Conformal cooling coils have been developed during the last decades through the use of additive manufacturing(AM)technologies.The main goal of this study was to analyze how the presence of an internal channel that cou...Conformal cooling coils have been developed during the last decades through the use of additive manufacturing(AM)technologies.The main goal of this study was to analyze how the presence of an internal channel that could act as a conformal cooling coil could affect compressive strength and quasi-elastic gradient of AlSi10Mg lattice structures produced by laser powder bed fusion(LPBF).Three different configurations of samples were tested in compression at 25℃ and 200℃.The reference structures were body centered cubic(BBC)in the core of the samples with vertical struts along Z(BCCZ)lattices in the outer perimeter,labelled as NC samples.The main novelty consisted in inserting a straight elliptical channel and a 45°elliptical channel inside the BCCZ lattice structures,labelled as SC and 45C samples respectively.All the samples were then tested in as-built(AB)condition,and after two post process heat treatments,commonly used for AlSi10Mg LPBF industrial components,a stress relieving(SR)and a T6 treatment.NC lattice structures AB exhibited an overall fragile fracture and therefore the SC and 45C configuration samples were tested only after thermal treatments.The test at 25℃ showed that all types of samples were characterized by negligible variations in their quasi-elastic gradients and yield strength.On the contrary,the general trend of stress-strain curves was influenced by the presence of the channel and its position.The test at 200℃ showed that NC,SC and 45C samples after SR and T6 treatments exhibited a metal-foam like deformation.展开更多
BACKGROUND Craniocerebral injuries encompass brain injuries,skull fractures,cranial soft tissue injuries,and similar injuries.Recently,the incidence of craniocerebral injuries has increased dramatically due to the inc...BACKGROUND Craniocerebral injuries encompass brain injuries,skull fractures,cranial soft tissue injuries,and similar injuries.Recently,the incidence of craniocerebral injuries has increased dramatically due to the increased numbers of traffic accidents and aerial work injuries,threatening the physical and mental health of patients.AIM To investigate the impact of failure modes and effects analysis(FMEA)-based emergency management on craniocerebral injury treatment effectiveness.METHODS Eighty-four patients with craniocerebral injuries,treated at our hospital from November 2019 to March 2021,were selected and assigned,using the random number table method,to study(n=42)and control(n=42)groups.Patients in the control group received conventional management while those in the study group received FMEA theory-based emergency management,based on the control group.Pre-and post-interventions,details regarding the emergency situation;levels of inflammatory stress indicators[Interleukin-6(IL-6),C-reactive protein(CRP),and procalcitonin(PCT)];incidence of complications;prognoses;and satisfaction regarding patient care were evaluated for both groups.RESULTS For the study group,the assessed parameters[pre-hospital emergency response time(9.13±2.37 min),time to receive a consultation(2.39±0.44 min),time needed to report imaging findings(1.15±4.44 min),and test reporting time(32.19±6.23 min)]were shorter than those for the control group(12.78±4.06 min,3.58±0.71 min,33.49±5.51 min,50.41±11.45 min,respectively;P<0.05).Pre-intervention serum levels of IL-6(78.71±27.59 pg/mL),CRP(19.80±6.77 mg/L),and PCT(3.66±1.82 ng/mL)in the study group patients were not significantly different from those in the control group patients(81.31±32.11 pg/mL,21.29±8.02 mg/L,and 3.95±2.11 ng/mL respectively;P>0.05);post-intervention serum indicator levels were lower in both groups than pre-intervention levels.Further,serum levels of IL-6(17.35±5.33 pg/mL),CRP(2.27±0.56 mg/L),and PCT(0.22±0.07 ng/mL)were lower in the study group than in the control group(30.15±12.38 pg/mL,3.13±0.77 mg/L,0.38±0.12 ng/mL,respectively;P<0.05).The complication rate observed in the study group(9.52%)was lower than that in the control group(26.19%,P<0.05).The prognoses for the study group patients were better than those for the control patients(P<0.05).Patient care satisfaction was higher in the study group(95.24%)than in the control group(78.57%,P<0.05).CONCLUSION FMEA-based craniocerebral injury management effectively shortens the time spent on emergency care,reduces inflammatory stress and complication risk levels,and helps improve patient prognoses,while achieving high patient care satisfaction levels.展开更多
It is not objective to rate the decision-making factors in the traditional failure mode and effect analysis,so fuzzy semantic theory is used in this paper.Six fuzzy semantic scales and their corresponding semantics ar...It is not objective to rate the decision-making factors in the traditional failure mode and effect analysis,so fuzzy semantic theory is used in this paper.Six fuzzy semantic scales and their corresponding semantics are summarized,and a defuzzification method is studied to obtain the fuzzy value table of the six fuzzy semantic scales.For the conflicts between experts in the traditional failure mode and effects analysis,a conflict-resolution algorithm is studied to obtain the failure risk order.Finally,a certain type of industrial valve is used as an example to prove the validity of the theory proposed in this paper.展开更多
In view of the low level testability of armored equipment,the important significance of armored equipment testability growth is discussed in this paper.The failure mode effects and criticality analysis( FMECA) method ...In view of the low level testability of armored equipment,the important significance of armored equipment testability growth is discussed in this paper.The failure mode effects and criticality analysis( FMECA) method to realize testability growth is introduced.Centering on the testability growth demands of new armored equipment,the deficiencies of traditional FMECA are analyzed.And an enhanced FMECA( EFMECA) method is proposed.The method increases the analysis contents,combines the information before the failure occurrence and impending failure modes together organically.Then the failure symptoms is analyzed,the failure modes and effects is determined,and the state development trend is predicted.Finally,the application of EFMECA method is illustrated by the example of the failure mode of typical armored equipment engine.展开更多
[Objectives]To investigate the effect of healthcare failure mode and effect analysis(HFMEA)on reducing error risk of neonatal parenteral nutrition solution dispensing.[Methods]A research team was established to identi...[Objectives]To investigate the effect of healthcare failure mode and effect analysis(HFMEA)on reducing error risk of neonatal parenteral nutrition solution dispensing.[Methods]A research team was established to identify the failure mode(FM)in each link of the formulation process of neonatal parenteral nutrition solution by HFMEA,quantify the severity(S),occurrence(O)and detection(D)of FM,and evaluate FM by risk priority number(RPN).For FM with the values of RPN>16,failure cause analysis was conducted,and corresponding improvement measures were formulated.The weight coefficient and random consistency ratio(CR)of deployment process were calculated in Matlab R2018a by compiling the Analytic Hierarchy Process(AHP)program.Six months after the implementation of improvement measures,the implementation effect was evaluated by comparing the changes of the values of RPN which was evaluated comprehensively and the rate of dispensing errors before and after the implementation of HFMEA.[Results]In the preparation process of neonatal parenteral nutrition solution,a total of 13 FMs with medium and above risk were found,the weight coefficient of medical order review,dosing and mixing was 0.2703,the weight coefficient of drug dispensing check and review was 0.1432,the weight coefficient of print label was 0.1015,the weight coefficient of distribution was 0.0716,and CR=0.0491<0.1.After six months of intervention,the total RPN value decreased by 64.81%from 127.8 to 45.0.The deployment error rates were significantly lower after the implementation,and the difference was statistically significant(P<0.05).[Conclusions]HFMEA can effectively reduce the error risk in preparation of neonatal parenteral nutrition solution,improve the quality of dispensing and promote the safety of neonatal medication.展开更多
The recognition and management of risk in donation process and blood product is critical to ensure donor and patient safety. To achieve this goal, the failure mode and effects analysis (FMEA) is a convenient method;mo...The recognition and management of risk in donation process and blood product is critical to ensure donor and patient safety. To achieve this goal, the failure mode and effects analysis (FMEA) is a convenient method;moreover it was used to prevent the occurrence of adverse events and look at what could go strong at each step. This study aimed to utilize FMEA in central blood bank in Khartoum to evaluate the potential risk and adverse event that may occur during the donation process. According to the severity, occurrence and the detection of each failure mode, the risk priority number (RPN) was calculated to determine which of the failures should take priority to find a solution and applying corrective action to reduce the failure risk. The statistical package for social sciences (SPSS) version 11 was used as descriptive and analytical statistics tool. The FMEA technique provides a systematic method for finding vulnerabilities in a process before they result in an error, and in this study a satisfactory outcome was reached.展开更多
To analysis the early failures of machining centers,the failure mode effect and criticality analysis( FMECA) method was used. Based on the failure data collected from production lines in test run,all the failure modes...To analysis the early failures of machining centers,the failure mode effect and criticality analysis( FMECA) method was used. Based on the failure data collected from production lines in test run,all the failure modes of machining centers were summarized and criticality of all subsystems is figured out. And the process of FMECA was improved. The most critical subsystem was manipulator subsystem. The most critical failure mode was impacted manipulator. Reasons and effect of some important failure modes were analyzed. And some suggestions to solve failures were given.展开更多
The unmanned aerial vehicles( UAV) has been becoming more and more important in the aviation industry.Despite the superior performance and advanced technology,major accident of UAV happens frequently due to the impact...The unmanned aerial vehicles( UAV) has been becoming more and more important in the aviation industry.Despite the superior performance and advanced technology,major accident of UAV happens frequently due to the impact of their systems,long distance of remote control and skill of manipulator technology.According to the application of engineering application,failure mode effects and criticality analysis( FMECA),failure reporting analysis and corrective action comprehensive analysis systems( FRACAS)and fault tree analysis( FTA)( 3 F) were combined.And also a set of user-friendly,more time,more efficient and accurate reliability analysis system were explored.展开更多
The battery management system(BMS)is the main safeguard of a battery system for electric propulsion and machine electrifcation.It is tasked to ensure reliable and safe operation of battery cells connected to provide h...The battery management system(BMS)is the main safeguard of a battery system for electric propulsion and machine electrifcation.It is tasked to ensure reliable and safe operation of battery cells connected to provide high currents at high voltage levels.In addition to efectively monitoring all the electrical parameters of a battery pack system,such as the voltage,current,and temperature,the BMS is also used to improve the battery performance with proper safety measures within the system.With growing acceptance of lithium-ion batteries,major industry sectors such as the automotive,renewable energy,manufacturing,construction,and even some in the mining industry have brought forward the mass transition from fossil fuel dependency to electric powered machinery and redefned the world of energy storage.Hence,the functional safety considerations,which are those relating to automatic protection,in battery management for battery pack technologies are particularly important to ensure that the overall electrical system,regardless of whether it is for electric transportation or stationary energy storage,is in accordance with high standards of safety,reliability,and quality.If the system or product fails to meet functional and other safety requirements on account of faulty design or a sequence of failure events,then the environment,people,and property could be endangered.This paper analyzed the details of BMS for electric transportation and large-scale energy storage systems,particularly in areas concerned with hazardous environment.The analysis covers the aspect of functional safety that applies to BMS and is in accordance with the relevant industrial standards.A comprehensive evaluation of the components,architecture,risk reduction techniques,and failure mode analysis applicable to BMS operation was also presented.The article further provided recommendations on safety design and performance optimization in relation to the overall BMS integration.展开更多
Heavy-duty machine tools are composed of many subsystems with different functions,and their reliability is governed by the reliabilities of these subsystems.It is important to rank the weaknesses of subsystems and ide...Heavy-duty machine tools are composed of many subsystems with different functions,and their reliability is governed by the reliabilities of these subsystems.It is important to rank the weaknesses of subsystems and identify the weakest subsystem to optimize products and improve their reliabilities.However,traditional ranking methods based on failure mode effect and critical analysis(FMECA)does not consider the complex maintenance of products.Herein,a weakness ranking method for the subsystems of heavy-duty machine tools is proposed based on generalized FMECA information.In this method,eight reliability indexes,including maintainability and maintenance cost,are considered in the generalized FMECA information.Subsequently,the cognition best worst method is used to calculate the weight of each screened index,and the weaknesses of the subsystems are ranked using a technique for order preference by similarity to an ideal solution.Finally,based on the failure data collected from certain domestic heavy-duty horizontal lathes,the weakness ranking result of the subsystems is obtained to verify the effectiveness of the proposed method.An improved weakness ranking method that can comprehensively analyze and identify weak subsystems is proposed herein for designing and improving the reliability of complex electromechanical products.展开更多
The objective of this work was to enhance the product’s quality by concentrating on the machine’s optimized efficiency.In order to increase the machine’s reliability,the basis of reliability-centered maintenance ap...The objective of this work was to enhance the product’s quality by concentrating on the machine’s optimized efficiency.In order to increase the machine’s reliability,the basis of reliability-centered maintenance approach was utilized.The purpose was to establish a planned preventive maintenance strategy to identify the machine’s critical components having a noteworthy effect on the product’s quality.The critical components were prioritized using failure mode and effect analysis(FMEA).The goal of the study was to decrease the ppm time interval for a CNC machine by simulating the projected preventive maintenance time interval.For this purpose,the simulation software ProModel 7.5 was implemented for the current preventive maintenance procedure to choose the best ppm time interval which contributed better norms.Five dissimilar optimization approaches were applied,however,the first approach yielded the prominent total system cost and the shorter ppm interval.The results of the study revealed that there was an increase of USD 1878 as a result of an increase in total system cost from USD 78,365 to USD 80,243.Preventive maintenance costs were reduced from USD 4196 to USD 2248(46%).The costs associated with good parts increased from USD 8259 to USD 8294(0.4%)and the costs associated with defective parts reduced from USD 171 to USD 3(98.25%),respectively.展开更多
With the widespread application of liquefied petroleum gas (LPG),the safety of LPG cylinder has received more and more attention.For the safety of LPG cylinder,we conduct a safety risk assessment of cylinder using the...With the widespread application of liquefied petroleum gas (LPG),the safety of LPG cylinder has received more and more attention.For the safety of LPG cylinder,we conduct a safety risk assessment of cylinder using the failure mode and effect analysis (FMEA) method.Taking the most influential inflatable fatigue under normal conditions as the research object,we use FE-safe software to analyze the fatigue failure.The risk compliance coefficients of various failure modes are calculated and classified according to the risk level.In this way,the service life of the LPG cylinder weld is determined.The presented method improves the safety risk assessment process of LPG cylinder and provides a good theoretical and practical basis for similar pressure vessel risk assessment.展开更多
Purpose-The application of the traditional failure mode and effects analysis(FMEA)technique has been widely questioned in evaluation information,risk factor weights and robustness of results.This paper develops a nove...Purpose-The application of the traditional failure mode and effects analysis(FMEA)technique has been widely questioned in evaluation information,risk factor weights and robustness of results.This paper develops a novel FMEA framework with extended MULTIMOORA method under interval-valued Pythagorean fuzzy environment to solve these problems.Design/methodology/approach-This paper introduces innovatively interval-value Pythagorean fuzzy weighted averaging(IVPFWA)operator,Tchebycheff metric distance and interval-value Pythagorean fuzzy weighted geometric(IVPFWG)operator into the MULTIMOORA submethods to obtain the risk ranking order for emergencies.Finally,an illustrative case is provided to demonstrate the practicality and feasibility of the novel fuzzy FMEA framework.Findings-The feasibility and validity of the proposed method are verified by comparing with the existing methods.The calculation results indicate that the proposed method is more consistent with the actual situation of project and has more reference value.Practical implications-The research results can provide supporting information for risk management decisions and offer decision-making basis for formulation of the follow-up emergency control and disposal scheme,which has certain guiding significance for the practical popularization and application of risk management strategies in the infrastructure projects.Originality/value–A novel approach using FMEA with extended MULTIMOORA method is developed under IVPF environment,which considers weights of risk factors and experts.The method proposed has significantly improved the integrity of information in expert evaluation and the robustness of results.展开更多
Healthcare waste(HCW)management plays a vital role in the development of modern society.In HCW management,failure mode and effects analysis(FMEA)is a popular method to implement risk management for improving the quali...Healthcare waste(HCW)management plays a vital role in the development of modern society.In HCW management,failure mode and effects analysis(FMEA)is a popular method to implement risk management for improving the quality of healthcare.However,the shortcomings of the traditional FMEA method have been widely discussed in literatures.This paper proposes an information fusion FMEA method based on 2-tuple linguistic information and interval probability.The 2-tuple linguistic set theory is adopted to change the heterogeneous information into interval numbers.Meanwhile,the interval probability comparison method is applied to analyze failure modes.Finally,a case study is presented to verify the reliability and effectiveness of the proposed method by comparing different FMEA methods.展开更多
基金Open access funding provided by Politecnico di Torino within the CRUI-CARE Agreement.
文摘Conformal cooling coils have been developed during the last decades through the use of additive manufacturing(AM)technologies.The main goal of this study was to analyze how the presence of an internal channel that could act as a conformal cooling coil could affect compressive strength and quasi-elastic gradient of AlSi10Mg lattice structures produced by laser powder bed fusion(LPBF).Three different configurations of samples were tested in compression at 25℃ and 200℃.The reference structures were body centered cubic(BBC)in the core of the samples with vertical struts along Z(BCCZ)lattices in the outer perimeter,labelled as NC samples.The main novelty consisted in inserting a straight elliptical channel and a 45°elliptical channel inside the BCCZ lattice structures,labelled as SC and 45C samples respectively.All the samples were then tested in as-built(AB)condition,and after two post process heat treatments,commonly used for AlSi10Mg LPBF industrial components,a stress relieving(SR)and a T6 treatment.NC lattice structures AB exhibited an overall fragile fracture and therefore the SC and 45C configuration samples were tested only after thermal treatments.The test at 25℃ showed that all types of samples were characterized by negligible variations in their quasi-elastic gradients and yield strength.On the contrary,the general trend of stress-strain curves was influenced by the presence of the channel and its position.The test at 200℃ showed that NC,SC and 45C samples after SR and T6 treatments exhibited a metal-foam like deformation.
基金Supported by Basic Research on Medical and Health Application of the People's Livelihood Science and Technology Project of Suzhou Science and Technology Bureau,No.SYS2020102.
文摘BACKGROUND Craniocerebral injuries encompass brain injuries,skull fractures,cranial soft tissue injuries,and similar injuries.Recently,the incidence of craniocerebral injuries has increased dramatically due to the increased numbers of traffic accidents and aerial work injuries,threatening the physical and mental health of patients.AIM To investigate the impact of failure modes and effects analysis(FMEA)-based emergency management on craniocerebral injury treatment effectiveness.METHODS Eighty-four patients with craniocerebral injuries,treated at our hospital from November 2019 to March 2021,were selected and assigned,using the random number table method,to study(n=42)and control(n=42)groups.Patients in the control group received conventional management while those in the study group received FMEA theory-based emergency management,based on the control group.Pre-and post-interventions,details regarding the emergency situation;levels of inflammatory stress indicators[Interleukin-6(IL-6),C-reactive protein(CRP),and procalcitonin(PCT)];incidence of complications;prognoses;and satisfaction regarding patient care were evaluated for both groups.RESULTS For the study group,the assessed parameters[pre-hospital emergency response time(9.13±2.37 min),time to receive a consultation(2.39±0.44 min),time needed to report imaging findings(1.15±4.44 min),and test reporting time(32.19±6.23 min)]were shorter than those for the control group(12.78±4.06 min,3.58±0.71 min,33.49±5.51 min,50.41±11.45 min,respectively;P<0.05).Pre-intervention serum levels of IL-6(78.71±27.59 pg/mL),CRP(19.80±6.77 mg/L),and PCT(3.66±1.82 ng/mL)in the study group patients were not significantly different from those in the control group patients(81.31±32.11 pg/mL,21.29±8.02 mg/L,and 3.95±2.11 ng/mL respectively;P>0.05);post-intervention serum indicator levels were lower in both groups than pre-intervention levels.Further,serum levels of IL-6(17.35±5.33 pg/mL),CRP(2.27±0.56 mg/L),and PCT(0.22±0.07 ng/mL)were lower in the study group than in the control group(30.15±12.38 pg/mL,3.13±0.77 mg/L,0.38±0.12 ng/mL,respectively;P<0.05).The complication rate observed in the study group(9.52%)was lower than that in the control group(26.19%,P<0.05).The prognoses for the study group patients were better than those for the control patients(P<0.05).Patient care satisfaction was higher in the study group(95.24%)than in the control group(78.57%,P<0.05).CONCLUSION FMEA-based craniocerebral injury management effectively shortens the time spent on emergency care,reduces inflammatory stress and complication risk levels,and helps improve patient prognoses,while achieving high patient care satisfaction levels.
基金National Natural Science Foundation of China(No.51565019)the Scientific Research Start-Up Program of Tongji University,China(No.20141110)
文摘It is not objective to rate the decision-making factors in the traditional failure mode and effect analysis,so fuzzy semantic theory is used in this paper.Six fuzzy semantic scales and their corresponding semantics are summarized,and a defuzzification method is studied to obtain the fuzzy value table of the six fuzzy semantic scales.For the conflicts between experts in the traditional failure mode and effects analysis,a conflict-resolution algorithm is studied to obtain the failure risk order.Finally,a certain type of industrial valve is used as an example to prove the validity of the theory proposed in this paper.
文摘In view of the low level testability of armored equipment,the important significance of armored equipment testability growth is discussed in this paper.The failure mode effects and criticality analysis( FMECA) method to realize testability growth is introduced.Centering on the testability growth demands of new armored equipment,the deficiencies of traditional FMECA are analyzed.And an enhanced FMECA( EFMECA) method is proposed.The method increases the analysis contents,combines the information before the failure occurrence and impending failure modes together organically.Then the failure symptoms is analyzed,the failure modes and effects is determined,and the state development trend is predicted.Finally,the application of EFMECA method is illustrated by the example of the failure mode of typical armored equipment engine.
基金Young Scholar Program of Hebei Pharmaceutical Association Hospital Pharmaceutical Research Project(2020—Hbsyxhqn0029)Science and Technology Research and Development Project of Chengde City,Hebei Province(201706A043).
文摘[Objectives]To investigate the effect of healthcare failure mode and effect analysis(HFMEA)on reducing error risk of neonatal parenteral nutrition solution dispensing.[Methods]A research team was established to identify the failure mode(FM)in each link of the formulation process of neonatal parenteral nutrition solution by HFMEA,quantify the severity(S),occurrence(O)and detection(D)of FM,and evaluate FM by risk priority number(RPN).For FM with the values of RPN>16,failure cause analysis was conducted,and corresponding improvement measures were formulated.The weight coefficient and random consistency ratio(CR)of deployment process were calculated in Matlab R2018a by compiling the Analytic Hierarchy Process(AHP)program.Six months after the implementation of improvement measures,the implementation effect was evaluated by comparing the changes of the values of RPN which was evaluated comprehensively and the rate of dispensing errors before and after the implementation of HFMEA.[Results]In the preparation process of neonatal parenteral nutrition solution,a total of 13 FMs with medium and above risk were found,the weight coefficient of medical order review,dosing and mixing was 0.2703,the weight coefficient of drug dispensing check and review was 0.1432,the weight coefficient of print label was 0.1015,the weight coefficient of distribution was 0.0716,and CR=0.0491<0.1.After six months of intervention,the total RPN value decreased by 64.81%from 127.8 to 45.0.The deployment error rates were significantly lower after the implementation,and the difference was statistically significant(P<0.05).[Conclusions]HFMEA can effectively reduce the error risk in preparation of neonatal parenteral nutrition solution,improve the quality of dispensing and promote the safety of neonatal medication.
文摘The recognition and management of risk in donation process and blood product is critical to ensure donor and patient safety. To achieve this goal, the failure mode and effects analysis (FMEA) is a convenient method;moreover it was used to prevent the occurrence of adverse events and look at what could go strong at each step. This study aimed to utilize FMEA in central blood bank in Khartoum to evaluate the potential risk and adverse event that may occur during the donation process. According to the severity, occurrence and the detection of each failure mode, the risk priority number (RPN) was calculated to determine which of the failures should take priority to find a solution and applying corrective action to reduce the failure risk. The statistical package for social sciences (SPSS) version 11 was used as descriptive and analytical statistics tool. The FMEA technique provides a systematic method for finding vulnerabilities in a process before they result in an error, and in this study a satisfactory outcome was reached.
基金National Science and Technology Major Project of China(No.2013ZX04012071)
文摘To analysis the early failures of machining centers,the failure mode effect and criticality analysis( FMECA) method was used. Based on the failure data collected from production lines in test run,all the failure modes of machining centers were summarized and criticality of all subsystems is figured out. And the process of FMECA was improved. The most critical subsystem was manipulator subsystem. The most critical failure mode was impacted manipulator. Reasons and effect of some important failure modes were analyzed. And some suggestions to solve failures were given.
基金Naional Natural Science Foundntion of China(No.71761030)
文摘The unmanned aerial vehicles( UAV) has been becoming more and more important in the aviation industry.Despite the superior performance and advanced technology,major accident of UAV happens frequently due to the impact of their systems,long distance of remote control and skill of manipulator technology.According to the application of engineering application,failure mode effects and criticality analysis( FMECA),failure reporting analysis and corrective action comprehensive analysis systems( FRACAS)and fault tree analysis( FTA)( 3 F) were combined.And also a set of user-friendly,more time,more efficient and accurate reliability analysis system were explored.
基金supported by Azure Mining Technology,CCTEG,and the University of Wollongong.
文摘The battery management system(BMS)is the main safeguard of a battery system for electric propulsion and machine electrifcation.It is tasked to ensure reliable and safe operation of battery cells connected to provide high currents at high voltage levels.In addition to efectively monitoring all the electrical parameters of a battery pack system,such as the voltage,current,and temperature,the BMS is also used to improve the battery performance with proper safety measures within the system.With growing acceptance of lithium-ion batteries,major industry sectors such as the automotive,renewable energy,manufacturing,construction,and even some in the mining industry have brought forward the mass transition from fossil fuel dependency to electric powered machinery and redefned the world of energy storage.Hence,the functional safety considerations,which are those relating to automatic protection,in battery management for battery pack technologies are particularly important to ensure that the overall electrical system,regardless of whether it is for electric transportation or stationary energy storage,is in accordance with high standards of safety,reliability,and quality.If the system or product fails to meet functional and other safety requirements on account of faulty design or a sequence of failure events,then the environment,people,and property could be endangered.This paper analyzed the details of BMS for electric transportation and large-scale energy storage systems,particularly in areas concerned with hazardous environment.The analysis covers the aspect of functional safety that applies to BMS and is in accordance with the relevant industrial standards.A comprehensive evaluation of the components,architecture,risk reduction techniques,and failure mode analysis applicable to BMS operation was also presented.The article further provided recommendations on safety design and performance optimization in relation to the overall BMS integration.
基金Supported by National Nat ural Science Foundation of China(Grant Nos.51675227,51975249)Jilin Province Science and Technology Development Funds(Grant Nos.20180201007GX,20190302017GX)+2 种基金Technology Development and Research of Jilin Province(Grant No.2019C037-01)Changchun Science and Technology Planning Project(Grant No.19SS011)National Science and technology Major Project(Grant No.2014ZX04015031).
文摘Heavy-duty machine tools are composed of many subsystems with different functions,and their reliability is governed by the reliabilities of these subsystems.It is important to rank the weaknesses of subsystems and identify the weakest subsystem to optimize products and improve their reliabilities.However,traditional ranking methods based on failure mode effect and critical analysis(FMECA)does not consider the complex maintenance of products.Herein,a weakness ranking method for the subsystems of heavy-duty machine tools is proposed based on generalized FMECA information.In this method,eight reliability indexes,including maintainability and maintenance cost,are considered in the generalized FMECA information.Subsequently,the cognition best worst method is used to calculate the weight of each screened index,and the weaknesses of the subsystems are ranked using a technique for order preference by similarity to an ideal solution.Finally,based on the failure data collected from certain domestic heavy-duty horizontal lathes,the weakness ranking result of the subsystems is obtained to verify the effectiveness of the proposed method.An improved weakness ranking method that can comprehensively analyze and identify weak subsystems is proposed herein for designing and improving the reliability of complex electromechanical products.
基金This research is fully supported by HEC Grant of Research for publishing scientific articles.The authors fully acknowledge support from Sarhad University of Science and Information Technology for the approved fund which makes this research viable and effective.
文摘The objective of this work was to enhance the product’s quality by concentrating on the machine’s optimized efficiency.In order to increase the machine’s reliability,the basis of reliability-centered maintenance approach was utilized.The purpose was to establish a planned preventive maintenance strategy to identify the machine’s critical components having a noteworthy effect on the product’s quality.The critical components were prioritized using failure mode and effect analysis(FMEA).The goal of the study was to decrease the ppm time interval for a CNC machine by simulating the projected preventive maintenance time interval.For this purpose,the simulation software ProModel 7.5 was implemented for the current preventive maintenance procedure to choose the best ppm time interval which contributed better norms.Five dissimilar optimization approaches were applied,however,the first approach yielded the prominent total system cost and the shorter ppm interval.The results of the study revealed that there was an increase of USD 1878 as a result of an increase in total system cost from USD 78,365 to USD 80,243.Preventive maintenance costs were reduced from USD 4196 to USD 2248(46%).The costs associated with good parts increased from USD 8259 to USD 8294(0.4%)and the costs associated with defective parts reduced from USD 171 to USD 3(98.25%),respectively.
文摘With the widespread application of liquefied petroleum gas (LPG),the safety of LPG cylinder has received more and more attention.For the safety of LPG cylinder,we conduct a safety risk assessment of cylinder using the failure mode and effect analysis (FMEA) method.Taking the most influential inflatable fatigue under normal conditions as the research object,we use FE-safe software to analyze the fatigue failure.The risk compliance coefficients of various failure modes are calculated and classified according to the risk level.In this way,the service life of the LPG cylinder weld is determined.The presented method improves the safety risk assessment process of LPG cylinder and provides a good theoretical and practical basis for similar pressure vessel risk assessment.
基金acknowledge with gratitude National Key R&D Program of China(No.2018YFC0406905)the MOE(Ministry of Education in China)Project of Humanities and Social Sciences(No.19YJC630078)+4 种基金Youth Talents Teachers Scheme of Henan Province Universities(No.2018GGJS080)the National Natural Science Foundation of China(No.71974056,No.71302191)the Foundation for Distinguished Young Talents in Higher Education of Henan(Humanities&Social Sciences),China(No.2017-cxrc-023)China Scholarship Council(No.201908410388)2018 Henan Province Water Conservancy Science and Technology Project(GG201828)。
文摘Purpose-The application of the traditional failure mode and effects analysis(FMEA)technique has been widely questioned in evaluation information,risk factor weights and robustness of results.This paper develops a novel FMEA framework with extended MULTIMOORA method under interval-valued Pythagorean fuzzy environment to solve these problems.Design/methodology/approach-This paper introduces innovatively interval-value Pythagorean fuzzy weighted averaging(IVPFWA)operator,Tchebycheff metric distance and interval-value Pythagorean fuzzy weighted geometric(IVPFWG)operator into the MULTIMOORA submethods to obtain the risk ranking order for emergencies.Finally,an illustrative case is provided to demonstrate the practicality and feasibility of the novel fuzzy FMEA framework.Findings-The feasibility and validity of the proposed method are verified by comparing with the existing methods.The calculation results indicate that the proposed method is more consistent with the actual situation of project and has more reference value.Practical implications-The research results can provide supporting information for risk management decisions and offer decision-making basis for formulation of the follow-up emergency control and disposal scheme,which has certain guiding significance for the practical popularization and application of risk management strategies in the infrastructure projects.Originality/value–A novel approach using FMEA with extended MULTIMOORA method is developed under IVPF environment,which considers weights of risk factors and experts.The method proposed has significantly improved the integrity of information in expert evaluation and the robustness of results.
基金supported by the National Natural Science Foundation of China(Nos.71931006,71702072)the Natural Science Foundation for Jiangsu Institutions(No.BK20170810)the China Postdoctoral Science Foundation(No.2019T120429,2017M611808)
文摘Healthcare waste(HCW)management plays a vital role in the development of modern society.In HCW management,failure mode and effects analysis(FMEA)is a popular method to implement risk management for improving the quality of healthcare.However,the shortcomings of the traditional FMEA method have been widely discussed in literatures.This paper proposes an information fusion FMEA method based on 2-tuple linguistic information and interval probability.The 2-tuple linguistic set theory is adopted to change the heterogeneous information into interval numbers.Meanwhile,the interval probability comparison method is applied to analyze failure modes.Finally,a case study is presented to verify the reliability and effectiveness of the proposed method by comparing different FMEA methods.
