BACKGROUND Distal humerus elbow fractures are one of the most common traumatic fractures seen in pediatric patients and present as three main types:Supracondylar(SC),lateral condyle(LC),and medial epicondyle(ME)fractu...BACKGROUND Distal humerus elbow fractures are one of the most common traumatic fractures seen in pediatric patients and present as three main types:Supracondylar(SC),lateral condyle(LC),and medial epicondyle(ME)fractures.AIM To evaluate the epidemiology of pediatric distal humerus fractures(SC,LC,and ME)from an American insurance claims database.METHODS A retrospective review was performed on patients 17 years and younger with the ICD 9 and 10 codes for SC,LC and ME fractures based on the IBM Truven MarketScan®Commercial and IBM Truven MarketScan Medicare Supplemental databases.Patients from 2015 to 2020 were queried for treatments,patient age,sex,length of hospitalization,and comorbidities.RESULTS A total of 1133 SC,154 LC,and 124 ME fractures were identified.SC fractures had the highest percentage of operation at 83%,followed by LC(78%)and ME fractures(41%).Male patients were,on average,older than female patients for both SC and ME fractures.CONCLUSION In the insurance claims databases used,SC fractures were the most reported,followed by LC fractures,and finally ME fractures.Age was identified to be a factor for how a pediatric distal humerus fractures,with patients with SC and LC fractures being younger than those with ME fractures.The peak age per injury per sex was similar to reported historic central tendencies,despite reported trends for younger physiologic development.展开更多
BACKGROUND Hand in hand with technological advancements,treatment modalities continue to grow.With the turn of the century,the internet has become the number one source of information for almost every topic.Thus,many ...BACKGROUND Hand in hand with technological advancements,treatment modalities continue to grow.With the turn of the century,the internet has become the number one source of information for almost every topic.Thus,many patients look toward the internet as their primary source of information to learn about their respective medical conditions.The American Medical Association and National Institute of Health strongly recommend that online medical information be written at the 6th to 8th-grade level to aid comprehension by patients of all literacy backgrounds.AIM To assess the readability of online information regarding Jones fracture.Our hypothesis is that the reading level of medical information published on websites far exceeds the recommended reading level of 6th-8th grade as proposed by the American Medical Associate and National Institute of Health.The result of this study can help us formulate improved recommendations for publishing more comprehensible material and,thus,eventually improve patient compliance and clinical outcomes.METHODS The exact phrase“Jones fracture”was queried on the three most common search engines,Google,Yahoo!,and Bing,on December 28,2022.As of December 2022,Google held 84%,Bing held 9%,and Yahoo!held 2%of the worldwide search engine market share.Web pages uniform resource locator from the first three pages of search results were recorded from each search engine.These web pages were classified according to academic,physician-sponsored,governmental and non-government organizations(NGO),commercial,and unspecified as per formally defined categories.Websites associated with an educational institution or medical organization were classified as academic.Websites with products for sale,corporate sponsorship,or advertisements were classified as commercial.Governmental websites or NGOs comprised those that received government subsidies or grants.Webpages that were independently owned by physicians or physician groups were respectively classed as physician sponsored.The remainder of websites that did not fall under the above categories were classified as unspecified.RESULTS A total of 93 websites were analyzed for reading assessment.A whopping 44%of websites were commercial,followed by 22%of physician-sponsored websites.Third place belonged to non-government organization websites holding a 15%share.The academic website held a meager 9%portion,while unspecified sites were 3%.The table illustrates mean readability scores,along with average cumulative grade level.The average grade level was 10.95±2.28 for all websites,with a range of 6.18 to 18.90.Since P values were more than 0.05,there was not a significant statistical difference between the first page results and the results of all pages.Thus,we can rationalize that readability scores are consistent throughout all pages of a website.CONCLUSION Hand in hand with technological advancements,treatment modalities continue to grow.With the turn of the century,the internet has become the number one source of information for almost every topic.Thus,many patients look towards the internet as the primary source of information to learn about their respective medical conditions.Our study demonstrates that current online medical information regarding Jones fracture is written at an extraordinarily high-grade level,with an average grade level of all websites at 10.95,nearly an 10th-grade educational level.The American Medical Association and National Institute of Health strongly recommend that online medical information should be written at the 6th to 8th-grade level to aid comprehension by patients of all literacy backgrounds.On the contrary,most of the medical information evaluated was at an 10th-grade level,which far exceeds recommendations by AMA and NIH.This is particularly relevant because readability scores are directly proportional to the level of comprehension attained by readers,thus directly impacting patient outcomes.In conclusion,we suggest and encourage that all online reading materials should be re-written at the 6th to 8th-grade level in a public service effort to increase compliance with treatment goals and raise awareness of preventive measures.展开更多
BACKGROUND Although percutaneous vertebral augmentation(PVA)is a commonly used procedure for treating vertebral compression fracture(VCF),the risk of vertebral refracture should be considered.Chronic kidney disease-mi...BACKGROUND Although percutaneous vertebral augmentation(PVA)is a commonly used procedure for treating vertebral compression fracture(VCF),the risk of vertebral refracture should be considered.Chronic kidney disease-mineral and bone disorder(CKD-MBD)is a systemic disease of mineral and bone metabolism.It is associated with an increased risk of fracture.Few studies have reported the use of PVA in patients with CKD-MBD.We herein report a rare case wherein the cemented vertebra and the adjacent vertebra refractured simultaneously in a CKD-MBD patient after PVA.CASE SUMMARY A 74-year-old man suffered from low back pain after taking a fall about 3 wk ago.According to physical examination,imaging and laboratory findings,diagnoses of T12 VCF,CKD-MBD,and chronic kidney disease stage 5 were established.He then received percutaneous vertebroplasty at T12 vertebra.Fourteen weeks later,he presented with T12 and L1 vertebral refractures caused by lumbar sprain.Once again,he was given PVA which was optimized for the refractured vertebrae.Although the short-term postoperative effect was satisfactory,he reported chronic low back pain again at the 3-month follow-up.CONCLUSION It is necessary that patients with CKD-MBD who have received PVA are aware of the adverse effects of CKD-MBD.It may increase the risk of vertebral refracture.Furthermore,the PVA surgical technique needs to be optimized according to the condition of the patient.The medium-and long-term effects of PVA remain uncertain in patients with CKD-MBD.展开更多
Purpose: This study aims to investigate the predictive value of blood calcium in the prognosis of traumatic fracture. Methods: A retrospective experimental design was employed, 112 cases (52 non-fracture and 60 trauma...Purpose: This study aims to investigate the predictive value of blood calcium in the prognosis of traumatic fracture. Methods: A retrospective experimental design was employed, 112 cases (52 non-fracture and 60 traumatic fracture) were randomly selected. The type of fracture complies with WHO-recommended (2019) diagnostic criteria for osteoporosis combined with fracture. The blood pressure (BP) was measured by OMRON’s HEM-7136 model electronic blood pressure monitor. Blood calcium (Ca<sup>2+</sup>), and blood phosphorus (P) values were measured using Colorimetric Roche kits on a Roche/Hitachi fully automated biochemical analyzer. Data collection and analysis followed. Results: Higher levels of age, systolic and diastolic blood pressures were found in the traumatic fracture group compared to the control group, whereas weight, height, and blood phosphorus did not differ significantly (P adjusting for age, systolic blood pressure, diastolic blood pressure, and blood phosphorus, binary logistic regression analysis revealed that blood calcium was a protective factor against traumatic fracture (β = -26.85, OR = 0.00, 95% CI = 0.00 -0.02, P = 0.022). Conclusion: The findings suggest that high and low blood calcium levels may serve as useful indicators in predicting the prognosis of fractures resulting from trauma.展开更多
An open-source MATLAB application(app)named Discontinuity Intensity Calculator and Estimator(DICE)was developed in order to quantitatively characterize the fractures,or in more general,discontinuities within a rocky o...An open-source MATLAB application(app)named Discontinuity Intensity Calculator and Estimator(DICE)was developed in order to quantitatively characterize the fractures,or in more general,discontinuities within a rocky outcrop in three-dimensional(3D)digital data,such as digital outcrop model(DOM).The workflow proposed for the parametrization of the discontinuities consists of the following steps:(1)Analysis and mapping of the fractures detected within the 3D DOMs;(2)Calculation of the orientation,position and dimensions of discontinuities that are represented by best-fit circular planes;(3)Determining the discontinuity parameters(dimension,distribution,spacing and intensity)by the DICE algorithm using different 3D oriented sampling techniques(3D oriented scanline,3D oriented circular scan window and spherical scan volume).Different sampling methods were bench tested with a synthetic,as well as a natural case study,and compared in order to understand the advantages and limitations of each technique.The 3D oriented circular scan window appears to be the most effective method for fracture intensity estimation with high accuracy(error 0.4%)and stability with variations in scan radius.展开更多
Radial borehole fracturing that combines radial boreholes with hydraulic fracturing is anticipated to improve the output of tight oil and gas reservoirs.This paper aims to investigate fracture propagation and pressure...Radial borehole fracturing that combines radial boreholes with hydraulic fracturing is anticipated to improve the output of tight oil and gas reservoirs.This paper aims to investigate fracture propagation and pressure characteristics of radial borehole fracturing in multiple layers.A series of laboratory experiments with artificial rock samples(395 mm×395 mm×395 mm)was conducted using a true triaxial fracturing device.Three crucial factors corresponding to the vertical distance of adjacent radial borehole layers(vertical distance),the azimuth and diameter of the radial borehole are examined.Experimental results show that radial borehole fracturing in multiple layers generates diverse fracture geometries.Four types of fractures are identified based on the connectivity between hydraulic fractures and radial boreholes.The vertical distance significantly influences fracture propagation perpendicular to the radial borehole axis.An increase in the vertical distance impedes fracture connection across multiple radial borehole layers and reduces the fracture propagation distance along the radial borehole axis.The azimuth also influences fracture propagation along the radial borehole axis.Increasing the azimuth reduces the guiding ability of radial boreholes,which makes the fracture quickly curve to the maximum horizontal stress direction.The breakdown pressure correlates with diverse fracture geometries observed.When the fractures connect multi-layer radial boreholes,increasing the vertical distance decreases the breakdown pressure.Decreasing the azimuth and increasing the diameter also decrease the breakdown pressure.The extrusion force exists between the adjacent fractures generated in radial boreholes in multiple rows,which plays a crucial role in enhancing the guiding ability of radial boreholes and results in higher breakdown pressure.The research provides valuable theoretical insights for the field application of radial borehole fracturing technology in tight oil and gas reservoirs.展开更多
Shale gas is an important component of unconventional oil and gas resources.Studying the imbibition behavior is helpful to optimize flowback parameters and enhance gas recovery.Recent imbibition studies have focused o...Shale gas is an important component of unconventional oil and gas resources.Studying the imbibition behavior is helpful to optimize flowback parameters and enhance gas recovery.Recent imbibition studies have focused on shale matrix,and the pressure conditions discussed were mostly atmospheric.The initial imbibition behavior begins from propped fractures to matrix,but there are few studies working on explaining the imbibition behavior in propped fractures or the phenomenon of many shale wells exhibit higher productivity after a“soaking”period.Therefore,propped fracture samples were designed for imbibition and migration experiments.In order to accurately study the mechanism and main influencing factors of fracturing fluid imbibition and migration in propped and unpropped shale fractures under high temperature and high pressure,a series of experiments based on nuclear magnetic resonance(NMR)were carried out.Results showed that NMR T2 spectra of all samples exhibited a bimodal distribution.The final imbibition volume of fracturing fluid was positively related to pressure and fracture width.The imbibition effect of fracturing fluid was more evident in matrix pores under high pressure.In the migration during soaking stage,the fracturing fluid gradually migrated from large pores to small pores and gradually displaced the shale gas from the matrix,thus allowing the water blocking in propped fractures to self-unlock to some extent.Gas permeability decreased in the imbibition stage,while it recovered in the migration stage to some extent.展开更多
Polymer flooding in fractured wells has been extensively applied in oilfields to enhance oil recovery.In contrast to water,polymer solution exhibits non-Newtonian and nonlinear behavior such as effects of shear thinni...Polymer flooding in fractured wells has been extensively applied in oilfields to enhance oil recovery.In contrast to water,polymer solution exhibits non-Newtonian and nonlinear behavior such as effects of shear thinning and shear thickening,polymer convection,diffusion,adsorption retention,inaccessible pore volume and reduced effective permeability.Meanwhile,the flux density and fracture conductivity along the hydraulic fracture are generally non-uniform due to the effects of pressure distribution,formation damage,and proppant breakage.In this paper,we present an oil-water two-phase flow model that captures these complex non-Newtonian and nonlinear behavior,and non-uniform fracture characteristics in fractured polymer flooding.The hydraulic fracture is firstly divided into two parts:high-conductivity fracture near the wellbore and low-conductivity fracture in the far-wellbore section.A hybrid grid system,including perpendicular bisection(PEBI)and Cartesian grid,is applied to discrete the partial differential flow equations,and the local grid refinement method is applied in the near-wellbore region to accurately calculate the pressure distribution and shear rate of polymer solution.The combination of polymer behavior characterizations and numerical flow simulations are applied,resulting in the calculation for the distribution of water saturation,polymer concentration and reservoir pressure.Compared with the polymer flooding well with uniform fracture conductivity,this non-uniform fracture conductivity model exhibits the larger pressure difference,and the shorter bilinear flow period due to the decrease of fracture flow ability in the far-wellbore section.The field case of the fall-off test demonstrates that the proposed method characterizes fracture characteristics more accurately,and yields fracture half-lengths that better match engineering reality,enabling a quantitative segmented characterization of the near-wellbore section with high fracture conductivity and the far-wellbore section with low fracture conductivity.The novelty of this paper is the analysis of pressure performances caused by the fracture dynamics and polymer rheology,as well as an analysis method that derives formation and fracture parameters based on the pressure and its derivative curves.展开更多
With an extension of the geological entropy concept in porous media,the approach called directional entrogram is applied to link hydraulic behavior to the anisotropy of the 3D fracture networks.A metric called directi...With an extension of the geological entropy concept in porous media,the approach called directional entrogram is applied to link hydraulic behavior to the anisotropy of the 3D fracture networks.A metric called directional entropic scale is used to measure the anisotropy of spatial order in different directions.Compared with the traditional connectivity indexes based on the statistics of fracture geometry,the directional entropic scale is capable to quantify the anisotropy of connectivity and hydraulic conductivity in heterogeneous 3D fracture networks.According to the numerical analysis of directional entrogram and fluid flow in a number of the 3D fracture networks,the hydraulic conductivities and entropic scales in different directions both increase with spatial order(i.e.,trace length decreasing and spacing increasing)and are independent of the dip angle.As a result,the nonlinear correlation between the hydraulic conductivities and entropic scales from different directions can be unified as quadratic polynomial function,which can shed light on the anisotropic effect of spatial order and global entropy on the heterogeneous hydraulic behaviors.展开更多
The aperture of natural rock fractures significantly affects the deformation and strength properties of rock masses,as well as the hydrodynamic properties of fractured rock masses.The conventional measurement methods ...The aperture of natural rock fractures significantly affects the deformation and strength properties of rock masses,as well as the hydrodynamic properties of fractured rock masses.The conventional measurement methods are inadequate for collecting data on high-steep rock slopes in complex mountainous regions.This study establishes a high-resolution three-dimensional model of a rock slope using unmanned aerial vehicle(UAV)multi-angle nap-of-the-object photogrammetry to obtain edge feature points of fractures.Fracture opening morphology is characterized using coordinate projection and transformation.Fracture central axis is determined using vertical measuring lines,allowing for the interpretation of aperture of adaptive fracture shape.The feasibility and reliability of the new method are verified at a construction site of a railway in southeast Tibet,China.The study shows that the fracture aperture has a significant interval effect and size effect.The optimal sampling length for fractures is approximately 0.5e1 m,and the optimal aperture interpretation results can be achieved when the measuring line spacing is 1%of the sampling length.Tensile fractures in the study area generally have larger apertures than shear fractures,and their tendency to increase with slope height is also greater than that of shear fractures.The aperture of tensile fractures is generally positively correlated with their trace length,while the correlation between the aperture of shear fractures and their trace length appears to be weak.Fractures of different orientations exhibit certain differences in their distribution of aperture,but generally follow the forms of normal,log-normal,and gamma distributions.This study provides essential data support for rock and slope stability evaluation,which is of significant practical importance.展开更多
Heat transfer and temperature evolution in overburden fracture and ground fissures are one of the essential topics for the identification of ground fissures via unmanned aerial vehicle(UAV) infrared imager. In this st...Heat transfer and temperature evolution in overburden fracture and ground fissures are one of the essential topics for the identification of ground fissures via unmanned aerial vehicle(UAV) infrared imager. In this study, discrete element software UDEC was employed to investigate the overburden fracture field under different mining conditions. Multiphysics software COMSOL were employed to investigate heat transfer and temperature evolution of overburden fracture and ground fissures under the influence of mining condition, fissure depth, fissure width, and month alternation. The UAV infrared field measurements also provided a calibration for numerical simulation. The results showed that for ground fissures connected to underground goaf(Fissure Ⅰ), the temperature difference increased with larger mining height and shallow buried depth. In addition, Fissure Ⅰ located in the boundary of the goaf have a greater temperature difference and is easier to be identified than fissures located above the mining goaf. For ground fissures having no connection to underground goaf(Fissure Ⅱ), the heat transfer is affected by the internal resistance of the overlying strata fracture when the depth of Fissure Ⅱ is greater than10 m, the temperature of Fissure Ⅱ gradually equals to the ground temperature as the fissures’ depth increases, and the fissures are difficult to be identified. The identification effect is most obvious for fissures larger than 16 cm under the same depth. In spring and summer, UAV infrared identification of mining fissures should be carried out during nighttime. This study provides the basis for the optimal time and season for the UAV infrared identification of different types of mining ground fissures.展开更多
Lost circulation is a common downhole problem of drilling in geothermal and high-temperature,high-pressure(HTHP)formations.Lost circulation material(LCM)is a regular preventive and remedial measure for lost circulatio...Lost circulation is a common downhole problem of drilling in geothermal and high-temperature,high-pressure(HTHP)formations.Lost circulation material(LCM)is a regular preventive and remedial measure for lost circulation.However,conventional LCMs seem ineffective in high-temperature formations.This may be due to the changes in the mechanical properties of LCMs and their sealing performance under high-temperature conditions.To understand how high temperature affects the fracture sealing performance of LCMs,we developed a coupled computational fluid dynamics-discrete element method(CFD-DEM)model to simulate the behavior of granular LCMs in fractures.We summarized the literature on the effects of high temperature on the mechanical properties of LCMs and the rheological properties of drilling fluid.We conducted sensitivity analyses to investigate how changing LCM slurry properties affected the fracture sealing efficiency at increasing temperatures.The results show that high temperature reduces the size,strength,and friction coefficient of LCMs as well as the drilling fluid viscosity.Smaller,softer,and less frictional LCM particles have lower bridging probability and slower bridging initiation.Smaller particles tend to form dual-particle bridges rather than single-particle bridges.These result in a deeper,tighter,but unstable sealing zone.Reduced drilling fluid viscosity leads to faster and shallower sealing zones.展开更多
The surrounding rock of roadways exhibits intricate characteristics of discontinuity and heterogeneity.To address these complexities,this study employs non-local Peridynamics(PD)theory and reconstructs the kernel func...The surrounding rock of roadways exhibits intricate characteristics of discontinuity and heterogeneity.To address these complexities,this study employs non-local Peridynamics(PD)theory and reconstructs the kernel function to represent accurately the spatial decline of long-range force.Additionally,modifications to the traditional bondbased PD model are made.By considering the micro-structure of coal-rock materials within a uniform discrete model,heterogeneity characterized by bond random pre-breaking is introduced.This approach facilitates the proposal of a novel model capable of handling the random distribution characteristics of material heterogeneity,rendering the PD model suitable for analyzing the deformation and failure of heterogeneous layered coal-rock mass structures.The established numerical model and simulation method,termed the sub-homogeneous PD model,not only incorporates the support effect but also captures accurately the random heterogeneous micro-structure of roadway surrounding rock.The simulation results obtained using this model show good agreement with field measurements from the Fucun coal mine,effectively validating the model’s capability in accurately reproducing the deformation and failure mode of surrounding rock under bolt-supported(anchor cable).The proposed subhomogeneous PD model presents a valuable and effective simulation tool for studying the deformation and failure of roadway surrounding rock in coal mines,offering new insights and potential advancements.展开更多
For expedited transportation,vehicular tunnels are often designed as two adjacent tunnels,which frequently experience dynamic stress waves from various orientations during blasting excavation.To analyze the impact of ...For expedited transportation,vehicular tunnels are often designed as two adjacent tunnels,which frequently experience dynamic stress waves from various orientations during blasting excavation.To analyze the impact of dynamic loading orientation on the stability of the twin-tunnel,a split Hopkinson pressure bar(SHPB)apparatus was used to conduct a dynamic test on the twin-tunnel specimens.The two tunnels were rotated around the specimen’s center to consider the effect of dynamic loading orientation.LS-DYNA software was used for numerical simulation to reveal the failure properties and stress wave propagation law of the twin-tunnel specimens.The findings indicate that,for a twin-tunnel exposed to a dynamic load from different orientations,the crack initiation position appears most often at the tunnel corner,tunnel spandrel,and tunnel floor.As the impact direction is created by a certain angle(30°,45°,60°,120°,135°,and 150°),the fractures are produced in the middle of the line between the left tunnel corner and the right tunnel spandrel.As the impact loading angle(a)is 90°,the tunnel sustains minimal damage,and only tensile fractures form in the surrounding rocks.The orientation of the impact load could change the stress distribution in the twin-tunnel,and major fractures are more likely to form in areas where the tensile stress is concentrated.展开更多
Due to the presence of ice and unfrozen water in pores of frozen rock,the rock fracture behaviors are susceptible to temperature.In this study,the potential thawing-induced softening effects on the fracture behaviors ...Due to the presence of ice and unfrozen water in pores of frozen rock,the rock fracture behaviors are susceptible to temperature.In this study,the potential thawing-induced softening effects on the fracture behaviors of frozen rock is evaluated by testing the tension fracture toughness(KIC)of frozen rock at different temperatures(i.e.-20℃,-15℃,-12℃,-10℃,-8℃,-6℃,-4℃,-2℃,and 0℃).Acoustic emission(AE)and digital image correlation(DIC)methods are utilized to analyze the microcrack propagation during fracturing.The melting of pore ice is measured using nuclear magnetic resonance(NMR)method.The results indicate that:(1)The KIC of frozen rock decreases moderately between-20℃ and-4℃,and rapidly between-4℃ and 0℃.(2)At-20℃ to-4℃,the fracturing process,deduced from the DIC results at the notch tip,exhibits three stages:elastic deformation,microcrack propagation and microcrack coalescence.However,at-4℃e0℃,only the latter two stages are observed.(3)At-4℃e0℃,the AE activities during fracturing are less than that at-20℃ to-4℃,while more small events are reported.(4)The NMR results demonstrate a reverse variation trend in pore ice content with increasing temperature,that is,a moderate decrease is followed by a sharp decrease and-4℃ is exactly the critical temperature.Next,we interpret the thawing-induced softening effect by linking the evolution in microscopic structure of frozen rock with its macroscopic fracture behaviors as follow:from-20℃ to-4℃,the thickening of the unfrozen water film diminishes the cementation strength between ice and rock skeleton,leading to the decrease in fracture parameters.From-4℃ to 0℃,the cementation effect of ice almost vanishes,and the filling effect of pore ice is reduced significantly,which facilitates microcrack propagation and thus the easier fracture of frozen rocks.展开更多
Grouting is a widely used approach to reinforce broken surrounding rock mass during the construction of underground tunnels in fault fracture zones,and its reinforcement effectiveness is highly affected by geostress.I...Grouting is a widely used approach to reinforce broken surrounding rock mass during the construction of underground tunnels in fault fracture zones,and its reinforcement effectiveness is highly affected by geostress.In this study,a numerical manifold method(NMM)based simulator has been developed to examine the impact of geostress conditions on grouting reinforcement during tunnel excavation.To develop this simulator,a detection technique for identifying slurry migration channels and an improved fluid-solid coupling(FeS)framework,which considers the influence of fracture properties and geostress states,is developed and incorporated into a zero-thickness cohesive element(ZE)based NMM(Co-NMM)for simulating tunnel excavation.Additionally,to simulate coagulation of injected slurry,a bonding repair algorithm is further proposed based on the ZE model.To verify the accuracy of the proposed simulator,a series of simulations about slurry migration in single fractures and fracture networks are numerically reproduced,and the results align well with analytical and laboratory test results.Furthermore,these numerical results show that neglecting the influence of geostress condition can lead to a serious over-estimation of slurry migration range and reinforcement effectiveness.After validations,a series of simulations about tunnel grouting reinforcement and tunnel excavation in fault fracture zones with varying fracture densities under different geostress conditions are conducted.Based on these simula-tions,the influence of geostress conditions and the optimization of grouting schemes are discussed.展开更多
Accurate simulation of the cracking process caused by rust expansion of reinforced concrete(RC)structures plays an intuitive role in revealing the corrosion-induced failure mechanism.Considering the quasi-brittle frac...Accurate simulation of the cracking process caused by rust expansion of reinforced concrete(RC)structures plays an intuitive role in revealing the corrosion-induced failure mechanism.Considering the quasi-brittle fracture of concrete,the fracture phase field driven by the compressive-shear term is constructed and added to the traditional brittle fracture phase field model.The rationality of the proposed model is verified by a mixed fracture example under a shear displacement load.Then,the extended fracture phase model is applied to simulate the corrosion-induced cracking process of RC.The cracking patterns caused by non-uniform corrosion expansion are discussed for RC specimens with homogeneous macroscopically or heterogeneous with different polygonal aggregate distributions at the mesoscopic scale.Then,the effects of the protective layer on the crack propagation trajectory and cracking resistance are investigated,illustrating that the cracking angle and cracking resistance increase with the increase of the protective layer thickness,consistent with the experimental observation.Finally,the corrosion-induced cracking process of concrete specimens with large and small spacing rebars is simulated,and the interaction of multiple corrosion cracking is easily influenced by the reinforcement spacing,which increases with the decrease of the steel bar interval.These conclusions play an important role in the design of engineering anti-corrosion measures.The fracture phase field model can provide strong support for the life assessment of RC structures.展开更多
●AIM:To explore the combined application of surgical navigation nasal endoscopy(NNE)and three-dimensional printing technology(3DPT)for the adjunctive treatment of orbital blowout fractures(OBF).●METHODS:Retrospectiv...●AIM:To explore the combined application of surgical navigation nasal endoscopy(NNE)and three-dimensional printing technology(3DPT)for the adjunctive treatment of orbital blowout fractures(OBF).●METHODS:Retrospective analysis was conducted on the data of patients with OBF who underwent surgical treatment at the Affiliated Eye Hospital of Nanchang University between July 2012 and November 2022.The control group consisted of patients who received traditional surgical treatment(n=43),while the new surgical group(n=52)consisted of patients who received NNE with 3DPT.The difference in therapeutic effects between the two groups was evaluated by comparing the duration of the operation,best corrected visual acuity(BCVA),enophthalmos difference,recovery rate of eye movement disorder,recovery rate of diplopia,and incidence of postoperative complications.●RESULTS:The study included 95 cases(95 eyes),with 63 men and 32 women.The patients’age ranged from 5 to 67y(35.21±15.75y).The new surgical group and the control group exhibited no statistically significant differences in the duration of the operation,BCVA and enophthalmos difference.The recovery rates of diplopia in the new surgical group were significantly higher than those in the control group at 1mo[OR=0.03,95%CI(0.01–0.15),P<0.0000]and 3mo[OR=0.11,95%CI(0.03–0.36),P<0.0000]postoperation.Additionally,the recovery rates of eye movement disorders at 1 and 3mo after surgery were OR=0.08,95%CI(0.03–0.24),P<0.0000;and OR=0.01,95%CI(0.00–0.18),P<0.0000.The incidence of postoperative complications was lower in the new surgical group compared to the control group[OR=4.86,95%CI(0.95–24.78),P<0.05].●CONCLUSION:The combination of NNE and 3DPT can shorten the recovery time of diplopia and eye movement disorder in patients with OBF.展开更多
Stability analysis of underground constructions requires a model study of rock masses’ long-term performance. Creep tests under different stress conditions was conducted on intact granite and granite samples fracture...Stability analysis of underground constructions requires a model study of rock masses’ long-term performance. Creep tests under different stress conditions was conducted on intact granite and granite samples fractured at 30° and 45° angles. The experimental results indicate that the steady creep strain rates of intact and fractured rock present an exponential increase trend with the increase of stress level. A nonlinear creep model is developed based on the experimental results, in which the initial damage caused by fracture together with the damage caused by constant load have been taken into consideration. The fitting analysis results indicated that the model proposed is more accurate at identifying the full creep regions in fractured granite, especially the accelerated stage of creep deformation. The least-square fit error of the proposed creep model is significantly lower than that of Nishihara model by almost an order of magnitude. An analysis of the effects of elastic modulus, viscosity coefficient, and damage factors on fractured rock strain rate and creep strain is conducted. If no consideration is given to the effects of the damage, the proposed nonlinear creep model can degenerate into to the classical Nishihara model.展开更多
Fault fractures usually have large openings and considerable extension. Accordingly, cross-linked gel materials aregenerally considered more suitable plugging agents than water-based gels because the latter often unde...Fault fractures usually have large openings and considerable extension. Accordingly, cross-linked gel materials aregenerally considered more suitable plugging agents than water-based gels because the latter often undergo contaminationvia formation water, which prevents them from being effective over long times. Hence, in this study, aset of oil-based composite gels based on waste grease and epoxy resin has been developed. These materials havebeen observed to possess high compressive strength and resistance to the aforementioned contamination, therebyleading to notable increase in plugging success rate. The compressive strength, thickening time, and resistance toformation water pollution of these gels have been evaluated indoors. The results show that the compressivestrength of the gel can reach 11 MPa;additionally, the related gelation time can be controlled to be more than3 h, thereby providing a safe construction time;Invasion of formation water has a small effect on the gel strengthand does not shorten the thickening time. All considered performance indicators of the oil-based gel confirm itssuitability as a plugging agent for fault fractures.展开更多
文摘BACKGROUND Distal humerus elbow fractures are one of the most common traumatic fractures seen in pediatric patients and present as three main types:Supracondylar(SC),lateral condyle(LC),and medial epicondyle(ME)fractures.AIM To evaluate the epidemiology of pediatric distal humerus fractures(SC,LC,and ME)from an American insurance claims database.METHODS A retrospective review was performed on patients 17 years and younger with the ICD 9 and 10 codes for SC,LC and ME fractures based on the IBM Truven MarketScan®Commercial and IBM Truven MarketScan Medicare Supplemental databases.Patients from 2015 to 2020 were queried for treatments,patient age,sex,length of hospitalization,and comorbidities.RESULTS A total of 1133 SC,154 LC,and 124 ME fractures were identified.SC fractures had the highest percentage of operation at 83%,followed by LC(78%)and ME fractures(41%).Male patients were,on average,older than female patients for both SC and ME fractures.CONCLUSION In the insurance claims databases used,SC fractures were the most reported,followed by LC fractures,and finally ME fractures.Age was identified to be a factor for how a pediatric distal humerus fractures,with patients with SC and LC fractures being younger than those with ME fractures.The peak age per injury per sex was similar to reported historic central tendencies,despite reported trends for younger physiologic development.
文摘BACKGROUND Hand in hand with technological advancements,treatment modalities continue to grow.With the turn of the century,the internet has become the number one source of information for almost every topic.Thus,many patients look toward the internet as their primary source of information to learn about their respective medical conditions.The American Medical Association and National Institute of Health strongly recommend that online medical information be written at the 6th to 8th-grade level to aid comprehension by patients of all literacy backgrounds.AIM To assess the readability of online information regarding Jones fracture.Our hypothesis is that the reading level of medical information published on websites far exceeds the recommended reading level of 6th-8th grade as proposed by the American Medical Associate and National Institute of Health.The result of this study can help us formulate improved recommendations for publishing more comprehensible material and,thus,eventually improve patient compliance and clinical outcomes.METHODS The exact phrase“Jones fracture”was queried on the three most common search engines,Google,Yahoo!,and Bing,on December 28,2022.As of December 2022,Google held 84%,Bing held 9%,and Yahoo!held 2%of the worldwide search engine market share.Web pages uniform resource locator from the first three pages of search results were recorded from each search engine.These web pages were classified according to academic,physician-sponsored,governmental and non-government organizations(NGO),commercial,and unspecified as per formally defined categories.Websites associated with an educational institution or medical organization were classified as academic.Websites with products for sale,corporate sponsorship,or advertisements were classified as commercial.Governmental websites or NGOs comprised those that received government subsidies or grants.Webpages that were independently owned by physicians or physician groups were respectively classed as physician sponsored.The remainder of websites that did not fall under the above categories were classified as unspecified.RESULTS A total of 93 websites were analyzed for reading assessment.A whopping 44%of websites were commercial,followed by 22%of physician-sponsored websites.Third place belonged to non-government organization websites holding a 15%share.The academic website held a meager 9%portion,while unspecified sites were 3%.The table illustrates mean readability scores,along with average cumulative grade level.The average grade level was 10.95±2.28 for all websites,with a range of 6.18 to 18.90.Since P values were more than 0.05,there was not a significant statistical difference between the first page results and the results of all pages.Thus,we can rationalize that readability scores are consistent throughout all pages of a website.CONCLUSION Hand in hand with technological advancements,treatment modalities continue to grow.With the turn of the century,the internet has become the number one source of information for almost every topic.Thus,many patients look towards the internet as the primary source of information to learn about their respective medical conditions.Our study demonstrates that current online medical information regarding Jones fracture is written at an extraordinarily high-grade level,with an average grade level of all websites at 10.95,nearly an 10th-grade educational level.The American Medical Association and National Institute of Health strongly recommend that online medical information should be written at the 6th to 8th-grade level to aid comprehension by patients of all literacy backgrounds.On the contrary,most of the medical information evaluated was at an 10th-grade level,which far exceeds recommendations by AMA and NIH.This is particularly relevant because readability scores are directly proportional to the level of comprehension attained by readers,thus directly impacting patient outcomes.In conclusion,we suggest and encourage that all online reading materials should be re-written at the 6th to 8th-grade level in a public service effort to increase compliance with treatment goals and raise awareness of preventive measures.
文摘BACKGROUND Although percutaneous vertebral augmentation(PVA)is a commonly used procedure for treating vertebral compression fracture(VCF),the risk of vertebral refracture should be considered.Chronic kidney disease-mineral and bone disorder(CKD-MBD)is a systemic disease of mineral and bone metabolism.It is associated with an increased risk of fracture.Few studies have reported the use of PVA in patients with CKD-MBD.We herein report a rare case wherein the cemented vertebra and the adjacent vertebra refractured simultaneously in a CKD-MBD patient after PVA.CASE SUMMARY A 74-year-old man suffered from low back pain after taking a fall about 3 wk ago.According to physical examination,imaging and laboratory findings,diagnoses of T12 VCF,CKD-MBD,and chronic kidney disease stage 5 were established.He then received percutaneous vertebroplasty at T12 vertebra.Fourteen weeks later,he presented with T12 and L1 vertebral refractures caused by lumbar sprain.Once again,he was given PVA which was optimized for the refractured vertebrae.Although the short-term postoperative effect was satisfactory,he reported chronic low back pain again at the 3-month follow-up.CONCLUSION It is necessary that patients with CKD-MBD who have received PVA are aware of the adverse effects of CKD-MBD.It may increase the risk of vertebral refracture.Furthermore,the PVA surgical technique needs to be optimized according to the condition of the patient.The medium-and long-term effects of PVA remain uncertain in patients with CKD-MBD.
文摘Purpose: This study aims to investigate the predictive value of blood calcium in the prognosis of traumatic fracture. Methods: A retrospective experimental design was employed, 112 cases (52 non-fracture and 60 traumatic fracture) were randomly selected. The type of fracture complies with WHO-recommended (2019) diagnostic criteria for osteoporosis combined with fracture. The blood pressure (BP) was measured by OMRON’s HEM-7136 model electronic blood pressure monitor. Blood calcium (Ca<sup>2+</sup>), and blood phosphorus (P) values were measured using Colorimetric Roche kits on a Roche/Hitachi fully automated biochemical analyzer. Data collection and analysis followed. Results: Higher levels of age, systolic and diastolic blood pressures were found in the traumatic fracture group compared to the control group, whereas weight, height, and blood phosphorus did not differ significantly (P adjusting for age, systolic blood pressure, diastolic blood pressure, and blood phosphorus, binary logistic regression analysis revealed that blood calcium was a protective factor against traumatic fracture (β = -26.85, OR = 0.00, 95% CI = 0.00 -0.02, P = 0.022). Conclusion: The findings suggest that high and low blood calcium levels may serve as useful indicators in predicting the prognosis of fractures resulting from trauma.
文摘An open-source MATLAB application(app)named Discontinuity Intensity Calculator and Estimator(DICE)was developed in order to quantitatively characterize the fractures,or in more general,discontinuities within a rocky outcrop in three-dimensional(3D)digital data,such as digital outcrop model(DOM).The workflow proposed for the parametrization of the discontinuities consists of the following steps:(1)Analysis and mapping of the fractures detected within the 3D DOMs;(2)Calculation of the orientation,position and dimensions of discontinuities that are represented by best-fit circular planes;(3)Determining the discontinuity parameters(dimension,distribution,spacing and intensity)by the DICE algorithm using different 3D oriented sampling techniques(3D oriented scanline,3D oriented circular scan window and spherical scan volume).Different sampling methods were bench tested with a synthetic,as well as a natural case study,and compared in order to understand the advantages and limitations of each technique.The 3D oriented circular scan window appears to be the most effective method for fracture intensity estimation with high accuracy(error 0.4%)and stability with variations in scan radius.
基金The authors gratefully acknowledge the financial support received from the Strategic Cooperation Technology Projects of CNPC and CUPB(No.ZLZX2020-01)the National Key Scientific Research Instrument Research Project of NSFC(No.51827804).
文摘Radial borehole fracturing that combines radial boreholes with hydraulic fracturing is anticipated to improve the output of tight oil and gas reservoirs.This paper aims to investigate fracture propagation and pressure characteristics of radial borehole fracturing in multiple layers.A series of laboratory experiments with artificial rock samples(395 mm×395 mm×395 mm)was conducted using a true triaxial fracturing device.Three crucial factors corresponding to the vertical distance of adjacent radial borehole layers(vertical distance),the azimuth and diameter of the radial borehole are examined.Experimental results show that radial borehole fracturing in multiple layers generates diverse fracture geometries.Four types of fractures are identified based on the connectivity between hydraulic fractures and radial boreholes.The vertical distance significantly influences fracture propagation perpendicular to the radial borehole axis.An increase in the vertical distance impedes fracture connection across multiple radial borehole layers and reduces the fracture propagation distance along the radial borehole axis.The azimuth also influences fracture propagation along the radial borehole axis.Increasing the azimuth reduces the guiding ability of radial boreholes,which makes the fracture quickly curve to the maximum horizontal stress direction.The breakdown pressure correlates with diverse fracture geometries observed.When the fractures connect multi-layer radial boreholes,increasing the vertical distance decreases the breakdown pressure.Decreasing the azimuth and increasing the diameter also decrease the breakdown pressure.The extrusion force exists between the adjacent fractures generated in radial boreholes in multiple rows,which plays a crucial role in enhancing the guiding ability of radial boreholes and results in higher breakdown pressure.The research provides valuable theoretical insights for the field application of radial borehole fracturing technology in tight oil and gas reservoirs.
基金The authors gratefully acknowledge the support of the National Natural Science Foundation of China(Grant Nos.52174036,51774243,51904257,51874251)the Sichuan Province Science and Technology Program(Grant Nos.2021YJ0345,2022JDJQ0009,2022NSFSC0186).
文摘Shale gas is an important component of unconventional oil and gas resources.Studying the imbibition behavior is helpful to optimize flowback parameters and enhance gas recovery.Recent imbibition studies have focused on shale matrix,and the pressure conditions discussed were mostly atmospheric.The initial imbibition behavior begins from propped fractures to matrix,but there are few studies working on explaining the imbibition behavior in propped fractures or the phenomenon of many shale wells exhibit higher productivity after a“soaking”period.Therefore,propped fracture samples were designed for imbibition and migration experiments.In order to accurately study the mechanism and main influencing factors of fracturing fluid imbibition and migration in propped and unpropped shale fractures under high temperature and high pressure,a series of experiments based on nuclear magnetic resonance(NMR)were carried out.Results showed that NMR T2 spectra of all samples exhibited a bimodal distribution.The final imbibition volume of fracturing fluid was positively related to pressure and fracture width.The imbibition effect of fracturing fluid was more evident in matrix pores under high pressure.In the migration during soaking stage,the fracturing fluid gradually migrated from large pores to small pores and gradually displaced the shale gas from the matrix,thus allowing the water blocking in propped fractures to self-unlock to some extent.Gas permeability decreased in the imbibition stage,while it recovered in the migration stage to some extent.
基金This work is supported by the National Natural Science Foundation of China(No.52104049)the Young Elite Scientist Sponsorship Program by Beijing Association for Science and Technology(No.BYESS2023262)Science Foundation of China University of Petroleum,Beijing(No.2462022BJRC004).
文摘Polymer flooding in fractured wells has been extensively applied in oilfields to enhance oil recovery.In contrast to water,polymer solution exhibits non-Newtonian and nonlinear behavior such as effects of shear thinning and shear thickening,polymer convection,diffusion,adsorption retention,inaccessible pore volume and reduced effective permeability.Meanwhile,the flux density and fracture conductivity along the hydraulic fracture are generally non-uniform due to the effects of pressure distribution,formation damage,and proppant breakage.In this paper,we present an oil-water two-phase flow model that captures these complex non-Newtonian and nonlinear behavior,and non-uniform fracture characteristics in fractured polymer flooding.The hydraulic fracture is firstly divided into two parts:high-conductivity fracture near the wellbore and low-conductivity fracture in the far-wellbore section.A hybrid grid system,including perpendicular bisection(PEBI)and Cartesian grid,is applied to discrete the partial differential flow equations,and the local grid refinement method is applied in the near-wellbore region to accurately calculate the pressure distribution and shear rate of polymer solution.The combination of polymer behavior characterizations and numerical flow simulations are applied,resulting in the calculation for the distribution of water saturation,polymer concentration and reservoir pressure.Compared with the polymer flooding well with uniform fracture conductivity,this non-uniform fracture conductivity model exhibits the larger pressure difference,and the shorter bilinear flow period due to the decrease of fracture flow ability in the far-wellbore section.The field case of the fall-off test demonstrates that the proposed method characterizes fracture characteristics more accurately,and yields fracture half-lengths that better match engineering reality,enabling a quantitative segmented characterization of the near-wellbore section with high fracture conductivity and the far-wellbore section with low fracture conductivity.The novelty of this paper is the analysis of pressure performances caused by the fracture dynamics and polymer rheology,as well as an analysis method that derives formation and fracture parameters based on the pressure and its derivative curves.
基金supported by the National Natural Science Foundation of China(Nos.42077243,52209148,and 52079062).
文摘With an extension of the geological entropy concept in porous media,the approach called directional entrogram is applied to link hydraulic behavior to the anisotropy of the 3D fracture networks.A metric called directional entropic scale is used to measure the anisotropy of spatial order in different directions.Compared with the traditional connectivity indexes based on the statistics of fracture geometry,the directional entropic scale is capable to quantify the anisotropy of connectivity and hydraulic conductivity in heterogeneous 3D fracture networks.According to the numerical analysis of directional entrogram and fluid flow in a number of the 3D fracture networks,the hydraulic conductivities and entropic scales in different directions both increase with spatial order(i.e.,trace length decreasing and spacing increasing)and are independent of the dip angle.As a result,the nonlinear correlation between the hydraulic conductivities and entropic scales from different directions can be unified as quadratic polynomial function,which can shed light on the anisotropic effect of spatial order and global entropy on the heterogeneous hydraulic behaviors.
基金This work was supported by the National Nature Science Foundation of China(Grant Nos.42177139 and 41941017)the Natural Science Foundation Project of Jilin Province,China(Grant No.20230101088JC).The authors would like to thank the anonymous reviewers for their comments and suggestions.
文摘The aperture of natural rock fractures significantly affects the deformation and strength properties of rock masses,as well as the hydrodynamic properties of fractured rock masses.The conventional measurement methods are inadequate for collecting data on high-steep rock slopes in complex mountainous regions.This study establishes a high-resolution three-dimensional model of a rock slope using unmanned aerial vehicle(UAV)multi-angle nap-of-the-object photogrammetry to obtain edge feature points of fractures.Fracture opening morphology is characterized using coordinate projection and transformation.Fracture central axis is determined using vertical measuring lines,allowing for the interpretation of aperture of adaptive fracture shape.The feasibility and reliability of the new method are verified at a construction site of a railway in southeast Tibet,China.The study shows that the fracture aperture has a significant interval effect and size effect.The optimal sampling length for fractures is approximately 0.5e1 m,and the optimal aperture interpretation results can be achieved when the measuring line spacing is 1%of the sampling length.Tensile fractures in the study area generally have larger apertures than shear fractures,and their tendency to increase with slope height is also greater than that of shear fractures.The aperture of tensile fractures is generally positively correlated with their trace length,while the correlation between the aperture of shear fractures and their trace length appears to be weak.Fractures of different orientations exhibit certain differences in their distribution of aperture,but generally follow the forms of normal,log-normal,and gamma distributions.This study provides essential data support for rock and slope stability evaluation,which is of significant practical importance.
基金supported by the National Natural Science Foundation of China(Nos.52225402 and U1910206).
文摘Heat transfer and temperature evolution in overburden fracture and ground fissures are one of the essential topics for the identification of ground fissures via unmanned aerial vehicle(UAV) infrared imager. In this study, discrete element software UDEC was employed to investigate the overburden fracture field under different mining conditions. Multiphysics software COMSOL were employed to investigate heat transfer and temperature evolution of overburden fracture and ground fissures under the influence of mining condition, fissure depth, fissure width, and month alternation. The UAV infrared field measurements also provided a calibration for numerical simulation. The results showed that for ground fissures connected to underground goaf(Fissure Ⅰ), the temperature difference increased with larger mining height and shallow buried depth. In addition, Fissure Ⅰ located in the boundary of the goaf have a greater temperature difference and is easier to be identified than fissures located above the mining goaf. For ground fissures having no connection to underground goaf(Fissure Ⅱ), the heat transfer is affected by the internal resistance of the overlying strata fracture when the depth of Fissure Ⅱ is greater than10 m, the temperature of Fissure Ⅱ gradually equals to the ground temperature as the fissures’ depth increases, and the fissures are difficult to be identified. The identification effect is most obvious for fissures larger than 16 cm under the same depth. In spring and summer, UAV infrared identification of mining fissures should be carried out during nighttime. This study provides the basis for the optimal time and season for the UAV infrared identification of different types of mining ground fissures.
基金The authors gratefully acknowledge the financial support from the National Natural Science Foundation of China(Grant No.52274009)China Postdoctoral Science Foundation(Grant No.2022M723501)Science and Technology Planning Project of Sichuan Province(Grant No.2021YJ0359).
文摘Lost circulation is a common downhole problem of drilling in geothermal and high-temperature,high-pressure(HTHP)formations.Lost circulation material(LCM)is a regular preventive and remedial measure for lost circulation.However,conventional LCMs seem ineffective in high-temperature formations.This may be due to the changes in the mechanical properties of LCMs and their sealing performance under high-temperature conditions.To understand how high temperature affects the fracture sealing performance of LCMs,we developed a coupled computational fluid dynamics-discrete element method(CFD-DEM)model to simulate the behavior of granular LCMs in fractures.We summarized the literature on the effects of high temperature on the mechanical properties of LCMs and the rheological properties of drilling fluid.We conducted sensitivity analyses to investigate how changing LCM slurry properties affected the fracture sealing efficiency at increasing temperatures.The results show that high temperature reduces the size,strength,and friction coefficient of LCMs as well as the drilling fluid viscosity.Smaller,softer,and less frictional LCM particles have lower bridging probability and slower bridging initiation.Smaller particles tend to form dual-particle bridges rather than single-particle bridges.These result in a deeper,tighter,but unstable sealing zone.Reduced drilling fluid viscosity leads to faster and shallower sealing zones.
基金supported by the National Natural Science Foundation of China(Nos.12302264,52104004,12072170,and 12202225)the Natural Science Foundation of Shandong Province(No.ZR2021QA042)Special Fund for Taishan Scholar Project(No.Tsqn202211180).
文摘The surrounding rock of roadways exhibits intricate characteristics of discontinuity and heterogeneity.To address these complexities,this study employs non-local Peridynamics(PD)theory and reconstructs the kernel function to represent accurately the spatial decline of long-range force.Additionally,modifications to the traditional bondbased PD model are made.By considering the micro-structure of coal-rock materials within a uniform discrete model,heterogeneity characterized by bond random pre-breaking is introduced.This approach facilitates the proposal of a novel model capable of handling the random distribution characteristics of material heterogeneity,rendering the PD model suitable for analyzing the deformation and failure of heterogeneous layered coal-rock mass structures.The established numerical model and simulation method,termed the sub-homogeneous PD model,not only incorporates the support effect but also captures accurately the random heterogeneous micro-structure of roadway surrounding rock.The simulation results obtained using this model show good agreement with field measurements from the Fucun coal mine,effectively validating the model’s capability in accurately reproducing the deformation and failure mode of surrounding rock under bolt-supported(anchor cable).The proposed subhomogeneous PD model presents a valuable and effective simulation tool for studying the deformation and failure of roadway surrounding rock in coal mines,offering new insights and potential advancements.
基金supported by the National Natural Science Foundation of China(Grant Nos.52204104 and U19A2098)the Science and Technology Department of Sichuan Province,China(Grant No.2023YFH0022).
文摘For expedited transportation,vehicular tunnels are often designed as two adjacent tunnels,which frequently experience dynamic stress waves from various orientations during blasting excavation.To analyze the impact of dynamic loading orientation on the stability of the twin-tunnel,a split Hopkinson pressure bar(SHPB)apparatus was used to conduct a dynamic test on the twin-tunnel specimens.The two tunnels were rotated around the specimen’s center to consider the effect of dynamic loading orientation.LS-DYNA software was used for numerical simulation to reveal the failure properties and stress wave propagation law of the twin-tunnel specimens.The findings indicate that,for a twin-tunnel exposed to a dynamic load from different orientations,the crack initiation position appears most often at the tunnel corner,tunnel spandrel,and tunnel floor.As the impact direction is created by a certain angle(30°,45°,60°,120°,135°,and 150°),the fractures are produced in the middle of the line between the left tunnel corner and the right tunnel spandrel.As the impact loading angle(a)is 90°,the tunnel sustains minimal damage,and only tensile fractures form in the surrounding rocks.The orientation of the impact load could change the stress distribution in the twin-tunnel,and major fractures are more likely to form in areas where the tensile stress is concentrated.
基金We acknowledge the funding support from the National Natural Science Foundation of China(Grant No.42271148).
文摘Due to the presence of ice and unfrozen water in pores of frozen rock,the rock fracture behaviors are susceptible to temperature.In this study,the potential thawing-induced softening effects on the fracture behaviors of frozen rock is evaluated by testing the tension fracture toughness(KIC)of frozen rock at different temperatures(i.e.-20℃,-15℃,-12℃,-10℃,-8℃,-6℃,-4℃,-2℃,and 0℃).Acoustic emission(AE)and digital image correlation(DIC)methods are utilized to analyze the microcrack propagation during fracturing.The melting of pore ice is measured using nuclear magnetic resonance(NMR)method.The results indicate that:(1)The KIC of frozen rock decreases moderately between-20℃ and-4℃,and rapidly between-4℃ and 0℃.(2)At-20℃ to-4℃,the fracturing process,deduced from the DIC results at the notch tip,exhibits three stages:elastic deformation,microcrack propagation and microcrack coalescence.However,at-4℃e0℃,only the latter two stages are observed.(3)At-4℃e0℃,the AE activities during fracturing are less than that at-20℃ to-4℃,while more small events are reported.(4)The NMR results demonstrate a reverse variation trend in pore ice content with increasing temperature,that is,a moderate decrease is followed by a sharp decrease and-4℃ is exactly the critical temperature.Next,we interpret the thawing-induced softening effect by linking the evolution in microscopic structure of frozen rock with its macroscopic fracture behaviors as follow:from-20℃ to-4℃,the thickening of the unfrozen water film diminishes the cementation strength between ice and rock skeleton,leading to the decrease in fracture parameters.From-4℃ to 0℃,the cementation effect of ice almost vanishes,and the filling effect of pore ice is reduced significantly,which facilitates microcrack propagation and thus the easier fracture of frozen rocks.
基金This work was supported by the Guangdong Basic and Applied Basic Research Foundation(Grant No.2021A1515110304)the Na-tional Natural Science Foundation of China(Grant Nos.42077246 and 52278412).
文摘Grouting is a widely used approach to reinforce broken surrounding rock mass during the construction of underground tunnels in fault fracture zones,and its reinforcement effectiveness is highly affected by geostress.In this study,a numerical manifold method(NMM)based simulator has been developed to examine the impact of geostress conditions on grouting reinforcement during tunnel excavation.To develop this simulator,a detection technique for identifying slurry migration channels and an improved fluid-solid coupling(FeS)framework,which considers the influence of fracture properties and geostress states,is developed and incorporated into a zero-thickness cohesive element(ZE)based NMM(Co-NMM)for simulating tunnel excavation.Additionally,to simulate coagulation of injected slurry,a bonding repair algorithm is further proposed based on the ZE model.To verify the accuracy of the proposed simulator,a series of simulations about slurry migration in single fractures and fracture networks are numerically reproduced,and the results align well with analytical and laboratory test results.Furthermore,these numerical results show that neglecting the influence of geostress condition can lead to a serious over-estimation of slurry migration range and reinforcement effectiveness.After validations,a series of simulations about tunnel grouting reinforcement and tunnel excavation in fault fracture zones with varying fracture densities under different geostress conditions are conducted.Based on these simula-tions,the influence of geostress conditions and the optimization of grouting schemes are discussed.
基金the National Natural Science Foundation of China(Qing Zhang,Nos.11932006,U1934206,12172121)the Fundamental Research Funds for the Central Universities(Xin Gu,No.B210201031).
文摘Accurate simulation of the cracking process caused by rust expansion of reinforced concrete(RC)structures plays an intuitive role in revealing the corrosion-induced failure mechanism.Considering the quasi-brittle fracture of concrete,the fracture phase field driven by the compressive-shear term is constructed and added to the traditional brittle fracture phase field model.The rationality of the proposed model is verified by a mixed fracture example under a shear displacement load.Then,the extended fracture phase model is applied to simulate the corrosion-induced cracking process of RC.The cracking patterns caused by non-uniform corrosion expansion are discussed for RC specimens with homogeneous macroscopically or heterogeneous with different polygonal aggregate distributions at the mesoscopic scale.Then,the effects of the protective layer on the crack propagation trajectory and cracking resistance are investigated,illustrating that the cracking angle and cracking resistance increase with the increase of the protective layer thickness,consistent with the experimental observation.Finally,the corrosion-induced cracking process of concrete specimens with large and small spacing rebars is simulated,and the interaction of multiple corrosion cracking is easily influenced by the reinforcement spacing,which increases with the decrease of the steel bar interval.These conclusions play an important role in the design of engineering anti-corrosion measures.The fracture phase field model can provide strong support for the life assessment of RC structures.
基金Supported by the Jiangxi Provincial Natural Science Foundation(No.20232ACB206030)。
文摘●AIM:To explore the combined application of surgical navigation nasal endoscopy(NNE)and three-dimensional printing technology(3DPT)for the adjunctive treatment of orbital blowout fractures(OBF).●METHODS:Retrospective analysis was conducted on the data of patients with OBF who underwent surgical treatment at the Affiliated Eye Hospital of Nanchang University between July 2012 and November 2022.The control group consisted of patients who received traditional surgical treatment(n=43),while the new surgical group(n=52)consisted of patients who received NNE with 3DPT.The difference in therapeutic effects between the two groups was evaluated by comparing the duration of the operation,best corrected visual acuity(BCVA),enophthalmos difference,recovery rate of eye movement disorder,recovery rate of diplopia,and incidence of postoperative complications.●RESULTS:The study included 95 cases(95 eyes),with 63 men and 32 women.The patients’age ranged from 5 to 67y(35.21±15.75y).The new surgical group and the control group exhibited no statistically significant differences in the duration of the operation,BCVA and enophthalmos difference.The recovery rates of diplopia in the new surgical group were significantly higher than those in the control group at 1mo[OR=0.03,95%CI(0.01–0.15),P<0.0000]and 3mo[OR=0.11,95%CI(0.03–0.36),P<0.0000]postoperation.Additionally,the recovery rates of eye movement disorders at 1 and 3mo after surgery were OR=0.08,95%CI(0.03–0.24),P<0.0000;and OR=0.01,95%CI(0.00–0.18),P<0.0000.The incidence of postoperative complications was lower in the new surgical group compared to the control group[OR=4.86,95%CI(0.95–24.78),P<0.05].●CONCLUSION:The combination of NNE and 3DPT can shorten the recovery time of diplopia and eye movement disorder in patients with OBF.
基金supported by the National Natural Science Foundation of China(No.42307258)the technological research projects in Sichuan Province(No.2022YFSY0007)the China Atomic Energy Authority(CAEA)through the Geological Disposal Program.
文摘Stability analysis of underground constructions requires a model study of rock masses’ long-term performance. Creep tests under different stress conditions was conducted on intact granite and granite samples fractured at 30° and 45° angles. The experimental results indicate that the steady creep strain rates of intact and fractured rock present an exponential increase trend with the increase of stress level. A nonlinear creep model is developed based on the experimental results, in which the initial damage caused by fracture together with the damage caused by constant load have been taken into consideration. The fitting analysis results indicated that the model proposed is more accurate at identifying the full creep regions in fractured granite, especially the accelerated stage of creep deformation. The least-square fit error of the proposed creep model is significantly lower than that of Nishihara model by almost an order of magnitude. An analysis of the effects of elastic modulus, viscosity coefficient, and damage factors on fractured rock strain rate and creep strain is conducted. If no consideration is given to the effects of the damage, the proposed nonlinear creep model can degenerate into to the classical Nishihara model.
基金“Research and Application of Key Techniques for Drilling and Completion of Bozhong 19-6 Condensate Gas Field Development-Phase I”sub topic 4“Research on Leakage Prevention and Plugging Techniques for Fault and Buried Hill Reservoirs”,a Project of China National Offshore Oil (China)Co.,Ltd. (Project No.YXKY-2020-TJ-03).
文摘Fault fractures usually have large openings and considerable extension. Accordingly, cross-linked gel materials aregenerally considered more suitable plugging agents than water-based gels because the latter often undergo contaminationvia formation water, which prevents them from being effective over long times. Hence, in this study, aset of oil-based composite gels based on waste grease and epoxy resin has been developed. These materials havebeen observed to possess high compressive strength and resistance to the aforementioned contamination, therebyleading to notable increase in plugging success rate. The compressive strength, thickening time, and resistance toformation water pollution of these gels have been evaluated indoors. The results show that the compressivestrength of the gel can reach 11 MPa;additionally, the related gelation time can be controlled to be more than3 h, thereby providing a safe construction time;Invasion of formation water has a small effect on the gel strengthand does not shorten the thickening time. All considered performance indicators of the oil-based gel confirm itssuitability as a plugging agent for fault fractures.
