Identification of security risk factors for small reservoirs is the basis for implementation of early warning systems.The manner of identification of the factors for small reservoirs is of practical significance when ...Identification of security risk factors for small reservoirs is the basis for implementation of early warning systems.The manner of identification of the factors for small reservoirs is of practical significance when data are incomplete.The existing grey relational models have some disadvantages in measuring the correlation between categorical data sequences.To this end,this paper introduces a new grey relational model to analyze heterogeneous data.In this study,a set of security risk factors for small reservoirs was first constructed based on theoretical analysis,and heterogeneous data of these factors were recorded as sequences.The sequences were regarded as random variables,and the information entropy and conditional entropy between sequences were measured to analyze the relational degree between risk factors.Then,a new grey relational analysis model for heterogeneous data was constructed,and a comprehensive security risk factor identification method was developed.A case study of small reservoirs in Guangxi Zhuang Autonomous Region in China shows that the model constructed in this study is applicable to security risk factor identification for small reservoirs with heterogeneous and sparse data.展开更多
We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were use...We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.展开更多
Natural fibre reinforced polymer composite(NFRPC)materials are gaining popularity in the modern world due to their eco-friendliness,lightweight nature,life-cycle superiority,biodegradability,low cost,and noble mechani...Natural fibre reinforced polymer composite(NFRPC)materials are gaining popularity in the modern world due to their eco-friendliness,lightweight nature,life-cycle superiority,biodegradability,low cost,and noble mechanical properties.Due to the wide variety of materials available that have comparable attributes and satisfy the requirements of the product design specification,material selection has become a crucial component of design for engineers.This paper discusses the study’s findings in choosing the suitable thermoplastic matrices of Natural Fibre Composites for Cyclist Helmet utilising the DMAIC,and GRA approaches.The results are based on integrating two decision methods implemented utilising two distinct decision-making approaches:qualitative and quantitative.This study suggested thermoplastic polyethylene as a particularly ideal matrix in composite cyclist helmets during the selection process for the best thermoplastic matrices material using the 6σtechnique,with the decision based on the highest performance,the lightest weight,and the most environmentally friendly criteria.The DMAIC and GRA approach significantly influenced the material selection process by offering different tools for each phase.In the future study,selection technique may have been more exhaustive if more information from other factors had been added.展开更多
This paper proposes a multi-criteria decision-making (MCGDM) method based on the improved single-valued neutrosophic Hamacher weighted averaging (ISNHWA) operator and grey relational analysis (GRA) to overcome the lim...This paper proposes a multi-criteria decision-making (MCGDM) method based on the improved single-valued neutrosophic Hamacher weighted averaging (ISNHWA) operator and grey relational analysis (GRA) to overcome the limitations of present methods based on aggregation operators. First, the limitations of several existing single-valued neutrosophic weighted averaging aggregation operators (i.e. , the single-valued neutrosophic weighted averaging, single-valued neutrosophic weighted algebraic averaging, single-valued neutrosophic weighted Einstein averaging, single-valued neutrosophic Frank weighted averaging, and single-valued neutrosophic Hamacher weighted averaging operators), which can produce some indeterminate terms in the aggregation process, are discussed. Second, an ISNHWA operator was developed to overcome the limitations of existing operators. Third, the properties of the proposed operator, including idempotency, boundedness, monotonicity, and commutativity, were analyzed. Application examples confirmed that the ISNHWA operator and the proposed MCGDM method are rational and effective. The proposed improved ISNHWA operator and MCGDM method can overcome the indeterminate results in some special cases in existing single-valued neutrosophic weighted averaging aggregation operators and MCGDM methods.展开更多
Chemical composition(moisture,protein,starch,ash,fiber,fat),vitamins(vitamin C,vitamin B1,vitamin B2),total polyphenol content,antioxidant capacity,minerals,and amino acid of 14 potato cultivars in China were evaluate...Chemical composition(moisture,protein,starch,ash,fiber,fat),vitamins(vitamin C,vitamin B1,vitamin B2),total polyphenol content,antioxidant capacity,minerals,and amino acid of 14 potato cultivars in China were evaluated.The results indicated that all parameters varied significantly among different potato cultivars.The total starch,crude protein and fat content ranged between 57.42–67.83%,10.88–14.10% and 0.10–0.73% dry weight(DW),respectively.Moreover,the consumption of potato increased remarkably the dietary intake of vitamins,K,Mn and Cu.In addition,the chemical score of amino acid varied considerably between different cultivars,which ranged from 54(Neida 3 and Neida 41) to 71(Neida 34).Grey relational analysis(GRA) indicated that Neida 26 exhibited the most comprehensive nutritional values among potato cultivars,followed by Neida 42.Different potato flours had a significant effect on the quality parameters of potato steamed bread(PSB),Neida 26 and Neida 34 were more suitable for making PSB.展开更多
The urgent need to develop customized functional products only possible by 3D printing had realized when faced with the unavailability of medical devices like surgical instruments during the coronavirus-19 disease and...The urgent need to develop customized functional products only possible by 3D printing had realized when faced with the unavailability of medical devices like surgical instruments during the coronavirus-19 disease and the ondemand necessity to perform surgery during space missions.Biopolymers have recently been the most appropriate option for fabricating surgical instruments via 3D printing in terms of cheaper and faster processing.Among all 3D printing techniques,fused deposition modelling(FDM)is a low-cost and more rapid printing technique.This article proposes the fabrication of surgical instruments,namely,forceps and hemostat using the fused deposition modeling(FDM)process.Excellent mechanical properties are the only indicator to judge the quality of the functional parts.The mechanical properties of FDM-processed parts depend on various process parameters.These parameters are layer height,infill pattern,top/bottom pattern,number of top/bottom layers,infill density,flow,number of shells,printing temperature,build plate temperature,printing speed,and fan speed.Tensile strength and modulus of elasticity are chosen as evaluation indexes to ascertain the mechanical properties of polylactic acid(PLA)parts printed by FDM.The experiments have performed through Taguchi’s L27orthogonal array(OA).Variance analysis(ANOVA)ascertains the significance of the process parameters and their percent contributions to the evaluation indexes.Finally,as a multiobjective optimization technique,grey relational analysis(GRA)obtains an optimal set of FDM process parameters to fabricate the best parts with comprehensive mechanical properties.Scanning electron microscopy(SEM)examines the types of defects and strong bonding between rasters.The proposed research ensures the successful fabrication of functional surgical tools with substantial ultimate tensile strength(42.6 MPa)and modulus of elasticity(3274 MPa).展开更多
The purpose of this paper is to optimize the process parameter to get the better mechanical properties of friction stir welded AM20 magnesium alloy using Taguchi Grey relational analysis(GRA).The considered process pa...The purpose of this paper is to optimize the process parameter to get the better mechanical properties of friction stir welded AM20 magnesium alloy using Taguchi Grey relational analysis(GRA).The considered process parameters are welding speed,tool rotation speed,shoulder diameter and plunging depth.The experiments were carried out by using Taguchi's L18 factorial design of experiment.The processes parameters were optimized and ranked the parameters based on the GRA.The percentage influence of each process parameter on the weld quality was also quantified.A validation experimental run was conducted using optimal process condition,which was obtained from the analysis,to show the improvement in mechanical properties of the joint.This study also shows the feasibility of the GRA with Taguchi technique for improvement in welding quality of magnesium alloy.展开更多
The concept, fundamental theory, analytical steps and formulae of grey relational analysis (GRA)-a new statistical method or multifactorial analysis in the field of medicine were introduced. GRA of grouping sequence t...The concept, fundamental theory, analytical steps and formulae of grey relational analysis (GRA)-a new statistical method or multifactorial analysis in the field of medicine were introduced. GRA of grouping sequence that is applied to medical study was built by the authors. An example was given to demonstrate it. The superiority of GRA was recounted briefly.展开更多
The strength of the mould cavity in sand casting is very much significant to attain high-quality castings. Optimization of green sand process parameters plays a vital role in minimizing casting defects. In the present...The strength of the mould cavity in sand casting is very much significant to attain high-quality castings. Optimization of green sand process parameters plays a vital role in minimizing casting defects. In the present research work, the effect of process parameters such as AFS grain fineness number, water, molasses, bentonite, fly ash, and ramming, and their levels on the resultant mould properties were investigated and optimized using Taguchi based grey relational analysis. The Taguchi L18 orthogonal array and analysis of variance(ANOVA) were used. The quality characteristics viz., green compression strength, permeability, bulk density, mould hardness and shatter index of green sand mould were optimized using grey relational grade, based on the experiments designed using Taguchi's Design of Experiments. ANOVA analysis indicated that water content is the most influential parameter followed by bentonite, and degree of ramming that contributes to the quality characteristics. The results are confirmed by calculating confidence intervals, which lies within the interval limits. Finally, microstructure observations and X-ray diffraction analysis have been performed for the optimal sand parametric combination. Results show that presence of maximum amount of SiO_2, which might be the reason for enhancement of the physical properties of the sand.展开更多
This study aims to optimize the input parameters such as mass fraction and particle size of SiC along with depth of cut,feed and cutting speed in the milling of Al5059/SiC/MoS2.The hybrid metal matrix composites are g...This study aims to optimize the input parameters such as mass fraction and particle size of SiC along with depth of cut,feed and cutting speed in the milling of Al5059/SiC/MoS2.The hybrid metal matrix composites are generally fabricated by reinforcing of different sizes(10,20,40 μm)of SiC with aluminium at a different levels(5%,10%& 15%)whereas the MoS2 addition is fixed as 2%.The effect of each control factor on response variables are analyzed through Taguchi S/N ratio method.Also,the most significant method for prediction of response parameters is satisfied by ANN model than the regression model.Analysis of variance(ANOVA)results envisage that mass fraction of SiC,feed rate is the most domineering factor on response variable.展开更多
[Objective] The aim was to study the main rainfall factors influencing runoff and sediment in the sloping farmland with different plants in the central south of Shandong Province.[Method] Through grey relational analy...[Objective] The aim was to study the main rainfall factors influencing runoff and sediment in the sloping farmland with different plants in the central south of Shandong Province.[Method] Through grey relational analysis,the effects of different rainfall factors on runoff and sediment with different plants in the central south of Shandong were studied.[Result] In the sloping farmland with different plants,the effects of rainfall factors on runoff and sediment weren't consistent.Rainfall was the dominant influencing factor of runoff,but PI30 had the greatest influence on runoff in natural grassland.Meanwhile,rainfall intensity was the main influencing factor of sediment,but PI had the greatest influence on sediment in Astragalus adsurgens Pall.plot.The compound factor had the minimal influence on runoff and sediment in Arachis hypogaea plot and natural grassland.In A.adsurgens Pall.plot,rainfall intensity had the minimal impact on runoff,but the compound factor had the least effect on sediment.[Conclusion] The study could provide theoretical references for the comprehensive control of slope soil erosion,the optimum utilization and sustainable development of land.展开更多
A grey model with periodic term for sea-level analysis is presented.The present model keeps some advantages of tea GM (1, 1 )model, which well reflects the trend of sea-level changes and gives out the change rate as w...A grey model with periodic term for sea-level analysis is presented.The present model keeps some advantages of tea GM (1, 1 )model, which well reflects the trend of sea-level changes and gives out the change rate as well as the acceleration of sea level conveniently.level conveniently.In addition, the present model can reproduce the periodic phenomena of sealevel, hence, it overcomes the shortcomings of the GM(1,1) model that is unsuitable for forecasting monthly mean sealevel with apparent periodicity, and its prediction accuracy is improved.The present model is used to analyse Guangxi coast sea level,the results show that the rise rates of relative sea level at Beihai, Weizhou and Bailongwei are 1 .67,2 .51 and 0.89 mm/a respectively, the relative sea level at Shitoubu has a falling trend with a rate of 0. 5- 1 .0 mm/a, the rise rate of eustatic sea level along the Guangxi coast is 2 .0 mm/a. In comparison with the model with a lineartrend term plus a periodic term, the simulation accuracies of both models are about the same.展开更多
Crashworthiness and lightweight optimization design of the crash box are studied in this paper. For the initial model, a physical test was performed to verify the model. Then, a parametric model using mesh morphing te...Crashworthiness and lightweight optimization design of the crash box are studied in this paper. For the initial model, a physical test was performed to verify the model. Then, a parametric model using mesh morphing technology is used to optimize and decrease the maximum collision force (MCF) and increase specific energy absorption (SEA) while ensure mass is not increased. Because MCF and SEA are two conflicting objectives, grey relational analysis (GRA) and principal component analysis (PCA) are employed for design optimization of the crash box. Furthermore, multi-objective analysis can convert to a single objective using the grey relational grade (GRG) simultaneously, hence, the proposed method can obtain the optimal combination of design parameters for the crash box. It can be concluded that the proposed method decreases the MCF and weight to 16.7% and 29.4% respectively, while increasing SEA to 16.4%. Meanwhile, the proposed method in comparison to the conventional NSGA-Ⅱ method, reduces the time cost by 103%. Hence, the proposed method can be properly applied to the optimization of the crash box.展开更多
The grey relational analysis( GRA) was used to evaluate the 10 sugarcane lines by 13 main agronomic characters. The result showed that the grey correlation degree of self-cultivated lines GNY08- 320(0. 7502),GNY08- 33...The grey relational analysis( GRA) was used to evaluate the 10 sugarcane lines by 13 main agronomic characters. The result showed that the grey correlation degree of self-cultivated lines GNY08- 320(0. 7502),GNY08- 336(0. 7409),GNY08- 186(0. 7369),and GNY08- 225(0. 7277) were higher than ROC22(CK),so the 4 lines can be further tested,and the others were worse than CK that should be further observed or eliminated.展开更多
Glass is the precious material evidence of the trade of the early Silk Road. The ancient glass was easily affected by the environmental impact and weathering, and the change of composition ratios affected the correct ...Glass is the precious material evidence of the trade of the early Silk Road. The ancient glass was easily affected by the environmental impact and weathering, and the change of composition ratios affected the correct judgment of its category. In this paper, mathematical models and methods such as Chi-square test, weighted average method, principal component analysis, cluster analysis, binary classification model and grey correlation analysis were used comprehensively to analyze the data of sample glass products combined with their categories. The results showed that the weathered high-potassium glass could be divided into 12, 9, 10 and 27, 7, 22 and so on.展开更多
The influence of particle migration induced by groundwater source heat pump( GWSHP) operation on aquifer parameters was theoretically analyzed. Then the sensitivity analysis of different influencing factors,which infl...The influence of particle migration induced by groundwater source heat pump( GWSHP) operation on aquifer parameters was theoretically analyzed. Then the sensitivity analysis of different influencing factors,which influenced aquifer parameters with GWSHP operation,was evaluated by using grey relational analysis method through a case study. The present study indicated that the erosion parameter, hydraulic conductivity and initial concentration were critical influencing factors which affected the aquifer parameters and the suitability of GWSHP. It also indicated that the discharge of single well should be controlled and the diameter of single well should be selected appropriately in order to decrease particle migration.展开更多
In this investigation, optimization of tribological performance parameters of Al-6061T6 alloy reinforced with SiC (15% by weight) and Al2O3 (15% by weight) particulates having particle size of 37 μm each has been pre...In this investigation, optimization of tribological performance parameters of Al-6061T6 alloy reinforced with SiC (15% by weight) and Al2O3 (15% by weight) particulates having particle size of 37 μm each has been presented. The wear and frictional properties of the hybrid metal matrix composites have been studied by performing dry sliding wear test using pin-on-disc wear tester. A L27 orthogonal array is selected for the analysis of the data. From the test results it is observed that sliding distance has the significant contribution in controlling the friction and wear behaviour of hybrid composites. A confirmation test is also carried out to verify the accuracy of the results obtained through the optimization. In addition an optical micrograph test is also performed on the wear tracks to study the wear mechanism.展开更多
Grey relational analysis is one of the most important methods in water quality evaluation system. As the traditional grey relational analysis has the defects of homogenization in static resolution ratio, small discrim...Grey relational analysis is one of the most important methods in water quality evaluation system. As the traditional grey relational analysis has the defects of homogenization in static resolution ratio, small discrimination in correlation degree, and low precision in the weight of impact factors, this paper proposed an advanced grey relational analysis that used dynamic resolution ratio and comprehensive evaluation indicators. This method has been applied in the MIS software which monitors and evaluates the water quality in the lakes of the Four-Lake Basin. Compared with the traditional grey relational analysis and the cluster-factor analysis, this method could effectively enhance the reliability and accuracy of the results.展开更多
This paper mainly describes a new approach to optimizing of the cutting glass fiber with multiple performance characteristics, based on reliability analysis, Taguchi and Grey methods. During the cutting process, the s...This paper mainly describes a new approach to optimizing of the cutting glass fiber with multiple performance characteristics, based on reliability analysis, Taguchi and Grey methods. During the cutting process, the speed, the volume and the cutting load are optimized cutting parameters when the performance characteristics, which include Weibull modulus and blade wear, are taken into consideration. In this paper, optimization with multiple performance characteristics is found to be the highest cutting speed and the smallest cutting volume, and the medium cutting load. An analysis of the variance of the blade wear indicates that the cutting speed (47.21%), the cutting volume (14.62%) and the cutting load (12.20%) are the most significant parameters in the cutting process of glass fibers. In summary, the most optimal cutting parameter should be A3B1C2. The results of experiments have shown that the multiple performance characteristics of cutting glass fiber are improved effectively through this approach.展开更多
Given a non-equidistant sequence or an equidistant series with one or more outliers, a grey interpolation approach considering the time lags is established for producing the missing data or correcting the abnormal val...Given a non-equidistant sequence or an equidistant series with one or more outliers, a grey interpolation approach considering the time lags is established for producing the missing data or correcting the abnormal values. To accomplish this, a new grey incidence model, called the grey dynamic incidence model GDIM(t), is constructed for determining whether the factors are effective to the known factor and what the time lag is between a useful factor and the specified sequence. Based on the results of the GDIM(t) model, two programming problems are designed to obtain the upper and lower bounds of the unknown or abnormal values which are regarded as grey numbers. The solutions based on the particle swarm optimization(PSO) for the nonlinear programming problems are given. To explain how it can be used in practice, this new grey interpolation approach is applied to correct an abnormal value in the sequence of an agriculture environment problem.展开更多
基金supported by the National Nature Science Foundation of China(Grant No.71401052)the National Social Science Foundation of China(Grant No.17BGL156)the Key Project of the National Social Science Foundation of China(Grant No.14AZD024)
文摘Identification of security risk factors for small reservoirs is the basis for implementation of early warning systems.The manner of identification of the factors for small reservoirs is of practical significance when data are incomplete.The existing grey relational models have some disadvantages in measuring the correlation between categorical data sequences.To this end,this paper introduces a new grey relational model to analyze heterogeneous data.In this study,a set of security risk factors for small reservoirs was first constructed based on theoretical analysis,and heterogeneous data of these factors were recorded as sequences.The sequences were regarded as random variables,and the information entropy and conditional entropy between sequences were measured to analyze the relational degree between risk factors.Then,a new grey relational analysis model for heterogeneous data was constructed,and a comprehensive security risk factor identification method was developed.A case study of small reservoirs in Guangxi Zhuang Autonomous Region in China shows that the model constructed in this study is applicable to security risk factor identification for small reservoirs with heterogeneous and sparse data.
文摘We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.
文摘Natural fibre reinforced polymer composite(NFRPC)materials are gaining popularity in the modern world due to their eco-friendliness,lightweight nature,life-cycle superiority,biodegradability,low cost,and noble mechanical properties.Due to the wide variety of materials available that have comparable attributes and satisfy the requirements of the product design specification,material selection has become a crucial component of design for engineers.This paper discusses the study’s findings in choosing the suitable thermoplastic matrices of Natural Fibre Composites for Cyclist Helmet utilising the DMAIC,and GRA approaches.The results are based on integrating two decision methods implemented utilising two distinct decision-making approaches:qualitative and quantitative.This study suggested thermoplastic polyethylene as a particularly ideal matrix in composite cyclist helmets during the selection process for the best thermoplastic matrices material using the 6σtechnique,with the decision based on the highest performance,the lightest weight,and the most environmentally friendly criteria.The DMAIC and GRA approach significantly influenced the material selection process by offering different tools for each phase.In the future study,selection technique may have been more exhaustive if more information from other factors had been added.
文摘This paper proposes a multi-criteria decision-making (MCGDM) method based on the improved single-valued neutrosophic Hamacher weighted averaging (ISNHWA) operator and grey relational analysis (GRA) to overcome the limitations of present methods based on aggregation operators. First, the limitations of several existing single-valued neutrosophic weighted averaging aggregation operators (i.e. , the single-valued neutrosophic weighted averaging, single-valued neutrosophic weighted algebraic averaging, single-valued neutrosophic weighted Einstein averaging, single-valued neutrosophic Frank weighted averaging, and single-valued neutrosophic Hamacher weighted averaging operators), which can produce some indeterminate terms in the aggregation process, are discussed. Second, an ISNHWA operator was developed to overcome the limitations of existing operators. Third, the properties of the proposed operator, including idempotency, boundedness, monotonicity, and commutativity, were analyzed. Application examples confirmed that the ISNHWA operator and the proposed MCGDM method are rational and effective. The proposed improved ISNHWA operator and MCGDM method can overcome the indeterminate results in some special cases in existing single-valued neutrosophic weighted averaging aggregation operators and MCGDM methods.
基金financed by the National Key R&D program of China (2016YFE0133600 and 2017YFD0400401)the Collaborative Innovation Task of CAAS (CAASXTCX2016005)the Public Welfare Industry (Agriculture) Research Project,Ministry of Agriculture of China (201503001-2)
文摘Chemical composition(moisture,protein,starch,ash,fiber,fat),vitamins(vitamin C,vitamin B1,vitamin B2),total polyphenol content,antioxidant capacity,minerals,and amino acid of 14 potato cultivars in China were evaluated.The results indicated that all parameters varied significantly among different potato cultivars.The total starch,crude protein and fat content ranged between 57.42–67.83%,10.88–14.10% and 0.10–0.73% dry weight(DW),respectively.Moreover,the consumption of potato increased remarkably the dietary intake of vitamins,K,Mn and Cu.In addition,the chemical score of amino acid varied considerably between different cultivars,which ranged from 54(Neida 3 and Neida 41) to 71(Neida 34).Grey relational analysis(GRA) indicated that Neida 26 exhibited the most comprehensive nutritional values among potato cultivars,followed by Neida 42.Different potato flours had a significant effect on the quality parameters of potato steamed bread(PSB),Neida 26 and Neida 34 were more suitable for making PSB.
文摘The urgent need to develop customized functional products only possible by 3D printing had realized when faced with the unavailability of medical devices like surgical instruments during the coronavirus-19 disease and the ondemand necessity to perform surgery during space missions.Biopolymers have recently been the most appropriate option for fabricating surgical instruments via 3D printing in terms of cheaper and faster processing.Among all 3D printing techniques,fused deposition modelling(FDM)is a low-cost and more rapid printing technique.This article proposes the fabrication of surgical instruments,namely,forceps and hemostat using the fused deposition modeling(FDM)process.Excellent mechanical properties are the only indicator to judge the quality of the functional parts.The mechanical properties of FDM-processed parts depend on various process parameters.These parameters are layer height,infill pattern,top/bottom pattern,number of top/bottom layers,infill density,flow,number of shells,printing temperature,build plate temperature,printing speed,and fan speed.Tensile strength and modulus of elasticity are chosen as evaluation indexes to ascertain the mechanical properties of polylactic acid(PLA)parts printed by FDM.The experiments have performed through Taguchi’s L27orthogonal array(OA).Variance analysis(ANOVA)ascertains the significance of the process parameters and their percent contributions to the evaluation indexes.Finally,as a multiobjective optimization technique,grey relational analysis(GRA)obtains an optimal set of FDM process parameters to fabricate the best parts with comprehensive mechanical properties.Scanning electron microscopy(SEM)examines the types of defects and strong bonding between rasters.The proposed research ensures the successful fabrication of functional surgical tools with substantial ultimate tensile strength(42.6 MPa)and modulus of elasticity(3274 MPa).
基金The authors acknowledge the Science and Engineering Research Board,Department of Science and Technology,India,for funding the present research work[grant number SERB/F/2767/2012-13].
文摘The purpose of this paper is to optimize the process parameter to get the better mechanical properties of friction stir welded AM20 magnesium alloy using Taguchi Grey relational analysis(GRA).The considered process parameters are welding speed,tool rotation speed,shoulder diameter and plunging depth.The experiments were carried out by using Taguchi's L18 factorial design of experiment.The processes parameters were optimized and ranked the parameters based on the GRA.The percentage influence of each process parameter on the weld quality was also quantified.A validation experimental run was conducted using optimal process condition,which was obtained from the analysis,to show the improvement in mechanical properties of the joint.This study also shows the feasibility of the GRA with Taguchi technique for improvement in welding quality of magnesium alloy.
文摘The concept, fundamental theory, analytical steps and formulae of grey relational analysis (GRA)-a new statistical method or multifactorial analysis in the field of medicine were introduced. GRA of grouping sequence that is applied to medical study was built by the authors. An example was given to demonstrate it. The superiority of GRA was recounted briefly.
基金financially supported by the National Institute of Technology,Manipur,India
文摘The strength of the mould cavity in sand casting is very much significant to attain high-quality castings. Optimization of green sand process parameters plays a vital role in minimizing casting defects. In the present research work, the effect of process parameters such as AFS grain fineness number, water, molasses, bentonite, fly ash, and ramming, and their levels on the resultant mould properties were investigated and optimized using Taguchi based grey relational analysis. The Taguchi L18 orthogonal array and analysis of variance(ANOVA) were used. The quality characteristics viz., green compression strength, permeability, bulk density, mould hardness and shatter index of green sand mould were optimized using grey relational grade, based on the experiments designed using Taguchi's Design of Experiments. ANOVA analysis indicated that water content is the most influential parameter followed by bentonite, and degree of ramming that contributes to the quality characteristics. The results are confirmed by calculating confidence intervals, which lies within the interval limits. Finally, microstructure observations and X-ray diffraction analysis have been performed for the optimal sand parametric combination. Results show that presence of maximum amount of SiO_2, which might be the reason for enhancement of the physical properties of the sand.
文摘This study aims to optimize the input parameters such as mass fraction and particle size of SiC along with depth of cut,feed and cutting speed in the milling of Al5059/SiC/MoS2.The hybrid metal matrix composites are generally fabricated by reinforcing of different sizes(10,20,40 μm)of SiC with aluminium at a different levels(5%,10%& 15%)whereas the MoS2 addition is fixed as 2%.The effect of each control factor on response variables are analyzed through Taguchi S/N ratio method.Also,the most significant method for prediction of response parameters is satisfied by ANN model than the regression model.Analysis of variance(ANOVA)results envisage that mass fraction of SiC,feed rate is the most domineering factor on response variable.
基金Supported by Project of Shandong Water Resources Department" Study on the Mechanism and Comprehensive Control Benefit of Soil Erosion in the Typical Eroded Area of Shandong"
文摘[Objective] The aim was to study the main rainfall factors influencing runoff and sediment in the sloping farmland with different plants in the central south of Shandong Province.[Method] Through grey relational analysis,the effects of different rainfall factors on runoff and sediment with different plants in the central south of Shandong were studied.[Result] In the sloping farmland with different plants,the effects of rainfall factors on runoff and sediment weren't consistent.Rainfall was the dominant influencing factor of runoff,but PI30 had the greatest influence on runoff in natural grassland.Meanwhile,rainfall intensity was the main influencing factor of sediment,but PI had the greatest influence on sediment in Astragalus adsurgens Pall.plot.The compound factor had the minimal influence on runoff and sediment in Arachis hypogaea plot and natural grassland.In A.adsurgens Pall.plot,rainfall intensity had the minimal impact on runoff,but the compound factor had the least effect on sediment.[Conclusion] The study could provide theoretical references for the comprehensive control of slope soil erosion,the optimum utilization and sustainable development of land.
文摘A grey model with periodic term for sea-level analysis is presented.The present model keeps some advantages of tea GM (1, 1 )model, which well reflects the trend of sea-level changes and gives out the change rate as well as the acceleration of sea level conveniently.level conveniently.In addition, the present model can reproduce the periodic phenomena of sealevel, hence, it overcomes the shortcomings of the GM(1,1) model that is unsuitable for forecasting monthly mean sealevel with apparent periodicity, and its prediction accuracy is improved.The present model is used to analyse Guangxi coast sea level,the results show that the rise rates of relative sea level at Beihai, Weizhou and Bailongwei are 1 .67,2 .51 and 0.89 mm/a respectively, the relative sea level at Shitoubu has a falling trend with a rate of 0. 5- 1 .0 mm/a, the rise rate of eustatic sea level along the Guangxi coast is 2 .0 mm/a. In comparison with the model with a lineartrend term plus a periodic term, the simulation accuracies of both models are about the same.
基金Supported by the National Key Research and Development Project(2016YFB0101601)
文摘Crashworthiness and lightweight optimization design of the crash box are studied in this paper. For the initial model, a physical test was performed to verify the model. Then, a parametric model using mesh morphing technology is used to optimize and decrease the maximum collision force (MCF) and increase specific energy absorption (SEA) while ensure mass is not increased. Because MCF and SEA are two conflicting objectives, grey relational analysis (GRA) and principal component analysis (PCA) are employed for design optimization of the crash box. Furthermore, multi-objective analysis can convert to a single objective using the grey relational grade (GRG) simultaneously, hence, the proposed method can obtain the optimal combination of design parameters for the crash box. It can be concluded that the proposed method decreases the MCF and weight to 16.7% and 29.4% respectively, while increasing SEA to 16.4%. Meanwhile, the proposed method in comparison to the conventional NSGA-Ⅱ method, reduces the time cost by 103%. Hence, the proposed method can be properly applied to the optimization of the crash box.
基金Supported by Key Scientific and Technological Planning Project of Guangxi(Gui Ke Neng 1347013-7)Ability Construction Project for Innovation Plan of Chongzuo City of Guangxi(2012cxjhB001)Public Welfare Foundation Project of Guangxi Department of Finance(NYRKS201205 & XJYJS201309)
文摘The grey relational analysis( GRA) was used to evaluate the 10 sugarcane lines by 13 main agronomic characters. The result showed that the grey correlation degree of self-cultivated lines GNY08- 320(0. 7502),GNY08- 336(0. 7409),GNY08- 186(0. 7369),and GNY08- 225(0. 7277) were higher than ROC22(CK),so the 4 lines can be further tested,and the others were worse than CK that should be further observed or eliminated.
文摘Glass is the precious material evidence of the trade of the early Silk Road. The ancient glass was easily affected by the environmental impact and weathering, and the change of composition ratios affected the correct judgment of its category. In this paper, mathematical models and methods such as Chi-square test, weighted average method, principal component analysis, cluster analysis, binary classification model and grey correlation analysis were used comprehensively to analyze the data of sample glass products combined with their categories. The results showed that the weathered high-potassium glass could be divided into 12, 9, 10 and 27, 7, 22 and so on.
基金the Fundamental Research Funds for the Central Universities,China(NO.DL12BB09)Science and Technology Research Projects in Heilongjiang Provincial Department of Education,China(NO.12533012)
文摘The influence of particle migration induced by groundwater source heat pump( GWSHP) operation on aquifer parameters was theoretically analyzed. Then the sensitivity analysis of different influencing factors,which influenced aquifer parameters with GWSHP operation,was evaluated by using grey relational analysis method through a case study. The present study indicated that the erosion parameter, hydraulic conductivity and initial concentration were critical influencing factors which affected the aquifer parameters and the suitability of GWSHP. It also indicated that the discharge of single well should be controlled and the diameter of single well should be selected appropriately in order to decrease particle migration.
文摘In this investigation, optimization of tribological performance parameters of Al-6061T6 alloy reinforced with SiC (15% by weight) and Al2O3 (15% by weight) particulates having particle size of 37 μm each has been presented. The wear and frictional properties of the hybrid metal matrix composites have been studied by performing dry sliding wear test using pin-on-disc wear tester. A L27 orthogonal array is selected for the analysis of the data. From the test results it is observed that sliding distance has the significant contribution in controlling the friction and wear behaviour of hybrid composites. A confirmation test is also carried out to verify the accuracy of the results obtained through the optimization. In addition an optical micrograph test is also performed on the wear tracks to study the wear mechanism.
基金Supported by Natural Science Foundation of China(41372155)
文摘Grey relational analysis is one of the most important methods in water quality evaluation system. As the traditional grey relational analysis has the defects of homogenization in static resolution ratio, small discrimination in correlation degree, and low precision in the weight of impact factors, this paper proposed an advanced grey relational analysis that used dynamic resolution ratio and comprehensive evaluation indicators. This method has been applied in the MIS software which monitors and evaluates the water quality in the lakes of the Four-Lake Basin. Compared with the traditional grey relational analysis and the cluster-factor analysis, this method could effectively enhance the reliability and accuracy of the results.
文摘This paper mainly describes a new approach to optimizing of the cutting glass fiber with multiple performance characteristics, based on reliability analysis, Taguchi and Grey methods. During the cutting process, the speed, the volume and the cutting load are optimized cutting parameters when the performance characteristics, which include Weibull modulus and blade wear, are taken into consideration. In this paper, optimization with multiple performance characteristics is found to be the highest cutting speed and the smallest cutting volume, and the medium cutting load. An analysis of the variance of the blade wear indicates that the cutting speed (47.21%), the cutting volume (14.62%) and the cutting load (12.20%) are the most significant parameters in the cutting process of glass fibers. In summary, the most optimal cutting parameter should be A3B1C2. The results of experiments have shown that the multiple performance characteristics of cutting glass fiber are improved effectively through this approach.
基金supported by the National Natural Science Foundation of China(7137109871071077)+4 种基金Funding of Jiangsu Innovation Program for Graduate Education(KYZZ15 0093)Fundamental Research Funds for the Central Universities(2017301)Natural Science Fund Project of Colleges in Jiangsu Province(16KJD120001)Funding for Major Project of Jiangsu Social Science(16GLA001)Funding for Outstanding Doctoral Dissertation in Nanjing University of Aeronautics and Astronautics(BCXJ15-10)
文摘Given a non-equidistant sequence or an equidistant series with one or more outliers, a grey interpolation approach considering the time lags is established for producing the missing data or correcting the abnormal values. To accomplish this, a new grey incidence model, called the grey dynamic incidence model GDIM(t), is constructed for determining whether the factors are effective to the known factor and what the time lag is between a useful factor and the specified sequence. Based on the results of the GDIM(t) model, two programming problems are designed to obtain the upper and lower bounds of the unknown or abnormal values which are regarded as grey numbers. The solutions based on the particle swarm optimization(PSO) for the nonlinear programming problems are given. To explain how it can be used in practice, this new grey interpolation approach is applied to correct an abnormal value in the sequence of an agriculture environment problem.