Aim To investigate the electrochemical behaviors of Mitomycin C （MC） and its interaction with calf thymus DNA （ctDNA）. Methods The cyclic vohammetry （CV） was carried out at a paraffined graphite electrode. Resul...Aim To investigate the electrochemical behaviors of Mitomycin C （MC） and its interaction with calf thymus DNA （ctDNA）. Methods The cyclic vohammetry （CV） was carried out at a paraffined graphite electrode. Results MC showed a well-defined oxidation-reduction peak. As a result of reaction with ctDNA, the peak current of MC decreased apparently. According to corresponding electrochemical equations, the diffusion coefficient of both free and MC-DNA complex have been determined, and the heterogeneous rate constants were also obtained simultaneously. Conclusion The solid paraffined graphite electrode could be used to estimate parameters of the interaction between DNA and MC, and provide the convenient and sensitive analysis.展开更多
Graphite becomes the prevailing electrode material in electrical discharging machining （EDM）currently.Orthogonal cutting experiments are carried out to study the characteristics of graphite chip formation process.Hi...Graphite becomes the prevailing electrode material in electrical discharging machining （EDM）currently.Orthogonal cutting experiments are carried out to study the characteristics of graphite chip formation process.High speed milling experiments are conducted to study tool wear and cutting forces.The results show that depth of cut has great influence on graphite chip formation.The removal process of graphite in high speed milling is the mutual result of cutting and grinding process. Graphite is prone to cause severe abrasion wear to coated carbide endmills due to its high abrasiveness nature.The major patterns of tool wear are flank wear,rake wear,micro-chipping and breakage. Cutting forces can be reduced by adoption of higher cutting speed,moderate feed per tooth,smaller radial and axial depths of cut,and up cutting.展开更多
As the widely implemented electrode material,graphite has the characteristic of sublimation by the thermal shock of the switching arc,and the produced carbon vapor is easy to condense into carbon powders and deposit i...As the widely implemented electrode material,graphite has the characteristic of sublimation by the thermal shock of the switching arc,and the produced carbon vapor is easy to condense into carbon powders and deposit in the switch.The impact of the type of dilution gas in a mixture of20%oxygen and 80%dilution gas on the sublimation and oxidation characteristics of the graphite electrode is investigated.It is found that when nitrogen dilution gas was replaced by argon,the heat flux to the electrodes decreased,which led to a 63%reduction of graphite sublimation.At the same time,the cooling rate of the arc was slower in argon,which promotes oxidation of the carbon vapor.The residual solid carbon can be reduced by 70%–85%by using argon as the dilution gas.Consequently,it is demonstrated that the stability and working life of the switch could be increased by appropriate selection of the dilution gas.展开更多
A Microbial fuel cell(MFC)with metal free polymer/graphite electrodes(150 mm×150 mm)was constructed.The electrodes with flowing channels,which were different in roughness,were designed.No additional catalyst was ...A Microbial fuel cell(MFC)with metal free polymer/graphite electrodes(150 mm×150 mm)was constructed.The electrodes with flowing channels,which were different in roughness,were designed.No additional catalyst was coated on the electrode,therefore the MFC was cheaper and possessed good durability with high performance.The effect of roughness,K3Fe(CN)6 concentration and sprayed air on the performance of the constructed MFC was investigated.Results showed that the roughness of electrode can significantly affect the performance of MFC.The power density of MFC increased by 1.56 times owing to the arithmetic mean roughness which has increased by 1.41 times.With an increasing K3Fe(CN)6 concentration,the performance of MFC also improves.The MFC with K3Fe(CN)6 only(30 mM)showed the highest power density of 1260 mW/m2,which is by 21.4 times and 1.3 times higher than those of MFCs with spraying air only(59 mW/m2)and with K3Fe(CN)6+air(1005 mW/m2),respectively.This showed that the appropriate concentration of K3Fe(CN)6 can significantly improve the power density,while the air has a negative effect when it is sprayed onto K3Fe(CN)6 catholyte.A coulombic efficiency of 34.2%and an energy efficiency of 13.3%with a COD degradation rate of 73.5%were achieved with MFC using K3Fe(CN)6 only.The overpotentials of MFC were also calculated.It can be seen that both theηohmic andηconcentration were very low as compared to theηactivation,and theηconcentration can be ignored because its effect was less than 3 mV.The theoretical calculation suggested that with an increasing conversion rate of K3Fe(CN)6,the cathode potential decreased and reached 0.31 V at a conversion rate of 0.99.While the anode behaves differently for constant pH and changeable pH as the reaction progresses,which reveals that the buffer solution and removal of protons play an important role in maintaining the anode potential.展开更多
A novel nano-SnO2/graphite electrode has been prepared via polishing procedure to produce active and stable surface. The modified electrode resolves the overlapping voltammetric response of dopamine and ascorbic acid...A novel nano-SnO2/graphite electrode has been prepared via polishing procedure to produce active and stable surface. The modified electrode resolves the overlapping voltammetric response of dopamine and ascorbic acid into two well-defined peaks by 230 mV. The mechanism of discrimination of dopamine from ascorbic acid is discussed. Dopamine and ascorbic acid can be determined simultaneously with the modified electrode. The electrode shows good sensitivity, selectivity and stability.展开更多
A method for determination of epinephrine（EP） in the presence of ascorbic acid （AA） and dopamine （DA） with bare pyrolytic graphite electrodes has been described for the first time. In pH 7.0 phosphate buffer sol...A method for determination of epinephrine（EP） in the presence of ascorbic acid （AA） and dopamine （DA） with bare pyrolytic graphite electrodes has been described for the first time. In pH 7.0 phosphate buffer solution, the linear relationship was observed between the reduction peak current of EP and its concentration over the range from 1×10^-4 to 5×10^-7 mol/L, the related coefficient is 0.9992 （N=8）.展开更多
The catjpdoc polarization characteristics indicate that the presence of a pre-adsorbed surface layer of CoTSPc innibits the reduction of O2 to O2- on an ordinary pyroiytic graphite electrode (OPG) in AN and DMF soluti...The catjpdoc polarization characteristics indicate that the presence of a pre-adsorbed surface layer of CoTSPc innibits the reduction of O2 to O2- on an ordinary pyroiytic graphite electrode (OPG) in AN and DMF solution of 0. 1 mol/L, TEAP, The transfer coefficient a and the heterogeneous rate constant k for this reaction or, OPG with and without pre-adsorbed CoTSPc obtained by rotating disk electrode method were found to be fairly close to thar obtained by cyclic voltammetry. The a remains almost the same, bat the k de creases by a factor of 2-5 with CoTSPc as compared with OPG alone. The possible reason is that the adsorbed CoTSPc as an anion renders the effective potential diffaence less negative, which thus lowers the rase of O2 reduction.展开更多
Currently, landfills are the main method used for the final disposal of urban solid waste. The degradation processes that waste goes through in these sites, alongside rainwater that percolates through them, generate h...Currently, landfills are the main method used for the final disposal of urban solid waste. The degradation processes that waste goes through in these sites, alongside rainwater that percolates through them, generate highly polluting liquids (leachate). In the treatment of leachate, advanced oxidation processes (AOP) can significantly reduce the concentrations of different pollutants. Due to the high documented potential around AOPs, in this study, the effectiveness of anodic oxidation in the removal of the remaining organic load in leachates pretreated in a biological system was evaluated. Graphite electrodes were used as anode and cathode. The efficiency of anodic oxidation, in terms of the removal of chemical oxygen demand (COD) and color, was evaluated under different current densities (7, 12, 17 and 22 mA/cm2) and pH values (3, 4.5 and 6). Under the best conditions found (22 mA/cm2 and pH of 6) and with an oxidation time of 5 hours, a maximum removal of 68% in COD and 91% in color was achieved, which represented a quality in the final effluent of 271 mg/L and 151 Pt-Co in COD and color, respectively. Therefore, considering that graphite is an economic and widely available material, the results obtained show anodic oxidation, with the use of graphite electrodes, as a technically viable alternative as a final purification stage for pretreated leachates.展开更多
Nitrate is the primary water-soluble macronutrient essential for plant growth that is converted from excess fish feeds,fish effluents,and degrading biomaterials on the aquaponic pond floor,and when aquacultural malpra...Nitrate is the primary water-soluble macronutrient essential for plant growth that is converted from excess fish feeds,fish effluents,and degrading biomaterials on the aquaponic pond floor,and when aquacultural malpractices occur,large amounts of it retain in the water system causing increase rate in eutrophication and toxifies fish and aquaculture plants.Recent nitrate sensor prototypes still require performing the additional steps of water sample deionization and dilution and were constructed with expensive materials.In response to the challenge of sensor enhancement and aquaponic water quality monitoring,this study developed sensitive,repeatable,and reproducible screen-printed graphite electrodes on polyvinyl chloride and parchment paper substrates with silver as electrode material and 60:40 graphite powder:nail polish formulated conductive ink for electrical traces,integrated with 9-gene genetic expression model as a function of peak anodic current and electrochemical test time for nitrate concentration prediction that is embedded into low-power Arduino ESP32 for in situ nitrate sensing in aquaponic pond water.Five SPE electrical traces were designed on the two types of substrates.Scanning electron microscopy with energy dispersive X-ray confirmed the electrode surface morphology.Electrochemical cyclic voltammetry using 10 to 100 mg/L KNO3 and water from three-depth regions of the actual pond established the electrochemical test time(10.5 s)and electrode potential(0.135 V)protocol necessary to produce peak current that corresponds to the strength of nitrate ions during redox.The findings from in situ testing revealed that the proposed sensors have strong linear predictions(R2=0.968 MSE=1.659 for nSPEv and R2=0.966 MSE=4.697 for nSPEp)in the range of 10 to 100 mg/L and best detection limit of 3.15μg/L,which are comparable to other sensors of more complex construction.The developed three-electrode electrochemical nitrate sensor confirms that it is reliable for both biosensing in controlled solutions and in situ aquaponic pond water systems.展开更多
The battery management system is employed to monitor the external temperature of the lithium-ion battery in order to detect any potential overheating.However,this outside–in detection method often suffers from a lag ...The battery management system is employed to monitor the external temperature of the lithium-ion battery in order to detect any potential overheating.However,this outside–in detection method often suffers from a lag and is therefore unable to accurately predict the battery’s real-time state.Herein,an inside–out frequency response approach is used to accurately monitor the battery’s state at various temperatures in real-time and correlate it with the solid electrolyte interphase(SEI)evolution of the graphite electrode.The SEI evolution at temperatures of−15,25,60,and 90℃exhibits certain regular characteristics with temperature change.At a temperature of−15℃,the Li^(+)-solvent interaction of lithium-ion slowed down,resulting in a significant reduction in performance.At 25℃,a LiF-rich inorganic SEI was identified as forming,which facilitated lithium-ion transportation.However,high temperatures would induce decomposition of lithium hexafluorophosphate(LiPF_(6))and lithium-ion electrolyte.At the extreme temperature of 90℃,the SEI would be organic-rich,and Li_(x)P_(y)F_(z),a decomposition product of lithium salts,was further oxidized to Li_(x)PO_(y)F_(z),which led to a surge in the charge-transfer resistance at SEI(R_(sei))and a reduction in Coulombic efficiency(CE).This changing relationship can be recorded in real time from the inside out by electrochemical impedance spectroscopy(EIS)testing.This provides a new theoretical basis for the structural evolution of lithium-ion batteries and the regular characterization of EIS.展开更多
Nickel Graphite modified electrode (Ni/GME) was prepared by electrochemical method and degradation of Indigocarmine (IC) dye was carried out. An investigation between the efficiency of degradation by graphite electrod...Nickel Graphite modified electrode (Ni/GME) was prepared by electrochemical method and degradation of Indigocarmine (IC) dye was carried out. An investigation between the efficiency of degradation by graphite electrode and the Ni/graphite modified electrode has been carried out. The different effects of concentration, current density and temperature on the rate of degradation were studied. This study shows that the rate of the degradation is more for Ni doped modified graphite electrode. UV-Visible spectra before and after degradation of the dye solution were observed. The thin film formation of Ni or encapsulated in graphite rod is observed by scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM & EDAX). The instantaneous current effectiveness values of different experimental conditions are evaluated. The anodic oxidation by Ni/ graphite modified electrode showed the complete degradation of aqueous solution indigocarmine, which is confirmed by UV-Visible and chemical oxygen demand (COD) measurements. The dye is converted into CO2, H2O and simpler inorganic salts. The results observed for reuse of modified electrodes indicate that the Ni/graphite modified electrode would be a promising anode for electrochemical degradation of indigocarmine. This method can be applied for the remediation of waste water containing organics, cost-effective and simple.展开更多
The electrochemically induced stress is a key factor that affects the lithium-storage performance of electrode materials.In this study,the origin and evolution of the electrochemically induced stress of the graphite e...The electrochemically induced stress is a key factor that affects the lithium-storage performance of electrode materials.In this study,the origin and evolution of the electrochemically induced stress of the graphite electrode were investigated by in situ experiments and simulations.An in situ optical experiment was performed to observe the electrode color to analyze the concentration and diffusion process of lithium ions inside the graphite electrode.An electrochemical-mechanical coupling model under the same experimental conditions was developed and verified by the experimental lithium concentration,and characterization of the spatiotemporal evolution of the potential,lithium concentration,and stress during the diffusion process was realized.The results showed that lithium intercalation leads to compressive stress,which presents a gradient distribution along the Li+diffusion path,and it exhibits a“piecewise”nonlinear growth trend with increasing lithiation time.In addition,as the potential decreases,the stress increases from slow to fast relative to the lithium-concentration increase,showing the characteristic of stages.The influence of stress on the lithium-storage performance is discussed using the local lithium-intercalation rate and phase-interface migration speed as the key parameters.The lithiation mechanism was analyzed from the perspective of the energy,and it was found that the two factors cause the slow diffusion in the late stage of lithiation,thus affecting the actual lithium-storage performance.This study will enhance the understanding of the electro-chemo-mechanical coupling mechanism and provide guidance for enhancing stress-regulated battery performance.展开更多
This paper focuses on the effects of compaction on the microstructure of graphite-resin electrochemical treatment electrodes. This was with a view to understanding the relationships between forming parameters and some...This paper focuses on the effects of compaction on the microstructure of graphite-resin electrochemical treatment electrodes. This was with a view to understanding the relationships between forming parameters and some performance-limiting structural parameters of the electrode. Graphite resin electrodes were developed from graphite rods reclaimed from primary cells. The rods were crushed to powder of various particle sizes and compressed into the graphite-resin electrodes. The microstructure of the graphite electrode was observed, effects of compaction force and particles sizes distribution on the microstructure of the electrodes were observed. SEM/EDX revealed that there is a lack of homogeneity in the distribution of micro-constituents, with compositional variations differing at the various spots. However, there is a prevalence of carbon and oxygen at almost all the spots. This tends to confirm the even distribution of the elements throughout the material. The pores in the electrodes were noticed to be uniformly sized and permeate throughout the entire structure of the electrode. These pores serve to increase the surface area of these electrodes and promote the adsorption of environmental pollutants.展开更多
The world’s first three-graphite electrode direct current(DC)plasma heating system(2500 kW)was successfully put into production on the 50-t tundish of a two-strand slab caster.The single metallic torch plasma tundish...The world’s first three-graphite electrode direct current(DC)plasma heating system(2500 kW)was successfully put into production on the 50-t tundish of a two-strand slab caster.The single metallic torch plasma tundish heaters were reviewed.In addition,the induction heating system was also estimated.The three-graphite electrode DC plasma tundish heating(PTH)system does not require any electrode to be fitted to the tundish.Five electrodes can be used to realize uniform and fast heating of the six-strand tundish.Heating with high power can effectively eliminate the steep temperature drop of the molten steel in the tundish during ladle change-over.The system has turned out to be very reliable,simple,and maintenance-free.The heating rate is high within 0.5 to 2.0℃/min.Some heats with ultra-low superheat(2.6-11.0℃)were observed,and the molten steels were successfully cast by the powerful heating capacity and good control performance of the system in the practical production.It can be concluded that continuous casting with superheat of 5-10℃in the tundish was fully realistic with PTH.展开更多
Graphitic materials with intercalated sites are considered as the mostly used positive electrode materials in nonaqueous Al batteries.Unlike the small-size cations,the intercalation/de-intercalation of large-size anio...Graphitic materials with intercalated sites are considered as the mostly used positive electrode materials in nonaqueous Al batteries.Unlike the small-size cations,the intercalation/de-intercalation of large-size anions into/out of graphite would induce large volume expansion and micro-structure reconfiguration,leading to unexpected coulombic efficiency in the full cells(<95%within initial several cycles).展开更多
Resource-and energy-efficient biomass exploitation for green graphite production is one of the most effective strategies for satisfying graphite demand while minimizing energy consumption and carbon emissions.This stu...Resource-and energy-efficient biomass exploitation for green graphite production is one of the most effective strategies for satisfying graphite demand while minimizing energy consumption and carbon emissions.This study investigated green graphite production from biomass waste and its applications to establish a green graphite industry.Biomass pyrolysis and catalytic graphitization of biochar were studied first to produce green graphite.The optimized green graphite exhibited a reversible capacity of 264 mA h/g and 97%capacity retention over 100 cycles in a half-cell.Green graphite electrodes with a resistivity lower than 5μΩm were fabricated by using organic fraction bio-oil as a green binder.Other green graphite applications,including printing,conductive printing,pencils,and refractories,were also achieved.The overall process of graphite anode and electrode synthesis from biomass waste and short-rotation energy crops was modeled.Approx.95 kg of battery graphite or 109 kg of metallurgical graphite electrodes can be produced per ton of biomass with low primary energy consumption and carbon footprint.Prominently,the modeling result and life cycle assessment demonstrated that,for the production of battery graphite from biomass waste,net-negative-CO_(2)emissions(−0.57 kg CO_(2)-eq/kg graphite powders)with net-negative-primary energy consumption(−28.31 MJ/kg graphite powders)was achieved.展开更多
Vanadium flow battery （VFB） is a fast going and promising system for large-scale stationary energy stor- age. However, drawbacks such as low power density and narrow temperature window caused by poor catalytic activ...Vanadium flow battery （VFB） is a fast going and promising system for large-scale stationary energy stor- age. However, drawbacks such as low power density and narrow temperature window caused by poor catalytic activity of graphite felt （GF） electrodes limit its worldwide application. In this paper, bismuth, as a low-cost, no-toxic and high-activity electrocatalyst, is used to modify the thermal activated GF （TGF） via a facile hydrothermal method. Bismuth can effectively inhibit the side reaction of hydrogen evolution in wide temperature range, while promoting the V2＋/V3＋ redox reaction. As a result, the VFB assembled with Bi/TGF as negative electrode demonstrates outstanding rate performance under the current density up to 400 mAcm-2, as well as a long-term stability over 600 charging/discharging cycles at a high cur- rent density of 150mA cm-2. Moreover, it also shows excellent temperature adaptability from -10 ℃ to 50 ℃ and high durability for life test at the temperature of 50 ℃.展开更多
The electropolymerized film of amaranth was prepared on the surface of graphite pencil electrode（GPE） using cyclic voltammetric technique.This poly（amaranth） film coated electrode exhibited an excellent electrocat...The electropolymerized film of amaranth was prepared on the surface of graphite pencil electrode（GPE） using cyclic voltammetric technique.This poly（amaranth） film coated electrode exhibited an excellent electrocatalytic activity towards the detection of dopamine（DA） in the presence of uric acid（UA） in 0.2 mol/L phosphate buffer solution at pH 7.0.The effect of interference study was carried out using differential pulse voltammetric technique.The poly（amaranth） modified GPE was applied for the detection of DA in dopamine injection with satisfactory results.展开更多
This research investigates a capacitive deionization method for salinity reduction in a batch reactor as a new approach for desalination.Reductions of cost and energy compared with conventional desalination methods ar...This research investigates a capacitive deionization method for salinity reduction in a batch reactor as a new approach for desalination.Reductions of cost and energy compared with conventional desalination methods are the significant advantages of this approach.In this research,experiments were performed with a pair of graphite bipolar electrodes that were coated with a one-gram activated carbon solution.After completing preliminary tests,the impacts of four parameters on electrical conductivity reduction,including(1)the initial concentration of feed solution,(2)the duration of the tests,(3)the applied voltage,and(4)the pH of the solution,were examined.The results show that the maximum efficiency of electrical conductivity reduction in this laboratory-scale reactor is about 55%.Furthermore,the effects of the initial concentration of feed solution are more significant than the other parameters.Thus,using the capacitive deionization method for water desalination with low and moderate salt concentrations(i.e.,brackish water)is proposed as an affordable method.Compared with conventional desalination methods,capacitive deionization is not only more efficient but also potentially more environmentally friendly.展开更多
The current work focuses on the development of a sensitive and selective electrochemical device based on a graphite screen printed electrode modified with Dy2（WO4）3 nanoparticles（DWO/SPE） for the analysis of epine...The current work focuses on the development of a sensitive and selective electrochemical device based on a graphite screen printed electrode modified with Dy2（WO4）3 nanoparticles（DWO/SPE） for the analysis of epinephrine in samples also containing acetylcholine. The study proves that the sensor has excellent electron-mediating behavior in the oxidation of epinephrine in a 0.1 mol/L phosphate buffer solution（PBS）（pH 7.0）. The application of the DWO/SPE in differential pulse voltammetry（DPV） is found to lead to distinct response for the oxidation of epinephrine and acetylcholine, with the potentials of the epinephrine and acetylcholine peaks（△Ep） to be 550 mV apart. The detection limits of the method for epinephrine and acetylcholine are 0.5 and 0.7 μmol/L（S/N = 3） and the responses are found to be linear in the concentration ranges of 1.0-900.0 μmol/L and 1.0-1200.0 μmol/L in a PBS buffer（pH = 7.0）respectively. The modified electrode was used for the detection of epinephrine and acetylcholine in real samples and found to produce satisfactory results. These results can be a proof that Dy2（WO4）3 nanoparticles can find promising applications in electrochemical sensors to be used for the analysis of（bio）chemical species.展开更多
文摘Aim To investigate the electrochemical behaviors of Mitomycin C （MC） and its interaction with calf thymus DNA （ctDNA）. Methods The cyclic vohammetry （CV） was carried out at a paraffined graphite electrode. Results MC showed a well-defined oxidation-reduction peak. As a result of reaction with ctDNA, the peak current of MC decreased apparently. According to corresponding electrochemical equations, the diffusion coefficient of both free and MC-DNA complex have been determined, and the heterogeneous rate constants were also obtained simultaneously. Conclusion The solid paraffined graphite electrode could be used to estimate parameters of the interaction between DNA and MC, and provide the convenient and sensitive analysis.
基金Selected from Proceedings of the 7th International Conference on Frontiers of Design and Manufacturing(ICFDM'2006)This project is supported by National Natural Science Foundation of China(No.50605008).
文摘Graphite becomes the prevailing electrode material in electrical discharging machining （EDM）currently.Orthogonal cutting experiments are carried out to study the characteristics of graphite chip formation process.High speed milling experiments are conducted to study tool wear and cutting forces.The results show that depth of cut has great influence on graphite chip formation.The removal process of graphite in high speed milling is the mutual result of cutting and grinding process. Graphite is prone to cause severe abrasion wear to coated carbide endmills due to its high abrasiveness nature.The major patterns of tool wear are flank wear,rake wear,micro-chipping and breakage. Cutting forces can be reduced by adoption of higher cutting speed,moderate feed per tooth,smaller radial and axial depths of cut,and up cutting.
基金supported by National Natural Science Foundation of China(Nos.51777082 and 52077091)Chinese Scholarship Council(No.201906160101)。
文摘As the widely implemented electrode material,graphite has the characteristic of sublimation by the thermal shock of the switching arc,and the produced carbon vapor is easy to condense into carbon powders and deposit in the switch.The impact of the type of dilution gas in a mixture of20%oxygen and 80%dilution gas on the sublimation and oxidation characteristics of the graphite electrode is investigated.It is found that when nitrogen dilution gas was replaced by argon,the heat flux to the electrodes decreased,which led to a 63%reduction of graphite sublimation.At the same time,the cooling rate of the arc was slower in argon,which promotes oxidation of the carbon vapor.The residual solid carbon can be reduced by 70%–85%by using argon as the dilution gas.Consequently,it is demonstrated that the stability and working life of the switch could be increased by appropriate selection of the dilution gas.
基金The authors would like to thank the Federal Ministry of Education and Research(Bundesministerium für Bildung und Forschung),BMBF,Germany,for funding parts of this study under the contract No.02WER1317D.
文摘A Microbial fuel cell(MFC)with metal free polymer/graphite electrodes(150 mm×150 mm)was constructed.The electrodes with flowing channels,which were different in roughness,were designed.No additional catalyst was coated on the electrode,therefore the MFC was cheaper and possessed good durability with high performance.The effect of roughness,K3Fe(CN)6 concentration and sprayed air on the performance of the constructed MFC was investigated.Results showed that the roughness of electrode can significantly affect the performance of MFC.The power density of MFC increased by 1.56 times owing to the arithmetic mean roughness which has increased by 1.41 times.With an increasing K3Fe(CN)6 concentration,the performance of MFC also improves.The MFC with K3Fe(CN)6 only(30 mM)showed the highest power density of 1260 mW/m2,which is by 21.4 times and 1.3 times higher than those of MFCs with spraying air only(59 mW/m2)and with K3Fe(CN)6+air(1005 mW/m2),respectively.This showed that the appropriate concentration of K3Fe(CN)6 can significantly improve the power density,while the air has a negative effect when it is sprayed onto K3Fe(CN)6 catholyte.A coulombic efficiency of 34.2%and an energy efficiency of 13.3%with a COD degradation rate of 73.5%were achieved with MFC using K3Fe(CN)6 only.The overpotentials of MFC were also calculated.It can be seen that both theηohmic andηconcentration were very low as compared to theηactivation,and theηconcentration can be ignored because its effect was less than 3 mV.The theoretical calculation suggested that with an increasing conversion rate of K3Fe(CN)6,the cathode potential decreased and reached 0.31 V at a conversion rate of 0.99.While the anode behaves differently for constant pH and changeable pH as the reaction progresses,which reveals that the buffer solution and removal of protons play an important role in maintaining the anode potential.
文摘A novel nano-SnO2/graphite electrode has been prepared via polishing procedure to produce active and stable surface. The modified electrode resolves the overlapping voltammetric response of dopamine and ascorbic acid into two well-defined peaks by 230 mV. The mechanism of discrimination of dopamine from ascorbic acid is discussed. Dopamine and ascorbic acid can be determined simultaneously with the modified electrode. The electrode shows good sensitivity, selectivity and stability.
基金supported by the National Natural Science Foundation of China(No.20335030)The Teaching and Research Award Program for 0utstanding Young Teachers in Higher Education Institutions of M0E ER,C.,the Natural Science Foundation of Gansu(No.3ZS051-A25-023)Key Laboratory of Ploymer Materials of Gansu Province
文摘A method for determination of epinephrine（EP） in the presence of ascorbic acid （AA） and dopamine （DA） with bare pyrolytic graphite electrodes has been described for the first time. In pH 7.0 phosphate buffer solution, the linear relationship was observed between the reduction peak current of EP and its concentration over the range from 1×10^-4 to 5×10^-7 mol/L, the related coefficient is 0.9992 （N=8）.
文摘The catjpdoc polarization characteristics indicate that the presence of a pre-adsorbed surface layer of CoTSPc innibits the reduction of O2 to O2- on an ordinary pyroiytic graphite electrode (OPG) in AN and DMF solution of 0. 1 mol/L, TEAP, The transfer coefficient a and the heterogeneous rate constant k for this reaction or, OPG with and without pre-adsorbed CoTSPc obtained by rotating disk electrode method were found to be fairly close to thar obtained by cyclic voltammetry. The a remains almost the same, bat the k de creases by a factor of 2-5 with CoTSPc as compared with OPG alone. The possible reason is that the adsorbed CoTSPc as an anion renders the effective potential diffaence less negative, which thus lowers the rase of O2 reduction.
文摘Currently, landfills are the main method used for the final disposal of urban solid waste. The degradation processes that waste goes through in these sites, alongside rainwater that percolates through them, generate highly polluting liquids (leachate). In the treatment of leachate, advanced oxidation processes (AOP) can significantly reduce the concentrations of different pollutants. Due to the high documented potential around AOPs, in this study, the effectiveness of anodic oxidation in the removal of the remaining organic load in leachates pretreated in a biological system was evaluated. Graphite electrodes were used as anode and cathode. The efficiency of anodic oxidation, in terms of the removal of chemical oxygen demand (COD) and color, was evaluated under different current densities (7, 12, 17 and 22 mA/cm2) and pH values (3, 4.5 and 6). Under the best conditions found (22 mA/cm2 and pH of 6) and with an oxidation time of 5 hours, a maximum removal of 68% in COD and 91% in color was achieved, which represented a quality in the final effluent of 271 mg/L and 151 Pt-Co in COD and color, respectively. Therefore, considering that graphite is an economic and widely available material, the results obtained show anodic oxidation, with the use of graphite electrodes, as a technically viable alternative as a final purification stage for pretreated leachates.
基金the Philippines’Department of Science and Technology-Engineering Research and Development for Technology program,the Intelligent Systems Laboratory and the iNano Laboratory of the De La Salle University,the Fundação para a Ciência e a Tecnologia(FCT)for funding MARE(Marine and Environmental Sciences Centre,UIDB/04292/2020 and UIDB/04292/2020)ARNET(Aquatic Research Infrastructure Network Associated Laboratory,LA/P/0069/2020)B.Duarte researcher contract(CEECIND/00511/2017).
文摘Nitrate is the primary water-soluble macronutrient essential for plant growth that is converted from excess fish feeds,fish effluents,and degrading biomaterials on the aquaponic pond floor,and when aquacultural malpractices occur,large amounts of it retain in the water system causing increase rate in eutrophication and toxifies fish and aquaculture plants.Recent nitrate sensor prototypes still require performing the additional steps of water sample deionization and dilution and were constructed with expensive materials.In response to the challenge of sensor enhancement and aquaponic water quality monitoring,this study developed sensitive,repeatable,and reproducible screen-printed graphite electrodes on polyvinyl chloride and parchment paper substrates with silver as electrode material and 60:40 graphite powder:nail polish formulated conductive ink for electrical traces,integrated with 9-gene genetic expression model as a function of peak anodic current and electrochemical test time for nitrate concentration prediction that is embedded into low-power Arduino ESP32 for in situ nitrate sensing in aquaponic pond water.Five SPE electrical traces were designed on the two types of substrates.Scanning electron microscopy with energy dispersive X-ray confirmed the electrode surface morphology.Electrochemical cyclic voltammetry using 10 to 100 mg/L KNO3 and water from three-depth regions of the actual pond established the electrochemical test time(10.5 s)and electrode potential(0.135 V)protocol necessary to produce peak current that corresponds to the strength of nitrate ions during redox.The findings from in situ testing revealed that the proposed sensors have strong linear predictions(R2=0.968 MSE=1.659 for nSPEv and R2=0.966 MSE=4.697 for nSPEp)in the range of 10 to 100 mg/L and best detection limit of 3.15μg/L,which are comparable to other sensors of more complex construction.The developed three-electrode electrochemical nitrate sensor confirms that it is reliable for both biosensing in controlled solutions and in situ aquaponic pond water systems.
基金supported by Natural Science Foundation of Chongqing(No.2022NSCQ-MSX4268)National Natural Science Foundation of China(No.22209075).
文摘The battery management system is employed to monitor the external temperature of the lithium-ion battery in order to detect any potential overheating.However,this outside–in detection method often suffers from a lag and is therefore unable to accurately predict the battery’s real-time state.Herein,an inside–out frequency response approach is used to accurately monitor the battery’s state at various temperatures in real-time and correlate it with the solid electrolyte interphase(SEI)evolution of the graphite electrode.The SEI evolution at temperatures of−15,25,60,and 90℃exhibits certain regular characteristics with temperature change.At a temperature of−15℃,the Li^(+)-solvent interaction of lithium-ion slowed down,resulting in a significant reduction in performance.At 25℃,a LiF-rich inorganic SEI was identified as forming,which facilitated lithium-ion transportation.However,high temperatures would induce decomposition of lithium hexafluorophosphate(LiPF_(6))and lithium-ion electrolyte.At the extreme temperature of 90℃,the SEI would be organic-rich,and Li_(x)P_(y)F_(z),a decomposition product of lithium salts,was further oxidized to Li_(x)PO_(y)F_(z),which led to a surge in the charge-transfer resistance at SEI(R_(sei))and a reduction in Coulombic efficiency(CE).This changing relationship can be recorded in real time from the inside out by electrochemical impedance spectroscopy(EIS)testing.This provides a new theoretical basis for the structural evolution of lithium-ion batteries and the regular characterization of EIS.
文摘Nickel Graphite modified electrode (Ni/GME) was prepared by electrochemical method and degradation of Indigocarmine (IC) dye was carried out. An investigation between the efficiency of degradation by graphite electrode and the Ni/graphite modified electrode has been carried out. The different effects of concentration, current density and temperature on the rate of degradation were studied. This study shows that the rate of the degradation is more for Ni doped modified graphite electrode. UV-Visible spectra before and after degradation of the dye solution were observed. The thin film formation of Ni or encapsulated in graphite rod is observed by scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM & EDAX). The instantaneous current effectiveness values of different experimental conditions are evaluated. The anodic oxidation by Ni/ graphite modified electrode showed the complete degradation of aqueous solution indigocarmine, which is confirmed by UV-Visible and chemical oxygen demand (COD) measurements. The dye is converted into CO2, H2O and simpler inorganic salts. The results observed for reuse of modified electrodes indicate that the Ni/graphite modified electrode would be a promising anode for electrochemical degradation of indigocarmine. This method can be applied for the remediation of waste water containing organics, cost-effective and simple.
基金supported by the National Natural Science Foundation of China(Grant Nos.12102296 and 11890680)the China Postdoctoral Science Foundation(Grant No.2022T150471)。
文摘The electrochemically induced stress is a key factor that affects the lithium-storage performance of electrode materials.In this study,the origin and evolution of the electrochemically induced stress of the graphite electrode were investigated by in situ experiments and simulations.An in situ optical experiment was performed to observe the electrode color to analyze the concentration and diffusion process of lithium ions inside the graphite electrode.An electrochemical-mechanical coupling model under the same experimental conditions was developed and verified by the experimental lithium concentration,and characterization of the spatiotemporal evolution of the potential,lithium concentration,and stress during the diffusion process was realized.The results showed that lithium intercalation leads to compressive stress,which presents a gradient distribution along the Li+diffusion path,and it exhibits a“piecewise”nonlinear growth trend with increasing lithiation time.In addition,as the potential decreases,the stress increases from slow to fast relative to the lithium-concentration increase,showing the characteristic of stages.The influence of stress on the lithium-storage performance is discussed using the local lithium-intercalation rate and phase-interface migration speed as the key parameters.The lithiation mechanism was analyzed from the perspective of the energy,and it was found that the two factors cause the slow diffusion in the late stage of lithiation,thus affecting the actual lithium-storage performance.This study will enhance the understanding of the electro-chemo-mechanical coupling mechanism and provide guidance for enhancing stress-regulated battery performance.
文摘This paper focuses on the effects of compaction on the microstructure of graphite-resin electrochemical treatment electrodes. This was with a view to understanding the relationships between forming parameters and some performance-limiting structural parameters of the electrode. Graphite resin electrodes were developed from graphite rods reclaimed from primary cells. The rods were crushed to powder of various particle sizes and compressed into the graphite-resin electrodes. The microstructure of the graphite electrode was observed, effects of compaction force and particles sizes distribution on the microstructure of the electrodes were observed. SEM/EDX revealed that there is a lack of homogeneity in the distribution of micro-constituents, with compositional variations differing at the various spots. However, there is a prevalence of carbon and oxygen at almost all the spots. This tends to confirm the even distribution of the elements throughout the material. The pores in the electrodes were noticed to be uniformly sized and permeate throughout the entire structure of the electrode. These pores serve to increase the surface area of these electrodes and promote the adsorption of environmental pollutants.
基金supported by the National Natural Science Foundation of China(Grant No.52074030).
文摘The world’s first three-graphite electrode direct current(DC)plasma heating system(2500 kW)was successfully put into production on the 50-t tundish of a two-strand slab caster.The single metallic torch plasma tundish heaters were reviewed.In addition,the induction heating system was also estimated.The three-graphite electrode DC plasma tundish heating(PTH)system does not require any electrode to be fitted to the tundish.Five electrodes can be used to realize uniform and fast heating of the six-strand tundish.Heating with high power can effectively eliminate the steep temperature drop of the molten steel in the tundish during ladle change-over.The system has turned out to be very reliable,simple,and maintenance-free.The heating rate is high within 0.5 to 2.0℃/min.Some heats with ultra-low superheat(2.6-11.0℃)were observed,and the molten steels were successfully cast by the powerful heating capacity and good control performance of the system in the practical production.It can be concluded that continuous casting with superheat of 5-10℃in the tundish was fully realistic with PTH.
基金This work was supported by the National Key R&D Program of China(Grant No.2018YFB0104400)the National Natural Science Foundation of China(Nos.51725401 and 51874019)the Beijing Municipal Science and Technology Commission(No.Z191100002719007).
文摘Graphitic materials with intercalated sites are considered as the mostly used positive electrode materials in nonaqueous Al batteries.Unlike the small-size cations,the intercalation/de-intercalation of large-size anions into/out of graphite would induce large volume expansion and micro-structure reconfiguration,leading to unexpected coulombic efficiency in the full cells(<95%within initial several cycles).
基金Bio+programEnergimyndigheten-The Swedish Energy Agency,Grant/Award Number:2021-00048Teknikomrade 23。
文摘Resource-and energy-efficient biomass exploitation for green graphite production is one of the most effective strategies for satisfying graphite demand while minimizing energy consumption and carbon emissions.This study investigated green graphite production from biomass waste and its applications to establish a green graphite industry.Biomass pyrolysis and catalytic graphitization of biochar were studied first to produce green graphite.The optimized green graphite exhibited a reversible capacity of 264 mA h/g and 97%capacity retention over 100 cycles in a half-cell.Green graphite electrodes with a resistivity lower than 5μΩm were fabricated by using organic fraction bio-oil as a green binder.Other green graphite applications,including printing,conductive printing,pencils,and refractories,were also achieved.The overall process of graphite anode and electrode synthesis from biomass waste and short-rotation energy crops was modeled.Approx.95 kg of battery graphite or 109 kg of metallurgical graphite electrodes can be produced per ton of biomass with low primary energy consumption and carbon footprint.Prominently,the modeling result and life cycle assessment demonstrated that,for the production of battery graphite from biomass waste,net-negative-CO_(2)emissions(−0.57 kg CO_(2)-eq/kg graphite powders)with net-negative-primary energy consumption(−28.31 MJ/kg graphite powders)was achieved.
基金financial support from the National Natural Science Foundation of China (No. 21576154)the Open Fund of The State Key Laboratory of Refractories and Metallurgy (No. G201809)the Shenzhen Basic Research Project (Nos. JCYJ20170412170756603 and JCYJ20170307152754218)
文摘Vanadium flow battery （VFB） is a fast going and promising system for large-scale stationary energy stor- age. However, drawbacks such as low power density and narrow temperature window caused by poor catalytic activity of graphite felt （GF） electrodes limit its worldwide application. In this paper, bismuth, as a low-cost, no-toxic and high-activity electrocatalyst, is used to modify the thermal activated GF （TGF） via a facile hydrothermal method. Bismuth can effectively inhibit the side reaction of hydrogen evolution in wide temperature range, while promoting the V2＋/V3＋ redox reaction. As a result, the VFB assembled with Bi/TGF as negative electrode demonstrates outstanding rate performance under the current density up to 400 mAcm-2, as well as a long-term stability over 600 charging/discharging cycles at a high cur- rent density of 150mA cm-2. Moreover, it also shows excellent temperature adaptability from -10 ℃ to 50 ℃ and high durability for life test at the temperature of 50 ℃.
文摘The electropolymerized film of amaranth was prepared on the surface of graphite pencil electrode（GPE） using cyclic voltammetric technique.This poly（amaranth） film coated electrode exhibited an excellent electrocatalytic activity towards the detection of dopamine（DA） in the presence of uric acid（UA） in 0.2 mol/L phosphate buffer solution at pH 7.0.The effect of interference study was carried out using differential pulse voltammetric technique.The poly（amaranth） modified GPE was applied for the detection of DA in dopamine injection with satisfactory results.
文摘This research investigates a capacitive deionization method for salinity reduction in a batch reactor as a new approach for desalination.Reductions of cost and energy compared with conventional desalination methods are the significant advantages of this approach.In this research,experiments were performed with a pair of graphite bipolar electrodes that were coated with a one-gram activated carbon solution.After completing preliminary tests,the impacts of four parameters on electrical conductivity reduction,including(1)the initial concentration of feed solution,(2)the duration of the tests,(3)the applied voltage,and(4)the pH of the solution,were examined.The results show that the maximum efficiency of electrical conductivity reduction in this laboratory-scale reactor is about 55%.Furthermore,the effects of the initial concentration of feed solution are more significant than the other parameters.Thus,using the capacitive deionization method for water desalination with low and moderate salt concentrations(i.e.,brackish water)is proposed as an affordable method.Compared with conventional desalination methods,capacitive deionization is not only more efficient but also potentially more environmentally friendly.
文摘The current work focuses on the development of a sensitive and selective electrochemical device based on a graphite screen printed electrode modified with Dy2（WO4）3 nanoparticles（DWO/SPE） for the analysis of epinephrine in samples also containing acetylcholine. The study proves that the sensor has excellent electron-mediating behavior in the oxidation of epinephrine in a 0.1 mol/L phosphate buffer solution（PBS）（pH 7.0）. The application of the DWO/SPE in differential pulse voltammetry（DPV） is found to lead to distinct response for the oxidation of epinephrine and acetylcholine, with the potentials of the epinephrine and acetylcholine peaks（△Ep） to be 550 mV apart. The detection limits of the method for epinephrine and acetylcholine are 0.5 and 0.7 μmol/L（S/N = 3） and the responses are found to be linear in the concentration ranges of 1.0-900.0 μmol/L and 1.0-1200.0 μmol/L in a PBS buffer（pH = 7.0）respectively. The modified electrode was used for the detection of epinephrine and acetylcholine in real samples and found to produce satisfactory results. These results can be a proof that Dy2（WO4）3 nanoparticles can find promising applications in electrochemical sensors to be used for the analysis of（bio）chemical species.
