This work evaluated the effect of secondary bacterial metabolites produced by Pseudomonas sp LV strain in control of Lactobacillus sp. population in the microcosm of the vat during ethanol fermentation. The fraction F...This work evaluated the effect of secondary bacterial metabolites produced by Pseudomonas sp LV strain in control of Lactobacillus sp. population in the microcosm of the vat during ethanol fermentation. The fraction F4 produced by Pseudomonas aeruginosa was extracted with dichloromethane and fractionating by vacuum liquid chromatography obtained in a methanol phase. The evaluation of antibiotic activity of F4 fraction mixed or not with sulphuric acid and Kamoram?. The antibiotic activity of F4 fraction was determined as well as the fermentation efficiency. Also was determined yeast cell viability, budding formation, the viability of budding cells, and number of populations of Saccharomyces cerevisiae and Lactobacillus sp. The results showed that the F4 fraction had high selective antibiotic activity against Lactobacillus sp. but not for S. cerevisae, and no inhibitory effect was observed in the fermentation process by yeast. Also F4 fraction decreased flocculation and foam formation. The F4 has an antibiotic activity against Lactobacillus sp. and should be used as an alternative to control bacteria contamination and foam and flocculation formation in the fuel ethanol fermentation process. The F4 fraction could reduce the use of antibiotics in the control of Lactobacillus sp. population during the fuel ethanol production.展开更多
Dry land crops such as sorghums （grain sorghum, promising feedstocks for fuel ethanol production. The major issue sweet sorghum and forage sorghum） have been identified as for using the sweet sorghum as feedstock is...Dry land crops such as sorghums （grain sorghum, promising feedstocks for fuel ethanol production. The major issue sweet sorghum and forage sorghum） have been identified as for using the sweet sorghum as feedstock is its stability at room temperature. At room temperature, the sweet sorghum juice could lose from 40% to 50% of its fermentable sugars from 7 to 14 days No significant sugar content and profile changes were observed in juice stored at refrigerator temperature in two weeks. Ethanol fermentation efficiencies of fresh and frozen juice were high （-93%）. Concentrated juice （≥25% sugar） had significantly lower efficiencies and large amounts of fructose left in finished beer; however, winery yeast strains and novel fermentation techniques may solve these problems. The ethanol yield from sorghum grain increased as starch content increased. No linear relationship between starch content and fermentation efficiency was found. Key factors affecting the ethanol fermentation efficiency of sorghum include starches and protein digestibility, amylose-lipid complexes, tannin content, and mash viscosity. Life cycle analysis showed a positive net energy value （NEV） = 25 500 Btu/gal ethanol. Fourier transform infrared （FTIR） spectroscopy and X-ray diffraction （XRD） were used to determine changes in the structure and chemical composition of sorghum biomasses. Dilute sulfuric acid pretreatment was effective in removing the hemicellulose from biomasses and exposing the cellulose for enzymatic hydrolysis. Forage sorghum lignin had a lower syringyl/guaiacyl ratio and its pretreated biomass was easier to hydrolyze. Up to 72% hexose yield and 94% pentose yield were obtained by using a modified steam explosion with 2% sulfuric acid at 140℃ for 30 min and enzymatic hydrolysis with cellulase.展开更多
The Chinese government is developing biomass ethanol as one of its automobile fuels for energy security and environmental improvement reasons. The energy efficiency of the biomass-based fuel ethanol is critical issue....The Chinese government is developing biomass ethanol as one of its automobile fuels for energy security and environmental improvement reasons. The energy efficiency of the biomass-based fuel ethanol is critical issue. To investigate the energy use in the three biomass-base ethanol fuel systems, energy content approach, Market value approach and Product displacement approach methods were used to allocate the energy use based on life cycle energy assessment. The results shows that the net energy of corn based, wheat based, and cassava-based ethanol fuel are 12543MJ, 10299MJ and 13112MJ when get one ton biomassbased ethanol, respectively, and they do produce positive net energy.展开更多
Hainan Yedao (Group) Co. Ltd. plans to invest 350 million Yuan in construction of a fuel ethanol project. With cooperation of a large state-owned petrochemical enter- prise, this project is planned to produce 100 thou...Hainan Yedao (Group) Co. Ltd. plans to invest 350 million Yuan in construction of a fuel ethanol project. With cooperation of a large state-owned petrochemical enter- prise, this project is planned to produce 100 thousand展开更多
Models for hydrolysis,fermentation and concentration process,production and utilization of biogas as well as lignin gasification are developed to calculate the heat demand of ethanol production process and the amounts...Models for hydrolysis,fermentation and concentration process,production and utilization of biogas as well as lignin gasification are developed to calculate the heat demand of ethanol production process and the amounts of heat and power generated from residues and wastewater of the process.For the energy analysis,all relevant information about the process streams,physical properties,and mass and energy balances are considered.Energy integration is investigated for establishing a network of facilities for heat and power generation from wastewater and residues treatment aiming at the increase of energy efficiency.Feeding the lignin to an IGCC process,the electric efficiency is increased by 4.4% compared with combustion,which leads to an overall energy efficiency of 53.8%.A detailed sensitivity analysis on energy efficiency is also carried out.展开更多
Over the last decade, the uptake rate of first-generation biofuels (ethanol and biodiesel) has decelerated as low blend limits have increased only slowly and extreme volatility in oil prices has limited investment in ...Over the last decade, the uptake rate of first-generation biofuels (ethanol and biodiesel) has decelerated as low blend limits have increased only slowly and extreme volatility in oil prices has limited investment in biofuels production infrastructure. Concerns over the environmental impacts of large-scale biofuels production combined with tariff barriers have greatly restricted the global trade in biofuels. First-generation biofuels produced either by fermentation of sugars from maize or sugarcane (ethanol) or transesterification of triglycerides (biodiesel) presently contribute less than 4% of terrestrial transportation fuel demand and techno-economic modelling foresees this only slowly increasing by 2035. With internal combustion and diesel engines widely anticipated as being phased out in favour of electric power for motor vehicles, a much-reduced market demand for biofuels is likely if global demand for all liquid fuels declines by 2050. However, second-generation, thermochemically produced and biomass-derived fuels (renewable diesel, marine oils and sustainable aviation fuel) have much higher blend limits;combined with policies to decarbonise the aviation and marine industries, major new markets for these products in terrestrial, marine and aviation sectors may emerge in the second half of the 21st century.展开更多
Three co-impregnation/chemical reduction methods in acidic solutions of pH 〈 1,including ethylene glycol （EG）,NaBH4,and HCOOH,were compared for Pt-WO3/C catalysts.Pt-WO3/C catalysts containing 10 wt.% and 20 wt.% p...Three co-impregnation/chemical reduction methods in acidic solutions of pH 〈 1,including ethylene glycol （EG）,NaBH4,and HCOOH,were compared for Pt-WO3/C catalysts.Pt-WO3/C catalysts containing 10 wt.% and 20 wt.% platinum per carbon were prepared by the three methods; their morphology and electrocatalytic activities were characterized.The 20 wt.% Pt-WO3/C catalyst prepared by the co-impregnation/EG method presented the optimal dispersion with an average particle size of 4.6 nm and subsequently the best electrocatalytic activity,and so,it was further characterized.Its anodic peak current density for ethanol oxidation from linear sweep voltammetry （LSV） is 7.9 mA·cm^-2,which is 1.4 and 5.2 times as high as those of the catalysts prepared by co-impregnation/NaBH4 and co-impregnation/ HCOOH reduction methods,2.1 times as high as that of the 10 wt.% Pt-WO3/C catalyst prepared by co-impregnation/EG method,respectively.展开更多
To enhance the CO-tolerance performance of anode catalysts for direct ethanol fuel cells,carbon nanotubes were modified by titanium dioxide （donated as CNTs@TiO2） and subsequently served as the support for the prepa...To enhance the CO-tolerance performance of anode catalysts for direct ethanol fuel cells,carbon nanotubes were modified by titanium dioxide （donated as CNTs@TiO2） and subsequently served as the support for the preparation of Pt/CNTs@TiO2 and Pt-Mo/CNTs@TiO2 electrocatalysts via a UV-photoreduction method.The physicochemical characterizations of the catalysts were carried out by using X-ray diffraction （XRD）,transmission electron microscopy （TEM）,X-ray photoelectron spectroscopy （XPS）,and infrared spectroscopy of adsorbed probe ammonia molecules.The electrocatalytic properties of the catalysts for methanol oxidation were investigated by the cyclic voltammetry technique.The results show that Pt-Mo/CNTs@TiO2 electrode exhibits the highest performance in all the electrodes.It is explained that,the structure,the oxidation states,and the acid-base properties of the catalysts are influenced due to the strong interaction between Ti and Mo species by adding TiO2 and MoOx to the Pt-based catalysts.展开更多
The preparation of ethanol-diesel fuel blends and their emission characteristics were investigated. Results showed the absolute ethanol can dissolve in diesel fuel at an arbitrary ratio and a small quantity of water(0...The preparation of ethanol-diesel fuel blends and their emission characteristics were investigated. Results showed the absolute ethanol can dissolve in diesel fuel at an arbitrary ratio and a small quantity of water(0.2%) addition can lead to the phase separation of blends. An organic additive was synthesized and it can develop the ability of resistance to water and maintain the stability of ethanol-diesel-trace amounts of water system. The emission characteristics of 10%, 20%, and 30% ethanol-diesel fuel blends, with or without additives, were compared with those of diesel fuel in a direct injection(DI) diesel engine. The experimental results indicated that the blend of ethanol with diesel fuel significantly reduced the concentrations of smoke, hydrocarbon(HC), and carbon monoxide(CO) in exhaust gas. Using 20% ethanol-diesel fuel blend with the additive of 2% of the total volume, the optimum mixing ratio was achieved, at which the bench diesel engine testing showed a significant decrease in exhaust gas. Bosch smoke number was reduced by 55%, HC emission by 70%, and CO emission by 45%, at 13 kW/1540 r/min. However, ethanol-diesel fuel blends produced a few ppm acetaldehydes and more ethanol in exhaust gas.展开更多
A novel routine for removing water from ethanol by the hydration using C4 olefin cut catalyzed with the ion exchange resin was proposed. Reactive distillation experiments were carried out to demonstrate the feasibilit...A novel routine for removing water from ethanol by the hydration using C4 olefin cut catalyzed with the ion exchange resin was proposed. Reactive distillation experiments were carried out to demonstrate the feasibility of this routine. The sensitivity analysis was performed by using the software of ASPEN PLUS 10.2. The optimized operating conditions were obtained considering three objective functions which were the water content of the bottom product, water conversion rate and hydration selectivity. Under the optimized operation conditions, the final product was consisted of 45.0% of ethanol, 19.4% of ethyl tert-butyl ether, 35.1% of tert-butyl alcohol and 0.6% of water in volumetric percentage.展开更多
To evaluate the environmental, economic, energy performance of biomass ethanol fuel in China and to support the decision-making of biomass ethanol energy policy, an assessment method of life cycle 3E (economy, environ...To evaluate the environmental, economic, energy performance of biomass ethanol fuel in China and to support the decision-making of biomass ethanol energy policy, an assessment method of life cycle 3E (economy, environment, energy) was applied to the three biomass ethanol fuel cycle alternatives, which includes cassava-based, corn-based and wheat-based ethanol fuel. The assessments provide a comparison of the economical performance, energy efficiency and environmental impacts of the three alternatives. And the development potential of the three alternatives in China was examined. The results are very useful for the Chinese government to make decisions on the biomass ethanol energy policy, and some advises for the decision-making of Chinese government were given.展开更多
Biomass ethanol fuel is not only renewable but also environmental-friendly. Guangxi Zhuang Autonomous Region is developing the cassava-based ethanol fuel. Economical performance of the project is the key issue. The tr...Biomass ethanol fuel is not only renewable but also environmental-friendly. Guangxi Zhuang Autonomous Region is developing the cassava-based ethanol fuel. Economical performance of the project is the key issue. The traditional life cycle economical analysis is just a static calculation process. Uncertainty is the character of cassava yield, cost of cassava plant, cassava price, tax rate and gasoline price, and the economical performance of the project is determined by these aspects. This study proposes an economical model of cassava-based ethanol fuel. The method of Monte Carol is used to simulate the economical performance. This method conquers the shortage of the traditional way. The results show that cassava-based ethanol fuel can get survived when the tax is exempted. Finally, the study also evaluates the potential of the economical performance.展开更多
The primary barrier to the use of ethanol in diesel fuel is the poor miscibility at lower temperatures. The miscibilities of ethanol in 19 diesel fuels having a wide variation in compositions were evaluated by testin...The primary barrier to the use of ethanol in diesel fuel is the poor miscibility at lower temperatures. The miscibilities of ethanol in 19 diesel fuels having a wide variation in compositions were evaluated by testing their phase separation temperatures. The result shows that aromatic contents and intermediate distillate temperatures have a significant impact on miscibility limits. The FCC diesels, which contain up to 50% of aromatics, exhibit different phase behavior trends in comparison with straight-run diesels and other diesel fuels.展开更多
Pt/Ni catalysts modified with CeO2 nanoparticles were prepared by simple composite electrodeposition of Ni and CeO2,and spontaneous Ni partial replacement by Pt processes.The as-prepared CeO2-modified Pt/Ni catalysts ...Pt/Ni catalysts modified with CeO2 nanoparticles were prepared by simple composite electrodeposition of Ni and CeO2,and spontaneous Ni partial replacement by Pt processes.The as-prepared CeO2-modified Pt/Ni catalysts showed enhanced catalytic performance for ethanol electro-oxidation compared with pure Pt/Ni,and acetate species were proposed to be the main products of the oxidation when using these catalysts.The content of CeO2 in the as-prepared catalysts influenced their catalytic activity,with Pt/NiCe2（obtained from an electrolyte containing 100 mg/L CeO2 nanoparticles） exhibiting higher activity and relatively better stability in ethanol electro-oxidation.This was mainly due to the oxygen storage capacity of CeO2,the interaction between Pt and CeO2/Ni,and the relatively small contact and charge transfer resistances.The results of this work thus suggest that electrocatalysts with low price and high activity can be rationally designed and produced by a simple route for use in direct ethanol fuel cells.展开更多
基金the National Council of Scientific and Technological Development(CNPq)who enabled the execution of this study by conceding PIBIC,MSc.,Ph.D and Productivity in research grants.
文摘This work evaluated the effect of secondary bacterial metabolites produced by Pseudomonas sp LV strain in control of Lactobacillus sp. population in the microcosm of the vat during ethanol fermentation. The fraction F4 produced by Pseudomonas aeruginosa was extracted with dichloromethane and fractionating by vacuum liquid chromatography obtained in a methanol phase. The evaluation of antibiotic activity of F4 fraction mixed or not with sulphuric acid and Kamoram?. The antibiotic activity of F4 fraction was determined as well as the fermentation efficiency. Also was determined yeast cell viability, budding formation, the viability of budding cells, and number of populations of Saccharomyces cerevisiae and Lactobacillus sp. The results showed that the F4 fraction had high selective antibiotic activity against Lactobacillus sp. but not for S. cerevisae, and no inhibitory effect was observed in the fermentation process by yeast. Also F4 fraction decreased flocculation and foam formation. The F4 has an antibiotic activity against Lactobacillus sp. and should be used as an alternative to control bacteria contamination and foam and flocculation formation in the fuel ethanol fermentation process. The F4 fraction could reduce the use of antibiotics in the control of Lactobacillus sp. population during the fuel ethanol production.
基金Supported by National Research Initiative of the USDA Cooperative State Research, Education and Extension Service (2004-35504-14808)
文摘Dry land crops such as sorghums （grain sorghum, promising feedstocks for fuel ethanol production. The major issue sweet sorghum and forage sorghum） have been identified as for using the sweet sorghum as feedstock is its stability at room temperature. At room temperature, the sweet sorghum juice could lose from 40% to 50% of its fermentable sugars from 7 to 14 days No significant sugar content and profile changes were observed in juice stored at refrigerator temperature in two weeks. Ethanol fermentation efficiencies of fresh and frozen juice were high （-93%）. Concentrated juice （≥25% sugar） had significantly lower efficiencies and large amounts of fructose left in finished beer; however, winery yeast strains and novel fermentation techniques may solve these problems. The ethanol yield from sorghum grain increased as starch content increased. No linear relationship between starch content and fermentation efficiency was found. Key factors affecting the ethanol fermentation efficiency of sorghum include starches and protein digestibility, amylose-lipid complexes, tannin content, and mash viscosity. Life cycle analysis showed a positive net energy value （NEV） = 25 500 Btu/gal ethanol. Fourier transform infrared （FTIR） spectroscopy and X-ray diffraction （XRD） were used to determine changes in the structure and chemical composition of sorghum biomasses. Dilute sulfuric acid pretreatment was effective in removing the hemicellulose from biomasses and exposing the cellulose for enzymatic hydrolysis. Forage sorghum lignin had a lower syringyl/guaiacyl ratio and its pretreated biomass was easier to hydrolyze. Up to 72% hexose yield and 94% pentose yield were obtained by using a modified steam explosion with 2% sulfuric acid at 140℃ for 30 min and enzymatic hydrolysis with cellulase.
基金This work was supported by the David and Lucie Packard Foundation in partnership with the Energy Foundation, US. Project (G - 0205 -06347)
文摘The Chinese government is developing biomass ethanol as one of its automobile fuels for energy security and environmental improvement reasons. The energy efficiency of the biomass-based fuel ethanol is critical issue. To investigate the energy use in the three biomass-base ethanol fuel systems, energy content approach, Market value approach and Product displacement approach methods were used to allocate the energy use based on life cycle energy assessment. The results shows that the net energy of corn based, wheat based, and cassava-based ethanol fuel are 12543MJ, 10299MJ and 13112MJ when get one ton biomassbased ethanol, respectively, and they do produce positive net energy.
文摘Hainan Yedao (Group) Co. Ltd. plans to invest 350 million Yuan in construction of a fuel ethanol project. With cooperation of a large state-owned petrochemical enter- prise, this project is planned to produce 100 thousand
基金Supported by National Natural Science Foundation of China (No.50506010)Chinese National High-tech R&D Program (863 Program) (No.2007AA100702-5)
文摘Models for hydrolysis,fermentation and concentration process,production and utilization of biogas as well as lignin gasification are developed to calculate the heat demand of ethanol production process and the amounts of heat and power generated from residues and wastewater of the process.For the energy analysis,all relevant information about the process streams,physical properties,and mass and energy balances are considered.Energy integration is investigated for establishing a network of facilities for heat and power generation from wastewater and residues treatment aiming at the increase of energy efficiency.Feeding the lignin to an IGCC process,the electric efficiency is increased by 4.4% compared with combustion,which leads to an overall energy efficiency of 53.8%.A detailed sensitivity analysis on energy efficiency is also carried out.
文摘Over the last decade, the uptake rate of first-generation biofuels (ethanol and biodiesel) has decelerated as low blend limits have increased only slowly and extreme volatility in oil prices has limited investment in biofuels production infrastructure. Concerns over the environmental impacts of large-scale biofuels production combined with tariff barriers have greatly restricted the global trade in biofuels. First-generation biofuels produced either by fermentation of sugars from maize or sugarcane (ethanol) or transesterification of triglycerides (biodiesel) presently contribute less than 4% of terrestrial transportation fuel demand and techno-economic modelling foresees this only slowly increasing by 2035. With internal combustion and diesel engines widely anticipated as being phased out in favour of electric power for motor vehicles, a much-reduced market demand for biofuels is likely if global demand for all liquid fuels declines by 2050. However, second-generation, thermochemically produced and biomass-derived fuels (renewable diesel, marine oils and sustainable aviation fuel) have much higher blend limits;combined with policies to decarbonise the aviation and marine industries, major new markets for these products in terrestrial, marine and aviation sectors may emerge in the second half of the 21st century.
基金supported by the National Basic Research and Development Program of China (No. 2009CB220100)Beijing Excellent Talent Support Program (No. 20071D1600300396)
文摘Three co-impregnation/chemical reduction methods in acidic solutions of pH 〈 1,including ethylene glycol （EG）,NaBH4,and HCOOH,were compared for Pt-WO3/C catalysts.Pt-WO3/C catalysts containing 10 wt.% and 20 wt.% platinum per carbon were prepared by the three methods; their morphology and electrocatalytic activities were characterized.The 20 wt.% Pt-WO3/C catalyst prepared by the co-impregnation/EG method presented the optimal dispersion with an average particle size of 4.6 nm and subsequently the best electrocatalytic activity,and so,it was further characterized.Its anodic peak current density for ethanol oxidation from linear sweep voltammetry （LSV） is 7.9 mA·cm^-2,which is 1.4 and 5.2 times as high as those of the catalysts prepared by co-impregnation/NaBH4 and co-impregnation/ HCOOH reduction methods,2.1 times as high as that of the 10 wt.% Pt-WO3/C catalyst prepared by co-impregnation/EG method,respectively.
基金supported by the International Science and Technology Cooperation Program of China (No. 2006DFA61240)
文摘To enhance the CO-tolerance performance of anode catalysts for direct ethanol fuel cells,carbon nanotubes were modified by titanium dioxide （donated as CNTs@TiO2） and subsequently served as the support for the preparation of Pt/CNTs@TiO2 and Pt-Mo/CNTs@TiO2 electrocatalysts via a UV-photoreduction method.The physicochemical characterizations of the catalysts were carried out by using X-ray diffraction （XRD）,transmission electron microscopy （TEM）,X-ray photoelectron spectroscopy （XPS）,and infrared spectroscopy of adsorbed probe ammonia molecules.The electrocatalytic properties of the catalysts for methanol oxidation were investigated by the cyclic voltammetry technique.The results show that Pt-Mo/CNTs@TiO2 electrode exhibits the highest performance in all the electrodes.It is explained that,the structure,the oxidation states,and the acid-base properties of the catalysts are influenced due to the strong interaction between Ti and Mo species by adding TiO2 and MoOx to the Pt-based catalysts.
文摘The preparation of ethanol-diesel fuel blends and their emission characteristics were investigated. Results showed the absolute ethanol can dissolve in diesel fuel at an arbitrary ratio and a small quantity of water(0.2%) addition can lead to the phase separation of blends. An organic additive was synthesized and it can develop the ability of resistance to water and maintain the stability of ethanol-diesel-trace amounts of water system. The emission characteristics of 10%, 20%, and 30% ethanol-diesel fuel blends, with or without additives, were compared with those of diesel fuel in a direct injection(DI) diesel engine. The experimental results indicated that the blend of ethanol with diesel fuel significantly reduced the concentrations of smoke, hydrocarbon(HC), and carbon monoxide(CO) in exhaust gas. Using 20% ethanol-diesel fuel blend with the additive of 2% of the total volume, the optimum mixing ratio was achieved, at which the bench diesel engine testing showed a significant decrease in exhaust gas. Bosch smoke number was reduced by 55%, HC emission by 70%, and CO emission by 45%, at 13 kW/1540 r/min. However, ethanol-diesel fuel blends produced a few ppm acetaldehydes and more ethanol in exhaust gas.
基金Key Project of National Natural Science Foundation of China (No.20436040) National Natural Science Foundation of China (No.20176044)
文摘A novel routine for removing water from ethanol by the hydration using C4 olefin cut catalyzed with the ion exchange resin was proposed. Reactive distillation experiments were carried out to demonstrate the feasibility of this routine. The sensitivity analysis was performed by using the software of ASPEN PLUS 10.2. The optimized operating conditions were obtained considering three objective functions which were the water content of the bottom product, water conversion rate and hydration selectivity. Under the optimized operation conditions, the final product was consisted of 45.0% of ethanol, 19.4% of ethyl tert-butyl ether, 35.1% of tert-butyl alcohol and 0.6% of water in volumetric percentage.
文摘To evaluate the environmental, economic, energy performance of biomass ethanol fuel in China and to support the decision-making of biomass ethanol energy policy, an assessment method of life cycle 3E (economy, environment, energy) was applied to the three biomass ethanol fuel cycle alternatives, which includes cassava-based, corn-based and wheat-based ethanol fuel. The assessments provide a comparison of the economical performance, energy efficiency and environmental impacts of the three alternatives. And the development potential of the three alternatives in China was examined. The results are very useful for the Chinese government to make decisions on the biomass ethanol energy policy, and some advises for the decision-making of Chinese government were given.
文摘Biomass ethanol fuel is not only renewable but also environmental-friendly. Guangxi Zhuang Autonomous Region is developing the cassava-based ethanol fuel. Economical performance of the project is the key issue. The traditional life cycle economical analysis is just a static calculation process. Uncertainty is the character of cassava yield, cost of cassava plant, cassava price, tax rate and gasoline price, and the economical performance of the project is determined by these aspects. This study proposes an economical model of cassava-based ethanol fuel. The method of Monte Carol is used to simulate the economical performance. This method conquers the shortage of the traditional way. The results show that cassava-based ethanol fuel can get survived when the tax is exempted. Finally, the study also evaluates the potential of the economical performance.
文摘The primary barrier to the use of ethanol in diesel fuel is the poor miscibility at lower temperatures. The miscibilities of ethanol in 19 diesel fuels having a wide variation in compositions were evaluated by testing their phase separation temperatures. The result shows that aromatic contents and intermediate distillate temperatures have a significant impact on miscibility limits. The FCC diesels, which contain up to 50% of aromatics, exhibit different phase behavior trends in comparison with straight-run diesels and other diesel fuels.
基金supported by the National Natural Science Foundation of China (21307038 and 21577046)Key Project of Chinese Ministry of Education (212115)Physical Chemistry Experiment of Huanggang Normal University (2015CK12)~~
文摘Pt/Ni catalysts modified with CeO2 nanoparticles were prepared by simple composite electrodeposition of Ni and CeO2,and spontaneous Ni partial replacement by Pt processes.The as-prepared CeO2-modified Pt/Ni catalysts showed enhanced catalytic performance for ethanol electro-oxidation compared with pure Pt/Ni,and acetate species were proposed to be the main products of the oxidation when using these catalysts.The content of CeO2 in the as-prepared catalysts influenced their catalytic activity,with Pt/NiCe2（obtained from an electrolyte containing 100 mg/L CeO2 nanoparticles） exhibiting higher activity and relatively better stability in ethanol electro-oxidation.This was mainly due to the oxygen storage capacity of CeO2,the interaction between Pt and CeO2/Ni,and the relatively small contact and charge transfer resistances.The results of this work thus suggest that electrocatalysts with low price and high activity can be rationally designed and produced by a simple route for use in direct ethanol fuel cells.
