This paper studies the interface curing stresses between polymethyl methacrylate (PMMA) and composite by means of digital speckle correlation method (DSCM).A new method by combining DSCM with the marker points is deve...This paper studies the interface curing stresses between polymethyl methacrylate (PMMA) and composite by means of digital speckle correlation method (DSCM).A new method by combining DSCM with the marker points is developed to measure the interface curing stresses,and the measurement principle is introduced.The interface curing stresses between PMMA and composite with different curing bonding conditions are measured and analyzed,this indicates that the residual stress for furnace heating and furnace cooling is the smallest.Finally,the measurement error is discussed by means of finite element method,the influences of glass microsphere between adhesive and PMMA can be ignored.展开更多
The splitting test is a competitive alternative method to study the tensile strength of sea ice owing to its suitability for sampling.However,the approach was questioned to the neglect of local plastic deformation dur...The splitting test is a competitive alternative method to study the tensile strength of sea ice owing to its suitability for sampling.However,the approach was questioned to the neglect of local plastic deformation during the tests.In this study,splitting tests were performed on sea ice,with 32 samples subjected to the regular procedure and 8 samples subjected to the digital image correlation method.The salinity,density,and temperature were measured to determine the total porosity.With the advantage of the digital image correlation method,the full-field deformation of the ice samples could be determined.In the loading direction,the samples mainly deformed at the ice-platen contact area.In the direction vertical to the loading,deformation appears along the central line where the splitting crack occurs.Based on the distribution of the sample deformation,a modified solution was derived to calculate the tensile strength with the maximum load.Based on the modified solution,the tensile strength was further calculated together with the splitting test results.The results show that the tensile strength has a negative correlation with the total porosity,which agrees with previous studies based on uniaxial tension tests.展开更多
In the measurement of G with the angular acceleration method,the improved correlation method developed by Wu et al.(Wu W H,Tian Y,Luo J,Shao C G,Xu J H and Wang DH 2016 Rev.Sci.Instrum.87 094501) is used to accurately...In the measurement of G with the angular acceleration method,the improved correlation method developed by Wu et al.(Wu W H,Tian Y,Luo J,Shao C G,Xu J H and Wang DH 2016 Rev.Sci.Instrum.87 094501) is used to accurately estimate the amplitudes of the prominent harmonic components of the gravitational background signal with time-varying frequency.Except the quadratic slow drift,the angular frequency of the gravitational background signal also includes a cosine oscillation coming from the useful angular acceleration signal,which leads to a deviation from the estimated amplitude.We calculate the correction of the cosine oscillation to the amplitude estimation.The result shows that the corrections of the cosine oscillation to the amplitudes of the fundamental frequency and second harmonic components obtained by the improved correlation method are within respective errors.展开更多
According to the data from Henan Statistical Yearbook from 2002 to 2008, from production capital, production conditions, labour inputs and financial support, this paper selects 11 variables influencing comprehensive p...According to the data from Henan Statistical Yearbook from 2002 to 2008, from production capital, production conditions, labour inputs and financial support, this paper selects 11 variables influencing comprehensive productivity of agriculture in Henan Province. Through calculation and analysis of grey correlation of variables and comprehensive productivity of agriculture, this paper determines the impact of different variables on comprehensive productivity of agriculture. The results show that the agricultural capital has become the most important factor influencing comprehensive productivity of agriculture in Henan Province, while the impact of production conditions, labour inputs and financial support on comprehensive productivity of agriculture in Henan Province diminishes in turn. Corresponding countermeasures and suggestions are put forward to promote the sustainable development of comprehensive productivity of agriculture in Henan Province as follows: strengthen agricultural financial system building, and ensure agricultural production expenditure; scientifically arrange allocation of agricultural resources, and improve agricultural production conditions; carry out training of agricultural skills, and elevate the quality of agricultural labour forces; increase financial expenditure for agricultural production, and optimize financial expenditure structure.展开更多
A backfilling body-coal pillar-backfilling body(BPB)structure formed by pillar-side cemented paste backfilling can bear overburden stress and ensure safe mining.However,the failure response of BPB composite samples mu...A backfilling body-coal pillar-backfilling body(BPB)structure formed by pillar-side cemented paste backfilling can bear overburden stress and ensure safe mining.However,the failure response of BPB composite samples must be investigated.This paper examines the deformation characteristics and damage evolution of six types of BPB composite samples using a digital speckle correlation method under uniaxial compression conditions.A new damage evolution equation was established on the basis of the input strain energy and dissipated strain energy at the peak stress.The prevention and control mechanisms of the backfilling body on the coal pillar instability were discussed.The results show that the deformation localization and macroscopic cracks of the BPB composite samples first appeared at the coal-backfilling interface,and then expanded to the backfilling elements,ultimately appearing in the coal elements.The elastic strain energy in the BPB composite samples reached a maximum at the peak stress,whereas the dissipated energy continued to accumulate and increase.The damage evolution curve and equation agree well with the test results,providing further understanding of instability prevention and the control mechanisms of the BPB composite samples.The restraining effect on the coal pillar was gradually reduced with decreasing backfilling body element's volume ratio,and the BPB composite structure became more vulnerable to failure.This research is expected to guide the design,stability monitoring,instability prevention,and control of BPB structures in pillar-side cemented paste backfilling mining.展开更多
In order to solve the defect of large error in current employment quality evaluation,an employment quality evaluation model based on grey correlation degree method and fuzzy C-means(FCM)is proposed.Firstly,it analyzes...In order to solve the defect of large error in current employment quality evaluation,an employment quality evaluation model based on grey correlation degree method and fuzzy C-means(FCM)is proposed.Firstly,it analyzes the related research work of employment quality evaluation,establishes the employment quality evaluation index system,collects the index data,and normalizes the index data;Then,the weight value of employment quality evaluation index is determined by Grey relational analysis method,and some unimportant indexes are removed;Finally,the employment quality evaluation model is established by using fuzzy cluster analysis algorithm,and compared with other employment quality evaluation models.The test results show that the employment quality evaluation accuracy of the design model exceeds 93%,the employment quality evaluation error can meet the requirements of practical application,and the employment quality evaluation effect is much better than the comparison model.The comparison test verifies the superiority of the model.展开更多
Aimed at improving the bias stability of Fiber-Optic Gyroscope(FOG)-based inertial navigation systems in environments of various ambient temperatures,a novel temperaturecompensation method based on a correlation analy...Aimed at improving the bias stability of Fiber-Optic Gyroscope(FOG)-based inertial navigation systems in environments of various ambient temperatures,a novel temperaturecompensation method based on a correlation analysis of the same batch of FOGs is proposed.The empirical mode decomposition method was employed to filter the high-frequency noises of the FOGs.Then,the correlation information of the multiple FOGs was used to analyze the feasibility of the method.Eventually,the same residual error of the FOGs was compensated via the simple piecewise linear models.The experimental results indicate that excellent compensation effects for both high-and low-accuracy FOGs are achieved using the proposed method.Specifically,the accuracies of high-accuracy FOGs are improved by approximately 33.9%,20%,and 31.2%,while those of low-accuracy FOGs are improved by approximately 39.1%,20.8%,and 26.1%.The method exhibits the merits of simplicity,validity,and stability,and thus is expected to be widely used in engineering applications.展开更多
Lunar Penetrating Radar(LPR) has successfully been used to acquire a large amount of scientific data during its in-situ detection. The analysis of penetrating depth can help to determine whether the target is within t...Lunar Penetrating Radar(LPR) has successfully been used to acquire a large amount of scientific data during its in-situ detection. The analysis of penetrating depth can help to determine whether the target is within the effective detection range and contribute to distinguishing useful echoes from noise.First, this study introduces two traditional methods, both based on a radar transmission equation, to calculate the penetrating depth. The only difference between the two methods is that the first method adopts system calibration parameters given in the calibration report and the second one uses high-voltage-off radar data. However, some prior knowledge and assumptions are needed in the radar equation and the accuracy of assumptions will directly influence the final results. Therefore, a new method termed the Correlation Coefficient Method(CCM) is provided in this study, which is only based on radar data without any a priori assumptions. The CCM can obtain the penetrating depth according to the different correlation between reflected echoes and noise. To be exact, there is a strong correlation in the useful reflected echoes and a random correlation in the noise between adjacent data traces. In addition, this method can acquire a variable penetrating depth along the profile of the rover, but only one single depth value can be obtained from traditional methods. Through a simulation, the CCM has been verified as an effective method to obtain penetration depth. The comparisons and analysis of the calculation results of these three methods are also implemented in this study. Finally, results show that the ultimate penetrating depth of Channel 1 and the estimated penetrating depth of Channel 2 range from 136.9 m to 165.5 m(ε_r = 6.6) and from 13.0 m to 17.5 m(ε_r = 2.3), respectively.展开更多
Accurate prediction of shield tunneling-induced settlement is a complex problem that requires consideration of many influential parameters.Recent studies reveal that machine learning(ML)algorithms can predict the sett...Accurate prediction of shield tunneling-induced settlement is a complex problem that requires consideration of many influential parameters.Recent studies reveal that machine learning(ML)algorithms can predict the settlement caused by tunneling.However,well-performing ML models are usually less interpretable.Irrelevant input features decrease the performance and interpretability of an ML model.Nonetheless,feature selection,a critical step in the ML pipeline,is usually ignored in most studies that focused on predicting tunneling-induced settlement.This study applies four techniques,i.e.Pearson correlation method,sequential forward selection(SFS),sequential backward selection(SBS)and Boruta algorithm,to investigate the effect of feature selection on the model’s performance when predicting the tunneling-induced maximum surface settlement(S_(max)).The data set used in this study was compiled from two metro tunnel projects excavated in Hangzhou,China using earth pressure balance(EPB)shields and consists of 14 input features and a single output(i.e.S_(max)).The ML model that is trained on features selected from the Boruta algorithm demonstrates the best performance in both the training and testing phases.The relevant features chosen from the Boruta algorithm further indicate that tunneling-induced settlement is affected by parameters related to tunnel geometry,geological conditions and shield operation.The recently proposed Shapley additive explanations(SHAP)method explores how the input features contribute to the output of a complex ML model.It is observed that the larger settlements are induced during shield tunneling in silty clay.Moreover,the SHAP analysis reveals that the low magnitudes of face pressure at the top of the shield increase the model’s output。展开更多
Based on the factors impact strength model(FISM), we studied on calculation formulas of influence strength and key elements of FISM, and analyzed the turnover time of railway freight transportation of China. The resul...Based on the factors impact strength model(FISM), we studied on calculation formulas of influence strength and key elements of FISM, and analyzed the turnover time of railway freight transportation of China. The results show that wagon transfer time is the most critical factor among the three subjective factors of wagons turnover time. The FISM based analysis of wagon transfer time show that the wagon turnover time is significantly correlated with transit time with resorting. Among the seven factors of detention time of transit time with resorting, the time of waiting to departing, converging, and waiting to break-up are key factors, while the time of make-up, break-up, arrival and departure are general factors. We carried out one empirical research based on the data of Baoji East Railway Station in 2015. The results of empirical research and FISM are consistent completely.展开更多
In order to study the damage mechanism of asphalt mixture,it is important to obtain the distribution of displacement and strain of its sample in the indirect tension mode.As a result,the digital image correlation meth...In order to study the damage mechanism of asphalt mixture,it is important to obtain the distribution of displacement and strain of its sample in the indirect tension mode.As a result,the digital image correlation method (DICM) was used to evaluate the displacement field and strain field of asphalt mixture.The results showed that the displacement fields under DICM and ABAQUS are similarly;the strain fields are different due to the different modulus of mastic and aggregate;and DICM is an practical method to study the indirect tension displacement and stain.展开更多
Weld bead morphology plays an important role in welding procedure specification and welding process planning.In order to obtain the quantitative relationship between process parameters and weld morphology of DH36 mari...Weld bead morphology plays an important role in welding procedure specification and welding process planning.In order to obtain the quantitative relationship between process parameters and weld morphology of DH36 marine steel plate,grey correlation method was used to study multiple morphology characteristics simultaneously.Eighteen experimental runs were proposed according to orthogonal method.With grey correlation theory,three response objectives,aspect ratio,depth of penetration and weld were transformed into a single grey correlation grade(GRG).The process parameters were quantitatively correlated to the GRG value and optimized with the target of maximum aspect ratio,minimum depth of penetration and maximum weld area.The results show that the optimized weld bead morphology is better than other weld bead morphology.The relative error of the predicted GRG with respect to the actual value is 5.06%,which further verifies the accuracy of the established model.The microstructure and hardness analysis suggests that the optimized welded joint has obtained required mechanical properties.The research outcomes provide a theoretical basis for multi-objective optimization of arc welding morphology in practical applications.展开更多
The research investigated the corrosion of the reinjection water system to ensure the safe production of the system.By analyzing the composition of the methanol-containing wastewater,the corrosion status of the inject...The research investigated the corrosion of the reinjection water system to ensure the safe production of the system.By analyzing the composition of the methanol-containing wastewater,the corrosion status of the injection water system was studied by the on-site materials 20#steel,Q235B steel and L316 steel for that the methanol-containing wastewater of a natural gas processing plant in northern Shaanxi had high acidity,Cl-and sulfide contents,salinity and corrosion.Then the grey system theory modeling software 3.0 was used to study the influence degree of various corrosion factors on the corrosion rate and depth of Q235B steel.The most important factors were determined,and countermeasures against corrosion were proposed.The results showed that L316 steel was more resistant to corrosion,and the corrosion rate was 0.0015 mm/a,which was less than the national standard(0.0760 mm/a).The maximum corrosion depth was 47.63μm,which was the lowest among the three materials.The corrosion rate and depth were the parent factors.Among the four factors of sulfide,Cl-,salinity and pH,grey relational degrees of sulfide were 0.75 and 0.80,respectively,which was the most important factor causing corrosion;using sulfur corrosion inhibitor protection method,TS-792C was selected by electrochemical method from three corrosion inhibitors.The impedance data simulation software ZSimpWin was used to simulate the equivalent circuit diagram,and the impedance of Q235B steel was the largest.The corrosion inhibition rate was up to 90.26%when corrosion rate was 0.0130 mm/a under the fitting of Tafel polarization curve,with the best anti-sulfur effect.At 80℃and a sulfide content of 300 mg/L,the corrosion rate of Q235B steel was less than 0.0760 mm/a.When the added amount was 100 mg/L,the corrosion current density and corrosion rate of the reinjection sewage was 0.462 mA/cm 2 and 0.0505 mm/a,both at the lowest values and with good temperature and sulfur resistance.展开更多
In order to determine the optimal structural parameters of a plastic centrifugal pump in the framework of an orthogonal-experiment approach,a numerical study of the related flow field has been performed using CFX.The ...In order to determine the optimal structural parameters of a plastic centrifugal pump in the framework of an orthogonal-experiment approach,a numerical study of the related flow field has been performed using CFX.The thickness S,outlet angleβ2,inlet angleβ1,wrap angle,and inlet diameter D1 of the splitter blades have been considered as the variable factors,using the shaft power and efficiency of the pump as evaluation indices.Through a parametric analysis,the relative importance of the influence of each structural parameter on each evaluation index has been obtained,leading to the following combinations:β119°,β235°,S 2 mm,wrap angle 154°,and D185 mm(corresponding to the maximum efficiency of 75.48%);β119°,β220°,S 6 mm,wrap angle 158°,and D181 mm(corresponding to the minimum shaft power of 75.48%).Moreover,the grey correlation method has been applied to re-optimize the shaft power and efficiency of the pump,leading to the following optimal combination:β119°,β215°,S 4 mm,D181 mm,and wrap angle 152°(corresponding to the maximum efficiency of 71.81%and minimum shaft power of 2.187 kW).展开更多
According to the relationship between load and response, the equivalent static wind load(ESWL) of a structure can be estimated by load-response correlation(LRC) method, which can be accurately used to estimate the bac...According to the relationship between load and response, the equivalent static wind load(ESWL) of a structure can be estimated by load-response correlation(LRC) method, which can be accurately used to estimate the background ESWL of a structure. The derivation of the classical expression of LRC formula is based on a specific command response at a critical position, and the ESWL distribution has only one form in this case. In this paper, a general expression of LRC formula is derived based on a specific command response at all positions. For the general expression, ESWLs can be expressed by load-response correlation coefficients, response-response correlation coefficients, RMS values of the fluctuating wind loads, and peak factor in the form of matrices. By comparing the expressions of LRC method, it was found that the classical expression was only one form of the general one. The general expression which introduces the response-response correlation coefficients provided more options for structural engineers to estimate ESWLs and offered further insights into the LRC method. Finally, a cable-stayed bridge, a rigid three span continuous girder bridge, and a suspension bridge were used to verify the correctness of the general expression of LRC method.展开更多
Seismic hazard analysis is gaining increased attention in the present era because of the catastrophic effects of earthquakes.Scientists always have as a goal to develop new techniques that will help forecast earthquak...Seismic hazard analysis is gaining increased attention in the present era because of the catastrophic effects of earthquakes.Scientists always have as a goal to develop new techniques that will help forecast earthquakes before their reoccurrence. In this research,we have performed a shear failure experiment on rock samples with prefabricated cracks to simulate the process of plate movement that forms strike-slip faults. We studied the evolution law of the deformation field to simulate the shear failure experiment, and these results gave us a comprehensive understanding of the elaborate strain distribution law and its formation process with which to identify actual fault zones. We performed uniaxial compression tests on marble slabs with prefabricated double shear cracks to study the distribution and evolution of the deformation field during shear failure. Analysis of the strain field at different loading stages showed that with an increase in the load, the shear strain field initially changed to a disordered-style distribution. Further, the strain field was partially concentrated and finally completely concentrated near the crack and then distributed in the shape of a strip along the crack. We also computed coefficients of variation(CVs) for the physical quantities u, v, and exy, which varied with the load. The CV curves were found to correspond to the different loading stages. We found that at the uniform deformation stage, the CV value was small and changed slowly,whereas at the later nonuniform deformation stage, the CV value increased sharply and changed abruptly. Therefore, the precursor to a rock sample breakdown can be predicted by observing the variation characteristics of CV statistics. The correlation we found between our experimental and theoretical results revealed that our crack evolution and sample deformation results showed good coupling with seismic distribution characteristics near the San Andreas Fault.展开更多
Under the macro background of rapid urbanization and social transformation in China,campus space renewal has become an important practice and carrier for the sustainable development of schools.The study on campus spac...Under the macro background of rapid urbanization and social transformation in China,campus space renewal has become an important practice and carrier for the sustainable development of schools.The study on campus space by big data and quantitative reflection of spatial distribution of applicable people in different areas of the campus can provide a certain scientific basis for campus space updating.West campus of Yangtze University is taken as research object.Based on cognitive map method,questionnaire survey method,behavior trajectory and correlation analysis method,the types and characteristics of campus space composition,campus satisfaction,usage and its relevance are analyzed.Research results show that ①the overall imageability of campus space is higher,which has a significantly positive correlation with the satisfaction of campus environment,and has no correlation with users’ behavior activities.The use frequency of non teaching areas varies greatly in different periods of time.②The correlation between the surrounding green vegetation and the image degree of campus landmarks is the most significant,and the coefficient is 0.886.③The correlation between spatial size suitability and regional image degree is the most significant,and the coefficient is 0.937.④The correlation between public activity facilities in the region and node image degree is the most significant,and the coefficient is 0.995.According to the research results,the corresponding solutions are put forward to provide scientific and quantitative reference suggestions for the renewal and transformation of the campus.展开更多
China is gradually establishing a multidisciplinary diagnosis and treatment system of traditional Chinese medicine(TCM)and western medicine.TCM-drug combination is prone to adverse reactions.Clinical feature is the ap...China is gradually establishing a multidisciplinary diagnosis and treatment system of traditional Chinese medicine(TCM)and western medicine.TCM-drug combination is prone to adverse reactions.Clinical feature is the appearance of adverse reactions,and target is the internal mechanism.The establishment of feature and target correlation model will contribute to the development of this field.This paper introduces the four steps of feature-target correlation method that risk identification,feature extraction,sign target correlation and experimental research.Xiyanping-Ribavirin combination is as an example to illustrate this method.It is expected that the method will be popularized and applied to protect clinical safety.展开更多
We present a global optimization method, called the genetic algorithms (GAs), for digital image/speckle correlation (DISC). The new algorithms do not involve reasonable initial guess of displacement and deformation gr...We present a global optimization method, called the genetic algorithms (GAs), for digital image/speckle correlation (DISC). The new algorithms do not involve reasonable initial guess of displacement and deformation gradient and the calculation of second-order spatial derivatives of the digital images, which are important challenges in practical implementation of DISC. The performance of a GA depends largely on the selection of the genetic operators. We test various operators and propose optimal operators. The algorithms are then verified using simulated images and experimental speckle images.展开更多
The isotropic and anisotropic behaviors are considered as the important formats of the constitutive behaviors,and can also be called the global properties.To improve the identification ability of virtual fields method...The isotropic and anisotropic behaviors are considered as the important formats of the constitutive behaviors,and can also be called the global properties.To improve the identification ability of virtual fields method(VFM)when the global properties are unknown,this paper proposes the strain correlation method(SCM)to determine the global properties before the parameter identification using the VFM.Firstly,the basic principle of SCM is described in detail.Then,the feasibility and accuracy of SCM are verified through the numerical experiments based on the three-point bending configuration and the real experiment of polymethyl methacrylate(PMMA).The influence of the additive Gaussian white noise,local errors in the strain fields,and missing data at the specimen edges on the characterization results are evaluated.The results show that the SCM has good noise immunity and lower accuracy requirements for the strain fields.As an application,the mechanical properties of Ti-6A1-4V alloys fabricated by selective laser melting(SLM)are characterized by the SCM.The results show that the alloys are isotropic,and the isotropic VFM is utilized to determine the mechanical parameters.By using the SCM,the accuracy of identification results can be improved for the isotropic or bidirectional reinforced orthotropic materials when using VFM.展开更多
基金supported by the National Basic Research Program (973 Program) of China (2011CB606105)
文摘This paper studies the interface curing stresses between polymethyl methacrylate (PMMA) and composite by means of digital speckle correlation method (DSCM).A new method by combining DSCM with the marker points is developed to measure the interface curing stresses,and the measurement principle is introduced.The interface curing stresses between PMMA and composite with different curing bonding conditions are measured and analyzed,this indicates that the residual stress for furnace heating and furnace cooling is the smallest.Finally,the measurement error is discussed by means of finite element method,the influences of glass microsphere between adhesive and PMMA can be ignored.
基金This study was supported financially by the National Key Research and Development Program of China(Grant no.2018YFA0605902)the National Natural Science Foundation of China(Grant no.52101300)+1 种基金the Fundamental Research Funds for the Central Universities(Grant no.DUT21LK03)Joint Scientific Research Fund Project of DBJI(Grant no.ICR2102).
文摘The splitting test is a competitive alternative method to study the tensile strength of sea ice owing to its suitability for sampling.However,the approach was questioned to the neglect of local plastic deformation during the tests.In this study,splitting tests were performed on sea ice,with 32 samples subjected to the regular procedure and 8 samples subjected to the digital image correlation method.The salinity,density,and temperature were measured to determine the total porosity.With the advantage of the digital image correlation method,the full-field deformation of the ice samples could be determined.In the loading direction,the samples mainly deformed at the ice-platen contact area.In the direction vertical to the loading,deformation appears along the central line where the splitting crack occurs.Based on the distribution of the sample deformation,a modified solution was derived to calculate the tensile strength with the maximum load.Based on the modified solution,the tensile strength was further calculated together with the splitting test results.The results show that the tensile strength has a negative correlation with the total porosity,which agrees with previous studies based on uniaxial tension tests.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11575160,11175160,11275075,and 11511130011)
文摘In the measurement of G with the angular acceleration method,the improved correlation method developed by Wu et al.(Wu W H,Tian Y,Luo J,Shao C G,Xu J H and Wang DH 2016 Rev.Sci.Instrum.87 094501) is used to accurately estimate the amplitudes of the prominent harmonic components of the gravitational background signal with time-varying frequency.Except the quadratic slow drift,the angular frequency of the gravitational background signal also includes a cosine oscillation coming from the useful angular acceleration signal,which leads to a deviation from the estimated amplitude.We calculate the correction of the cosine oscillation to the amplitude estimation.The result shows that the corrections of the cosine oscillation to the amplitudes of the fundamental frequency and second harmonic components obtained by the improved correlation method are within respective errors.
文摘According to the data from Henan Statistical Yearbook from 2002 to 2008, from production capital, production conditions, labour inputs and financial support, this paper selects 11 variables influencing comprehensive productivity of agriculture in Henan Province. Through calculation and analysis of grey correlation of variables and comprehensive productivity of agriculture, this paper determines the impact of different variables on comprehensive productivity of agriculture. The results show that the agricultural capital has become the most important factor influencing comprehensive productivity of agriculture in Henan Province, while the impact of production conditions, labour inputs and financial support on comprehensive productivity of agriculture in Henan Province diminishes in turn. Corresponding countermeasures and suggestions are put forward to promote the sustainable development of comprehensive productivity of agriculture in Henan Province as follows: strengthen agricultural financial system building, and ensure agricultural production expenditure; scientifically arrange allocation of agricultural resources, and improve agricultural production conditions; carry out training of agricultural skills, and elevate the quality of agricultural labour forces; increase financial expenditure for agricultural production, and optimize financial expenditure structure.
基金supported by the Shanxi Science and Technology Major Project (No.20201102004)the Distinguished Youth Funds of National Natural Science Foundation of China (No.51925402)+2 种基金the National Natural Science Foundation of China (Nos.52174125,52004171,and 51904203)the Outstanding Youth Cultivation Project in Shanxi Province,China (No.202103021222008)the Key Science and Technology Innovation Team of“1331”Project in Shanxi Province,China,and the Open Fund Project of Key Laboratory of Mining Disaster Prevention and Control (No.MDPC202004)。
文摘A backfilling body-coal pillar-backfilling body(BPB)structure formed by pillar-side cemented paste backfilling can bear overburden stress and ensure safe mining.However,the failure response of BPB composite samples must be investigated.This paper examines the deformation characteristics and damage evolution of six types of BPB composite samples using a digital speckle correlation method under uniaxial compression conditions.A new damage evolution equation was established on the basis of the input strain energy and dissipated strain energy at the peak stress.The prevention and control mechanisms of the backfilling body on the coal pillar instability were discussed.The results show that the deformation localization and macroscopic cracks of the BPB composite samples first appeared at the coal-backfilling interface,and then expanded to the backfilling elements,ultimately appearing in the coal elements.The elastic strain energy in the BPB composite samples reached a maximum at the peak stress,whereas the dissipated energy continued to accumulate and increase.The damage evolution curve and equation agree well with the test results,providing further understanding of instability prevention and the control mechanisms of the BPB composite samples.The restraining effect on the coal pillar was gradually reduced with decreasing backfilling body element's volume ratio,and the BPB composite structure became more vulnerable to failure.This research is expected to guide the design,stability monitoring,instability prevention,and control of BPB structures in pillar-side cemented paste backfilling mining.
基金supported by the project of science and technology of Henan province under Grant No.222102240024 and 202102210269the Key Scientific Research projects in Colleges and Universities in Henan Grant No.22A460013 and No.22B413004.
文摘In order to solve the defect of large error in current employment quality evaluation,an employment quality evaluation model based on grey correlation degree method and fuzzy C-means(FCM)is proposed.Firstly,it analyzes the related research work of employment quality evaluation,establishes the employment quality evaluation index system,collects the index data,and normalizes the index data;Then,the weight value of employment quality evaluation index is determined by Grey relational analysis method,and some unimportant indexes are removed;Finally,the employment quality evaluation model is established by using fuzzy cluster analysis algorithm,and compared with other employment quality evaluation models.The test results show that the employment quality evaluation accuracy of the design model exceeds 93%,the employment quality evaluation error can meet the requirements of practical application,and the employment quality evaluation effect is much better than the comparison model.The comparison test verifies the superiority of the model.
基金supported by the Young Scientists Fund,China(No.62103021).
文摘Aimed at improving the bias stability of Fiber-Optic Gyroscope(FOG)-based inertial navigation systems in environments of various ambient temperatures,a novel temperaturecompensation method based on a correlation analysis of the same batch of FOGs is proposed.The empirical mode decomposition method was employed to filter the high-frequency noises of the FOGs.Then,the correlation information of the multiple FOGs was used to analyze the feasibility of the method.Eventually,the same residual error of the FOGs was compensated via the simple piecewise linear models.The experimental results indicate that excellent compensation effects for both high-and low-accuracy FOGs are achieved using the proposed method.Specifically,the accuracies of high-accuracy FOGs are improved by approximately 33.9%,20%,and 31.2%,while those of low-accuracy FOGs are improved by approximately 39.1%,20.8%,and 26.1%.The method exhibits the merits of simplicity,validity,and stability,and thus is expected to be widely used in engineering applications.
基金supported by the National Natural Science Foundation of China (Grant No. 41403054)
文摘Lunar Penetrating Radar(LPR) has successfully been used to acquire a large amount of scientific data during its in-situ detection. The analysis of penetrating depth can help to determine whether the target is within the effective detection range and contribute to distinguishing useful echoes from noise.First, this study introduces two traditional methods, both based on a radar transmission equation, to calculate the penetrating depth. The only difference between the two methods is that the first method adopts system calibration parameters given in the calibration report and the second one uses high-voltage-off radar data. However, some prior knowledge and assumptions are needed in the radar equation and the accuracy of assumptions will directly influence the final results. Therefore, a new method termed the Correlation Coefficient Method(CCM) is provided in this study, which is only based on radar data without any a priori assumptions. The CCM can obtain the penetrating depth according to the different correlation between reflected echoes and noise. To be exact, there is a strong correlation in the useful reflected echoes and a random correlation in the noise between adjacent data traces. In addition, this method can acquire a variable penetrating depth along the profile of the rover, but only one single depth value can be obtained from traditional methods. Through a simulation, the CCM has been verified as an effective method to obtain penetration depth. The comparisons and analysis of the calculation results of these three methods are also implemented in this study. Finally, results show that the ultimate penetrating depth of Channel 1 and the estimated penetrating depth of Channel 2 range from 136.9 m to 165.5 m(ε_r = 6.6) and from 13.0 m to 17.5 m(ε_r = 2.3), respectively.
基金support provided by The Science and Technology Development Fund,Macao SAR,China(File Nos.0057/2020/AGJ and SKL-IOTSC-2021-2023)Science and Technology Program of Guangdong Province,China(Grant No.2021A0505080009).
文摘Accurate prediction of shield tunneling-induced settlement is a complex problem that requires consideration of many influential parameters.Recent studies reveal that machine learning(ML)algorithms can predict the settlement caused by tunneling.However,well-performing ML models are usually less interpretable.Irrelevant input features decrease the performance and interpretability of an ML model.Nonetheless,feature selection,a critical step in the ML pipeline,is usually ignored in most studies that focused on predicting tunneling-induced settlement.This study applies four techniques,i.e.Pearson correlation method,sequential forward selection(SFS),sequential backward selection(SBS)and Boruta algorithm,to investigate the effect of feature selection on the model’s performance when predicting the tunneling-induced maximum surface settlement(S_(max)).The data set used in this study was compiled from two metro tunnel projects excavated in Hangzhou,China using earth pressure balance(EPB)shields and consists of 14 input features and a single output(i.e.S_(max)).The ML model that is trained on features selected from the Boruta algorithm demonstrates the best performance in both the training and testing phases.The relevant features chosen from the Boruta algorithm further indicate that tunneling-induced settlement is affected by parameters related to tunnel geometry,geological conditions and shield operation.The recently proposed Shapley additive explanations(SHAP)method explores how the input features contribute to the output of a complex ML model.It is observed that the larger settlements are induced during shield tunneling in silty clay.Moreover,the SHAP analysis reveals that the low magnitudes of face pressure at the top of the shield increase the model’s output。
基金Funded by the Fundamental Research Funds for the Central Universities of China(No.26816WTD23)the National United Engineering Laboratory of Integrated and Intelligent Transportation of Southwest Jiaotong University,P.R.China(No.2682017ZT11)
文摘Based on the factors impact strength model(FISM), we studied on calculation formulas of influence strength and key elements of FISM, and analyzed the turnover time of railway freight transportation of China. The results show that wagon transfer time is the most critical factor among the three subjective factors of wagons turnover time. The FISM based analysis of wagon transfer time show that the wagon turnover time is significantly correlated with transit time with resorting. Among the seven factors of detention time of transit time with resorting, the time of waiting to departing, converging, and waiting to break-up are key factors, while the time of make-up, break-up, arrival and departure are general factors. We carried out one empirical research based on the data of Baoji East Railway Station in 2015. The results of empirical research and FISM are consistent completely.
基金Sponsored by the National Science and Technology Infrastructure Program (Grant No. 2006BAJ18B05)the National Natural Science Foundation of China(Grant No.50778057)+1 种基金Program for New Century Excellent Talents in University (Grant No. NCET-06-0340)the Specialized Research Fund for the Doctoral Program of Higher Education (Grant No. 20060213002)
文摘In order to study the damage mechanism of asphalt mixture,it is important to obtain the distribution of displacement and strain of its sample in the indirect tension mode.As a result,the digital image correlation method (DICM) was used to evaluate the displacement field and strain field of asphalt mixture.The results showed that the displacement fields under DICM and ABAQUS are similarly;the strain fields are different due to the different modulus of mastic and aggregate;and DICM is an practical method to study the indirect tension displacement and stain.
基金Natural Science Foundation of Fujian Province(Grant No.2020J01873)Technology Major Project of Fujian Province(Grant No.2020H03018).
文摘Weld bead morphology plays an important role in welding procedure specification and welding process planning.In order to obtain the quantitative relationship between process parameters and weld morphology of DH36 marine steel plate,grey correlation method was used to study multiple morphology characteristics simultaneously.Eighteen experimental runs were proposed according to orthogonal method.With grey correlation theory,three response objectives,aspect ratio,depth of penetration and weld were transformed into a single grey correlation grade(GRG).The process parameters were quantitatively correlated to the GRG value and optimized with the target of maximum aspect ratio,minimum depth of penetration and maximum weld area.The results show that the optimized weld bead morphology is better than other weld bead morphology.The relative error of the predicted GRG with respect to the actual value is 5.06%,which further verifies the accuracy of the established model.The microstructure and hardness analysis suggests that the optimized welded joint has obtained required mechanical properties.The research outcomes provide a theoretical basis for multi-objective optimization of arc welding morphology in practical applications.
文摘The research investigated the corrosion of the reinjection water system to ensure the safe production of the system.By analyzing the composition of the methanol-containing wastewater,the corrosion status of the injection water system was studied by the on-site materials 20#steel,Q235B steel and L316 steel for that the methanol-containing wastewater of a natural gas processing plant in northern Shaanxi had high acidity,Cl-and sulfide contents,salinity and corrosion.Then the grey system theory modeling software 3.0 was used to study the influence degree of various corrosion factors on the corrosion rate and depth of Q235B steel.The most important factors were determined,and countermeasures against corrosion were proposed.The results showed that L316 steel was more resistant to corrosion,and the corrosion rate was 0.0015 mm/a,which was less than the national standard(0.0760 mm/a).The maximum corrosion depth was 47.63μm,which was the lowest among the three materials.The corrosion rate and depth were the parent factors.Among the four factors of sulfide,Cl-,salinity and pH,grey relational degrees of sulfide were 0.75 and 0.80,respectively,which was the most important factor causing corrosion;using sulfur corrosion inhibitor protection method,TS-792C was selected by electrochemical method from three corrosion inhibitors.The impedance data simulation software ZSimpWin was used to simulate the equivalent circuit diagram,and the impedance of Q235B steel was the largest.The corrosion inhibition rate was up to 90.26%when corrosion rate was 0.0130 mm/a under the fitting of Tafel polarization curve,with the best anti-sulfur effect.At 80℃and a sulfide content of 300 mg/L,the corrosion rate of Q235B steel was less than 0.0760 mm/a.When the added amount was 100 mg/L,the corrosion current density and corrosion rate of the reinjection sewage was 0.462 mA/cm 2 and 0.0505 mm/a,both at the lowest values and with good temperature and sulfur resistance.
基金This article belongs to the project of the“The University Synergy Innovation Program of Anhui Province(GXXT-2019-004)”“Natural Science Research Project of Anhui Universities(KJ2021ZD0144)”“Wuhu Key R&D Project:Research and Industrialization of Intelligent Control Method of Engine Energy-feeding Hydraulic Semi-Active Mount”.
文摘In order to determine the optimal structural parameters of a plastic centrifugal pump in the framework of an orthogonal-experiment approach,a numerical study of the related flow field has been performed using CFX.The thickness S,outlet angleβ2,inlet angleβ1,wrap angle,and inlet diameter D1 of the splitter blades have been considered as the variable factors,using the shaft power and efficiency of the pump as evaluation indices.Through a parametric analysis,the relative importance of the influence of each structural parameter on each evaluation index has been obtained,leading to the following combinations:β119°,β235°,S 2 mm,wrap angle 154°,and D185 mm(corresponding to the maximum efficiency of 75.48%);β119°,β220°,S 6 mm,wrap angle 158°,and D181 mm(corresponding to the minimum shaft power of 75.48%).Moreover,the grey correlation method has been applied to re-optimize the shaft power and efficiency of the pump,leading to the following optimal combination:β119°,β215°,S 4 mm,D181 mm,and wrap angle 152°(corresponding to the maximum efficiency of 71.81%and minimum shaft power of 2.187 kW).
基金Sponsored by the National Natural Science Foundation of China(Grant No.51508107)the China Postdoctoral Science Foundation(Grant No.2016M590592)the Natural Science Foundation of Fujian Province(Grant No.2015J05098)。
文摘According to the relationship between load and response, the equivalent static wind load(ESWL) of a structure can be estimated by load-response correlation(LRC) method, which can be accurately used to estimate the background ESWL of a structure. The derivation of the classical expression of LRC formula is based on a specific command response at a critical position, and the ESWL distribution has only one form in this case. In this paper, a general expression of LRC formula is derived based on a specific command response at all positions. For the general expression, ESWLs can be expressed by load-response correlation coefficients, response-response correlation coefficients, RMS values of the fluctuating wind loads, and peak factor in the form of matrices. By comparing the expressions of LRC method, it was found that the classical expression was only one form of the general one. The general expression which introduces the response-response correlation coefficients provided more options for structural engineers to estimate ESWLs and offered further insights into the LRC method. Finally, a cable-stayed bridge, a rigid three span continuous girder bridge, and a suspension bridge were used to verify the correctness of the general expression of LRC method.
基金Support for this research was provided by the National Key R&D Program of China(grant numbers 2018YFC1504203 and SQ2017YFSF040025)
文摘Seismic hazard analysis is gaining increased attention in the present era because of the catastrophic effects of earthquakes.Scientists always have as a goal to develop new techniques that will help forecast earthquakes before their reoccurrence. In this research,we have performed a shear failure experiment on rock samples with prefabricated cracks to simulate the process of plate movement that forms strike-slip faults. We studied the evolution law of the deformation field to simulate the shear failure experiment, and these results gave us a comprehensive understanding of the elaborate strain distribution law and its formation process with which to identify actual fault zones. We performed uniaxial compression tests on marble slabs with prefabricated double shear cracks to study the distribution and evolution of the deformation field during shear failure. Analysis of the strain field at different loading stages showed that with an increase in the load, the shear strain field initially changed to a disordered-style distribution. Further, the strain field was partially concentrated and finally completely concentrated near the crack and then distributed in the shape of a strip along the crack. We also computed coefficients of variation(CVs) for the physical quantities u, v, and exy, which varied with the load. The CV curves were found to correspond to the different loading stages. We found that at the uniform deformation stage, the CV value was small and changed slowly,whereas at the later nonuniform deformation stage, the CV value increased sharply and changed abruptly. Therefore, the precursor to a rock sample breakdown can be predicted by observing the variation characteristics of CV statistics. The correlation we found between our experimental and theoretical results revealed that our crack evolution and sample deformation results showed good coupling with seismic distribution characteristics near the San Andreas Fault.
文摘Under the macro background of rapid urbanization and social transformation in China,campus space renewal has become an important practice and carrier for the sustainable development of schools.The study on campus space by big data and quantitative reflection of spatial distribution of applicable people in different areas of the campus can provide a certain scientific basis for campus space updating.West campus of Yangtze University is taken as research object.Based on cognitive map method,questionnaire survey method,behavior trajectory and correlation analysis method,the types and characteristics of campus space composition,campus satisfaction,usage and its relevance are analyzed.Research results show that ①the overall imageability of campus space is higher,which has a significantly positive correlation with the satisfaction of campus environment,and has no correlation with users’ behavior activities.The use frequency of non teaching areas varies greatly in different periods of time.②The correlation between the surrounding green vegetation and the image degree of campus landmarks is the most significant,and the coefficient is 0.886.③The correlation between spatial size suitability and regional image degree is the most significant,and the coefficient is 0.937.④The correlation between public activity facilities in the region and node image degree is the most significant,and the coefficient is 0.995.According to the research results,the corresponding solutions are put forward to provide scientific and quantitative reference suggestions for the renewal and transformation of the campus.
基金supported by the National Natural Science Foundation of China(No.82204937).
文摘China is gradually establishing a multidisciplinary diagnosis and treatment system of traditional Chinese medicine(TCM)and western medicine.TCM-drug combination is prone to adverse reactions.Clinical feature is the appearance of adverse reactions,and target is the internal mechanism.The establishment of feature and target correlation model will contribute to the development of this field.This paper introduces the four steps of feature-target correlation method that risk identification,feature extraction,sign target correlation and experimental research.Xiyanping-Ribavirin combination is as an example to illustrate this method.It is expected that the method will be popularized and applied to protect clinical safety.
基金This work was supported by 985 Education Development Plan of Tianjin University
文摘We present a global optimization method, called the genetic algorithms (GAs), for digital image/speckle correlation (DISC). The new algorithms do not involve reasonable initial guess of displacement and deformation gradient and the calculation of second-order spatial derivatives of the digital images, which are important challenges in practical implementation of DISC. The performance of a GA depends largely on the selection of the genetic operators. We test various operators and propose optimal operators. The algorithms are then verified using simulated images and experimental speckle images.
基金This research was financially supported by the National Key Research and Development Program of China(Grant 2017YFB1103900)the National Science and Technology Major Project(Grant 2017-VI-0003-0073)+1 种基金the National Natural Science Foundation of China(Grant 11672153)Hubei Provincial Major Program of Technological Innovation(Grant 2017AAA121).
文摘The isotropic and anisotropic behaviors are considered as the important formats of the constitutive behaviors,and can also be called the global properties.To improve the identification ability of virtual fields method(VFM)when the global properties are unknown,this paper proposes the strain correlation method(SCM)to determine the global properties before the parameter identification using the VFM.Firstly,the basic principle of SCM is described in detail.Then,the feasibility and accuracy of SCM are verified through the numerical experiments based on the three-point bending configuration and the real experiment of polymethyl methacrylate(PMMA).The influence of the additive Gaussian white noise,local errors in the strain fields,and missing data at the specimen edges on the characterization results are evaluated.The results show that the SCM has good noise immunity and lower accuracy requirements for the strain fields.As an application,the mechanical properties of Ti-6A1-4V alloys fabricated by selective laser melting(SLM)are characterized by the SCM.The results show that the alloys are isotropic,and the isotropic VFM is utilized to determine the mechanical parameters.By using the SCM,the accuracy of identification results can be improved for the isotropic or bidirectional reinforced orthotropic materials when using VFM.
