High voltage is necessary for high energy lithium-ion batteries but difficult to achieve because of the highly deteriorated cyclability of the batteries.A novel strategy is developed to extend cyclability of a high vo...High voltage is necessary for high energy lithium-ion batteries but difficult to achieve because of the highly deteriorated cyclability of the batteries.A novel strategy is developed to extend cyclability of a high voltage lithium-ion battery,LiNi_(0.5)Mn_(1.5)O_(4)/Graphite(LNMO/Graphite)cell,which emphasizes a rational design of an electrolyte additive that can effectively construct protective interphases on anode and cathode and highly eliminate the effect of hydrogen fluoride(HF).5-Trifluoromethylpyridine-trime thyl lithium borate(LTFMP-TMB),is synthesized,featuring with multi-functionalities.Its anion TFMPTMB-tends to be enriched on cathode and can be preferentially oxidized yielding TMB and radical TFMP-.Both TMB and radical TFMP can combine HF and thus eliminate the detrimental effect of HF on cathode,while the TMB dragged on cathode thus takes a preferential oxidation and constructs a protective cathode interphase.On the other hand,LTFMP-TMB is preferentially reduced on anode and constructs a protective anode interphase.Consequently,a small amount of LTFMP-TMB(0.2%)in 1.0 M LiPF6in EC/DEC/EMC(3/2/5,wt%)results in a highly improved cyclability of LNMO/Graphite cell,with the capacity retention enhanced from 52%to 80%after 150 cycles at 0.5 C between 3.5 and 4.8 V.The as-developed strategy provides a model of designing electrolyte additives for improving cyclability of high voltage batteries.展开更多
In this paper,we introduce the design principle of the oscillating excited spray cooling experimental device.We then designed an oscillating excited spray cooling experimental device.By using the device,the swaying mo...In this paper,we introduce the design principle of the oscillating excited spray cooling experimental device.We then designed an oscillating excited spray cooling experimental device.By using the device,the swaying motion can be realized through the control system,and the motion of the droplet under different vibration frequencies can be observed.By measuring the liquid flow rate and pressure,the changes in liquid flow rate,pressure,and temperature with time under different vibration frequencies were studied.The trajectory of the droplet and the temperature distribution of the droplet under different vibration frequencies could be observed.The device has a simple structure,is easy to control,and can achieve continuous observation of the spray cooling process.展开更多
Dear Editor,Compared with traditional technologies affecting gene expression,changing DNA sequences of target genes is one of the most outstanding characters of CRISPR(Clustered Regularly Interspaced Short Palindromic...Dear Editor,Compared with traditional technologies affecting gene expression,changing DNA sequences of target genes is one of the most outstanding characters of CRISPR(Clustered Regularly Interspaced Short Palindromic Repeats).Single-guide RNAs(sgRNAs)guiding endonuclease Cas to target sites is a crucial step of CRISPR-Cas system for changing DNA sequences.An ideal sgRNA should only bind to the target gene.However,similar sequences of non-target sites can also be recognized leading to off-target effects[1].展开更多
The electrochemical oxygen reduction reaction(ORR) and oxygen evolution reaction(OER) are fundamental processes in a range of energy conversion devices such as fuel cells and metal–air batteries. ORR and OER both hav...The electrochemical oxygen reduction reaction(ORR) and oxygen evolution reaction(OER) are fundamental processes in a range of energy conversion devices such as fuel cells and metal–air batteries. ORR and OER both have significant activation barriers, which severely limit the overall performance of energy conversion devices that utilize ORR/OER. Meanwhile, ORR is another very important electrochemical reaction involving oxygen that has been widely investigated. ORR occurs in aqueous solutions via two pathways: the direct 4-electron reduction or 2-electron reduction pathways from O_(2) to water(H_2O) or from O_(2) to hydrogen peroxide(H_2O_(2)). Noble metal electrocatalysts are often used to catalyze OER and ORR, despite the fact that noble metal electrocatalysts have certain intrinsic limitations, such as low storage. Thus, it is urgent to develop more active and stable low-cost electrocatalysts, especially for severe environments(e.g., acidic media). Theoretically, an ideal oxygen electrocatalyst should provide adequate binding to oxygen species. Transition metals not belonging to the platinum group metal-based oxides are a low-cost substance that could give a d orbital for oxygen species binding. As a result, transition metal oxides are regarded as a substitute for typical precious metal oxygen electrocatalysts. However, the development of oxide catalysts for oxygen reduction and oxygen evolution reactions still faces significant challenges, e.g., catalytic activity, stability, cost, and reaction mechanism. We discuss the fundamental principles underlying the design of oxide catalysts, including the influence of crystal structure, and electronic structure on their performance. We also discuss the challenges associated with developing oxide catalysts and the potential strategies to overcome these challenges.展开更多
Rolling stock manufacturers are finding structural solutions to reduce power required by the vehicles,and the lightweight design of the car body represents a possible solution.Optimization processes and innovative mat...Rolling stock manufacturers are finding structural solutions to reduce power required by the vehicles,and the lightweight design of the car body represents a possible solution.Optimization processes and innovative materials can be combined in order to achieve this goal.In this framework,we propose the redesign and optimization process of the car body roof for a light rail vehicle,introducing a sandwich structure.Bonded joint was used as a fastening system.The project was carried out on a single car of a modern tram platform.This preliminary numerical work was developed in two main steps:redesign of the car body structure and optimization of the innovated system.Objective of the process was the mass reduction of the whole metallic structure,while the constraint condition was imposed on the first frequency of vibration of the system.The effect of introducing a sandwich panel within the roof assembly was evaluated,focusing on the mechanical and dynamic performances of the whole car body.A mass saving of 63%on the optimized components was achieved,corresponding to a 7.6%if compared to the complete car body shell.In addition,a positive increasing of 17.7%on the first frequency of vibration was observed.Encouraging results have been achieved in terms of weight reduction and mechanical behaviour of the innovated car body.展开更多
Light-to-thermal conversion materials(LTCMs)have been of great interest to researchers due to their impressive energy conversion capacity and wide range of applications in biomedical,desalination,and synergistic catal...Light-to-thermal conversion materials(LTCMs)have been of great interest to researchers due to their impressive energy conversion capacity and wide range of applications in biomedical,desalination,and synergistic catalysis.Given the limited advances in existing materials(metals,semiconductors,π-conjugates),researchers generally adopt the method of constructing complex systems and hybrid structures to optimize performance and achieve multifunctional integration.However,the development of LTCMs is still in its infancy as the physical mechanism of light-to-thermal conversion is unclear.In this review,we proposed design strategies for efficient LTCMs by analyzing the physical process of light-tothermal conversion.First,we analyze the nature of light absorption and heat generation to reveal the physical processes of light-to-thermal conversion.Then,we explain the light-to-thermal conversion mechanisms of metallic,semiconducting andπ-conjugated LCTMs,and propose new material design strategies and performance improvement methods.Finally,we summarize the challenges and prospects of LTCMs in emerging applications such as solar water evaporation and photothermal catalysis.展开更多
Background With an increasing number of vehicles becoming autonomous,intelligent,and connected,paying attention to the future usage of car human-machine interface with these vehicles should become more relevant.Severa...Background With an increasing number of vehicles becoming autonomous,intelligent,and connected,paying attention to the future usage of car human-machine interface with these vehicles should become more relevant.Several studies have addressed car HMI but were less attentive to designing and implementing interactive glazing for every day(autonomous)driving contexts.Methods Reflecting on the literature,we describe an engineering psychology practice and the design of six novel future user scenarios,which envision the application of a specific set of augmented reality(AR)support user interactions.Additionally,we conduct evaluations on specific scenarios and experiential prototypes,which reveal that these AR scenarios aid the target user groups in experiencing a new type of interaction.The overall evaluation is positive with valuable assessment results and suggestions.Conclusions This study can interest applied psychology educators who aspire to teach how AR can be operationalized in a human-centered design process to students with minimal pre-existing expertise or minimal scientific knowledge in engineering psychology.展开更多
Independent living and freedom of choice are closely linked to the social inclusion of PwD(Persons with Disabilities)in society.The paper reports on a recent study focused on investigating and understanding the needs ...Independent living and freedom of choice are closely linked to the social inclusion of PwD(Persons with Disabilities)in society.The paper reports on a recent study focused on investigating and understanding the needs and desires of persons with intellectual disabilities,with reduced mobility and with visual impairments while performing daily activities in order to design user-friendly and inclusive home environments for their life project.The case study concerns an apartment on the ground floor of a building well embedded in a neighborhood urban and social context.It was selected by Anffas Trentino Onlus to train young adults in independent living.Anffas is the National Association of Families of People Intellectual and/or Relational Disabilities,present and operating throughout Italy.Since 2008,important projects have been promoted by Anffas Trentino Onlus aimed at stimulating a personal and housing autonomy in PwD for“during and after us”,or rather when there are no more family members to take care of them.The design process involved a representative focus group of end users.With them and some Anffas staff components,it was possible to implement a participatory design process by sharing and verifying needs,desires,expectations.This approach was adopted in order to jointly develop a design proposal for a new inclusive apartment changing the paradigm from design for to design with,and building awareness both in the end users and designers.展开更多
This paper analyses the design and implementation of Listening Course of New College English(Book 3) within the second year non-English major students in Yunnan Agricultural University, China. This includes the course...This paper analyses the design and implementation of Listening Course of New College English(Book 3) within the second year non-English major students in Yunnan Agricultural University, China. This includes the course's planning and delivery with attention upon its learning theories and frameworks. Furthermore, it focuses on how it impacts upon the teaching and learning process. This includes the identification and appropriateness of its learning outcomes, learning activities, its assessment criteria and evaluation. This paper specifically reflects on the course's concept of constructive alignment.展开更多
By phenomenological analysis of warm compaction, it is found that, compared with the contribution of particle plastical deformation to densification of powder compact,the particle rearrangement is a dominant densifica...By phenomenological analysis of warm compaction, it is found that, compared with the contribution of particle plastical deformation to densification of powder compact,the particle rearrangement is a dominant densification mechanism for powder warm compaction, and the plastical deformation of particles plays an important role in offering accommodating deformation for particle rearrangement and densifying powder compact at the final stage of pressing.In order to attain density gain as high as possible during warm compaction, six rules for designing warm compacting powder mixtures were proposed in detail.展开更多
An increase in methane,spontaneous fire and bumping hazards in Polish hard coal mines,observed in the last two decades,led to the need to elaborate the tools allowing proper selection of a range of preventive measures...An increase in methane,spontaneous fire and bumping hazards in Polish hard coal mines,observed in the last two decades,led to the need to elaborate the tools allowing proper selection of a range of preventive measures to fight them at the stage of designing coal extraction.Designing the production of a coal seams in the conditions of associated methane and spontaneous fires hazards in Polish hard coal mines requires elaboration of the design standards for coal panels in gassy coal seams.This paper presents the guidelines on how to design production in the conditions of associated methane and spontaneous fire hazards.Presented tools and methodology since the very first research were many times verified by daily mining operations in the conditions of associated methane and spontaneous fire hazards,which confirms their significant contribution to the development of safe and economical mining operations.展开更多
One of the major challenges in designing and fabricating Spintronic devices is the choice of both, Materials and the Technology, along with understanding the intricacies of the Designing aspects. In this communication...One of the major challenges in designing and fabricating Spintronic devices is the choice of both, Materials and the Technology, along with understanding the intricacies of the Designing aspects. In this communication, we have attempted to briefly discuss these factors, with an aim to draw the attention of the Materials Scientists and Technologists to this serious challenge, in the direction of which, though a lot of research and development work has been done, still needs more concerted efforts to be made in order to make the Spintronic devices that can offer good efficiency for maximizing their usefulness.展开更多
Transgression networks in metropolitan centers need to supply a large quantity of power in a reliable manner to vital loads that are located within. A transmission network supplying such an important area must have a ...Transgression networks in metropolitan centers need to supply a large quantity of power in a reliable manner to vital loads that are located within. A transmission network supplying such an important area must have a high standard of reliability. Therefore, those transmission systems require a special form of redundancy in order to prevent sustained outages after severe contingencies such as multiple faults. This paper outlines different forms of redundancy, and the fundamental options for designing a metropolitan network based on different forms of redundancy are illustrated. Relative merits and drawbacks of network designs based on each form of redundancy are also shown.展开更多
We envision utilizing the versatility of a Computer Algebra System, specifically Mathematica to explore designing physics problems. As a focused project, we consider for instance a thermo-mechanical-physics problem sh...We envision utilizing the versatility of a Computer Algebra System, specifically Mathematica to explore designing physics problems. As a focused project, we consider for instance a thermo-mechanical-physics problem showing its development from the ground up. Following the objectives of this investigation first by applying the fundamentals of physics principles we solve the problem symbolically. Applying the solution we investigate the sensitivities of the quantities of interest for various scenarios generating feasible numeric parameters. Although a physics problem is investigated, the proposed methodology may as well be applied to other scientific fields. The codes needed for this particular project are included enabling the interested reader to duplicate the results, extend and modify them as needed to explore various extended scenarios.展开更多
In order to obtain larger,clinical-scale and practical-scale bone grafts,we have designed both tailored scaffolds and tailored bio incubator with optimal bio-production characteristics.Using DIC files to Simpleware Sc...In order to obtain larger,clinical-scale and practical-scale bone grafts,we have designed both tailored scaffolds and tailored bio incubator with optimal bio-production characteristics.Using DIC files to Simpleware Scan-IP(Simple-ware-exeter United Kingdom),we have digitally reconstructed segmental additive bone-tissue in order to perform images processing.Both hydroxyapatite and tannin composites have been used in order to get the final bone modules combined for retexturing of segmental bone defect.We have found that sectioning of bone segment deficiency reorganizations into well disk-shaped design permits one to standardize the cell culture and seeding protocol,to get better products.The present study concludes that some techniques with cultured cell in segmental bone grafts in the laboratory can be transferred and clinically used.展开更多
Background: Promoting breastfeeding support by public health nurses (PHN) requires first that the support which they currently provide to be assessed. However, there is no assessment tool for this purpose. The aim of ...Background: Promoting breastfeeding support by public health nurses (PHN) requires first that the support which they currently provide to be assessed. However, there is no assessment tool for this purpose. The aim of this study was therefore to develop a scale to assess breastfeeding support currently provided by PHN. Methods: We developed the Practice of Breastfeeding Support Scale (PBSS) for PHN based on the results of a previous study. The content validity of the PBSS was established through discussion with three other researchers. A pilot study was conducted to confirm face validity. To confirm reliability and validity, an anonymous, self-reported questionnaire was sent to PHN working in municipal offices. The statistical analyses included the Kaiser-Meyer-Olkin (KMO), Barlett’s Test of Sphericity, exploratory factor analysis (EFA), Cronbach’s alpha and correlation coefficient. Results: 768 PHN participated in this study. Cronbach’s alpha of PBSS was 0.85. The KMO measure was 0.892, and Bartlett’s Test of Sphericity was p Conclusion: The reliability and validity of PBSS were confirmed. These findings suggested that the PBSS has the potential to help promote breastfeeding support by PHN by clarifying their current breastfeeding support practices and related factors.展开更多
The types of urban-rural recreational greenways were summarized,based on bicycle tourism and their planning methodology was explored.Taking the urban and rural areas of Harbin City as the research objects,the current ...The types of urban-rural recreational greenways were summarized,based on bicycle tourism and their planning methodology was explored.Taking the urban and rural areas of Harbin City as the research objects,the current situation of urban-rural recreational greenway environment and tourism resources was investigated and the evaluation system of bicycle tourism resources was established and tourism resources were evaluated according to the AHP-fuzzy comprehensive evaluation method to select suitable resources for bicycle tourism.Through the ArcGIS software,the currently available resources(rivers,wetlands,transportations and urban-layout)and suitable bicycle tourism resources were superimposed,and the spatial pattern planning and classification planning of urban-rural recreational greenway based on bicycle tourism were carried out.To the end,insights for the development of urbanrural recreational greenway in the future were provided.展开更多
In this paper, we conduct research on the applications of big data on artistic designing and its infl uences on the design behavior. Modern art design enhance the grade of the product, increase the added value of prod...In this paper, we conduct research on the applications of big data on artistic designing and its infl uences on the design behavior. Modern art design enhance the grade of the product, increase the added value of products, promote the development of the economy, make the product of the aesthetic value and economic value of the perfect unity. In today’s society due to the value of the product are much more than the product itself contains the value of performance, usage, etc. is more of a product in gradually improve the aesthetic value, sometimes even more than the use of the product value and exchange value, therefore the product has become the dominant value. Under this basis, we propose the new idea on the design pattern that will be meaningful.展开更多
Undoubtedly, pipeline transport is considered as significant economical artery of country and national valuable resources, so it is necessary to use latest technologies, major standards and instructions and the best h...Undoubtedly, pipeline transport is considered as significant economical artery of country and national valuable resources, so it is necessary to use latest technologies, major standards and instructions and the best human resources in designing, operation and supervision in construction and also protection of it. Also, all authorities and involved of construction and operation of gas industries installation should observe safety criteria, health and environment and aware of them ever. In fact, in designing of these programs, in addition to technical and economical points, environmental characteristics should be considered in order to their construction has minimum damage to environment. On the other hand, common and traditional approaches of pipeline routing are based on using costly and time-consuming methods. In these methods, it is not easily to use all effective parameters in determining optimum way. According to capability of analysis of network spatial information systems in incorporation of spatial data, for using all effective parameters in routing, this environment is used, therefore weighted overlay analysis (Boleyn, index and fuzzy) and shortest path are modeled for finding optimum path of pipeline in GIS environment.展开更多
The paper deals with the designing of an electric drive system used for hybrid electric vehicles. The driving system is realized with an induction motor and a voltage source inverter. Specifically, the application is ...The paper deals with the designing of an electric drive system used for hybrid electric vehicles. The driving system is realized with an induction motor and a voltage source inverter. Specifically, the application is for a series hybrid vehicle powered by electric storage batteries charged by solar batteries. In the first part of the paper the designing of the electric storage batteries and of the photoelectric system is presented. In the second part of the paper some aspects regarding the designing of the induction motor are presented. Then some aspects concerning the voltage source inverter designing are exposed.展开更多
基金supported by the National Natural Science Foundation of China(22179041)。
文摘High voltage is necessary for high energy lithium-ion batteries but difficult to achieve because of the highly deteriorated cyclability of the batteries.A novel strategy is developed to extend cyclability of a high voltage lithium-ion battery,LiNi_(0.5)Mn_(1.5)O_(4)/Graphite(LNMO/Graphite)cell,which emphasizes a rational design of an electrolyte additive that can effectively construct protective interphases on anode and cathode and highly eliminate the effect of hydrogen fluoride(HF).5-Trifluoromethylpyridine-trime thyl lithium borate(LTFMP-TMB),is synthesized,featuring with multi-functionalities.Its anion TFMPTMB-tends to be enriched on cathode and can be preferentially oxidized yielding TMB and radical TFMP-.Both TMB and radical TFMP can combine HF and thus eliminate the detrimental effect of HF on cathode,while the TMB dragged on cathode thus takes a preferential oxidation and constructs a protective cathode interphase.On the other hand,LTFMP-TMB is preferentially reduced on anode and constructs a protective anode interphase.Consequently,a small amount of LTFMP-TMB(0.2%)in 1.0 M LiPF6in EC/DEC/EMC(3/2/5,wt%)results in a highly improved cyclability of LNMO/Graphite cell,with the capacity retention enhanced from 52%to 80%after 150 cycles at 0.5 C between 3.5 and 4.8 V.The as-developed strategy provides a model of designing electrolyte additives for improving cyclability of high voltage batteries.
基金The Natural Science Foundation of the Jiangsu Higher Education Institutions of China(22KJD580001)Jiangsu Maritime Institute Innovation Technology Funding Project(kicx2020-2)。
文摘In this paper,we introduce the design principle of the oscillating excited spray cooling experimental device.We then designed an oscillating excited spray cooling experimental device.By using the device,the swaying motion can be realized through the control system,and the motion of the droplet under different vibration frequencies can be observed.By measuring the liquid flow rate and pressure,the changes in liquid flow rate,pressure,and temperature with time under different vibration frequencies were studied.The trajectory of the droplet and the temperature distribution of the droplet under different vibration frequencies could be observed.The device has a simple structure,is easy to control,and can achieve continuous observation of the spray cooling process.
基金This work was supported by National Natural Science Foundation of China(Grant No.32100501)Shenzhen Science and Technology Program(Grant No.RCBS20210609103819020)J.Z.was funded by the Zhejiang Science and Technology Major Program on Agricultural New Variety Breeding(2021C02070-1).
文摘Dear Editor,Compared with traditional technologies affecting gene expression,changing DNA sequences of target genes is one of the most outstanding characters of CRISPR(Clustered Regularly Interspaced Short Palindromic Repeats).Single-guide RNAs(sgRNAs)guiding endonuclease Cas to target sites is a crucial step of CRISPR-Cas system for changing DNA sequences.An ideal sgRNA should only bind to the target gene.However,similar sequences of non-target sites can also be recognized leading to off-target effects[1].
基金the Natural Science Foundation of China (22005250)National Key R D Program of China (2022YFB2502000)FWO (12ZV320N)。
文摘The electrochemical oxygen reduction reaction(ORR) and oxygen evolution reaction(OER) are fundamental processes in a range of energy conversion devices such as fuel cells and metal–air batteries. ORR and OER both have significant activation barriers, which severely limit the overall performance of energy conversion devices that utilize ORR/OER. Meanwhile, ORR is another very important electrochemical reaction involving oxygen that has been widely investigated. ORR occurs in aqueous solutions via two pathways: the direct 4-electron reduction or 2-electron reduction pathways from O_(2) to water(H_2O) or from O_(2) to hydrogen peroxide(H_2O_(2)). Noble metal electrocatalysts are often used to catalyze OER and ORR, despite the fact that noble metal electrocatalysts have certain intrinsic limitations, such as low storage. Thus, it is urgent to develop more active and stable low-cost electrocatalysts, especially for severe environments(e.g., acidic media). Theoretically, an ideal oxygen electrocatalyst should provide adequate binding to oxygen species. Transition metals not belonging to the platinum group metal-based oxides are a low-cost substance that could give a d orbital for oxygen species binding. As a result, transition metal oxides are regarded as a substitute for typical precious metal oxygen electrocatalysts. However, the development of oxide catalysts for oxygen reduction and oxygen evolution reactions still faces significant challenges, e.g., catalytic activity, stability, cost, and reaction mechanism. We discuss the fundamental principles underlying the design of oxide catalysts, including the influence of crystal structure, and electronic structure on their performance. We also discuss the challenges associated with developing oxide catalysts and the potential strategies to overcome these challenges.
文摘Rolling stock manufacturers are finding structural solutions to reduce power required by the vehicles,and the lightweight design of the car body represents a possible solution.Optimization processes and innovative materials can be combined in order to achieve this goal.In this framework,we propose the redesign and optimization process of the car body roof for a light rail vehicle,introducing a sandwich structure.Bonded joint was used as a fastening system.The project was carried out on a single car of a modern tram platform.This preliminary numerical work was developed in two main steps:redesign of the car body structure and optimization of the innovated system.Objective of the process was the mass reduction of the whole metallic structure,while the constraint condition was imposed on the first frequency of vibration of the system.The effect of introducing a sandwich panel within the roof assembly was evaluated,focusing on the mechanical and dynamic performances of the whole car body.A mass saving of 63%on the optimized components was achieved,corresponding to a 7.6%if compared to the complete car body shell.In addition,a positive increasing of 17.7%on the first frequency of vibration was observed.Encouraging results have been achieved in terms of weight reduction and mechanical behaviour of the innovated car body.
基金the financial support from the National Natural Science Foundation of China(Grant Nos.52272153,52032004)the KLOMT Key Laboratory Open Project(2022KLOMT02-05)。
文摘Light-to-thermal conversion materials(LTCMs)have been of great interest to researchers due to their impressive energy conversion capacity and wide range of applications in biomedical,desalination,and synergistic catalysis.Given the limited advances in existing materials(metals,semiconductors,π-conjugates),researchers generally adopt the method of constructing complex systems and hybrid structures to optimize performance and achieve multifunctional integration.However,the development of LTCMs is still in its infancy as the physical mechanism of light-to-thermal conversion is unclear.In this review,we proposed design strategies for efficient LTCMs by analyzing the physical process of light-tothermal conversion.First,we analyze the nature of light absorption and heat generation to reveal the physical processes of light-to-thermal conversion.Then,we explain the light-to-thermal conversion mechanisms of metallic,semiconducting andπ-conjugated LCTMs,and propose new material design strategies and performance improvement methods.Finally,we summarize the challenges and prospects of LTCMs in emerging applications such as solar water evaporation and photothermal catalysis.
基金Supported by the‘Automotive Glazing Application in Intelligent Cockpit Human-Machine Interface’project(SKHX2021049)a collaboration between the Saint-Go Bain Research and the Beijing Normal University。
文摘Background With an increasing number of vehicles becoming autonomous,intelligent,and connected,paying attention to the future usage of car human-machine interface with these vehicles should become more relevant.Several studies have addressed car HMI but were less attentive to designing and implementing interactive glazing for every day(autonomous)driving contexts.Methods Reflecting on the literature,we describe an engineering psychology practice and the design of six novel future user scenarios,which envision the application of a specific set of augmented reality(AR)support user interactions.Additionally,we conduct evaluations on specific scenarios and experiential prototypes,which reveal that these AR scenarios aid the target user groups in experiencing a new type of interaction.The overall evaluation is positive with valuable assessment results and suggestions.Conclusions This study can interest applied psychology educators who aspire to teach how AR can be operationalized in a human-centered design process to students with minimal pre-existing expertise or minimal scientific knowledge in engineering psychology.
文摘Independent living and freedom of choice are closely linked to the social inclusion of PwD(Persons with Disabilities)in society.The paper reports on a recent study focused on investigating and understanding the needs and desires of persons with intellectual disabilities,with reduced mobility and with visual impairments while performing daily activities in order to design user-friendly and inclusive home environments for their life project.The case study concerns an apartment on the ground floor of a building well embedded in a neighborhood urban and social context.It was selected by Anffas Trentino Onlus to train young adults in independent living.Anffas is the National Association of Families of People Intellectual and/or Relational Disabilities,present and operating throughout Italy.Since 2008,important projects have been promoted by Anffas Trentino Onlus aimed at stimulating a personal and housing autonomy in PwD for“during and after us”,or rather when there are no more family members to take care of them.The design process involved a representative focus group of end users.With them and some Anffas staff components,it was possible to implement a participatory design process by sharing and verifying needs,desires,expectations.This approach was adopted in order to jointly develop a design proposal for a new inclusive apartment changing the paradigm from design for to design with,and building awareness both in the end users and designers.
文摘This paper analyses the design and implementation of Listening Course of New College English(Book 3) within the second year non-English major students in Yunnan Agricultural University, China. This includes the course's planning and delivery with attention upon its learning theories and frameworks. Furthermore, it focuses on how it impacts upon the teaching and learning process. This includes the identification and appropriateness of its learning outcomes, learning activities, its assessment criteria and evaluation. This paper specifically reflects on the course's concept of constructive alignment.
文摘By phenomenological analysis of warm compaction, it is found that, compared with the contribution of particle plastical deformation to densification of powder compact,the particle rearrangement is a dominant densification mechanism for powder warm compaction, and the plastical deformation of particles plays an important role in offering accommodating deformation for particle rearrangement and densifying powder compact at the final stage of pressing.In order to attain density gain as high as possible during warm compaction, six rules for designing warm compacting powder mixtures were proposed in detail.
文摘An increase in methane,spontaneous fire and bumping hazards in Polish hard coal mines,observed in the last two decades,led to the need to elaborate the tools allowing proper selection of a range of preventive measures to fight them at the stage of designing coal extraction.Designing the production of a coal seams in the conditions of associated methane and spontaneous fires hazards in Polish hard coal mines requires elaboration of the design standards for coal panels in gassy coal seams.This paper presents the guidelines on how to design production in the conditions of associated methane and spontaneous fire hazards.Presented tools and methodology since the very first research were many times verified by daily mining operations in the conditions of associated methane and spontaneous fire hazards,which confirms their significant contribution to the development of safe and economical mining operations.
文摘One of the major challenges in designing and fabricating Spintronic devices is the choice of both, Materials and the Technology, along with understanding the intricacies of the Designing aspects. In this communication, we have attempted to briefly discuss these factors, with an aim to draw the attention of the Materials Scientists and Technologists to this serious challenge, in the direction of which, though a lot of research and development work has been done, still needs more concerted efforts to be made in order to make the Spintronic devices that can offer good efficiency for maximizing their usefulness.
文摘Transgression networks in metropolitan centers need to supply a large quantity of power in a reliable manner to vital loads that are located within. A transmission network supplying such an important area must have a high standard of reliability. Therefore, those transmission systems require a special form of redundancy in order to prevent sustained outages after severe contingencies such as multiple faults. This paper outlines different forms of redundancy, and the fundamental options for designing a metropolitan network based on different forms of redundancy are illustrated. Relative merits and drawbacks of network designs based on each form of redundancy are also shown.
文摘We envision utilizing the versatility of a Computer Algebra System, specifically Mathematica to explore designing physics problems. As a focused project, we consider for instance a thermo-mechanical-physics problem showing its development from the ground up. Following the objectives of this investigation first by applying the fundamentals of physics principles we solve the problem symbolically. Applying the solution we investigate the sensitivities of the quantities of interest for various scenarios generating feasible numeric parameters. Although a physics problem is investigated, the proposed methodology may as well be applied to other scientific fields. The codes needed for this particular project are included enabling the interested reader to duplicate the results, extend and modify them as needed to explore various extended scenarios.
文摘In order to obtain larger,clinical-scale and practical-scale bone grafts,we have designed both tailored scaffolds and tailored bio incubator with optimal bio-production characteristics.Using DIC files to Simpleware Scan-IP(Simple-ware-exeter United Kingdom),we have digitally reconstructed segmental additive bone-tissue in order to perform images processing.Both hydroxyapatite and tannin composites have been used in order to get the final bone modules combined for retexturing of segmental bone defect.We have found that sectioning of bone segment deficiency reorganizations into well disk-shaped design permits one to standardize the cell culture and seeding protocol,to get better products.The present study concludes that some techniques with cultured cell in segmental bone grafts in the laboratory can be transferred and clinically used.
文摘Background: Promoting breastfeeding support by public health nurses (PHN) requires first that the support which they currently provide to be assessed. However, there is no assessment tool for this purpose. The aim of this study was therefore to develop a scale to assess breastfeeding support currently provided by PHN. Methods: We developed the Practice of Breastfeeding Support Scale (PBSS) for PHN based on the results of a previous study. The content validity of the PBSS was established through discussion with three other researchers. A pilot study was conducted to confirm face validity. To confirm reliability and validity, an anonymous, self-reported questionnaire was sent to PHN working in municipal offices. The statistical analyses included the Kaiser-Meyer-Olkin (KMO), Barlett’s Test of Sphericity, exploratory factor analysis (EFA), Cronbach’s alpha and correlation coefficient. Results: 768 PHN participated in this study. Cronbach’s alpha of PBSS was 0.85. The KMO measure was 0.892, and Bartlett’s Test of Sphericity was p Conclusion: The reliability and validity of PBSS were confirmed. These findings suggested that the PBSS has the potential to help promote breastfeeding support by PHN by clarifying their current breastfeeding support practices and related factors.
基金Supported by Heilongjiang Natural Science Funding Project"Ecological Evaluation of Planning and Designing of Water Landscape for Farmland in Cold Field"(E2015022)。
文摘The types of urban-rural recreational greenways were summarized,based on bicycle tourism and their planning methodology was explored.Taking the urban and rural areas of Harbin City as the research objects,the current situation of urban-rural recreational greenway environment and tourism resources was investigated and the evaluation system of bicycle tourism resources was established and tourism resources were evaluated according to the AHP-fuzzy comprehensive evaluation method to select suitable resources for bicycle tourism.Through the ArcGIS software,the currently available resources(rivers,wetlands,transportations and urban-layout)and suitable bicycle tourism resources were superimposed,and the spatial pattern planning and classification planning of urban-rural recreational greenway based on bicycle tourism were carried out.To the end,insights for the development of urbanrural recreational greenway in the future were provided.
文摘In this paper, we conduct research on the applications of big data on artistic designing and its infl uences on the design behavior. Modern art design enhance the grade of the product, increase the added value of products, promote the development of the economy, make the product of the aesthetic value and economic value of the perfect unity. In today’s society due to the value of the product are much more than the product itself contains the value of performance, usage, etc. is more of a product in gradually improve the aesthetic value, sometimes even more than the use of the product value and exchange value, therefore the product has become the dominant value. Under this basis, we propose the new idea on the design pattern that will be meaningful.
文摘Undoubtedly, pipeline transport is considered as significant economical artery of country and national valuable resources, so it is necessary to use latest technologies, major standards and instructions and the best human resources in designing, operation and supervision in construction and also protection of it. Also, all authorities and involved of construction and operation of gas industries installation should observe safety criteria, health and environment and aware of them ever. In fact, in designing of these programs, in addition to technical and economical points, environmental characteristics should be considered in order to their construction has minimum damage to environment. On the other hand, common and traditional approaches of pipeline routing are based on using costly and time-consuming methods. In these methods, it is not easily to use all effective parameters in determining optimum way. According to capability of analysis of network spatial information systems in incorporation of spatial data, for using all effective parameters in routing, this environment is used, therefore weighted overlay analysis (Boleyn, index and fuzzy) and shortest path are modeled for finding optimum path of pipeline in GIS environment.
文摘The paper deals with the designing of an electric drive system used for hybrid electric vehicles. The driving system is realized with an induction motor and a voltage source inverter. Specifically, the application is for a series hybrid vehicle powered by electric storage batteries charged by solar batteries. In the first part of the paper the designing of the electric storage batteries and of the photoelectric system is presented. In the second part of the paper some aspects regarding the designing of the induction motor are presented. Then some aspects concerning the voltage source inverter designing are exposed.
