During the past ten years, a marine controlled source electromagnetic（CSEM） method has been developed rapidly as a technology for hydrocarbon exploration. For shallow water environments, two CSEM data acquisition sy...During the past ten years, a marine controlled source electromagnetic（CSEM） method has been developed rapidly as a technology for hydrocarbon exploration. For shallow water environments, two CSEM data acquisition systems： Seabed Logging（SBL） and towed streamer electromagnetics（TSEM） have been developed in recent years. The purpose is to compare the performance of the SBL and TSEM systems at different water depths. Three different methods for the comparison are presented. The first method is a quick one dimensional sensitivity modelling. As a result, the sensitivity of marine CSEM data increases with water depth for the SBL system. Further, the sensitivity decreases with the increasing water depth for the TSEM system. The two other methods use two dimensional synthetic data from a simple 2-D isotropic model. The second method is a reservoir sensitivity index（RSI） method which has been developed to provide a quick comparison of the two systems. The RSI is calculated as the amplitude of the scattered field dividing by data uncertainty. From the calculations, it is found that with the increasing water depth RSI increases for the SBL system, while it decreases for the TSEM system. The third method uses Occam＇s inversion, and applies an anomaly transverse resistance（ATR） ratio for evaluating the resulting resistivity image. In shallow water environments, the resolution of the CSEM inversion results is good for both the SBL and TSEM systems. In deep water environments, the resolution of the CSEM inversion is better for the SBL system than for the TSEM system. The ATR ratios of the resistivity images show the similar conclusion. The SBL data acquisition system has an advantage in deep water environments. The TSEM system, on the other hand, is preferable for the shallow water environments.展开更多
We propose a novel method that combines gray system theory and robust M-estimation method to suppress the interference in controlled-source electromagnetic data. We estimate the standard deviation of the data using a ...We propose a novel method that combines gray system theory and robust M-estimation method to suppress the interference in controlled-source electromagnetic data. We estimate the standard deviation of the data using a gray model because of the weak dependence of the gray system on data distribution and size. We combine the proposed and threshold method to identify and eliminate outliers. Robust M-estimation is applied to suppress the effect of the outliers and improve the accuracy. We treat the M-estimators of the preserved data as the true data. We use our method to reject the outliers in simulated signals containing noise to verify the feasibility of our proposed method. The processed values are observed to be approximate to the expected values with high accuracy. The maximum relative error is 3.6676%, whereas the minimum is 0.0251%. In processing field data, we observe that the proposed method eliminates outliers, minimizes the root-mean-square error, and improves the reliability of controlled-source electromagnetic data in follow-up processing and interpretation.展开更多
A novel method for source effect correction based on integral equation method is proposed.By taking the electrical horizontal field Ex of current source as an example,the correction method is validated using both simu...A novel method for source effect correction based on integral equation method is proposed.By taking the electrical horizontal field Ex of current source as an example,the correction method is validated using both simulated data and field data.The results show that the correction method is feasible and effective for isotropic media.When the field data are processed,the correction method normalizes the sources with different geological structures,which eliminates the geological difference among sources,and retains the geological difference among receivers.The correction results are in line with the expectation in whole.展开更多
Different geophysical exploration methods have significant differences in terms of exploration depth,especially in frequency domain electromagnetic(EM)exploration.According to the definition of skin depth,this differe...Different geophysical exploration methods have significant differences in terms of exploration depth,especially in frequency domain electromagnetic(EM)exploration.According to the definition of skin depth,this difference will increase with the effective detection frequency of the method.As a result,when performing three-dimensional inversion on single type of EM data,it is not possible to effectively distinguish the subsurface geoelectric structure at the full scale.Therefore,it is necessary to perform joint inversion on different type of EM data.In this paper we combine the magnetotelluric method(MT)with the controlled-source audio-magnetotelluric method(CSAMT)to study the frequency-domain three-dimensional(3D)joint inversions,and we use the unstructured finite-element method to do the forward modeling for them,so that the numerical simulation accuracies of different electromagnetic methods can be satisfied.By combining the two sets of data,we can obtain the sensitivity of the electrical structure at different depths,and depict the full-scale subsurface geoelectric structures.In actual mineral exploration,the 3D joint inversion is more useful for identifying subsurface veins in the shallow part and blind mines in the deep part.It can delineate the morphological distribution of ore bodies more completely and provide reliable EM interpretations to guide the mining of minerals.展开更多
As an important branch of geophysical exploration method,the electromagnetic method with artificial source has advanced rapidly in the past decade.These methods are classified as airborne electromagnetic method,ground...As an important branch of geophysical exploration method,the electromagnetic method with artificial source has advanced rapidly in the past decade.These methods are classified as airborne electromagnetic method,ground-air electromagnetic method,ground electromagnetic method,and marine electromagnetic method.Over the years,researchers in China have made significant improvement to the fundamental theory,forward modeling and inverse for series of electromagnetic detection methods.Conversely,significant progress was made in the development of corresponding equipment.The researched techniques and their developed equipment have been successfully utilized to detect underground targets as deep as 10 km.However,there is increasing need for deep resources exploration,urban subsurface study,and prediction,monitoring and detection of geological hazards.To meet the increasing need and catch up with the advanced international level of exploration technologies and developed equipment,there is urgent necessity and requirement to continue developing geophysical methods and the corresponding equipment.展开更多
The design and construction of wide-band and high efficiency acoustical projector has long been considered an art beyond the capabilities of many smaller groups. Langevin type piezoelectric transducers have been the m...The design and construction of wide-band and high efficiency acoustical projector has long been considered an art beyond the capabilities of many smaller groups. Langevin type piezoelectric transducers have been the most candidate of sonar array system applied in underwater communication. The transducers are fabricated, by bolting head mass and tail mass on both ends of stacked piezoelectric ceramic, to satisfy the multiple, conflicting design for high power transmitting capability. The aim of this research is to study the characteristics of Langevin type piezoelectric transducer that depend on different metal loading. First, the Mason equivalent circuit is used to model the segmented piezoelectric ceramic, then, the impedance network of tail and head masses is deduced by the Newton's theory. To obtain the optimal solution to a specific design formulation, PSPICE controlled-source programming techniques can be applied. A valid example of the application of PSPICE models for Langevin type transducer analysis is presented and the simulation results are in good agreement with the experimental measurements.展开更多
A high-power marine controlled-source electromagnetic transmitter(HP-MCSET)transmits a highfrequency conversion current on the sea floor.Some problems exist when the direct-current to alternating-current(DC-AC)launch ...A high-power marine controlled-source electromagnetic transmitter(HP-MCSET)transmits a highfrequency conversion current on the sea floor.Some problems exist when the direct-current to alternating-current(DC-AC)launch bridge(LB)is used in the marine controlled-source electromagnetic transmitter(MCSET).There is a high voltage peak in the LB when the insulated gate bipolar transistor(IGBT)is turned on and off.In some cases,the voltage stress of the IGBT can be exceeded,which may cause IGBT damage.Because the rise of the current steepness is relatively low and the output voltage has a voltage peak in the LB,a snubber circuit is added to the IGBT to suppress the voltage peak to improve the output current and voltage waveform.The suppression of the voltage peaks is analyzed and compared for several groups of snubber circuits.To meet the performance requirements of the MCSET,the optimal snubber circuit is selected to effectively suppress the voltage peaks at an output current of 1 kA.This method is verified by using a 70 kW MCSET and the experimental waveforms are provided.The simulation of the inductance obstruction load in seawater is necessary to determine the conditions for actual marine environment experiments.展开更多
Meshfree method offers high accuracy and computational capability and constructs the shape function without relying on predefined elements. We comparatively analyze the global weak form meshfree methods, such as eleme...Meshfree method offers high accuracy and computational capability and constructs the shape function without relying on predefined elements. We comparatively analyze the global weak form meshfree methods, such as element-free Galerkin method （EFGM）, the point interpolation method （PIM）, and the radial point interpolation method （RPIM）. Taking two dimensional Poisson equation as an example, we discuss the support-domain dimensionless size, the field nodes, and background element settings with respect to their effect on calculation accuracy of the meshfree method. RPIM and EFGM are applied to controlled- source two-dimensional electromagnetic modeling with fixed shape parameters. The accuracy of boundary conditions imposed directly and by a penalty function are discussed in the case of forward modeling of two-dimensional magnetotellurics in a homogeneous medium model. The coupling algorithm of EFG-PIM and EFG-RPIM are generated by integrating the PIM or RPIM and EFGM. The results of the numerical modeling suggest the following. First, the proposed meshfree method and corresponding coupled methods are well-suited for electromagnetic numerical modeling. The accuracy of the algorithm is the highest when the support-domain dimensionless size is 1.0 and the distribution of field nodes is consistent with the nodes of background elements. Second, the accuracy of PIM and RPIM are lower than that of EFGM for the Poisson equation but higher than EFGM for the homogeneous medium MT response. Third, RPIM overcomes the matrix inversion problem of PIM and has a wider selection of support-domain dimensionless sizes as compared to RPIM.展开更多
文摘During the past ten years, a marine controlled source electromagnetic（CSEM） method has been developed rapidly as a technology for hydrocarbon exploration. For shallow water environments, two CSEM data acquisition systems： Seabed Logging（SBL） and towed streamer electromagnetics（TSEM） have been developed in recent years. The purpose is to compare the performance of the SBL and TSEM systems at different water depths. Three different methods for the comparison are presented. The first method is a quick one dimensional sensitivity modelling. As a result, the sensitivity of marine CSEM data increases with water depth for the SBL system. Further, the sensitivity decreases with the increasing water depth for the TSEM system. The two other methods use two dimensional synthetic data from a simple 2-D isotropic model. The second method is a reservoir sensitivity index（RSI） method which has been developed to provide a quick comparison of the two systems. The RSI is calculated as the amplitude of the scattered field dividing by data uncertainty. From the calculations, it is found that with the increasing water depth RSI increases for the SBL system, while it decreases for the TSEM system. The third method uses Occam＇s inversion, and applies an anomaly transverse resistance（ATR） ratio for evaluating the resulting resistivity image. In shallow water environments, the resolution of the CSEM inversion results is good for both the SBL and TSEM systems. In deep water environments, the resolution of the CSEM inversion is better for the SBL system than for the TSEM system. The ATR ratios of the resistivity images show the similar conclusion. The SBL data acquisition system has an advantage in deep water environments. The TSEM system, on the other hand, is preferable for the shallow water environments.
基金supported by the National Natural Science Foundation of China(No.41227803)the State High-Tech Development Plan of China(No.2014AA06A602)the Fundamental Research Funds for the Central Universities of Central South University(No.2017557)
文摘We propose a novel method that combines gray system theory and robust M-estimation method to suppress the interference in controlled-source electromagnetic data. We estimate the standard deviation of the data using a gray model because of the weak dependence of the gray system on data distribution and size. We combine the proposed and threshold method to identify and eliminate outliers. Robust M-estimation is applied to suppress the effect of the outliers and improve the accuracy. We treat the M-estimators of the preserved data as the true data. We use our method to reject the outliers in simulated signals containing noise to verify the feasibility of our proposed method. The processed values are observed to be approximate to the expected values with high accuracy. The maximum relative error is 3.6676%, whereas the minimum is 0.0251%. In processing field data, we observe that the proposed method eliminates outliers, minimizes the root-mean-square error, and improves the reliability of controlled-source electromagnetic data in follow-up processing and interpretation.
基金Project(2018YFC0807802)supported by the National Key R&D Program of ChinaProject(41874081)supported by the National Natural Science Foundation of China。
文摘A novel method for source effect correction based on integral equation method is proposed.By taking the electrical horizontal field Ex of current source as an example,the correction method is validated using both simulated data and field data.The results show that the correction method is feasible and effective for isotropic media.When the field data are processed,the correction method normalizes the sources with different geological structures,which eliminates the geological difference among sources,and retains the geological difference among receivers.The correction results are in line with the expectation in whole.
基金Supported by the National Natural Science Foundation of China(No.42074120).
文摘Different geophysical exploration methods have significant differences in terms of exploration depth,especially in frequency domain electromagnetic(EM)exploration.According to the definition of skin depth,this difference will increase with the effective detection frequency of the method.As a result,when performing three-dimensional inversion on single type of EM data,it is not possible to effectively distinguish the subsurface geoelectric structure at the full scale.Therefore,it is necessary to perform joint inversion on different type of EM data.In this paper we combine the magnetotelluric method(MT)with the controlled-source audio-magnetotelluric method(CSAMT)to study the frequency-domain three-dimensional(3D)joint inversions,and we use the unstructured finite-element method to do the forward modeling for them,so that the numerical simulation accuracies of different electromagnetic methods can be satisfied.By combining the two sets of data,we can obtain the sensitivity of the electrical structure at different depths,and depict the full-scale subsurface geoelectric structures.In actual mineral exploration,the 3D joint inversion is more useful for identifying subsurface veins in the shallow part and blind mines in the deep part.It can delineate the morphological distribution of ore bodies more completely and provide reliable EM interpretations to guide the mining of minerals.
基金supported by the Beijing Science and Technology Plan(Grant No.Z181100005718001)the National Key R&D Program(Grant No.2017YFC0601204)the National Natural Science Foundation of China(Grant Nos.41874088&41830101)。
文摘As an important branch of geophysical exploration method,the electromagnetic method with artificial source has advanced rapidly in the past decade.These methods are classified as airborne electromagnetic method,ground-air electromagnetic method,ground electromagnetic method,and marine electromagnetic method.Over the years,researchers in China have made significant improvement to the fundamental theory,forward modeling and inverse for series of electromagnetic detection methods.Conversely,significant progress was made in the development of corresponding equipment.The researched techniques and their developed equipment have been successfully utilized to detect underground targets as deep as 10 km.However,there is increasing need for deep resources exploration,urban subsurface study,and prediction,monitoring and detection of geological hazards.To meet the increasing need and catch up with the advanced international level of exploration technologies and developed equipment,there is urgent necessity and requirement to continue developing geophysical methods and the corresponding equipment.
文摘The design and construction of wide-band and high efficiency acoustical projector has long been considered an art beyond the capabilities of many smaller groups. Langevin type piezoelectric transducers have been the most candidate of sonar array system applied in underwater communication. The transducers are fabricated, by bolting head mass and tail mass on both ends of stacked piezoelectric ceramic, to satisfy the multiple, conflicting design for high power transmitting capability. The aim of this research is to study the characteristics of Langevin type piezoelectric transducer that depend on different metal loading. First, the Mason equivalent circuit is used to model the segmented piezoelectric ceramic, then, the impedance network of tail and head masses is deduced by the Newton's theory. To obtain the optimal solution to a specific design formulation, PSPICE controlled-source programming techniques can be applied. A valid example of the application of PSPICE models for Langevin type transducer analysis is presented and the simulation results are in good agreement with the experimental measurements.
基金the National Science and Technology Major Project(No.2016ZX05021-002)the Strategic Pilot Science and Technology Project of the Chinese Academy of Sciences(No.XDB06030204)。
文摘A high-power marine controlled-source electromagnetic transmitter(HP-MCSET)transmits a highfrequency conversion current on the sea floor.Some problems exist when the direct-current to alternating-current(DC-AC)launch bridge(LB)is used in the marine controlled-source electromagnetic transmitter(MCSET).There is a high voltage peak in the LB when the insulated gate bipolar transistor(IGBT)is turned on and off.In some cases,the voltage stress of the IGBT can be exceeded,which may cause IGBT damage.Because the rise of the current steepness is relatively low and the output voltage has a voltage peak in the LB,a snubber circuit is added to the IGBT to suppress the voltage peak to improve the output current and voltage waveform.The suppression of the voltage peaks is analyzed and compared for several groups of snubber circuits.To meet the performance requirements of the MCSET,the optimal snubber circuit is selected to effectively suppress the voltage peaks at an output current of 1 kA.This method is verified by using a 70 kW MCSET and the experimental waveforms are provided.The simulation of the inductance obstruction load in seawater is necessary to determine the conditions for actual marine environment experiments.
基金supported by the National Nature Science Foundation of China(Grant No.40874055)the Natural Science Foundation of the Hunan Province,China(Grant No.14JJ2012)
文摘Meshfree method offers high accuracy and computational capability and constructs the shape function without relying on predefined elements. We comparatively analyze the global weak form meshfree methods, such as element-free Galerkin method （EFGM）, the point interpolation method （PIM）, and the radial point interpolation method （RPIM）. Taking two dimensional Poisson equation as an example, we discuss the support-domain dimensionless size, the field nodes, and background element settings with respect to their effect on calculation accuracy of the meshfree method. RPIM and EFGM are applied to controlled- source two-dimensional electromagnetic modeling with fixed shape parameters. The accuracy of boundary conditions imposed directly and by a penalty function are discussed in the case of forward modeling of two-dimensional magnetotellurics in a homogeneous medium model. The coupling algorithm of EFG-PIM and EFG-RPIM are generated by integrating the PIM or RPIM and EFGM. The results of the numerical modeling suggest the following. First, the proposed meshfree method and corresponding coupled methods are well-suited for electromagnetic numerical modeling. The accuracy of the algorithm is the highest when the support-domain dimensionless size is 1.0 and the distribution of field nodes is consistent with the nodes of background elements. Second, the accuracy of PIM and RPIM are lower than that of EFGM for the Poisson equation but higher than EFGM for the homogeneous medium MT response. Third, RPIM overcomes the matrix inversion problem of PIM and has a wider selection of support-domain dimensionless sizes as compared to RPIM.
