A method of data processing to determine the coefficients of linearization equations for 1050 anemometer (produced by Thermo-Systems Inc. -TSI, USA) with the sensors made of domestic hot wire using the program preferr...A method of data processing to determine the coefficients of linearization equations for 1050 anemometer (produced by Thermo-Systems Inc. -TSI, USA) with the sensors made of domestic hot wire using the program preferred in this Paper is described. By calculation and test, it is indicated that the error resulting from this method is about 0. 5% of the full scale and less than TSl's. By using this method we can set up the calibration curve according to the measurement range and the diameter of the hot wire at a certain accuracy.展开更多
An adaptive response compensation technique has been proposed to compensate for the response lag of the constant-current hot-wire anemometer (CCA) by taking advantage of digital signal processing technology. First, we...An adaptive response compensation technique has been proposed to compensate for the response lag of the constant-current hot-wire anemometer (CCA) by taking advantage of digital signal processing technology. First, we have developed a simple response compensation scheme based on a precise theoretical expression for the frequency response of the CCA (Kaifuku et al. 2010, 2011), and verified its effectiveness experimentally for hot-wires of 5 μm, 10 μm and 20 μm in diameter. Then, another novel technique based on a two-sensor probe technique—originally developed for the response compensation of fine-wire thermocouples (Tagawa and Ohta 1997;Tagawa et al. 1998)—has been proposed for estimating thermal time-constants of hot-wires to realize the in-situ response compensation of the CCA. To demonstrate the usefulness of the CCA, we have applied the response compensation schemes to multipoint velocity measure- ment of a turbulent wake flow formed behind a circular cylinder by using a CCA probe consisting of 16 hot-wires, which were driven simultaneously by a very simple constant-current circuit. As a result, the proposed response compensation techniques for the CCA work quite successfully and are capable of improving the response speed of the CCA to obtain reliable measurements comparable to those by the commercially-available constant-temperature hot-wire anemometer (CTA).展开更多
A sensitivity-enhanced hot-wire anemometer based on a cladding-etched optical fiber Bragg grating(FBG)coated with a layer of silver film and optically heated by using a 1480nm laser diode is demonstrated.The silver fi...A sensitivity-enhanced hot-wire anemometer based on a cladding-etched optical fiber Bragg grating(FBG)coated with a layer of silver film and optically heated by using a 1480nm laser diode is demonstrated.The silver film absorbs the laser power to heat the FBG to a certain high temperature and the airflow cools down the FBG hot-wire with the cooling effect and hence the Bragg wavelength of the FBG is determined by the airflow velocity.Experimental measurement results show that the heating efficiency of the FBG hot wire is improved by 3.8times in magnitude by etching the fiber cladding from 125μm down to 73.4μm,and the achieved airflow velocity sensitivities,under a laser power of 200mW,are–3180pm/(m/s),–889pm/(m/s),–268pm/(m/s),and–8.7pm/(m/s)at different airflow velocities of 0.1m/s,0.5m/s,1.5m/s,and 17m/s,respectively.In comparison,the sensitivities are only–2193 pm/(m/s),–567 pm/(m/s),–161 pm/(m/s),and–4.9pm/(m/s)for the reference anemometer without cladding etching even at a much higher heating laser power of 530mW.These results prove that the method by using a cladding-etched FBG to improve sensitivity of FBG-based hot-wire anemometers works and the sensitivity is improved significantly.展开更多
The typical location and number of anemometer towers in the assessed area are the key to the accuracy of wind resource assessment in complex topography.As calculation examples,this paper used two typical complex topog...The typical location and number of anemometer towers in the assessed area are the key to the accuracy of wind resource assessment in complex topography.As calculation examples,this paper used two typical complex topography wind farms in Guangxi,Yunnan province in China.Firstly,we simulated the wind resource status of the anemometer tower in the Meteodyn WT software.Secondly,we compared the simulated wind resource with the actual measured data by the anemometer tower in the same situation.Thirdly,we analyzed the influence of anemometer tower location and quantity in the accuracy of wind resource assessment through the comparison results.The results showed that the range which the anemometer tower can represent is limited(<5 kilometers),and the prediction error more than 5%.Besides,the anemometer towers in special terrain areas(such as wind acceleration areas)cannot be used as a representative choice.The relative error of the simulated average annual wind speed by choose different number of anemometer towers is about 4%,and the grid-connected power generation more than 6%.The representative effect of anemometer towers is of crucial for improving the accuracy of wind resource assessment in engineering applications.展开更多
To find the optimal location for large-aperture telescopes is a goal of astronomy. Chinese Antarctic astronomy has begun to flourish in recent years, and it is an urgent need in basic astronomical work to measure and ...To find the optimal location for large-aperture telescopes is a goal of astronomy. Chinese Antarctic astronomy has begun to flourish in recent years, and it is an urgent need in basic astronomical work to measure and analyze the optical turbulence spatiotemporal distribution in the Antarctic region. We analyzed turbulence data measured by a mobile atmospheric parameter measurement system from 30 December 2013 to 10 February 2014 at Antarctic Taishan Station. Because there is a discrepancy between the refractive index structure constant Cn2 measured by an ultrasonic anemometer with a single-point temperature structure function method and by micro-thermometer, a new method to measure C,2 with a temperature spectrum method is proposed herein. Through comparing long-term continuous Cn2 data derived from ultrasonic anemometer with those via the new method and micro-thermometer, trend, magnitude and measured weak turbulence of-2× 10-16m-2/3 are generally satisfactory. The reason for the discrepancy in Cn2 measurement between the ultrasonic anemometer with the old method and micro-thermometer is investigated.展开更多
Using structured mesh to discretize the calculation region, the wind velocity and pressure distribution in front of the wind barrier under different embankment heights are investigated based on the Detached Eddy Simul...Using structured mesh to discretize the calculation region, the wind velocity and pressure distribution in front of the wind barrier under different embankment heights are investigated based on the Detached Eddy Simulation(DES) with standard SpalartAllmaras(SA) model. The Reynolds number is 4.0×105 in this calculation. The region is three-dimensional. Since the wind barrier and trains are almost invariable cross-sections, only 25 m along the track is modeled. The height of embankment ranges from 1 m to 5 m and the wind barrier is 3 m high. The results show that the wind speed changes obviously before the wind barrier on the horizontal plane, which is 4.5 m high above the track. The speed of wind reduces gradually while approaching the wind barrier. It reaches the minimum value at a distance about 5 m before the wind barrier, and increases dramatically afterwards. The speed of wind at this location is linear with the speed of far field. The train aerodynamic coefficients decrease sharply with the increment of the embankment height. And they take up the monotonicity. Meanwhile, when the height increases from 3 m to 5 m, they just change slightly. It is concluded that the optimum anemometer location is nearly 5 m in front of the wind barrier.展开更多
A four cup commercial anemometer is modified as follows. Two cups with arms extending from the pivot are removed. The other two half spherical cups are re-placed by identical double cones, each of which is composed of...A four cup commercial anemometer is modified as follows. Two cups with arms extending from the pivot are removed. The other two half spherical cups are re-placed by identical double cones, each of which is composed of two cones of different altitudes joined at the bases that are the same size. There is a stiff wire connecting the two double cones to the pivot at the midpoint so they are free to spin in the horizontal plane. They are parallel but oppositely oriented. When a fan is turned on aiming an air stream toward the double cones, they constantly rotate. Increasing the distance between the long axes of the two double cones causes the rotation rate to increase for the same setting of the fan. These results are qualitatively explained by reaction forces of a flowing fluid acting on the surfaces of solid bodies with front to back asymmetry in accord with Newton’s 3rd law (action equals reaction) published by the author earlier. Besides calibrating the modified anemometer for measuring wind speed, another practical application of the concept may be the generation of electricity by the natural winds.展开更多
The intact stability and damage stability of a model of an anemometer tower with buoyancy tank foundation are computed by the finite element software MOSES in this paper. The natural period of the anemometer tower is ...The intact stability and damage stability of a model of an anemometer tower with buoyancy tank foundation are computed by the finite element software MOSES in this paper. The natural period of the anemometer tower is discussed through frequency domain analysis. The influence of a single factor, such as towing point position, wave height, wave direction and wave period, on towing stability is discussed through time domain analysis. At the same time, the towing stability under the condition of various combinations of many factors is analyzed based on the measured data of the target area. Computer simulation results show that the intact stability is preferable and the damage stability is sufficient under the condition of plenty of subdivisions. Within the scope of the buoyancy tank foundation,the higher the towing point position is, the better the stability is. Wave height has a great impact on the motion amplitude of buoyancy tank foundation, but the effect on the acceleration is not obvious; wave period has a great impact on the acceleration, while the effect on the motion amplitude is not obvious; following-waves towing is more conducive to safety than atry.展开更多
Effects caused by precipitation on the measurements of three-dimensional sonic anemometer are analyzed based on a field observational experiment conducted in Maoming, Guangdong Province, China. Obvious fluctuations in...Effects caused by precipitation on the measurements of three-dimensional sonic anemometer are analyzed based on a field observational experiment conducted in Maoming, Guangdong Province, China. Obvious fluctuations induced by precipitation are observed for the outputs of sonic anemometer-derived temperature and wind velocity components. A technique of turbulence spectra and cospectra normalized in the framework of similarity theory is utilized to validate the measured variables and calculated fluxes. It is found that the sensitivity of sonic anemometer-derived temperature to precipitation is significant, compared with that of the wind velocity components. The spectra of wind velocity and cospectra of momentum flux resemble the standard universal shape with the slopes of the spectra and cospectra at the inertial subrange, following the-2/3 and-4/3 power law, respectively, even under the condition of heavy rain. Contaminated by precipitation, however, the spectra of temperature and cospectra of sensible heat flux do not exhibit a universal shape and have obvious frequency loss at the inertial subrange. From the physical structure and working principle of sonic anemometer, a possible explanation is proposed to describe this difference, which is found to be related to the variations of precipitation particles. Corrections for errors of sonic anemometer-derived temperature under precipitation is needed, which is still under exploration.展开更多
At present,the verification system of wind speed in national 3MS provincial automatic weather station has been automated,but the wind speed verification of the DEM6 portable three-cup anemometer by the straight road w...At present,the verification system of wind speed in national 3MS provincial automatic weather station has been automated,but the wind speed verification of the DEM6 portable three-cup anemometer by the straight road wind tunnel cannot be automated.In order to record the reading of this verification,it is necessary to manually move the starting lever at the wind speed field during each verification.For this problem,a set of verification device for the DEM6 portable three-cup anemometer is developed based on automatic verification system of wind speed in the 3MS provincial automatic weather station.This device uses the the driving board of starting anemometer to connect with the pressing starting lever by a bar-shaped gap,so as to realize the remote control of the starting lever.It is convenient to use,and measure multiple sets of data at the same place.The measuring results are more accurate,thereby realizing automatic pressing of wind speed starting lever.展开更多
A commercial anemometer was modified by replacing the four cups with four identical two-dimensional blades, each with a circular arc side and a flat side. The flat sides are fixed to four arms radiating from a pivot s...A commercial anemometer was modified by replacing the four cups with four identical two-dimensional blades, each with a circular arc side and a flat side. The flat sides are fixed to four arms radiating from a pivot so that they are parallel to the wind direction. The rounded sides all point in the same direction around a circle. When the wind blows, there is a lift force on the rounded side of each blade and they unite in causing rotation about the pivot with the curved sides leading. The more blades the faster the rotation is a prediction.展开更多
文摘A method of data processing to determine the coefficients of linearization equations for 1050 anemometer (produced by Thermo-Systems Inc. -TSI, USA) with the sensors made of domestic hot wire using the program preferred in this Paper is described. By calculation and test, it is indicated that the error resulting from this method is about 0. 5% of the full scale and less than TSl's. By using this method we can set up the calibration curve according to the measurement range and the diameter of the hot wire at a certain accuracy.
文摘An adaptive response compensation technique has been proposed to compensate for the response lag of the constant-current hot-wire anemometer (CCA) by taking advantage of digital signal processing technology. First, we have developed a simple response compensation scheme based on a precise theoretical expression for the frequency response of the CCA (Kaifuku et al. 2010, 2011), and verified its effectiveness experimentally for hot-wires of 5 μm, 10 μm and 20 μm in diameter. Then, another novel technique based on a two-sensor probe technique—originally developed for the response compensation of fine-wire thermocouples (Tagawa and Ohta 1997;Tagawa et al. 1998)—has been proposed for estimating thermal time-constants of hot-wires to realize the in-situ response compensation of the CCA. To demonstrate the usefulness of the CCA, we have applied the response compensation schemes to multipoint velocity measure- ment of a turbulent wake flow formed behind a circular cylinder by using a CCA probe consisting of 16 hot-wires, which were driven simultaneously by a very simple constant-current circuit. As a result, the proposed response compensation techniques for the CCA work quite successfully and are capable of improving the response speed of the CCA to obtain reliable measurements comparable to those by the commercially-available constant-temperature hot-wire anemometer (CTA).
基金Sponsor and financial support acknowledgments are placed here.This work was supported by National Key Research and Development Program of China(Grant No.2020YFB1805804),National Natural Science Foundation of China(Grant No.11974083),Open Projects Foundation(Grant No.SKLD1905)of State Key Laboratory of Optical Fiber and Cable Manufacture Technology(YOFC),and the Program for Guangdong Introducing Innovative and Entrepreneurial Teams(Grant No.2019ZT08X340).
文摘A sensitivity-enhanced hot-wire anemometer based on a cladding-etched optical fiber Bragg grating(FBG)coated with a layer of silver film and optically heated by using a 1480nm laser diode is demonstrated.The silver film absorbs the laser power to heat the FBG to a certain high temperature and the airflow cools down the FBG hot-wire with the cooling effect and hence the Bragg wavelength of the FBG is determined by the airflow velocity.Experimental measurement results show that the heating efficiency of the FBG hot wire is improved by 3.8times in magnitude by etching the fiber cladding from 125μm down to 73.4μm,and the achieved airflow velocity sensitivities,under a laser power of 200mW,are–3180pm/(m/s),–889pm/(m/s),–268pm/(m/s),and–8.7pm/(m/s)at different airflow velocities of 0.1m/s,0.5m/s,1.5m/s,and 17m/s,respectively.In comparison,the sensitivities are only–2193 pm/(m/s),–567 pm/(m/s),–161 pm/(m/s),and–4.9pm/(m/s)for the reference anemometer without cladding etching even at a much higher heating laser power of 530mW.These results prove that the method by using a cladding-etched FBG to improve sensitivity of FBG-based hot-wire anemometers works and the sensitivity is improved significantly.
基金the financial support by the National Natural Science Foundation of China(No.52176212).
文摘The typical location and number of anemometer towers in the assessed area are the key to the accuracy of wind resource assessment in complex topography.As calculation examples,this paper used two typical complex topography wind farms in Guangxi,Yunnan province in China.Firstly,we simulated the wind resource status of the anemometer tower in the Meteodyn WT software.Secondly,we compared the simulated wind resource with the actual measured data by the anemometer tower in the same situation.Thirdly,we analyzed the influence of anemometer tower location and quantity in the accuracy of wind resource assessment through the comparison results.The results showed that the range which the anemometer tower can represent is limited(<5 kilometers),and the prediction error more than 5%.Besides,the anemometer towers in special terrain areas(such as wind acceleration areas)cannot be used as a representative choice.The relative error of the simulated average annual wind speed by choose different number of anemometer towers is about 4%,and the grid-connected power generation more than 6%.The representative effect of anemometer towers is of crucial for improving the accuracy of wind resource assessment in engineering applications.
基金supported by the National Natural Science Foundation of China (Grant no. 41275020)supported by the Chinese Polar Environment Comprehensive Investigation & Assessment Programs (Grant nos. CHINARE2013-02-03, CHINARE2014-02 -03, and CHINARE201502-03)+1 种基金the Polar Science Innovation Fund for Young Scientists of Polar Research Institute of China (Grant no. CX20130201)the Shanghai Natural Science Foundation (Grant no. 14ZR1444100).
文摘To find the optimal location for large-aperture telescopes is a goal of astronomy. Chinese Antarctic astronomy has begun to flourish in recent years, and it is an urgent need in basic astronomical work to measure and analyze the optical turbulence spatiotemporal distribution in the Antarctic region. We analyzed turbulence data measured by a mobile atmospheric parameter measurement system from 30 December 2013 to 10 February 2014 at Antarctic Taishan Station. Because there is a discrepancy between the refractive index structure constant Cn2 measured by an ultrasonic anemometer with a single-point temperature structure function method and by micro-thermometer, a new method to measure C,2 with a temperature spectrum method is proposed herein. Through comparing long-term continuous Cn2 data derived from ultrasonic anemometer with those via the new method and micro-thermometer, trend, magnitude and measured weak turbulence of-2× 10-16m-2/3 are generally satisfactory. The reason for the discrepancy in Cn2 measurement between the ultrasonic anemometer with the old method and micro-thermometer is investigated.
基金Projects(51075401,U1334205)supported by the National Natural Science Foundation of ChinaProject(NCET-10-0833)supported by the New Century Excellent Talents in University,China+2 种基金Project supported by the Scholarship Award for Excellent Innovative Doctoral Student granted by Central South University,ChinaProject(2012T002-E)supported by the Science and Technology Research and Development Program of Ministry of Railway,ChinaProject(14JJ1003)supported by the Natural Science Foundation of Hunan Province,China
文摘Using structured mesh to discretize the calculation region, the wind velocity and pressure distribution in front of the wind barrier under different embankment heights are investigated based on the Detached Eddy Simulation(DES) with standard SpalartAllmaras(SA) model. The Reynolds number is 4.0×105 in this calculation. The region is three-dimensional. Since the wind barrier and trains are almost invariable cross-sections, only 25 m along the track is modeled. The height of embankment ranges from 1 m to 5 m and the wind barrier is 3 m high. The results show that the wind speed changes obviously before the wind barrier on the horizontal plane, which is 4.5 m high above the track. The speed of wind reduces gradually while approaching the wind barrier. It reaches the minimum value at a distance about 5 m before the wind barrier, and increases dramatically afterwards. The speed of wind at this location is linear with the speed of far field. The train aerodynamic coefficients decrease sharply with the increment of the embankment height. And they take up the monotonicity. Meanwhile, when the height increases from 3 m to 5 m, they just change slightly. It is concluded that the optimum anemometer location is nearly 5 m in front of the wind barrier.
文摘A four cup commercial anemometer is modified as follows. Two cups with arms extending from the pivot are removed. The other two half spherical cups are re-placed by identical double cones, each of which is composed of two cones of different altitudes joined at the bases that are the same size. There is a stiff wire connecting the two double cones to the pivot at the midpoint so they are free to spin in the horizontal plane. They are parallel but oppositely oriented. When a fan is turned on aiming an air stream toward the double cones, they constantly rotate. Increasing the distance between the long axes of the two double cones causes the rotation rate to increase for the same setting of the fan. These results are qualitatively explained by reaction forces of a flowing fluid acting on the surfaces of solid bodies with front to back asymmetry in accord with Newton’s 3rd law (action equals reaction) published by the author earlier. Besides calibrating the modified anemometer for measuring wind speed, another practical application of the concept may be the generation of electricity by the natural winds.
基金Supported by the National High Technology Research and Development Program of China("863"Program,No.2012AA051705)International Science and Technology Cooperation Program of China(No.2012DFA70490)+1 种基金National Natural Science Foundation of China(No.51109160)Tianjin Natural Science Foundation(No.13JCYBJC19100)
文摘The intact stability and damage stability of a model of an anemometer tower with buoyancy tank foundation are computed by the finite element software MOSES in this paper. The natural period of the anemometer tower is discussed through frequency domain analysis. The influence of a single factor, such as towing point position, wave height, wave direction and wave period, on towing stability is discussed through time domain analysis. At the same time, the towing stability under the condition of various combinations of many factors is analyzed based on the measured data of the target area. Computer simulation results show that the intact stability is preferable and the damage stability is sufficient under the condition of plenty of subdivisions. Within the scope of the buoyancy tank foundation,the higher the towing point position is, the better the stability is. Wave height has a great impact on the motion amplitude of buoyancy tank foundation, but the effect on the acceleration is not obvious; wave period has a great impact on the acceleration, while the effect on the motion amplitude is not obvious; following-waves towing is more conducive to safety than atry.
基金supported by the National Key Basic Research Program of China (Grant Nos. 2014CB953903,2015CB953904)the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDA 11010403)the CAS/SAFEA International Partnership Program for Creative Research Teams
文摘Effects caused by precipitation on the measurements of three-dimensional sonic anemometer are analyzed based on a field observational experiment conducted in Maoming, Guangdong Province, China. Obvious fluctuations induced by precipitation are observed for the outputs of sonic anemometer-derived temperature and wind velocity components. A technique of turbulence spectra and cospectra normalized in the framework of similarity theory is utilized to validate the measured variables and calculated fluxes. It is found that the sensitivity of sonic anemometer-derived temperature to precipitation is significant, compared with that of the wind velocity components. The spectra of wind velocity and cospectra of momentum flux resemble the standard universal shape with the slopes of the spectra and cospectra at the inertial subrange, following the-2/3 and-4/3 power law, respectively, even under the condition of heavy rain. Contaminated by precipitation, however, the spectra of temperature and cospectra of sensible heat flux do not exhibit a universal shape and have obvious frequency loss at the inertial subrange. From the physical structure and working principle of sonic anemometer, a possible explanation is proposed to describe this difference, which is found to be related to the variations of precipitation particles. Corrections for errors of sonic anemometer-derived temperature under precipitation is needed, which is still under exploration.
文摘At present,the verification system of wind speed in national 3MS provincial automatic weather station has been automated,but the wind speed verification of the DEM6 portable three-cup anemometer by the straight road wind tunnel cannot be automated.In order to record the reading of this verification,it is necessary to manually move the starting lever at the wind speed field during each verification.For this problem,a set of verification device for the DEM6 portable three-cup anemometer is developed based on automatic verification system of wind speed in the 3MS provincial automatic weather station.This device uses the the driving board of starting anemometer to connect with the pressing starting lever by a bar-shaped gap,so as to realize the remote control of the starting lever.It is convenient to use,and measure multiple sets of data at the same place.The measuring results are more accurate,thereby realizing automatic pressing of wind speed starting lever.
文摘A commercial anemometer was modified by replacing the four cups with four identical two-dimensional blades, each with a circular arc side and a flat side. The flat sides are fixed to four arms radiating from a pivot so that they are parallel to the wind direction. The rounded sides all point in the same direction around a circle. When the wind blows, there is a lift force on the rounded side of each blade and they unite in causing rotation about the pivot with the curved sides leading. The more blades the faster the rotation is a prediction.
