Optical bistability(OB)is capable of rapidly and reversibly transforming a parameter of an optical signal from one state to another,and homologous nonlinear optical bistable devices are core components of high-speed a...Optical bistability(OB)is capable of rapidly and reversibly transforming a parameter of an optical signal from one state to another,and homologous nonlinear optical bistable devices are core components of high-speed all-optical communication and all-optical networks.In this paper,we theoretically investigated the controllable OB from a Fabry-Pérot(FP)cavity with a nonlinear three-dimensional Dirac semimetal(3D DSM)in the terahertz band.The OB stems from the third-order nonlinear bulk conductivity of the 3D DSM and the resonance mode has a positive effect on the generation of OB.This FP cavity structure is able to tune the OB because the transmittance and the reflectance can be modulated by the Fermi energy of the 3D DSM.We believe that this FP cavity configuration could provide a reference concept for realizing tunable bistable devices.展开更多
In this paper, we observe experimentally the optical bistability induced by the side-mode injection power and wave- length detuning in a single mode Fabry-P6rot laser diode （SMFP-LD）. Results show that the bistabili...In this paper, we observe experimentally the optical bistability induced by the side-mode injection power and wave- length detuning in a single mode Fabry-P6rot laser diode （SMFP-LD）. Results show that the bistability characteristics of the dominant and injected modes are strongly dependent on the injected input optical power and wavelength detuning in an SMFP-LD. We observe three types of hysteresis loops： counterclockwise, clockwise, and butterfly hysteresis with various loop widths. In the case of a bistability loop caused by injection power, the transition from counterclockwise to clockwise in the hysteresis direction with the wavelength detuning from 0.028 nm to 0.112 nm is observed in a way of butterfly hys- teresis for the dominant mode by increasing the wavelength detuning. The width of hysteresis loop, induced by wavelength detuning is also changed while the injection power is enhanced from -7 dBm to -5 dBm.展开更多
Since the first observation of parity-time（PT） symmetry in optics, varied interesting phenomena have been discovered in both theories and experiments, such as PT phase transition and unidirectional invisibility, whi...Since the first observation of parity-time（PT） symmetry in optics, varied interesting phenomena have been discovered in both theories and experiments, such as PT phase transition and unidirectional invisibility, which turns PT-symmetric optics into a hotspot in research. Here, we report on the one-way localized Fabry-Pérot（FP） resonance, where a welldesigned PT optical resonator may operate at exceptional points with bidirectional transparency but unidirectional field localization. Overtones of such one-way localized FP resonance can be classified into a blue shifted branch and a red shifted branch. Therefore, the fundamental resonant frequency is not the lowest one. We find that the spatial field distributions of the overtones at the same absolute order are almost the same, even though their frequencies are quite different.展开更多
High-resolution multi-color printing relies upon pixelated optical nanostructures,which is crucial to promote color display by producing nonbleaching colors,yet requires simplicity in fabrication and dynamic switching...High-resolution multi-color printing relies upon pixelated optical nanostructures,which is crucial to promote color display by producing nonbleaching colors,yet requires simplicity in fabrication and dynamic switching.Antimony trisulfide(Sb_(2)S_(3))is a newly rising chalcogenide material that possesses prompt and significant transition of its optical characteristics in the visible region between amorphous and crystalline phases,which holds the key to color-varying devices.Herein,we proposed a dynamically switchable color printing method using Sb_(2)S_(3)-based stepwise pixelated Fabry-Pérot(FP)cavities with various cavity lengths.The device was fabricated by employing a direct laser patterning that is a less timeconsuming,more approachable,and low-cost technique.As switching the state of Sb_(2)S_(3) between amorphous and crystalline,the multi-color of stepwise pixelated FP cavities can be actively changed.The color variation is due to the profound change in the refractive index of Sb_(2)S_(3) over the visible spectrum during its phase transition.Moreover,we directly fabricated sub-50 nm nano-grating on ultrathin Sb_(2)S_(3) laminate via microsphere 800-nm femtosecond laser irradiation in far field.The minimum feature size can be further decreased down to~45 nm(λ/17)by varying the thickness of Sb_(2)S_(3) film.Ultrafast switchable Sb_(2)S_(3) photonic devices can take one step toward the next generation of inkless erasable papers or displays and enable information encryption,camouflaging surfaces,anticounterfeiting,etc.Importantly,our work explores the prospects of rapid and rewritable fabrication of periodic structures with nano-scale resolution and can serve as a guideline for further development of chalcogenide-based photonics components.展开更多
This paper proposes a Mach Zehnder/Fabry Perot Interferometer(MZI/FPI)fiber sensor based on Single-mode Fiber(SMF)and Hollow-core Fiber(HCF),which has high sensitivity to temperature and lateral loads.The proposed dev...This paper proposes a Mach Zehnder/Fabry Perot Interferometer(MZI/FPI)fiber sensor based on Single-mode Fiber(SMF)and Hollow-core Fiber(HCF),which has high sensitivity to temperature and lateral loads.The proposed device consists of two single-mode fiber cones formed by manually controlling the fusion splicer and an air cavity formed by fusing a section of hollow-core fiber.The structure of the sensor is a double cone cascaded air cavity.At the beginning of the design,we compared the basic transmission spectra of single cone structure and double cone structure experimentally,and therefore chose to use double cone structure and air cavity cascade.Light undergoes its first reflection at the first interface between the single-mode fiber and the air cavity structure,and its second reflection at the second interface between the air cavity structure and the single-mode fiber.The two reflected light waves produced by the two reflections form FP interference,which can be used to measure lateral loads.The transmitted light is excited through the first cone,and a portion of the core mode light is excited to the cladding,while another portion of the core mode light continues to propagate in the core.The light couples at the second cone,and the cladding mode light couples back into the core,forming MZ interference with the core mode light,which can be used to measure temperature.The use of hollow-core fiber to form an air cavity has little effect on transmitted light,while avoiding the problem of crosstalk in dual parameter measurements.By designing temperature and lateral load experiments,this article verifies the sensitivity characteristics of this sensor to temperature and lateral loads.A significant redshift phenomenon was observed in the temperature experiment.A significant redshift phenomenon also occurred in the lateral load experiment.Through wavelength demodulation,the experimental results show that the wavelength sensitivity of the sensor to temperature is 56.29 pm/℃in the range of 30℃to 80℃.The wavelength sensitivity of the sensor to lateral loads is 1.123 nm/N in the range of 0~5 N.In addition,we have prepared multiple sets of fiber optic sensors with this structure and conducted repeated experiments to verify that the sensing performance of this structure of fiber optic sensors for temperature and lateral load is relatively stable.Also,the different waist diameters of cones will have a certain impact on the transmission spectrum of MZ,while the length of the air cavity will also have a certain impact on the reflection spectrum of FP.This article lists some fiber optic sensors for dual parameter measurement of temperature and lateral load.Compared with the listed sensors,the fiber optic sensor proposed in this article has better sensitivity to temperature and lateral load.And the fiber optic sensor proposed in this article has a simple manufacturing process,low production cost,and good performance,which has certain prospects in scientific research and industrial production.展开更多
Orbital angular momentum （OAM） mode division provides a promising solution to push past the already exhausted available degrees of freedom available in conventional optical communications. Nevertheless, the practic...Orbital angular momentum （OAM） mode division provides a promising solution to push past the already exhausted available degrees of freedom available in conventional optical communications. Nevertheless, the practical deploymentof OAM within a free-space optical （FSO） communications system is still hampered by a major challenge, namely that OAM-based FSO links are vulnerable to disturbances. Though several techniques, such as using various non-diffraction beams and multiple transmit–receive apertures, are proposed to alleviate the influence of disturbances, these techniquessignificantly reduce the performance with regard to combating single fading for spatial blockages of the laser beam byobstructions. In this work, we initially demonstrate that a Fabry-Pérot resonant cavity has the ability to implement OAM mode healing, even for a blocking percentage of over 50%. Consequently, the proposed method will expand the use ofOAM in the FSO secure communications and quantum encryption fields.展开更多
High-performance optical quantum memories serving as quantum nodes are crucial for the distribution of remote entanglement and the construction of large-scale quantum networks.Notably,quantum systems based on single e...High-performance optical quantum memories serving as quantum nodes are crucial for the distribution of remote entanglement and the construction of large-scale quantum networks.Notably,quantum systems based on single emitters can achieve deterministic spin–photon entanglement,which greatly simplifies the difficulty of constructing quantum network nodes.Among them,optically interfaced spins embedded in solid-state systems,as atomic-like emitters,are important candidate systems for implementing long-lived quantum memory due to their stable physical properties and robustness to decoherence in scalable and compact hardware.To enhance the strength of light-matter interactions,optical microcavities can be exploited as an important tool to generate high-quality spin–photon entanglement for scalable quantum networks.They can enhance the photon collection probability and photon generation rate of specific optical transitions and improve the coherence and spectral purity of emitted photons.For solid-state systems,open Fabry–Pérot cavities can couple single emitters that are not in proximity to the surface,avoiding significant spectral diffusion induced by the interfaces while maintaining the wide tunability,which enables addressing of multiple single emitters in the frequency and spatial domain within a single device.This review described the characteristics of single emitters as quantum memories with a comparison to atomic ensembles,the cavity-enhancement effect for single emitters and the advantages of different cavities,especially fiber Fabry–Pérot microcavities.Finally,recent experimental progress on solid-state single emitters coupled with fiber Fabry–Pérot microcavities was also reviewed,with a focus on color centers in diamond and silicon carbide,as well as rare-earth dopants.展开更多
A laser frequency comb with several tens GHz level is demonstrated,based on a Yb-doped femtosecond fiber laser and two low-finesse Fabry-Perot cavities（FPCs） in series.The original 250-MHz mode-line-spacing of the s...A laser frequency comb with several tens GHz level is demonstrated,based on a Yb-doped femtosecond fiber laser and two low-finesse Fabry-Perot cavities（FPCs） in series.The original 250-MHz mode-line-spacing of the source comb is filtered to 4.75 GHz and 23.75 GHz,respectively.According to the multi-beam interferences theory of FPC,the side-mode suppression rate of FPC schemes is in good agreement with our own theoretical results from 27 dB of a single FPC to43 dB of paired FPCs.To maintain long-term stable operation and determine the absolute frequency mode number in the23.75-GHz comb,the Pound-Drever-Hall（PDH） locking technology is utilized.Such stable tens GHz frequency combs have important applications in calibrating astronomical spectrographs with high resolution.展开更多
The last half-century was transformed by the electronic revolution that essentially reproduced the human brain and its computing capacity on a chip. But over time, scientists have realized that something was missing t...The last half-century was transformed by the electronic revolution that essentially reproduced the human brain and its computing capacity on a chip. But over time, scientists have realized that something was missing to give life, so to speak, to the small chip with a brain： One needed to awaken its senses and develop its muscles! This challenge was solved through MEMS （micro electro mechanical systems）. Indeed, MEMS today are equipped with the sense of sight, smell, hearing, taste and touch through microsensors. They are also capable of physical exertion through small muscles called microactuators. These new capabilities open wide fields of imagination and important specific applications.展开更多
基金Project supported by the Wenzhou Major Science and Technology Innovation Project:Research and Industrialization of Key Technologies for Intelligent Dynamic Ultrahigh Pressure Microfluidizer(Grant No.ZG2023012)Wenzhou Major Science and Technology Innovation PR Project(Grant No.ZG2022011)+3 种基金the National Natural Science Foundation of China(Grant No.62305254)the Scientific Research Fund of the Natural Science Foundation of Hunan Province(Grant No.2022JJ30394)the Changsha Natural Science Foundation(Grant Nos.kq2202236 and kq2202246)the Science and Technology Project of Jiangxi Provincial Education Department(Grant No.GJJ190911).
文摘Optical bistability(OB)is capable of rapidly and reversibly transforming a parameter of an optical signal from one state to another,and homologous nonlinear optical bistable devices are core components of high-speed all-optical communication and all-optical networks.In this paper,we theoretically investigated the controllable OB from a Fabry-Pérot(FP)cavity with a nonlinear three-dimensional Dirac semimetal(3D DSM)in the terahertz band.The OB stems from the third-order nonlinear bulk conductivity of the 3D DSM and the resonance mode has a positive effect on the generation of OB.This FP cavity structure is able to tune the OB because the transmittance and the reflectance can be modulated by the Fermi energy of the 3D DSM.We believe that this FP cavity configuration could provide a reference concept for realizing tunable bistable devices.
基金supported by the National Natural Science Foundation of China(Grant No.61205111)the Open Foundation of State Key Laboratory of Millimeter Waves,China(Grant No.K201219)the Natural Science Foundation of Chongqing Normal University,China(Grant No.2011XLZ06)
文摘In this paper, we observe experimentally the optical bistability induced by the side-mode injection power and wave- length detuning in a single mode Fabry-P6rot laser diode （SMFP-LD）. Results show that the bistability characteristics of the dominant and injected modes are strongly dependent on the injected input optical power and wavelength detuning in an SMFP-LD. We observe three types of hysteresis loops： counterclockwise, clockwise, and butterfly hysteresis with various loop widths. In the case of a bistability loop caused by injection power, the transition from counterclockwise to clockwise in the hysteresis direction with the wavelength detuning from 0.028 nm to 0.112 nm is observed in a way of butterfly hys- teresis for the dominant mode by increasing the wavelength detuning. The width of hysteresis loop, induced by wavelength detuning is also changed while the injection power is enhanced from -7 dBm to -5 dBm.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11674119,11404125,and 11574389)the financial support from the Bird Nest Plan of HUST,Chinasupported by One Hundred-Talent Plan of Chinese Academy of Sciences
文摘Since the first observation of parity-time（PT） symmetry in optics, varied interesting phenomena have been discovered in both theories and experiments, such as PT phase transition and unidirectional invisibility, which turns PT-symmetric optics into a hotspot in research. Here, we report on the one-way localized Fabry-Pérot（FP） resonance, where a welldesigned PT optical resonator may operate at exceptional points with bidirectional transparency but unidirectional field localization. Overtones of such one-way localized FP resonance can be classified into a blue shifted branch and a red shifted branch. Therefore, the fundamental resonant frequency is not the lowest one. We find that the spatial field distributions of the overtones at the same absolute order are almost the same, even though their frequencies are quite different.
基金support from the National Key Research and Development Program of China (2020YFA0714504,2019YFA0709100).
文摘High-resolution multi-color printing relies upon pixelated optical nanostructures,which is crucial to promote color display by producing nonbleaching colors,yet requires simplicity in fabrication and dynamic switching.Antimony trisulfide(Sb_(2)S_(3))is a newly rising chalcogenide material that possesses prompt and significant transition of its optical characteristics in the visible region between amorphous and crystalline phases,which holds the key to color-varying devices.Herein,we proposed a dynamically switchable color printing method using Sb_(2)S_(3)-based stepwise pixelated Fabry-Pérot(FP)cavities with various cavity lengths.The device was fabricated by employing a direct laser patterning that is a less timeconsuming,more approachable,and low-cost technique.As switching the state of Sb_(2)S_(3) between amorphous and crystalline,the multi-color of stepwise pixelated FP cavities can be actively changed.The color variation is due to the profound change in the refractive index of Sb_(2)S_(3) over the visible spectrum during its phase transition.Moreover,we directly fabricated sub-50 nm nano-grating on ultrathin Sb_(2)S_(3) laminate via microsphere 800-nm femtosecond laser irradiation in far field.The minimum feature size can be further decreased down to~45 nm(λ/17)by varying the thickness of Sb_(2)S_(3) film.Ultrafast switchable Sb_(2)S_(3) photonic devices can take one step toward the next generation of inkless erasable papers or displays and enable information encryption,camouflaging surfaces,anticounterfeiting,etc.Importantly,our work explores the prospects of rapid and rewritable fabrication of periodic structures with nano-scale resolution and can serve as a guideline for further development of chalcogenide-based photonics components.
基金National Natural Science Foundation of China(Nos.6207509,U2001601,61975084)the Jiangsu Provincial Key Research and Development Program(Nos.BE2022079,BE2022055-2)。
文摘This paper proposes a Mach Zehnder/Fabry Perot Interferometer(MZI/FPI)fiber sensor based on Single-mode Fiber(SMF)and Hollow-core Fiber(HCF),which has high sensitivity to temperature and lateral loads.The proposed device consists of two single-mode fiber cones formed by manually controlling the fusion splicer and an air cavity formed by fusing a section of hollow-core fiber.The structure of the sensor is a double cone cascaded air cavity.At the beginning of the design,we compared the basic transmission spectra of single cone structure and double cone structure experimentally,and therefore chose to use double cone structure and air cavity cascade.Light undergoes its first reflection at the first interface between the single-mode fiber and the air cavity structure,and its second reflection at the second interface between the air cavity structure and the single-mode fiber.The two reflected light waves produced by the two reflections form FP interference,which can be used to measure lateral loads.The transmitted light is excited through the first cone,and a portion of the core mode light is excited to the cladding,while another portion of the core mode light continues to propagate in the core.The light couples at the second cone,and the cladding mode light couples back into the core,forming MZ interference with the core mode light,which can be used to measure temperature.The use of hollow-core fiber to form an air cavity has little effect on transmitted light,while avoiding the problem of crosstalk in dual parameter measurements.By designing temperature and lateral load experiments,this article verifies the sensitivity characteristics of this sensor to temperature and lateral loads.A significant redshift phenomenon was observed in the temperature experiment.A significant redshift phenomenon also occurred in the lateral load experiment.Through wavelength demodulation,the experimental results show that the wavelength sensitivity of the sensor to temperature is 56.29 pm/℃in the range of 30℃to 80℃.The wavelength sensitivity of the sensor to lateral loads is 1.123 nm/N in the range of 0~5 N.In addition,we have prepared multiple sets of fiber optic sensors with this structure and conducted repeated experiments to verify that the sensing performance of this structure of fiber optic sensors for temperature and lateral load is relatively stable.Also,the different waist diameters of cones will have a certain impact on the transmission spectrum of MZ,while the length of the air cavity will also have a certain impact on the reflection spectrum of FP.This article lists some fiber optic sensors for dual parameter measurement of temperature and lateral load.Compared with the listed sensors,the fiber optic sensor proposed in this article has better sensitivity to temperature and lateral load.And the fiber optic sensor proposed in this article has a simple manufacturing process,low production cost,and good performance,which has certain prospects in scientific research and industrial production.
基金This work is partially supported by the National Natural Science Foundation of China （11604219, 61675136, U701661, 61427819, 61138003, 61490712） the Leading talents of Guangdong province program （00201505）+1 种基金 the Natural Science Foundation of Guangdong Province （2016A030312010） Science and Technology Innovation Commission of Shenzhen （KQTD2015071016560101） and Shenzhen Peacock Program （KQTD2017033011044403, KQTD 2017033011044403）.
文摘Orbital angular momentum （OAM） mode division provides a promising solution to push past the already exhausted available degrees of freedom available in conventional optical communications. Nevertheless, the practical deploymentof OAM within a free-space optical （FSO） communications system is still hampered by a major challenge, namely that OAM-based FSO links are vulnerable to disturbances. Though several techniques, such as using various non-diffraction beams and multiple transmit–receive apertures, are proposed to alleviate the influence of disturbances, these techniquessignificantly reduce the performance with regard to combating single fading for spatial blockages of the laser beam byobstructions. In this work, we initially demonstrate that a Fabry-Pérot resonant cavity has the ability to implement OAM mode healing, even for a blocking percentage of over 50%. Consequently, the proposed method will expand the use ofOAM in the FSO secure communications and quantum encryption fields.
基金supported by the Innovation Program for Quantum Science and Technology(No.2021ZD0301200)the National Natural Science Foundation of China(Nos.12222411,11821404 and 12204459)Anhui Provincial Natural Science Foundation(No.2108085QA26).
文摘High-performance optical quantum memories serving as quantum nodes are crucial for the distribution of remote entanglement and the construction of large-scale quantum networks.Notably,quantum systems based on single emitters can achieve deterministic spin–photon entanglement,which greatly simplifies the difficulty of constructing quantum network nodes.Among them,optically interfaced spins embedded in solid-state systems,as atomic-like emitters,are important candidate systems for implementing long-lived quantum memory due to their stable physical properties and robustness to decoherence in scalable and compact hardware.To enhance the strength of light-matter interactions,optical microcavities can be exploited as an important tool to generate high-quality spin–photon entanglement for scalable quantum networks.They can enhance the photon collection probability and photon generation rate of specific optical transitions and improve the coherence and spectral purity of emitted photons.For solid-state systems,open Fabry–Pérot cavities can couple single emitters that are not in proximity to the surface,avoiding significant spectral diffusion induced by the interfaces while maintaining the wide tunability,which enables addressing of multiple single emitters in the frequency and spatial domain within a single device.This review described the characteristics of single emitters as quantum memories with a comparison to atomic ensembles,the cavity-enhancement effect for single emitters and the advantages of different cavities,especially fiber Fabry–Pérot microcavities.Finally,recent experimental progress on solid-state single emitters coupled with fiber Fabry–Pérot microcavities was also reviewed,with a focus on color centers in diamond and silicon carbide,as well as rare-earth dopants.
基金supported by the National Basic Research Program of China(Grant No.2012CB821304)the National Natural Science Foundation of China(Grant Nos.11078022 and 61378040)
文摘A laser frequency comb with several tens GHz level is demonstrated,based on a Yb-doped femtosecond fiber laser and two low-finesse Fabry-Perot cavities（FPCs） in series.The original 250-MHz mode-line-spacing of the source comb is filtered to 4.75 GHz and 23.75 GHz,respectively.According to the multi-beam interferences theory of FPC,the side-mode suppression rate of FPC schemes is in good agreement with our own theoretical results from 27 dB of a single FPC to43 dB of paired FPCs.To maintain long-term stable operation and determine the absolute frequency mode number in the23.75-GHz comb,the Pound-Drever-Hall（PDH） locking technology is utilized.Such stable tens GHz frequency combs have important applications in calibrating astronomical spectrographs with high resolution.
文摘The last half-century was transformed by the electronic revolution that essentially reproduced the human brain and its computing capacity on a chip. But over time, scientists have realized that something was missing to give life, so to speak, to the small chip with a brain： One needed to awaken its senses and develop its muscles! This challenge was solved through MEMS （micro electro mechanical systems）. Indeed, MEMS today are equipped with the sense of sight, smell, hearing, taste and touch through microsensors. They are also capable of physical exertion through small muscles called microactuators. These new capabilities open wide fields of imagination and important specific applications.
