Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utili...Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utilization of active materials with increasing the thickness of electrodes for aqueous batteries,resulting in battery performance deterioration with a reduced capacity.Here,we demonstrate that controlling the hydrophilicity of the thicker electrodes is critical to enhancing the overall energy density of batteries.Hydrophilic binders are synthesized via a simple sulfonation process of conventional polyvinylidene fluoride binders,considering physicochemical properties such as mechanical properties and adhesion.The introduction of abundant sulfonate groups of binders(i)allows fast and sufficient electrolyte wetting,and(ii)improves ionic conduction in thick electrodes,enabling a significant increase in reversible capacities under various current densities.Further,the sulfonated binder effectively inhibits the dissolution of cathode materials in reactive aqueous electrolytes.Overall,our findings significantly enhance the energy density and contribute to the development of practical zinc-ion batteries.展开更多
Phytosterols have received extensive attention owing to their excellent cholesterol-lowering activity and the role in cardiovascular diseases prevention. However, poor solubility in both oil and water limited the appl...Phytosterols have received extensive attention owing to their excellent cholesterol-lowering activity and the role in cardiovascular diseases prevention. However, poor solubility in both oil and water limited the application of free phytosterols in the food industry. Chemical or enzymatic modifications were effective to improve the physicochemical properties as well as the bioavailability and cholesterollowering activity of phytosterols. Higher oil solubility and lower melting point of phytosterols have been achieved by esterification and transesterification with fatty acids and triacylglycerols so as to enhance the bioavailability, reduce formation of precipitates, and improve the sensory quality of products.While the researches on the improvement on its water solubility is a hot topic. Hydrophilic phytosterol derivatives have promising applications in the food industry because most of foods belong to aqueous matrix. Hydrophilic modification is useful and meaningful for phytosterols in both industrial and commercial applications. This review mainly highlights the hydrophilic phytosterol derivatives in the following aspects:(i) hydrophilic modifications of phytosterols by coupling with various polar components;(ii) cholesterol-lowering activity and possible molecular mechanisms of hydrophilic phytosterol derivatives on reducing serum cholesterol level;and(iii) safety evaluation of hydrophilic phytosterol derivatives in cell-culture studies, animal models and clinical trials.展开更多
Invasion of drilling fluid into natural gas hydrate deposits during drilling might damage the reservoir,induce hydrate dissociation and then cause wellbore instability and distortion of the data from well logging. Add...Invasion of drilling fluid into natural gas hydrate deposits during drilling might damage the reservoir,induce hydrate dissociation and then cause wellbore instability and distortion of the data from well logging. Adding nanoparticles into drilling fluid is an effective method in reducing the invasion of drilling fluid and enhancing borehole stability. However, the addition of nanoparticles might also introduce hydrate formation risk in borehole because they can act as the "seeds" for hydrate nucleation. This paper presents an experimental study of the effect of hydrophilic silica nanoparticle on gas hydrate formation in a dynamic methane/liquid-water system. In the experiment, the ultrapure water with and without1.0 wt%–6.0 wt% concentrations of silica nanoparticles, grain sizes of 20 and 50 nm, were pressurized by methane gas under varied conditions of temperature and pressure. The induction time, the gas consumption, and the average rate of gas consumption in the system were measured and compared to those in ultrapure water. The results show that a concentration of 4.0 wt% hydrophilic SiO_2 particles with a grain size of 50 nm has a relatively strong inhibition effect on hydrate formation when the initial experimental condition is 5.0 °C and 5.0 MPa. Compared to ultrapure water, the hydrophilic nano-SiO_2 fluid increases the induction time for hydrate formation by 194% and decreases the amount and average rate of hydrate formation by 10% and 17%, respectively. This inhibition effect may be attributed to the hydrophilicity,amount and aggregation of silica nanoparticle according to the results of water activity and zeta potential measurements. Our work also elucidates hydrophilic, instead of hydrophobic, nanoparticles can be added to the drilling fluid to maintain wellbore stability and to protect the hydrate reservoir from drilling mud damage, because they exhibit certain degree of hydrate inhibition which can reduce the risk of hydrate reformation and aggregation during gas hydrate or deep water drilling if their concentration can be controlled properly.展开更多
·AIM: To compare posterior capsule opacification(PCO)degree and visual functions after phacoemulsification in eyes implanted with 360-degree square edge hydrophilic acrylic intraocular lens(IOL)(570C C-flex, Rayn...·AIM: To compare posterior capsule opacification(PCO)degree and visual functions after phacoemulsification in eyes implanted with 360-degree square edge hydrophilic acrylic intraocular lens(IOL)(570C C-flex, Rayner) and sharp edge hydrophobic acrylic IOL(Sensar AR40 e,AMO) in diabetic patients.· METHODS: Sixty diabetic patients underwent uneventful phacoemulsification and randomly implanted one of the two IOLs. The PCO value was measured by retroillumination photographs and Evaluation of Posterior Capsule Opacification(EPCO) 2000 image-analysis software at 1, 6, 12, and 24 mo after surgery. Visual acuity, and contrast sensitivity in photopic and mesopic conditions were also examined at each follow up time point. The incidence of eye that required Nd:YAG laser posterior capsulotomy were also compared.·RESULTS: There was not any statistically significant difference in PCO scores between Rayner C-flex 570 C group and Sensar AR40 e group at each follow up time point. Visual acuity, Nd:YAG capsulotomy incidence and contrast sensitivity also had no significant difference during the 24 mo follow-up.·CONCLUSION: For diabetic patients, Rayner 570 C Cflex and Sensar AR40 e IOLs are same effective for prevent PCO. The 360-degree square edge design maybe is a good alternative technique to improve PCO prevention.展开更多
To solve the so called “white rust” and ’water bridge" problems of the aluminum fins for heat exchanger of automobile air conditioner, aimed at nationalizing the art of hydrophilic coating technology, the choi...To solve the so called “white rust” and ’water bridge" problems of the aluminum fins for heat exchanger of automobile air conditioner, aimed at nationalizing the art of hydrophilic coating technology, the choice of coating forming and curing materials was investigated. By measuring the water contact angle, SEM surface scanning and ingredients analysis of the coating, optimal parameters and composition are acquired. The coating forming mechanisms of the composition was also expatiated. The coating obtained has good hydrophilic and other properties.展开更多
Graphitic carbon nitride(g-C_(3)N_(4))has attracted great interest in photocatalysis and photoelectrocatalysis.However,their poor hydrophilicity poses a great challenge for their applications in aqueous environment.He...Graphitic carbon nitride(g-C_(3)N_(4))has attracted great interest in photocatalysis and photoelectrocatalysis.However,their poor hydrophilicity poses a great challenge for their applications in aqueous environment.Here,we demonstrate synthesis of a hydrophilic bi-functional hierarchical architecture by the assembly of B-doped g-C_(3)N_(4)nanoplatelets.Such hierarchical B-doped g-C_(3)N_(4)material enables full utilization of their highly enhanced visible light absorption and photogenerated carrier separation in aqueous medium,leading to an excellent photocatalytic H_(2)O_(2)production rate of 4240.3μM g^(-1)h^(-1),2.84,2.64 and 2.13 times higher than that of the bulk g-C_(3)N_(4),g-C_(3)N_(4)nanoplatelets and bulk B doped g-C_(3)N_(4),respectively.Photoanodes based on these hierarchical architectures can generate an unprecedented photocurrent density of 1.72 m A cm^(-2)at 1.23 V under AM 1.5 G illumination for photoelectrochemical water splitting.This work makes a fundamental improvement towards large-scale exploitation of highly active,hydrophilic and stable metal-free g-C_(3)N_(4)photocatalysts for various practical applications.展开更多
TiO2-SiO2 thin films have been prepared on slide glass substrates by sol-gel method, and the effect of SiO2 additive on photo-generated hydrophilicity of TiO2 thin film was investigated by measuring the contact angle ...TiO2-SiO2 thin films have been prepared on slide glass substrates by sol-gel method, and the effect of SiO2 additive on photo-generated hydrophilicity of TiO2 thin film was investigated by measuring the contact angle of water, the microstructure, the transmittance, the photocatalytic activity and the specific surface area . The results showed that 10mol% of SiO2 additive was the most effective for decreasing contact angle of water. The SiO2 additive of less than 30mol% has a suppressive effect on the crystal growth of anatase in calcinations, resulting in a large surface area. Consequently, the super-hydrophilicity was improved.展开更多
Dear Sir,Iam Yong-Sun Ahn,from the Department of Ophthalmology of St.Vincent Hospital of Suwon,Kyungki-do,South Korea.Cataracts are a common problem in eyes with a glaucoma drainage device(GDD),because tube shunt surg...Dear Sir,Iam Yong-Sun Ahn,from the Department of Ophthalmology of St.Vincent Hospital of Suwon,Kyungki-do,South Korea.Cataracts are a common problem in eyes with a glaucoma drainage device(GDD),because tube shunt surgery increases the incidence and progression of cataracts[1].An Ahmed valve,the most commonly inserted GDD,is composed of a silicone tube connected to a flat plate sewn to the sclera,and aqueous humor flows from展开更多
Objective: To determine hydrophilic–lipophilic balance(HLB) value, stability of formulate emulsion and properties of sacha inchi oil.Methods: The physiochemical characteristics of sacha inchi oil were first investiga...Objective: To determine hydrophilic–lipophilic balance(HLB) value, stability of formulate emulsion and properties of sacha inchi oil.Methods: The physiochemical characteristics of sacha inchi oil were first investigated.Free radical scavenging property was studied by DPPH assay. HLB value of sacha inchi oil was experimentally determined by preparing the emulsion using emulsifiers at different HLB value. Sacha inchi oil emulsion was prepared using the obtained HLB and its stability was conducted by centrifugation, temperature cycling, and accelerated stability test. The efficiency of the prepared emulsion was clinically investigated by 15 volunteers. The primary skin irritation was performed using closed patch test. Subjective sensory assessment was evaluated by using 5-point hedonic scale method.Results: Peroxide value of sacha inchi oil was 18.40 meq O2/kg oil and acid value was1.86 KOH/g oil. The major fatty acids are omega-3(44%), omega-6(35%) and omega-9(9%). The vitamin E content was 226 mg/100 g oil. Moreover, sacha inchi oil(167 ppm)and its emulsion showed 85% and 89% DPPH inhibition, respectively. The experimental HLB value of sacha inchi oil was 8.5. The sacha inchi oil emulsion exhibited good stability after stability test. The emulsion was classified as non-irritant after tested by primary skin irritation method. The skin hydration value significantly increased from38.59 to 45.21(P < 0.05) after applying sacha inchi oil emulsion for 1 month and the overall product satisfaction of volunteers after use was with score of 4.2.Conclusions: This work provides information on HLB value and emulsion properties of sacha inchi oil which is useful for cosmetic and pharmaceutical application.展开更多
Hydrophilic surface modification of poly(phthalazinone ether sulfone ketone)(PPESK) porous membranes was achieved via surface-initiated atom transfer radical polymerization(ATRP) in aqueous medium.Prior to ATRP.chloro...Hydrophilic surface modification of poly(phthalazinone ether sulfone ketone)(PPESK) porous membranes was achieved via surface-initiated atom transfer radical polymerization(ATRP) in aqueous medium.Prior to ATRP.chloromethyl groups were introduced onto PPESK main chains by chloromethylation.Chloromethvlated PPESK(CMPPESK) was fabricated into porous membrane through phase inversion technique.Hydrophilic poly(poly(ethylene glycol) methyl ether methacrylate)(P(PEGMA)) brushes were grafted from CMPPESK membra...展开更多
AIM: To conduct a Meta-analysis pooling randomized controlled trials(RCTs) to compare hydrophobic with hydrophilic acrylic intraocular lenses in terms of posterior capsule opacification(PCO) development.METHODS: Elect...AIM: To conduct a Meta-analysis pooling randomized controlled trials(RCTs) to compare hydrophobic with hydrophilic acrylic intraocular lenses in terms of posterior capsule opacification(PCO) development.METHODS: Electronic databases including PubMed,Embase, and the Cochrane Library were queried from their starting till January 2020. RCTs investigating the impact of hydrophobic versus hydrophilic acrylic intraocular lenses on PCO were considered eligible in this study. The pooled effect estimates were calculated using the random-effects model.RESULTS: Thirteen RCTs comprising of 939 patients(1263 eyes) were covered in this study. Patients with hydrophobic acrylic intraocular lenses had a lower PCO score than those with a hydrophilic acrylic intraocular lenses [standard mean difference:-1.80;95% confidence interval(CI):-2.62 to-0.98;P<0.001]. Moreover, the frequency of neodymium-doped yttrium aluminum garnet(Nd:YAG)capsulotomy in patients with hydrophobic acrylic intraocular lenses was significantly lower than patients with hydrophilic acrylic intraocular lenses(relative risk: 0.38;95%CI: 0.20-0.71;P=0.003).CONCLUSION: These findings suggest that hydrophobic acrylic intraocular lenses are superior to hydrophilic acrylic intraocular lenses in patients after cataract surgery due to lower PCO score and reduced Nd:YAG capsulotomy. While similar studies are conducted by other researchers, the present study conducted subgroup analyses that show superior results with hydrophobic lenses in trials conducted in western countries.展开更多
Metal-polyvinyl alcohol(PVA) composite ultrafiltration membranes were prepared by coating a certain concentration of PVA solution on metallic fiber sintered membranes. The effects of preparation conditions, such as th...Metal-polyvinyl alcohol(PVA) composite ultrafiltration membranes were prepared by coating a certain concentration of PVA solution on metallic fiber sintered membranes. The effects of preparation conditions, such as the coating solution concentration, sequence and times of coating, and heat-treatment on the properties of the composite membranes were studied. The results show that the hole diameter of the composite membrane decreases with the increase of the concentration of PVA, the hole diameter of composite membrane is different when the sequence of coating is different. When the higher concentration of PVA solution is used to coat the metallic membrane for the first time and the other smaller one for the second time, the hole diameter of the composite membrane is relatively small, compared with that of the composite membrane made by the smaller concentration of PVA solution for the first time and the other higher one for the second time. The holes of the composite membrane contract and the stability of the membrane is improved by heat treatment. When metal-PVA composite hydrophilic membranes are used to treat the oil/water emulsion with the concentration of 1 000 mg·L -1 , the retention is from 80% to 90%, and the permeate flux is from 15 L·m -2 ·h -1 to 40 L·m -2 ·h -1 at pressure of 0.2 to 0.3 MPa.展开更多
A hydrophilic composite polybutylene terephthalate(PBT)/polyvinyl alcohol(PVA)membrane with great potential applications in biological filtration has been investigated in this research.The composite membranes were fab...A hydrophilic composite polybutylene terephthalate(PBT)/polyvinyl alcohol(PVA)membrane with great potential applications in biological filtration has been investigated in this research.The composite membranes were fabricated by electrospinning with PBT meltblown nonwovens as the receiving substrate.These membranes have higher strength than the conventional single layer electrospinning membrane,smaller pore diameter than the common meltblown PBT nonwovens,good hydrophilicity,and high water flux.The flux of the composite membrane was 5.97×10^(3) L/(m^(2)·h)for 5%(mass fraction)glucose solution,which was higher than that of the commercial blood filtration membranes.The optimal process for preparing PBT/PVA composite membranes was obtained by orthogonal experiments.In general,the preparation process is simple and easy to control.展开更多
The amino poly-siloxane was modified with self-made polyether silicones by the crafts of emulsion polymerization. We studied the emulsifier, the dosage of emulsifier initiator, polyether/silane coupling agent, pH valu...The amino poly-siloxane was modified with self-made polyether silicones by the crafts of emulsion polymerization. We studied the emulsifier, the dosage of emulsifier initiator, polyether/silane coupling agent, pH value. There are some results of the research indicated in the following. First, there are many factors for the hydrophilic amino-silicone softener both on the polymerization process and the performance, such as the proportion and amount of emulsifier, initiator dosage, the mass ratio of the polyether and hydrogen silicone oil, the choice of silicone coupling agent, and the ratio and dosage of polyether silicones silane coupling agent. Second, the amount of hydrogen of the hydrogen silicones and the choice of catalyst are the key points on the synthesis of polyether silicones. The amount of hydrogen should be low and the catalyst must be economical and efficient and its introduction should be small and times, other more the holding time is not too long. The next one is that, in the process of hydrolysis of silane coupling agent, we need some acid to adjust pH value, or they will be broken down. The most important one but not the last is that the epoxy group can improve the products low-temperature supple and the persistence of the finishing fabric, furthermore it can reduce yellowing and has a good stability of the inorganic salt, however, it will be destroyed if the reaction temperature for epoxy is too high. What’s more, it is very economical and environmental that the process of emulsion is simple and with less emulsifier.展开更多
Zirconium and its alloys are more suitable materials for implant surgery to be performed in a magnetic resonance imaging scanner compared with other implant materials. Although they have high anticorrosion properties ...Zirconium and its alloys are more suitable materials for implant surgery to be performed in a magnetic resonance imaging scanner compared with other implant materials. Although they have high anticorrosion properties in the body, as do titanium and its alloys, they have little use as implants in contact with bone because of their low osteoconductivity (bone-implant contact ratio). To improve the osteoconductivity of zirconium, niobium, and Zr-9Nb-3Sn alloy, we applied a single- step hydrothermal surface treatment using distilled water at a temperature of 180°C for 3 h. The hydrothermally treated samples were stored in a ×5 phosphate-buffered saline (PBS(-)) solution to keep or to improve the water contact angle (WCA), which has a strongly positive effect on osteoconductivity. The specimen surfaces were characterized using scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, surface roughness, and contact angle measurement using a 2 μL droplet of distilled water. The relationship between WCA and osteoconductivity for various surface modifications was examined using in vivo tests. The results showed that a superhydrophilic surface with a WCA ≤ 10° and a high osteoconductivity of up to 40% in cortical bone, about four times higher than the as-polished Zr-9Nb-3Sn and its pure alloy elements, was provided by the combination of hydrothermal surface treatment and storage in ×5 PBS(-).展开更多
A substituted glycolide, 3-benzyloxymethyl-1,4-dioxane-2,5-dione, was synthesized. It is a suitable precursor for the preparation of a new hydrophilic biodegradable poly(a-hydroxy acid). The polymerizations were carri...A substituted glycolide, 3-benzyloxymethyl-1,4-dioxane-2,5-dione, was synthesized. It is a suitable precursor for the preparation of a new hydrophilic biodegradable poly(a-hydroxy acid). The polymerizations were carried out in bulk in the presence of Sn(Oct)2 at 120-140℃. The resulting polymers were subjected to hydrogenolysis with a Pd/C catalyst in a mixed solvent to remove the protecting benzyl groups. A novel poly(a-hydroxy acid) with pendant hydroxy groups was obtained. The hydrophilicity of the resulting polymer was evaluated preliminarily.展开更多
In this paper,morphological structure,thermodynamic compatibility and relationship be-tween porosities and blend ratios of the wet coagulated PU/PVA sheets were studied by meansof observation of scanning electronic mi...In this paper,morphological structure,thermodynamic compatibility and relationship be-tween porosities and blend ratios of the wet coagulated PU/PVA sheets were studied by meansof observation of scanning electronic micrographies,tests of dynamic mechanical properties,moisture regain and vapor permeability.Furthermore,the formation of microvoids at interfacesof separated phases was discussed and a microvoid formation mechanism at phase interfaces ofhydrophobic-hydrophilic blends was suggested and compared with that ofhydrophobic-hydrophobic blends.展开更多
Constipation is a common functional gastrointestinal disorder which has caused much discomfort affecting the quality of life. The prevalence of constipation in the general population is approximately 20%(1)Various kin...Constipation is a common functional gastrointestinal disorder which has caused much discomfort affecting the quality of life. The prevalence of constipation in the general population is approximately 20%(1)Various kinds of laxatives were introduced such as bulking agent, stool softener, stimulant, and osmotic agent (2)Fixed dose combination with bisacodyl as a stimulant and docusate sodium as a stool softener, Ducolax STM, was developed as enteric coated tablets targeting colon.展开更多
Zwitterionic sulfobetaine-based monolithic stationary phases have attracted increasing attention for their use in hydrophilic interaction chromatography.In this study,a novel hydrophilic polymeric monolith was fabrica...Zwitterionic sulfobetaine-based monolithic stationary phases have attracted increasing attention for their use in hydrophilic interaction chromatography.In this study,a novel hydrophilic polymeric monolith was fabricated through photo-initiated copolymerization of 3-(3-vinyl-1-imidazolio)-1-propanesulfonate(SBVI)with pentaerythritol triacrylate using methanol and tetrahydrofuran as the porogenic system.Notably,the duration for the preparation of this novel monolith was as little as 5 min,which was significantly shorter than that required for previously reported sulfobetaine-based monoliths prepared via conventional thermally initiated copolymerization.Moreover,these monoliths showed good morphology,permeability,porosity(62.4%),mechanical strength(over 15 MPa),column efficiency(51,230 plates/m),and reproducibility(relative standard deviations for all analytes were lower than 4.6%).Mechanistic studies indicated that strong hydrophilic and negative electrostatic interactions might be responsible for the retention of polar analytes on the zwitterionic SBVI-based monolith.In particular,the resulting monolith exhibited good anti-protein adhesion ability and low nonspecific protein adsorption.These excellent features seem to favor its application in bioanalysis.Therefore,the novel zwitterionic sulfobetaine-based monolith was successfully employed for the highly selective separation of small bioactive compounds and the efficient enrichment of N-glycopeptides from complex samples.In this study,we prepared a novel zwitterionic sulfobetaine-based monolith with good performance and developed a simpler and faster method for preparation of zwitterionic monoliths.展开更多
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.2022R1F1A1070168,2020R1C1C1004322)the Korea Institute of Industrial Technology as Development of core technology for smart wellness care based on cleaner production process technology(KITECH-PEH23030)+1 种基金supported by the Renewable Surplus Sector Coupling Technology Program of the Korea Institute of Energy Technology Evaluation and Planning(KETEP)granted financial resource from the Ministry of Trade,Industry&Energy,Republic of Korea(No.20226210100050)the National Research Council of Science&Technology(NST)grant by the Korea government(MSIT)(No.CPS21141-100)。
文摘Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utilization of active materials with increasing the thickness of electrodes for aqueous batteries,resulting in battery performance deterioration with a reduced capacity.Here,we demonstrate that controlling the hydrophilicity of the thicker electrodes is critical to enhancing the overall energy density of batteries.Hydrophilic binders are synthesized via a simple sulfonation process of conventional polyvinylidene fluoride binders,considering physicochemical properties such as mechanical properties and adhesion.The introduction of abundant sulfonate groups of binders(i)allows fast and sufficient electrolyte wetting,and(ii)improves ionic conduction in thick electrodes,enabling a significant increase in reversible capacities under various current densities.Further,the sulfonated binder effectively inhibits the dissolution of cathode materials in reactive aqueous electrolytes.Overall,our findings significantly enhance the energy density and contribute to the development of practical zinc-ion batteries.
基金supported by the National Natural Science Foundation of China(No.31972110)。
文摘Phytosterols have received extensive attention owing to their excellent cholesterol-lowering activity and the role in cardiovascular diseases prevention. However, poor solubility in both oil and water limited the application of free phytosterols in the food industry. Chemical or enzymatic modifications were effective to improve the physicochemical properties as well as the bioavailability and cholesterollowering activity of phytosterols. Higher oil solubility and lower melting point of phytosterols have been achieved by esterification and transesterification with fatty acids and triacylglycerols so as to enhance the bioavailability, reduce formation of precipitates, and improve the sensory quality of products.While the researches on the improvement on its water solubility is a hot topic. Hydrophilic phytosterol derivatives have promising applications in the food industry because most of foods belong to aqueous matrix. Hydrophilic modification is useful and meaningful for phytosterols in both industrial and commercial applications. This review mainly highlights the hydrophilic phytosterol derivatives in the following aspects:(i) hydrophilic modifications of phytosterols by coupling with various polar components;(ii) cholesterol-lowering activity and possible molecular mechanisms of hydrophilic phytosterol derivatives on reducing serum cholesterol level;and(iii) safety evaluation of hydrophilic phytosterol derivatives in cell-culture studies, animal models and clinical trials.
基金supported by National Youth Top-notch Talent Support Programthe National Natural Science Foundationof China(41672367,51704266)+2 种基金China Geological Survey Project(DD20160216)Qingdao National Laboratory for Marine Science and Technology Open Fund(QNLM2016ORP0203)Experimental Apparatus Improvement Program of CUG(SJ-201613)
文摘Invasion of drilling fluid into natural gas hydrate deposits during drilling might damage the reservoir,induce hydrate dissociation and then cause wellbore instability and distortion of the data from well logging. Adding nanoparticles into drilling fluid is an effective method in reducing the invasion of drilling fluid and enhancing borehole stability. However, the addition of nanoparticles might also introduce hydrate formation risk in borehole because they can act as the "seeds" for hydrate nucleation. This paper presents an experimental study of the effect of hydrophilic silica nanoparticle on gas hydrate formation in a dynamic methane/liquid-water system. In the experiment, the ultrapure water with and without1.0 wt%–6.0 wt% concentrations of silica nanoparticles, grain sizes of 20 and 50 nm, were pressurized by methane gas under varied conditions of temperature and pressure. The induction time, the gas consumption, and the average rate of gas consumption in the system were measured and compared to those in ultrapure water. The results show that a concentration of 4.0 wt% hydrophilic SiO_2 particles with a grain size of 50 nm has a relatively strong inhibition effect on hydrate formation when the initial experimental condition is 5.0 °C and 5.0 MPa. Compared to ultrapure water, the hydrophilic nano-SiO_2 fluid increases the induction time for hydrate formation by 194% and decreases the amount and average rate of hydrate formation by 10% and 17%, respectively. This inhibition effect may be attributed to the hydrophilicity,amount and aggregation of silica nanoparticle according to the results of water activity and zeta potential measurements. Our work also elucidates hydrophilic, instead of hydrophobic, nanoparticles can be added to the drilling fluid to maintain wellbore stability and to protect the hydrate reservoir from drilling mud damage, because they exhibit certain degree of hydrate inhibition which can reduce the risk of hydrate reformation and aggregation during gas hydrate or deep water drilling if their concentration can be controlled properly.
基金Supported by the National Natural Science Foundation of China(No.30901644)the Fundamental Research Funds for the Central Universities of China
文摘·AIM: To compare posterior capsule opacification(PCO)degree and visual functions after phacoemulsification in eyes implanted with 360-degree square edge hydrophilic acrylic intraocular lens(IOL)(570C C-flex, Rayner) and sharp edge hydrophobic acrylic IOL(Sensar AR40 e,AMO) in diabetic patients.· METHODS: Sixty diabetic patients underwent uneventful phacoemulsification and randomly implanted one of the two IOLs. The PCO value was measured by retroillumination photographs and Evaluation of Posterior Capsule Opacification(EPCO) 2000 image-analysis software at 1, 6, 12, and 24 mo after surgery. Visual acuity, and contrast sensitivity in photopic and mesopic conditions were also examined at each follow up time point. The incidence of eye that required Nd:YAG laser posterior capsulotomy were also compared.·RESULTS: There was not any statistically significant difference in PCO scores between Rayner C-flex 570 C group and Sensar AR40 e group at each follow up time point. Visual acuity, Nd:YAG capsulotomy incidence and contrast sensitivity also had no significant difference during the 24 mo follow-up.·CONCLUSION: For diabetic patients, Rayner 570 C Cflex and Sensar AR40 e IOLs are same effective for prevent PCO. The 360-degree square edge design maybe is a good alternative technique to improve PCO prevention.
文摘To solve the so called “white rust” and ’water bridge" problems of the aluminum fins for heat exchanger of automobile air conditioner, aimed at nationalizing the art of hydrophilic coating technology, the choice of coating forming and curing materials was investigated. By measuring the water contact angle, SEM surface scanning and ingredients analysis of the coating, optimal parameters and composition are acquired. The coating forming mechanisms of the composition was also expatiated. The coating obtained has good hydrophilic and other properties.
基金financially supported by the National Natural Science Foundation of China(U1663225)the Changjiang Scholar Program of Chinese Ministry of Education(IRT15R52)the program of Introducing Talents of Discipline to Universities-Plan 111(B20002)of Ministry of Science and Technology and the Ministry of Education of China and the project “Depollut Air”of Interreg V France-WallonieVlaanderen。
文摘Graphitic carbon nitride(g-C_(3)N_(4))has attracted great interest in photocatalysis and photoelectrocatalysis.However,their poor hydrophilicity poses a great challenge for their applications in aqueous environment.Here,we demonstrate synthesis of a hydrophilic bi-functional hierarchical architecture by the assembly of B-doped g-C_(3)N_(4)nanoplatelets.Such hierarchical B-doped g-C_(3)N_(4)material enables full utilization of their highly enhanced visible light absorption and photogenerated carrier separation in aqueous medium,leading to an excellent photocatalytic H_(2)O_(2)production rate of 4240.3μM g^(-1)h^(-1),2.84,2.64 and 2.13 times higher than that of the bulk g-C_(3)N_(4),g-C_(3)N_(4)nanoplatelets and bulk B doped g-C_(3)N_(4),respectively.Photoanodes based on these hierarchical architectures can generate an unprecedented photocurrent density of 1.72 m A cm^(-2)at 1.23 V under AM 1.5 G illumination for photoelectrochemical water splitting.This work makes a fundamental improvement towards large-scale exploitation of highly active,hydrophilic and stable metal-free g-C_(3)N_(4)photocatalysts for various practical applications.
基金Funded by Key Scientific and Technological Items of the Ministry of Education (No.99087) .
文摘TiO2-SiO2 thin films have been prepared on slide glass substrates by sol-gel method, and the effect of SiO2 additive on photo-generated hydrophilicity of TiO2 thin film was investigated by measuring the contact angle of water, the microstructure, the transmittance, the photocatalytic activity and the specific surface area . The results showed that 10mol% of SiO2 additive was the most effective for decreasing contact angle of water. The SiO2 additive of less than 30mol% has a suppressive effect on the crystal growth of anatase in calcinations, resulting in a large surface area. Consequently, the super-hydrophilicity was improved.
文摘Dear Sir,Iam Yong-Sun Ahn,from the Department of Ophthalmology of St.Vincent Hospital of Suwon,Kyungki-do,South Korea.Cataracts are a common problem in eyes with a glaucoma drainage device(GDD),because tube shunt surgery increases the incidence and progression of cataracts[1].An Ahmed valve,the most commonly inserted GDD,is composed of a silicone tube connected to a flat plate sewn to the sclera,and aqueous humor flows from
文摘Objective: To determine hydrophilic–lipophilic balance(HLB) value, stability of formulate emulsion and properties of sacha inchi oil.Methods: The physiochemical characteristics of sacha inchi oil were first investigated.Free radical scavenging property was studied by DPPH assay. HLB value of sacha inchi oil was experimentally determined by preparing the emulsion using emulsifiers at different HLB value. Sacha inchi oil emulsion was prepared using the obtained HLB and its stability was conducted by centrifugation, temperature cycling, and accelerated stability test. The efficiency of the prepared emulsion was clinically investigated by 15 volunteers. The primary skin irritation was performed using closed patch test. Subjective sensory assessment was evaluated by using 5-point hedonic scale method.Results: Peroxide value of sacha inchi oil was 18.40 meq O2/kg oil and acid value was1.86 KOH/g oil. The major fatty acids are omega-3(44%), omega-6(35%) and omega-9(9%). The vitamin E content was 226 mg/100 g oil. Moreover, sacha inchi oil(167 ppm)and its emulsion showed 85% and 89% DPPH inhibition, respectively. The experimental HLB value of sacha inchi oil was 8.5. The sacha inchi oil emulsion exhibited good stability after stability test. The emulsion was classified as non-irritant after tested by primary skin irritation method. The skin hydration value significantly increased from38.59 to 45.21(P < 0.05) after applying sacha inchi oil emulsion for 1 month and the overall product satisfaction of volunteers after use was with score of 4.2.Conclusions: This work provides information on HLB value and emulsion properties of sacha inchi oil which is useful for cosmetic and pharmaceutical application.
基金supported by the National Basic Research Program of China(No2009CB623402)China Postdoctoral Science Foundation(No20080430220)
文摘Hydrophilic surface modification of poly(phthalazinone ether sulfone ketone)(PPESK) porous membranes was achieved via surface-initiated atom transfer radical polymerization(ATRP) in aqueous medium.Prior to ATRP.chloromethyl groups were introduced onto PPESK main chains by chloromethylation.Chloromethvlated PPESK(CMPPESK) was fabricated into porous membrane through phase inversion technique.Hydrophilic poly(poly(ethylene glycol) methyl ether methacrylate)(P(PEGMA)) brushes were grafted from CMPPESK membra...
文摘AIM: To conduct a Meta-analysis pooling randomized controlled trials(RCTs) to compare hydrophobic with hydrophilic acrylic intraocular lenses in terms of posterior capsule opacification(PCO) development.METHODS: Electronic databases including PubMed,Embase, and the Cochrane Library were queried from their starting till January 2020. RCTs investigating the impact of hydrophobic versus hydrophilic acrylic intraocular lenses on PCO were considered eligible in this study. The pooled effect estimates were calculated using the random-effects model.RESULTS: Thirteen RCTs comprising of 939 patients(1263 eyes) were covered in this study. Patients with hydrophobic acrylic intraocular lenses had a lower PCO score than those with a hydrophilic acrylic intraocular lenses [standard mean difference:-1.80;95% confidence interval(CI):-2.62 to-0.98;P<0.001]. Moreover, the frequency of neodymium-doped yttrium aluminum garnet(Nd:YAG)capsulotomy in patients with hydrophobic acrylic intraocular lenses was significantly lower than patients with hydrophilic acrylic intraocular lenses(relative risk: 0.38;95%CI: 0.20-0.71;P=0.003).CONCLUSION: These findings suggest that hydrophobic acrylic intraocular lenses are superior to hydrophilic acrylic intraocular lenses in patients after cataract surgery due to lower PCO score and reduced Nd:YAG capsulotomy. While similar studies are conducted by other researchers, the present study conducted subgroup analyses that show superior results with hydrophobic lenses in trials conducted in western countries.
文摘Metal-polyvinyl alcohol(PVA) composite ultrafiltration membranes were prepared by coating a certain concentration of PVA solution on metallic fiber sintered membranes. The effects of preparation conditions, such as the coating solution concentration, sequence and times of coating, and heat-treatment on the properties of the composite membranes were studied. The results show that the hole diameter of the composite membrane decreases with the increase of the concentration of PVA, the hole diameter of composite membrane is different when the sequence of coating is different. When the higher concentration of PVA solution is used to coat the metallic membrane for the first time and the other smaller one for the second time, the hole diameter of the composite membrane is relatively small, compared with that of the composite membrane made by the smaller concentration of PVA solution for the first time and the other higher one for the second time. The holes of the composite membrane contract and the stability of the membrane is improved by heat treatment. When metal-PVA composite hydrophilic membranes are used to treat the oil/water emulsion with the concentration of 1 000 mg·L -1 , the retention is from 80% to 90%, and the permeate flux is from 15 L·m -2 ·h -1 to 40 L·m -2 ·h -1 at pressure of 0.2 to 0.3 MPa.
文摘A hydrophilic composite polybutylene terephthalate(PBT)/polyvinyl alcohol(PVA)membrane with great potential applications in biological filtration has been investigated in this research.The composite membranes were fabricated by electrospinning with PBT meltblown nonwovens as the receiving substrate.These membranes have higher strength than the conventional single layer electrospinning membrane,smaller pore diameter than the common meltblown PBT nonwovens,good hydrophilicity,and high water flux.The flux of the composite membrane was 5.97×10^(3) L/(m^(2)·h)for 5%(mass fraction)glucose solution,which was higher than that of the commercial blood filtration membranes.The optimal process for preparing PBT/PVA composite membranes was obtained by orthogonal experiments.In general,the preparation process is simple and easy to control.
文摘The amino poly-siloxane was modified with self-made polyether silicones by the crafts of emulsion polymerization. We studied the emulsifier, the dosage of emulsifier initiator, polyether/silane coupling agent, pH value. There are some results of the research indicated in the following. First, there are many factors for the hydrophilic amino-silicone softener both on the polymerization process and the performance, such as the proportion and amount of emulsifier, initiator dosage, the mass ratio of the polyether and hydrogen silicone oil, the choice of silicone coupling agent, and the ratio and dosage of polyether silicones silane coupling agent. Second, the amount of hydrogen of the hydrogen silicones and the choice of catalyst are the key points on the synthesis of polyether silicones. The amount of hydrogen should be low and the catalyst must be economical and efficient and its introduction should be small and times, other more the holding time is not too long. The next one is that, in the process of hydrolysis of silane coupling agent, we need some acid to adjust pH value, or they will be broken down. The most important one but not the last is that the epoxy group can improve the products low-temperature supple and the persistence of the finishing fabric, furthermore it can reduce yellowing and has a good stability of the inorganic salt, however, it will be destroyed if the reaction temperature for epoxy is too high. What’s more, it is very economical and environmental that the process of emulsion is simple and with less emulsifier.
文摘Zirconium and its alloys are more suitable materials for implant surgery to be performed in a magnetic resonance imaging scanner compared with other implant materials. Although they have high anticorrosion properties in the body, as do titanium and its alloys, they have little use as implants in contact with bone because of their low osteoconductivity (bone-implant contact ratio). To improve the osteoconductivity of zirconium, niobium, and Zr-9Nb-3Sn alloy, we applied a single- step hydrothermal surface treatment using distilled water at a temperature of 180°C for 3 h. The hydrothermally treated samples were stored in a ×5 phosphate-buffered saline (PBS(-)) solution to keep or to improve the water contact angle (WCA), which has a strongly positive effect on osteoconductivity. The specimen surfaces were characterized using scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, surface roughness, and contact angle measurement using a 2 μL droplet of distilled water. The relationship between WCA and osteoconductivity for various surface modifications was examined using in vivo tests. The results showed that a superhydrophilic surface with a WCA ≤ 10° and a high osteoconductivity of up to 40% in cortical bone, about four times higher than the as-polished Zr-9Nb-3Sn and its pure alloy elements, was provided by the combination of hydrothermal surface treatment and storage in ×5 PBS(-).
基金This work was supported by the Major State Basic Research Program of China (No. G1999064704).
文摘A substituted glycolide, 3-benzyloxymethyl-1,4-dioxane-2,5-dione, was synthesized. It is a suitable precursor for the preparation of a new hydrophilic biodegradable poly(a-hydroxy acid). The polymerizations were carried out in bulk in the presence of Sn(Oct)2 at 120-140℃. The resulting polymers were subjected to hydrogenolysis with a Pd/C catalyst in a mixed solvent to remove the protecting benzyl groups. A novel poly(a-hydroxy acid) with pendant hydroxy groups was obtained. The hydrophilicity of the resulting polymer was evaluated preliminarily.
文摘In this paper,morphological structure,thermodynamic compatibility and relationship be-tween porosities and blend ratios of the wet coagulated PU/PVA sheets were studied by meansof observation of scanning electronic micrographies,tests of dynamic mechanical properties,moisture regain and vapor permeability.Furthermore,the formation of microvoids at interfacesof separated phases was discussed and a microvoid formation mechanism at phase interfaces ofhydrophobic-hydrophilic blends was suggested and compared with that ofhydrophobic-hydrophobic blends.
文摘Constipation is a common functional gastrointestinal disorder which has caused much discomfort affecting the quality of life. The prevalence of constipation in the general population is approximately 20%(1)Various kinds of laxatives were introduced such as bulking agent, stool softener, stimulant, and osmotic agent (2)Fixed dose combination with bisacodyl as a stimulant and docusate sodium as a stool softener, Ducolax STM, was developed as enteric coated tablets targeting colon.
基金supported by the National Natural Science Foundation of China(Grant Nos.:82173773 and 82073806)the Natural Science Foundation of Guangdong Province,China(Grant Nos.:2020A1515010569 and 2021A0505030039)Science and Technology Program of Guangzhou,China(Grant No.:202102020729).
文摘Zwitterionic sulfobetaine-based monolithic stationary phases have attracted increasing attention for their use in hydrophilic interaction chromatography.In this study,a novel hydrophilic polymeric monolith was fabricated through photo-initiated copolymerization of 3-(3-vinyl-1-imidazolio)-1-propanesulfonate(SBVI)with pentaerythritol triacrylate using methanol and tetrahydrofuran as the porogenic system.Notably,the duration for the preparation of this novel monolith was as little as 5 min,which was significantly shorter than that required for previously reported sulfobetaine-based monoliths prepared via conventional thermally initiated copolymerization.Moreover,these monoliths showed good morphology,permeability,porosity(62.4%),mechanical strength(over 15 MPa),column efficiency(51,230 plates/m),and reproducibility(relative standard deviations for all analytes were lower than 4.6%).Mechanistic studies indicated that strong hydrophilic and negative electrostatic interactions might be responsible for the retention of polar analytes on the zwitterionic SBVI-based monolith.In particular,the resulting monolith exhibited good anti-protein adhesion ability and low nonspecific protein adsorption.These excellent features seem to favor its application in bioanalysis.Therefore,the novel zwitterionic sulfobetaine-based monolith was successfully employed for the highly selective separation of small bioactive compounds and the efficient enrichment of N-glycopeptides from complex samples.In this study,we prepared a novel zwitterionic sulfobetaine-based monolith with good performance and developed a simpler and faster method for preparation of zwitterionic monoliths.
