Hydrogen peroxide synthesis by electro-reduction of O_(2) to substitute the current anthraquinone process has attracted a great deal of attention. Low oxygen utilization rate and low hydrogen peroxide production remai...Hydrogen peroxide synthesis by electro-reduction of O_(2) to substitute the current anthraquinone process has attracted a great deal of attention. Low oxygen utilization rate and low hydrogen peroxide production remain obstacles to electro-Fenton application. In situ H_(2)O_(2) generated by electrochemical reaction depends on the electrochemical performance of the cathode and the structure of the reactor. Here, novel graphite felt(GF) modified by La-doped CeO_(2)(La-CeO_(2)) was developed as a cathode. A new double chamber electro-Fenton reactor was proposed, where an organic ultrafiltration membrane was used to prevent H_(2)O_(2) from spreading to the anode. The effects of hydrothermal temperature, time and urea concentration on the electrochemical properties of graphite felt were investigated. The accumulated concentration of H_(2)O_(2) on the modified cathode reached 218.4 mg·L^(-1)in 1 h when the optimal conditions of hydrothermal temperature 120 ℃ and urea concentration 0.55%(mass) in 24 h. The degradation rate of methyl orange reached 98.29%. The new electro-Fenton reactor can efficiently produce hydrogen peroxide to degrade various organic substances and has a high potential for treating wastewater in the chemical industry.展开更多
By merging two standard swirl chambers,an alternative cooling configuration named double swirl chambers(DSC)has been developed.In the DSC cooling configuration,the main physical phenomena of the swirl flow in swirl ch...By merging two standard swirl chambers,an alternative cooling configuration named double swirl chambers(DSC)has been developed.In the DSC cooling configuration,the main physical phenomena of the swirl flow in swirl chamber and the advantages of swirl flow in heat transfer augmentation are maintained.Additionally,three new physical phenomena can be found in DSC cooling configuration,which result in a further improvement of the heat transfer:(1)impingement effect has been observed,(2)internal heat exchange has been enhanced between fluids in two swirls,and(3)“∞”shape swirl has been generated because of cross effect between two chambers,which improves the mixing of the fluids.Because of all these improvements,the DSC cooling configuration leads to a higher globally-averaged thermal performance parameter(Nu/Nu_(∞)/(f/f0)^(1/3))than standard swirl chamber.In particular,at the inlet region,the augmentation of the heat transfer is nearly 7.5 times larger than the fully developed non-swirl turbulent flow and the circumferentially averaged Nusselt number coefficient is 41%larger than the standard swirl chamber.Within the present work,a further investigation on the DSC cooling configuration has been focused on the influence of geometry parameters e.g.merging ratio of chambers and aspect ratio of inlet duct on the cooling perfomance.The results show a very large influence of these geometry parameters in heat transfer enhancement and pressure drop ratio.Compared with the basic configuration of DSC cooling,the improved configuration with 20%to 23%merging ratio shows the highest globally-averaged themal performance parameter.With the same cross section area in tangential inlet ducts,the DSC cooling channel with larger aspect ratio shows larger heat transfer enhancement and at the same time reduced pressure drop ratio,which results in a better globally-averaged themal performance parameter.展开更多
It is known that the leading edge has the most critical heat transfer area of a gas turbine blade.The highest heat transfer rates on the airfoil can always be found on the stagnation region of the leading edge.In orde...It is known that the leading edge has the most critical heat transfer area of a gas turbine blade.The highest heat transfer rates on the airfoil can always be found on the stagnation region of the leading edge.In order to further improve the gas turbine thermal efficiency the development of more advanced internal cooling configurations at leading edge is very necessary.As the state of the art leading edge cooling configuration a concave channel with multi inline jets has been widely used in most of the blades.However,this kind of configuration also generates strong spent flow,which shifts the impingement off the stagnation point and weakens the impingement heat transfer.In order to solve this problem a new internal cooling configuration using double swirl chambers in gas turbine leading edge has been developed and introduced in this paper.The double swirl chambers cooling(DSC)technology is introduced by the authors and contributes a significant enhancement of heat transfer due to the generation of two anti-rotated swirls.In DSC-cooling,the reattachment of the swirl flows always occurs in the middle of the chamber,which results in a linear impingement effect.Compared with the reference standard impingement cooling configuration this new cooling system provides a much more uniform heat transfer distribution in the chamber axial direction and also provides a much higher heat transfer rate.In this study,the influences of different geometrical parameters e.g.merging ratio of two cylinder channels,the jet inlet hole configurations and radius of blunt protuberances in DSC have been investigated numerically.The results show that in the DSC cooling system the jet inlet hole configurations have large influences on the thermal performance.The rectangular inlet holes,especially those with higher aspect ratios,show much better heat transfer enhancement than the round inlet holes.However,as the price for it the total pressure drop is increased.Using blunt protuberances instead of sharp edges in the DSC cooling can improve the heat transfer enhancement and reduce the total pressure drop.展开更多
基金supported by the Tianjin Synthetic Biotechnology Innovation Capacity Improvement Project (TSBICIP-KJGG003)Qinglan Plan of the Jiangsu Education Department。
文摘Hydrogen peroxide synthesis by electro-reduction of O_(2) to substitute the current anthraquinone process has attracted a great deal of attention. Low oxygen utilization rate and low hydrogen peroxide production remain obstacles to electro-Fenton application. In situ H_(2)O_(2) generated by electrochemical reaction depends on the electrochemical performance of the cathode and the structure of the reactor. Here, novel graphite felt(GF) modified by La-doped CeO_(2)(La-CeO_(2)) was developed as a cathode. A new double chamber electro-Fenton reactor was proposed, where an organic ultrafiltration membrane was used to prevent H_(2)O_(2) from spreading to the anode. The effects of hydrothermal temperature, time and urea concentration on the electrochemical properties of graphite felt were investigated. The accumulated concentration of H_(2)O_(2) on the modified cathode reached 218.4 mg·L^(-1)in 1 h when the optimal conditions of hydrothermal temperature 120 ℃ and urea concentration 0.55%(mass) in 24 h. The degradation rate of methyl orange reached 98.29%. The new electro-Fenton reactor can efficiently produce hydrogen peroxide to degrade various organic substances and has a high potential for treating wastewater in the chemical industry.
文摘By merging two standard swirl chambers,an alternative cooling configuration named double swirl chambers(DSC)has been developed.In the DSC cooling configuration,the main physical phenomena of the swirl flow in swirl chamber and the advantages of swirl flow in heat transfer augmentation are maintained.Additionally,three new physical phenomena can be found in DSC cooling configuration,which result in a further improvement of the heat transfer:(1)impingement effect has been observed,(2)internal heat exchange has been enhanced between fluids in two swirls,and(3)“∞”shape swirl has been generated because of cross effect between two chambers,which improves the mixing of the fluids.Because of all these improvements,the DSC cooling configuration leads to a higher globally-averaged thermal performance parameter(Nu/Nu_(∞)/(f/f0)^(1/3))than standard swirl chamber.In particular,at the inlet region,the augmentation of the heat transfer is nearly 7.5 times larger than the fully developed non-swirl turbulent flow and the circumferentially averaged Nusselt number coefficient is 41%larger than the standard swirl chamber.Within the present work,a further investigation on the DSC cooling configuration has been focused on the influence of geometry parameters e.g.merging ratio of chambers and aspect ratio of inlet duct on the cooling perfomance.The results show a very large influence of these geometry parameters in heat transfer enhancement and pressure drop ratio.Compared with the basic configuration of DSC cooling,the improved configuration with 20%to 23%merging ratio shows the highest globally-averaged themal performance parameter.With the same cross section area in tangential inlet ducts,the DSC cooling channel with larger aspect ratio shows larger heat transfer enhancement and at the same time reduced pressure drop ratio,which results in a better globally-averaged themal performance parameter.
文摘It is known that the leading edge has the most critical heat transfer area of a gas turbine blade.The highest heat transfer rates on the airfoil can always be found on the stagnation region of the leading edge.In order to further improve the gas turbine thermal efficiency the development of more advanced internal cooling configurations at leading edge is very necessary.As the state of the art leading edge cooling configuration a concave channel with multi inline jets has been widely used in most of the blades.However,this kind of configuration also generates strong spent flow,which shifts the impingement off the stagnation point and weakens the impingement heat transfer.In order to solve this problem a new internal cooling configuration using double swirl chambers in gas turbine leading edge has been developed and introduced in this paper.The double swirl chambers cooling(DSC)technology is introduced by the authors and contributes a significant enhancement of heat transfer due to the generation of two anti-rotated swirls.In DSC-cooling,the reattachment of the swirl flows always occurs in the middle of the chamber,which results in a linear impingement effect.Compared with the reference standard impingement cooling configuration this new cooling system provides a much more uniform heat transfer distribution in the chamber axial direction and also provides a much higher heat transfer rate.In this study,the influences of different geometrical parameters e.g.merging ratio of two cylinder channels,the jet inlet hole configurations and radius of blunt protuberances in DSC have been investigated numerically.The results show that in the DSC cooling system the jet inlet hole configurations have large influences on the thermal performance.The rectangular inlet holes,especially those with higher aspect ratios,show much better heat transfer enhancement than the round inlet holes.However,as the price for it the total pressure drop is increased.Using blunt protuberances instead of sharp edges in the DSC cooling can improve the heat transfer enhancement and reduce the total pressure drop.