Highly permeable geological structures such as dissolution channels, open fractures, and faults create environmental challenges regard to hydrological and hydrogeological aspects of underground construction, often cau...Highly permeable geological structures such as dissolution channels, open fractures, and faults create environmental challenges regard to hydrological and hydrogeological aspects of underground construction, often causing significant groundwater inflow during drilling due to the limitations of empirical and analytical methods. This study aims to identify the geological factors influencing water flow into the tunnel. High-flow zones' geological features have been identified and examined for this purpose. According to the geological complexity of the Nowsud tunnel, presence of different formations with different permeability and karstification have led to a high volume of underground inflow water (up to 4700 L/s) to the tunnel. The Nowsud tunnel faces significant geological and hydrogeological challenges due to its passage through the Ilam formation's LI2 unit, characterized by dissolution channels, faults, and fractures. The highest inflow rate (4700 L/s) occurred in the Hz-9 zone within the Zimkan anticline. The relationship between geological features and groundwater inflow indicates that anticlines are more susceptible to inflow than synclines. Additionally, different types of faults exhibit varying hydraulic effects, with strike-slip faults having the most significant impact on groundwater inflow, thrust faults conducting less water into the tunnel, and inflow through normal faults being negligible compared to the other two types of faults. The novelty of this paper lies in its detailed analysis of geological features influencing groundwater inflow into the Nowsud tunnel, providing empirical data on high-flow zones and differentiating the hydraulic effects of various fault types, which enhances the understanding and prediction of groundwater inflow in underground constructions.展开更多
The investigation of the in situ stress distribution has always been a key condition for engineering design of deep tunnels and analysis of surrounding rock stability.In this paper,a comprehensive judgment method coup...The investigation of the in situ stress distribution has always been a key condition for engineering design of deep tunnels and analysis of surrounding rock stability.In this paper,a comprehensive judgment method coupled with pressure/tension(P/T)axis mechanism and geological structure is proposed to invert the in situ stress in the Duoxiongla tunnel in Tibet.In the process of TBM tunnel excavation,3887 groups of microseismic events were collected by means of microseismic monitoring technology.By studying the temporal and spatial distribution of 3887 groups of microseismic events,42 groups of microseismic data were selected for in situ stress inversion.Then the focal mechanisms of 42 groups of microseisms were inverted.Combined with the analysis of the previous geological survey,the inversion results of the in situ stress were analyzed.According to the focal mechanism of the tunnel area,the linear in situ stress inversion method was used to invert the in situ stress in the source area.Finally,according to the PTGS(pressure/tension axis mechanism and geological structure)comprehensive judgment method proposed in this paper,the in situ stress of the tunnel microseismic region was determined.The results show that there are mainly three groups of fissures and joint surfaces in the tunnel area,and the in situ stress is dominated by the horizontrun tectonic stress;the main driving force of the rupture surface in the excavation process of Duoxiongla tunnel is the horizontal tectonic stress;the distribution of the maximum and minimum principal stress obtained by the inversion is consistent with the distribution of the P/T axis;combined with the linear in situ stress inversion method and the comprehensive judgment of PTGS,the azimuth and dip angles of the three principal stresses are finally determined as N90.71°E,4.06°,N5.35°W,3.06°,and N8.10W,85.32°,respectively.The study verifies the feasibility of microseismic inversion of in situ stress.展开更多
The Bohai Bay Basin contains many depressions with varying degrees of hydrocarbon enrichment associated with the geological structures of different depressions. This study discussed the relationship between the geolog...The Bohai Bay Basin contains many depressions with varying degrees of hydrocarbon enrichment associated with the geological structures of different depressions. This study discussed the relationship between the geological structures and hydrocarbon enrichment of the depressions in the Bohai Bay Basin. Based on the Paleogene strata distribution and the length to width ratio of different depressions, their geological structures are divided into three types in plan-view： open（length/width 〈 2）, narrow（length/width 〉 4） and transitional types（length/width 2-4）. In cross section, the geological structures can be divided into dustpan I, dustpan II and double-faulted types. Based on tectonic evolution and sedimentary characteristics, the depressions are classified into early-formed, inherited and late-formed categories. Generally, narrow depressions are mainly located in the northeast and southwest of the Bohai Bay Basin, while open depressions are dominantly distributed in the central area of the basin; late-formed depressions are mainly around the Bohai sea area, and early-formed depressions are mostly located in the periphery of the basin. Geological structures of the depressions control the formation of the source, reservoir and cap rocks as well as hydrocarbon accumulation setting, and further influence the pay zones and oil-bearing sequence. In detail, dustpan II and doublefaulted depressions mainly have A-type sags, which often possess better hydrocarbon generation conditions than dustpan I ones; hydrocarbons in open dustpan II depressions tend to accumulate in the central uplift areas or buried hill, while those in narrow dustpan I depressions always accumulate in gentle slope belts. The oil-bearing sequence for different evolutional depressions corresponds well with the sedimentary strata of the main development stages of depressions. In early-formed depressions, hydrocarbons are mainly enriched in deeply buried reservoirs, while in late-formed depressions hydrocarbons are abundant in the relatively shallow traps. In summary, most inherited and late-formed dustpan II depressions are enriched in hydrocarbons due to their extensive source rocks and good source-reservoir-seal assemblages, whereas dustpan I and early-formed depressions are relatively poor in hydrocarbons.展开更多
Acoustic reflection imaging in deep water wells is a new application scope for offshore hydrocarbon exploration.Two-dimensional(2 D)geological structure images can be obtained away from a one-dimensional(1 D)borehole ...Acoustic reflection imaging in deep water wells is a new application scope for offshore hydrocarbon exploration.Two-dimensional(2 D)geological structure images can be obtained away from a one-dimensional(1 D)borehole using single-well acoustic reflection imaging.Based on the directivity of dipole source and four-component dipole data,one can achieve the azimuth detection and the three-dimensional(3 D)structural information around the wellbore can be obtained.We first perform matrix rotation on the field fourcomponent data.Then,a series of processing steps are applied to the rotated dipole data to obtain the reflector image.According to the above dipole shear-wave imaging principle,we used four-component cross-dipole logging data from a deviated well in the South China Sea to image geological structures within 50 m of a deviated well,which can delineate the structural configuration and determine its orientation.The configuration of near-borehole bedding boundaries and fault structures from shear-wave imaging results agrees with those from the Inline and Xline seismic profiles of the study area.In addition,the configuration and orientation of the fault structure images are consistent with regional stress maps and the results of the borehole stress anisotropy analysis.Furthermore,the dip azimuth of the bedding boundary images was determined using borehole wall resistivity data.Results of this study indicate that integrating borehole acoustic reflection with seismic imaging not only fills the gap between the two measurement scales but also accurately delineates geological structures in the borehole vicinity.展开更多
Uncertainty in 3D geological structure models has become a bottleneck that restricts the development and application of 3D geological modeling.In order to solve this problem during periods of accuracy assessment,error...Uncertainty in 3D geological structure models has become a bottleneck that restricts the development and application of 3D geological modeling.In order to solve this problem during periods of accuracy assessment,error detection and dynamic correction in 3D geological structure models,we have reviewed the current situation and development trends in 3D geological modeling.The main context of uncertainty in 3D geological structure models is discussed.Major research issues and a general framework system of uncertainty in 3D geological structure models are proposed.We have described in detail the integration of development practices of 3D geological modeling systems,as well as the implementation process for uncertainty evaluation in 3D geological structure models.This study has laid the basis to build theoretical and methodological systems for accuracy assessment and error correction in 3D geological models and can assist in improving 3D modeling techniques under complex geological conditions.展开更多
The ridge like seafloor highs with various geological origins can be classed into mid-ocean ridges,transverse ridges related to transform faults,hot spot/mantle plume originated ridges,microcontinent rifted from major...The ridge like seafloor highs with various geological origins can be classed into mid-ocean ridges,transverse ridges related to transform faults,hot spot/mantle plume originated ridges,microcontinent rifted from major continent,intra-plate arc formed by interaction of two oceanic plates,and tectonic ridges uplifted by later tectonic activity.Those ridges moved towards the convergent continental margins along with the underlain plate drifting and formed so-called accreted ridges commonly trending at a high angle to the continental margins.At divergent continental margins,the continental crusts were extended and thinned accompanying with magmatism,which formed high terrains protruding or parallel to the coastal line.The ridges worldwide have various origins and the crustal thicknesses and structures of them are diversity.The crusts beneath the microcontinents,and the transverse ridges along the transform margin,and the seafloor highs beside the passive continental margins are continental,while the crusts of other ridges are oceanic.Article 76 of the United Nations Convention on the Law of the Sea （UNCLOS） has classed the seafloor highs worldwide into three legal categories,namely oceanic ridges,submarine ridges and submarine elevations,for the purpose to delineate the outer limit of the coastal States＇ continental shelf beyond 200 nautical miles.To define the categories of the legal seafloor highs to which the ridges with various geological origins belong,the continuities in morphology and geology including the rock types,crustal structures,origins and tectonic setting of the ridges and the coastal States＇ land mass with its submerged prolongation should be taken into account.If a ridge is continuous both in morphology and geology with the coastal States＇ land mass and its submerged prolongation,it is a submarine elevation stipulated in Article 76.If it is discontinuous in morphology,the ridge should be regarded as oceanic ridges.If a ridge is continuous in morphology but discontinuous in geology with the coastal States＇ land mass and its submerged prolongation,then it is a submarine ridge as stipulated in Article 76.展开更多
Based on the study of regional displaying rules of coal and gas outburst controlled by geological structure in Pingdingshan mining area, the geological structure features in outburst sites were investigated emphatical...Based on the study of regional displaying rules of coal and gas outburst controlled by geological structure in Pingdingshan mining area, the geological structure features in outburst sites were investigated emphatically. The combination type, orientation and least seam thickness in outburst sites were put forward. This research provides a geological mark for forecasting gas outbursts in deep mining.展开更多
The geological structure background, the crustal structure and the shape of Moho in the northeastern margin of the Qinghai-Tibetan plateau are studied. Based on artificial seismic sounding profile as well as geologica...The geological structure background, the crustal structure and the shape of Moho in the northeastern margin of the Qinghai-Tibetan plateau are studied. Based on artificial seismic sounding profile as well as geological data. The main results are summarized as follows: (1) The geotectonic subdivisions and the characteristics of main deep and large faults in the northeastern margin of the Qinghai-Tibetan plateau are presented; (2) The general features of the Moho are obtained mainly based on artificial seismic sounding data; (3) There exists well corresponding relation between surface faults and some features of the Moho, which suggests that such complex crustal structure might be the preparation environment of strong earthquakes.展开更多
The occurrence state of methane is mostly controlled by coalfield geologicalstructures.The coal-bearing strata at Qidong coalmine experienced many tectonic cyclessince their formation.The gas content made by the compl...The occurrence state of methane is mostly controlled by coalfield geologicalstructures.The coal-bearing strata at Qidong coalmine experienced many tectonic cyclessince their formation.The gas content made by the complicated structural geologic systemat the coalfield is very different, which is obviously higher on the north side of the Weimiaofracture belt than that on the south side and near itself.This thesis discussed the gas occurrenceregularity based on the geometric characteristics of the geological structure andits regional tectonic evolution.This study can provide a foundation for coalfield exploitationand deal with coal and gas outburst.展开更多
Further evidences show that most mining dynamic disasters are mainly oc- curred nearby NNE and near SN geological structures.In-situ stress measurement in Fuxin basin shows that the orientation of major compressed str...Further evidences show that most mining dynamic disasters are mainly oc- curred nearby NNE and near SN geological structures.In-situ stress measurement in Fuxin basin shows that the orientation of major compressed stress is near EW.At this stress field,geological structures with deferent strike have deferent stress state and dis- place mode.NNE and near SN geological structures are compressed to thrust and come into being high stress zone.NWW and NEE geological structures are tensile to separate and not prone to being low stress zone.NW structure is intervenient of them.So NEE and near SN structures are easy to occurre mining dynamic disasters and NWW and NEE structures is 'safety' comparatively.The mining dynamic disaster is controlled by stress state of geologic structure,which is determined by its strike.展开更多
Based on seismic and drilling data in the study area,the geological structure and kinematic process of the Termit rift basin were studied using seismic profile interpretation and balanced restoration to find out the d...Based on seismic and drilling data in the study area,the geological structure and kinematic process of the Termit rift basin were studied using seismic profile interpretation and balanced restoration to find out the dynamic mechanism of the basin.(1)The geological structure of the Termit Basin is represented as a narrow rift basin,with development of series of structural styles in extensional,extensional strike-slip and compressional stress setting.On plane,it is narrow in the north and wide in the south,and transitions from graben to half-graben from north to south;it features a graben controlled by the boundary faults in the north and a fault-overlapped half-graben in the south.(2)Before the Cretaceous,a series of hidden faults developed in the West African rift system,which laid the foundation for the development location and distribution direction of the Termit Basin;during the Cretaceous to Paleogene periods,the basin experienced two phases of rifting in Early Cretaceous and Paleogene,which controlled the initial structure and current structural shape of the basin respectively;during the Neogene to Quaternary,the basin was subjected to weak transformation.(3)In the Precambrian,the Pan-African movement gave rise to a narrow and long weak zone within the African plate,which provided the pre-existing structural conditions for the formation of the Termit Basin.In the Early Cretaceous,affected by the South Atlantic rifting,the Pan African weak zone was reactivated,resulting in the first stage of rifting and the basic structural framework of the Termit Basin.In the Paleogene,affected by the subduction and convergence of the Neo-Tethys Ocean,the African-Arabian plate extended in near E-W trending,and the Termit Basin experienced the second stage of rifting.The oblique extension in this period caused intense structural differentiation,and the current structural pattern of alternate uplifts and depressions took shape gradually.展开更多
Based on the latest geological,seismic,drilling and outcrop data,we studied the geological structure,tectonic evolution history and deformation process of the southwestern Sichuan fold-thrust belt to find out the pote...Based on the latest geological,seismic,drilling and outcrop data,we studied the geological structure,tectonic evolution history and deformation process of the southwestern Sichuan fold-thrust belt to find out the potential hydrocarbon exploration areas in deep layers.During key tectonic periods,the southwestern Sichuan fold-thrust belt developed some characteristic strata and structural deformation features,including the Pre-Sinian multi-row N-S strike rifts,step-shaped platform-margin structures of Sinian Dengying Formation,the western paleo-uplift in the early stage of Late Paleozoic,the Late Paleozoic–Middle Triassic carbonate platform,foreland slope and forebulge during Late Triassic to Cretaceous,and Cenozoic multi-strike rejuvenated fold-thrusting structures.The fold-thrust belt vertically shows a double-layer structural deformation controlled by the salt layer in the Middle Triassic Leikoupo Formation and the base detachment layer at present.The upper deformation layer develops the NE-SW strike thrusts propagating toward basin in long distance,while the deeper deformation layer had near north-south strike basement-involved folds,which deformed the detachment and thrusting structures formed earlier in the upper layer,with the deformation strength high in south part and weak in north part.The southern part of the fold-thrust belt is characterized by basement-involved fold-thrusts formed late,while the central-northern part is dominated by thin-skin thrusts in the shallow layer.The Wuzhongshan anticlinal belt near piedmont is characterized by over-thrust structure above the salt detachment,where the upper over-thrusting nappe consists of a complicated fold core and front limb of a fault-bend fold,while the deep layer has stable subtle in-situ structures.Favorable exploration strata and areas have been identified both in the upper and deeper deformation layers separated by regional salt detachment,wherein multiple anticlinal structures are targets for exploration.Other potential exploration strata and areas in southwestern Sichuan fold-thrust belt include the deep Sinian and Permian in the Wuzhongshan structure,pre-Sinian rifting sequences and related structures,platform-margin belt of Sinian Dengying Formation,and Indosinian paleo-uplift in the east of the Longquanshan structure.展开更多
As the western boundary of the Sichuan-Yunnan block(SYB),the Red River fault(RRF)is a major fault that controls deep crustal movement and deformation in the southeast margin of the Tibetan Plateau and regulates middle...As the western boundary of the Sichuan-Yunnan block(SYB),the Red River fault(RRF)is a major fault that controls deep crustal movement and deformation in the southeast margin of the Tibetan Plateau and regulates middle-lower crustal flow.Geophysical data suggest that the RRF is segmented and exhibits distinct variations in seismicity,velocity structure and crustal deformation from north to south.Seismic anisotropy reveals a complex pattern of lateral spatial and vertical stratified distributions.(1)From the perspective of crustal stratification,in the upper crust,the fast wave polarization in the north segment of the RRF is complex and possibly influenced by the Sanjiang lateral collision zone and adjacent faults with varying strikes.The fast wave polarization in the middle segment is in the NW-SE direction,indicating a localized area of closed down or locked up with consistent deformation.And in the south segment,it presents a disordered pattern,signifying complex deep tectonics and stress conditions at the wedged intersection zone.In the middle-lower crust in the north and south segments of the RRF,the azimuthal anisotropy is strong and consistent with the spatial strike of the weak zone characterized by low-velocity and highconductivity.This suggests a connection between the anisotropy and the material migration.(2)In the whole crustal scale,the fast wave directions in two sides of the RRF are consistent with the NW-SE tectonic strike.It indicates that the RRF,as a large fault potentially cutting through the whole crust,strongly controls the surrounding media.(3)In the lithospheric scale,the fast wave polarizations are oriented nearly E-W and independent of the fault strike,consistent with the low P-and S-wave velocity structures and positive radial anisotropy in the upper mantle.The fast wave directions could be related to lithospheric olivine deformation and asthenospheric flow.This paper suggests a decoupling of deformation between the crust and the lithospheric mantle in the south of approximately 26°20′N near the RRF,which can potentially be attributed to the subduction and rollback of the Indian plate.Based on various geophysical observations and inversions,we can determine the detailed anisotropic structure in the crust and the upper mantle around the RRF.Denser geophysical arrays and more accurate records can be used to explore the intricate anisotropy in segmentation and stratification around the RRF,enhancing the understanding of its tectonic significance.展开更多
The surrounding geological conditions and supporting structures of underground engineering are often updated during construction,and these updates require repeated numerical modeling.To improve the numerical modeling ...The surrounding geological conditions and supporting structures of underground engineering are often updated during construction,and these updates require repeated numerical modeling.To improve the numerical modeling efficiency of underground engineering,a modularized and parametric modeling cloud server is developed by using Python codes.The basic framework of the cloud server is as follows:input the modeling parameters into the web platform,implement Rhino software and FLAC3D software to model and run simulations in the cloud server,and return the simulation results to the web platform.The modeling program can automatically generate instructions that can run the modeling process in Rhino based on the input modeling parameters.The main modules of the modeling program include modeling the 3D geological structures,the underground engineering structures,and the supporting structures as well as meshing the geometric models.In particular,various cross-sections of underground caverns are crafted as parametricmodules in themodeling program.Themodularized and parametric modeling program is used for a finite element simulation of the underground powerhouse of the Shuangjiangkou Hydropower Station.This complicatedmodel is rapidly generated for the simulation,and the simulation results are reasonable.Thus,this modularized and parametric modeling program is applicable for three-dimensional finite element simulations and analyses.展开更多
In western China seismic wave fields are very complicated and have low signal to noise ratio.In this paper,we focus on complex wave field research by forward modeling and indicate that density should not be ignored in...In western China seismic wave fields are very complicated and have low signal to noise ratio.In this paper,we focus on complex wave field research by forward modeling and indicate that density should not be ignored in wave field simulation if the subsurface physical properties are quite different.We use the acoustic wave equation with density in the staggered finite-difference method to simulate the wave fields.For this purpose a complicated geologic structural model with rugged surfaces,near-surface low-velocity layers,and high-velocity outcropping layers was designed.Based on the instantaneous wave field distribution,we analyzed the mechanism forming complex wave fields.The influence of low velocity layers on the wave field is very strong.A strong waveguide occurs between the top and base of a low velocity layer,producing multiples which penetrate into the earth and form strong complex wave fields in addition to reflections from subsurface interfaces.For verifying the correctness of the simulated wave fields,prestack depth migration was performed using different algorithms from the forward modeling.The structure revealed by the stacked migration profile is same as the known structure.展开更多
On the basis of field observations, microscopic thin-sections and laboratory data analysis of ten faults in Xuanhan County area, northeastern Sichuan Basin, central China, the internal and megascopic structures and te...On the basis of field observations, microscopic thin-sections and laboratory data analysis of ten faults in Xuanhan County area, northeastern Sichuan Basin, central China, the internal and megascopic structures and tectonite development characteristics are mainly controlled by the geomechanical quality in brittle formation of the Changxing-Feixianguan Formation. The fluid transportation performance difference between the faults formed by different geomechanics or different structural parts of the same fault are controlled by the mcgascopic structure and tectonite development characteristics. For instance, the extension fault structure consists of a tectonite breccia zone and an extension fracture zone. Good fluid transportation performance zones are the extension fracture zone adjacent to the tectonite breccia zone and the breccia zone formed at the early evolutionary stage. The typical compression fault structure consists of a boulder-clay zone or zones of grinding gravel rock, compression foliation, tectonite lens, and dense fracture development. The dense fracture development zone is the best fluid transporting area at a certain scale of the compression fault, and then the lens, grinding gravel rock zone and compression foliation zones are the worst areas for hydrocarbon migration. The typical tensor-shear fault with a certain scale can be divided into boulder-clay or grinding gravel rock zones of the fault, as well as a pinnate fractures zone and a derivative fractures zone. The grinding gravel rock zone is the worst one for fluid transportation. Because of the fracture mesh connectivity and better penetration ability, the pinnate fractures zone provides the dominant pathway for hydrocarbon vertical migration along the tensor-shear fault.展开更多
A structural cross-section constructed across the Zagros Fold-Thrust Belt covering the Abadan Plain, Dezful Embayment, and Izeh Zone applied 2D and 3D seismic data, well data, surface and subsurface geological maps, s...A structural cross-section constructed across the Zagros Fold-Thrust Belt covering the Abadan Plain, Dezful Embayment, and Izeh Zone applied 2D and 3D seismic data, well data, surface and subsurface geological maps, satellite images and field reconnaissance. Besides validation and modification of the cross-section, restoration allows better understanding of the geology, structural style and stratigraphy of the Zagros basin. In the area of interest, the Hormuz basal decollement and the Gachsaran detachment play the most significant roles in the structural style and deformation of the Zagros belt. More complexity is associated with interval decollements such as Triassic evaporites, Albian shales and Eocene marls. A variety of lithotectonic units and detachment surfaces confound any estimation of shortening, which generally decreases with increasing depth. Deformation completely differs in the Abadan Plain, Dezful Embayment and Izeh Zone because of different sedimentation histories and tectonic evolution; gentle and young structures can be interpreted as pre-collisional structures of the Dezful Embayment before the Late Cretaceous. After the Late Cretaceous, the Mountain Front Fault is the main control of sedimentation and deformation in the Zagros Basin, and this completely characterizes fold style and geometry within the Dezful Embayment and the Izeh Zone.展开更多
Gunungsewu is a karst terrain that shows unique geomorphologic phenomena. The area is mainly composed of limestone of Wonosari Formation. Interaction of tectonic, erosion, denudation, and deposition occurred since Mio...Gunungsewu is a karst terrain that shows unique geomorphologic phenomena. The area is mainly composed of limestone of Wonosari Formation. Interaction of tectonic, erosion, denudation, and deposition occurred since Miocene period brings about diversity of landforms that supporting the development of this area as a natural laboratory, specific interest, scientific and educational tourisms. In general the geomorphology of Gunungsewu can be classified into two groups of landforms, the first is positive relief and the second is negative relief. The positive relief includes hills of conical, dome, convex-cone, convex and ridge. The negative relief involves cave, shaft, doline, uvala, locva and polje. This diversity is influenced by variation of physical properties of rock composing the landforms, such as hardness, internal friction angle, and geologic structures including thickness and position of bedding plane as well as joint pattern.展开更多
As typical carbonate geothermal reservoirs with low porosity in northern China,the Jixianian System in the Xiong’an New Area is the main target for geothermal fluid exploration.The Jixianian System comprises the Gaoy...As typical carbonate geothermal reservoirs with low porosity in northern China,the Jixianian System in the Xiong’an New Area is the main target for geothermal fluid exploration.The Jixianian System comprises the Gaoyuzhuang,Yangzhuang,Wumishan,Hongshuizhuang,and Tieling formations.The characteristics,formation periods,and controlling factors of reservoir tectonic fractures have been determined based on analyses of outcrops,cores,thin sections,and image logs.The results show that unfilled fractures account for over 87% and most tectonic fractures are high-angle shear fractures with angles concentrated at 40°to 70°and the fracture porosity increases linearly with an increased fracture aperture.Within the same tectonic setting and stress field,the lithology and layer thickness are the dominant factors governing the development of tectonic fractures,which are the most developed in dolomites and thin layers.Tectonic fractures were most likely formed in regions near faults or areas with larger stress gradients.The tectonic fractures in the carbonate geothermal reservoirs are roughly divided into four sets:NNW-SSE and NNE-SSW oriented‘X’-conjugated shear fractures formed from the Paleozoic to the pre-Yanshanian Movement;NE-SW-oriented shear fractures,formed in episode B of the Yanshanian Movement,occurred at the Early Cretaceous;nearly E-W-oriented tensional fractures formed in the late Yanshanian Movement at the Late Cretaceous to Paleogene,and NEE-SW-oriented shear fractures formed during the Himalayan movement.展开更多
文摘Highly permeable geological structures such as dissolution channels, open fractures, and faults create environmental challenges regard to hydrological and hydrogeological aspects of underground construction, often causing significant groundwater inflow during drilling due to the limitations of empirical and analytical methods. This study aims to identify the geological factors influencing water flow into the tunnel. High-flow zones' geological features have been identified and examined for this purpose. According to the geological complexity of the Nowsud tunnel, presence of different formations with different permeability and karstification have led to a high volume of underground inflow water (up to 4700 L/s) to the tunnel. The Nowsud tunnel faces significant geological and hydrogeological challenges due to its passage through the Ilam formation's LI2 unit, characterized by dissolution channels, faults, and fractures. The highest inflow rate (4700 L/s) occurred in the Hz-9 zone within the Zimkan anticline. The relationship between geological features and groundwater inflow indicates that anticlines are more susceptible to inflow than synclines. Additionally, different types of faults exhibit varying hydraulic effects, with strike-slip faults having the most significant impact on groundwater inflow, thrust faults conducting less water into the tunnel, and inflow through normal faults being negligible compared to the other two types of faults. The novelty of this paper lies in its detailed analysis of geological features influencing groundwater inflow into the Nowsud tunnel, providing empirical data on high-flow zones and differentiating the hydraulic effects of various fault types, which enhances the understanding and prediction of groundwater inflow in underground constructions.
基金National Postdoctoral Program for Innovative Talent of China,Grant/Award Number:BX20200191National Natural Science Foundation of China,Grant/Award Number:52079068The State Key Laboratory of Hydroscience and Hydraulic Engineering,Grant/Award Number:2021-KY-04。
文摘The investigation of the in situ stress distribution has always been a key condition for engineering design of deep tunnels and analysis of surrounding rock stability.In this paper,a comprehensive judgment method coupled with pressure/tension(P/T)axis mechanism and geological structure is proposed to invert the in situ stress in the Duoxiongla tunnel in Tibet.In the process of TBM tunnel excavation,3887 groups of microseismic events were collected by means of microseismic monitoring technology.By studying the temporal and spatial distribution of 3887 groups of microseismic events,42 groups of microseismic data were selected for in situ stress inversion.Then the focal mechanisms of 42 groups of microseisms were inverted.Combined with the analysis of the previous geological survey,the inversion results of the in situ stress were analyzed.According to the focal mechanism of the tunnel area,the linear in situ stress inversion method was used to invert the in situ stress in the source area.Finally,according to the PTGS(pressure/tension axis mechanism and geological structure)comprehensive judgment method proposed in this paper,the in situ stress of the tunnel microseismic region was determined.The results show that there are mainly three groups of fissures and joint surfaces in the tunnel area,and the in situ stress is dominated by the horizontrun tectonic stress;the main driving force of the rupture surface in the excavation process of Duoxiongla tunnel is the horizontal tectonic stress;the distribution of the maximum and minimum principal stress obtained by the inversion is consistent with the distribution of the P/T axis;combined with the linear in situ stress inversion method and the comprehensive judgment of PTGS,the azimuth and dip angles of the three principal stresses are finally determined as N90.71°E,4.06°,N5.35°W,3.06°,and N8.10W,85.32°,respectively.The study verifies the feasibility of microseismic inversion of in situ stress.
基金granted by the National Natural Science Foundation(Grant No.41372132)Important National Science&Technology Specific Projects(Grant No.2011ZX05006-003)
文摘The Bohai Bay Basin contains many depressions with varying degrees of hydrocarbon enrichment associated with the geological structures of different depressions. This study discussed the relationship between the geological structures and hydrocarbon enrichment of the depressions in the Bohai Bay Basin. Based on the Paleogene strata distribution and the length to width ratio of different depressions, their geological structures are divided into three types in plan-view： open（length/width 〈 2）, narrow（length/width 〉 4） and transitional types（length/width 2-4）. In cross section, the geological structures can be divided into dustpan I, dustpan II and double-faulted types. Based on tectonic evolution and sedimentary characteristics, the depressions are classified into early-formed, inherited and late-formed categories. Generally, narrow depressions are mainly located in the northeast and southwest of the Bohai Bay Basin, while open depressions are dominantly distributed in the central area of the basin; late-formed depressions are mainly around the Bohai sea area, and early-formed depressions are mostly located in the periphery of the basin. Geological structures of the depressions control the formation of the source, reservoir and cap rocks as well as hydrocarbon accumulation setting, and further influence the pay zones and oil-bearing sequence. In detail, dustpan II and doublefaulted depressions mainly have A-type sags, which often possess better hydrocarbon generation conditions than dustpan I ones; hydrocarbons in open dustpan II depressions tend to accumulate in the central uplift areas or buried hill, while those in narrow dustpan I depressions always accumulate in gentle slope belts. The oil-bearing sequence for different evolutional depressions corresponds well with the sedimentary strata of the main development stages of depressions. In early-formed depressions, hydrocarbons are mainly enriched in deeply buried reservoirs, while in late-formed depressions hydrocarbons are abundant in the relatively shallow traps. In summary, most inherited and late-formed dustpan II depressions are enriched in hydrocarbons due to their extensive source rocks and good source-reservoir-seal assemblages, whereas dustpan I and early-formed depressions are relatively poor in hydrocarbons.
基金supported by the National Natural Science Foundation of China(Nos.41804124,41774138,41804121,41604109)China Academy of Sciences Strategic Leading Science and Technology Project(Grant Nos.XDA14020304,XDA14020302)+2 种基金Shandong Provincial Natural Science Foundation,China(No.ZR2019BD039)Shandong Province Postdoctoral Innovation Project(No.201901011)China Postdoctoral Science Foundation(Grant Nos.2019T120615,2018M632745)
文摘Acoustic reflection imaging in deep water wells is a new application scope for offshore hydrocarbon exploration.Two-dimensional(2 D)geological structure images can be obtained away from a one-dimensional(1 D)borehole using single-well acoustic reflection imaging.Based on the directivity of dipole source and four-component dipole data,one can achieve the azimuth detection and the three-dimensional(3 D)structural information around the wellbore can be obtained.We first perform matrix rotation on the field fourcomponent data.Then,a series of processing steps are applied to the rotated dipole data to obtain the reflector image.According to the above dipole shear-wave imaging principle,we used four-component cross-dipole logging data from a deviated well in the South China Sea to image geological structures within 50 m of a deviated well,which can delineate the structural configuration and determine its orientation.The configuration of near-borehole bedding boundaries and fault structures from shear-wave imaging results agrees with those from the Inline and Xline seismic profiles of the study area.In addition,the configuration and orientation of the fault structure images are consistent with regional stress maps and the results of the borehole stress anisotropy analysis.Furthermore,the dip azimuth of the bedding boundary images was determined using borehole wall resistivity data.Results of this study indicate that integrating borehole acoustic reflection with seismic imaging not only fills the gap between the two measurement scales but also accurately delineates geological structures in the borehole vicinity.
基金provided by the Talent Training Project of the National Natural Science Foundation of China (No.J0730534)the National Natural Science Foundation of China (No.40902093)+1 种基金the Morning Light Plan of the Shanghai Educational Development Foundation (No.2007CG34)the Open Foundation of the Shanghai Key Laboratory of Urbanization and Ecological Restoration (No.200803)
文摘Uncertainty in 3D geological structure models has become a bottleneck that restricts the development and application of 3D geological modeling.In order to solve this problem during periods of accuracy assessment,error detection and dynamic correction in 3D geological structure models,we have reviewed the current situation and development trends in 3D geological modeling.The main context of uncertainty in 3D geological structure models is discussed.Major research issues and a general framework system of uncertainty in 3D geological structure models are proposed.We have described in detail the integration of development practices of 3D geological modeling systems,as well as the implementation process for uncertainty evaluation in 3D geological structure models.This study has laid the basis to build theoretical and methodological systems for accuracy assessment and error correction in 3D geological models and can assist in improving 3D modeling techniques under complex geological conditions.
文摘The ridge like seafloor highs with various geological origins can be classed into mid-ocean ridges,transverse ridges related to transform faults,hot spot/mantle plume originated ridges,microcontinent rifted from major continent,intra-plate arc formed by interaction of two oceanic plates,and tectonic ridges uplifted by later tectonic activity.Those ridges moved towards the convergent continental margins along with the underlain plate drifting and formed so-called accreted ridges commonly trending at a high angle to the continental margins.At divergent continental margins,the continental crusts were extended and thinned accompanying with magmatism,which formed high terrains protruding or parallel to the coastal line.The ridges worldwide have various origins and the crustal thicknesses and structures of them are diversity.The crusts beneath the microcontinents,and the transverse ridges along the transform margin,and the seafloor highs beside the passive continental margins are continental,while the crusts of other ridges are oceanic.Article 76 of the United Nations Convention on the Law of the Sea （UNCLOS） has classed the seafloor highs worldwide into three legal categories,namely oceanic ridges,submarine ridges and submarine elevations,for the purpose to delineate the outer limit of the coastal States＇ continental shelf beyond 200 nautical miles.To define the categories of the legal seafloor highs to which the ridges with various geological origins belong,the continuities in morphology and geology including the rock types,crustal structures,origins and tectonic setting of the ridges and the coastal States＇ land mass with its submerged prolongation should be taken into account.If a ridge is continuous both in morphology and geology with the coastal States＇ land mass and its submerged prolongation,it is a submarine elevation stipulated in Article 76.If it is discontinuous in morphology,the ridge should be regarded as oceanic ridges.If a ridge is continuous in morphology but discontinuous in geology with the coastal States＇ land mass and its submerged prolongation,then it is a submarine ridge as stipulated in Article 76.
基金National Natural Science Foundation of China(4 0 0 0 2 0 10 ) and Research Fund for Doctoral Program of Higher Edu-cation (92 2 90 0 8)
文摘Based on the study of regional displaying rules of coal and gas outburst controlled by geological structure in Pingdingshan mining area, the geological structure features in outburst sites were investigated emphatically. The combination type, orientation and least seam thickness in outburst sites were put forward. This research provides a geological mark for forecasting gas outbursts in deep mining.
基金National Key Research Development Project(95-13-02-02).Contribution No.LC2000052,Lanzhou Institute of Seismology,China SeismologicalBureau.
文摘The geological structure background, the crustal structure and the shape of Moho in the northeastern margin of the Qinghai-Tibetan plateau are studied. Based on artificial seismic sounding profile as well as geological data. The main results are summarized as follows: (1) The geotectonic subdivisions and the characteristics of main deep and large faults in the northeastern margin of the Qinghai-Tibetan plateau are presented; (2) The general features of the Moho are obtained mainly based on artificial seismic sounding data; (3) There exists well corresponding relation between surface faults and some features of the Moho, which suggests that such complex crustal structure might be the preparation environment of strong earthquakes.
基金Supported by the National Natural Science Foundation of China(40872103)
文摘The occurrence state of methane is mostly controlled by coalfield geologicalstructures.The coal-bearing strata at Qidong coalmine experienced many tectonic cyclessince their formation.The gas content made by the complicated structural geologic systemat the coalfield is very different, which is obviously higher on the north side of the Weimiaofracture belt than that on the south side and near itself.This thesis discussed the gas occurrenceregularity based on the geometric characteristics of the geological structure andits regional tectonic evolution.This study can provide a foundation for coalfield exploitationand deal with coal and gas outburst.
基金the Major State Basic Research Development Program of China"973"Program(2005CB221501)the General Project of the National Natural Science Foundation of PR China(50574047)
文摘Further evidences show that most mining dynamic disasters are mainly oc- curred nearby NNE and near SN geological structures.In-situ stress measurement in Fuxin basin shows that the orientation of major compressed stress is near EW.At this stress field,geological structures with deferent strike have deferent stress state and dis- place mode.NNE and near SN geological structures are compressed to thrust and come into being high stress zone.NWW and NEE geological structures are tensile to separate and not prone to being low stress zone.NW structure is intervenient of them.So NEE and near SN structures are easy to occurre mining dynamic disasters and NWW and NEE structures is 'safety' comparatively.The mining dynamic disaster is controlled by stress state of geologic structure,which is determined by its strike.
基金Supported by the National Natural Science Foundation of China Enterprise Innovation and Development Joint Fund Project(U19B6003-01)Scientific research and technology development project of China National Petroleum Corporation(2021DJ3103).
文摘Based on seismic and drilling data in the study area,the geological structure and kinematic process of the Termit rift basin were studied using seismic profile interpretation and balanced restoration to find out the dynamic mechanism of the basin.(1)The geological structure of the Termit Basin is represented as a narrow rift basin,with development of series of structural styles in extensional,extensional strike-slip and compressional stress setting.On plane,it is narrow in the north and wide in the south,and transitions from graben to half-graben from north to south;it features a graben controlled by the boundary faults in the north and a fault-overlapped half-graben in the south.(2)Before the Cretaceous,a series of hidden faults developed in the West African rift system,which laid the foundation for the development location and distribution direction of the Termit Basin;during the Cretaceous to Paleogene periods,the basin experienced two phases of rifting in Early Cretaceous and Paleogene,which controlled the initial structure and current structural shape of the basin respectively;during the Neogene to Quaternary,the basin was subjected to weak transformation.(3)In the Precambrian,the Pan-African movement gave rise to a narrow and long weak zone within the African plate,which provided the pre-existing structural conditions for the formation of the Termit Basin.In the Early Cretaceous,affected by the South Atlantic rifting,the Pan African weak zone was reactivated,resulting in the first stage of rifting and the basic structural framework of the Termit Basin.In the Paleogene,affected by the subduction and convergence of the Neo-Tethys Ocean,the African-Arabian plate extended in near E-W trending,and the Termit Basin experienced the second stage of rifting.The oblique extension in this period caused intense structural differentiation,and the current structural pattern of alternate uplifts and depressions took shape gradually.
基金Supported by the Petro China Science and Technology Project(2016E-0601,2019B-0503)China National Science and Technology Major Project(2016ZX05003-001)
文摘Based on the latest geological,seismic,drilling and outcrop data,we studied the geological structure,tectonic evolution history and deformation process of the southwestern Sichuan fold-thrust belt to find out the potential hydrocarbon exploration areas in deep layers.During key tectonic periods,the southwestern Sichuan fold-thrust belt developed some characteristic strata and structural deformation features,including the Pre-Sinian multi-row N-S strike rifts,step-shaped platform-margin structures of Sinian Dengying Formation,the western paleo-uplift in the early stage of Late Paleozoic,the Late Paleozoic–Middle Triassic carbonate platform,foreland slope and forebulge during Late Triassic to Cretaceous,and Cenozoic multi-strike rejuvenated fold-thrusting structures.The fold-thrust belt vertically shows a double-layer structural deformation controlled by the salt layer in the Middle Triassic Leikoupo Formation and the base detachment layer at present.The upper deformation layer develops the NE-SW strike thrusts propagating toward basin in long distance,while the deeper deformation layer had near north-south strike basement-involved folds,which deformed the detachment and thrusting structures formed earlier in the upper layer,with the deformation strength high in south part and weak in north part.The southern part of the fold-thrust belt is characterized by basement-involved fold-thrusts formed late,while the central-northern part is dominated by thin-skin thrusts in the shallow layer.The Wuzhongshan anticlinal belt near piedmont is characterized by over-thrust structure above the salt detachment,where the upper over-thrusting nappe consists of a complicated fold core and front limb of a fault-bend fold,while the deep layer has stable subtle in-situ structures.Favorable exploration strata and areas have been identified both in the upper and deeper deformation layers separated by regional salt detachment,wherein multiple anticlinal structures are targets for exploration.Other potential exploration strata and areas in southwestern Sichuan fold-thrust belt include the deep Sinian and Permian in the Wuzhongshan structure,pre-Sinian rifting sequences and related structures,platform-margin belt of Sinian Dengying Formation,and Indosinian paleo-uplift in the east of the Longquanshan structure.
基金supported by the National Natural Science Foundation of China(Grant No.41730212)the Central Public-interest Scientific Institution Basal Research Fund(Grant No.2021IEF0103)。
文摘As the western boundary of the Sichuan-Yunnan block(SYB),the Red River fault(RRF)is a major fault that controls deep crustal movement and deformation in the southeast margin of the Tibetan Plateau and regulates middle-lower crustal flow.Geophysical data suggest that the RRF is segmented and exhibits distinct variations in seismicity,velocity structure and crustal deformation from north to south.Seismic anisotropy reveals a complex pattern of lateral spatial and vertical stratified distributions.(1)From the perspective of crustal stratification,in the upper crust,the fast wave polarization in the north segment of the RRF is complex and possibly influenced by the Sanjiang lateral collision zone and adjacent faults with varying strikes.The fast wave polarization in the middle segment is in the NW-SE direction,indicating a localized area of closed down or locked up with consistent deformation.And in the south segment,it presents a disordered pattern,signifying complex deep tectonics and stress conditions at the wedged intersection zone.In the middle-lower crust in the north and south segments of the RRF,the azimuthal anisotropy is strong and consistent with the spatial strike of the weak zone characterized by low-velocity and highconductivity.This suggests a connection between the anisotropy and the material migration.(2)In the whole crustal scale,the fast wave directions in two sides of the RRF are consistent with the NW-SE tectonic strike.It indicates that the RRF,as a large fault potentially cutting through the whole crust,strongly controls the surrounding media.(3)In the lithospheric scale,the fast wave polarizations are oriented nearly E-W and independent of the fault strike,consistent with the low P-and S-wave velocity structures and positive radial anisotropy in the upper mantle.The fast wave directions could be related to lithospheric olivine deformation and asthenospheric flow.This paper suggests a decoupling of deformation between the crust and the lithospheric mantle in the south of approximately 26°20′N near the RRF,which can potentially be attributed to the subduction and rollback of the Indian plate.Based on various geophysical observations and inversions,we can determine the detailed anisotropic structure in the crust and the upper mantle around the RRF.Denser geophysical arrays and more accurate records can be used to explore the intricate anisotropy in segmentation and stratification around the RRF,enhancing the understanding of its tectonic significance.
基金The Construction S&T Project of the Department of Transportation of Sichuan Province(Grant No.2023A02)the National Natural Science Foundation of China(No.52109135).
文摘The surrounding geological conditions and supporting structures of underground engineering are often updated during construction,and these updates require repeated numerical modeling.To improve the numerical modeling efficiency of underground engineering,a modularized and parametric modeling cloud server is developed by using Python codes.The basic framework of the cloud server is as follows:input the modeling parameters into the web platform,implement Rhino software and FLAC3D software to model and run simulations in the cloud server,and return the simulation results to the web platform.The modeling program can automatically generate instructions that can run the modeling process in Rhino based on the input modeling parameters.The main modules of the modeling program include modeling the 3D geological structures,the underground engineering structures,and the supporting structures as well as meshing the geometric models.In particular,various cross-sections of underground caverns are crafted as parametricmodules in themodeling program.Themodularized and parametric modeling program is used for a finite element simulation of the underground powerhouse of the Shuangjiangkou Hydropower Station.This complicatedmodel is rapidly generated for the simulation,and the simulation results are reasonable.Thus,this modularized and parametric modeling program is applicable for three-dimensional finite element simulations and analyses.
基金supported in part by the National Natural Science Foundation of China(Grant No.40974069)PetroChina Innovation Foundation(Grant No.2009D-5006-03-01)+1 种基金National Key Basic Research Development Program(GrantNo.2007CB209601)National Major Science and Technology Program(Grant Nos.2008ZX05010-002 and 2008ZX05024-001)
文摘In western China seismic wave fields are very complicated and have low signal to noise ratio.In this paper,we focus on complex wave field research by forward modeling and indicate that density should not be ignored in wave field simulation if the subsurface physical properties are quite different.We use the acoustic wave equation with density in the staggered finite-difference method to simulate the wave fields.For this purpose a complicated geologic structural model with rugged surfaces,near-surface low-velocity layers,and high-velocity outcropping layers was designed.Based on the instantaneous wave field distribution,we analyzed the mechanism forming complex wave fields.The influence of low velocity layers on the wave field is very strong.A strong waveguide occurs between the top and base of a low velocity layer,producing multiples which penetrate into the earth and form strong complex wave fields in addition to reflections from subsurface interfaces.For verifying the correctness of the simulated wave fields,prestack depth migration was performed using different algorithms from the forward modeling.The structure revealed by the stacked migration profile is same as the known structure.
文摘On the basis of field observations, microscopic thin-sections and laboratory data analysis of ten faults in Xuanhan County area, northeastern Sichuan Basin, central China, the internal and megascopic structures and tectonite development characteristics are mainly controlled by the geomechanical quality in brittle formation of the Changxing-Feixianguan Formation. The fluid transportation performance difference between the faults formed by different geomechanics or different structural parts of the same fault are controlled by the mcgascopic structure and tectonite development characteristics. For instance, the extension fault structure consists of a tectonite breccia zone and an extension fracture zone. Good fluid transportation performance zones are the extension fracture zone adjacent to the tectonite breccia zone and the breccia zone formed at the early evolutionary stage. The typical compression fault structure consists of a boulder-clay zone or zones of grinding gravel rock, compression foliation, tectonite lens, and dense fracture development. The dense fracture development zone is the best fluid transporting area at a certain scale of the compression fault, and then the lens, grinding gravel rock zone and compression foliation zones are the worst areas for hydrocarbon migration. The typical tensor-shear fault with a certain scale can be divided into boulder-clay or grinding gravel rock zones of the fault, as well as a pinnate fractures zone and a derivative fractures zone. The grinding gravel rock zone is the worst one for fluid transportation. Because of the fracture mesh connectivity and better penetration ability, the pinnate fractures zone provides the dominant pathway for hydrocarbon vertical migration along the tensor-shear fault.
文摘A structural cross-section constructed across the Zagros Fold-Thrust Belt covering the Abadan Plain, Dezful Embayment, and Izeh Zone applied 2D and 3D seismic data, well data, surface and subsurface geological maps, satellite images and field reconnaissance. Besides validation and modification of the cross-section, restoration allows better understanding of the geology, structural style and stratigraphy of the Zagros basin. In the area of interest, the Hormuz basal decollement and the Gachsaran detachment play the most significant roles in the structural style and deformation of the Zagros belt. More complexity is associated with interval decollements such as Triassic evaporites, Albian shales and Eocene marls. A variety of lithotectonic units and detachment surfaces confound any estimation of shortening, which generally decreases with increasing depth. Deformation completely differs in the Abadan Plain, Dezful Embayment and Izeh Zone because of different sedimentation histories and tectonic evolution; gentle and young structures can be interpreted as pre-collisional structures of the Dezful Embayment before the Late Cretaceous. After the Late Cretaceous, the Mountain Front Fault is the main control of sedimentation and deformation in the Zagros Basin, and this completely characterizes fold style and geometry within the Dezful Embayment and the Izeh Zone.
文摘Gunungsewu is a karst terrain that shows unique geomorphologic phenomena. The area is mainly composed of limestone of Wonosari Formation. Interaction of tectonic, erosion, denudation, and deposition occurred since Miocene period brings about diversity of landforms that supporting the development of this area as a natural laboratory, specific interest, scientific and educational tourisms. In general the geomorphology of Gunungsewu can be classified into two groups of landforms, the first is positive relief and the second is negative relief. The positive relief includes hills of conical, dome, convex-cone, convex and ridge. The negative relief involves cave, shaft, doline, uvala, locva and polje. This diversity is influenced by variation of physical properties of rock composing the landforms, such as hardness, internal friction angle, and geologic structures including thickness and position of bedding plane as well as joint pattern.
基金funded by the National Key Research and Development Program of China(Grant No.2019YFB1504101)the Natural Science Foundation of Hebei Province,China(Grant No.D2021504041)。
文摘As typical carbonate geothermal reservoirs with low porosity in northern China,the Jixianian System in the Xiong’an New Area is the main target for geothermal fluid exploration.The Jixianian System comprises the Gaoyuzhuang,Yangzhuang,Wumishan,Hongshuizhuang,and Tieling formations.The characteristics,formation periods,and controlling factors of reservoir tectonic fractures have been determined based on analyses of outcrops,cores,thin sections,and image logs.The results show that unfilled fractures account for over 87% and most tectonic fractures are high-angle shear fractures with angles concentrated at 40°to 70°and the fracture porosity increases linearly with an increased fracture aperture.Within the same tectonic setting and stress field,the lithology and layer thickness are the dominant factors governing the development of tectonic fractures,which are the most developed in dolomites and thin layers.Tectonic fractures were most likely formed in regions near faults or areas with larger stress gradients.The tectonic fractures in the carbonate geothermal reservoirs are roughly divided into four sets:NNW-SSE and NNE-SSW oriented‘X’-conjugated shear fractures formed from the Paleozoic to the pre-Yanshanian Movement;NE-SW-oriented shear fractures,formed in episode B of the Yanshanian Movement,occurred at the Early Cretaceous;nearly E-W-oriented tensional fractures formed in the late Yanshanian Movement at the Late Cretaceous to Paleogene,and NEE-SW-oriented shear fractures formed during the Himalayan movement.
