellulose （PPY-CMC） conducting polymer composite films on indium tin oxide （ITO） glass electrode from an aqueous solution containing pyrrole monomer, pto...The electrochemical preparation of polypyrrole-carboxymethylcellulose （PPY-CMC） conducting polymer composite films on indium tin oxide （ITO） glass electrode from an aqueous solution containing pyrrole monomer, ptoluenesulfonate electrolyte and carboxymethylcellulose insulating polymer is reported. The characterization by Fourier transform infrared spectroscopy （FT-IR） shows that carboxymethylcellulose （CMC） has been successfully incorporated into polypyrrole structure forming PPY-CMC polymer composite films. The conductivity of the prepared composite films was found to increase with increaseing CMC concentration in pyrrole solution, The optical microscopic results show the influence of CMC concentration in the pyrrole solution over the morphological changes of the prepared films. The dynamic mechanical analysis （DMA） on the prepared PPY-CMC film reveals the higher plastic property of the PPY-CMC composite film.展开更多
This paper reports that the Schottky junctions between low work function metals （e.g. Al and In） and doped semiconducting polymer pellets （e.g. polyaniline （PANI） microsphere pellet and polypyrrole （PPy） nanotu...This paper reports that the Schottky junctions between low work function metals （e.g. Al and In） and doped semiconducting polymer pellets （e.g. polyaniline （PANI） microsphere pellet and polypyrrole （PPy） nanotube pellet） have been prepared and studied. Since Ag is a high work function metal which can make an ohmic contact with polymer, silver paste was used to fabricate the electrodes. The Al/PANI/Ag heterojunction shows an obvious rectifying effect as shown in I - V characteristic curves （rectifying ratio γ = 5 at ±6 V bias at room temperature）. As compared to the Al/PANI/Ag, the heterojunction between In and PANI （In/PANI/Ag） exhibits a lower rectifying ratio γ= 1.6 at ±2 V bias at room temperature. In addition, rectifying effect was also observed in the heterojunctions Al/PPy/Ag （γ = 3.2 at ±1.6 V bias） and In/PPy/Ag （γ = 1.2 at ±3.0 V bias）. The results were discussed in terms of thermoionic emission theory.展开更多
Method of VSC (Voltage Shorted Compaction)can be used to determine the intrinsic temperature dependence ofconductivity ofpolycrystalline compaction. The experimental conditions and technical key for preparation of VSC...Method of VSC (Voltage Shorted Compaction)can be used to determine the intrinsic temperature dependence ofconductivity ofpolycrystalline compaction. The experimental conditions and technical key for preparation of VSC device and its physical model as well as its applications in conducting polymers are discussed in detail.展开更多
Conducting polymers(CPs)have long been studied as cathode materials for lithium-ion batteries,but the low doping level(maximum:30–50%or even lower)and poor cycling stability limit their applications.Herein,we have de...Conducting polymers(CPs)have long been studied as cathode materials for lithium-ion batteries,but the low doping level(maximum:30–50%or even lower)and poor cycling stability limit their applications.Herein,we have developed a method of nanoporeconfined in situ electropolymerization to prepare nanostructured polythiophene-type porous cathodes,achieving significantly improved doping availability and long cycle life.It was verified that the nanosized polymer formed in situ and loose porous structure are conducive to the doping reaction and maintain high electrochemical stability.The constructed thieno[3,2-b]thiophene(TtTP)/active carbon cathode delivers an ultrahigh reversible capacity of 309.2 mAh g^(−1)(doping level up to 80.9%)along with an ultrahigh energy density of 1252.3 Wh Kg^(−1),and an ultrahigh rate capability(172.4 mAh g^(−1) at 30 A g^(−1)),which far exceed all the CPs and even all the p-type organic cathode materials reported.Moreover,an excellent long cycle life of 2000 cycles at 5 A g^(−1) is also revealed,which is a new record for CPs-based cathode materials in nonaqueous lithium-ion batteries.Our method provides an effective strategy to improve the doping level and cycling stability of CP-based cathode materials.展开更多
Conducting polymers(CPs),including poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS),are promising coating materials for neural electrodes.However,the weak adhesion of CP coatings to substrates such a...Conducting polymers(CPs),including poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS),are promising coating materials for neural electrodes.However,the weak adhesion of CP coatings to substrates such as platinum-iridium is a significant challenge that limits their practical application.To address this issue,we used femtosecond laser-prepared hierarchical structures on platinum-iridium(Pt-Ir)substrates to enhance the adhesion of PEDOT:PSS coatings.Next,we used cyclic voltammetry(CV)stress and accelerated aging tests to evaluate the stability of both drop cast and electrodeposited PEDOT:PSS coatings on Pt-Ir substrates,both with and without hierarchical structures.Our results showed that after 2000 CV cycles or five weeks of aging at 60℃,the morphology and electrochemical properties of the coatings on the Pt-Ir substrates with hierarchical structures remained relatively stable.In contrast,we found that smooth Pt-Ir substrate surfaces caused delamination of the PEDOT:PSS coating and exhibited both decreased charge storage capacity and increased impedance.Overall,enhancing the stability of PEDOT:PSS coatings used on common platinum-iridium neural electrodes offers great potential for improving their electrochemical performance and developing new functionalities.展开更多
There is a great interest in developing microelectronic devices based on nanostructured conducting polymers that can selectively electro-couple analytes at high sensitivity and low power.Nanostructured conducting poly...There is a great interest in developing microelectronic devices based on nanostructured conducting polymers that can selectively electro-couple analytes at high sensitivity and low power.Nanostructured conducting polymers have emerged as promising candidates for this technology due to their excellent stability with low redox potential,high conductivity,and selectivity endowed by chemical functionalization.However,it remains challenging to develop cost-effective and large-scale assembly approaches for functionalized conducting polymers in the practical fabrication of electronic devices.Here,we reported a straightforward waferscale assembly of nanostructured hexafluoroisopropanol functionalized poly(3,4-ethylenedioxythiophene)(PEDOT-HFIP)on smooth substrates.This approach is template-free,solution-processed,and adaptable to conductive and nonconductive substrates.By this approach,the nanostructured PEDOT-HFIPs could be easily integrated onto interdigitated electrodes with intimate ohmic contact.At the optimized space-to-volume ratio,we demonstrated a low-power,sensitive,and selective nerve agent sensing technology using this platform by detecting sarin vapor with a limit of detection(LOD)of 10 ppb and signal strength of 400 times the water interference at the same concentration,offering significant advantages over existing similar technologies.We envision that its easy scale-up,micro size,small power consumption,and combination of high sensitivity and selectivity make it attractive for various wearable platforms.展开更多
Conducting polymers offer attractive mixed ionic-electronic conductivity,tunable interfacial barrier with metal,tissue matchable softness,and versatile chemical functionalization,making them robust to bridge the gap b...Conducting polymers offer attractive mixed ionic-electronic conductivity,tunable interfacial barrier with metal,tissue matchable softness,and versatile chemical functionalization,making them robust to bridge the gap between brain tissue and electronic circuits.This review focuses on chemically revised conducting polymers,combined with their superior and controllable electrochemical performance,to fabricate long-term bioelectronic implants,addressing chronic immune responses,weak neuron attraction,and long-term electrocommunication instability challenges.Moreover,the promising progress of zwitterionic conducting polymers in bioelectronic implants(≥4 weeks stable implantation)is highlighted,followed by a comment on their current evolution toward selective neural coupling and reimplantable function.Finally,a critical forward look at the future of zwitterionic conducting polymers for in vivo bioelectronic devices is provided.展开更多
Electrochemistry with antifouling sensing interfaces that effectively resist the adsorption of nonspecific biomolecules provides a powerful mean for the accurate and sensitive detection of disease biomarkers tive dete...Electrochemistry with antifouling sensing interfaces that effectively resist the adsorption of nonspecific biomolecules provides a powerful mean for the accurate and sensitive detection of disease biomarkers tive dete in complex biofluids.However.there are few strategies to acquire a stable and solid antifouling coat-ing on any substrate by a simple way.Herein,a simple one-step assembly methød has been adopted to construct phase-transited bovine serum albumin(PTB)antifouling Layers.Prior to construction of the an-tifouling layers.the poly(3,4-ethylenedioxythiophene)(PEDOT)doped with 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide(ionic liquid,IL)were firstly electrodeposited on bare electrodes,en-dowing good conductiviry and catalytic capability for the developed sensor.Subsequently.with the assist of tris(2-carboxyethyl)phosphine(TCEP)the disulfide bonds of bovine serum albumin(BSA)were re-Im alb duced to form PTB,which can be coated on the PEDOT-It modified electrode to construct an antifouling electrochemical senor(PTB/PEDOT-ILCCE)for the detection of uric acid(UA)in human serum.The UA sensor demonstrated a good linear range from 1.11 umol/L to 798.9 umol/L with a high sensltivity of0,556 jA umolL^(-1)cm^(-2).The combination of conducting polymers with one-step assembly of PTB offers a universal and rellable method før the modification of various electrodes to determine target molecules in complex human body fluids.展开更多
Solution-processed conducting polymers(CPs)are emerging as promising multifunctional materials and are motivating the development of several electronic applications.However,there are fewer highperformance electron con...Solution-processed conducting polymers(CPs)are emerging as promising multifunctional materials and are motivating the development of several electronic applications.However,there are fewer highperformance electron conduction-dominated n-type CPs than p-types.Thus,the exploration of other material designs and synthesis methods is required.Accordingly,we developed a facile metal catalystfree method by combining polymerization and in situ n-doping to produce an n-type conducting polymer,poly(benzodithiophenedione)(PBTDO).The doping procedure enabled interaction between the charged conjugated backbones and solvent,dimethyl sulfoxide,making the doped conducting polymer soluble without the assistance of side chains or surfactants.PBTDO exhibited an extremely low-lying reduction level,moderate conductivity,and good air stability with potential applications in n-type organic thermoelectric devices.Moreover,it was found that the in situ doping efficiency in the reaction was highly dependent on the energy level and backbone planarity.Doping cannot occur for polymers with a high lowest unoccupied molecular orbital level and distorted conjugated chains prevent a high doping efficiency from being obtained.This study gains deeper insight into the n-doping mechanisms of conjugated polymers,with guidance for the design of highperformance n-type CPs.展开更多
基金the competence centre Fun Mat-II funded by the Swedish Agency for Innovation Systems(Vinnova,grant no 2016-05156)Swedish Energy Agency(project no 42022-1)+3 种基金Swedish Research Council(VR 2021-04427,VR 2019-05577,VR 2016–05990)the Centre in Nanoscience and Technology(CeNano,Linkoping Institute of Technology(LiTH),Linkoping University,2020,2021)the Swedish Government Strategic Research Area in Materials Science on Advanced Functional Materials at Linkoping University(Faculty Grant SFO-Mat-Li U No.2009-00971)the Knut and Alice Wal enberg Foundation(H2O2,KAW 2018.0058),for support
文摘Electrocatalysis enables the industrial transition to sustainable production of chemicals using abundant precursors and electricity from renewable sources.De-centralized production of hydrogen peroxide(H_(2)O_(2))from water and oxygen of air is highly desirable for daily life and industry.We report an effective electrochemical refinery(e-refinery)for H_(2)O_(2)by means of electrocatalysis-controlled comproportionation reaction(2_(H)O+o→2HO),feeding pure water and oxygen only.Mesoporous nickel(Ⅱ)oxide(NiO)was used as electrocatalyst for oxygen evolution reaction(OER),producing oxygen at the anode.Conducting polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)drove the oxygen reduction reaction(ORR),forming H_(2)O_(2)on the cathode.The reactions were evaluated in both half-cell and device configurations.The performance of the H_(2)O_(2)e-refinery,assembled on anion-exchange solid electrolyte and fed with pure water,was limited by the unbalanced ionic transport.Optimization of the operation conditions allowed a conversion efficiency of 80%.
基金supported by the National Natural Science Foundation of China(51978569 and 52172097)Key Research and Development Program of Shaanxi Province(2022GY-301)+4 种基金Basic and Public Projects of Zhejiang Province(LGF21E020001)China Postdoctoral Science Foundation(2020 M683467)Basic Research Operating Expenses of XJTU(xzy022022041)China Scholarship Council foundation(201906285020 and 202206280212)support from Faraday Institution LiSTAR Programme(EP/S003053/1,Grant FIRG014).
文摘Lithium-sulfur(Li-S)batteries have attracted increased interest because of the high theoretical energy density,low cost,and environmental friendliness.Conducting polymers(CPs),as one of the most promising materials used in Li-S batteries,can not only facilitate electron transfer and buffer the large volumetric change of sulfur benefiting from their porous structure and excellent flexibility,but also enable stronger physical/chemical adsorption capacity toward polysulfides(LiPSs)when doped with abundant heteroatoms to promote the sulfur redox kinetics and achieve the high sulfur loading.This review firstly introduces the properties of various CPs including structural CPs(polypyrrole(PPy),polyaniline(PANi),polyethylene dioxothiophene[PEDOT])and compound CPs(polyethylene oxide(PEO),polyvinyl alcohol(PVA)and poly(acrylic acid)[PAA]),and their application potential in Li-S batteries.Furthermore,the research progress of various CPs in different components(cathode,separator,and interlayer)of Li-S batteries is systematically summarized.Finally,the application perspective of the CPs in Li-S batteries as a potential guidance is comprehensively discussed.
基金the National Natural Science Foundation of China(51973157)the Special Grade of the Financial Support from the China Postdoctoral Science Foundation(2020T130469)+1 种基金the China Postdoctoral Science Foundation Grant(2019 M651047)the Science and Technology Plans of Tianjin(19PTSYJC00010)for their financial support。
文摘Lithium-sulfur(Li-S) batteries and lithium-selenium(Li-Se) batteries,as environmental protection energy storage systems with outstanding theoretical specific capacities and high energy densities,have become the hotspots of current researches.Besides,elemental S(Se) raw materials are widely sourced and their production costs are both low,which make them considered one of the new generations of high energy density electrochemical energy storage systems with the most potential for development.However,poor conductivity of elemental S/Se and the notorious "shuttle effect" of lithium polysulfides(polyselenides) severely hinder the commercialization of Li-S/Se batteries.Thanks to the excellent electrical conductivity and strong absorption of lithium polysulfide(polyselenide) about electronically conducting polymer,some of the above thorny problems have been effectively alleviated.The review presents the fundamental studies and current development trends of common electronically conducting polymers in various components of Li-S/Se batteries,which involves polyaniline(PANI) polypyrrole(PPy),and polythiophene(PTh) with its derivatives,e.g.polyethoxythiophene(PEDOT) and poly(3,4-ethylene dioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS).Finally,the review not only summarizes the research directions and challenges facing the application of electronically conducting polymers,but also looks forward to the development prospects of them,which will provide a way for the practical use of electronically conducting polymers in Li-S/Se batteries with outstanding electrochemical properties in the short run.
文摘We report an electrodeposited poly(pyrrole-co-pyrrolepropylic acid) copolymer modified electroactive graphene-carbon nanotubes composite deposited on a glassy carbon electrode to detect the protein antigen(cTnI). The copolymer provides pendant carboxyl groups for the site-specific covalent immobilization of protein antibody, antitroponin I. The hybrid nanocomposite was used as a transducer for biointerfacial impedance sensing for cTnI detection.The results show that the hybrid exhibits a pseudo capacitive behaviour with a maximum phase angle of 49° near 1 Hz,which is due to the inhomogeneous and porous structure of the hybrid composition. The constant phase element of copolymer is 0.61(n = 0.61), whereas, it is 0.88(n = 0.88) for the hybrid composites, indicating a comparatively homogeneous microstructure after biomolecular functionalization. The transducer shows a linear change in charge transfer characteristic(R_(et)) on cTnI immunoreaction for spiked human serum in the concentration range of 1.0 pg mL^(-1)–10.0 ng mL^(-1). The sensitivity of the transducer is 167.8 ± 14.2 Ω cm^2 per decade, and it also exhibits high specificity and good reproducibility.
基金supported by the National Science Foundation of China(NSFC)(No.61101029)the Fundamental Research Funds for the Central Universities(No.ZYGX2010J057)+1 种基金the national defense pre-research foundation(No.9140A23070111DZ02042)A Plan for Supporting the New Century Talents(No.NCET-12-0091)
文摘We report chemical vapor phase polymerization(VPP) deposition of poly(3,4-ethylenedioxythiophene)(PEDOT) and PEDOT/graphene on porous dielectric tantalum pentoxide(Ta_2O_5) surface as cathode films for solid tantalum electrolyte capacitors. The modified oxidant/oxidant-graphene films were first deposited on Ta_2O_5 by dip-coating, and VPP process was subsequently utilized to transfer oxidant/oxidant-graphene into PEDOT/PEDOT-graphene films. The SEM images showed PEDOT/PEDOT-graphene films was successfully constructed on porous Ta_2O_5 surface through VPP deposition, and a solid tantalum electrolyte capacitor with conducting polymer-graphene nano-composites as cathode films was constructed. The high conductivity nature of PEDOT-graphene leads to resistance decrease of cathode films and lower contact resistance between PEDOT/graphene and carbon paste. This nano-composite cathode films based capacitor showed ultralow equivalent series resistance(ESR) ca. 12 m? and exhibited excellent capacitance-frequency performance, which can keep 82% of initial capacitance at 500 KHz. The investigation on leakage current revealed that the device encapsulation process has no influence on capacitor leakage current, indicating the excellent mechanical strength of PEDOT/PEDOT-gaphene films. This high conductivity and mechanical strength of graphene-based polymer films shows promising future for electrode materials such as capacitors, organic solar cells and electrochemical energy storage devices.
基金Project supported by the National Natural Science Foundation of China (Grant No 10604038)the Program for New Century Excellent Talents in University of China (Grant No NCET-07-0472)
文摘We report the current-voltage （I-V） characteristics of individual polypyrrole nanotubes and poly（3,4- ethylenedioxythiophene） （PEDOT） nanowires in a temperature range from 300 K to 2 K. Considering the complex structures of such quasi-one-dimensional systems with an array of ordered conductive regions separated by disordered barriers, we use the extended fluctuation-induced tunneling （FIT） and thermal excitation model （Kaiser expression） to fit the temperature and electric-field dependent I-V curves. It is found that the I-V data measured at higher temperatures or higher voltages can be well fitted by the Kaiser expression. However, the low-temperature data around the zero bias clearly deviate from those obtained from this model. The deviation （or zero-bias conductance suppression） could be possibly ascribed to the occurrence of the Coulomb-gap in the density of states near the Femi level and/or the enhancement of electron-electron interaction resulting from nanosize effects, which have been revealed in the previous studies on low-temperature electronic transport in conducting polymer films, pellets and nanostructures. In addition, similar I--V characteristics and deviation are also observed in an isolated K0.27MnO2 nanowire.
基金This work was supported by the National Natural Science Foundation of China and the Chinese Academy of Sciences.
文摘A physical model of series of the conductivity on chain and the interchain conductivitybetween chains is proposed to explain enhanced conductivity of stretched conducting polymers.This model suggests that the enhanced conductivity for stretched conducting polymers might bedue to increasing of the interchain conductivity between chains along the elongation direction afterdrawing processes if the conductivity on chain is assumed much larger than that of the interchainconductivity between chains. According to this model, it is expected that the temperaturedependence of conductivity measured by four-probe method for stretched conducting polymers iscontrolled by a variation of the interchain conductivity between chains with temperature, whichcan be used to explain that a metallic temperature dependence of conductivity for stretchedconducting polymers is not observed although the conductivity along the elongation direction isenhanced by two or three orders of magnitude.
文摘The infrared emissivity of conducting polymers in 8—20μm and at 50—150℃ in the direction of normal line has been measured as a function of wavelength, conductivity at room temperature, counterion, doping levels, measuring temperature and thickness of sample.
基金This work was supported by the Key Project of Chinese Ministry of Education （No. 104208）the National Natural Science Foundation of China under grant No. 50573024.
文摘A pure conducting polymer （PANI-CSA） film conditioned by an electric discharge was tentatively utilized as an cathode for emitting electrons under electric fields. The emission of electrons was observed using a phosphor （ZnO：Zn） screen excited by electrons from the conditioned film. The film morphology was investigated using a scanning electron microscope and it was found that undulate whisker-like sites formed on the surface. The emission was presumably due to the undulate whisker-like sites. The field enhancement factor was estimated to be as high as 1150. The electron emitting process of the PANI-CSA film conditioned by electric discharge was also discussed.
文摘Conducting polymers sensors have been very interesting that it can detect wide variety of functionalities,however these materials have to solve humidity contaminant,poor reversibility and selectivity.To improve this problems,we investigated pretreatment such as soaking in methanol and thermal treatment in N_2.This process improved stability, reversibility and response time and recovery time.To overcome humidity contaminant coated hydrophobic polymer was reduced above 50% at RH10%.For sensor array structure was fabricated for enhancing selectivity of gas vapor.Conducting polymer sensor array had several application in environmental and medical science the method of principal component analysis.
文摘The electrochemical preparation of polypyrrole-carboxymethylcellulose （PPY-CMC） conducting polymer composite films on indium tin oxide （ITO） glass electrode from an aqueous solution containing pyrrole monomer, ptoluenesulfonate electrolyte and carboxymethylcellulose insulating polymer is reported. The characterization by Fourier transform infrared spectroscopy （FT-IR） shows that carboxymethylcellulose （CMC） has been successfully incorporated into polypyrrole structure forming PPY-CMC polymer composite films. The conductivity of the prepared composite films was found to increase with increaseing CMC concentration in pyrrole solution, The optical microscopic results show the influence of CMC concentration in the pyrrole solution over the morphological changes of the prepared films. The dynamic mechanical analysis （DMA） on the prepared PPY-CMC film reveals the higher plastic property of the PPY-CMC composite film.
基金supported by the National Natural Science Foundation of China (Grant No 10604038)Program for New Century Excellent Talents in University of China (Grant No NCET2007)
文摘This paper reports that the Schottky junctions between low work function metals （e.g. Al and In） and doped semiconducting polymer pellets （e.g. polyaniline （PANI） microsphere pellet and polypyrrole （PPy） nanotube pellet） have been prepared and studied. Since Ag is a high work function metal which can make an ohmic contact with polymer, silver paste was used to fabricate the electrodes. The Al/PANI/Ag heterojunction shows an obvious rectifying effect as shown in I - V characteristic curves （rectifying ratio γ = 5 at ±6 V bias at room temperature）. As compared to the Al/PANI/Ag, the heterojunction between In and PANI （In/PANI/Ag） exhibits a lower rectifying ratio γ= 1.6 at ±2 V bias at room temperature. In addition, rectifying effect was also observed in the heterojunctions Al/PPy/Ag （γ = 3.2 at ±1.6 V bias） and In/PPy/Ag （γ = 1.2 at ±3.0 V bias）. The results were discussed in terms of thermoionic emission theory.
文摘Method of VSC (Voltage Shorted Compaction)can be used to determine the intrinsic temperature dependence ofconductivity ofpolycrystalline compaction. The experimental conditions and technical key for preparation of VSC device and its physical model as well as its applications in conducting polymers are discussed in detail.
基金supported financially by the National Natural Science Foundation of China(grant no.52073211).
文摘Conducting polymers(CPs)have long been studied as cathode materials for lithium-ion batteries,but the low doping level(maximum:30–50%or even lower)and poor cycling stability limit their applications.Herein,we have developed a method of nanoporeconfined in situ electropolymerization to prepare nanostructured polythiophene-type porous cathodes,achieving significantly improved doping availability and long cycle life.It was verified that the nanosized polymer formed in situ and loose porous structure are conducive to the doping reaction and maintain high electrochemical stability.The constructed thieno[3,2-b]thiophene(TtTP)/active carbon cathode delivers an ultrahigh reversible capacity of 309.2 mAh g^(−1)(doping level up to 80.9%)along with an ultrahigh energy density of 1252.3 Wh Kg^(−1),and an ultrahigh rate capability(172.4 mAh g^(−1) at 30 A g^(−1)),which far exceed all the CPs and even all the p-type organic cathode materials reported.Moreover,an excellent long cycle life of 2000 cycles at 5 A g^(−1) is also revealed,which is a new record for CPs-based cathode materials in nonaqueous lithium-ion batteries.Our method provides an effective strategy to improve the doping level and cycling stability of CP-based cathode materials.
基金supported by the National Key Research and Development Program of China(No.2021YFC2400201)the National Natural Science Foundation of China(No.81830033)+1 种基金the Natural Science Foundation of Fujian Province,China(No.2023J05097)the Young and Middle-aged Teacher Education Research Project of the Education Department of Fujian Province,China(No.JAT220004)。
文摘Conducting polymers(CPs),including poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS),are promising coating materials for neural electrodes.However,the weak adhesion of CP coatings to substrates such as platinum-iridium is a significant challenge that limits their practical application.To address this issue,we used femtosecond laser-prepared hierarchical structures on platinum-iridium(Pt-Ir)substrates to enhance the adhesion of PEDOT:PSS coatings.Next,we used cyclic voltammetry(CV)stress and accelerated aging tests to evaluate the stability of both drop cast and electrodeposited PEDOT:PSS coatings on Pt-Ir substrates,both with and without hierarchical structures.Our results showed that after 2000 CV cycles or five weeks of aging at 60℃,the morphology and electrochemical properties of the coatings on the Pt-Ir substrates with hierarchical structures remained relatively stable.In contrast,we found that smooth Pt-Ir substrate surfaces caused delamination of the PEDOT:PSS coating and exhibited both decreased charge storage capacity and increased impedance.Overall,enhancing the stability of PEDOT:PSS coatings used on common platinum-iridium neural electrodes offers great potential for improving their electrochemical performance and developing new functionalities.
基金financial support from the National Natural Science Foundation of China(Nos.21474014 and 22175111)Z.G.thanks financial support from the National Natural Science Foundation of China(No.21704013)+1 种基金China Postdoctoral Science Foundation(No.2017M611416)R.B.W.thanks for financial support from the National Postdoctoral Program for Innovative Talents(No.BX201700044).
文摘There is a great interest in developing microelectronic devices based on nanostructured conducting polymers that can selectively electro-couple analytes at high sensitivity and low power.Nanostructured conducting polymers have emerged as promising candidates for this technology due to their excellent stability with low redox potential,high conductivity,and selectivity endowed by chemical functionalization.However,it remains challenging to develop cost-effective and large-scale assembly approaches for functionalized conducting polymers in the practical fabrication of electronic devices.Here,we reported a straightforward waferscale assembly of nanostructured hexafluoroisopropanol functionalized poly(3,4-ethylenedioxythiophene)(PEDOT-HFIP)on smooth substrates.This approach is template-free,solution-processed,and adaptable to conductive and nonconductive substrates.By this approach,the nanostructured PEDOT-HFIPs could be easily integrated onto interdigitated electrodes with intimate ohmic contact.At the optimized space-to-volume ratio,we demonstrated a low-power,sensitive,and selective nerve agent sensing technology using this platform by detecting sarin vapor with a limit of detection(LOD)of 10 ppb and signal strength of 400 times the water interference at the same concentration,offering significant advantages over existing similar technologies.We envision that its easy scale-up,micro size,small power consumption,and combination of high sensitivity and selectivity make it attractive for various wearable platforms.
基金supported by NSFC(22175111,21474014,21704013,and 51903149)the Program for Professor of Special Appointment(Eastern Scholar)at the Shanghai Institutions of Higher Learning(TP2019043)the Program of Shanghai Academic/Technology Research Leader(20XD1400100).
文摘Conducting polymers offer attractive mixed ionic-electronic conductivity,tunable interfacial barrier with metal,tissue matchable softness,and versatile chemical functionalization,making them robust to bridge the gap between brain tissue and electronic circuits.This review focuses on chemically revised conducting polymers,combined with their superior and controllable electrochemical performance,to fabricate long-term bioelectronic implants,addressing chronic immune responses,weak neuron attraction,and long-term electrocommunication instability challenges.Moreover,the promising progress of zwitterionic conducting polymers in bioelectronic implants(≥4 weeks stable implantation)is highlighted,followed by a comment on their current evolution toward selective neural coupling and reimplantable function.Finally,a critical forward look at the future of zwitterionic conducting polymers for in vivo bioelectronic devices is provided.
基金supported by the China Postdoctoral Science Foundation(No.2022M711745)the Science and Technology Benefiting the People Project of Qingdao(No.20-3-4-53-nsh)the Taishan Scholar Program of Shandong Province of China(No.ts20110829).
文摘Electrochemistry with antifouling sensing interfaces that effectively resist the adsorption of nonspecific biomolecules provides a powerful mean for the accurate and sensitive detection of disease biomarkers tive dete in complex biofluids.However.there are few strategies to acquire a stable and solid antifouling coat-ing on any substrate by a simple way.Herein,a simple one-step assembly methød has been adopted to construct phase-transited bovine serum albumin(PTB)antifouling Layers.Prior to construction of the an-tifouling layers.the poly(3,4-ethylenedioxythiophene)(PEDOT)doped with 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide(ionic liquid,IL)were firstly electrodeposited on bare electrodes,en-dowing good conductiviry and catalytic capability for the developed sensor.Subsequently.with the assist of tris(2-carboxyethyl)phosphine(TCEP)the disulfide bonds of bovine serum albumin(BSA)were re-Im alb duced to form PTB,which can be coated on the PEDOT-It modified electrode to construct an antifouling electrochemical senor(PTB/PEDOT-ILCCE)for the detection of uric acid(UA)in human serum.The UA sensor demonstrated a good linear range from 1.11 umol/L to 798.9 umol/L with a high sensltivity of0,556 jA umolL^(-1)cm^(-2).The combination of conducting polymers with one-step assembly of PTB offers a universal and rellable method før the modification of various electrodes to determine target molecules in complex human body fluids.
基金grant from the Ministry of Science and Technology of the People’s Republic of China(MOST),the Basic and Applied Basic Research Major Program of Guangdong Province(grant no.2019B030302007)the National Natural Science Foundation of China(grant no.U21A6002)the Guangdong-Hong Kong-Macao Joint Laboratory of Optoelectronic and Magnetic Functional Materials(grant no.2019B121205002).
文摘Solution-processed conducting polymers(CPs)are emerging as promising multifunctional materials and are motivating the development of several electronic applications.However,there are fewer highperformance electron conduction-dominated n-type CPs than p-types.Thus,the exploration of other material designs and synthesis methods is required.Accordingly,we developed a facile metal catalystfree method by combining polymerization and in situ n-doping to produce an n-type conducting polymer,poly(benzodithiophenedione)(PBTDO).The doping procedure enabled interaction between the charged conjugated backbones and solvent,dimethyl sulfoxide,making the doped conducting polymer soluble without the assistance of side chains or surfactants.PBTDO exhibited an extremely low-lying reduction level,moderate conductivity,and good air stability with potential applications in n-type organic thermoelectric devices.Moreover,it was found that the in situ doping efficiency in the reaction was highly dependent on the energy level and backbone planarity.Doping cannot occur for polymers with a high lowest unoccupied molecular orbital level and distorted conjugated chains prevent a high doping efficiency from being obtained.This study gains deeper insight into the n-doping mechanisms of conjugated polymers,with guidance for the design of highperformance n-type CPs.
