Single mode-multimode-single mode （SMS） sensor is widely used for parameters measurement, such as bending, dis-placement, temperature, strain, refractive index, etc. Generally, SMS sensor has advantages of simpl...Single mode-multimode-single mode （SMS） sensor is widely used for parameters measurement, such as bending, dis-placement, temperature, strain, refractive index, etc. Generally, SMS sensor has advantages of simple structure, low cost and easy layout, therefore it has become a research hotspot in recent years. In this paper, the multimode fiber with large core is used for manufacturing SMS structure with high sensitivity. Firstly, the multimode fiber with core/cladding diameters of 105/ 125 jitm has access to the system by means of single mode optical fiber. Secondly, SMS device structure is manufactured by welding the eccentric shaft of multimode optical fiber. Afterwards, mode interference effect and spectral response characteristics of the structure of single mode-multimode-single mode optical fiber are analyzed theoretically. Finally, with the help of a wide spectrum light source and a spectrum analyzer, the transmission spectra characteristics of SMS optical fiber with strain is tested. By observing the curve that the wave changes with stress, the sensitivity is calculated and it is consistent with theoretical value .展开更多
To address the restriction of fiber-optic surface plasmon resonance(SPR) sensors in the field of multi-sample detection, a novel dual-channel fiber-optic SPR sensor based on the cascade of coaxial dual-waveguide D-typ...To address the restriction of fiber-optic surface plasmon resonance(SPR) sensors in the field of multi-sample detection, a novel dual-channel fiber-optic SPR sensor based on the cascade of coaxial dual-waveguide D-type structure and microsphere structure is proposed in this paper. The fiber sidepolishing technique converts the coaxial dual-waveguide fiber into a D-type one, and the evanescent wave in the ring core leaks, generating a D-type sensing region;the fiber optic fused ball push technology converts the coaxial dual waveguides into microspheres, and the stimulated cladding mode evanescent wave leaks, producing the microsphere sensing region. By injecting light into the coaxial dual-waveguide middle core alone, the sensor can realize single-stage sensing in the microsphere sensing area;it can also realize dual-channel sensing in the D-type sensing area and microsphere sensing area by injecting light into the ring core. The refractive index measurement ranges for the two channels are 1.333–1.365 and 1.375–1.405, respectively, with detection sensitivities of 981.56 nm/RIU and 4138 nm/RIU. The sensor combines wavelength division multiplexing and space division multiplexing technologies, presenting a novel research concept for multi-channel fiber SPR sensors.展开更多
We propose and demonstrate an all-fiber liquid-level sensor using an in-line multimode-single-mode-multimode (MSM) fiber structure. A piece of single-mode fiber (SMF) is spliced to two sections of equivalent multimode...We propose and demonstrate an all-fiber liquid-level sensor using an in-line multimode-single-mode-multimode (MSM) fiber structure. A piece of single-mode fiber (SMF) is spliced to two sections of equivalent multimode fiber (MMF) which are used as both mode splitter and mode coupler. The cladding mode will be excited when the light propagates from MMF to SMF, and then it will be combined with fundamental mode to form a Mach-Zehnder interferometer (MZI) when the light propagates from SMF to the other MMF. The liquid level is detected by the selected resonant dips shift of the transmission spectrum. A sensing sensitivity of 264.6 pm/mm is achieved for the proposed sensor with an SMF length of 26mm. Due to its compact structure, easy fabrication, and high sensitivity, the proposed liquid-level sensor is attractive for practical applications in a variety of fields, such as marine detection and chemical processing.展开更多
A singlemode-multimode-singlemode （SMS） fiber structure for temperature measurement using an optical time domain reflectometer （OTDR）-based interrogation system is proposed. A temperature measurement range of 40 ...A singlemode-multimode-singlemode （SMS） fiber structure for temperature measurement using an optical time domain reflectometer （OTDR）-based interrogation system is proposed. A temperature measurement range of 40 ℃-195 ℃ with a resolution of 0.12 ℃ and a linearity of 0.992 could be achieved for the multimode fiber （MMF） graded index with a length of 60mm. It was also demonstrated that two-point temperature measurement with two SMS fiber structures as temperature sensors could be made. The proposed temperature measurement system offered a high resolution and also benefited from a simple configuration with a capability of multi-point temperature measurement.展开更多
A modal interferometer is experimentally demonstrated based on tapering a single-mode-multimode-single- mode （SMS） fiber structure heated by hydrogen flame. The interference fringe begins to form when tapering lengt...A modal interferometer is experimentally demonstrated based on tapering a single-mode-multimode-single- mode （SMS） fiber structure heated by hydrogen flame. The interference fringe begins to form when tapering length is 19.8 mm, and becomes regular and clear when the tapering length is longer and the tapered waist diameter is smaller. Annealing process is undertaken to achieve a high extension ratio of approximately 17 dB with free spectral range of 1.5 nm when the tapering length is 33 mm and the tapered waist diameter is approximately 5 μm. The temperature and axial strain dependences of the tapered SMS structure are characterized, and the measured temperature and strain coefficients are ＋7 pm/℃ and -9.536 pm/με, respectively.展开更多
Novel 2×2 torsion-mirror optical switch arrays are fabricated by using the mixed micromachining based on the surface and bulk silicon microelectronics,then are investigated electromechanically in applied direct a...Novel 2×2 torsion-mirror optical switch arrays are fabricated by using the mixed micromachining based on the surface and bulk silicon microelectronics,then are investigated electromechanically in applied direct and alternating electric fields.When the thickness of the elastic torsion beams suspending the aluminum coated polysilicon micro-mirrors of the switches in the arrays is about 1μm,the electrostatic yielding voltages for driving the mirrors to achieve their ON-state are in the range of 270～290V,and the minimum holding voltages for mirrors ON-state are found as 55V or so.Theoretical analysis manifests that the yielding voltage is more sensitive to beam thickness than other design parameters do about the torsion-mirror switch structures.The lifetime can reach 10 8 times.The estimated shortest switching time of the switches at least lasts for less than 2ms.The force analysis on the two kinds of new fiber self-holding structures integrated monolithically in the chip of the optical switch arrays indicates that the structures can feature self-fixing and self-aligning of optical fibers.展开更多
In this Letter, an alternative solution is proposed and demonstrated for simultaneous measurement of axial strain and temperature. This sensor consists of two twisted points on a commercial single mode fiber introduce...In this Letter, an alternative solution is proposed and demonstrated for simultaneous measurement of axial strain and temperature. This sensor consists of two twisted points on a commercial single mode fiber introduced by flame-heated and rotation treatment. The fabrication process modifies the geometrical configuration and refractive index of the fiber. Different cladding modes are excited at the first twisted point, and part of them are coupled back to the fiber core at the second twisted point. Experimental results show distinct sensitivities of 34.9 pm/με with 49.23 pm/℃ and -36.19 pm/με with 62.99 pm/℃ for the two selected destructive interference wavelengths.展开更多
On July 14, 2000, a type IV solar radio burst was observed at 10:43-11:00 UT with the 1-2 GHz digital spectrometer of National Astronomical Observatories of China (NAOC). Many fiber fine structures superposed on the t...On July 14, 2000, a type IV solar radio burst was observed at 10:43-11:00 UT with the 1-2 GHz digital spectrometer of National Astronomical Observatories of China (NAOC). Many fiber fine structures superposed on the type IV burst were detected in the same interval. A theoretical interpretation for the fibers is performed based upon a model of magnetic-mirror loop configuration in the solar corona. In this model, the source of the fiber emission is considered as the ducting of whistler solitons within the magnetic-mirror loop. A quantitative estimation using the observed data indicats that the magnetic field strength of the radio source is about 1.451×10 -2≤B 0≤2.734×10 -2 T, and that a fiber is composed of 4×10 15 solitons occupying a volume of about 1.2×108 km3. For the duct through which the whistler solitons passed within the magnetic-mirror loop, its diameter and the length are worked out, namely, d≈120 km and Δr≈104 km, respectively.展开更多
The regenerated cellulose fibers, made from wood pulp, have excellent physical properties like cotton fiber. Especially polynosic fibers can be mercerized by alkali, but conventional Viscose fiber can not be treated o...The regenerated cellulose fibers, made from wood pulp, have excellent physical properties like cotton fiber. Especially polynosic fibers can be mercerized by alkali, but conventional Viscose fiber can not be treated or mercerized by alkali. The paper studies on behavior of polynosic fibers treated by alkali, including physical properties, such as weight loss, tensile strength and elongation, and fiber structures properties. In this paper, on the basis of study on polynosic fibers treated by alkali, the conclusions were drawn as following. Firstly, polynosic fiber is good at alkali resistance. Secondly, the changes of fiber structure and physical properties begin declining at 5 wt% NaOH concentration and reverse changes take place at 10 wt%.展开更多
This paper deals with the concurrent multi-scale optimization design of frame structure composed of glass or carbon fiber reinforced polymer laminates. In the composite frame structure, the fiber winding angle at the ...This paper deals with the concurrent multi-scale optimization design of frame structure composed of glass or carbon fiber reinforced polymer laminates. In the composite frame structure, the fiber winding angle at the micro-material scale and the geometrical parameter of components of the frame in the macro-structural scale are introduced as the independent variables on the two geometrical scales. Considering manufacturing requirements, discrete fiber winding angles are specified for the micro design variable. The improved Heaviside penalization discrete material optimization interpolation scheme has been applied to achieve the discrete optimization design of the fiber winding angle. An optimization model based on the minimum structural compliance and the specified fiber material volume constraint has been established. The sensitivity information about the two geometrical scales design variables are also deduced considering the characteristics of discrete fiber winding angles. The optimization results of the fiber winding angle or the macro structural topology on the two single geometrical scales, together with the concurrent two-scale optimization, is separately studied and compared in the paper. Numerical examples in the paper show that the concurrent multi-scale optimization can further explore the coupling effect between the macro-structure and micro-material of the composite to achieve an ultralight design of the composite frame structure. The novel two geometrical scales optimization model provides a new opportunity for the design of composite structure in aerospace and other industries.展开更多
Reinforced concrete(RC) load bearing wall is widely used in high-rise and mid-rise buildings. Due to the number of walls in plan and reduction in lateral force portion, this system is not only stronger against earthqu...Reinforced concrete(RC) load bearing wall is widely used in high-rise and mid-rise buildings. Due to the number of walls in plan and reduction in lateral force portion, this system is not only stronger against earthquakes, but also more economical. The effect of progressive collapse caused by removal of load bearing elements, in various positions in plan and stories of the RC load bearing wall system was evaluated by nonlinear dynamic and static analyses. For this purpose, three-dimensional model of 10-story structure was selected. The analysis results indicated stability, strength and stiffness of the RC load-bearing wall system against progressive collapse. It was observed that the most critical condition for removal of load bearing walls was the instantaneous removal of the surrounding walls located at the corners of the building where the sections of the load bearing elements were changed. In this case, the maximum vertical displacement was limited to 6.3 mm and the structure failed after applying the load of 10 times the axial load bored by removed elements. Comparison between the results of the nonlinear dynamic and static analyses demonstrated that the "load factor" parameter was a reasonable criterion to evaluate the progressive collapse potential of the structure.展开更多
The multi-layer cylindrical helicoidal fiber structure(MCHFS)exists widely in biological materials such as bone and wood at the microscale.MCHFSs typically function as reinforcing elements to enhance the toughness of ...The multi-layer cylindrical helicoidal fiber structure(MCHFS)exists widely in biological materials such as bone and wood at the microscale.MCHFSs typically function as reinforcing elements to enhance the toughness of materials.In this study,we establish a shear lag-based pullout model of the cylindrical helicoidal fiber(CHF)for investigating interlayer stress transfer and debonding behaviors,with implications regarding the underlying toughening mechanism of MCHFS.Based on the shear lag assumptions,analytical solutions for the stress and displacement fields of the MCHFS during the pullout are derived by considering the CHF as a cylindrically monoclinic material and verified through the 3D finite element simulation.It is found that the helical winding of CHF results in both axial and hoop interlayer shear stresses.Both the helical winding angle and the elastic moduli of the fiber and matrix have significant influences on interlayer stress transfer.This work reveals a new interlayer stress transfer mechanism in the MCHFS existing widely in biological materials.展开更多
Here we reported a heterogeneous fiberous structured Mg-5.6Zn-0.6Zr(wt%)alloy obtained by conventional extrusion method,which exhibited high yield strength of∼345 MPa,ultimate tensile strength of∼370 MPa,and high te...Here we reported a heterogeneous fiberous structured Mg-5.6Zn-0.6Zr(wt%)alloy obtained by conventional extrusion method,which exhibited high yield strength of∼345 MPa,ultimate tensile strength of∼370 MPa,and high tensile strain of∼20.5%,superior to most of the Mg-Zn based alloys reported so far.The extraordinarily high mechanical properties were mainly attributed to the heterogeneous fiberous structure consisting of alternating coarse-and fine-grain layers.Grains in the different layers grew into the neighboring layers,ensuring a good layer bonding.A high Schmid factor and geometric compatibility factor for pyramidal slip led to full slip transfer between the neighboring coarse grains and fine grains,which could help to release the stress concentration and avoid early fracture.The profuse acti-vated<c+a>glide dislocations could render the unprecedented high tensile strain.The constraint by the hard fine-grain domains made the soft coarse-grain domains strong like the hard fine-grain domains,as well as the nanoscale precipitates pinning dislocations,contributed to the high strength.The hetero-geneous microstructure design was shown to have synergistic improvement in strength-ductility balance,which could be an inspiring strategy to improve mechanical properties of hexagonal close-packed(hcp)metals.展开更多
This paper presents a long-range displacement measurement method by using a single- multi-single mode （SMS） fiber structure, attached to a flexible plate between two permanent poles and the optical time domain refle...This paper presents a long-range displacement measurement method by using a single- multi-single mode （SMS） fiber structure, attached to a flexible plate between two permanent poles and the optical time domain reflectometer （OTDR）-based interrogator. The SMS fiber structure sensors are prepared with two different configurations, i.e. straight and sinusoidal configurations. It is demonstrated that the displacement sensor can perform a displacement measurement with a range from 0 mm to 150 mm with a resolution of 0.159 mm. The sinusoidal configuration provides a better sensitivity than the straight configuration. The proposed sensor offers a low cost, and it can be implemented for quasi-distributed displacement measurement which is suitable for civil structure monitoring.展开更多
Density functional based tight binding (DFTB) model is employed to study the sp3-to-sp2 transformation of diamond-like carbon at elevated temperatures. The understanding could lead to the direct-growth of graphene on ...Density functional based tight binding (DFTB) model is employed to study the sp3-to-sp2 transformation of diamond-like carbon at elevated temperatures. The understanding could lead to the direct-growth of graphene on a wide variety of substrates.展开更多
We studied the characteristics of two-scale pore structure of preform in the deposition process and the mass transfer of reactant gas in dual-scale pores, and observed the physiochemical phenomenon associated with the...We studied the characteristics of two-scale pore structure of preform in the deposition process and the mass transfer of reactant gas in dual-scale pores, and observed the physiochemical phenomenon associated with the reaction. Thereby, we established mathematical models on two scales, respectively, preform and reactor. These models were used for the numerical simulation of the process of ceramic matrix composites densified by isothermal chemical vapor infiltration(ICVI). The models were used to carry out a systematic study on the influence of process conditions and the preform structure on the densification behaviors. The most important findings of our study are that the processing time could be reduced by about 50% without compromising the quality of the material, if the processing temperature is 950-1 000 ℃ for the first 70 hours and then raised to 1 100 ℃.展开更多
High-sensitivity monitoring solutions are crucial for early warning systems of earth structures. In this paper, we discuss the design and implementation of such systems for natural and engineered slopes using two case...High-sensitivity monitoring solutions are crucial for early warning systems of earth structures. In this paper, we discuss the design and implementation of such systems for natural and engineered slopes using two case studies. At the Gradenbach Observatory, one key element of the monitoring system is a large fiber optic strain rosette embedded in the slope. We demonstrate that the strain rosette can depict landslide deformations much earlier than geodetic sensors like GPS or total stations and is therefore well suitable for an early warning system. In a second application we report the construction of a reinforced earth structure using geogrids. A distributed fiber optic measurement system was installed to measure the current operating grade of the geogrids within the earth structure. About 2 km of Brillouin sensing cables were installed in the project area. It is demonstrated that the developed monitoring system is well suited for assessing the current state of health of reinforced earth structures.展开更多
Grating writing in structured optical fibers is reviewed. Various laser sources have been used including UV and near IR nanosecond and femtosecond lasers, each enabling different material processing regimes. The issue...Grating writing in structured optical fibers is reviewed. Various laser sources have been used including UV and near IR nanosecond and femtosecond lasers, each enabling different material processing regimes. The issue of scattering is modeled through simulation and compared with experiment. Good agreement has been established.展开更多
Electrochemical CO_(2)reduction is a sustainable approach in green chemistry that enables the production of valuable chemicals and fuels while mitigating the environmental impact associated with CO_(2)emissions.Despit...Electrochemical CO_(2)reduction is a sustainable approach in green chemistry that enables the production of valuable chemicals and fuels while mitigating the environmental impact associated with CO_(2)emissions.Despite its several advantages,this technology suffers from an intrinsically low CO_(2)solubility in aqueous solutions,resulting in a lower local CO_(2)concentration near the electrode,which yields lower current densities and restricts product selectivity.Gas diffusion electrodes(GDEs),particularly those with tubular architectures,can solve these issues by increasing the local CO_(2)concentration and triple-phase interface,providing abundant electroactive sites to achieve superior reaction rates.In this study,robust and self-supported Cu flow-through gas diffusion electrodes(FTGDEs)were synthesized for efficient formate production via electrochemical CO_(2)reduction.They were further compared with traditional Cu electrodes,and it was found that higher local CO_(2)concentration due to improved mass transfer,the abundant surface area available for the generation of the triple-phase interface,and the porous structure of Cu FTGDEs enabled high formate Faradaic efficiency(76%)and current density(265 mA¸cm^(−2))at–0.9 V vs.reversible hydrogen electrode(RHE)in 0.5 mol·L^(−1)KHCO3.The combined phase inversion and calcination process of the Cu FTGDEs helped maintain a stable operation for several hours.The catalytic performance of the Cu FTGDEs was further investigated in a non-gas diffusion configuration to demonstrate the impact of local gas concentration on the activity and performance of electrochemical CO_(2)reduction.This study demonstrates the potential of flow-through gas-diffusion electrodes to enhance reaction kinetics for the highly efficient and selective reduction of CO_(2),offering promising applications in sustainable electrochemical processes.展开更多
While manganese-based cathodes have been intensively studied for zinc-ion batteries(ZIBs),the limited rate capability and cycle life have always been a difficult problem to be solved.Here,we report a mixed valent mang...While manganese-based cathodes have been intensively studied for zinc-ion batteries(ZIBs),the limited rate capability and cycle life have always been a difficult problem to be solved.Here,we report a mixed valent manganese oxide(MnOx)cathode with superior electrochemical performance,which exhibits a high specific capacity of 450 mA h/g at 0.2 C and a satisfactory specific capacity of 158.3 mA h/g at a high rate of 5 C.The mixed cathode system reduces the charge transfer resistance,and show good surface stability and adsorption properties,so it is beneficial for the storage of Zn^(2+).Meanwhile,coaxial fiber ZIBs(CFZIBs)with splendid flexibility are assembled utilizing the elaborately prepared cathode material.The CFZIBs achieve a reversible capacity of 255.8 m A h/g and the capacity retention rate is as high as 80%after 1000 bending deformations.This study provides new opportunities for designing ZIBs with high performance and high flexibility.展开更多
基金National Natural Science Foundation of China(No.61405127)Shanxi Province Science Foundation for Youths(No.2014021023-1)+1 种基金Scientific and Technologial Innovation Programs of Higher Education Institutions in ShanxiProgram for the Top Young Academic Leaders of Higher Learning Institutions of Shanxi
文摘Single mode-multimode-single mode （SMS） sensor is widely used for parameters measurement, such as bending, dis-placement, temperature, strain, refractive index, etc. Generally, SMS sensor has advantages of simple structure, low cost and easy layout, therefore it has become a research hotspot in recent years. In this paper, the multimode fiber with large core is used for manufacturing SMS structure with high sensitivity. Firstly, the multimode fiber with core/cladding diameters of 105/ 125 jitm has access to the system by means of single mode optical fiber. Secondly, SMS device structure is manufactured by welding the eccentric shaft of multimode optical fiber. Afterwards, mode interference effect and spectral response characteristics of the structure of single mode-multimode-single mode optical fiber are analyzed theoretically. Finally, with the help of a wide spectrum light source and a spectrum analyzer, the transmission spectra characteristics of SMS optical fiber with strain is tested. By observing the curve that the wave changes with stress, the sensitivity is calculated and it is consistent with theoretical value .
基金supported by the National Natural Science Foundation of China (Grant No. 61705025)the Natural Science Foundation of Chongqing (Grant Nos. cstc2019jcyjmsxm X043 and cstc2018jcyj AX0817)+2 种基金the Fund from the Science and Technology Project Affiliated to the Education Department of Chongqing Municipality (Grant Nos. KJQN201801217, KJQN202001214, KJQN201901226, and KJ1710247)the Fund from Chongqing Key Laboratory of Geological Environment Monitoring and Disaster Early-Warning in Three Gorges Reservoir Area (Grant Nos. ZD2020A0103 and ZD2020A0102)the Fundamental Research Funds for Chongqing Three Gorges University of China (Grant No. 19ZDPY08)。
文摘To address the restriction of fiber-optic surface plasmon resonance(SPR) sensors in the field of multi-sample detection, a novel dual-channel fiber-optic SPR sensor based on the cascade of coaxial dual-waveguide D-type structure and microsphere structure is proposed in this paper. The fiber sidepolishing technique converts the coaxial dual-waveguide fiber into a D-type one, and the evanescent wave in the ring core leaks, generating a D-type sensing region;the fiber optic fused ball push technology converts the coaxial dual waveguides into microspheres, and the stimulated cladding mode evanescent wave leaks, producing the microsphere sensing region. By injecting light into the coaxial dual-waveguide middle core alone, the sensor can realize single-stage sensing in the microsphere sensing area;it can also realize dual-channel sensing in the D-type sensing area and microsphere sensing area by injecting light into the ring core. The refractive index measurement ranges for the two channels are 1.333–1.365 and 1.375–1.405, respectively, with detection sensitivities of 981.56 nm/RIU and 4138 nm/RIU. The sensor combines wavelength division multiplexing and space division multiplexing technologies, presenting a novel research concept for multi-channel fiber SPR sensors.
基金This study was supported in part by the National Natural Science Foundation of China (NSFC) (Grant Nos. 61727816, 61520106013, and 61705031)in part by China Postdoctoral Science Foundation (Grant Nos. 2017M610175 and 2018T110216)in part by Fundamental Research Funds for Central Universities (Grant No. DUT19LAB32) Sponsor, and financial support acknowledgments are placed here.
文摘We propose and demonstrate an all-fiber liquid-level sensor using an in-line multimode-single-mode-multimode (MSM) fiber structure. A piece of single-mode fiber (SMF) is spliced to two sections of equivalent multimode fiber (MMF) which are used as both mode splitter and mode coupler. The cladding mode will be excited when the light propagates from MMF to SMF, and then it will be combined with fundamental mode to form a Mach-Zehnder interferometer (MZI) when the light propagates from SMF to the other MMF. The liquid level is detected by the selected resonant dips shift of the transmission spectrum. A sensing sensitivity of 264.6 pm/mm is achieved for the proposed sensor with an SMF length of 26mm. Due to its compact structure, easy fabrication, and high sensitivity, the proposed liquid-level sensor is attractive for practical applications in a variety of fields, such as marine detection and chemical processing.
基金This work was supported Technology Research Grant Science Foundation. by Science and Indonesia Toray
文摘A singlemode-multimode-singlemode （SMS） fiber structure for temperature measurement using an optical time domain reflectometer （OTDR）-based interrogation system is proposed. A temperature measurement range of 40 ℃-195 ℃ with a resolution of 0.12 ℃ and a linearity of 0.992 could be achieved for the multimode fiber （MMF） graded index with a length of 60mm. It was also demonstrated that two-point temperature measurement with two SMS fiber structures as temperature sensors could be made. The proposed temperature measurement system offered a high resolution and also benefited from a simple configuration with a capability of multi-point temperature measurement.
基金supported in part by the National "973" Program of China(No.2011CB301700)the National Natural Science Foundation of China(Nos.61007052, 61071011,61107041,61127016)+3 种基金the International Cooperation Project from the Ministry of Science and Technology of China(No.2011FDA11780)the STCSM Project(Nos.09JC1408100,10DJ1400402)the "SMC Young Star" Scientist Program of Shanghai Jiao Tong Universitythe National Key Lab Projects(No. GKZD030021)
文摘A modal interferometer is experimentally demonstrated based on tapering a single-mode-multimode-single- mode （SMS） fiber structure heated by hydrogen flame. The interference fringe begins to form when tapering length is 19.8 mm, and becomes regular and clear when the tapering length is longer and the tapered waist diameter is smaller. Annealing process is undertaken to achieve a high extension ratio of approximately 17 dB with free spectral range of 1.5 nm when the tapering length is 33 mm and the tapered waist diameter is approximately 5 μm. The temperature and axial strain dependences of the tapered SMS structure are characterized, and the measured temperature and strain coefficients are ＋7 pm/℃ and -9.536 pm/με, respectively.
文摘Novel 2×2 torsion-mirror optical switch arrays are fabricated by using the mixed micromachining based on the surface and bulk silicon microelectronics,then are investigated electromechanically in applied direct and alternating electric fields.When the thickness of the elastic torsion beams suspending the aluminum coated polysilicon micro-mirrors of the switches in the arrays is about 1μm,the electrostatic yielding voltages for driving the mirrors to achieve their ON-state are in the range of 270～290V,and the minimum holding voltages for mirrors ON-state are found as 55V or so.Theoretical analysis manifests that the yielding voltage is more sensitive to beam thickness than other design parameters do about the torsion-mirror switch structures.The lifetime can reach 10 8 times.The estimated shortest switching time of the switches at least lasts for less than 2ms.The force analysis on the two kinds of new fiber self-holding structures integrated monolithically in the chip of the optical switch arrays indicates that the structures can feature self-fixing and self-aligning of optical fibers.
基金supported by the National Natural Science Foundation of China(Nos.61775070 and 61275083)the Fundamental Research Funds for the Central Universities(No.2017KFYXJJ032)
文摘In this Letter, an alternative solution is proposed and demonstrated for simultaneous measurement of axial strain and temperature. This sensor consists of two twisted points on a commercial single mode fiber introduced by flame-heated and rotation treatment. The fabrication process modifies the geometrical configuration and refractive index of the fiber. Different cladding modes are excited at the first twisted point, and part of them are coupled back to the fiber core at the second twisted point. Experimental results show distinct sensitivities of 34.9 pm/με with 49.23 pm/℃ and -36.19 pm/με with 62.99 pm/℃ for the two selected destructive interference wavelengths.
文摘On July 14, 2000, a type IV solar radio burst was observed at 10:43-11:00 UT with the 1-2 GHz digital spectrometer of National Astronomical Observatories of China (NAOC). Many fiber fine structures superposed on the type IV burst were detected in the same interval. A theoretical interpretation for the fibers is performed based upon a model of magnetic-mirror loop configuration in the solar corona. In this model, the source of the fiber emission is considered as the ducting of whistler solitons within the magnetic-mirror loop. A quantitative estimation using the observed data indicats that the magnetic field strength of the radio source is about 1.451×10 -2≤B 0≤2.734×10 -2 T, and that a fiber is composed of 4×10 15 solitons occupying a volume of about 1.2×108 km3. For the duct through which the whistler solitons passed within the magnetic-mirror loop, its diameter and the length are worked out, namely, d≈120 km and Δr≈104 km, respectively.
文摘The regenerated cellulose fibers, made from wood pulp, have excellent physical properties like cotton fiber. Especially polynosic fibers can be mercerized by alkali, but conventional Viscose fiber can not be treated or mercerized by alkali. The paper studies on behavior of polynosic fibers treated by alkali, including physical properties, such as weight loss, tensile strength and elongation, and fiber structures properties. In this paper, on the basis of study on polynosic fibers treated by alkali, the conclusions were drawn as following. Firstly, polynosic fiber is good at alkali resistance. Secondly, the changes of fiber structure and physical properties begin declining at 5 wt% NaOH concentration and reverse changes take place at 10 wt%.
基金financial support for this research was provided by the Program (Grants 11372060, 91216201) of the National Natural Science Foundation of ChinaProgram (LJQ2015026 ) for Excellent Talents at Colleges and Universities in Liaoning Province+3 种基金the Major National Science and Technology Project (2011ZX02403-002)111 project (B14013)Fundamental Research Funds for the Central Universities (DUT14LK30)the China Scholarship Fund
文摘This paper deals with the concurrent multi-scale optimization design of frame structure composed of glass or carbon fiber reinforced polymer laminates. In the composite frame structure, the fiber winding angle at the micro-material scale and the geometrical parameter of components of the frame in the macro-structural scale are introduced as the independent variables on the two geometrical scales. Considering manufacturing requirements, discrete fiber winding angles are specified for the micro design variable. The improved Heaviside penalization discrete material optimization interpolation scheme has been applied to achieve the discrete optimization design of the fiber winding angle. An optimization model based on the minimum structural compliance and the specified fiber material volume constraint has been established. The sensitivity information about the two geometrical scales design variables are also deduced considering the characteristics of discrete fiber winding angles. The optimization results of the fiber winding angle or the macro structural topology on the two single geometrical scales, together with the concurrent two-scale optimization, is separately studied and compared in the paper. Numerical examples in the paper show that the concurrent multi-scale optimization can further explore the coupling effect between the macro-structure and micro-material of the composite to achieve an ultralight design of the composite frame structure. The novel two geometrical scales optimization model provides a new opportunity for the design of composite structure in aerospace and other industries.
文摘Reinforced concrete(RC) load bearing wall is widely used in high-rise and mid-rise buildings. Due to the number of walls in plan and reduction in lateral force portion, this system is not only stronger against earthquakes, but also more economical. The effect of progressive collapse caused by removal of load bearing elements, in various positions in plan and stories of the RC load bearing wall system was evaluated by nonlinear dynamic and static analyses. For this purpose, three-dimensional model of 10-story structure was selected. The analysis results indicated stability, strength and stiffness of the RC load-bearing wall system against progressive collapse. It was observed that the most critical condition for removal of load bearing walls was the instantaneous removal of the surrounding walls located at the corners of the building where the sections of the load bearing elements were changed. In this case, the maximum vertical displacement was limited to 6.3 mm and the structure failed after applying the load of 10 times the axial load bored by removed elements. Comparison between the results of the nonlinear dynamic and static analyses demonstrated that the "load factor" parameter was a reasonable criterion to evaluate the progressive collapse potential of the structure.
基金supported by the National Natural Science Foundation of China(Grant Nos.12020101001,12021002,12372324,and 12272239)supported by the National Innovation and Entrepreneurship Training Program for College Students(No.202210056136).
文摘The multi-layer cylindrical helicoidal fiber structure(MCHFS)exists widely in biological materials such as bone and wood at the microscale.MCHFSs typically function as reinforcing elements to enhance the toughness of materials.In this study,we establish a shear lag-based pullout model of the cylindrical helicoidal fiber(CHF)for investigating interlayer stress transfer and debonding behaviors,with implications regarding the underlying toughening mechanism of MCHFS.Based on the shear lag assumptions,analytical solutions for the stress and displacement fields of the MCHFS during the pullout are derived by considering the CHF as a cylindrically monoclinic material and verified through the 3D finite element simulation.It is found that the helical winding of CHF results in both axial and hoop interlayer shear stresses.Both the helical winding angle and the elastic moduli of the fiber and matrix have significant influences on interlayer stress transfer.This work reveals a new interlayer stress transfer mechanism in the MCHFS existing widely in biological materials.
基金support of the National Natural Science Foundation of China(No.51901174)the 111 Project 2.0 of China(BP2018008)the China Postdoctoral Science Foun-dation(No.2020M673383).
文摘Here we reported a heterogeneous fiberous structured Mg-5.6Zn-0.6Zr(wt%)alloy obtained by conventional extrusion method,which exhibited high yield strength of∼345 MPa,ultimate tensile strength of∼370 MPa,and high tensile strain of∼20.5%,superior to most of the Mg-Zn based alloys reported so far.The extraordinarily high mechanical properties were mainly attributed to the heterogeneous fiberous structure consisting of alternating coarse-and fine-grain layers.Grains in the different layers grew into the neighboring layers,ensuring a good layer bonding.A high Schmid factor and geometric compatibility factor for pyramidal slip led to full slip transfer between the neighboring coarse grains and fine grains,which could help to release the stress concentration and avoid early fracture.The profuse acti-vated<c+a>glide dislocations could render the unprecedented high tensile strain.The constraint by the hard fine-grain domains made the soft coarse-grain domains strong like the hard fine-grain domains,as well as the nanoscale precipitates pinning dislocations,contributed to the high strength.The hetero-geneous microstructure design was shown to have synergistic improvement in strength-ductility balance,which could be an inspiring strategy to improve mechanical properties of hexagonal close-packed(hcp)metals.
文摘This paper presents a long-range displacement measurement method by using a single- multi-single mode （SMS） fiber structure, attached to a flexible plate between two permanent poles and the optical time domain reflectometer （OTDR）-based interrogator. The SMS fiber structure sensors are prepared with two different configurations, i.e. straight and sinusoidal configurations. It is demonstrated that the displacement sensor can perform a displacement measurement with a range from 0 mm to 150 mm with a resolution of 0.159 mm. The sinusoidal configuration provides a better sensitivity than the straight configuration. The proposed sensor offers a low cost, and it can be implemented for quasi-distributed displacement measurement which is suitable for civil structure monitoring.
文摘Density functional based tight binding (DFTB) model is employed to study the sp3-to-sp2 transformation of diamond-like carbon at elevated temperatures. The understanding could lead to the direct-growth of graphene on a wide variety of substrates.
基金Funded by the National Natural Science Foundation of China(No.51472092)
文摘We studied the characteristics of two-scale pore structure of preform in the deposition process and the mass transfer of reactant gas in dual-scale pores, and observed the physiochemical phenomenon associated with the reaction. Thereby, we established mathematical models on two scales, respectively, preform and reactor. These models were used for the numerical simulation of the process of ceramic matrix composites densified by isothermal chemical vapor infiltration(ICVI). The models were used to carry out a systematic study on the influence of process conditions and the preform structure on the densification behaviors. The most important findings of our study are that the processing time could be reduced by about 50% without compromising the quality of the material, if the processing temperature is 950-1 000 ℃ for the first 70 hours and then raised to 1 100 ℃.
基金the Austrian Academy of Sciences(OeAW)for funding the landslide monitoring project for several yearsthe Austrian Federal Railways(OBB)for the funding of the geogrid monitoring project,especially the participating departments of OBB-Infrastruktur AG:Tunneling,Surveying and Data Management,Research and Development
文摘High-sensitivity monitoring solutions are crucial for early warning systems of earth structures. In this paper, we discuss the design and implementation of such systems for natural and engineered slopes using two case studies. At the Gradenbach Observatory, one key element of the monitoring system is a large fiber optic strain rosette embedded in the slope. We demonstrate that the strain rosette can depict landslide deformations much earlier than geodetic sensors like GPS or total stations and is therefore well suitable for an early warning system. In a second application we report the construction of a reinforced earth structure using geogrids. A distributed fiber optic measurement system was installed to measure the current operating grade of the geogrids within the earth structure. About 2 km of Brillouin sensing cables were installed in the project area. It is demonstrated that the developed monitoring system is well suited for assessing the current state of health of reinforced earth structures.
文摘Grating writing in structured optical fibers is reviewed. Various laser sources have been used including UV and near IR nanosecond and femtosecond lasers, each enabling different material processing regimes. The issue of scattering is modeled through simulation and compared with experiment. Good agreement has been established.
基金supported by the National Key Research and Development Plan Project of China(Grant No.2018YFA0702300)the National Natural Science Foundation of China(Grant No.52227813).
文摘Electrochemical CO_(2)reduction is a sustainable approach in green chemistry that enables the production of valuable chemicals and fuels while mitigating the environmental impact associated with CO_(2)emissions.Despite its several advantages,this technology suffers from an intrinsically low CO_(2)solubility in aqueous solutions,resulting in a lower local CO_(2)concentration near the electrode,which yields lower current densities and restricts product selectivity.Gas diffusion electrodes(GDEs),particularly those with tubular architectures,can solve these issues by increasing the local CO_(2)concentration and triple-phase interface,providing abundant electroactive sites to achieve superior reaction rates.In this study,robust and self-supported Cu flow-through gas diffusion electrodes(FTGDEs)were synthesized for efficient formate production via electrochemical CO_(2)reduction.They were further compared with traditional Cu electrodes,and it was found that higher local CO_(2)concentration due to improved mass transfer,the abundant surface area available for the generation of the triple-phase interface,and the porous structure of Cu FTGDEs enabled high formate Faradaic efficiency(76%)and current density(265 mA¸cm^(−2))at–0.9 V vs.reversible hydrogen electrode(RHE)in 0.5 mol·L^(−1)KHCO3.The combined phase inversion and calcination process of the Cu FTGDEs helped maintain a stable operation for several hours.The catalytic performance of the Cu FTGDEs was further investigated in a non-gas diffusion configuration to demonstrate the impact of local gas concentration on the activity and performance of electrochemical CO_(2)reduction.This study demonstrates the potential of flow-through gas-diffusion electrodes to enhance reaction kinetics for the highly efficient and selective reduction of CO_(2),offering promising applications in sustainable electrochemical processes.
基金National Natural Science Foundation of China with Grant No.21905304Natural Science Foundation of Shandong Province(No.ZR2019BEM031)+1 种基金the Fundamental Research Funds for the Central Universities(Nos.18CX02158A,05Y18030020 and 19CX05001A)the support from the Western University-Soochow University Center for Synchrotron Radiation Research。
文摘While manganese-based cathodes have been intensively studied for zinc-ion batteries(ZIBs),the limited rate capability and cycle life have always been a difficult problem to be solved.Here,we report a mixed valent manganese oxide(MnOx)cathode with superior electrochemical performance,which exhibits a high specific capacity of 450 mA h/g at 0.2 C and a satisfactory specific capacity of 158.3 mA h/g at a high rate of 5 C.The mixed cathode system reduces the charge transfer resistance,and show good surface stability and adsorption properties,so it is beneficial for the storage of Zn^(2+).Meanwhile,coaxial fiber ZIBs(CFZIBs)with splendid flexibility are assembled utilizing the elaborately prepared cathode material.The CFZIBs achieve a reversible capacity of 255.8 m A h/g and the capacity retention rate is as high as 80%after 1000 bending deformations.This study provides new opportunities for designing ZIBs with high performance and high flexibility.
