Background: A reduced residual dentine thickness following crown preparation has a conceivable impact on pulp degeneration by increasing the pulp’s susceptibility to injury. In crown preparations, three different fin...Background: A reduced residual dentine thickness following crown preparation has a conceivable impact on pulp degeneration by increasing the pulp’s susceptibility to injury. In crown preparations, three different finishing lines are used. These are shoulder, chamfer, and knife edge. Each with its comparative advantages and disadvantages. There is inadequate scientific evidence on which of these finishing lines will leave the most amount of residual dentine, after standard crown preparations on mandibular incisors and maxillary lateral incisors to preserve their pulpal health. Objective: To evaluate residual dentine thickness following various cervical finishing lines of anterior crown preparations for zirconia full coverage. Materials and Methods: A prospective comparative study was conducted from September 2<sup>nd</sup> to November 5<sup>th</sup>, 2022, using mandibular incisors and maxillary laterals extracted from individuals between ages 18 to 30. Each of the three groups of teeth was randomly divided into three cervical margin preparations as follows: Shoulder (n = 15), chamfer (n = 15), and knife edge (n = 15). The teeth were disinfected and stored in 10% formalin. Silicone impressions followed by crown preparations were done on teeth mounted on phantom head manikins. The teeth were sectioned 0.5 mm coronal to the cemento-enamel junction using a separating disc and the mesial, distal, buccal, and lingual thickness were measured using a digital caliper. ANOVA analysis was applied to assess the difference in mean residual dentine thickness among the finishing lines and the Tukey test used for mean comparison. Results: Knife edge finishing lines had 2.05 mm of residual dentine thickness, for upper lateral incisors lingually and had an amount of 1.55 mm and 1.47 mm for lower central teeth mesially and distally respectively. Shoulder finishing lines had an amount of 0.58 mm for lower lateral incisors mesially. Interproximal areas had the least amounts of residual dentine for shoulder and chamfer finishing lines of 0.58 mm and 0.78 mm respectively. Conclusions: There was a significant statistical difference in the thickness of residual dentine at the various cervical finishing line margins. The knife edge finishing line was protective enough for zirconia crown preparations.展开更多
Background: Knife edge, chamfer, and shoulder are the three distinct finishing lines utilized in crown preparations. Each finishing line has relative benefits and drawbacks. However, not much scientific data exists re...Background: Knife edge, chamfer, and shoulder are the three distinct finishing lines utilized in crown preparations. Each finishing line has relative benefits and drawbacks. However, not much scientific data exists regarding which of these finishing lines will leave the most amount of residual dentine coronally on maxillary lateral incisors and mandibular incisors. Objective: To assess the coronal residual dentine thickness after different cervical finishing lines for anterior crown preparations. Materials and Methods: A prospective comparative study was conducted including mandibular incisors and maxillary laterals that were taken from subjects from 18 to 30 years old. Teeth in each of the three groups were randomly separated into three cervical margin preparation groups: knife edge, chamfer and shoulder. The teeth were then prepared for single crown coverage using these finishing lines. The teeth were sectioned halfway through the crown preparation, and a digital caliper was used to determine the residual dentine thickness at the buccal, lingual, mesial and distal areas. The Tukey test was used for mean comparison, and ANOVA analysis was used to evaluate the variation in mean residual dentine thickness. Results: For upper lateral incisors, knife edge finishing lines showed the highest amount of remaining dentine thickness—1.5 mm. lingually, while the upper lateral incisors mesially had the least amount of 0.53 mm for shoulder finishing lines. The least residual dentine (0.53 mm for the shoulder and 0.70 mm for the chamfer finishing line) was found in the interproximal portions of all the teeth that were selected. Lower central incisors had the least amount of residual dentine 0.61 mm for shoulder preparations mesially whiles lower lateral incisors had the least amount of residual dentine for shoulder preparations 0.58 mm distally. There was a statistically significant difference of 0.001 across the groups. Conclusion: The thickness of residual dentine seen coronally after the three finishing line preparations showed a statistically significant difference and the knife edge finishing line provided enough coronal protection within the scope of this study.展开更多
Aims: to determine the prevalence of gingival recession and dentine hypersensitivity among the study population, and evaluate the distribution of dentine hypersensitivity among various types of teeth in mild, moderate...Aims: to determine the prevalence of gingival recession and dentine hypersensitivity among the study population, and evaluate the distribution of dentine hypersensitivity among various types of teeth in mild, moderate and severe degrees of gingival recession. Relationship between the severity of gingival recession and dentine hypersensitivity was also evaluated. Materials and Methods: Clinical examination was conducted on six hundred and seventy-six patients (283 males and 393 females). Their ages ranged from 18 to 74 years old (mean 35.4, SD = 11.2). A valid and reliable questionnaire was filled by the participated patients. Results: The prevalence of gingival recession was 79.0%, and the prevalence of dentine hypersensitivity within the patients with gingival recession was 23.6%. The most common teeth affected by dentine hypersensitivity were the lower incisors. Dentine hypersensitivity was more commonly found in teeth with mild recession. Conclusion: Increased gingival recession does not necessarily mean increased incidence of dentine hypersensitivity.展开更多
Dentine hypersensitivity is an annoying worldwide disease,yet its mechanism remains unclear.The long-used hydrodynamic theory,a stimuli-induced fluid-flow process,describes the pain processes.However,no experimental e...Dentine hypersensitivity is an annoying worldwide disease,yet its mechanism remains unclear.The long-used hydrodynamic theory,a stimuli-induced fluid-flow process,describes the pain processes.However,no experimental evidence supports the statements.Here,we demonstrate that stimuli-induced directional cation transport,rather than fluid-flow,through dentinal tubules actually leads to dentine hypersensitivity.The in vitro/in vivo electro-chemical and electro-neurophysiological approaches reveal the cation current through the nanoconfined negatively charged dentinal tubules coming from external stimuli(pressure,pH,and temperature)on dentin surface and further triggering the nerve impulses causing the dentine hypersensitivity.Furthermore,the cationic-hydrogels blocked dentinal tubules could significantly reduce the stimuli-triggered nerve action potentials and the anionhydrogels counterpart enhances those,supporting the cation-flow transducing dentine hypersensitivity.Therefore,the inspired ion-blocking desensitizing therapies have achieved remarkable pain relief in clinical applications.The proposed mechanism would enrich the basic knowledge of dentistry and further foster breakthrough initiatives in hypersensitivity mitigation and cure.展开更多
The aim of this study was to investigate the influence of ethylenediaminetetraacetic acid （EDTA） irrigation on demineralization rate of dentine located in the apical third of root canal walls. Teeth were divided int...The aim of this study was to investigate the influence of ethylenediaminetetraacetic acid （EDTA） irrigation on demineralization rate of dentine located in the apical third of root canal walls. Teeth were divided into A and B two groups. In group A, all of the teeth was irrigated with EDTA and NaOCI （sodium hypochlorite）, followed by cutting the apical third into slices longitudinally to examine the influence of EDTA on different portions of apical third of root canal. In group B, the apical third of a tooth was firstly cut into slices longitudinally, followed by coating the root canal walls with EDTA to in-situ observe the demineralization of dentine with different time. It was found that the influence of EDTA on root-canal was gradually increased from the apical to the upper end of the apical third for group A. In addition, the demineralization rate of dentine was remarkable in the first 25 min for group B. The diffusion of EDTA into root dentine would lead to potential damage to the dentine. Furthermore, demineralization rate curve was calculated.展开更多
Necropsies and extensive histological evaluation for clinical and sub-clinical disease of approximately three hundred Portuguese Water dogs are available as part of an ongoing study to assess their state of health at ...Necropsies and extensive histological evaluation for clinical and sub-clinical disease of approximately three hundred Portuguese Water dogs are available as part of an ongoing study to assess their state of health at the end of life. Throughout life these dogs enjoyed a variety of lifestyles and environments. Here we carry out retrospective quantitative assessments of life-time dietary input and physical activity for each dog. To do this, collagens from skull vault bone and from dentine have been analyzed for ratios of stable isotopes to determine differences in diet that individual dogs experienced during late or early life respectively. Robustness of skull bone (weight/unit of skull size) was used as a relative indicator of the amount of physical activity experienced during a dog’s lifetime. These environmental parameters were correlated with the frequency and severity of specific disease processes determined at necropsy. Both measures were shown to exert significant low-level展开更多
The effects of occlusion of dentinal tubuls Im a Chinese traditional medicine Complex Gao Liang Jiang Paste were evaluated using scanning electron microscope and Oc-clusion of dentinal tubules occurred of after treatm...The effects of occlusion of dentinal tubuls Im a Chinese traditional medicine Complex Gao Liang Jiang Paste were evaluated using scanning electron microscope and Oc-clusion of dentinal tubules occurred of after treatment with the preparation for 5 mm ohstructed after 10 min and complete occlusion after 20 min. In order to get ideal result the be lengthened when the paste is used.展开更多
Stem cells are pluripotent cells, having a property of differentiating into various types of cells of human body. Several studies have developed mesenchymal stem cells(MSCs) from various human tissues,peripheral blood...Stem cells are pluripotent cells, having a property of differentiating into various types of cells of human body. Several studies have developed mesenchymal stem cells(MSCs) from various human tissues,peripheral blood and body fluids. These cells are then characterized by cellular and molecular markers to understand their specific phenotypes. Dental pulp stem cells(DPSCs) are having a MSCs phenotype and they are differentiated into neuron, cardiomyocytes, chondrocytes, osteoblasts, liver cells and β cells of islet of pancreas. Thus, DPSCs have shown great potentiality to use in regenerative medicine for treatment of various human diseases including dental related problems. These cells can also be developed into induced pluripotent stem cells by incorporation of pluripotency markers and use for regenerative therapies of various diseases. The DPSCs are derived from various dental tissues such as human exfoliated deciduous teeth, apical papilla, periodontal ligament and dental follicle tissue. This review will overview the information about isolation, cellular and molecular characterization and differentiation of DPSCs into various types of human cells and thus these cells have important applications in regenerative therapies for various diseases. This review will be most useful for postgraduate dental students as well as scientists working in the field of oral pathology and oral medicine.展开更多
The tooth root cementum is a thin, mineralized tissue covering the root dentin that is present primarily as acellular cementum on the cervical root and cellular cementum covering the apical root. While cementum shares...The tooth root cementum is a thin, mineralized tissue covering the root dentin that is present primarily as acellular cementum on the cervical root and cellular cementum covering the apical root. While cementum shares many properties in common with bone and dentin, it is a unique mineralized tissue and acellular cementum is critical for attachment of the tooth to the surrounding periodontal ligament （PDL）. Resources for methodologies for hard tissues often overlook cementum and approaches that may be of value for studying this tissue. To address this issue, this report offers detailed methodology, as well as comparisons of several histological and immunohistochemical stains available for imaging the cementum-PDL complex by light microscopy. Notably, the infrequently used Alcian blue stain with nuclear fast red counterstain provided utility in imaging cementum in mouse, porcine and human teeth. While no truly unique extracellular matrix markers have been identified to differentiate cementum from the other hard tissues, immunohistochemistry for detection of bone sialoprotein （BSP）, osteopontin （OPN）, and dentin matrix protein 1 （DMP1） is a reliable approach for studying both acellular and cellular cementum and providing insight into developmental biology of these tissues. Histoloeical and immunohistochemical aooroaches Drovide insight on developmental biology of cementum.展开更多
Our previous studies showed that biomodification of demineralized dentin collagen with proanthocyanidin（PA） for a clinically practical duration improves the mechanical properties of the dentin matrix and the immedia...Our previous studies showed that biomodification of demineralized dentin collagen with proanthocyanidin（PA） for a clinically practical duration improves the mechanical properties of the dentin matrix and the immediate resin–dentin bond strength. The present study sought to evaluate the ability of PA biomodification to reduce collagenase-induced biodegradation of demineralized dentin matrix and dentin/adhesive interfaces in a clinically relevant manner. The effects of collagenolytic and gelatinolytic activity on PA-biomodified demineralized dentin matrix were analysed by hydroxyproline assay and gelatin zymography. Then, resin-/dentin-bonded specimens were prepared and challenged with bacterial collagenases. Dentin treated with 2% chlorhexidine and untreated dentin were used as a positive and negative control, respectively. Collagen biodegradation, the microtensile bond strengths of bonded specimens and the micromorphologies of the fractured interfaces were assessed. The results revealed that both collagenolytic and gelatinolytic activity on demineralized dentin were notably inhibited in the PA-biomodified groups, irrespective of PA concentration and biomodification duration. When challenged with exogenous collagenases, PA-biomodified bonded specimens exhibited significantly less biodegradation and maintained higher bond strengths than the untreated control. These results suggest that PA biomodification was effective at inhibiting proteolytic activity on demineralized dentin matrix and at stabilizing the adhesive/dentin interface against enzymatic degradation, is a new concept that has the potential to improve bonding durability.展开更多
‘Bronze teeth＇ reflect the mechanical properties of natural teeth to a certain extent. Their mechanical properties resemble those of a tough metal, and the gradient of these properties lies in the direction from out...‘Bronze teeth＇ reflect the mechanical properties of natural teeth to a certain extent. Their mechanical properties resemble those of a tough metal, and the gradient of these properties lies in the direction from outside to inside. These attributes confer human teeth with effective mastication ability. Understanding the various mechanical properties of human teeth and dental materials is the basis for the development of restorative materials. In this study, the elastic properties, dynamic mechanical properties （visco-elasticity） and fracture mechanical properties of enamel and dentin were reviewed to provide a more thorough understanding of the mechanical properties of human teeth.展开更多
Phosphophoryn (PP) and dentin sialoprotein (DSP) are the most dominant non-collagenous proteins in dentin. PP is an extremely acidic protein that can function as a mineral nucleator for dentin mineralization. DSP was ...Phosphophoryn (PP) and dentin sialoprotein (DSP) are the most dominant non-collagenous proteins in dentin. PP is an extremely acidic protein that can function as a mineral nucleator for dentin mineralization. DSP was first identified in 1981, yet its functional significance is still controversial. Historically, these two proteins were considered to be independently synthesized and secreted by dental pulp cells into the developing dentin matrix. However, with the identification of the DSP coding sequence in 1994, followed2 years later by the finding that the PP coding sequence was located immediately downstream from the DSP sequence, it became immediately clear that DSP and PP proteins were derived from a single DSP-PP (i.e., dentin sialophosphoprotein, DSPP) transcript.Since DSPP cDNA became available, tremendous progress has been made in studying DSP-PP mRNA distribution and DSP generation from the DSP-PP precursor protein at specific cleavage sites by protease tolloid-related-1 (TLR1) or bone morphogenetic protein 1 (BMP1). The functions of DSP-PP and DSP were investigated via DSP-PP knockout (KO) and DSP knockin in DSP-PP KO mice. In addition, a number of in vitro studies aimed to elucidate DSPP and DSP function in dental pulp cells.展开更多
Antibacterial dimethylaminododecyl methacrylate （DMADDM） was recently synthesized. The objectives of this study were to： （1） investigate antibacterial activity of DMADDM-containing primer on Streptococcus mutans ...Antibacterial dimethylaminododecyl methacrylate （DMADDM） was recently synthesized. The objectives of this study were to： （1） investigate antibacterial activity of DMADDM-containing primer on Streptococcus mutans impregnated into dentin blocks for the first time, and （2） compare the antibacterial efficacy of DMADDM with a previous quaternary ammonium dimethacrylate （QADM）. Scotchbond Multi-Purpose （SBMP） bonding agent was used. DMADDM and QADM were mixed into SBMP primer. Six primers were tested： SBMP control primer P, P＋2.5% DMADDM, P＋5% DMADDM, P＋7.5% DMADDM, P＋10% DMADDM, and P＋10% QADM. S. mutans were impregnated into human dentin blocks, and each primer was applied to dentin to test its ability to kill bacteria in dentinal tubules. Bacteria in dentin were collected via a sonication method, and the colony-forming units （CFU） and inhibition zones were measured. The bacterial inhibition zone of P＋10% DMADDM was 10 times that of control primer （P〈0.05）. CFU in dentin with P＋10% DMADDM was reduced by three orders of magnitude, compared with control. DMADDM had a much stronger antibacterial effect than QADM, and antibacterial efficacy increased with increasing DMADDM concentration. Dentin shear bond strengths were similar among all groups （P〉0.1）. In conclusion, antibacterial DMADDM-containing primer was validated to kill bacteria inside dentin blocks, possessing a much stronger antibacterial potency than the previous QADM. DMADDM-containing bonding agent was effective in eradicating bacteria in dentin, and its efficacy was directly proportional to DMADDM mass fraction. Therefore, DMADDM may be promisine for use in bonding agents as well as in other restorative and oreventive materials to inhibit bacteria.展开更多
To verify the theoretical models of varying transversely isotropic stress-strain relations of dentin established in the preceding work(Part Ⅰ),we per- form a set of experiments.Because of the very fine tooth size,it ...To verify the theoretical models of varying transversely isotropic stress-strain relations of dentin established in the preceding work(Part Ⅰ),we per- form a set of experiments.Because of the very fine tooth size,it usually seems to be difficult to directly measure the inhomogeneous and anisotropic parameters of dentin.In this paper,by the digital speckle correlation method,tensile experiments are made on the small dentin samples either parallel or perpendicular to the dentin tubules.With the theoretically predicted elastic stress-strain relations,an optimiza- tion method is proposed to fit the strain curve adapted to the experimental data. The results show that the theoretical elastic stress-strain relations coincides very well with the experimental observations.The determined Young's modulus and Poisson's ratio of dentin matrix are 29.5GPa and 0.44,respectively,in the optimization sense.展开更多
Tooth decay is prevalent,and secondary caries causes restoration failures,both of which are related to demineralization.There is an urgent need to develop new therapeutic materials with remineralization functions.This...Tooth decay is prevalent,and secondary caries causes restoration failures,both of which are related to demineralization.There is an urgent need to develop new therapeutic materials with remineralization functions.This article represents the first review on the cutting edge research of poly(amido amine)(PAMAM) in combination with nanoparticles of amorphous calcium phosphate (NACP).PAMAM was excellent nucleation template,and could absorb calcium (Ca) and phosphate (P) ions via its functional groups to activate remineralization.NACP composite and adhesive showed acid-neutralization and Ca and P ion release capabilities.PAMAM +NACP together showed synergistic effects and produced triple benefits: excellent nucleation templates,superior acidneutralization,and ions release.Therefore,the PAMAM+NACP strategy possessed much greater remineralization capacity than using PAMAM or NACP alone.PAMAM+NACP achieved dentin remineralization even in an acidic solution without any initial Ca and P ions.Besides,the long-term remineralization capability of PAMAM+NACP was established.After prolonged fluid challenge,the immersed PAMAM with the recharged NACP still induced effective dentin mineral regeneration.Furthermore,the hardness of predemineralized dentin was increased back to that of healthy dentin,indicating a complete remineralization.Therefore,the novel PAMAM+NACP approach is promising to provide long-term therapeutic effects including tooth remineralization,hardness increase,and caries-inhibition capabilities.展开更多
Objective To investigate the effect of multiple coatings of the one-step self-etching adhesive on immediate microtensile bond strength to primary dentin.Methods Twelve caries-free human primary molars were randomly di...Objective To investigate the effect of multiple coatings of the one-step self-etching adhesive on immediate microtensile bond strength to primary dentin.Methods Twelve caries-free human primary molars were randomly divided into 2 groups with 6 teeth each.In group 1,each tooth was hemisected into two halves.One half was assigned to control subgroup 1,which was bonded with a single-step self-etching adhesive according to the manufacturer's instructions;the other half was assigned to experimental subgroup 1 in which the adhesive was applied three times before light curing.In group 2,the teeth were also hemisected into two halves.One half was assigned to control subgroup 2,which was bonded with the single-step self-etching adhesive according to the manufacturer's instructions;the other half was assigned to experimental subgroup 2 in which three layers of adhesive were applied with light curing each successive layer.Microtensile bond strength was immediately tested after specimen preparation.Results When the adhesive was applied three times before light curing,the bond strength of the experimental subgroup 1(n=33,57.49±11.61 MPa) was higher than that of the control subgroup 1(n=31,49.71±11.43 MPa,P<0.05).When using the technique of applying multiple layers of adhesive with light curing each successive layer,no difference of immediate bond strength was observed between the control subgroup 2 and the experimental subgroup 2(P>0.05).Conclusion Multiple coatings of one-step self-etching adhesive can increase the immediate bond strength to primary dentin when using the technique of light-curing after applying three layers of adhesive.展开更多
AIM: To systematically review the literature on the efficacy of noninvasive methods of arresting the progression of non-cavitated occlusal carious lesions in dentin.METHODS: The Medline/Pub Med,LILACS,Sci ELO and Scop...AIM: To systematically review the literature on the efficacy of noninvasive methods of arresting the progression of non-cavitated occlusal carious lesions in dentin.METHODS: The Medline/Pub Med,LILACS,Sci ELO and Scopus databases were searched to identify relevant publications through to November 2013.Only clinical trials evaluating the ability of noninvasive methods to arrest the progression of occlusal non-cavitated carious lesions in dentin were included.Screening,data extraction and quality assessment were conducted independently and in duplicate.RESULTS: Of 167 citations identified,nine full text articles were screened and five were included in the analysis.All papers reported on occlusal fissure sealing using a self-curing glass ionomer(n = 1) or resin-based(n = 4) sealant.Only the use of resin-based sealant to obliterate occlusal fissures arrested the progression of non-cavitated occlusal carious lesions in dentin.CONCLUSION: Occlusal fissure sealing with a resin-based sealant may arrest the progression of non-cavitated occlusal dentinal caries.Further clinical trials with longer follow-up times should be performed to increase scientific evidence.展开更多
Deletion or mutation of dentin matrix protein 1 （DMP1） leads to hypophosphatemic rickets and defects within the dentin. However, it is largely unknown if this pathological change is a direct role of DMP1 or an indir...Deletion or mutation of dentin matrix protein 1 （DMP1） leads to hypophosphatemic rickets and defects within the dentin. However, it is largely unknown if this pathological change is a direct role of DMP1 or an indirect role of phosphate （Pi） or both. It has also been previously shown that Klotho-deficient mice, which displayed a high Pi level due to a failure of Pi excretion, causes mild defects in the dentinal structure. This study was to address the distinct roles of DMP1 and Pi homeostasis in cell differentiation, apoptosis and mineralization of dentin and enamel. Our working hypothesis was that a stable Pi homeostasis is critical for postnatal tooth formation, and that DMP1 has an antiapoptotic role in both amelogenesis and dentinogenesis. To test this hypothesis, Dmpl-null （Dmpl-/-）, Klotho-deficient （kl/kl）, Dmpl/Klotho-double-deficient （Dmpl-/-/kl/kl） and wild-type （WT） mice were killed at the age of 6 weeks. Combinations of X-ray, microcomputed tomography （I^CT）, scanning electron microscopy （SEM）, histology, apoptosis and immunohistochemical methods were used for characterization of dentin, enamel and pulp structures in these mutant mice. Our results showed that Dmpl-/- （a low Pi level） or kl/kl（a high Pi level） mice displayed mild dentin defects such as thin dentin and a reduction of dentin tubules. Neither deficient mouse line exhibited any apparent changes in enamel or pulp structure. However, the double-deficient mice （a high Pi level） displayed severe defects in dentin and enamel structures, including loss of dentinal tubules and enamel prisms, as well as unexpected ectopic ossification within the pulp root canal. TUNEL assay showed a sharp increase in apoptotic cells in ameloblasts and odontoblasts. Based on the above findings, we conclude that DMP1 has a protective role for odontoblasts and ameloblasts in a pro-apoptotic environment （a high Pi level）.展开更多
As known, there is a large number of dentin tubules in dentin. These tubules have varying radii and are shaped into radially parallel pattern. The anisotropy of microstructure of dentin shows that dentin should be tre...As known, there is a large number of dentin tubules in dentin. These tubules have varying radii and are shaped into radially parallel pattern. The anisotropy of microstructure of dentin shows that dentin should be treated as a ma- terial of varying transverse isotropy. In this Part, the elastic stress-strain relations and the quadratic strength criterion are established in the form of having varying transverse isotropy, in the framework of micromechanics to take into account of the effect of the microstructures-dentin tubules. Simplified forms for isotropic and ho- mogeneous cases, as well as the corresponding plane stress form of the stress-strain relations are also given. These theoretical models are very well supported by the experiments shown later in the continued paper (Part Ⅱ).展开更多
In this study, we employed a nonthermal atmospheric pressure plasma(NTAPP) jet to evaluate the effect of plasma treatment on the durability of resin–dentin bonding under a thermocycling challenge. Furthermore, we ass...In this study, we employed a nonthermal atmospheric pressure plasma(NTAPP) jet to evaluate the effect of plasma treatment on the durability of resin–dentin bonding under a thermocycling challenge. Furthermore, we assessed the degradation resistance of plasma-treated collagen under a sodium hypochlorite(NaClO) challenge. We assessed the beneficial effect of NTAPP treatment on the acid-etched dentin–bonding interface by testing the micro-tensile bond strength and examining the morphology. We found that the immediate bonding strength of the dentin significantly increased after NTAPP treatment. Compared with the control group, NTAPP resulted in a more prominent effect on the bonding durability of the dentin–adhesive interface after treatment for 5 or 10 s. Simultaneously, the mechanical strength of dentin collagen under the NaClO challenge was improved. Our results indicate that, in optimal conditions, NTAPP could be a promising method to protect dentin collagen and to improve the bonding durability between dentin and etch-and-rinse adhesives.展开更多
文摘Background: A reduced residual dentine thickness following crown preparation has a conceivable impact on pulp degeneration by increasing the pulp’s susceptibility to injury. In crown preparations, three different finishing lines are used. These are shoulder, chamfer, and knife edge. Each with its comparative advantages and disadvantages. There is inadequate scientific evidence on which of these finishing lines will leave the most amount of residual dentine, after standard crown preparations on mandibular incisors and maxillary lateral incisors to preserve their pulpal health. Objective: To evaluate residual dentine thickness following various cervical finishing lines of anterior crown preparations for zirconia full coverage. Materials and Methods: A prospective comparative study was conducted from September 2<sup>nd</sup> to November 5<sup>th</sup>, 2022, using mandibular incisors and maxillary laterals extracted from individuals between ages 18 to 30. Each of the three groups of teeth was randomly divided into three cervical margin preparations as follows: Shoulder (n = 15), chamfer (n = 15), and knife edge (n = 15). The teeth were disinfected and stored in 10% formalin. Silicone impressions followed by crown preparations were done on teeth mounted on phantom head manikins. The teeth were sectioned 0.5 mm coronal to the cemento-enamel junction using a separating disc and the mesial, distal, buccal, and lingual thickness were measured using a digital caliper. ANOVA analysis was applied to assess the difference in mean residual dentine thickness among the finishing lines and the Tukey test used for mean comparison. Results: Knife edge finishing lines had 2.05 mm of residual dentine thickness, for upper lateral incisors lingually and had an amount of 1.55 mm and 1.47 mm for lower central teeth mesially and distally respectively. Shoulder finishing lines had an amount of 0.58 mm for lower lateral incisors mesially. Interproximal areas had the least amounts of residual dentine for shoulder and chamfer finishing lines of 0.58 mm and 0.78 mm respectively. Conclusions: There was a significant statistical difference in the thickness of residual dentine at the various cervical finishing line margins. The knife edge finishing line was protective enough for zirconia crown preparations.
文摘Background: Knife edge, chamfer, and shoulder are the three distinct finishing lines utilized in crown preparations. Each finishing line has relative benefits and drawbacks. However, not much scientific data exists regarding which of these finishing lines will leave the most amount of residual dentine coronally on maxillary lateral incisors and mandibular incisors. Objective: To assess the coronal residual dentine thickness after different cervical finishing lines for anterior crown preparations. Materials and Methods: A prospective comparative study was conducted including mandibular incisors and maxillary laterals that were taken from subjects from 18 to 30 years old. Teeth in each of the three groups were randomly separated into three cervical margin preparation groups: knife edge, chamfer and shoulder. The teeth were then prepared for single crown coverage using these finishing lines. The teeth were sectioned halfway through the crown preparation, and a digital caliper was used to determine the residual dentine thickness at the buccal, lingual, mesial and distal areas. The Tukey test was used for mean comparison, and ANOVA analysis was used to evaluate the variation in mean residual dentine thickness. Results: For upper lateral incisors, knife edge finishing lines showed the highest amount of remaining dentine thickness—1.5 mm. lingually, while the upper lateral incisors mesially had the least amount of 0.53 mm for shoulder finishing lines. The least residual dentine (0.53 mm for the shoulder and 0.70 mm for the chamfer finishing line) was found in the interproximal portions of all the teeth that were selected. Lower central incisors had the least amount of residual dentine 0.61 mm for shoulder preparations mesially whiles lower lateral incisors had the least amount of residual dentine for shoulder preparations 0.58 mm distally. There was a statistically significant difference of 0.001 across the groups. Conclusion: The thickness of residual dentine seen coronally after the three finishing line preparations showed a statistically significant difference and the knife edge finishing line provided enough coronal protection within the scope of this study.
文摘Aims: to determine the prevalence of gingival recession and dentine hypersensitivity among the study population, and evaluate the distribution of dentine hypersensitivity among various types of teeth in mild, moderate and severe degrees of gingival recession. Relationship between the severity of gingival recession and dentine hypersensitivity was also evaluated. Materials and Methods: Clinical examination was conducted on six hundred and seventy-six patients (283 males and 393 females). Their ages ranged from 18 to 74 years old (mean 35.4, SD = 11.2). A valid and reliable questionnaire was filled by the participated patients. Results: The prevalence of gingival recession was 79.0%, and the prevalence of dentine hypersensitivity within the patients with gingival recession was 23.6%. The most common teeth affected by dentine hypersensitivity were the lower incisors. Dentine hypersensitivity was more commonly found in teeth with mild recession. Conclusion: Increased gingival recession does not necessarily mean increased incidence of dentine hypersensitivity.
基金We thank the National Key R&D Program of China(No.2020YFA0710401)the National Natural Science Foundation of China(Nos.82225012,81922019,82071161,81991505,22122207,21988102,and 52075138)+1 种基金the Young Elite Scientist Sponsorship Program by CAST(No.2020QNRC001)the Beijing Nova Program(No.211100002121013).
文摘Dentine hypersensitivity is an annoying worldwide disease,yet its mechanism remains unclear.The long-used hydrodynamic theory,a stimuli-induced fluid-flow process,describes the pain processes.However,no experimental evidence supports the statements.Here,we demonstrate that stimuli-induced directional cation transport,rather than fluid-flow,through dentinal tubules actually leads to dentine hypersensitivity.The in vitro/in vivo electro-chemical and electro-neurophysiological approaches reveal the cation current through the nanoconfined negatively charged dentinal tubules coming from external stimuli(pressure,pH,and temperature)on dentin surface and further triggering the nerve impulses causing the dentine hypersensitivity.Furthermore,the cationic-hydrogels blocked dentinal tubules could significantly reduce the stimuli-triggered nerve action potentials and the anionhydrogels counterpart enhances those,supporting the cation-flow transducing dentine hypersensitivity.Therefore,the inspired ion-blocking desensitizing therapies have achieved remarkable pain relief in clinical applications.The proposed mechanism would enrich the basic knowledge of dentistry and further foster breakthrough initiatives in hypersensitivity mitigation and cure.
基金the financial support of the project from the Foundation of the Education Department of Liaoning Province(Grant No.L2013285)Science and Technology Planning Project of Shenyang City(Grant No.F11262-9-16)
文摘The aim of this study was to investigate the influence of ethylenediaminetetraacetic acid （EDTA） irrigation on demineralization rate of dentine located in the apical third of root canal walls. Teeth were divided into A and B two groups. In group A, all of the teeth was irrigated with EDTA and NaOCI （sodium hypochlorite）, followed by cutting the apical third into slices longitudinally to examine the influence of EDTA on different portions of apical third of root canal. In group B, the apical third of a tooth was firstly cut into slices longitudinally, followed by coating the root canal walls with EDTA to in-situ observe the demineralization of dentine with different time. It was found that the influence of EDTA on root-canal was gradually increased from the apical to the upper end of the apical third for group A. In addition, the demineralization rate of dentine was remarkable in the first 25 min for group B. The diffusion of EDTA into root dentine would lead to potential damage to the dentine. Furthermore, demineralization rate curve was calculated.
文摘Necropsies and extensive histological evaluation for clinical and sub-clinical disease of approximately three hundred Portuguese Water dogs are available as part of an ongoing study to assess their state of health at the end of life. Throughout life these dogs enjoyed a variety of lifestyles and environments. Here we carry out retrospective quantitative assessments of life-time dietary input and physical activity for each dog. To do this, collagens from skull vault bone and from dentine have been analyzed for ratios of stable isotopes to determine differences in diet that individual dogs experienced during late or early life respectively. Robustness of skull bone (weight/unit of skull size) was used as a relative indicator of the amount of physical activity experienced during a dog’s lifetime. These environmental parameters were correlated with the frequency and severity of specific disease processes determined at necropsy. Both measures were shown to exert significant low-level
文摘The effects of occlusion of dentinal tubuls Im a Chinese traditional medicine Complex Gao Liang Jiang Paste were evaluated using scanning electron microscope and Oc-clusion of dentinal tubules occurred of after treatment with the preparation for 5 mm ohstructed after 10 min and complete occlusion after 20 min. In order to get ideal result the be lengthened when the paste is used.
基金Supported by Jaslok Hospital and Research Centre,Mumbai,India,Project ni491,A/C 27814
文摘Stem cells are pluripotent cells, having a property of differentiating into various types of cells of human body. Several studies have developed mesenchymal stem cells(MSCs) from various human tissues,peripheral blood and body fluids. These cells are then characterized by cellular and molecular markers to understand their specific phenotypes. Dental pulp stem cells(DPSCs) are having a MSCs phenotype and they are differentiated into neuron, cardiomyocytes, chondrocytes, osteoblasts, liver cells and β cells of islet of pancreas. Thus, DPSCs have shown great potentiality to use in regenerative medicine for treatment of various human diseases including dental related problems. These cells can also be developed into induced pluripotent stem cells by incorporation of pluripotency markers and use for regenerative therapies of various diseases. The DPSCs are derived from various dental tissues such as human exfoliated deciduous teeth, apical papilla, periodontal ligament and dental follicle tissue. This review will overview the information about isolation, cellular and molecular characterization and differentiation of DPSCs into various types of human cells and thus these cells have important applications in regenerative therapies for various diseases. This review will be most useful for postgraduate dental students as well as scientists working in the field of oral pathology and oral medicine.
基金supported (in part) by the Intramural Research Program of the National Institute of Arthritis and Musculoskeletal and Skin Diseases of the National Institutes of Health
文摘The tooth root cementum is a thin, mineralized tissue covering the root dentin that is present primarily as acellular cementum on the cervical root and cellular cementum covering the apical root. While cementum shares many properties in common with bone and dentin, it is a unique mineralized tissue and acellular cementum is critical for attachment of the tooth to the surrounding periodontal ligament （PDL）. Resources for methodologies for hard tissues often overlook cementum and approaches that may be of value for studying this tissue. To address this issue, this report offers detailed methodology, as well as comparisons of several histological and immunohistochemical stains available for imaging the cementum-PDL complex by light microscopy. Notably, the infrequently used Alcian blue stain with nuclear fast red counterstain provided utility in imaging cementum in mouse, porcine and human teeth. While no truly unique extracellular matrix markers have been identified to differentiate cementum from the other hard tissues, immunohistochemistry for detection of bone sialoprotein （BSP）, osteopontin （OPN）, and dentin matrix protein 1 （DMP1） is a reliable approach for studying both acellular and cellular cementum and providing insight into developmental biology of these tissues. Histoloeical and immunohistochemical aooroaches Drovide insight on developmental biology of cementum.
基金supported by research funds from the Natural Science Foundation of China (No. 81130078 and No. 81000458)Program for Changjiang Scholars and Innovative Research Team in University (No. IRT13051)
文摘Our previous studies showed that biomodification of demineralized dentin collagen with proanthocyanidin（PA） for a clinically practical duration improves the mechanical properties of the dentin matrix and the immediate resin–dentin bond strength. The present study sought to evaluate the ability of PA biomodification to reduce collagenase-induced biodegradation of demineralized dentin matrix and dentin/adhesive interfaces in a clinically relevant manner. The effects of collagenolytic and gelatinolytic activity on PA-biomodified demineralized dentin matrix were analysed by hydroxyproline assay and gelatin zymography. Then, resin-/dentin-bonded specimens were prepared and challenged with bacterial collagenases. Dentin treated with 2% chlorhexidine and untreated dentin were used as a positive and negative control, respectively. Collagen biodegradation, the microtensile bond strengths of bonded specimens and the micromorphologies of the fractured interfaces were assessed. The results revealed that both collagenolytic and gelatinolytic activity on demineralized dentin were notably inhibited in the PA-biomodified groups, irrespective of PA concentration and biomodification duration. When challenged with exogenous collagenases, PA-biomodified bonded specimens exhibited significantly less biodegradation and maintained higher bond strengths than the untreated control. These results suggest that PA biomodification was effective at inhibiting proteolytic activity on demineralized dentin matrix and at stabilizing the adhesive/dentin interface against enzymatic degradation, is a new concept that has the potential to improve bonding durability.
基金support from the National Natural Science Foundation of China(Nos.81170996,81070867 and 81100777)the Sichuan Province Science and Technology Innovation Team Program(2011JTD0006)
文摘‘Bronze teeth＇ reflect the mechanical properties of natural teeth to a certain extent. Their mechanical properties resemble those of a tough metal, and the gradient of these properties lies in the direction from outside to inside. These attributes confer human teeth with effective mastication ability. Understanding the various mechanical properties of human teeth and dental materials is the basis for the development of restorative materials. In this study, the elastic properties, dynamic mechanical properties （visco-elasticity） and fracture mechanical properties of enamel and dentin were reviewed to provide a more thorough understanding of the mechanical properties of human teeth.
文摘Phosphophoryn (PP) and dentin sialoprotein (DSP) are the most dominant non-collagenous proteins in dentin. PP is an extremely acidic protein that can function as a mineral nucleator for dentin mineralization. DSP was first identified in 1981, yet its functional significance is still controversial. Historically, these two proteins were considered to be independently synthesized and secreted by dental pulp cells into the developing dentin matrix. However, with the identification of the DSP coding sequence in 1994, followed2 years later by the finding that the PP coding sequence was located immediately downstream from the DSP sequence, it became immediately clear that DSP and PP proteins were derived from a single DSP-PP (i.e., dentin sialophosphoprotein, DSPP) transcript.Since DSPP cDNA became available, tremendous progress has been made in studying DSP-PP mRNA distribution and DSP generation from the DSP-PP precursor protein at specific cleavage sites by protease tolloid-related-1 (TLR1) or bone morphogenetic protein 1 (BMP1). The functions of DSP-PP and DSP were investigated via DSP-PP knockout (KO) and DSP knockin in DSP-PP KO mice. In addition, a number of in vitro studies aimed to elucidate DSPP and DSP function in dental pulp cells.
基金supported by NIH R01 DE17974 (Hockin HK Xu)a scholarship from West China School of Stomatology (Chen Chen)+3 种基金Program for New Century Excellent Talents in University (Lei Cheng)Youth Grant of Science and Technology Department of Sichuan Province China (2014JQ0033) (Lei Cheng)a bridge fund from University of Maryland Baltimore School of Dentistry (Hockin HK Xu)a seed grant from University of Maryland Baltimore (Hockin HK Xu)
文摘Antibacterial dimethylaminododecyl methacrylate （DMADDM） was recently synthesized. The objectives of this study were to： （1） investigate antibacterial activity of DMADDM-containing primer on Streptococcus mutans impregnated into dentin blocks for the first time, and （2） compare the antibacterial efficacy of DMADDM with a previous quaternary ammonium dimethacrylate （QADM）. Scotchbond Multi-Purpose （SBMP） bonding agent was used. DMADDM and QADM were mixed into SBMP primer. Six primers were tested： SBMP control primer P, P＋2.5% DMADDM, P＋5% DMADDM, P＋7.5% DMADDM, P＋10% DMADDM, and P＋10% QADM. S. mutans were impregnated into human dentin blocks, and each primer was applied to dentin to test its ability to kill bacteria in dentinal tubules. Bacteria in dentin were collected via a sonication method, and the colony-forming units （CFU） and inhibition zones were measured. The bacterial inhibition zone of P＋10% DMADDM was 10 times that of control primer （P〈0.05）. CFU in dentin with P＋10% DMADDM was reduced by three orders of magnitude, compared with control. DMADDM had a much stronger antibacterial effect than QADM, and antibacterial efficacy increased with increasing DMADDM concentration. Dentin shear bond strengths were similar among all groups （P〉0.1）. In conclusion, antibacterial DMADDM-containing primer was validated to kill bacteria inside dentin blocks, possessing a much stronger antibacterial potency than the previous QADM. DMADDM-containing bonding agent was effective in eradicating bacteria in dentin, and its efficacy was directly proportional to DMADDM mass fraction. Therefore, DMADDM may be promisine for use in bonding agents as well as in other restorative and oreventive materials to inhibit bacteria.
基金The project supported by the National Natural Science Foundation of China(19525207)
文摘To verify the theoretical models of varying transversely isotropic stress-strain relations of dentin established in the preceding work(Part Ⅰ),we per- form a set of experiments.Because of the very fine tooth size,it usually seems to be difficult to directly measure the inhomogeneous and anisotropic parameters of dentin.In this paper,by the digital speckle correlation method,tensile experiments are made on the small dentin samples either parallel or perpendicular to the dentin tubules.With the theoretically predicted elastic stress-strain relations,an optimiza- tion method is proposed to fit the strain curve adapted to the experimental data. The results show that the theoretical elastic stress-strain relations coincides very well with the experimental observations.The determined Young's modulus and Poisson's ratio of dentin matrix are 29.5GPa and 0.44,respectively,in the optimization sense.
基金supported by National Natural Science Foundation of China (81670977, J.L. and 81800965, K.L.)Sichuan Science and Technology program (Grant no. 2017SZ0030)+5 种基金Fundamental Research Funds for Central University 2018SCU12016 (K.L.)China Postdoctoral Science Grant 2018M643507 (K.L.)Research Fund of West China Hospital WCHS-201705 (K.L.)Research Fund for Resins of Chinese Stomatological Association CSA-R2018-06 (K.L.)University of Maryland School of Dentistry bridging fund (H.H.K.X.)University of Maryland Baltimore seed grant (H.H.K.X.)
文摘Tooth decay is prevalent,and secondary caries causes restoration failures,both of which are related to demineralization.There is an urgent need to develop new therapeutic materials with remineralization functions.This article represents the first review on the cutting edge research of poly(amido amine)(PAMAM) in combination with nanoparticles of amorphous calcium phosphate (NACP).PAMAM was excellent nucleation template,and could absorb calcium (Ca) and phosphate (P) ions via its functional groups to activate remineralization.NACP composite and adhesive showed acid-neutralization and Ca and P ion release capabilities.PAMAM +NACP together showed synergistic effects and produced triple benefits: excellent nucleation templates,superior acidneutralization,and ions release.Therefore,the PAMAM+NACP strategy possessed much greater remineralization capacity than using PAMAM or NACP alone.PAMAM+NACP achieved dentin remineralization even in an acidic solution without any initial Ca and P ions.Besides,the long-term remineralization capability of PAMAM+NACP was established.After prolonged fluid challenge,the immersed PAMAM with the recharged NACP still induced effective dentin mineral regeneration.Furthermore,the hardness of predemineralized dentin was increased back to that of healthy dentin,indicating a complete remineralization.Therefore,the novel PAMAM+NACP approach is promising to provide long-term therapeutic effects including tooth remineralization,hardness increase,and caries-inhibition capabilities.
文摘Objective To investigate the effect of multiple coatings of the one-step self-etching adhesive on immediate microtensile bond strength to primary dentin.Methods Twelve caries-free human primary molars were randomly divided into 2 groups with 6 teeth each.In group 1,each tooth was hemisected into two halves.One half was assigned to control subgroup 1,which was bonded with a single-step self-etching adhesive according to the manufacturer's instructions;the other half was assigned to experimental subgroup 1 in which the adhesive was applied three times before light curing.In group 2,the teeth were also hemisected into two halves.One half was assigned to control subgroup 2,which was bonded with the single-step self-etching adhesive according to the manufacturer's instructions;the other half was assigned to experimental subgroup 2 in which three layers of adhesive were applied with light curing each successive layer.Microtensile bond strength was immediately tested after specimen preparation.Results When the adhesive was applied three times before light curing,the bond strength of the experimental subgroup 1(n=33,57.49±11.61 MPa) was higher than that of the control subgroup 1(n=31,49.71±11.43 MPa,P<0.05).When using the technique of applying multiple layers of adhesive with light curing each successive layer,no difference of immediate bond strength was observed between the control subgroup 2 and the experimental subgroup 2(P>0.05).Conclusion Multiple coatings of one-step self-etching adhesive can increase the immediate bond strength to primary dentin when using the technique of light-curing after applying three layers of adhesive.
文摘AIM: To systematically review the literature on the efficacy of noninvasive methods of arresting the progression of non-cavitated occlusal carious lesions in dentin.METHODS: The Medline/Pub Med,LILACS,Sci ELO and Scopus databases were searched to identify relevant publications through to November 2013.Only clinical trials evaluating the ability of noninvasive methods to arrest the progression of occlusal non-cavitated carious lesions in dentin were included.Screening,data extraction and quality assessment were conducted independently and in duplicate.RESULTS: Of 167 citations identified,nine full text articles were screened and five were included in the analysis.All papers reported on occlusal fissure sealing using a self-curing glass ionomer(n = 1) or resin-based(n = 4) sealant.Only the use of resin-based sealant to obliterate occlusal fissures arrested the progression of non-cavitated occlusal carious lesions in dentin.CONCLUSION: Occlusal fissure sealing with a resin-based sealant may arrest the progression of non-cavitated occlusal dentinal caries.Further clinical trials with longer follow-up times should be performed to increase scientific evidence.
基金supported by NIH grants Jian-Quan Feng (DE018486) and to Chun-Lin Qin (DE005092)State Key Laboratory of Oral Diseases Open Funding (SKLODOF2010-03) to Jian-Quan Feng
文摘Deletion or mutation of dentin matrix protein 1 （DMP1） leads to hypophosphatemic rickets and defects within the dentin. However, it is largely unknown if this pathological change is a direct role of DMP1 or an indirect role of phosphate （Pi） or both. It has also been previously shown that Klotho-deficient mice, which displayed a high Pi level due to a failure of Pi excretion, causes mild defects in the dentinal structure. This study was to address the distinct roles of DMP1 and Pi homeostasis in cell differentiation, apoptosis and mineralization of dentin and enamel. Our working hypothesis was that a stable Pi homeostasis is critical for postnatal tooth formation, and that DMP1 has an antiapoptotic role in both amelogenesis and dentinogenesis. To test this hypothesis, Dmpl-null （Dmpl-/-）, Klotho-deficient （kl/kl）, Dmpl/Klotho-double-deficient （Dmpl-/-/kl/kl） and wild-type （WT） mice were killed at the age of 6 weeks. Combinations of X-ray, microcomputed tomography （I^CT）, scanning electron microscopy （SEM）, histology, apoptosis and immunohistochemical methods were used for characterization of dentin, enamel and pulp structures in these mutant mice. Our results showed that Dmpl-/- （a low Pi level） or kl/kl（a high Pi level） mice displayed mild dentin defects such as thin dentin and a reduction of dentin tubules. Neither deficient mouse line exhibited any apparent changes in enamel or pulp structure. However, the double-deficient mice （a high Pi level） displayed severe defects in dentin and enamel structures, including loss of dentinal tubules and enamel prisms, as well as unexpected ectopic ossification within the pulp root canal. TUNEL assay showed a sharp increase in apoptotic cells in ameloblasts and odontoblasts. Based on the above findings, we conclude that DMP1 has a protective role for odontoblasts and ameloblasts in a pro-apoptotic environment （a high Pi level）.
基金The project supported by the National Natural Science Foundation of China (19525207).
文摘As known, there is a large number of dentin tubules in dentin. These tubules have varying radii and are shaped into radially parallel pattern. The anisotropy of microstructure of dentin shows that dentin should be treated as a ma- terial of varying transverse isotropy. In this Part, the elastic stress-strain relations and the quadratic strength criterion are established in the form of having varying transverse isotropy, in the framework of micromechanics to take into account of the effect of the microstructures-dentin tubules. Simplified forms for isotropic and ho- mogeneous cases, as well as the corresponding plane stress form of the stress-strain relations are also given. These theoretical models are very well supported by the experiments shown later in the continued paper (Part Ⅱ).
基金supported by grants from National Natural Science Foundation of China(Nos.81701014,81801310,31700076)the Basic Research of Natural Science Project funded by the Department of Science and Technology of Shaanxi Province(No.2017JM8038)the Science and Technology Project funded by the Science and Technology Bureau of Weiyang District,Xi’an city(No.201846)。
文摘In this study, we employed a nonthermal atmospheric pressure plasma(NTAPP) jet to evaluate the effect of plasma treatment on the durability of resin–dentin bonding under a thermocycling challenge. Furthermore, we assessed the degradation resistance of plasma-treated collagen under a sodium hypochlorite(NaClO) challenge. We assessed the beneficial effect of NTAPP treatment on the acid-etched dentin–bonding interface by testing the micro-tensile bond strength and examining the morphology. We found that the immediate bonding strength of the dentin significantly increased after NTAPP treatment. Compared with the control group, NTAPP resulted in a more prominent effect on the bonding durability of the dentin–adhesive interface after treatment for 5 or 10 s. Simultaneously, the mechanical strength of dentin collagen under the NaClO challenge was improved. Our results indicate that, in optimal conditions, NTAPP could be a promising method to protect dentin collagen and to improve the bonding durability between dentin and etch-and-rinse adhesives.
