Low carbon development of blast furnaces is one of the key technological directions in the current development of ironmaking.Owing to the differences in the physical and chemical properties of hydrogen and carbon,hydr...Low carbon development of blast furnaces is one of the key technological directions in the current development of ironmaking.Owing to the differences in the physical and chemical properties of hydrogen and carbon,hydrogen-rich media entering a blast furnace will change the heat distribution,thus affecting the stability of production.Accordingly,a heat distribution model was proposed to study the temperature distribution in a blast furnace,simultaneously considering gas-solid heat exchange,slag and iron melting,and chemical reactions.The model was used to analyze the temperature distribution of a 2300 m^(3) blast furnace and was verified via comparison with actual production data.Subsequently,the effects of the injection rate of hydrogen-rich media,H2 concentration,and oxygen enrichment rate of the blast on the temperature distribution were investigated.Results indicated that the increase in the injection rate of the hydrogen-rich media decreased the amount of direct reduction and led to an increase in the furnace temperature.Furthermore,an increase in the oxygen enrichment rate led to a decrease in the furnace temperature,but could reduce the solid fuel ratio,while the change in H2 concentration had less effect on the temperature distribution.The combination of hydrogen-rich media injection and the increase in the oxygen enrichment rate would help to adjust the temperature distribution to the same level as the conventional blast furnace conditions.展开更多
Maintaining suitable temperature level around tomato in the greenhouse is essential for the high-quality production.However,in summer,the temperature level around the tomato is usually unclear except using a high-prec...Maintaining suitable temperature level around tomato in the greenhouse is essential for the high-quality production.However,in summer,the temperature level around the tomato is usually unclear except using a high-precision temperature imager.To solve this problem,thermal performance of 3D(three-dimensional)tomato model built based on SolidWorks was investigated by the computational fluid dynamics(CFD)simulations.To assess the effect of temperature distribution around the tomato,a simplified 3D tomato numerical model was firstly validated by a set of field measurement data.The light intensity and indoor ventilation were regarded as the mainly environment factors in the Venlo greenhouse,thermal stratification around tomatoes at different time of day was further studied.The numerical results illustrated the different temperature distribution around tomato body under different radiation intensity.It was found that ventilation could obviously adjust the temperature gradient around the tomato,and alleviate high temperature effect particularly in summer.Suitable ventilation could create a suitable thermal environment for the tomato growth.This study clearly demonstrated 3D temperature distribution around tomatoes,which is beneficial to provide the reference for accurate detection of 3D tomato temperature and appropriate thermal environment design.展开更多
The latitude-altitude distributions of radiative fluxes and heating rates are investigated by utilizing CloudSat satellite data over China during summer. The Tibetan Plateau causes the downward shortwave fluxes of the...The latitude-altitude distributions of radiative fluxes and heating rates are investigated by utilizing CloudSat satellite data over China during summer. The Tibetan Plateau causes the downward shortwave fluxes of the lower atmosphere over central China to be smaller than the fluxes over southern and northern China by generating more clouds. The existence of a larger quantity of clouds over central China reflects a greater amount of solar radiation back into space. The vertical gradients of upward shortwave radiative fluxes in the atmosphere below 8 km are greater than those above 8 km. The latitudinal-altitude distributions of downward longwave radiative fluxes show a slantwise decreasing trend from low latitudes to high latitudes that gradually weaken in the downward direction. The upward longwave radiative fluxes also weaken in the upward direction but with larger gradients. The maximum heating rates by solar radiation and cooling rates by longwave infrared radiation are located over 28 40°N at 7 8 km mean sea level (MSL), and they are larger than the rates in the northern and southern regions. The heating and cooling rates match well both vertically and geographically.展开更多
电-热综合能源系统(integrated electricity and heat system,IEHS)可以有效促进可再生能源消纳。构建区域供热系统精细化模型与合理的可再生能源不确定性出力模型是调度IEHS的两个难点。该文首先提出计及可变流量调节模式的IEHS条件分...电-热综合能源系统(integrated electricity and heat system,IEHS)可以有效促进可再生能源消纳。构建区域供热系统精细化模型与合理的可再生能源不确定性出力模型是调度IEHS的两个难点。该文首先提出计及可变流量调节模式的IEHS条件分布鲁棒优化调度模型,主要有两点改进:通过构建基于修正模糊集的条件分布鲁棒模型建模可再生能源预测误差与其预测出力信息之间的内在依赖性,提升调度结果安全性与最优性;基于流体能量守恒方程与一阶隐式迎风格式建立可变流量调节模式下的IEHS调度模型,以期充分挖掘区域供热系统的灵活性,促进可再生能源消纳。所构建的IEHS调度模型为含有大量非线性约束的条件分布鲁棒模型,难以直接求解。对此,通过对偶理论与条件风险价值近似方法将条件分布鲁棒模型转化为含非线性约束的确定性模型,并提出自适应McCormick算法用以求解非线性约束。通过不同规模案例仿真表明,所提模型能够降低IEHS的调度成本,所提算法在保证可行性的条件下快速求出问题的近似最优解,最优间隙小于千分之一。展开更多
In order for economically viable distributed generation systems for apartment buildings to spread, it is essential to develop an efficient and low-cost heat supply system. We have developed a new eogeneration system c...In order for economically viable distributed generation systems for apartment buildings to spread, it is essential to develop an efficient and low-cost heat supply system. We have developed a new eogeneration system called the Neighboring Cogeneration system （NCG）. The key concept of this system is to install a heat accumulator with a hot water supply and a room heating function at each household and to connect different households by a single loop of hot water pipe. As a result, time leveling of the heat supply and heat transferring among households becomes possible. Thus, the costs of the pipe and the heat source equipment decrease. Furthermore, because all of the heat accumulators store heat, the total heat storage capacity is large enough for cogeneration to generate exhaust heat according to the electricity demand and with a high operating rate. In this paper, we report the results of the NCG system for 7 lived-in households. The controlling system worked efficiently. All of the households were able to use hot water without any difficulties. Further, we report the results of the energy saving effect of the NCG system for 50 lived-in households by means of a simulation based on the experimental results for NEXT21.展开更多
Grinding is a crucial process in machining workpieces because it plays a vital role in achieving the desired precision and surface quality.However,a significant technical challenge in grinding is the potential increas...Grinding is a crucial process in machining workpieces because it plays a vital role in achieving the desired precision and surface quality.However,a significant technical challenge in grinding is the potential increase in temperature due to high specific energy,which can lead to surface thermal damage.Therefore,ensuring control over the surface integrity of workpieces during grinding becomes a critical concern.This necessitates the development of temperature field models that consider various parameters,such as workpiece materials,grinding wheels,grinding parameters,cooling methods,and media,to guide industrial production.This study thoroughly analyzes and summarizes grinding temperature field models.First,the theory of the grinding temperature field is investigated,classifying it into traditional models based on a continuous belt heat source and those based on a discrete heat source,depending on whether the heat source is uniform and continuous.Through this examination,a more accurate grinding temperature model that closely aligns with practical grinding conditions is derived.Subsequently,various grinding thermal models are summarized,including models for the heat source distribution,energy distribution proportional coefficient,and convective heat transfer coefficient.Through comprehensive research,the most widely recognized,utilized,and accurate model for each category is identified.The application of these grinding thermal models is reviewed,shedding light on the governing laws that dictate the influence of the heat source distribution,heat distribution,and convective heat transfer in the grinding arc zone on the grinding temperature field.Finally,considering the current issues in the field of grinding temperature,potential future research directions are proposed.The aim of this study is to provide theoretical guidance and technical support for predicting workpiece temperature and improving surface integrity.展开更多
A combined conduction and radiation heat transfer model was used to simulate the heat transfer within wafer and investigate the effect of thermal transport properties on temperature non-uniformity within wafer surface...A combined conduction and radiation heat transfer model was used to simulate the heat transfer within wafer and investigate the effect of thermal transport properties on temperature non-uniformity within wafer surface. It is found that the increased conductivities in both doped and undoped regions help reduce the temperature difference across the wafer surface. However, the doped layer conductivity has little effect on the overall temperature distribution and difference. The temperature level and difference on the top surface drop suddenly when absorption coefficient changes from 104 to 103 m-1. When the absorption coefficient is less or equal to 103 m-1, the temperature level and difference do not change much. The emissivity has the dominant effect on the top surface temperature level and difference. Higher surface emissivity can easily increase the temperature level of the wafer surface. After using the improved property data, the overall temperature level reduces by about 200 K from the basis case. The results will help improve the current understanding of the energy transport in the rapid thermal processing and the wafer temperature monitor and control level.展开更多
The goal of this paper is to present a versatile framework for solution verification of PDE＇s. We first generalize the Richardson Extrapolation technique to an optimized extrapolation solution procedure that construc...The goal of this paper is to present a versatile framework for solution verification of PDE＇s. We first generalize the Richardson Extrapolation technique to an optimized extrapolation solution procedure that constructs the best consistent solution from a set of two or three coarse grid solution in the discrete norm of choice. This technique generalizes the Least Square Extrapolation method introduced by one of the author and W. Shyy. We second establish the conditioning number of the problem in a reduced space that approximates the main feature of the numerical solution thanks to a sensitivity analysis. Overall our method produces an a posteriori error estimation in this reduced space of approximation. The key feature of our method is that our construction does not require an internal knowledge of the software neither the source code that produces the solution to be verified. It can be applied in principle as a postprocessing procedure to off the shelf commercial code. We demonstrate the robustness of our method with two steady problems that are separately an incompressible back step flow test case and a heat transfer problem for a battery. Our error estimate might be ultimately verified with a near by manufactured solution. While our pro- cedure is systematic and requires numerous computation of residuals, one can take advantage of distributed computing to get quickly the error estimate.展开更多
Through the comparison of calcination conditions between cement preclinkering technology and cement precalcining technology,we studied the characteristics of temperature field distribution of cement preclinkering tech...Through the comparison of calcination conditions between cement preclinkering technology and cement precalcining technology,we studied the characteristics of temperature field distribution of cement preclinkering technology systems including cyclone preheater,preclinkering furnace,and rotary kiln.We used numericalsimulation method to obtain data of temperature field distribution.Some results are found by system study.The ratio of tailcoalof cement preclinkering technology is about 70%,and raw mealtemperature can reach 1070 ℃.Shorter L/D kiln type of preclinkering technology can obtain more stable calcining zone temperature.The highest solid temperature of cement preclinkering technology is higher than 80 ℃,and high temperature region（〉1450 ℃）length is 2 times,which is beneficialfor calcining clinker and higher clinker quality.So cement preclinkering technology can obtain more performance temperature filed,which improves both the solid-phase reaction and liquid-phase reaction.展开更多
日益频繁的极端天气给电热耦合系统造成的影响愈发严重。韧性是衡量系统抵御极端事件、减少故障影响并快速恢复的核心指标。为提升电热耦合系统抵御极端灾害的能力,提出一种考虑热惯性的热电联产虚拟电厂(combined heat and power-virtu...日益频繁的极端天气给电热耦合系统造成的影响愈发严重。韧性是衡量系统抵御极端事件、减少故障影响并快速恢复的核心指标。为提升电热耦合系统抵御极端灾害的能力,提出一种考虑热惯性的热电联产虚拟电厂(combined heat and power-virtual power plant,CHP-VPP)两阶段三层韧性提升策略。第一阶段以联络开关成本最小为目标,基于最小生成树理论对系统进行重构;第二阶段以运行成本最小为目标,基于分布鲁棒优化理论制定最恶劣的故障场景下的最优决策。采用列与约束生成算法进行迭代求解。基于IEEE 33节点电力系统+6节点供热系统构建CHP-VPP测试系统,仿真结果表明,所提出的方法可有效提升CHP-VPP应对极端灾害的韧性。展开更多
风电等可再生能源的出力具有不确定性,传统的鲁棒优化和随机优化方法在处理风电等可再生能源出力不确定性时都存在一些局限与不足。基于分布鲁棒优化研究了考虑风电出力不确定性的电-气-热综合能源系统(electricity-gas-heat integrated...风电等可再生能源的出力具有不确定性,传统的鲁棒优化和随机优化方法在处理风电等可再生能源出力不确定性时都存在一些局限与不足。基于分布鲁棒优化研究了考虑风电出力不确定性的电-气-热综合能源系统(electricity-gas-heat integrated energy system,EGH-IES)日前经济调度问题。将Kullback-Leibler(KL)散度作为分布函数与参考分布之间距离的量度,建立风电出力的分布函数集合。然后以系统运行总成本作为目标函数,建立了EGH-IES日前经济调度鲁棒机会约束优化模型。将所建立的鲁棒机会约束优化模型转化为利用求解器可直接求解的确定性混合整数线性优化模型。最后,通过算例分析验证了所提方法的有效性,并分析了电转气技术和热网管道输送延时对风电消纳的作用。展开更多
With the advancement of clean heating projects and the integration of large-scale distributed heat pumps into rural distribution networks in northern China,power grid companies face tremendous pressure to invest in po...With the advancement of clean heating projects and the integration of large-scale distributed heat pumps into rural distribution networks in northern China,power grid companies face tremendous pressure to invest in power grid upgrades,which bring opportunities for renewable power generation integration.The combination of heating by distributed renewable energy with the flexible operation of heat pumps is a feasible alternative for dealing with grid reinforcement challenges resulting from heating electrification.In this paper,a mathematical model of the collaborative planning of distributed wind power generation(DWPG)and distribution network with large-scale heat pumps is developed.In this model,the operational flexibility of the heat pump load is fully considered and the requirements of a comfortable indoor temperature are met.By applying this model,the goals of not only increasing the profit of DWPG but also reducing the cost of the power grid upgrade can be achieved.展开更多
The flow of pseudoplastic power-law fluids with different flow indexes at a microchannel plate was studied using computational fluid dynamic simulation.The velocity distribution along the microchannel plate and especi...The flow of pseudoplastic power-law fluids with different flow indexes at a microchannel plate was studied using computational fluid dynamic simulation.The velocity distribution along the microchannel plate and especially in the microchannel slits,flow pattern along the outlet arc and the pressure drop through the whole of microchannel plate were investigated at different power-law flow indexes.The results showed that the velocity profile in the microchannel slits for low flow index fluids was similar to the plug flow and had uniform pattern.Also the power-law fluids with lower flow indexes had lower stagnation zones near the outlet of the microchannel plate.The pressure drop through the microchannel plate showed huge differences between the fluids.The most interesting result was that the pressure drops for power-law fluids were very smaller than that of Newtonian fluids.In addition,the heat transfer of the fluids through the microchannel with different channel numbers in a wide range of Reynolds number was investigated.For power-law fluid with flow index(n=0.4),the Nusselt number increases continuously as the number of channels increases.The results highlight the potential use of using pseudoplastic fluids in the microheat exchangers which can lower the pressure drop and increase the heat transfer efficiency.展开更多
基金support from the National Key R&D Program of China(Grant No.2019YFC1905701)the Chongqing Young Talent Program(Grant No.cstc2022ycjh-bgzxm0172).
文摘Low carbon development of blast furnaces is one of the key technological directions in the current development of ironmaking.Owing to the differences in the physical and chemical properties of hydrogen and carbon,hydrogen-rich media entering a blast furnace will change the heat distribution,thus affecting the stability of production.Accordingly,a heat distribution model was proposed to study the temperature distribution in a blast furnace,simultaneously considering gas-solid heat exchange,slag and iron melting,and chemical reactions.The model was used to analyze the temperature distribution of a 2300 m^(3) blast furnace and was verified via comparison with actual production data.Subsequently,the effects of the injection rate of hydrogen-rich media,H2 concentration,and oxygen enrichment rate of the blast on the temperature distribution were investigated.Results indicated that the increase in the injection rate of the hydrogen-rich media decreased the amount of direct reduction and led to an increase in the furnace temperature.Furthermore,an increase in the oxygen enrichment rate led to a decrease in the furnace temperature,but could reduce the solid fuel ratio,while the change in H2 concentration had less effect on the temperature distribution.The combination of hydrogen-rich media injection and the increase in the oxygen enrichment rate would help to adjust the temperature distribution to the same level as the conventional blast furnace conditions.
基金supported by Science and Technology Cooperation-Sino-Malta Fund 2019:Research and Demonstration of Real-time Accurate Monitoring System for Early-stage Fish in Recirculating Aquaculture System(AquaDetector,Grant No.2019YFE0103700)Overseas Highlevel Youth Talents Program(China Agricultural University,China,Grant No.62339001)+2 种基金China Agricultural University Excellent Talents Plan(Grant No.31051015)Major Science and Technology Innovation Fund 2019 of Shandong Province(Grant No.2019JZZY010703)National Innovation Center for Digital Fishery,and Beijing Engineering and Technology Research Center for Internet of Things in Agriculture.The authors also appreciate constructive。
文摘Maintaining suitable temperature level around tomato in the greenhouse is essential for the high-quality production.However,in summer,the temperature level around the tomato is usually unclear except using a high-precision temperature imager.To solve this problem,thermal performance of 3D(three-dimensional)tomato model built based on SolidWorks was investigated by the computational fluid dynamics(CFD)simulations.To assess the effect of temperature distribution around the tomato,a simplified 3D tomato numerical model was firstly validated by a set of field measurement data.The light intensity and indoor ventilation were regarded as the mainly environment factors in the Venlo greenhouse,thermal stratification around tomatoes at different time of day was further studied.The numerical results illustrated the different temperature distribution around tomato body under different radiation intensity.It was found that ventilation could obviously adjust the temperature gradient around the tomato,and alleviate high temperature effect particularly in summer.Suitable ventilation could create a suitable thermal environment for the tomato growth.This study clearly demonstrated 3D temperature distribution around tomatoes,which is beneficial to provide the reference for accurate detection of 3D tomato temperature and appropriate thermal environment design.
基金supported by the National Natural Science Foundation of China(Grant Nos.40875084and40705012)the National Key Technologies R&D Program of China(Grant No.2008BAC40B00)
文摘The latitude-altitude distributions of radiative fluxes and heating rates are investigated by utilizing CloudSat satellite data over China during summer. The Tibetan Plateau causes the downward shortwave fluxes of the lower atmosphere over central China to be smaller than the fluxes over southern and northern China by generating more clouds. The existence of a larger quantity of clouds over central China reflects a greater amount of solar radiation back into space. The vertical gradients of upward shortwave radiative fluxes in the atmosphere below 8 km are greater than those above 8 km. The latitudinal-altitude distributions of downward longwave radiative fluxes show a slantwise decreasing trend from low latitudes to high latitudes that gradually weaken in the downward direction. The upward longwave radiative fluxes also weaken in the upward direction but with larger gradients. The maximum heating rates by solar radiation and cooling rates by longwave infrared radiation are located over 28 40°N at 7 8 km mean sea level (MSL), and they are larger than the rates in the northern and southern regions. The heating and cooling rates match well both vertically and geographically.
文摘电-热综合能源系统(integrated electricity and heat system,IEHS)可以有效促进可再生能源消纳。构建区域供热系统精细化模型与合理的可再生能源不确定性出力模型是调度IEHS的两个难点。该文首先提出计及可变流量调节模式的IEHS条件分布鲁棒优化调度模型,主要有两点改进:通过构建基于修正模糊集的条件分布鲁棒模型建模可再生能源预测误差与其预测出力信息之间的内在依赖性,提升调度结果安全性与最优性;基于流体能量守恒方程与一阶隐式迎风格式建立可变流量调节模式下的IEHS调度模型,以期充分挖掘区域供热系统的灵活性,促进可再生能源消纳。所构建的IEHS调度模型为含有大量非线性约束的条件分布鲁棒模型,难以直接求解。对此,通过对偶理论与条件风险价值近似方法将条件分布鲁棒模型转化为含非线性约束的确定性模型,并提出自适应McCormick算法用以求解非线性约束。通过不同规模案例仿真表明,所提模型能够降低IEHS的调度成本,所提算法在保证可行性的条件下快速求出问题的近似最优解,最优间隙小于千分之一。
文摘In order for economically viable distributed generation systems for apartment buildings to spread, it is essential to develop an efficient and low-cost heat supply system. We have developed a new eogeneration system called the Neighboring Cogeneration system （NCG）. The key concept of this system is to install a heat accumulator with a hot water supply and a room heating function at each household and to connect different households by a single loop of hot water pipe. As a result, time leveling of the heat supply and heat transferring among households becomes possible. Thus, the costs of the pipe and the heat source equipment decrease. Furthermore, because all of the heat accumulators store heat, the total heat storage capacity is large enough for cogeneration to generate exhaust heat according to the electricity demand and with a high operating rate. In this paper, we report the results of the NCG system for 7 lived-in households. The controlling system worked efficiently. All of the households were able to use hot water without any difficulties. Further, we report the results of the energy saving effect of the NCG system for 50 lived-in households by means of a simulation based on the experimental results for NEXT21.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52205481,51975305 and 52105457)Shandong Natural Science Foundation(Grant Nos.ZR2020ME158,ZR2023QE057,ZR2022QE028,ZR2021QE116,ZR2020KE027,and ZR2022QE159)+1 种基金Qingdao Science and Technology Planning Park Cultivation Plan(23-1-5-yqpy-17-qy)China Postdoctral Science Foundation(2021M701810).
文摘Grinding is a crucial process in machining workpieces because it plays a vital role in achieving the desired precision and surface quality.However,a significant technical challenge in grinding is the potential increase in temperature due to high specific energy,which can lead to surface thermal damage.Therefore,ensuring control over the surface integrity of workpieces during grinding becomes a critical concern.This necessitates the development of temperature field models that consider various parameters,such as workpiece materials,grinding wheels,grinding parameters,cooling methods,and media,to guide industrial production.This study thoroughly analyzes and summarizes grinding temperature field models.First,the theory of the grinding temperature field is investigated,classifying it into traditional models based on a continuous belt heat source and those based on a discrete heat source,depending on whether the heat source is uniform and continuous.Through this examination,a more accurate grinding temperature model that closely aligns with practical grinding conditions is derived.Subsequently,various grinding thermal models are summarized,including models for the heat source distribution,energy distribution proportional coefficient,and convective heat transfer coefficient.Through comprehensive research,the most widely recognized,utilized,and accurate model for each category is identified.The application of these grinding thermal models is reviewed,shedding light on the governing laws that dictate the influence of the heat source distribution,heat distribution,and convective heat transfer in the grinding arc zone on the grinding temperature field.Finally,considering the current issues in the field of grinding temperature,potential future research directions are proposed.The aim of this study is to provide theoretical guidance and technical support for predicting workpiece temperature and improving surface integrity.
基金Project(N110204015)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2012M510075)supported by the China Postdoctoral Science Foundation
文摘A combined conduction and radiation heat transfer model was used to simulate the heat transfer within wafer and investigate the effect of thermal transport properties on temperature non-uniformity within wafer surface. It is found that the increased conductivities in both doped and undoped regions help reduce the temperature difference across the wafer surface. However, the doped layer conductivity has little effect on the overall temperature distribution and difference. The temperature level and difference on the top surface drop suddenly when absorption coefficient changes from 104 to 103 m-1. When the absorption coefficient is less or equal to 103 m-1, the temperature level and difference do not change much. The emissivity has the dominant effect on the top surface temperature level and difference. Higher surface emissivity can easily increase the temperature level of the wafer surface. After using the improved property data, the overall temperature level reduces by about 200 K from the basis case. The results will help improve the current understanding of the energy transport in the rapid thermal processing and the wafer temperature monitor and control level.
基金Sandia Nat.Lab.Sandia is a multiprogram laboratory operated by Sandia Corporation,a Lockheed Martin Company,for the United States Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000
文摘The goal of this paper is to present a versatile framework for solution verification of PDE＇s. We first generalize the Richardson Extrapolation technique to an optimized extrapolation solution procedure that constructs the best consistent solution from a set of two or three coarse grid solution in the discrete norm of choice. This technique generalizes the Least Square Extrapolation method introduced by one of the author and W. Shyy. We second establish the conditioning number of the problem in a reduced space that approximates the main feature of the numerical solution thanks to a sensitivity analysis. Overall our method produces an a posteriori error estimation in this reduced space of approximation. The key feature of our method is that our construction does not require an internal knowledge of the software neither the source code that produces the solution to be verified. It can be applied in principle as a postprocessing procedure to off the shelf commercial code. We demonstrate the robustness of our method with two steady problems that are separately an incompressible back step flow test case and a heat transfer problem for a battery. Our error estimate might be ultimately verified with a near by manufactured solution. While our pro- cedure is systematic and requires numerous computation of residuals, one can take advantage of distributed computing to get quickly the error estimate.
基金Funded by the Major State Basic Research Perelopment Program of China(973 Program)(No.2009CB623102)the Key Fund Project of Sichuan Provincial Department of Education(No.14ZA0086)the Key Fund Project of Professional Scientific Research Innovation Team of Southwest University of Science and Technology(No.14tdfk01)
文摘Through the comparison of calcination conditions between cement preclinkering technology and cement precalcining technology,we studied the characteristics of temperature field distribution of cement preclinkering technology systems including cyclone preheater,preclinkering furnace,and rotary kiln.We used numericalsimulation method to obtain data of temperature field distribution.Some results are found by system study.The ratio of tailcoalof cement preclinkering technology is about 70%,and raw mealtemperature can reach 1070 ℃.Shorter L/D kiln type of preclinkering technology can obtain more stable calcining zone temperature.The highest solid temperature of cement preclinkering technology is higher than 80 ℃,and high temperature region（〉1450 ℃）length is 2 times,which is beneficialfor calcining clinker and higher clinker quality.So cement preclinkering technology can obtain more performance temperature filed,which improves both the solid-phase reaction and liquid-phase reaction.
文摘日益频繁的极端天气给电热耦合系统造成的影响愈发严重。韧性是衡量系统抵御极端事件、减少故障影响并快速恢复的核心指标。为提升电热耦合系统抵御极端灾害的能力,提出一种考虑热惯性的热电联产虚拟电厂(combined heat and power-virtual power plant,CHP-VPP)两阶段三层韧性提升策略。第一阶段以联络开关成本最小为目标,基于最小生成树理论对系统进行重构;第二阶段以运行成本最小为目标,基于分布鲁棒优化理论制定最恶劣的故障场景下的最优决策。采用列与约束生成算法进行迭代求解。基于IEEE 33节点电力系统+6节点供热系统构建CHP-VPP测试系统,仿真结果表明,所提出的方法可有效提升CHP-VPP应对极端灾害的韧性。
文摘风电等可再生能源的出力具有不确定性,传统的鲁棒优化和随机优化方法在处理风电等可再生能源出力不确定性时都存在一些局限与不足。基于分布鲁棒优化研究了考虑风电出力不确定性的电-气-热综合能源系统(electricity-gas-heat integrated energy system,EGH-IES)日前经济调度问题。将Kullback-Leibler(KL)散度作为分布函数与参考分布之间距离的量度,建立风电出力的分布函数集合。然后以系统运行总成本作为目标函数,建立了EGH-IES日前经济调度鲁棒机会约束优化模型。将所建立的鲁棒机会约束优化模型转化为利用求解器可直接求解的确定性混合整数线性优化模型。最后,通过算例分析验证了所提方法的有效性,并分析了电转气技术和热网管道输送延时对风电消纳的作用。
文摘With the advancement of clean heating projects and the integration of large-scale distributed heat pumps into rural distribution networks in northern China,power grid companies face tremendous pressure to invest in power grid upgrades,which bring opportunities for renewable power generation integration.The combination of heating by distributed renewable energy with the flexible operation of heat pumps is a feasible alternative for dealing with grid reinforcement challenges resulting from heating electrification.In this paper,a mathematical model of the collaborative planning of distributed wind power generation(DWPG)and distribution network with large-scale heat pumps is developed.In this model,the operational flexibility of the heat pump load is fully considered and the requirements of a comfortable indoor temperature are met.By applying this model,the goals of not only increasing the profit of DWPG but also reducing the cost of the power grid upgrade can be achieved.
文摘The flow of pseudoplastic power-law fluids with different flow indexes at a microchannel plate was studied using computational fluid dynamic simulation.The velocity distribution along the microchannel plate and especially in the microchannel slits,flow pattern along the outlet arc and the pressure drop through the whole of microchannel plate were investigated at different power-law flow indexes.The results showed that the velocity profile in the microchannel slits for low flow index fluids was similar to the plug flow and had uniform pattern.Also the power-law fluids with lower flow indexes had lower stagnation zones near the outlet of the microchannel plate.The pressure drop through the microchannel plate showed huge differences between the fluids.The most interesting result was that the pressure drops for power-law fluids were very smaller than that of Newtonian fluids.In addition,the heat transfer of the fluids through the microchannel with different channel numbers in a wide range of Reynolds number was investigated.For power-law fluid with flow index(n=0.4),the Nusselt number increases continuously as the number of channels increases.The results highlight the potential use of using pseudoplastic fluids in the microheat exchangers which can lower the pressure drop and increase the heat transfer efficiency.
