The notorious growth of zinc dendrite and the water-induced corrosion of zinc metal anodes(ZMAs)restrict the practical development of aqueous zinc ion batteries(AZIBs).In this work,a zinc metallized,imide-pillared cov...The notorious growth of zinc dendrite and the water-induced corrosion of zinc metal anodes(ZMAs)restrict the practical development of aqueous zinc ion batteries(AZIBs).In this work,a zinc metallized,imide-pillared covalent organic framework(ZPC)protective film has been engineered as a stable Zn^(2+)ion-conducting interphase to modulate interfacial kinetics and suppress side reactions for ZMAs.Compared to bare Zn,ZPC@Zn exhibits a higher Zn^(2+)ionic conductivity,a larger Zn^(2+)transference number,a lower electronic conductivity,a smaller desolvation activation energy and correspondingly a significant suppression of corrosion,hydrogen evolution and Zn dendrites.Impressively,the ZPC@Zn||ZPC@Zn symmetric cell obtains a cycling lifespan over 3000 h under 5 mA cm^(-2)for 1 mA h cm^(-2).The ZPC@Zn||NH_(4)V_(4)O_(10)coin-type full battery delivers a specific capacity of 195.8 mA h g^(-1)with a retention rate of78.5%at 2 A g^(-1)after 1100 cycles,and the ZPC@Zn||NH_(4)V_(4)O_(10) pouch full cell shows a retention of70.1%in reversible capacity at 3 A g^(-1)after 1100 cycles.The present incorporation of imide-linked covalent organic frameworks in the surface modification of ZMAs will offer fresh perspectives in the search for ideal protective films for the practicality of AZIBs.展开更多
A new class of poly(ester-imide-ether) multiblock copolymers was synthesized by transes-terification and melt copolymerization of dimethyl terephthalate (DMT) and N-(4-carbomethoxyphenyl)-4-(carbomethoxy)-phthalimide ...A new class of poly(ester-imide-ether) multiblock copolymers was synthesized by transes-terification and melt copolymerization of dimethyl terephthalate (DMT) and N-(4-carbomethoxyphenyl)-4-(carbomethoxy)-phthalimide with ethylene glycol (EG) and polytetramethylene glycol (PTMG). The structure of the above copolymers was characterized by H-1-NMR and IR spectroscopy. Some properties of the coplymers were also examined. It was found that their mechanical properties and heat stability, compared with poly(ether-ester) copolymers, were obviously improved.展开更多
The cycling performance, impedance variation, and cathode surface evolution of the Li/LiCoO2 cell using Li FSI–KFSI molten salt electrolyte are reported. It is found that this battery shows poor cycling performance, ...The cycling performance, impedance variation, and cathode surface evolution of the Li/LiCoO2 cell using Li FSI–KFSI molten salt electrolyte are reported. It is found that this battery shows poor cycling performance, with capacity retention of only about 67% after 20 cycles. It is essential to understand the origin of the instability. It is noticed that the polarization voltage and the impedance of the cell both increase slowly upon cycling. The structure and the properties of the pristine and the cycled LiCoO2 cathodes are investigated by x-ray diffraction（XRD）, scanning electron microscopy（SEM）, Raman spectroscopy, x-ray photoelectron spectroscopy（XPS）, and transmission electron microscopy（TEM）. It is found that the LiCoO2 particles are corroded by this molten salt electrolyte, and the decomposition by-product covers the surface of the LiCoO2 cathode after 20 cycles. Therefore, the surface side reaction explains the instability of the molten salt electrolyte with LiCoO2.展开更多
A series of novel aromatic poly ( amide imide)s containing phthalazinone moieties were prepared from 2-(4-aminophenyl)-4-[3-methyl-4-(4-aminophenoxy)-2,3-phthalazinone-1], a novel diamine 1 with four diimide-dicarboxy...A series of novel aromatic poly ( amide imide)s containing phthalazinone moieties were prepared from 2-(4-aminophenyl)-4-[3-methyl-4-(4-aminophenoxy)-2,3-phthalazinone-1], a novel diamine 1 with four diimide-dicarboxylic acids by Yamazaki phosphorylation method with the inherent viscosity of 0.36~0.65 dL/g. These polymers had high glass transition temperatures above 300C and they lost 10% weight between 426~475C in N2. The structure of diamine 1 and the polymers was confirmed by IR, 1H NMR and MS. The obtained polymers were readily soluble in polar solvents such as NMP, m-cresol etc. and easily cast into tough, flexible films. The X-ray indicated that they are all amorphous.展开更多
Three novel poly(ether imide)s were synthesized by one-step solution polymerization from 2-(3, 4-dicarboxyl-N-phenyl)-4-(3, 4-dicarboxyl-phenoxyl-4-(2-methyl)-phenyl)-2, 3- phthal-azin-1-one dianhydride and three amin...Three novel poly(ether imide)s were synthesized by one-step solution polymerization from 2-(3, 4-dicarboxyl-N-phenyl)-4-(3, 4-dicarboxyl-phenoxyl-4-(2-methyl)-phenyl)-2, 3- phthal-azin-1-one dianhydride and three amines, and characterized. The polymers show good solubility and thermal properties.展开更多
The direct polymerization of an unsymmetrical kink non-coplanar heterocyclic diamine (1) with various aromatic bis(trimellitimide)s (2a-e) using triphenyl phosphite and pyridine as condensing agents could generate a s...The direct polymerization of an unsymmetrical kink non-coplanar heterocyclic diamine (1) with various aromatic bis(trimellitimide)s (2a-e) using triphenyl phosphite and pyridine as condensing agents could generate a series of new aromatic poly(amide imide)s (3a-e) containing the kink non-coplanar phthalazinone heterocyclic units in the polymer main chains with inherent viscosities of 0.58-0.66 dL/g. The polymers are readily soluble in a variety of solvents such as N,N- dimethylformamide, N,N-dimethylacetamide, dimethyl sulfoxide, N-methyl-2-pyrrolidinone, pyridine and m-cresol and can be cast to form flexible and tough films. The glass transition temperatures of polymers (Tg) are in the range of 301-327°C, and the temperatures for 5% weight loss in nitrogen are in the range of 498-521 'C.展开更多
In order to lower the imidization temperature of polyamic acids（PAA）, the catalytic activities of the curing agents p-hydroxybenzoic acid（PHA）, quinoline（QL）, benzimidazole（BI）, benzotriazole（BTA）, triethyla...In order to lower the imidization temperature of polyamic acids（PAA）, the catalytic activities of the curing agents p-hydroxybenzoic acid（PHA）, quinoline（QL）, benzimidazole（BI）, benzotriazole（BTA）, triethylamine（Et_3N） and 1, 8-diazabicyclo [5.4.0]undec-7-ene（DBU） were investigated in the process of thermal imidization of PAA. In addition, the effect of these various curing agents on the thermal stabilities and mechanical properties of the resultant polyimide（PI） films was determined. Quinoline was found to be an effective curing accelerator in the use of two-step method for synthesizing PI. Due to its moderate base strength, low steric crowding effect and moderate boiling point, quinoline could not only accelerate PAA to achieve imidization completely at 180 ℃, but also maintain the mechanical properties and thermal stability of the ordinary PI film. Any residual quinoline could be removed from PI films by heating at 250 ℃ for 4 h.展开更多
A novel poly(ether imide)s containing phthalazinone and isopropyl moieties derived from 2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl]-phthalazin-1-one and bisphenol-A diphthalic anhydride was synthesized by one-step ...A novel poly(ether imide)s containing phthalazinone and isopropyl moieties derived from 2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl]-phthalazin-1-one and bisphenol-A diphthalic anhydride was synthesized by one-step solution condensation polymerization in nr-cresol. The polymer was characterized by FTIR, NMR, molecular weights, glass transition temperature, thermal degradation temperature and WAXD.展开更多
Polyimides are well-known for their high chemical inertness and thermal stability. However, it is usually challenging to synthesize UV-curable polyimides since the imidization reaction requires such harsh conditions t...Polyimides are well-known for their high chemical inertness and thermal stability. However, it is usually challenging to synthesize UV-curable polyimides since the imidization reaction requires such harsh conditions that acrylate type double bonds cannot withstand. In this work, synthetic methods are developed to obtain polyester-imide type binder polymers with high thermal stability, high compatibility with the other components of the black photoresist, and fine photolithographic patterning property for the negative-tone black photoresist. The syntheses of diimide-diacid or diimide-diol intermediates for the polyesterification with dianhydride gave polyester imides which meets this requirement. The photolithographic tests have shown that the patterning of the micron-sized PDL of the organic light emitting diode (OLED) panel could be obtained. This work will interest the researchers working on the design and optimization of thermally stable binder polymers.展开更多
We report a carbon/carbon capacitor based on micro/mesoporous carbon electrodes with cost-effective and eco-friendly aqueous choline bis(trifluoromethylsulfonyl)imide(Ch TFSI)electrolyte with a cosolvent enabling low-...We report a carbon/carbon capacitor based on micro/mesoporous carbon electrodes with cost-effective and eco-friendly aqueous choline bis(trifluoromethylsulfonyl)imide(Ch TFSI)electrolyte with a cosolvent enabling low-temperature operation down to-30℃.For this purpose,a Mg O-templated hierarchical carbon(MP98B)with an average mesopore diameter of 3.5 nm was prepared by pyrolysis of magnesium citrate hydrate at 900℃.To reach lower temperatures,the melting point and viscosity of the aqueous electrolyte were reduced by mixing water(W)with an organic solvent(methanol,M,or isopropanol,I)of high dielectric constant and low viscosity.5 mol kg^(-1)(5 m)Ch TFSI in an optimized volume fraction of cosolvent,M_(0.75)W_(0.25),and I_(0.75)W_(0.25),showed the highest conductivity;the higher conductivity in M_(0.75)W_(0.25)(22.8 and 3.1 m S cm^(-1) at 20 and-30℃,respectively)than in I_(0.75)W_(0.25)(8.5 and0.5 m S cm^(-1)at 20 and-30℃,respectively)is attributed to the lower viscosity of the M_(0.75)W_(0.25)solution.The electrochemical stability window(ESW)of 5 m Ch TFSI in M_(0.75)W_(0.25)and I_(0.75)W_(0.25)(1.6 V)on an MP98B electrode was determined by applying the S-method.Meanwhile,by adjusting the mass ratio of the two electrodes,a MP98B/MP98B capacitor using the 5 m electrolyte in M_(0.75)W_(0.25)could operate with a good life span up to 1.6 V while exhibiting a better charge propagation,greater specific capacitance,and higher specific energy than in I_(0.75)W_(0.25).展开更多
The synthesis and characterization of a series of novel poly(aryl amide imide)s based on o diphenyltrimellitic anhydride are described.The poly(aryl amide imide)s having inherent viscosities of 0.39-1.43dL/g in N m...The synthesis and characterization of a series of novel poly(aryl amide imide)s based on o diphenyltrimellitic anhydride are described.The poly(aryl amide imide)s having inherent viscosities of 0.39-1.43dL/g in N methyl 2 pyrrolidinone at 30℃,were prepared by polymerization with aromatic diamines in N,N-dimethylacetamide and subsequent chemical imidization.All the polymers were amorphous,readily soluble in aprotic polar solvents such as DMAC,NMP,DMF,DMSO,and m cresol,and could be cast to form flexible and tough films.The glass trsanition temperatures were in the range of 284-336℃,and the temperatures for 5% weight loss in nitrogen were above 468℃.展开更多
The ferrocenyl compound, N-phenylbis（ferrocenecarboxyl）imide （C28H23NO2Fe2, Mr = 517.17）, was synthesized and structurally characterized by means of X-ray single-crystal diffraction. It crystallizes in monoclinic,...The ferrocenyl compound, N-phenylbis（ferrocenecarboxyl）imide （C28H23NO2Fe2, Mr = 517.17）, was synthesized and structurally characterized by means of X-ray single-crystal diffraction. It crystallizes in monoclinic, space group C2/c with a = 21.374（14）, b = 10.430（7）, c = 10.741（7） A, β= 114.184（8）°, V= 2184（2） A^3, Z= 4, Dc = 1.573 g/cm^3, F（000） = 1064, μ（MoKα） = 1.355 mm ^-1, T= 291（2） K, the final R = 0.0548 and wR = 0.1437 for 1524 observed reflections with 1 〉 2σ（I）. In this compound, the nitrogen atom links two ferrocenyl groups and one phenyl group forming a novel imido derivative.展开更多
A novel imide nickel complex [Ni（CH3CONCOCH3）2·2（H2O）] was synthesized by the solvothermal reaction of nickel acetate tetrahydrate and acetonitrile.What amazed us is that acetonitrile had changed into acetyl ...A novel imide nickel complex [Ni（CH3CONCOCH3）2·2（H2O）] was synthesized by the solvothermal reaction of nickel acetate tetrahydrate and acetonitrile.What amazed us is that acetonitrile had changed into acetyl imide in enol form during the formation process of the title complex.The complex was characterized by elemental analysis,IR spectrum and X-ray single-crystal diffraction analysis.It crystallizes in the orthorhombic system,space group Pbca with a = 7.4503（7）,b = 13.1089（12）,c = 14.1303（14）,V = 1380.0（2）3,Dc = 1.420 g/cm3,Mr = 294.94,Z = 4,F（000） = 616,μ = 1.422 mm-1,the final R = 0.0487 and wR = 0.1482.The four-coordinated nickel（II） center is surrounded by 4O atoms from two imide ligands and has a distorted square planar geometry.The complex is connected to form a supramolecule with an infinite three-dimensional network through intramolecular and intermolecular hydrogen bonds.Antimicrobial activity was investigated by agar diffusion method,and the result showed that the complex was active against coli bacillus,staphylococcus aureus and bacillus subtilis.The thermal stability of the title complex was also studied by TG-DTA method.展开更多
A new series of near infrared（NIR） electrochromic anthraquinone imides containing a triphenylamine moiety as an electron donor was synthesized and their electrochemical and spectroelectrochemical behavior were inves...A new series of near infrared（NIR） electrochromic anthraquinone imides containing a triphenylamine moiety as an electron donor was synthesized and their electrochemical and spectroelectrochemical behavior were investigated.The results show that the new anthraquinone imides are redox active which can be reduced electrochemically from the neutral state to the radical anion form that absorbs in a range of 700―1200 nm.展开更多
Literature describes kinetics of reactions of alcohols, phenols, carboxylic acids, amines and amides with oxiranes such as ethylene oxide and propylene oxide. However, there is no information regarding kinetic of reac...Literature describes kinetics of reactions of alcohols, phenols, carboxylic acids, amines and amides with oxiranes such as ethylene oxide and propylene oxide. However, there is no information regarding kinetic of reaction of imides with oxiranes. In this article the kinetics of the reaction of cyclic monoimides: succinimide, phtalimide, and glutarimide, with ethylene and propylene oxides in presence of triethylamine in aprotic solvent was studied. The rate laws for those processes were established based upon on dilatometric measurements. I was said that cyclic monoimides react with oxiranes in presence of triethylamine to give N-(2-hydroxyalkyl)imides as major product. This product react further with oxiranes in consecutive reaction. The kinetics of the reaction of cyclic mono-imides with oxiranes obey the following rate law: V = k1/2 c1/2cat c3/2imide c1/2oxirane. Based upon kinetic data the following orders of reactivity of imides and oxiranes were obtained: phtalimide ≥ succinimide > glutarimide and ethylene oxide > propylene oxide. The solvent (DMF, DMSO and dioxane) effect was also studied. From temperature dependences the thermodynamic parameters: activation energy, enthalpy and entropy from linear Eyring plots were obtained.展开更多
The kinetics of reaction between cyclic monoimides (succinimide, phtalimide, and glutarimide) with ethylene and propylene oxides in presence of sodium hydroxide was studied. The effect of substrate and catalyst concen...The kinetics of reaction between cyclic monoimides (succinimide, phtalimide, and glutarimide) with ethylene and propylene oxides in presence of sodium hydroxide was studied. The effect of substrate and catalyst concentrations on the course of the reaction was investigated. Kinetics of reaction was studied by dilatometry, i.e. by measuring volume contraction of reaction mixture. The kinetic law describing the reaction of imides with oxiranes is: . where ccat, cAH and cB are concentrations of catalyst, imide, and oxirane, respectively. The relative reactivity of imides and oxiranes was: GI > PI ≥ SI and EO > PO. The reaction mechanism was proposed based upon experimentally determined rate law for the reaction of cyclic monoimides and oxiranes as well as analytical and instrumental analysis of products. The elementary reaction between oxirane and imide anion is rate determining step. The imide anion is formed by hydrogen cation transfer into catalytic hydroxide anion from dissociated NaOH. In the consecutive elemental reaction an imidate anion attack on the oxirane molecule occurs. It is the slowest stage of the reaction, limiting the entire process. All the studied reactions obey the same mechanism as can be concluded from isokinetic relationship of studied systems)展开更多
The mechanism of reaction of cyclic monoimides with oxiranes was established based upon kinetic studies and product analysis. It has been established that the reaction proceeds through initial formation of an adduct o...The mechanism of reaction of cyclic monoimides with oxiranes was established based upon kinetic studies and product analysis. It has been established that the reaction proceeds through initial formation of an adduct of imide and triethylamine. The crucial bond in adduct has ionic character;in non-aqueous solvents it is present as ion pair, while in water the adduct dissociate and free ions are present. The adduct enables the proton transfer from imide to oxirane. The rate determining step is reaction of imide and this adduct. Different values of entropy of transition states obtained from thermodynamic calculations suggest slightly different structure of transition state of rate determining step.展开更多
Polymeric carbon nitride(PCN)has garnered increasing attention as a metal-free photocatalyst with a suitable band gap.In efforts to enhance its photocatalytic performance,researchers have examined various PCN material...Polymeric carbon nitride(PCN)has garnered increasing attention as a metal-free photocatalyst with a suitable band gap.In efforts to enhance its photocatalytic performance,researchers have examined various PCN materials,including poly(heptazine imide)(PHI)and poly(triazine imide)(PTI),two isomers within the PCN family that exhibit distinct and superior photocatalytic activity compared to other forms.The challenge,however,lies in the common practice among researchers to categorize PHI and PTI along with other PCN types under the overarching term“g-C_(3)N_(4),”which significantly impedes optimization efforts.The objective of this review is to provide comprehensive insights into the structural features,photoelectrochemical properties,and effective characterization methods employed for distinguishing between PHI and PTI materials.The review also summarizes various optimization strategies,such as crystallinity adjustments,defect engineering,morphology control,constructing heterojunction,and atomic-level metal loading dispersion,to elevate the photocatalytic activity of PHI and PTI,in addition to summarizing the history of carbon nitride development.Furthermore,this review highlights the primary applications of PHI and PTI,encompassing nitrogen fixation,biomass conversion,organic synthesis,CO_(2)reduction,pollutant degradation,H_(2)O_(2)production,and photocatalytic water splitting.Lastly,the prospects and challenges associated with further advancing PHI and PTI are thoroughly examined.展开更多
Poly(heptazine imide)(PHI),a semicrystalline version of carbon nitride photocatalyst based on heptazine units,has gained significant attention for solar H_(2)production benefiting from its advantages including molecul...Poly(heptazine imide)(PHI),a semicrystalline version of carbon nitride photocatalyst based on heptazine units,has gained significant attention for solar H_(2)production benefiting from its advantages including molecular synthetic versatility,excellent physicochemical stability and suitable energy band structure to capture visible photons.Typically,PHI is obtained in saltmelt synthesis in the presence of alkali metal chlorides.Herein,we examined the role of binary alkali metal bromides(LiBr/NaBr)with diverse compositions and melting points to rationally modulate the polymerization process,structure,and properties of PHI.Solid characterizations revealed that semicrystalline PHI with a condensedπ-conjugated system and rapid charge separation rates were obtained in the presence of LiBr/NaBr.Accordingly,the apparent quantum yield of hydrogen using the optimized PHI reaches up to 62.3%at 420 nm.The density functional theory calculation shows that the dehydrogenation of the ethylene glycol has a lower energy barrier than the dehydrogenation of the other alcohols from the thermodynamic point of view.This study holds great promise for rational modulation of the structure and properties of conjugated polymeric materials.展开更多
Organic conjugated polymers have received extensive attention due to their unique electronic properties.However,there have been relatively few reports on the dark photocatalytic reactions utilizing organic conjugated ...Organic conjugated polymers have received extensive attention due to their unique electronic properties.However,there have been relatively few reports on the dark photocatalytic reactions utilizing organic conjugated polymers.Herein,we report the successful synthesis of an organic conjugated polymer based on poly(heptazine imide)nanocrystals(CNNCs)for H_(2)O_(2)evolution and biomedical applications using a simple salt molten method and sonication-centrifugation process.The results show that these colloid CNNCs have the characteristics of photogenerated electrons accumulation and realize dark photocatalysis with high reducibility under visible light irradiation.Notably,these accumulating photogenerated electrons can reduce O_(2)in darkness to produce H_(2)O_(2).In addition,cytotoxicity tests were conducted and it was found that H_(2)O_(2)produced under dark conditions could oxidize L-arginine(L-Arg)to NO,which effectively killed tumors in the dark.This work provides an important strategy to construct organic conjugated semiconductor nanocrystals and applying them to future energy and biomedical fields.展开更多
基金supported by the National Natural Science Foundation of China (52373065)the Joint Fund of Ministry of Education for Equipment Pre-research (8091B032206)+1 种基金the Guang Dong Basic and Applied Basic Research Foundation (2021A1515111067,2023A1515010735)the start-up funding of“Hundred Talent Program”from Sun Yat-sen University。
文摘The notorious growth of zinc dendrite and the water-induced corrosion of zinc metal anodes(ZMAs)restrict the practical development of aqueous zinc ion batteries(AZIBs).In this work,a zinc metallized,imide-pillared covalent organic framework(ZPC)protective film has been engineered as a stable Zn^(2+)ion-conducting interphase to modulate interfacial kinetics and suppress side reactions for ZMAs.Compared to bare Zn,ZPC@Zn exhibits a higher Zn^(2+)ionic conductivity,a larger Zn^(2+)transference number,a lower electronic conductivity,a smaller desolvation activation energy and correspondingly a significant suppression of corrosion,hydrogen evolution and Zn dendrites.Impressively,the ZPC@Zn||ZPC@Zn symmetric cell obtains a cycling lifespan over 3000 h under 5 mA cm^(-2)for 1 mA h cm^(-2).The ZPC@Zn||NH_(4)V_(4)O_(10)coin-type full battery delivers a specific capacity of 195.8 mA h g^(-1)with a retention rate of78.5%at 2 A g^(-1)after 1100 cycles,and the ZPC@Zn||NH_(4)V_(4)O_(10) pouch full cell shows a retention of70.1%in reversible capacity at 3 A g^(-1)after 1100 cycles.The present incorporation of imide-linked covalent organic frameworks in the surface modification of ZMAs will offer fresh perspectives in the search for ideal protective films for the practicality of AZIBs.
基金This work was supported by 863 Programme of China (No. 715-004-0010).
文摘A new class of poly(ester-imide-ether) multiblock copolymers was synthesized by transes-terification and melt copolymerization of dimethyl terephthalate (DMT) and N-(4-carbomethoxyphenyl)-4-(carbomethoxy)-phthalimide with ethylene glycol (EG) and polytetramethylene glycol (PTMG). The structure of the above copolymers was characterized by H-1-NMR and IR spectroscopy. Some properties of the coplymers were also examined. It was found that their mechanical properties and heat stability, compared with poly(ether-ester) copolymers, were obviously improved.
基金Project supported by the Beijing S&T Project,China(Grant No.Z13111000340000)the National Basic Research Program of China(Grant No.2012CB932900)the National Natural Science Foundation of China(Grants Nos.51325206 and 51421002)
文摘The cycling performance, impedance variation, and cathode surface evolution of the Li/LiCoO2 cell using Li FSI–KFSI molten salt electrolyte are reported. It is found that this battery shows poor cycling performance, with capacity retention of only about 67% after 20 cycles. It is essential to understand the origin of the instability. It is noticed that the polarization voltage and the impedance of the cell both increase slowly upon cycling. The structure and the properties of the pristine and the cycled LiCoO2 cathodes are investigated by x-ray diffraction（XRD）, scanning electron microscopy（SEM）, Raman spectroscopy, x-ray photoelectron spectroscopy（XPS）, and transmission electron microscopy（TEM）. It is found that the LiCoO2 particles are corroded by this molten salt electrolyte, and the decomposition by-product covers the surface of the LiCoO2 cathode after 20 cycles. Therefore, the surface side reaction explains the instability of the molten salt electrolyte with LiCoO2.
文摘A series of novel aromatic poly ( amide imide)s containing phthalazinone moieties were prepared from 2-(4-aminophenyl)-4-[3-methyl-4-(4-aminophenoxy)-2,3-phthalazinone-1], a novel diamine 1 with four diimide-dicarboxylic acids by Yamazaki phosphorylation method with the inherent viscosity of 0.36~0.65 dL/g. These polymers had high glass transition temperatures above 300C and they lost 10% weight between 426~475C in N2. The structure of diamine 1 and the polymers was confirmed by IR, 1H NMR and MS. The obtained polymers were readily soluble in polar solvents such as NMP, m-cresol etc. and easily cast into tough, flexible films. The X-ray indicated that they are all amorphous.
基金This work was sponsored by the National Natural Science Foundation of China (No. 59473901).
文摘Three novel poly(ether imide)s were synthesized by one-step solution polymerization from 2-(3, 4-dicarboxyl-N-phenyl)-4-(3, 4-dicarboxyl-phenoxyl-4-(2-methyl)-phenyl)-2, 3- phthal-azin-1-one dianhydride and three amines, and characterized. The polymers show good solubility and thermal properties.
基金This work was supported by the Key Natural Science Foundation of Fujian Province (E0320003).
文摘The direct polymerization of an unsymmetrical kink non-coplanar heterocyclic diamine (1) with various aromatic bis(trimellitimide)s (2a-e) using triphenyl phosphite and pyridine as condensing agents could generate a series of new aromatic poly(amide imide)s (3a-e) containing the kink non-coplanar phthalazinone heterocyclic units in the polymer main chains with inherent viscosities of 0.58-0.66 dL/g. The polymers are readily soluble in a variety of solvents such as N,N- dimethylformamide, N,N-dimethylacetamide, dimethyl sulfoxide, N-methyl-2-pyrrolidinone, pyridine and m-cresol and can be cast to form flexible and tough films. The glass transition temperatures of polymers (Tg) are in the range of 301-327°C, and the temperatures for 5% weight loss in nitrogen are in the range of 498-521 'C.
文摘In order to lower the imidization temperature of polyamic acids（PAA）, the catalytic activities of the curing agents p-hydroxybenzoic acid（PHA）, quinoline（QL）, benzimidazole（BI）, benzotriazole（BTA）, triethylamine（Et_3N） and 1, 8-diazabicyclo [5.4.0]undec-7-ene（DBU） were investigated in the process of thermal imidization of PAA. In addition, the effect of these various curing agents on the thermal stabilities and mechanical properties of the resultant polyimide（PI） films was determined. Quinoline was found to be an effective curing accelerator in the use of two-step method for synthesizing PI. Due to its moderate base strength, low steric crowding effect and moderate boiling point, quinoline could not only accelerate PAA to achieve imidization completely at 180 ℃, but also maintain the mechanical properties and thermal stability of the ordinary PI film. Any residual quinoline could be removed from PI films by heating at 250 ℃ for 4 h.
文摘A novel poly(ether imide)s containing phthalazinone and isopropyl moieties derived from 2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl]-phthalazin-1-one and bisphenol-A diphthalic anhydride was synthesized by one-step solution condensation polymerization in nr-cresol. The polymer was characterized by FTIR, NMR, molecular weights, glass transition temperature, thermal degradation temperature and WAXD.
文摘Polyimides are well-known for their high chemical inertness and thermal stability. However, it is usually challenging to synthesize UV-curable polyimides since the imidization reaction requires such harsh conditions that acrylate type double bonds cannot withstand. In this work, synthetic methods are developed to obtain polyester-imide type binder polymers with high thermal stability, high compatibility with the other components of the black photoresist, and fine photolithographic patterning property for the negative-tone black photoresist. The syntheses of diimide-diacid or diimide-diol intermediates for the polyesterification with dianhydride gave polyester imides which meets this requirement. The photolithographic tests have shown that the patterning of the micron-sized PDL of the organic light emitting diode (OLED) panel could be obtained. This work will interest the researchers working on the design and optimization of thermally stable binder polymers.
基金financially supported by the National Science Centre(MAESTRO project UMO-2016/22/A/ST4/00092)。
文摘We report a carbon/carbon capacitor based on micro/mesoporous carbon electrodes with cost-effective and eco-friendly aqueous choline bis(trifluoromethylsulfonyl)imide(Ch TFSI)electrolyte with a cosolvent enabling low-temperature operation down to-30℃.For this purpose,a Mg O-templated hierarchical carbon(MP98B)with an average mesopore diameter of 3.5 nm was prepared by pyrolysis of magnesium citrate hydrate at 900℃.To reach lower temperatures,the melting point and viscosity of the aqueous electrolyte were reduced by mixing water(W)with an organic solvent(methanol,M,or isopropanol,I)of high dielectric constant and low viscosity.5 mol kg^(-1)(5 m)Ch TFSI in an optimized volume fraction of cosolvent,M_(0.75)W_(0.25),and I_(0.75)W_(0.25),showed the highest conductivity;the higher conductivity in M_(0.75)W_(0.25)(22.8 and 3.1 m S cm^(-1) at 20 and-30℃,respectively)than in I_(0.75)W_(0.25)(8.5 and0.5 m S cm^(-1)at 20 and-30℃,respectively)is attributed to the lower viscosity of the M_(0.75)W_(0.25)solution.The electrochemical stability window(ESW)of 5 m Ch TFSI in M_(0.75)W_(0.25)and I_(0.75)W_(0.25)(1.6 V)on an MP98B electrode was determined by applying the S-method.Meanwhile,by adjusting the mass ratio of the two electrodes,a MP98B/MP98B capacitor using the 5 m electrolyte in M_(0.75)W_(0.25)could operate with a good life span up to 1.6 V while exhibiting a better charge propagation,greater specific capacitance,and higher specific energy than in I_(0.75)W_(0.25).
文摘The synthesis and characterization of a series of novel poly(aryl amide imide)s based on o diphenyltrimellitic anhydride are described.The poly(aryl amide imide)s having inherent viscosities of 0.39-1.43dL/g in N methyl 2 pyrrolidinone at 30℃,were prepared by polymerization with aromatic diamines in N,N-dimethylacetamide and subsequent chemical imidization.All the polymers were amorphous,readily soluble in aprotic polar solvents such as DMAC,NMP,DMF,DMSO,and m cresol,and could be cast to form flexible and tough films.The glass trsanition temperatures were in the range of 284-336℃,and the temperatures for 5% weight loss in nitrogen were above 468℃.
基金the National Natural Science Foundation of China (No. 20501017)
文摘The ferrocenyl compound, N-phenylbis（ferrocenecarboxyl）imide （C28H23NO2Fe2, Mr = 517.17）, was synthesized and structurally characterized by means of X-ray single-crystal diffraction. It crystallizes in monoclinic, space group C2/c with a = 21.374（14）, b = 10.430（7）, c = 10.741（7） A, β= 114.184（8）°, V= 2184（2） A^3, Z= 4, Dc = 1.573 g/cm^3, F（000） = 1064, μ（MoKα） = 1.355 mm ^-1, T= 291（2） K, the final R = 0.0548 and wR = 0.1437 for 1524 observed reflections with 1 〉 2σ（I）. In this compound, the nitrogen atom links two ferrocenyl groups and one phenyl group forming a novel imido derivative.
基金supported by the Natural Science Foundation of Jiangsu Province (No. BK2005045) and Key Marine Biotechnology Lab.of HHIT
文摘A novel imide nickel complex [Ni（CH3CONCOCH3）2·2（H2O）] was synthesized by the solvothermal reaction of nickel acetate tetrahydrate and acetonitrile.What amazed us is that acetonitrile had changed into acetyl imide in enol form during the formation process of the title complex.The complex was characterized by elemental analysis,IR spectrum and X-ray single-crystal diffraction analysis.It crystallizes in the orthorhombic system,space group Pbca with a = 7.4503（7）,b = 13.1089（12）,c = 14.1303（14）,V = 1380.0（2）3,Dc = 1.420 g/cm3,Mr = 294.94,Z = 4,F（000） = 616,μ = 1.422 mm-1,the final R = 0.0487 and wR = 0.1482.The four-coordinated nickel（II） center is surrounded by 4O atoms from two imide ligands and has a distorted square planar geometry.The complex is connected to form a supramolecule with an infinite three-dimensional network through intramolecular and intermolecular hydrogen bonds.Antimicrobial activity was investigated by agar diffusion method,and the result showed that the complex was active against coli bacillus,staphylococcus aureus and bacillus subtilis.The thermal stability of the title complex was also studied by TG-DTA method.
基金Supported by the Development Program for Outstanding Young Teachers in Harbin Institute of Technology,China(No.HITQNJS.2009.020).
文摘A new series of near infrared（NIR） electrochromic anthraquinone imides containing a triphenylamine moiety as an electron donor was synthesized and their electrochemical and spectroelectrochemical behavior were investigated.The results show that the new anthraquinone imides are redox active which can be reduced electrochemically from the neutral state to the radical anion form that absorbs in a range of 700―1200 nm.
文摘Literature describes kinetics of reactions of alcohols, phenols, carboxylic acids, amines and amides with oxiranes such as ethylene oxide and propylene oxide. However, there is no information regarding kinetic of reaction of imides with oxiranes. In this article the kinetics of the reaction of cyclic monoimides: succinimide, phtalimide, and glutarimide, with ethylene and propylene oxides in presence of triethylamine in aprotic solvent was studied. The rate laws for those processes were established based upon on dilatometric measurements. I was said that cyclic monoimides react with oxiranes in presence of triethylamine to give N-(2-hydroxyalkyl)imides as major product. This product react further with oxiranes in consecutive reaction. The kinetics of the reaction of cyclic mono-imides with oxiranes obey the following rate law: V = k1/2 c1/2cat c3/2imide c1/2oxirane. Based upon kinetic data the following orders of reactivity of imides and oxiranes were obtained: phtalimide ≥ succinimide > glutarimide and ethylene oxide > propylene oxide. The solvent (DMF, DMSO and dioxane) effect was also studied. From temperature dependences the thermodynamic parameters: activation energy, enthalpy and entropy from linear Eyring plots were obtained.
文摘The kinetics of reaction between cyclic monoimides (succinimide, phtalimide, and glutarimide) with ethylene and propylene oxides in presence of sodium hydroxide was studied. The effect of substrate and catalyst concentrations on the course of the reaction was investigated. Kinetics of reaction was studied by dilatometry, i.e. by measuring volume contraction of reaction mixture. The kinetic law describing the reaction of imides with oxiranes is: . where ccat, cAH and cB are concentrations of catalyst, imide, and oxirane, respectively. The relative reactivity of imides and oxiranes was: GI > PI ≥ SI and EO > PO. The reaction mechanism was proposed based upon experimentally determined rate law for the reaction of cyclic monoimides and oxiranes as well as analytical and instrumental analysis of products. The elementary reaction between oxirane and imide anion is rate determining step. The imide anion is formed by hydrogen cation transfer into catalytic hydroxide anion from dissociated NaOH. In the consecutive elemental reaction an imidate anion attack on the oxirane molecule occurs. It is the slowest stage of the reaction, limiting the entire process. All the studied reactions obey the same mechanism as can be concluded from isokinetic relationship of studied systems)
文摘The mechanism of reaction of cyclic monoimides with oxiranes was established based upon kinetic studies and product analysis. It has been established that the reaction proceeds through initial formation of an adduct of imide and triethylamine. The crucial bond in adduct has ionic character;in non-aqueous solvents it is present as ion pair, while in water the adduct dissociate and free ions are present. The adduct enables the proton transfer from imide to oxirane. The rate determining step is reaction of imide and this adduct. Different values of entropy of transition states obtained from thermodynamic calculations suggest slightly different structure of transition state of rate determining step.
基金supported by the National Natural Science Foundation of China(No.52273264)。
文摘Polymeric carbon nitride(PCN)has garnered increasing attention as a metal-free photocatalyst with a suitable band gap.In efforts to enhance its photocatalytic performance,researchers have examined various PCN materials,including poly(heptazine imide)(PHI)and poly(triazine imide)(PTI),two isomers within the PCN family that exhibit distinct and superior photocatalytic activity compared to other forms.The challenge,however,lies in the common practice among researchers to categorize PHI and PTI along with other PCN types under the overarching term“g-C_(3)N_(4),”which significantly impedes optimization efforts.The objective of this review is to provide comprehensive insights into the structural features,photoelectrochemical properties,and effective characterization methods employed for distinguishing between PHI and PTI materials.The review also summarizes various optimization strategies,such as crystallinity adjustments,defect engineering,morphology control,constructing heterojunction,and atomic-level metal loading dispersion,to elevate the photocatalytic activity of PHI and PTI,in addition to summarizing the history of carbon nitride development.Furthermore,this review highlights the primary applications of PHI and PTI,encompassing nitrogen fixation,biomass conversion,organic synthesis,CO_(2)reduction,pollutant degradation,H_(2)O_(2)production,and photocatalytic water splitting.Lastly,the prospects and challenges associated with further advancing PHI and PTI are thoroughly examined.
基金National Key R&D Program of China,Grant/Award Number:2021YFA1502100National Natural Science Foundation of China,Grant/Award Number:22172029Science Foundation of the Fujian Province,Grant/Award Number:2022L3084。
文摘Poly(heptazine imide)(PHI),a semicrystalline version of carbon nitride photocatalyst based on heptazine units,has gained significant attention for solar H_(2)production benefiting from its advantages including molecular synthetic versatility,excellent physicochemical stability and suitable energy band structure to capture visible photons.Typically,PHI is obtained in saltmelt synthesis in the presence of alkali metal chlorides.Herein,we examined the role of binary alkali metal bromides(LiBr/NaBr)with diverse compositions and melting points to rationally modulate the polymerization process,structure,and properties of PHI.Solid characterizations revealed that semicrystalline PHI with a condensedπ-conjugated system and rapid charge separation rates were obtained in the presence of LiBr/NaBr.Accordingly,the apparent quantum yield of hydrogen using the optimized PHI reaches up to 62.3%at 420 nm.The density functional theory calculation shows that the dehydrogenation of the ethylene glycol has a lower energy barrier than the dehydrogenation of the other alcohols from the thermodynamic point of view.This study holds great promise for rational modulation of the structure and properties of conjugated polymeric materials.
基金supported by the National Natural Science Foundation of China(Nos.22302154,U22A20391,22078256,22202043 and 82202355)Innovation Capability Support Program of Shanxi(No.2023-CX-TD-26)+3 种基金the Programme of Introducing Talents of Discipline to Universities(No.B23025)the“Young Talent Support Plan”of Xi’an Jiaotong University(No.HG6J030)the high-level innovation and entrepreneurship talent project of Qinchuangyuan(No.QCYRCXM-2023-98)the Young and Middle-aged Scholars Project of Fujian Province(No.JAT210368).
文摘Organic conjugated polymers have received extensive attention due to their unique electronic properties.However,there have been relatively few reports on the dark photocatalytic reactions utilizing organic conjugated polymers.Herein,we report the successful synthesis of an organic conjugated polymer based on poly(heptazine imide)nanocrystals(CNNCs)for H_(2)O_(2)evolution and biomedical applications using a simple salt molten method and sonication-centrifugation process.The results show that these colloid CNNCs have the characteristics of photogenerated electrons accumulation and realize dark photocatalysis with high reducibility under visible light irradiation.Notably,these accumulating photogenerated electrons can reduce O_(2)in darkness to produce H_(2)O_(2).In addition,cytotoxicity tests were conducted and it was found that H_(2)O_(2)produced under dark conditions could oxidize L-arginine(L-Arg)to NO,which effectively killed tumors in the dark.This work provides an important strategy to construct organic conjugated semiconductor nanocrystals and applying them to future energy and biomedical fields.
