The research progress of deep and ultra-deep drilling fluid technology systematically reviewed,the key problems existing are analyzed,and the future development direction is proposed.In view of the high temperature,hi...The research progress of deep and ultra-deep drilling fluid technology systematically reviewed,the key problems existing are analyzed,and the future development direction is proposed.In view of the high temperature,high pressure and high stress,fracture development,wellbore instability,drilling fluid lost circulation and other problems faced in the process of deep and ultra-deep complex oil and gas drilling,scholars have developed deep and ultra-deep high-temperature and high-salt resistant water-based drilling fluid technology,high-temperature resistant oil-based/synthetic drilling fluid technology,drilling fluid technology for reservoir protection and drilling fluid lost circulation control technology.However,there are still some key problems such as insufficient resistance to high temperature,high pressure and high stress,wellbore instability and serious lost circulation.Therefore,the development direction of deep and ultra-deep drilling fluid technology in the future is proposed:(1)The technology of high-temperature and high-salt resistant water-based drilling fluid should focus on improving high temperature stability,improving rheological properties,strengthening filtration control and improving compatibility with formation.(2)The technology of oil-based/synthetic drilling fluid resistant to high temperature should further study in the aspects of easily degradable environmental protection additives with low toxicity such as high temperature stabilizer,rheological regulator and related supporting technologies.(3)The drilling fluid technology for reservoir protection should be devoted to the development of new high-performance additives and materials,and further improve the real-time monitoring technology by introducing advanced sensor networks and artificial intelligence algorithms.(4)The lost circulation control of drilling fluid should pay more attention to the integration and application of intelligent technology,the research and application of high-performance plugging materials,the exploration of diversified plugging techniques and methods,and the improvement of environmental protection and production safety awareness.展开更多
This paper elaborates the chemical constituent change principles of deep geothermal fluid during the process of upward movement. It summarizes research methods of hydrochemistry, isotope and numerical modelling techni...This paper elaborates the chemical constituent change principles of deep geothermal fluid during the process of upward movement. It summarizes research methods of hydrochemistry, isotope and numerical modelling technique for the physiochemical processes such as decreasing temperature, shallow groundwater infusion, and degassing. The multi-component chemical geothermometry methods including gas geochemical method are discussed. High-temperature geothermal fields in China are mostly located in the southwest with frequent new tectonic movements, especially in Tibet high-temperature geothermal areas. Therefore the paper also focuses the status of high-temperature geothermal fluid research. At last, it's pointed out in the paper that in the future we can start from typical high-temperature geothermal zones and geothermal fields to explore optimization of the multi-component geothermometry method and use it in the reconstruction and analogue of the formation mechanism and internal relevancy of regional geothermal systems.展开更多
Metal organic chenlical vapor deposition （AIOCVD） growth systems arc one of the. main types of equipment used for growing single crystal materials, such as GaN. To obtain fihn epitaxial materials with uniform perfor...Metal organic chenlical vapor deposition （AIOCVD） growth systems arc one of the. main types of equipment used for growing single crystal materials, such as GaN. To obtain fihn epitaxial materials with uniform performanee, the flow field and ternperature field in a GaN-MOCVD reactor are investigated by modeling and simulating. To make the simulation results more consistent with the actual situation, the gases in the reactor are considered to be compressible, making it possible to investigate the distributions of gas density and pressure in the reactor. The computational fluid dynamics method is used to stud,v the effects of inlet gas flow velocity, pressure in the reactor, rotational speed of graphite susceptor, and gases used in the growth, which has great guiding~ significance for the growth of GaN fihn materials.展开更多
To study various properties of a gas has been a subject of rational curiosity in pneumatic sciences. A gaseous system, in general, is studied by using four measurable parameters namely, the pressure, volume, number of...To study various properties of a gas has been a subject of rational curiosity in pneumatic sciences. A gaseous system, in general, is studied by using four measurable parameters namely, the pressure, volume, number of moles and temperature. In the present work, an attempt is made to study the variation of energy of an ideal gas with the two measurable parameters, the mass and temperature of the gas. Using the well known ideal gas equation, PV = nRT where symbols have their usual meanings and some simple mathematical operations widely used in physics, chemistry and mathematics in a transparent manner, an equation of state relating the three variables, the energy, mass and temperature of an ideal gas is obtained. It is found that energy of an ideal gas is equal to the product of mass and temperature of the gas. This gives a direct relationship between the energy, mass and temperature of the gas. Out of the three variables, the energy, mass and temperature of an ideal gas, if one of the parameters is held constant, the other two variables can be measured. At a constant temperature, when the power or energy is stabilized, the increase in the mass of the gas may affect the new works and an engine can therefore be prevented from overheating.展开更多
In this paper,statistics are taken on the co-seismic response of underground fluid in Yunnan to the Nepal M_S8. 1 earthquake,and the co-seismic response characteristics of the water level and water temperature are ana...In this paper,statistics are taken on the co-seismic response of underground fluid in Yunnan to the Nepal M_S8. 1 earthquake,and the co-seismic response characteristics of the water level and water temperature are analyzed and summarized with the digital data. The results show that the Nepal M_S8. 1 earthquake had greater impact on the Yunnan region,and the macro and micro dynamics of fluids showed significant co-seismic response. The earthquake recording capacity of water level and temperature measurement is significantly higher than that of water radon and water quality to this large earthquake; the maximum amplitude and duration of co-seismic response of water level and water temperature vary greatly in different wells. The changing forms are dominated by fluctuation and step rise in water level,and a rising or falling restoration in water temperature. From the records of the main shock and the maximum strong aftershock,we can see that the greater magnitude of earthquake,the higher ratio of the occurrence of co-seismic response,and in the same well,the larger the response amplitude,as well as the longer the duration. The amplitude and duration of co-seismic response recorded by different instruments in a same well are different. Water temperature co-seismic response almost occurred in wells with water level response,indicating that the well water level and water temperature are closely related in co-seismic response,and the well water temperature seismic response was caused mainly by well water level seismic response.展开更多
In this paper, an energy system consisting of solar collector, biogas dry reforming reactor and solid oxide fuel cell (SOFC) has been proposed. The heat produced from the concentrating solar collector is used to drive...In this paper, an energy system consisting of solar collector, biogas dry reforming reactor and solid oxide fuel cell (SOFC) has been proposed. The heat produced from the concentrating solar collector is used to drive a biogas dry reforming reactor in order to produce H<sub>2</sub> as a fuel for SOFC, in such as system. The aim of this study is to clarify the impact of climate data on the performance of solar collector with various sizes/designs. The temperature of heat transfer fluid produced by the solar collector is calculated by adopting the climate data for Nagoya city in Japan in 2021. The amount of H<sub>2</sub> produced from the biogas dry reforming reactor and the power generated by SOFC were simulated. The results show the temperature of heat transfer fluid (T<sub>fb</sub>) and T<sub>fb</sub> ratio (a) based on the length of absorber (dx) = 1 m have a peak near the noon following the trend of solar intensity (I). Results also revealed that a increases with increase in dx. It is found that the differences of T<sub>fb</sub> and a between dx = 2 m and dx = 3 m are larger than those between dx = 1 m and dx = 2 m. It is revealed that T<sub>fb</sub> and a are higher in spring and summer. dx = 4 m is the optimum length of solar absorber. The amount of H<sub>2</sub> produced from the biogas dry reforming reactor as well as the power generated by SOFC is the highest in August, resulting that it is prefer to produce H<sub>2</sub> and to generate SOFC in summer.展开更多
The present study aims at investigating the effect of temperature variation due to heat transfer between the formation and drilling fluids considering influx from the reservoir in the underbalanced drilling condition....The present study aims at investigating the effect of temperature variation due to heat transfer between the formation and drilling fluids considering influx from the reservoir in the underbalanced drilling condition. Gas-liquid-solid three-phase flow model considering transient thermal interaction with the formation was applied to simulate wellbore fluid to calculate the wellbore temperature and pressure and analyze the influence of different parameters on fluid pressure and temperature distribution in annulus. The results show that the non-isothermal three-phase flow model with thermal consideration gives more accurate prediction of bottom-hole pressure(BHP) compared to other models considering geothermal temperature. Viscous dissipation, the heat produced by friction between the rotating drilling-string and well wall and drill bit drilling, and influx of oil and gas from reservoir have significant impact on the distribution of fluid temperature in the wellbore, which in turn affects the BHP. Bottom-hole fluid temperature decreases with increasing liquid flow rate, circulation time, and specific heat of liquid and gas but it increases with increasing in gas flow rate. It was found that BHP is strongly depended on the gas and liquid flow rates but it has weak dependence on the circulation time and specific heat of liquid and gas. BHP increase with increasing liquid flow rate and decreases with increasing gas flow rate.展开更多
This paper examines the thermal performance of working fluids in the entire evaporation temperature region up to near-critical temperature of working fluids in the organic Rankine cycle(ORC).The variation and tendency...This paper examines the thermal performance of working fluids in the entire evaporation temperature region up to near-critical temperature of working fluids in the organic Rankine cycle(ORC).The variation and tendency of the net power output with water temperature and correlated with the critical temperature of working fluids is investigated.Four characteristic curves of the net power output at particular water temperature(Tw_turn,Tw_app,Tw_tran and Tw_up)and their temperature difference(△T_turn=Tw_turn△Tcr,△T_app=Tw_app△Tcr)are obtained to evaluate the working fluids.The curve at"applicable water temperature(Tw_app)"is a demarcation to differentiate the net power output from low to high.The"upper water temperature(Tw_up)"is an upper limit of the water temperature to yield the higher net power output.A relation is built that the suitable water temperature is within the Tw_app and Tw_up of the working fluid.展开更多
To maintain gas hydrate stability, low-temperature drilling fluids and high drilling speeds should be used while drilling in gas hydrate-bearing sediments. The effect of the drilling fluid on downhole rock surfaces at...To maintain gas hydrate stability, low-temperature drilling fluids and high drilling speeds should be used while drilling in gas hydrate-bearing sediments. The effect of the drilling fluid on downhole rock surfaces at low temperatures is very important to increase the drilling rate. This paper analyzed the action mechanism of the drilling fluid on downhole rock surfaces and established a corresponding evaluation method. The softening effect of six simulated drilling fluids with 0.1 wt.% of four common surfactants and two common organic salts on the downhole rock surface strength was evaluated experimentally using the established method at low temperature. The experimental results showed that the surfactants and organic salts used in the drilling fluids aided in the reduction of the strength of the downhole rock surface, and the established evaluation method was able to quantitatively reveal the difference in the softening effect of the different drilling fluids through comparison with water. In particular, the most common surfactant that is used in drilling fluids, sodium dodecyl sulfate（SDS）, had a very good softening effect while drilling under low-temperature conditions, which can be widely applied during drilling in low-temperature formations, such as natural gas hydrate-bearing sediments, the deep seafloor and permafrost.展开更多
In this article,natural convection of a temperature-sensitive magnetic fluid in a porous media is studied numerically by using lattice Boltzmann method.Results show that the heat transfer decreases when the ball numbe...In this article,natural convection of a temperature-sensitive magnetic fluid in a porous media is studied numerically by using lattice Boltzmann method.Results show that the heat transfer decreases when the ball numbers increase.When the magnetic field is increased,the heat transfer is enhanced;however the average wall Nusselt number increases at small ball numbers but decreases at large ball numbers due to the induced flow being more likely confined near the bottom walls with a high number of obstacles.展开更多
Neglecting the consumption of the material, a steady incompressible flow of an exothermic reacting third-grade fluid with viscous heating in a circular cylindrical pipe is numerically studied for both cases of constan...Neglecting the consumption of the material, a steady incompressible flow of an exothermic reacting third-grade fluid with viscous heating in a circular cylindrical pipe is numerically studied for both cases of constant viscosity and Reynolds＇ viscosity model. The coupled ordinary differential equations governing the flow in cylindrical coordinates, are transformed into dimensionless forms using appropriate transformations, and then solved numerically. Solutions using Maple are presented in tabular form and given in terms of dimensionless central fluid velocity and temperature, skin friction and heat transfer rate for three parametric values in the Reynolds＇ case. The numerical results for the velocity and temperature fields are also presented through graphs. Bifurcations are discussed using shooting method. Comparisons are also made between the present results and those of previous work, and thus verify the validity of the provided numerical solutions. Important properties of thermal criticality are provided for variable viscosity parameter and reaction order. Further numerical results are presented in the form of tables and graphs for transition of physical parameters, while varying certain flow and fluid material parameters. Also, the flow behaviour of the reactive fluid of third-grade is compared with those of the Newtonian reactive fluid.展开更多
Hemispherical shell resonator(HSR)is the core component of hemispherical resonator gyro.It is aφ-shaped small-bore complex component with minimum curvature radius less than 3 mm.Thus,traditional polishing methods are...Hemispherical shell resonator(HSR)is the core component of hemispherical resonator gyro.It is aφ-shaped small-bore complex component with minimum curvature radius less than 3 mm.Thus,traditional polishing methods are difficult to polish it.Small ball-end magnetorheological polishing method can polish the small components with complicated three-dimensional surface and obtain non-destructive surface.Therefore,this method is suitable for polishing HSR.However,the material removal rate of the ordinary small ball-end magnetorheological polishing is low,leading to long polishing time and low output of HSR.To solve this problem,a water bath heating assisted small ball-end magnetorheological polishing method is proposed in this research.The influence rule of processing parameters on the material removal rate is studied experimentally.A set of optimal processing parameters is obtained to maximize the material removal rate.Compared with the ordinary method,the material removal rate of the new method can be improved by 143%.Subsequently,an HSR is polished by the new method.The results show that the polishing time can be reduced by 55%,and the polished surface roughness can reach 7.7 nm.The new method has the great potential to be used in actual production to improve the polishing efficiency of HSR.展开更多
基金Supported by the Projects of National Natural Science Foundation of China(52288101,52174014,52374023)。
文摘The research progress of deep and ultra-deep drilling fluid technology systematically reviewed,the key problems existing are analyzed,and the future development direction is proposed.In view of the high temperature,high pressure and high stress,fracture development,wellbore instability,drilling fluid lost circulation and other problems faced in the process of deep and ultra-deep complex oil and gas drilling,scholars have developed deep and ultra-deep high-temperature and high-salt resistant water-based drilling fluid technology,high-temperature resistant oil-based/synthetic drilling fluid technology,drilling fluid technology for reservoir protection and drilling fluid lost circulation control technology.However,there are still some key problems such as insufficient resistance to high temperature,high pressure and high stress,wellbore instability and serious lost circulation.Therefore,the development direction of deep and ultra-deep drilling fluid technology in the future is proposed:(1)The technology of high-temperature and high-salt resistant water-based drilling fluid should focus on improving high temperature stability,improving rheological properties,strengthening filtration control and improving compatibility with formation.(2)The technology of oil-based/synthetic drilling fluid resistant to high temperature should further study in the aspects of easily degradable environmental protection additives with low toxicity such as high temperature stabilizer,rheological regulator and related supporting technologies.(3)The drilling fluid technology for reservoir protection should be devoted to the development of new high-performance additives and materials,and further improve the real-time monitoring technology by introducing advanced sensor networks and artificial intelligence algorithms.(4)The lost circulation control of drilling fluid should pay more attention to the integration and application of intelligent technology,the research and application of high-performance plugging materials,the exploration of diversified plugging techniques and methods,and the improvement of environmental protection and production safety awareness.
基金supported by the Chinese Academy of Geological Sciences Fund (No.YK201611)the Chinese Academy of Geological Sciences Hydrogeological Environment Geology Institute Fund (No. SK201408)
文摘This paper elaborates the chemical constituent change principles of deep geothermal fluid during the process of upward movement. It summarizes research methods of hydrochemistry, isotope and numerical modelling technique for the physiochemical processes such as decreasing temperature, shallow groundwater infusion, and degassing. The multi-component chemical geothermometry methods including gas geochemical method are discussed. High-temperature geothermal fields in China are mostly located in the southwest with frequent new tectonic movements, especially in Tibet high-temperature geothermal areas. Therefore the paper also focuses the status of high-temperature geothermal fluid research. At last, it's pointed out in the paper that in the future we can start from typical high-temperature geothermal zones and geothermal fields to explore optimization of the multi-component geothermometry method and use it in the reconstruction and analogue of the formation mechanism and internal relevancy of regional geothermal systems.
基金Supported by the National Key R&D Program of China under Grant No 2016YFB0400104
文摘Metal organic chenlical vapor deposition （AIOCVD） growth systems arc one of the. main types of equipment used for growing single crystal materials, such as GaN. To obtain fihn epitaxial materials with uniform performanee, the flow field and ternperature field in a GaN-MOCVD reactor are investigated by modeling and simulating. To make the simulation results more consistent with the actual situation, the gases in the reactor are considered to be compressible, making it possible to investigate the distributions of gas density and pressure in the reactor. The computational fluid dynamics method is used to stud,v the effects of inlet gas flow velocity, pressure in the reactor, rotational speed of graphite susceptor, and gases used in the growth, which has great guiding~ significance for the growth of GaN fihn materials.
文摘To study various properties of a gas has been a subject of rational curiosity in pneumatic sciences. A gaseous system, in general, is studied by using four measurable parameters namely, the pressure, volume, number of moles and temperature. In the present work, an attempt is made to study the variation of energy of an ideal gas with the two measurable parameters, the mass and temperature of the gas. Using the well known ideal gas equation, PV = nRT where symbols have their usual meanings and some simple mathematical operations widely used in physics, chemistry and mathematics in a transparent manner, an equation of state relating the three variables, the energy, mass and temperature of an ideal gas is obtained. It is found that energy of an ideal gas is equal to the product of mass and temperature of the gas. This gives a direct relationship between the energy, mass and temperature of the gas. Out of the three variables, the energy, mass and temperature of an ideal gas, if one of the parameters is held constant, the other two variables can be measured. At a constant temperature, when the power or energy is stabilized, the increase in the mass of the gas may affect the new works and an engine can therefore be prevented from overheating.
基金sponsored by the special fund of“A Study on Short-term Seismic Tracking of Strong Earthquakes in the Yunnan Area”of the“Ten Key Projects”in Yunnan Provincethe 2016 Earthquake Trend Tracking Task of China Earthquake Administration(2016010305)the 2015 Earthquake Trend Tracking Task of Earthquake Administration of Yunnan Province
文摘In this paper,statistics are taken on the co-seismic response of underground fluid in Yunnan to the Nepal M_S8. 1 earthquake,and the co-seismic response characteristics of the water level and water temperature are analyzed and summarized with the digital data. The results show that the Nepal M_S8. 1 earthquake had greater impact on the Yunnan region,and the macro and micro dynamics of fluids showed significant co-seismic response. The earthquake recording capacity of water level and temperature measurement is significantly higher than that of water radon and water quality to this large earthquake; the maximum amplitude and duration of co-seismic response of water level and water temperature vary greatly in different wells. The changing forms are dominated by fluctuation and step rise in water level,and a rising or falling restoration in water temperature. From the records of the main shock and the maximum strong aftershock,we can see that the greater magnitude of earthquake,the higher ratio of the occurrence of co-seismic response,and in the same well,the larger the response amplitude,as well as the longer the duration. The amplitude and duration of co-seismic response recorded by different instruments in a same well are different. Water temperature co-seismic response almost occurred in wells with water level response,indicating that the well water level and water temperature are closely related in co-seismic response,and the well water temperature seismic response was caused mainly by well water level seismic response.
文摘In this paper, an energy system consisting of solar collector, biogas dry reforming reactor and solid oxide fuel cell (SOFC) has been proposed. The heat produced from the concentrating solar collector is used to drive a biogas dry reforming reactor in order to produce H<sub>2</sub> as a fuel for SOFC, in such as system. The aim of this study is to clarify the impact of climate data on the performance of solar collector with various sizes/designs. The temperature of heat transfer fluid produced by the solar collector is calculated by adopting the climate data for Nagoya city in Japan in 2021. The amount of H<sub>2</sub> produced from the biogas dry reforming reactor and the power generated by SOFC were simulated. The results show the temperature of heat transfer fluid (T<sub>fb</sub>) and T<sub>fb</sub> ratio (a) based on the length of absorber (dx) = 1 m have a peak near the noon following the trend of solar intensity (I). Results also revealed that a increases with increase in dx. It is found that the differences of T<sub>fb</sub> and a between dx = 2 m and dx = 3 m are larger than those between dx = 1 m and dx = 2 m. It is revealed that T<sub>fb</sub> and a are higher in spring and summer. dx = 4 m is the optimum length of solar absorber. The amount of H<sub>2</sub> produced from the biogas dry reforming reactor as well as the power generated by SOFC is the highest in August, resulting that it is prefer to produce H<sub>2</sub> and to generate SOFC in summer.
文摘The present study aims at investigating the effect of temperature variation due to heat transfer between the formation and drilling fluids considering influx from the reservoir in the underbalanced drilling condition. Gas-liquid-solid three-phase flow model considering transient thermal interaction with the formation was applied to simulate wellbore fluid to calculate the wellbore temperature and pressure and analyze the influence of different parameters on fluid pressure and temperature distribution in annulus. The results show that the non-isothermal three-phase flow model with thermal consideration gives more accurate prediction of bottom-hole pressure(BHP) compared to other models considering geothermal temperature. Viscous dissipation, the heat produced by friction between the rotating drilling-string and well wall and drill bit drilling, and influx of oil and gas from reservoir have significant impact on the distribution of fluid temperature in the wellbore, which in turn affects the BHP. Bottom-hole fluid temperature decreases with increasing liquid flow rate, circulation time, and specific heat of liquid and gas but it increases with increasing in gas flow rate. It was found that BHP is strongly depended on the gas and liquid flow rates but it has weak dependence on the circulation time and specific heat of liquid and gas. BHP increase with increasing liquid flow rate and decreases with increasing gas flow rate.
基金supported by the National Natural Science Foundation of China(Grant No.51276122)
文摘This paper examines the thermal performance of working fluids in the entire evaporation temperature region up to near-critical temperature of working fluids in the organic Rankine cycle(ORC).The variation and tendency of the net power output with water temperature and correlated with the critical temperature of working fluids is investigated.Four characteristic curves of the net power output at particular water temperature(Tw_turn,Tw_app,Tw_tran and Tw_up)and their temperature difference(△T_turn=Tw_turn△Tcr,△T_app=Tw_app△Tcr)are obtained to evaluate the working fluids.The curve at"applicable water temperature(Tw_app)"is a demarcation to differentiate the net power output from low to high.The"upper water temperature(Tw_up)"is an upper limit of the water temperature to yield the higher net power output.A relation is built that the suitable water temperature is within the Tw_app and Tw_up of the working fluid.
基金supported by the National Natural Science Foundation of China(Nos.41502346,51274177)the Fundamental Research Funds for the Central Universities(No.CUGL140819)+2 种基金the Open Research Fund Program of Key Laboratory of Metallogenic Prediction of Nonferrous Metals and Geological Environment Monitoring(Central South University)Ministry of Education(Nos.2016YSJS005,2016YSJS011)the Open Research Fund Program of Key Lab of Drilling and Exploitation Technology in Complex Conditions(Jilin University)(No.DET201610)
文摘To maintain gas hydrate stability, low-temperature drilling fluids and high drilling speeds should be used while drilling in gas hydrate-bearing sediments. The effect of the drilling fluid on downhole rock surfaces at low temperatures is very important to increase the drilling rate. This paper analyzed the action mechanism of the drilling fluid on downhole rock surfaces and established a corresponding evaluation method. The softening effect of six simulated drilling fluids with 0.1 wt.% of four common surfactants and two common organic salts on the downhole rock surface strength was evaluated experimentally using the established method at low temperature. The experimental results showed that the surfactants and organic salts used in the drilling fluids aided in the reduction of the strength of the downhole rock surface, and the established evaluation method was able to quantitatively reveal the difference in the softening effect of the different drilling fluids through comparison with water. In particular, the most common surfactant that is used in drilling fluids, sodium dodecyl sulfate（SDS）, had a very good softening effect while drilling under low-temperature conditions, which can be widely applied during drilling in low-temperature formations, such as natural gas hydrate-bearing sediments, the deep seafloor and permafrost.
基金This work was supported by a grant-in-aid for Scientific Research(C)from the Ministry of Education,Culture,Sports,Science and Technology,Japan。
文摘In this article,natural convection of a temperature-sensitive magnetic fluid in a porous media is studied numerically by using lattice Boltzmann method.Results show that the heat transfer decreases when the ball numbers increase.When the magnetic field is increased,the heat transfer is enhanced;however the average wall Nusselt number increases at small ball numbers but decreases at large ball numbers due to the induced flow being more likely confined near the bottom walls with a high number of obstacles.
基金supported by Pastor E. A. Adeboye endowed Professorial Chair and conducted at the Department of Mathematics, University of Lagos, Lagos, Nigeria while on leave from
文摘Neglecting the consumption of the material, a steady incompressible flow of an exothermic reacting third-grade fluid with viscous heating in a circular cylindrical pipe is numerically studied for both cases of constant viscosity and Reynolds＇ viscosity model. The coupled ordinary differential equations governing the flow in cylindrical coordinates, are transformed into dimensionless forms using appropriate transformations, and then solved numerically. Solutions using Maple are presented in tabular form and given in terms of dimensionless central fluid velocity and temperature, skin friction and heat transfer rate for three parametric values in the Reynolds＇ case. The numerical results for the velocity and temperature fields are also presented through graphs. Bifurcations are discussed using shooting method. Comparisons are also made between the present results and those of previous work, and thus verify the validity of the provided numerical solutions. Important properties of thermal criticality are provided for variable viscosity parameter and reaction order. Further numerical results are presented in the form of tables and graphs for transition of physical parameters, while varying certain flow and fluid material parameters. Also, the flow behaviour of the reactive fluid of third-grade is compared with those of the Newtonian reactive fluid.
基金supported by the National Key Research and Development Program of China(No.2022YFB3403600)the National Natural Science Foundation of China(No.52293403)Self-Planned Task of State Key Laboratory of Robotics and System(HIT)(No.SKLRS202204C)。
文摘Hemispherical shell resonator(HSR)is the core component of hemispherical resonator gyro.It is aφ-shaped small-bore complex component with minimum curvature radius less than 3 mm.Thus,traditional polishing methods are difficult to polish it.Small ball-end magnetorheological polishing method can polish the small components with complicated three-dimensional surface and obtain non-destructive surface.Therefore,this method is suitable for polishing HSR.However,the material removal rate of the ordinary small ball-end magnetorheological polishing is low,leading to long polishing time and low output of HSR.To solve this problem,a water bath heating assisted small ball-end magnetorheological polishing method is proposed in this research.The influence rule of processing parameters on the material removal rate is studied experimentally.A set of optimal processing parameters is obtained to maximize the material removal rate.Compared with the ordinary method,the material removal rate of the new method can be improved by 143%.Subsequently,an HSR is polished by the new method.The results show that the polishing time can be reduced by 55%,and the polished surface roughness can reach 7.7 nm.The new method has the great potential to be used in actual production to improve the polishing efficiency of HSR.
