Optical metasurfaces,comprising subwavelength quasi-planar nanostructures,constitute a universal platform for manipulating the amplitude,phase,and polarization of light,thus paving a way for the next generation of hig...Optical metasurfaces,comprising subwavelength quasi-planar nanostructures,constitute a universal platform for manipulating the amplitude,phase,and polarization of light,thus paving a way for the next generation of highly integrated multifunctional optical devices.In this work,we introduce a reflective metasurface for the generation of a complete(angularly resolved)polarization set by randomly interleaving anisotropic plasmonic meta-atoms acting as nanoscale wave plates.In the proof-of-concept demonstration,we achieve multidirectional beam-steering into different polarization channels forming a complete set of polarization states,which can also be dynamically altered by switching the spin of incident light.The developed design concept represents a significant advancement in achieving flat polarization optics with advanced functionalities.展开更多
This work focuses on the fuzzy controller for the proposed three-phase interleaved Step-up converter(ISC).The fuzzy controller for the proposed ISC converters for electric vehicles has been discussed in detail.The pro...This work focuses on the fuzzy controller for the proposed three-phase interleaved Step-up converter(ISC).The fuzzy controller for the proposed ISC converters for electric vehicles has been discussed in detail.The proposed ISC direct current(DC-DC)converter could also be used in automobiles,satellites,industries,and propulsion.To enhance voltage gain,the proposed ISC Converter combines boost converter and interleaved converter(IC).This design also reduces the number of switches.As a result,ISC converter switching losses are reduced.The proposed ISC Converter topology can produce a 143 V output voltage and 1 kW of power.Due to the high voltage gain of this converter design,it is suitable for medium and high-power systems.The proposed ISC Converter topology is simulated in MATLAB/Simulink.The simulated output displays a high output voltage.But the output voltage contains maximum ripples.Fuzzy proposes an ISC Converter which makes closed loop responsiveness and reduces the output voltage ripple.The proposed ISC converter has the lowest ripple output voltage,which is less than 2%,because the duty cycle is regulated using the fuzzy logic controller.It offers high voltage gain,minimal ripple,and low switching loss.The performance of the proposed converter is compared to that of the fuzzy and Pro-portional Integral(PI)controllers implemented in MATLAB.展开更多
The generation of electricity based on renewable energy sources,parti-cularly Photovoltaic(PV)system has been greatly increased and it is simply insti-gated for both domestic and commercial uses.The power generated fr...The generation of electricity based on renewable energy sources,parti-cularly Photovoltaic(PV)system has been greatly increased and it is simply insti-gated for both domestic and commercial uses.The power generated from the PV system is erratic and hence there is a need for an efficient converter to perform the extraction of maximum power.An improved interleaved Single-ended Primary Inductor-Converter(SEPIC)converter is employed in proposed work to extricate most of power from renewable source.This proposed converter minimizes ripples,reduces electromagnetic interference due tofilter elements and the contin-uous input current improves the power output of PV panel.A Crow Search Algo-rithm(CSA)based Proportional Integral(PI)controller is utilized for controlling the converter switches effectively by optimizing the parameters of PI controller.The optimized PI controller reduces ripples present in Direct Current(DC)vol-tage,maintains constant voltage at proposed converter output and reduces over-shoots with minimum settling and rise time.This voltage is given to single phase grid via 1�Voltage Source Inverter(VSI).The command pulses of 1�VSI are produced by simple PI controller.The response of the proposed converter is thus improved with less input current.After implementing CSA based PI the efficiency of proposed converter obtained is 96%and the Total Harmonic Distor-tion(THD)is found to be 2:4%.The dynamics and closed loop operation is designed and modeled using MATLAB Simulink tool and its behavior is performed.展开更多
Design method of split planar resonant inductor in 1 kV SiC logical link control(LLC)converter is proposed,which ensures the converter power density of 93.59 W/in^3 and peak efficiency of 95.73%.Split resonant inducto...Design method of split planar resonant inductor in 1 kV SiC logical link control(LLC)converter is proposed,which ensures the converter power density of 93.59 W/in^3 and peak efficiency of 95.73%.Split resonant inductor helps to provide symmetrical resonant current by symmetrical impedance,and improves the distortion of resonant current,which ensures the efficiency of the whole converter.An interleaved winding connecting scheme improves the power density of the planar magnets,which contributes to power density improvement.Design method and calculation process of such split planar resonant inductor are provided.To verify the feasibility of the proposed design method,a 1 kV/48 V 6.6 kW,210 k Hz SiC LLC prototype was built,and the experimental results are given.展开更多
For communication systems with heavy burst noise, an optimal Forward Error Correction(FEC) scheme is expected to have a large burst error correction capability while simultaneously owning moderate random error correct...For communication systems with heavy burst noise, an optimal Forward Error Correction(FEC) scheme is expected to have a large burst error correction capability while simultaneously owning moderate random error correction capability. This letter presents a new FEC scheme based on multiple-symbol interleaved Reed-Solomon codes and an associated two-pass decoding algorithm. It is shown that the proposed multi-symbol interleaved Reed-Solomon scheme can achieve nearly twice as much as the burst error correction capability of conventional single-symbol interleaved Reed-Solomon codes with the same code length and code rate.展开更多
Parallel converter can significantly increase the capacity of the converter and improve the power quality of AC side, but the circulation which can lead to high switching loss and even damage the devices will easily e...Parallel converter can significantly increase the capacity of the converter and improve the power quality of AC side, but the circulation which can lead to high switching loss and even damage the devices will easily exist in the direct parallel converters. In this paper, the average model of parallel interleaved inverters system to analyze the circulation current is shown, and the cross current is relevant to DC-bus voltage and the overlap time of zero vectors in the switching period. Based on this observation, a discontinuous space vector modulation without using zero vectors (000) is eliminate and suppress the zero-sequence current to entire system. Finally, the effectiveness of modulation strategy is verified by the simulations in this paper.展开更多
Taking Jiuhong Modern Agriculture Demonstration Park of Heilongjiang Province as the base for rice disease image acquisition,a total of 841 images of the four different diseases,including rice blast,stripe leaf blight...Taking Jiuhong Modern Agriculture Demonstration Park of Heilongjiang Province as the base for rice disease image acquisition,a total of 841 images of the four different diseases,including rice blast,stripe leaf blight,red blight and bacterial brown spot,were obtained.In this study,an interleaved attention neural network(IANN)was proposed to realize the recognition of rice disease images and an interleaved group convolutions(IGC)network was introduced to reduce the number of convolutional parameters,which realized the information interaction between channels.Based on the convolutional block attention module(CBAM),attention was paid to the features of results of the primary group convolution in the cross-group convolution to improve the classification performance of the deep learning model.The results showed that the classification accuracy of IANN was 96.14%,which was 4.72%higher than that of the classical convolutional neural network(CNN).This study showed a new idea for the efficient training of neural networks in the case of small samples and provided a reference for the image recognition and diagnosis of rice and other crop diseases.展开更多
In this paper, we propose the receiver structure for Multiple Input Multiple Output (MIMO) Interleaved Single Carrier-Frequency Division Multiple Access (SC-FDMA) where the Frequency Domain Equalization (FDE) is first...In this paper, we propose the receiver structure for Multiple Input Multiple Output (MIMO) Interleaved Single Carrier-Frequency Division Multiple Access (SC-FDMA) where the Frequency Domain Equalization (FDE) is firstly done for obtaining the tentative decision results and secondly using them the Inter-Symbol Interference (ISI) is cancelled by ISI canceller and then the Maximum Likelihood Detection (MLD) is used for separating the spatially multiplexed signals. Furthermore the output from MLD is fed back to ISI canceller repeatedly. In order to reduce the complexity, we replace the MLD by QR Decomposition with M-Algorithm (QRD-M) or Sphere Decoding (SD). Moreover, we add the soft output function to SD using Repeated Tree Search (RTS) algorithm to generate soft replica for ISI cancellation. We also refer to the Single Tree Search (STS) algorithm to further reduce the complexity of RTS. By examining the BER characteristics and the complexity reduction through computer simulations, we have verified the effectiveness of proposed receiver structure.展开更多
Interfacing DC sources to load/power grid requires DC converters that produce minimum level of current ripples. This is to limit the losses and hence increase the life span of these sources. This article proposes a si...Interfacing DC sources to load/power grid requires DC converters that produce minimum level of current ripples. This is to limit the losses and hence increase the life span of these sources. This article proposes a simple inter-leaved boost converter that interfaces PhotoVoltaic (PV) module into a common DC-link. The article also addresses the faulty mode operation of the proposed circuit while advising the appropriate remedy actions. A MATLAB and Simulink dynamic platform are used to simulate the transient performance of the proposed converter. The results revealed the effectiveness and the viability of the proposed converter in reducing the ripples in the PV current without employing bulky input inductors or increasing the switching frequency.展开更多
Today, energy saving is one of the main objectives for engineers. In the case of mobile applications, energy can be saved by two different ways： decreasing the total masse of the system and increasing the efficiency ...Today, energy saving is one of the main objectives for engineers. In the case of mobile applications, energy can be saved by two different ways： decreasing the total masse of the system and increasing the efficiency of the overall system. This paper presents two optimization strategies to design a predefined multichannel structure of a boost converter which is dedicated to a solar airplane and used to interface PV panels and the battery system. The first strategy is a multi-criterion method that is able to trace the dependency between the converter＇s efficiency and its power density through the intermediary of the Pareto front. The second method, a mono-criterion approach, maximizes efficiency while respecting the constraint imposed on power density. The mono-criterion method that is applied to maximizing the European efficiency criterion showed that an increase in the number of channels enhanced the quantity of energy collected over a day by increasing the power density of the converter. At the end of the paper, the optimal design calculated was built to give an example of the result obtained by this design methodology. The results of the efficiency measurements made on a realized prototype are presented in this paper.展开更多
This paper proposes the design and experimentation of digital control of soft-switched interleaved boost converter using FPGA for Telecommunication System. The switching devices in the proposed converter are turned on...This paper proposes the design and experimentation of digital control of soft-switched interleaved boost converter using FPGA for Telecommunication System. The switching devices in the proposed converter are turned on and off with Zero Voltage Switching (ZVS) and Zero Current Switching (ZCS) respectively. The circuit is operated in Continuous Conduction Mode (CCM) with various load ranges having duty cycle of more than 50%. The proposed converter is studied by developing the simulation module in MATLAB/SIMULINK. A PI controller is designed and implemented in FPGA to obtain a regulated DC output for line and load variations. Simulation and experimentation results are verified with a prototype development of the proposed converter. The results indicate that the converter performance is enhanced with closed loop control.展开更多
In the application of long series batteries,there is always the phenomenon that multiple cells in a pack are unbalanced simultaneously.In view of this situation,a modevarying cell equalizer topology based on interleav...In the application of long series batteries,there is always the phenomenon that multiple cells in a pack are unbalanced simultaneously.In view of this situation,a modevarying cell equalizer topology based on interleaved parallel multiple transformers is proposed in this paper.Every unit in this equalizer can freely switch between LLC resonance mode and 3-state LC quasi-resonance mode.The boosting effect of LLC structure is used to reduce the number of transformer’s total turns.When multiple equalizer units need to work in LLC mode simultaneously,interleaved parallel technology is used to limit secondary side equalization current ripple for long-term protection of battery life.A prototype was designed and built to validate the effect of a closed loop LLC mode control algorithm with a state-of-charge(SOC)based equalization scheme selection strategy.Experimental results including up to 88.52%efficiency in LLC mode with 90.7%efficiency in 3-state LC mode,and minute level balancing time show the proposed topology demonstrates excellent balancing performance.展开更多
Let S be a family of binary sequences constructed from interleaved construction. The linear spans of binary sequences in S are studied in this paper. In order to achieve the largest linear span, a criterion is present...Let S be a family of binary sequences constructed from interleaved construction. The linear spans of binary sequences in S are studied in this paper. In order to achieve the largest linear span, a criterion is presented for the base sequences with periodp, where p is a prime and 2 is a primitive root modulop2. It is shown that any sequence in S has the largest linear span under the criterion. Moreover, such base sequences can be chosen easily.展开更多
This paper presents a solar-powered interleaved high-gain boost converter(IHGBC)that increases voltage gain with fewer ripples in the output voltage in comparison to existing DC-DC converters.The goal of this research...This paper presents a solar-powered interleaved high-gain boost converter(IHGBC)that increases voltage gain with fewer ripples in the output voltage in comparison to existing DC-DC converters.The goal of this research is to develop a hybrid-based maximum power point tracking(MPPT)approach with the combination of a flower pollination(FP)algorithm assisted with a perturb&observe(P&O)MPPT approach for solar photovoltaic(SPV)systems integrated with IHGBC.To ensure effective usage of both FP and P&O algorithms,this study incorporates and validates the hybrid-based MPPT approach.The proposed solar-powered IHGBC with a hybrid-based MPPT algorithm has been computationally modelled and simulated using MATLAB®and Simulink®for both uniform and non-uniform irradiation and analysed for voltage gain,ripples in the output waveforms and convergence time.The proposed hybrid-based MPPT is based on a number of flowers that forecast the initial global peak,assisted by P&O in the last stage for faster convergence to attain the maximum power point(MPP).As a result,the hybrid-based MPPT approach alleviates the computational issues encountered in P&O and FP-based MPP approaches.The proposed hybrid MPPT is compared with conventional MPPT for SPV and the results show that the solar-powered IHGBC using a hybrid-based MPPT technique has negligible oscillations of 0.14%with a high-voltage gain of 7.992 and a fast convergence rate of 0.05 seconds compared to individual P&O-based MPPT and FP-based MPPT techniques.The simulation results of the proposed MPPT with IHGBC outperform the conventional MPPT with high-gain converters.展开更多
An interference suppression design scheme based on conjugate weighted butterfly interleaving mapping(CWBIM)is proposed for inter-carrier interference(ICI)and inter-subband interference(IBI)in the received signals of u...An interference suppression design scheme based on conjugate weighted butterfly interleaving mapping(CWBIM)is proposed for inter-carrier interference(ICI)and inter-subband interference(IBI)in the received signals of universal filtered multi-carrier(UFMC)systems.It applies an interleaving mapping operation to subtract the interference coefficients of adjacent terms in ICI and IBI twice,thereby achieving suppression effects similar to the self-cancellation(SC)algorithm while maintaining the original data transmission efficiency.Meanwhile,conjugate and complex weighting operations can effectively suppress the impact of phase rotation errors in high-speed mobile channel environments,thereby further improving the bit error rate(BFR)performance of the system,Moreover,butterfly operation can effectively control the computational complexity of the interleaving mapping process.Theoretical analysis and simulation results show that,compared with the PSC-UFMC algorithm,the CWBIM-UFMC scheme proposed in this paper can effectively suppress ICI and IBI in the received signal without compromising data transmission efficiency and reducing computational complexity,thereby achieving good BER performance of the system.展开更多
(f(x), m)-interleaved sequences over Fq have been proposed and studied. Roughly speaking, an (f(x), m)-interleaved sequence is a sequence which is made of (or say, interleaved by) m component sequences with a common c...(f(x), m)-interleaved sequences over Fq have been proposed and studied. Roughly speaking, an (f(x), m)-interleaved sequence is a sequence which is made of (or say, interleaved by) m component sequences with a common characteristic polynomial (f(x)(∈Fq [x]). in this note, (7(x), m)-interleaved sequences are studied further. As a result, it is made clear how their minimal characteristic polynomials, linear spans and periods are determined by their component sequences. And also, their period distribution and the number of (f(x), m)-interleaved sequences with maximal linear spans are derived. Furthermore, a large number of interleaved sequences with the lowest correlation among ali the (f(x), m)-interleaved sequences are constructed.展开更多
Low correlation zone (LCZ) sequences are useful in quasi-synchronous code-division multiple access (QS-CDMA) communication systems. In this paper, a generic construction of LCZ sequences based on inter-leaved techniqu...Low correlation zone (LCZ) sequences are useful in quasi-synchronous code-division multiple access (QS-CDMA) communication systems. In this paper, a generic construction of LCZ sequences based on inter-leaved technique is investigated. Firstly, the shift sequence is shown to correspond to two-tuple balanced d-form function essentially, which results in new shift sequence. Secondly, an optimal design of p2-ary sequences over the integer residue class ring Zp2 is proposed, which improves the previous construction when p is an odd prime.展开更多
In a time-interleaved analog-to-digital converter （TI ADC）, several individual ADCs operate in parallel to achieve a higher sampling rate. Low power consumption as well as good linearity can be obtained by applying ...In a time-interleaved analog-to-digital converter （TI ADC）, several individual ADCs operate in parallel to achieve a higher sampling rate. Low power consumption as well as good linearity can be obtained by applying successive approximation register （SAR） converters as sub-channel ADCs. In spite of the advantages, this structure suffers from three mismatches, which are offset mismatch, gain mismatch, and time skew. This paper focuses on a TI SAR ADC with a number of channels. The mismatch effects in the frequency domain are analyzed and the derived close form formulas are verified based on Matlab. In addition, we clarify that the standard deviation of DNL and INL of an M-channel TI ADC is reduced by a factor of ~ compared to a single channel ADC. The formulas can be used to derive the corresponding requirements when designing a TI ADC. Our analysis process is able to inform the study of calibration algorithms.展开更多
Reducing power dissipation in electro-optic modulators is a key step for widespread application of silicon photonics to optical communication.In this work,we design Mach–Zehnder modulators in the silicon-on-insulator...Reducing power dissipation in electro-optic modulators is a key step for widespread application of silicon photonics to optical communication.In this work,we design Mach–Zehnder modulators in the silicon-on-insulator platform,which make use of slow light in a waveguide grating and of a reverse-biased p-n junction with interleaved contacts along the waveguide axis.After optimizing the junction parameters,we discuss the full simulation of the modulator in order to find a proper trade-off among various figures of merit,such as modulation efficiency,insertion loss,cutoff frequency,optical modulation amplitude,and dissipated energy per bit.Comparison with conventional structures(with lateral p-n junction and/or in rib waveguides without slow light)highlights the importance of combining slow light with the interleaved p-n junction,thanks to the increased overlap between the travelling optical wave and the depletion regions.As a surprising result,the modulator performance is improved over an optical bandwidth that is much wider than the slow-light bandwidth.展开更多
This paper analyses,simulates and verifies an experimental prototype of a four-phase interleaved DC-DC converter.It is based on a SEPIC-Cuk combination.The developed prototype has been used in single-input multiple-ou...This paper analyses,simulates and verifies an experimental prototype of a four-phase interleaved DC-DC converter.It is based on a SEPIC-Cuk combination.The developed prototype has been used in single-input multiple-output(SIMO)applications.This combined converter allows obtaining dual output voltages of the same value,from a single input DC voltage and with only a power switch.Multiphase interleaved DC-DC converters achieve a better dynamic response and low ripple,maintaining their efficiency.Each converter is connected in parallel,thereby managing their losses by distributing them between more components,which facilitates the thermal management of the multiphase converter and allows handling high power values in small sizes with respect to solutions for a single phase.Two control strategies were applied:synchronous operation mode(SOM)and interleaved operation mode(IOM).The simulation results allow the comparison of both operational modes,verifying that the IOM presents advantages with respect to the ripple at the input and output currents.The experimental prototype was designed for a distributed power architecture and bipolar DC microgrid(MG).展开更多
基金funded by the Danmarks Frie Forskningsfond(1134-00010B)Villum Fonden(Award in Technical and Natural Sciences 2019 and Grant No.37372)Y.Deng would like to acknowledge the support from the China Scholarship Council(Grant No.202108330079).
文摘Optical metasurfaces,comprising subwavelength quasi-planar nanostructures,constitute a universal platform for manipulating the amplitude,phase,and polarization of light,thus paving a way for the next generation of highly integrated multifunctional optical devices.In this work,we introduce a reflective metasurface for the generation of a complete(angularly resolved)polarization set by randomly interleaving anisotropic plasmonic meta-atoms acting as nanoscale wave plates.In the proof-of-concept demonstration,we achieve multidirectional beam-steering into different polarization channels forming a complete set of polarization states,which can also be dynamically altered by switching the spin of incident light.The developed design concept represents a significant advancement in achieving flat polarization optics with advanced functionalities.
文摘This work focuses on the fuzzy controller for the proposed three-phase interleaved Step-up converter(ISC).The fuzzy controller for the proposed ISC converters for electric vehicles has been discussed in detail.The proposed ISC direct current(DC-DC)converter could also be used in automobiles,satellites,industries,and propulsion.To enhance voltage gain,the proposed ISC Converter combines boost converter and interleaved converter(IC).This design also reduces the number of switches.As a result,ISC converter switching losses are reduced.The proposed ISC Converter topology can produce a 143 V output voltage and 1 kW of power.Due to the high voltage gain of this converter design,it is suitable for medium and high-power systems.The proposed ISC Converter topology is simulated in MATLAB/Simulink.The simulated output displays a high output voltage.But the output voltage contains maximum ripples.Fuzzy proposes an ISC Converter which makes closed loop responsiveness and reduces the output voltage ripple.The proposed ISC converter has the lowest ripple output voltage,which is less than 2%,because the duty cycle is regulated using the fuzzy logic controller.It offers high voltage gain,minimal ripple,and low switching loss.The performance of the proposed converter is compared to that of the fuzzy and Pro-portional Integral(PI)controllers implemented in MATLAB.
文摘The generation of electricity based on renewable energy sources,parti-cularly Photovoltaic(PV)system has been greatly increased and it is simply insti-gated for both domestic and commercial uses.The power generated from the PV system is erratic and hence there is a need for an efficient converter to perform the extraction of maximum power.An improved interleaved Single-ended Primary Inductor-Converter(SEPIC)converter is employed in proposed work to extricate most of power from renewable source.This proposed converter minimizes ripples,reduces electromagnetic interference due tofilter elements and the contin-uous input current improves the power output of PV panel.A Crow Search Algo-rithm(CSA)based Proportional Integral(PI)controller is utilized for controlling the converter switches effectively by optimizing the parameters of PI controller.The optimized PI controller reduces ripples present in Direct Current(DC)vol-tage,maintains constant voltage at proposed converter output and reduces over-shoots with minimum settling and rise time.This voltage is given to single phase grid via 1�Voltage Source Inverter(VSI).The command pulses of 1�VSI are produced by simple PI controller.The response of the proposed converter is thus improved with less input current.After implementing CSA based PI the efficiency of proposed converter obtained is 96%and the Total Harmonic Distor-tion(THD)is found to be 2:4%.The dynamics and closed loop operation is designed and modeled using MATLAB Simulink tool and its behavior is performed.
基金supported by the National Key Research and Development Program of China (2018YFB0904101)Science and Technology Project of State Grid (SG SGHB0000KXJS1800685)
文摘Design method of split planar resonant inductor in 1 kV SiC logical link control(LLC)converter is proposed,which ensures the converter power density of 93.59 W/in^3 and peak efficiency of 95.73%.Split resonant inductor helps to provide symmetrical resonant current by symmetrical impedance,and improves the distortion of resonant current,which ensures the efficiency of the whole converter.An interleaved winding connecting scheme improves the power density of the planar magnets,which contributes to power density improvement.Design method and calculation process of such split planar resonant inductor are provided.To verify the feasibility of the proposed design method,a 1 kV/48 V 6.6 kW,210 k Hz SiC LLC prototype was built,and the experimental results are given.
文摘For communication systems with heavy burst noise, an optimal Forward Error Correction(FEC) scheme is expected to have a large burst error correction capability while simultaneously owning moderate random error correction capability. This letter presents a new FEC scheme based on multiple-symbol interleaved Reed-Solomon codes and an associated two-pass decoding algorithm. It is shown that the proposed multi-symbol interleaved Reed-Solomon scheme can achieve nearly twice as much as the burst error correction capability of conventional single-symbol interleaved Reed-Solomon codes with the same code length and code rate.
文摘Parallel converter can significantly increase the capacity of the converter and improve the power quality of AC side, but the circulation which can lead to high switching loss and even damage the devices will easily exist in the direct parallel converters. In this paper, the average model of parallel interleaved inverters system to analyze the circulation current is shown, and the cross current is relevant to DC-bus voltage and the overlap time of zero vectors in the switching period. Based on this observation, a discontinuous space vector modulation without using zero vectors (000) is eliminate and suppress the zero-sequence current to entire system. Finally, the effectiveness of modulation strategy is verified by the simulations in this paper.
基金Supported by the Heilongjiang Provincial Key Research and Development Program Guidance Project(GZ20210103)。
文摘Taking Jiuhong Modern Agriculture Demonstration Park of Heilongjiang Province as the base for rice disease image acquisition,a total of 841 images of the four different diseases,including rice blast,stripe leaf blight,red blight and bacterial brown spot,were obtained.In this study,an interleaved attention neural network(IANN)was proposed to realize the recognition of rice disease images and an interleaved group convolutions(IGC)network was introduced to reduce the number of convolutional parameters,which realized the information interaction between channels.Based on the convolutional block attention module(CBAM),attention was paid to the features of results of the primary group convolution in the cross-group convolution to improve the classification performance of the deep learning model.The results showed that the classification accuracy of IANN was 96.14%,which was 4.72%higher than that of the classical convolutional neural network(CNN).This study showed a new idea for the efficient training of neural networks in the case of small samples and provided a reference for the image recognition and diagnosis of rice and other crop diseases.
文摘In this paper, we propose the receiver structure for Multiple Input Multiple Output (MIMO) Interleaved Single Carrier-Frequency Division Multiple Access (SC-FDMA) where the Frequency Domain Equalization (FDE) is firstly done for obtaining the tentative decision results and secondly using them the Inter-Symbol Interference (ISI) is cancelled by ISI canceller and then the Maximum Likelihood Detection (MLD) is used for separating the spatially multiplexed signals. Furthermore the output from MLD is fed back to ISI canceller repeatedly. In order to reduce the complexity, we replace the MLD by QR Decomposition with M-Algorithm (QRD-M) or Sphere Decoding (SD). Moreover, we add the soft output function to SD using Repeated Tree Search (RTS) algorithm to generate soft replica for ISI cancellation. We also refer to the Single Tree Search (STS) algorithm to further reduce the complexity of RTS. By examining the BER characteristics and the complexity reduction through computer simulations, we have verified the effectiveness of proposed receiver structure.
文摘Interfacing DC sources to load/power grid requires DC converters that produce minimum level of current ripples. This is to limit the losses and hence increase the life span of these sources. This article proposes a simple inter-leaved boost converter that interfaces PhotoVoltaic (PV) module into a common DC-link. The article also addresses the faulty mode operation of the proposed circuit while advising the appropriate remedy actions. A MATLAB and Simulink dynamic platform are used to simulate the transient performance of the proposed converter. The results revealed the effectiveness and the viability of the proposed converter in reducing the ripples in the PV current without employing bulky input inductors or increasing the switching frequency.
文摘Today, energy saving is one of the main objectives for engineers. In the case of mobile applications, energy can be saved by two different ways： decreasing the total masse of the system and increasing the efficiency of the overall system. This paper presents two optimization strategies to design a predefined multichannel structure of a boost converter which is dedicated to a solar airplane and used to interface PV panels and the battery system. The first strategy is a multi-criterion method that is able to trace the dependency between the converter＇s efficiency and its power density through the intermediary of the Pareto front. The second method, a mono-criterion approach, maximizes efficiency while respecting the constraint imposed on power density. The mono-criterion method that is applied to maximizing the European efficiency criterion showed that an increase in the number of channels enhanced the quantity of energy collected over a day by increasing the power density of the converter. At the end of the paper, the optimal design calculated was built to give an example of the result obtained by this design methodology. The results of the efficiency measurements made on a realized prototype are presented in this paper.
文摘This paper proposes the design and experimentation of digital control of soft-switched interleaved boost converter using FPGA for Telecommunication System. The switching devices in the proposed converter are turned on and off with Zero Voltage Switching (ZVS) and Zero Current Switching (ZCS) respectively. The circuit is operated in Continuous Conduction Mode (CCM) with various load ranges having duty cycle of more than 50%. The proposed converter is studied by developing the simulation module in MATLAB/SIMULINK. A PI controller is designed and implemented in FPGA to obtain a regulated DC output for line and load variations. Simulation and experimentation results are verified with a prototype development of the proposed converter. The results indicate that the converter performance is enhanced with closed loop control.
基金supported in main part by the General Project of National Natural Science Foundation of China under Grant 61671194in part by the General Scientific Research Projects of Zhejiang Education Department under Grant Y201840464.
文摘In the application of long series batteries,there is always the phenomenon that multiple cells in a pack are unbalanced simultaneously.In view of this situation,a modevarying cell equalizer topology based on interleaved parallel multiple transformers is proposed in this paper.Every unit in this equalizer can freely switch between LLC resonance mode and 3-state LC quasi-resonance mode.The boosting effect of LLC structure is used to reduce the number of transformer’s total turns.When multiple equalizer units need to work in LLC mode simultaneously,interleaved parallel technology is used to limit secondary side equalization current ripple for long-term protection of battery life.A prototype was designed and built to validate the effect of a closed loop LLC mode control algorithm with a state-of-charge(SOC)based equalization scheme selection strategy.Experimental results including up to 88.52%efficiency in LLC mode with 90.7%efficiency in 3-state LC mode,and minute level balancing time show the proposed topology demonstrates excellent balancing performance.
基金Supported by the National Natural Science Foundation ofChina (60573053 , 60603012)the Specialized Research Fund for the Doctoral Program of Higher Education of China (20050512002)
文摘Let S be a family of binary sequences constructed from interleaved construction. The linear spans of binary sequences in S are studied in this paper. In order to achieve the largest linear span, a criterion is presented for the base sequences with periodp, where p is a prime and 2 is a primitive root modulop2. It is shown that any sequence in S has the largest linear span under the criterion. Moreover, such base sequences can be chosen easily.
文摘This paper presents a solar-powered interleaved high-gain boost converter(IHGBC)that increases voltage gain with fewer ripples in the output voltage in comparison to existing DC-DC converters.The goal of this research is to develop a hybrid-based maximum power point tracking(MPPT)approach with the combination of a flower pollination(FP)algorithm assisted with a perturb&observe(P&O)MPPT approach for solar photovoltaic(SPV)systems integrated with IHGBC.To ensure effective usage of both FP and P&O algorithms,this study incorporates and validates the hybrid-based MPPT approach.The proposed solar-powered IHGBC with a hybrid-based MPPT algorithm has been computationally modelled and simulated using MATLAB®and Simulink®for both uniform and non-uniform irradiation and analysed for voltage gain,ripples in the output waveforms and convergence time.The proposed hybrid-based MPPT is based on a number of flowers that forecast the initial global peak,assisted by P&O in the last stage for faster convergence to attain the maximum power point(MPP).As a result,the hybrid-based MPPT approach alleviates the computational issues encountered in P&O and FP-based MPP approaches.The proposed hybrid MPPT is compared with conventional MPPT for SPV and the results show that the solar-powered IHGBC using a hybrid-based MPPT technique has negligible oscillations of 0.14%with a high-voltage gain of 7.992 and a fast convergence rate of 0.05 seconds compared to individual P&O-based MPPT and FP-based MPPT techniques.The simulation results of the proposed MPPT with IHGBC outperform the conventional MPPT with high-gain converters.
基金Supported by the National Natural Science Foundation of China(No.61601296,61701295)the Science and Technology Innovation ActionPlan Project of Shanghai Science and Technology Commission(No.20511103500)the Talent Program of Shanghai University of Engineer-ing Science(No.2018RC43)。
文摘An interference suppression design scheme based on conjugate weighted butterfly interleaving mapping(CWBIM)is proposed for inter-carrier interference(ICI)and inter-subband interference(IBI)in the received signals of universal filtered multi-carrier(UFMC)systems.It applies an interleaving mapping operation to subtract the interference coefficients of adjacent terms in ICI and IBI twice,thereby achieving suppression effects similar to the self-cancellation(SC)algorithm while maintaining the original data transmission efficiency.Meanwhile,conjugate and complex weighting operations can effectively suppress the impact of phase rotation errors in high-speed mobile channel environments,thereby further improving the bit error rate(BFR)performance of the system,Moreover,butterfly operation can effectively control the computational complexity of the interleaving mapping process.Theoretical analysis and simulation results show that,compared with the PSC-UFMC algorithm,the CWBIM-UFMC scheme proposed in this paper can effectively suppress ICI and IBI in the received signal without compromising data transmission efficiency and reducing computational complexity,thereby achieving good BER performance of the system.
文摘(f(x), m)-interleaved sequences over Fq have been proposed and studied. Roughly speaking, an (f(x), m)-interleaved sequence is a sequence which is made of (or say, interleaved by) m component sequences with a common characteristic polynomial (f(x)(∈Fq [x]). in this note, (7(x), m)-interleaved sequences are studied further. As a result, it is made clear how their minimal characteristic polynomials, linear spans and periods are determined by their component sequences. And also, their period distribution and the number of (f(x), m)-interleaved sequences with maximal linear spans are derived. Furthermore, a large number of interleaved sequences with the lowest correlation among ali the (f(x), m)-interleaved sequences are constructed.
基金supported by the Key grant Project of Chinese Ministry of Education(Grant No.311031)the Innovative Research Team of Sichuan Province(Grant No.2011JTD0007)+1 种基金National Natural Science Foundation of China(Grant No.91218301)the Ministry of Education of Humanities and Social Science Foundation of China(Grant No.11XJCZH002)
文摘Low correlation zone (LCZ) sequences are useful in quasi-synchronous code-division multiple access (QS-CDMA) communication systems. In this paper, a generic construction of LCZ sequences based on inter-leaved technique is investigated. Firstly, the shift sequence is shown to correspond to two-tuple balanced d-form function essentially, which results in new shift sequence. Secondly, an optimal design of p2-ary sequences over the integer residue class ring Zp2 is proposed, which improves the previous construction when p is an odd prime.
基金Project supported by the National Natural Science Foundation of China(Nos.61234002,61322405,61306044,61376033)the National High-Tech Program of China(No.2013AA014103)
文摘In a time-interleaved analog-to-digital converter （TI ADC）, several individual ADCs operate in parallel to achieve a higher sampling rate. Low power consumption as well as good linearity can be obtained by applying successive approximation register （SAR） converters as sub-channel ADCs. In spite of the advantages, this structure suffers from three mismatches, which are offset mismatch, gain mismatch, and time skew. This paper focuses on a TI SAR ADC with a number of channels. The mismatch effects in the frequency domain are analyzed and the derived close form formulas are verified based on Matlab. In addition, we clarify that the standard deviation of DNL and INL of an M-channel TI ADC is reduced by a factor of ~ compared to a single channel ADC. The formulas can be used to derive the corresponding requirements when designing a TI ADC. Our analysis process is able to inform the study of calibration algorithms.
基金European Commission(H2020 Quant ERA ERA-NET Cofund QT project CUSPIDOR,H2020-ICT27-2015 project 688516 COSMICC)Ministero dell’Istruzione,dell’Universitàe della Ricerca+1 种基金Science Foundation Ireland(17/QERA/3472,12/RC/2276_P2)CINECA-ISCRA(Project Slow Mod-HP10C0BQ66)。
文摘Reducing power dissipation in electro-optic modulators is a key step for widespread application of silicon photonics to optical communication.In this work,we design Mach–Zehnder modulators in the silicon-on-insulator platform,which make use of slow light in a waveguide grating and of a reverse-biased p-n junction with interleaved contacts along the waveguide axis.After optimizing the junction parameters,we discuss the full simulation of the modulator in order to find a proper trade-off among various figures of merit,such as modulation efficiency,insertion loss,cutoff frequency,optical modulation amplitude,and dissipated energy per bit.Comparison with conventional structures(with lateral p-n junction and/or in rib waveguides without slow light)highlights the importance of combining slow light with the interleaved p-n junction,thanks to the increased overlap between the travelling optical wave and the depletion regions.As a surprising result,the modulator performance is improved over an optical bandwidth that is much wider than the slow-light bandwidth.
文摘This paper analyses,simulates and verifies an experimental prototype of a four-phase interleaved DC-DC converter.It is based on a SEPIC-Cuk combination.The developed prototype has been used in single-input multiple-output(SIMO)applications.This combined converter allows obtaining dual output voltages of the same value,from a single input DC voltage and with only a power switch.Multiphase interleaved DC-DC converters achieve a better dynamic response and low ripple,maintaining their efficiency.Each converter is connected in parallel,thereby managing their losses by distributing them between more components,which facilitates the thermal management of the multiphase converter and allows handling high power values in small sizes with respect to solutions for a single phase.Two control strategies were applied:synchronous operation mode(SOM)and interleaved operation mode(IOM).The simulation results allow the comparison of both operational modes,verifying that the IOM presents advantages with respect to the ripple at the input and output currents.The experimental prototype was designed for a distributed power architecture and bipolar DC microgrid(MG).
