Deep metal mines are often mined using the high-level pillars with subsequent cementation backfilling(HLSCB)mining method.At the design stage,it is therefore important to have a reasonable method for determining the s...Deep metal mines are often mined using the high-level pillars with subsequent cementation backfilling(HLSCB)mining method.At the design stage,it is therefore important to have a reasonable method for determining the shear strength of the high-level pillars(i.e.cohesion and internal friction angle)when they are supported by cemented backfilling.In this study,a formula was derived for the upper limit of the confining pressure σ3max on a high-level pillar supported by cemented backfilling in a deep metal mine.A new method of estimating the shear strength of such pillars was then proposed based on the Hoek eBrown failure criterion.Our analysis indicates that the horizontal stress σhh acting on the cemented backfill pillar can be simplified by expressing it as a constant value.A reasonable and effective value for σ3max can then be determined.The value of s3max predicted using the proposed method is generally less than 3 MPa.Within this range,the shear strength of the high-level pillar is accurately calculated using the equivalent MohreCoulomb theory.The proposed method can effectively avoid the calculation of inaccurate shear strength values for the high-level pillars when the original HoekeBrown criterion is used in the presence of large confining pressures,i.e.the situation in which the cohesion value is too large and the friction angle is too small can effectively be avoided.The proposed method is applied to a deep metal mine in China that is being excavated using the HLSCB method.The shear strength parameters of the high-level pillars obtained using the proposed method were input in the numerical simulations.The numerical results show that the recommended level heights and sizes of the high-level pillars and rooms in the mine are rational.展开更多
Pyrite is one of the common authigenic minerals in marine sediments.Previous studies have shown that the morphological and isotopic characteristics of pyrite are closely related to the geochemical environment where it...Pyrite is one of the common authigenic minerals in marine sediments.Previous studies have shown that the morphological and isotopic characteristics of pyrite are closely related to the geochemical environment where it is formed.To better understand the for-mation mechanism of authigenic pyrite,we analyzed the isotopic composition,morphology,and distribution of pyrite in the sediment at 500m below the seafloor from Xisha Trough,South China Sea.Mineral morphologies were observed by scanning electron micros-copy and Raman spectrography.X-Ray computed tomography was applied to measure the particle size of pyrite.The size of pyrite crystals in the matrix sediment mainly ranged between 25 and 65µm(av.ca.40µm),although crystals were larger(av.ca.50μm)in the veins.The pyrites had a fine-grained truncated octahedral shape with occasionally well-developed growth steps,which implies the low growth rate and weak anaerobic oxidation of methane-sulfate reduction when pyrite was formed.Theδ^(34)S values of pyrites ranged from+20.8‰Vienna-defined Canyon Diablo Troilite(V-CDT)to+33.2‰V-CDT and from+44.8‰V-CDT to+48.9‰,which suggest two growth stages.In the first stage,with the continuous low methane flux,the pyrite possibly formed in an environment with good access to seawater.In the second stage,the pyrites mainly developed in sediment fractures and appeared in veins,probably due to the limited availability of sulfate.The less exposure of pyrite to the environment in the second stage was probably caused by sediment accumulation or perturbation.In this study,an episodic pyritization process was identified,and the paleoenvironment was reconstructed for the sediment investigated.展开更多
The East Asian trough(EAT)profoundly influences the East Asian spring climate.In this study,the relationship of the EATs among the three spring months is investigated.Correlation analysis shows that the variation in M...The East Asian trough(EAT)profoundly influences the East Asian spring climate.In this study,the relationship of the EATs among the three spring months is investigated.Correlation analysis shows that the variation in March EAT is closely related to that of April EAT.Extended empirical orthogonal function(EEOF)analysis also confirms the co-variation of the March and April EATs.The positive/negative EEOF1 features the persistent strengthened/weakened EAT from March to April.Further investigation indicates that the variations in EEOF1 are related to a dipole sea surface temperature(SST)pattern over the North Atlantic and the SST anomaly over the tropical Indian Ocean.The dipole SST pattern over the North Atlantic,with one center east of Newfoundland Island and another east of Bermuda,could trigger a Rossby wave train to influence the EAT in March−April.The SST anomaly over the tropical Indian Ocean can change the Walker circulation and influence the atmospheric circulation over the tropical western Pacific,subsequently impacting the southern part of the EAT in March−April.Besides the SST factors,the Northeast Asian snow cover could change the regional thermal conditions and lead to persistent EAT anomalies from March to April.These three impact factors are generally independent of each other,jointly explaining large variations in the EAT EEOF1.Moreover,the signals of the three factors could be traced back to February,consequently providing a potential prediction source for the EAT variation in March and April.展开更多
This study includes an experimental and numerical analysis of the performances of a parabolic trough collector(PTC)with and without cylindrical turbulators.The PTC is designed with dimensions of 2.00 m in length and 1...This study includes an experimental and numerical analysis of the performances of a parabolic trough collector(PTC)with and without cylindrical turbulators.The PTC is designed with dimensions of 2.00 m in length and 1.00 m in width.The related reflector is made of lined sheets of aluminum,and the tubes are made of stainless steel used for the absorption of heat.They have an outer diameter of 0.051 m and a wall thickness of 0.002 m.Water,used as a heat transfer fluid(HTF),flows through the absorber tube at a mass flow rate of 0.7 kg/s.The dimensions of cylindrical turbulators are 0.04 m in length and 0.047 m in diameter.Simulations are performed using the ANSYS Fluent 2020 R2 software.The PTC performance is evaluated by comparing the experimental and numerical outcomes,namely,the outlet temperature,useful heat,and thermal efficiency for a modified tube(MT)(tube with novel cylindrical turbulators)and a plain tube(PT)(tube without novel cylindrical turbulators).According to the results,the experimental outlet temperatures recorded 63.2°C and 50.5°C for the MT and PT,respectively.The heat gain reaches 1137.5 Win the MT and 685.8 Win the PT.Compared to the PT collector,the PTC exhibited a(1.64 times)higher efficiency.展开更多
The major and trace elemental compositions of clinopyroxene from basalt were used to characterize the nature of the primitive magma and structural environment beneath the southern Okinawa Trough(SOT),which is an initi...The major and trace elemental compositions of clinopyroxene from basalt were used to characterize the nature of the primitive magma and structural environment beneath the southern Okinawa Trough(SOT),which is an initial back-arc basin at a continental margin.The clinopyroxenes in the basalt were augite with variable Mg^(#)contents(73.37-78.22).The regular variations in major oxide contents(i.e.,CaO,FeO,TiO_(2),and Cr)with decreasing Mg#implied that the clinopyroxenes evolved from being enriched in Mg,Ca,and Cr to being enriched in Fe and Ti.The clinopyroxenes had relatively low rare earth element concentrations(7.51×10^(-6) to 12.68×10^(-6))and negative Eu anomalies(δEu=0.67-0.95).The Kd_(cpx) values of clinopyroxenes(0.2-0.26),which were used to examine whether the clinopyroxene was equilibrated with its host basalt,demonstrate that these clinopyroxene phenocrysts were not captured crystals but were instead produced by crystallization differentiation of the magma.The calculated clinopyroxene crystallization temperatures showed a narrow range of 990-1061℃,and their crystallization pressures ranged from 2.0 to 3.2 kbar.The geochemistry features of these clinopyroxenes indicated that the parent magma belonged to the subalkaline tholeiitic magma series and suggested that the magma experienced crystallization differentiation of olivine,plagioclase,and clinopyroxene,where the crystallization of plagioclase occurred earlier than that of clinopyroxene.Combined with geophysical data,this research on primitive magma and its crystallization differentiation from clinopyroxene indicates that the SOT is in the stage of‘seafloor spreading’and that basaltic rocks produced from tholeiitic magma represent the generation of oceanic crust.展开更多
Design and Development of a Parabolic Trough Solar Air Heater (PTSAH) for a Greenhouse Dryer (GD) was done to improve the dryer’s performance. The materials used for the fabrication of the PTSAH included galvanized s...Design and Development of a Parabolic Trough Solar Air Heater (PTSAH) for a Greenhouse Dryer (GD) was done to improve the dryer’s performance. The materials used for the fabrication of the PTSAH included galvanized sheets covered with aluminium foil, an absorber tube made of GI pipe painted matt black to increase heat absorbance at the focal line, mild steel square tubes, shutter plywood, and an axial fan to push air through the absorber tube. Key geometrical parameters used for the design of the PTSAH were a rim angle of 98 degrees, focal length of 0.2608 m, height of 0.3451 m, length of 2 m, and an aperture width of 1.2 m. The PTSAH’s total aperture surface area was 2.4 m2, while its absorber tube surface area was 0.1587 m2. The PTSAH was experimentally tested to establish its thermal performance. It was found that the ambient air recorded an average value of 31.1˚C and that the air heater could increase the air temperature by 45.6˚C above ambient with a thermal efficiency of 5.3%. It can, therefore, be concluded that the PTSAH can significantly improve the performance of a GD by supplying the GD with air at a higher temperature than ambient.展开更多
A parabolic trough solar collector(PTSC)converts solar radiation into thermal energy.However,low thermal efficiency of PTSC poses a hindrance to the deployment of solar thermal power plants.Thermal performance of PTSC...A parabolic trough solar collector(PTSC)converts solar radiation into thermal energy.However,low thermal efficiency of PTSC poses a hindrance to the deployment of solar thermal power plants.Thermal performance of PTSC is enhanced in this study by incorporating magnetic nanoparticles into the working fluid.The circular receiver pipe,with dimensions of 66 mm diameter,2 mm thickness,and 24 m length,is exposed to uniform temperature and velocity conditions.The working fluid,Therminol-66,is supplemented with Fe3O4 magnetic nanoparticles at concentrations ranging from 1%to 4%.The findings demonstrate that the inclusion of nanoparticles increases the convective heat transfer coefficient(HTC)of the PTSC,with higher nanoparticle volume fractions leading to greater heat transfer but increased pressure drop.The thermal enhancement factor(TEF)of the PTSC is positively affected by the volume fraction of nanoparticles,both with and without a magnetic field.Notably,the scenario with a 4%nanoparticle volume fraction and a magnetic field strength of 250 G exhibits the highest TEF,indicating superior thermal performance.These findings offer potential avenues for improving the efficiency of PTSCs in solar thermal plants by introducing magnetic nanoparticles into the working fluid.展开更多
This paper explores strategies to cultivate high-level technical talents in vocational undergraduate colleges by analyzing their development,the essence of such talents,and proposing several key measures.Strategies in...This paper explores strategies to cultivate high-level technical talents in vocational undergraduate colleges by analyzing their development,the essence of such talents,and proposing several key measures.Strategies include optimizing professional settings and curricula,enhancing school-enterprise cooperation and the integration of industry-university-research,improving teaching staff quality and educational standards,and expanding international cooperation.The importance of policy support and funding and establishing robust quality assurance systems is emphasized for effectively cultivating skilled talents in vocational undergraduate colleges.展开更多
Objective This study aimed to evaluate the clinical benefits of a vancomycin dosage strategy based on a serum trough concentration model in elderly patients.Methods This prospective single-center, open-label, randomiz...Objective This study aimed to evaluate the clinical benefits of a vancomycin dosage strategy based on a serum trough concentration model in elderly patients.Methods This prospective single-center, open-label, randomized controlled trial categorized 66 elderly patients with severe pneumonia into study and control groups. The control group received vancomycin using a regimen decided by the attending physician. Meanwhile, the study group received individualized vancomycin therapy with a dosing strategy based on a serum trough concentration model. The primary endpoint was the proportion of patients with serum trough concentrations reaching the target values.The secondary endpoints were clinical response, vancomycin treatment duration, and vancomycinassociated acute kidney injury(VA-AKI) occurrence.Results All patients were at least 60 years old(median age = 81 years). The proportion of patients with target trough concentration achievement(≥ 15 mg/L) with the initial vancomycin regimen was significantly higher in the study group compared to the control group(75.8% vs. 42.4%, P = 0.006).Forty-five patients(68.2%) achieved clinical success, the median duration of vancomycin therapy was10.0 days, and VA-AKI occurred in eight patients(12.1%). However, there were no significant differences in these parameters between the two groups. The model for predicting vancomycin trough concentrations was upgraded to: serum trough concentration(mg/L) = 17.194-0.104 × creatinine clearance rate(mL/min) + 0.313 × vancomycin daily dose [mg/(kg·d)].Conclusion A vancomycin dosage strategy based on a serum trough concentration model can improve the proportion of patients achieving target trough concentrations in elderly patients with severe pneumonia.展开更多
Based on the latest drilling, seismic and field outcrop data, the geological characteristics(e.g. strata, development and sedimentary evolution) of the southern segment of the Late Sinian–Early Cambrian Deyang–Anyue...Based on the latest drilling, seismic and field outcrop data, the geological characteristics(e.g. strata, development and sedimentary evolution) of the southern segment of the Late Sinian–Early Cambrian Deyang–Anyue rift trough in the Sichuan Basin are analyzed. First, the strata in the southern segment are complete. The first to second members of Dengying Formation(Deng 1 + Deng 2) are found with relatively stable thickness(400–550 m), and the third to fourth members(Deng 3+ Deng 4) show great thickness difference between the marginal trough and the inner trough, which is up to 250 m. The Cambrian Maidiping Formation and Qiongzhusi Formation in southern Sichuan Basin are relatively thin, with the thickness changing greatly and frequently. Second, the Deyang–Anyue rift trough extended southward during the Deng 4 period, affecting southern Sichuan Basin. Compared to the middle and northern segments of the rift trough, the southern segment is generally wide, gentle and shallow, with multiple steps, and alternating uplifts and sags, which are distributed in finger shape. Third, the Deng 1 + Deng 2 in southern Sichuan Basin records the dominance of carbonate platform and unobvious sedimentary differentiation, and the Deng 4 exhibits obvious sedimentary differentiation, namely, basin–slope–secondary slope–slope–secondary slope–platform margin–restricted platform, from the inner trough to the marginal trough. Fourth, the rift trough in southern Sichuan Basin has evolved in four stages: stabilization of Deng 1–Deng 2, initialization of Deng 3–Deng 4, filling of Maidiping–Qiongzhusi, and extinction of Canglangpu Formation.展开更多
In order to improve the performance of Al_(2)O_(3)-SiC-C castables for iron trough,samples were prepared using brown corundum,dense corundum,activated alumina micropowder,ball pitch,and silicon as main raw materials,c...In order to improve the performance of Al_(2)O_(3)-SiC-C castables for iron trough,samples were prepared using brown corundum,dense corundum,activated alumina micropowder,ball pitch,and silicon as main raw materials,calcium aluminate cement as the binder.Several kinds of silica fumes(93SiO_(2),96SiO_(2),and 99SiO_(2))with different particle size distributions and chemical composition were added to research the effects on the properties of castables.The results show that the sample with 99SiO_(2) fume has high water requirement for molding,but the bulk density is the lowest,the apparent porosity is the highest,the oxidation resistance is the worst,and the permanent linear change on heating is low after firing at 1 450 ℃ for 3 h.The bulk density and the apparent porosity of the sample with 93SiO_(2) fume or 96SiO_(2) fume are equivalent,the hot modulus of rupture of the sample with 93SiO_(2) fume is the lowest,and the slag resistance of the sample with 96SiO_(2) fume is the best.The comprehensive performance of the sample with 96SiO_(2) fume is the best.展开更多
The Mamfe Basin has been the subject of many studies,but some debates persist,especially concerning the stratigraphic nomenclature,corundum origin,and marine transgression.The aims of this work are(1)to propose a new ...The Mamfe Basin has been the subject of many studies,but some debates persist,especially concerning the stratigraphic nomenclature,corundum origin,and marine transgression.The aims of this work are(1)to propose a new lithostratigraphic nomenclature of the Mamfe Basin formation based on new field observations,(2)to determine the source rock distribution and the origin of gem deposits and(3)to correlate the Cameroon section of the Mamfe Basin with the Nigerian deposits.The main results show that the name Manyu River Group is more appropriate as the Manyu River crosses all the facies in the Mamfe sedimentary Basin belonging to the Manyu Division.According to the facies analysis,the age of deposition,the mineralogic and geochemical data such as the V vs.Al2O3andΣREE vs.Al_(2)O_(3),TiO_(2)MgO,Na_(2)O,P_(2)O_(5),and CaO diagrams,this Group is composed of at least five Formations,including four Cretaceous Formations,from bottom to top:the Etoko Formation(alluvial and fluvial channel to fluvio-lacustrine deposits),the Nfaitok Formation(lagoonal deposits),the Bachuo Ntai Formation(fluvial braided channels or fluvio-deltaic environment)and the Eyumojock/NsanaragatiFormation(fluvio-lacustrine deposits)and the new Cenozoic Formation named Bakebe Formation(fluvio-lacustrine deposits).The gem minerals such as corundum,rutile,or tourmaline in the Cretaceous deposits of the Mamfe Basin are mainly detrital as indicated by the presence of worn shapes and fragments of these minerals.The presence of sapphire in the AlboCenomanian deposits indicates a Precambrian age of the felsic source rock,likely the plutonic rocks such as granite or pegmatite as indicated by the abundance of tourmaline and high LREE/HREE ratios(14.81–34.29)and slightly negative and positive Eu anomalies(0.85–1.15).This marine incursion in the Mamfe Basin was probably from West Nigeria,according to the geographic location of the Mamfe Basin and the general palaeogeographic evolution of the Benue Trough.展开更多
Background: The 2020 consensus guidelines recommend AUC guided dosing as the preferred monitoring method for vancomycin. AUC based dosing has shown to reduce incidence of acute kidney injury (AKI), utilize lower daily...Background: The 2020 consensus guidelines recommend AUC guided dosing as the preferred monitoring method for vancomycin. AUC based dosing has shown to reduce incidence of acute kidney injury (AKI), utilize lower daily doses in obese patients, and maintain efficacy. Several institutions have adjusted their protocols to utilize AUC guided dosing. However, there are limited studies comparing the clinical outcomes of AUC versus trough monitoring. Methods: This was a retrospective, observational, single centered study. The primary outcome was to evaluate the clinical success of AUC dosing versus trough based dosing of vancomycin for MRSA infections using a composite outcome of afebrile post treatment ( Results: Forty-seven patients were included in this study, 17 in the AUC group and 30 in the trough group. The primary composite outcome showed a significant benefit of AUC dosing (p = 0.04). The composite component culture clearance showed the largest improvement for the AUC group when compared with the trough group (p = 0.03). More patients achieved therapeutic target attainment and reached the target sooner (3 days versus 4 days, p = 0.2) in the AUC group. Over the study course, 94.1% of patients in the AUC group were considered therapeutic compared to 63.8% in the trough group (p = 0.03). Vancomycin levels were collected less frequently in the AUC group (3 versus 4, p = 0.2). Conclusion: The outcomes of this study may suggest AUC guided dosing as a beneficial alternative to trough based dosing. AUC based dosing may improve clinical success which can be further explored in larger prospective clinical trials.展开更多
The present study discusses the thermal performance of the receiver tube,which contains a wall with various fin shapes in the parabolic trough collector.Inserted fins and bulge surfaces of the inner wall of the receiv...The present study discusses the thermal performance of the receiver tube,which contains a wall with various fin shapes in the parabolic trough collector.Inserted fins and bulge surfaces of the inner wall of the receiver tube increase the turbulent fluid flow.In pursuance of uniform distribution of heat transfer,various fin shapes such as square-shape,circle-shape,triangle-shape,and combined square-circle shapes were inserted,examined,and compared.A study of the temperature differences and fluid flow is meaningful for this project therefore finite volume method was used to investigate heat transfer.Also,hybrid Nano-Fluid AL_(2)O_(3-)CuO,TiO_(2-)Cu,and AgMgO were applied to increase thermal diffusivity.When the combined square-circle-shaped fin was inserted,the thermal peak of fluid flow in the receiver tube was lower than the other studied fin shapes by almost 1%.Besides,the hybrid nano-fluid Ag-MgO Syltherm-oil-800 has lower thermal waste in comparison to others by more than 3%.展开更多
The melting of the West Antarctic Ice Shelf has increased since the 1990s,driven by the relatively warm Circumpolar Deep Water(CDW)that penetrates into the West Antarctic Ice Shelf cavities through submarine glacial t...The melting of the West Antarctic Ice Shelf has increased since the 1990s,driven by the relatively warm Circumpolar Deep Water(CDW)that penetrates into the West Antarctic Ice Shelf cavities through submarine glacial troughs across the continental shelf.In this study,temperature,salinity,and current velocity data obtained by the Chinese National Antarctic Research Expedition in the Dotson-Getz Trough(DGT)shows clear differences in distribution of modified Circumpolar Deep Water(mCDW)in the summers of 2020 and 2022.Combined with contemporaneous wind data and additional temperature and salinity data from instrumented seals,the processes and mechanisms responsible for this variation are discussed.Compared with 2020,there is a significant increase in mCDW thickness in 2022,with a doubling of total heat content as the mCDW inflow path across the DGT shifts towards the eastern bank.We propose that a southward shift in the westerly winds in the summer of 2022 moved the upper oceanic divergence zone southward towards the continental slope,promoting the upwelling of mCDW above 500 m.Concurrently,stronger westerly winds over the continental slope strengthened the eastward undercurrent,increasing the transport of this mCDW and its associated heat content to the DGT through Ekman dynamics.These observations show there is strong interannual variability in the strength,path and extent of mCDW inflows to the DGT and that care must be taken when planning observation programs for long-term monitoring of the oceanic heat input to the ice shelves of this globally significant region.展开更多
Rapid urbanization and population growth have triggered an increase in urban housing demand and rising housing prices,which can influence the migration intention of high-level talents.Much work within the literature h...Rapid urbanization and population growth have triggered an increase in urban housing demand and rising housing prices,which can influence the migration intention of high-level talents.Much work within the literature has focused more on the migration of the general public.However,antecedents of migration intention and the impact of housing prices on the migration of high-level talents remain unclear.Therefore,based on the push-pull theory,this study investigates the influencing factors of talent migration intention and explores the role of housing prices.This study reveals a complex mechanism underlying migration decisions by using logistic regression models and survey data of high-level talents in the Pearl River Delta(PRD)megalopolis of China.The results indicate that:1)in high house-price regions,social integration is the primary push factor,and the main factors for retaining talents are the expectation of future work and intimate family relationships;2)in medium house-price regions,the main factors that attract talents are the current salary level and close family ties;3)in low house-price regions,living convenience is a determining factor in retaining talents.This study provides a new perspective for talent mobility research and offers valuable inputs for retaining and attracting talents in different economic development regions.Findings are of great significance for formulating talent introduction policies and forming a new pattern of rational spatial docking and effective allocation of human resources.展开更多
This paper analyzes some problems of the current teaching situation in the course High-level Programming Language,such as the lagging content of the course compared with technology development,the emphasis on theory r...This paper analyzes some problems of the current teaching situation in the course High-level Programming Language,such as the lagging content of the course compared with technology development,the emphasis on theory rather than on practice,the low enthusiasm of students for learning,and the weak practical ability of students.In response to the needs of enterprises for talents under the background of New Engineering,especially the cultivation of students’adaptability and practical abilities towards future industries to improve students’knowledge and problemsolving abilities to keep up with the modern technology,this paper proposes the ways and methods to reform and explore the teaching content and teaching methods by integrating industry and education,assisting teaching according to industrial demands,and lowering technology barriers of new technology.The practical effect is evaluated through a survey in class and the follow-up questionnaire after class,and the results show that the effect of the practice is effective.展开更多
基金Financial support for this work was provided by the General Program and Youth Fund Program of the National Natural Science Foundation of China(Grant Nos.42377175 and 42002292).
文摘Deep metal mines are often mined using the high-level pillars with subsequent cementation backfilling(HLSCB)mining method.At the design stage,it is therefore important to have a reasonable method for determining the shear strength of the high-level pillars(i.e.cohesion and internal friction angle)when they are supported by cemented backfilling.In this study,a formula was derived for the upper limit of the confining pressure σ3max on a high-level pillar supported by cemented backfilling in a deep metal mine.A new method of estimating the shear strength of such pillars was then proposed based on the Hoek eBrown failure criterion.Our analysis indicates that the horizontal stress σhh acting on the cemented backfill pillar can be simplified by expressing it as a constant value.A reasonable and effective value for σ3max can then be determined.The value of s3max predicted using the proposed method is generally less than 3 MPa.Within this range,the shear strength of the high-level pillar is accurately calculated using the equivalent MohreCoulomb theory.The proposed method can effectively avoid the calculation of inaccurate shear strength values for the high-level pillars when the original HoekeBrown criterion is used in the presence of large confining pressures,i.e.the situation in which the cohesion value is too large and the friction angle is too small can effectively be avoided.The proposed method is applied to a deep metal mine in China that is being excavated using the HLSCB method.The shear strength parameters of the high-level pillars obtained using the proposed method were input in the numerical simulations.The numerical results show that the recommended level heights and sizes of the high-level pillars and rooms in the mine are rational.
基金supported by the Guangdong Major Project of Basic and Applied Basic Research(No.2020B0301030003).
文摘Pyrite is one of the common authigenic minerals in marine sediments.Previous studies have shown that the morphological and isotopic characteristics of pyrite are closely related to the geochemical environment where it is formed.To better understand the for-mation mechanism of authigenic pyrite,we analyzed the isotopic composition,morphology,and distribution of pyrite in the sediment at 500m below the seafloor from Xisha Trough,South China Sea.Mineral morphologies were observed by scanning electron micros-copy and Raman spectrography.X-Ray computed tomography was applied to measure the particle size of pyrite.The size of pyrite crystals in the matrix sediment mainly ranged between 25 and 65µm(av.ca.40µm),although crystals were larger(av.ca.50μm)in the veins.The pyrites had a fine-grained truncated octahedral shape with occasionally well-developed growth steps,which implies the low growth rate and weak anaerobic oxidation of methane-sulfate reduction when pyrite was formed.Theδ^(34)S values of pyrites ranged from+20.8‰Vienna-defined Canyon Diablo Troilite(V-CDT)to+33.2‰V-CDT and from+44.8‰V-CDT to+48.9‰,which suggest two growth stages.In the first stage,with the continuous low methane flux,the pyrite possibly formed in an environment with good access to seawater.In the second stage,the pyrites mainly developed in sediment fractures and appeared in veins,probably due to the limited availability of sulfate.The less exposure of pyrite to the environment in the second stage was probably caused by sediment accumulation or perturbation.In this study,an episodic pyritization process was identified,and the paleoenvironment was reconstructed for the sediment investigated.
基金the National Natural Science Foundation of China(Grant Nos.41825010 and 42005024).
文摘The East Asian trough(EAT)profoundly influences the East Asian spring climate.In this study,the relationship of the EATs among the three spring months is investigated.Correlation analysis shows that the variation in March EAT is closely related to that of April EAT.Extended empirical orthogonal function(EEOF)analysis also confirms the co-variation of the March and April EATs.The positive/negative EEOF1 features the persistent strengthened/weakened EAT from March to April.Further investigation indicates that the variations in EEOF1 are related to a dipole sea surface temperature(SST)pattern over the North Atlantic and the SST anomaly over the tropical Indian Ocean.The dipole SST pattern over the North Atlantic,with one center east of Newfoundland Island and another east of Bermuda,could trigger a Rossby wave train to influence the EAT in March−April.The SST anomaly over the tropical Indian Ocean can change the Walker circulation and influence the atmospheric circulation over the tropical western Pacific,subsequently impacting the southern part of the EAT in March−April.Besides the SST factors,the Northeast Asian snow cover could change the regional thermal conditions and lead to persistent EAT anomalies from March to April.These three impact factors are generally independent of each other,jointly explaining large variations in the EAT EEOF1.Moreover,the signals of the three factors could be traced back to February,consequently providing a potential prediction source for the EAT variation in March and April.
文摘This study includes an experimental and numerical analysis of the performances of a parabolic trough collector(PTC)with and without cylindrical turbulators.The PTC is designed with dimensions of 2.00 m in length and 1.00 m in width.The related reflector is made of lined sheets of aluminum,and the tubes are made of stainless steel used for the absorption of heat.They have an outer diameter of 0.051 m and a wall thickness of 0.002 m.Water,used as a heat transfer fluid(HTF),flows through the absorber tube at a mass flow rate of 0.7 kg/s.The dimensions of cylindrical turbulators are 0.04 m in length and 0.047 m in diameter.Simulations are performed using the ANSYS Fluent 2020 R2 software.The PTC performance is evaluated by comparing the experimental and numerical outcomes,namely,the outlet temperature,useful heat,and thermal efficiency for a modified tube(MT)(tube with novel cylindrical turbulators)and a plain tube(PT)(tube without novel cylindrical turbulators).According to the results,the experimental outlet temperatures recorded 63.2°C and 50.5°C for the MT and PT,respectively.The heat gain reaches 1137.5 Win the MT and 685.8 Win the PT.Compared to the PT collector,the PTC exhibited a(1.64 times)higher efficiency.
基金supported by the National Natural Science Foundation of China(No.42276085)the National Basic Research Program of China(No.2013CB429702).
文摘The major and trace elemental compositions of clinopyroxene from basalt were used to characterize the nature of the primitive magma and structural environment beneath the southern Okinawa Trough(SOT),which is an initial back-arc basin at a continental margin.The clinopyroxenes in the basalt were augite with variable Mg^(#)contents(73.37-78.22).The regular variations in major oxide contents(i.e.,CaO,FeO,TiO_(2),and Cr)with decreasing Mg#implied that the clinopyroxenes evolved from being enriched in Mg,Ca,and Cr to being enriched in Fe and Ti.The clinopyroxenes had relatively low rare earth element concentrations(7.51×10^(-6) to 12.68×10^(-6))and negative Eu anomalies(δEu=0.67-0.95).The Kd_(cpx) values of clinopyroxenes(0.2-0.26),which were used to examine whether the clinopyroxene was equilibrated with its host basalt,demonstrate that these clinopyroxene phenocrysts were not captured crystals but were instead produced by crystallization differentiation of the magma.The calculated clinopyroxene crystallization temperatures showed a narrow range of 990-1061℃,and their crystallization pressures ranged from 2.0 to 3.2 kbar.The geochemistry features of these clinopyroxenes indicated that the parent magma belonged to the subalkaline tholeiitic magma series and suggested that the magma experienced crystallization differentiation of olivine,plagioclase,and clinopyroxene,where the crystallization of plagioclase occurred earlier than that of clinopyroxene.Combined with geophysical data,this research on primitive magma and its crystallization differentiation from clinopyroxene indicates that the SOT is in the stage of‘seafloor spreading’and that basaltic rocks produced from tholeiitic magma represent the generation of oceanic crust.
文摘Design and Development of a Parabolic Trough Solar Air Heater (PTSAH) for a Greenhouse Dryer (GD) was done to improve the dryer’s performance. The materials used for the fabrication of the PTSAH included galvanized sheets covered with aluminium foil, an absorber tube made of GI pipe painted matt black to increase heat absorbance at the focal line, mild steel square tubes, shutter plywood, and an axial fan to push air through the absorber tube. Key geometrical parameters used for the design of the PTSAH were a rim angle of 98 degrees, focal length of 0.2608 m, height of 0.3451 m, length of 2 m, and an aperture width of 1.2 m. The PTSAH’s total aperture surface area was 2.4 m2, while its absorber tube surface area was 0.1587 m2. The PTSAH was experimentally tested to establish its thermal performance. It was found that the ambient air recorded an average value of 31.1˚C and that the air heater could increase the air temperature by 45.6˚C above ambient with a thermal efficiency of 5.3%. It can, therefore, be concluded that the PTSAH can significantly improve the performance of a GD by supplying the GD with air at a higher temperature than ambient.
文摘A parabolic trough solar collector(PTSC)converts solar radiation into thermal energy.However,low thermal efficiency of PTSC poses a hindrance to the deployment of solar thermal power plants.Thermal performance of PTSC is enhanced in this study by incorporating magnetic nanoparticles into the working fluid.The circular receiver pipe,with dimensions of 66 mm diameter,2 mm thickness,and 24 m length,is exposed to uniform temperature and velocity conditions.The working fluid,Therminol-66,is supplemented with Fe3O4 magnetic nanoparticles at concentrations ranging from 1%to 4%.The findings demonstrate that the inclusion of nanoparticles increases the convective heat transfer coefficient(HTC)of the PTSC,with higher nanoparticle volume fractions leading to greater heat transfer but increased pressure drop.The thermal enhancement factor(TEF)of the PTSC is positively affected by the volume fraction of nanoparticles,both with and without a magnetic field.Notably,the scenario with a 4%nanoparticle volume fraction and a magnetic field strength of 250 G exhibits the highest TEF,indicating superior thermal performance.These findings offer potential avenues for improving the efficiency of PTSCs in solar thermal plants by introducing magnetic nanoparticles into the working fluid.
文摘This paper explores strategies to cultivate high-level technical talents in vocational undergraduate colleges by analyzing their development,the essence of such talents,and proposing several key measures.Strategies include optimizing professional settings and curricula,enhancing school-enterprise cooperation and the integration of industry-university-research,improving teaching staff quality and educational standards,and expanding international cooperation.The importance of policy support and funding and establishing robust quality assurance systems is emphasized for effectively cultivating skilled talents in vocational undergraduate colleges.
基金funded as a key clinical project of Peking University Third Hospital [No. BYSY2018021]funded by Beijing Natural Science Foundation [7212128]。
文摘Objective This study aimed to evaluate the clinical benefits of a vancomycin dosage strategy based on a serum trough concentration model in elderly patients.Methods This prospective single-center, open-label, randomized controlled trial categorized 66 elderly patients with severe pneumonia into study and control groups. The control group received vancomycin using a regimen decided by the attending physician. Meanwhile, the study group received individualized vancomycin therapy with a dosing strategy based on a serum trough concentration model. The primary endpoint was the proportion of patients with serum trough concentrations reaching the target values.The secondary endpoints were clinical response, vancomycin treatment duration, and vancomycinassociated acute kidney injury(VA-AKI) occurrence.Results All patients were at least 60 years old(median age = 81 years). The proportion of patients with target trough concentration achievement(≥ 15 mg/L) with the initial vancomycin regimen was significantly higher in the study group compared to the control group(75.8% vs. 42.4%, P = 0.006).Forty-five patients(68.2%) achieved clinical success, the median duration of vancomycin therapy was10.0 days, and VA-AKI occurred in eight patients(12.1%). However, there were no significant differences in these parameters between the two groups. The model for predicting vancomycin trough concentrations was upgraded to: serum trough concentration(mg/L) = 17.194-0.104 × creatinine clearance rate(mL/min) + 0.313 × vancomycin daily dose [mg/(kg·d)].Conclusion A vancomycin dosage strategy based on a serum trough concentration model can improve the proportion of patients achieving target trough concentrations in elderly patients with severe pneumonia.
基金Supported by the PetroChina Science and Technology Project (2021DJ0605,2022KT0101)the CNPC Major Science and Technology Project (2021DJ0501)。
文摘Based on the latest drilling, seismic and field outcrop data, the geological characteristics(e.g. strata, development and sedimentary evolution) of the southern segment of the Late Sinian–Early Cambrian Deyang–Anyue rift trough in the Sichuan Basin are analyzed. First, the strata in the southern segment are complete. The first to second members of Dengying Formation(Deng 1 + Deng 2) are found with relatively stable thickness(400–550 m), and the third to fourth members(Deng 3+ Deng 4) show great thickness difference between the marginal trough and the inner trough, which is up to 250 m. The Cambrian Maidiping Formation and Qiongzhusi Formation in southern Sichuan Basin are relatively thin, with the thickness changing greatly and frequently. Second, the Deyang–Anyue rift trough extended southward during the Deng 4 period, affecting southern Sichuan Basin. Compared to the middle and northern segments of the rift trough, the southern segment is generally wide, gentle and shallow, with multiple steps, and alternating uplifts and sags, which are distributed in finger shape. Third, the Deng 1 + Deng 2 in southern Sichuan Basin records the dominance of carbonate platform and unobvious sedimentary differentiation, and the Deng 4 exhibits obvious sedimentary differentiation, namely, basin–slope–secondary slope–slope–secondary slope–platform margin–restricted platform, from the inner trough to the marginal trough. Fourth, the rift trough in southern Sichuan Basin has evolved in four stages: stabilization of Deng 1–Deng 2, initialization of Deng 3–Deng 4, filling of Maidiping–Qiongzhusi, and extinction of Canglangpu Formation.
文摘In order to improve the performance of Al_(2)O_(3)-SiC-C castables for iron trough,samples were prepared using brown corundum,dense corundum,activated alumina micropowder,ball pitch,and silicon as main raw materials,calcium aluminate cement as the binder.Several kinds of silica fumes(93SiO_(2),96SiO_(2),and 99SiO_(2))with different particle size distributions and chemical composition were added to research the effects on the properties of castables.The results show that the sample with 99SiO_(2) fume has high water requirement for molding,but the bulk density is the lowest,the apparent porosity is the highest,the oxidation resistance is the worst,and the permanent linear change on heating is low after firing at 1 450 ℃ for 3 h.The bulk density and the apparent porosity of the sample with 93SiO_(2) fume or 96SiO_(2) fume are equivalent,the hot modulus of rupture of the sample with 93SiO_(2) fume is the lowest,and the slag resistance of the sample with 96SiO_(2) fume is the best.The comprehensive performance of the sample with 96SiO_(2) fume is the best.
文摘The Mamfe Basin has been the subject of many studies,but some debates persist,especially concerning the stratigraphic nomenclature,corundum origin,and marine transgression.The aims of this work are(1)to propose a new lithostratigraphic nomenclature of the Mamfe Basin formation based on new field observations,(2)to determine the source rock distribution and the origin of gem deposits and(3)to correlate the Cameroon section of the Mamfe Basin with the Nigerian deposits.The main results show that the name Manyu River Group is more appropriate as the Manyu River crosses all the facies in the Mamfe sedimentary Basin belonging to the Manyu Division.According to the facies analysis,the age of deposition,the mineralogic and geochemical data such as the V vs.Al2O3andΣREE vs.Al_(2)O_(3),TiO_(2)MgO,Na_(2)O,P_(2)O_(5),and CaO diagrams,this Group is composed of at least five Formations,including four Cretaceous Formations,from bottom to top:the Etoko Formation(alluvial and fluvial channel to fluvio-lacustrine deposits),the Nfaitok Formation(lagoonal deposits),the Bachuo Ntai Formation(fluvial braided channels or fluvio-deltaic environment)and the Eyumojock/NsanaragatiFormation(fluvio-lacustrine deposits)and the new Cenozoic Formation named Bakebe Formation(fluvio-lacustrine deposits).The gem minerals such as corundum,rutile,or tourmaline in the Cretaceous deposits of the Mamfe Basin are mainly detrital as indicated by the presence of worn shapes and fragments of these minerals.The presence of sapphire in the AlboCenomanian deposits indicates a Precambrian age of the felsic source rock,likely the plutonic rocks such as granite or pegmatite as indicated by the abundance of tourmaline and high LREE/HREE ratios(14.81–34.29)and slightly negative and positive Eu anomalies(0.85–1.15).This marine incursion in the Mamfe Basin was probably from West Nigeria,according to the geographic location of the Mamfe Basin and the general palaeogeographic evolution of the Benue Trough.
文摘Background: The 2020 consensus guidelines recommend AUC guided dosing as the preferred monitoring method for vancomycin. AUC based dosing has shown to reduce incidence of acute kidney injury (AKI), utilize lower daily doses in obese patients, and maintain efficacy. Several institutions have adjusted their protocols to utilize AUC guided dosing. However, there are limited studies comparing the clinical outcomes of AUC versus trough monitoring. Methods: This was a retrospective, observational, single centered study. The primary outcome was to evaluate the clinical success of AUC dosing versus trough based dosing of vancomycin for MRSA infections using a composite outcome of afebrile post treatment ( Results: Forty-seven patients were included in this study, 17 in the AUC group and 30 in the trough group. The primary composite outcome showed a significant benefit of AUC dosing (p = 0.04). The composite component culture clearance showed the largest improvement for the AUC group when compared with the trough group (p = 0.03). More patients achieved therapeutic target attainment and reached the target sooner (3 days versus 4 days, p = 0.2) in the AUC group. Over the study course, 94.1% of patients in the AUC group were considered therapeutic compared to 63.8% in the trough group (p = 0.03). Vancomycin levels were collected less frequently in the AUC group (3 versus 4, p = 0.2). Conclusion: The outcomes of this study may suggest AUC guided dosing as a beneficial alternative to trough based dosing. AUC based dosing may improve clinical success which can be further explored in larger prospective clinical trials.
文摘The present study discusses the thermal performance of the receiver tube,which contains a wall with various fin shapes in the parabolic trough collector.Inserted fins and bulge surfaces of the inner wall of the receiver tube increase the turbulent fluid flow.In pursuance of uniform distribution of heat transfer,various fin shapes such as square-shape,circle-shape,triangle-shape,and combined square-circle shapes were inserted,examined,and compared.A study of the temperature differences and fluid flow is meaningful for this project therefore finite volume method was used to investigate heat transfer.Also,hybrid Nano-Fluid AL_(2)O_(3-)CuO,TiO_(2-)Cu,and AgMgO were applied to increase thermal diffusivity.When the combined square-circle-shaped fin was inserted,the thermal peak of fluid flow in the receiver tube was lower than the other studied fin shapes by almost 1%.Besides,the hybrid nano-fluid Ag-MgO Syltherm-oil-800 has lower thermal waste in comparison to others by more than 3%.
基金This work is supported by Chinese Arctic and Antarctic Administration(Grant no.IRASCC2020-2022)National Key R&D Program of China(Grant no.2018YFA0605701).
文摘The melting of the West Antarctic Ice Shelf has increased since the 1990s,driven by the relatively warm Circumpolar Deep Water(CDW)that penetrates into the West Antarctic Ice Shelf cavities through submarine glacial troughs across the continental shelf.In this study,temperature,salinity,and current velocity data obtained by the Chinese National Antarctic Research Expedition in the Dotson-Getz Trough(DGT)shows clear differences in distribution of modified Circumpolar Deep Water(mCDW)in the summers of 2020 and 2022.Combined with contemporaneous wind data and additional temperature and salinity data from instrumented seals,the processes and mechanisms responsible for this variation are discussed.Compared with 2020,there is a significant increase in mCDW thickness in 2022,with a doubling of total heat content as the mCDW inflow path across the DGT shifts towards the eastern bank.We propose that a southward shift in the westerly winds in the summer of 2022 moved the upper oceanic divergence zone southward towards the continental slope,promoting the upwelling of mCDW above 500 m.Concurrently,stronger westerly winds over the continental slope strengthened the eastward undercurrent,increasing the transport of this mCDW and its associated heat content to the DGT through Ekman dynamics.These observations show there is strong interannual variability in the strength,path and extent of mCDW inflows to the DGT and that care must be taken when planning observation programs for long-term monitoring of the oceanic heat input to the ice shelves of this globally significant region.
基金Under the auspices of National Natural Science Foundation of China (No. 72274143) and (No.71874127)
文摘Rapid urbanization and population growth have triggered an increase in urban housing demand and rising housing prices,which can influence the migration intention of high-level talents.Much work within the literature has focused more on the migration of the general public.However,antecedents of migration intention and the impact of housing prices on the migration of high-level talents remain unclear.Therefore,based on the push-pull theory,this study investigates the influencing factors of talent migration intention and explores the role of housing prices.This study reveals a complex mechanism underlying migration decisions by using logistic regression models and survey data of high-level talents in the Pearl River Delta(PRD)megalopolis of China.The results indicate that:1)in high house-price regions,social integration is the primary push factor,and the main factors for retaining talents are the expectation of future work and intimate family relationships;2)in medium house-price regions,the main factors that attract talents are the current salary level and close family ties;3)in low house-price regions,living convenience is a determining factor in retaining talents.This study provides a new perspective for talent mobility research and offers valuable inputs for retaining and attracting talents in different economic development regions.Findings are of great significance for formulating talent introduction policies and forming a new pattern of rational spatial docking and effective allocation of human resources.
文摘This paper analyzes some problems of the current teaching situation in the course High-level Programming Language,such as the lagging content of the course compared with technology development,the emphasis on theory rather than on practice,the low enthusiasm of students for learning,and the weak practical ability of students.In response to the needs of enterprises for talents under the background of New Engineering,especially the cultivation of students’adaptability and practical abilities towards future industries to improve students’knowledge and problemsolving abilities to keep up with the modern technology,this paper proposes the ways and methods to reform and explore the teaching content and teaching methods by integrating industry and education,assisting teaching according to industrial demands,and lowering technology barriers of new technology.The practical effect is evaluated through a survey in class and the follow-up questionnaire after class,and the results show that the effect of the practice is effective.
