The configuration of the novel three-stage L-band erbium-doped fiber amplifier with very large and flat gain and very low noise figure presented in this paper uses the forward ASE (amplified spontaneous emission) from...The configuration of the novel three-stage L-band erbium-doped fiber amplifier with very large and flat gain and very low noise figure presented in this paper uses the forward ASE (amplified spontaneous emission) from the first section of the EDF (erbium-doped fiber) and the backward ASE from the third section of the EDF (both serve as the secondary pump sources of energy) to pump the second EDF. To improve the pump efficiency, the power of the pump is split into two parts (with a ratio of e.g. 2:7). The characteristics of this L-band EDFA are studied on the basis of the Giles Model with ASE.展开更多
Bidirectional EDFAs(Bi-EDFAs)featuring bidirectional signal input are theoreticallystudied.Gain and noise performances of Bi-EDFAs are analysed numerically and comparedwith that of other optical amplifiers.Application...Bidirectional EDFAs(Bi-EDFAs)featuring bidirectional signal input are theoreticallystudied.Gain and noise performances of Bi-EDFAs are analysed numerically and comparedwith that of other optical amplifiers.Applications of Bi-EDFAs in fiber networks and otherfields are considered.展开更多
In this paper, new configuration is proposed, investigated and analyzed. Fiber laser and fiber amplifier are merged in one configuration which called Erbium Doped Fiber Laser and Amplifier (EDFLA) or integrating EDFL ...In this paper, new configuration is proposed, investigated and analyzed. Fiber laser and fiber amplifier are merged in one configuration which called Erbium Doped Fiber Laser and Amplifier (EDFLA) or integrating EDFL and EDFA in one design. The configuration has three main outputs;one for laser, second for amplifier and the third it can be used for on/off output. A surprising phenomenon was remarked during the operation of this configuration. The amplification is abolished during the lasing state and appeared again if the lasing is stopped or the switch is off. The difference between outputs with the lasing and without lasing has 30 dB EDFA gain value;it is a good sign that this optical configuration can be used as an on/off integrated optical device for fiber laser.展开更多
It is crucial to study the effect of radiation on the fiber amplifier devices. In the present paper, the Erbium-ytterbium co-doped fiber amplifier (EYDFA) has been irradiated by a neutron beam of different doses for v...It is crucial to study the effect of radiation on the fiber amplifier devices. In the present paper, the Erbium-ytterbium co-doped fiber amplifier (EYDFA) has been irradiated by a neutron beam of different doses for various exposure times from an Am-241/Be-9 neutron source. The gain and noise figure of the EYDFA have been calculated theoretically and recorded after and before the irradiation to test its performance under the effect of irradiation. In order to show the enhancement in the gain of the fiber amplifier devices, a comparison between the gain of the irradiated EYDFA and Erbium doped Fiber amplifier (EDFA) has been carried out. The calculated results by the proposed model are in good agreement with the experimental ones. It indicates that the gain of EYDFA deteriorates after being irradiated by a neutron dose. Moreover, the gain of irradiated EYDFA has been reduced to 13.8 dB at a dose of 720 Gy.展开更多
Optical channel pre-emphasis equalization is experimentally researched for a 270 km 40 × 40 Gbit/s wavelength division multiplexing （WDM） transmission system with three Erbium-doped fiber amplifiers （ED- FAs）...Optical channel pre-emphasis equalization is experimentally researched for a 270 km 40 × 40 Gbit/s wavelength division multiplexing （WDM） transmission system with three Erbium-doped fiber amplifiers （ED- FAs） and Raman amplifiers concatenated as booster amplifier. The channel imbalance of the overall system changes with different sets of power launched into EDFAs. By appropriately choosing the power input to concatenated EDFAs, the output spectrum of 40 channel signal can be equalized to the most extent. The merit of benefit can be around 5.5 dB by this pre-emphasis equalization. The requirement for the gain equalizer is therefore greatly released. Then the gain imbalance of the overall system and the power imbalance of 40 channels are compared and the two almost matches, but the significant difference lies on some channels. Finally, the pump power into Raman amplifier is also optimized, and another 1.3 dB improvement of channel equaliza- tion can be further achieved.展开更多
The rate equation model is setup for the signal gain, pump absorption and output noise spectrum of bidirectional EDFA (Bi EDFA) including numbers of signals, pumps of arbitrary direction, amplified spontaneous emissi...The rate equation model is setup for the signal gain, pump absorption and output noise spectrum of bidirectional EDFA (Bi EDFA) including numbers of signals, pumps of arbitrary direction, amplified spontaneous emission (ASE) and inherent loss. The influence of erbium doped fiber length, input signal power, pump style and pump power on the gain characteristics of Bi EDFA is analyzed. Forward and backward noise figure for different pump style versus bidirectional input signal power is investigated.展开更多
文摘The configuration of the novel three-stage L-band erbium-doped fiber amplifier with very large and flat gain and very low noise figure presented in this paper uses the forward ASE (amplified spontaneous emission) from the first section of the EDF (erbium-doped fiber) and the backward ASE from the third section of the EDF (both serve as the secondary pump sources of energy) to pump the second EDF. To improve the pump efficiency, the power of the pump is split into two parts (with a ratio of e.g. 2:7). The characteristics of this L-band EDFA are studied on the basis of the Giles Model with ASE.
基金a major project of the 8th Five-Year Plan of China.
文摘Bidirectional EDFAs(Bi-EDFAs)featuring bidirectional signal input are theoreticallystudied.Gain and noise performances of Bi-EDFAs are analysed numerically and comparedwith that of other optical amplifiers.Applications of Bi-EDFAs in fiber networks and otherfields are considered.
文摘In this paper, new configuration is proposed, investigated and analyzed. Fiber laser and fiber amplifier are merged in one configuration which called Erbium Doped Fiber Laser and Amplifier (EDFLA) or integrating EDFL and EDFA in one design. The configuration has three main outputs;one for laser, second for amplifier and the third it can be used for on/off output. A surprising phenomenon was remarked during the operation of this configuration. The amplification is abolished during the lasing state and appeared again if the lasing is stopped or the switch is off. The difference between outputs with the lasing and without lasing has 30 dB EDFA gain value;it is a good sign that this optical configuration can be used as an on/off integrated optical device for fiber laser.
文摘It is crucial to study the effect of radiation on the fiber amplifier devices. In the present paper, the Erbium-ytterbium co-doped fiber amplifier (EYDFA) has been irradiated by a neutron beam of different doses for various exposure times from an Am-241/Be-9 neutron source. The gain and noise figure of the EYDFA have been calculated theoretically and recorded after and before the irradiation to test its performance under the effect of irradiation. In order to show the enhancement in the gain of the fiber amplifier devices, a comparison between the gain of the irradiated EYDFA and Erbium doped Fiber amplifier (EDFA) has been carried out. The calculated results by the proposed model are in good agreement with the experimental ones. It indicates that the gain of EYDFA deteriorates after being irradiated by a neutron dose. Moreover, the gain of irradiated EYDFA has been reduced to 13.8 dB at a dose of 720 Gy.
基金the National Natural Science Foundation of China (60777024)
文摘Optical channel pre-emphasis equalization is experimentally researched for a 270 km 40 × 40 Gbit/s wavelength division multiplexing （WDM） transmission system with three Erbium-doped fiber amplifiers （ED- FAs） and Raman amplifiers concatenated as booster amplifier. The channel imbalance of the overall system changes with different sets of power launched into EDFAs. By appropriately choosing the power input to concatenated EDFAs, the output spectrum of 40 channel signal can be equalized to the most extent. The merit of benefit can be around 5.5 dB by this pre-emphasis equalization. The requirement for the gain equalizer is therefore greatly released. Then the gain imbalance of the overall system and the power imbalance of 40 channels are compared and the two almost matches, but the significant difference lies on some channels. Finally, the pump power into Raman amplifier is also optimized, and another 1.3 dB improvement of channel equaliza- tion can be further achieved.
文摘The rate equation model is setup for the signal gain, pump absorption and output noise spectrum of bidirectional EDFA (Bi EDFA) including numbers of signals, pumps of arbitrary direction, amplified spontaneous emission (ASE) and inherent loss. The influence of erbium doped fiber length, input signal power, pump style and pump power on the gain characteristics of Bi EDFA is analyzed. Forward and backward noise figure for different pump style versus bidirectional input signal power is investigated.
