The coagulation process is a widely applied technology in water and wastewater treatment.Novel composite polyferric mag-nesium-silicate-sulfate(PFMS)coagulants were synthesized using Na_(2)SiO_(3)·9H_(2)O,Fe_(2)(...The coagulation process is a widely applied technology in water and wastewater treatment.Novel composite polyferric mag-nesium-silicate-sulfate(PFMS)coagulants were synthesized using Na_(2)SiO_(3)·9H_(2)O,Fe_(2)(SO_(4))_(3),and MgSO_(4) as raw materials in this paper.The effects of aging time,Fe:Si:Mg,and OH:M molar ratios(M represents the metal ions)on the coagulation performance of the as-pre-pared PFMS were systematically investigated to obtain optimum coagulants.The results showed that PFMS coagulant exhibited good co-agulation properties in the treatment of simulated humic acid-kaolin surface water and reactive dye wastewater.When the molar ratio was controlled at Fe:Si:Mg=2:2:1 and OH:M=0.32,the obtained PFMS presented excellent stability and a high coagulation efficiency.The removal efficiency of ultraviolet UV254 was 99.81%,and the residual turbidity of the surface water reached 0.56 NTU at a dosage of 30 mg·L^(-1).After standing the coagulant for 120 d in the laboratory,the removal efficiency of UV254 and residual turbidity of the surface wa-ter were 88.12%and 0.68 NTU,respectively,which accord with the surface water treatment requirements.In addition,the coagulation performance in the treatment of reactive dye wastewater was greatly improved by combining the advantages of magnesium and iron salts.Compared with polyferric silicate-sulfate(PFS)and polymagnesium silicate-sulfate(PMS),the PFMS coagulant played a better decolor-ization role within the pH range of 7-13.展开更多
Developing technologies that can be applied simultaneously in battery thermal management(BTM)and thermal runaway(TR)mitigation is significant to improving the safety of lithium-ion battery systems.Inorganic phase chan...Developing technologies that can be applied simultaneously in battery thermal management(BTM)and thermal runaway(TR)mitigation is significant to improving the safety of lithium-ion battery systems.Inorganic phase change material(PCM)with nonflammability has the potential to achieve this dual function.This study proposed an encapsulated inorganic phase change material(EPCM)with a heat transfer enhancement for battery systems,where Na_(2)HPO_(4)·12H_(2)O was used as the core PCM encapsulated by silica and the additive of carbon nanotube(CNT)was applied to enhance the thermal conductivity.The microstructure and thermal properties of the EPCM/CNT were analyzed by a series of characterization tests.Two different incorporating methods of CNT were compared and the proper CNT adding amount was also studied.After preparation,the battery thermal management performance and TR propagation mitigation effects of EPCM/CNT were further investigated on the battery modules.The experimental results of thermal management tests showed that EPCM/CNT not only slowed down the temperature rising of the module but also improved the temperature uniformity during normal operation.The peak battery temperature decreased from 76℃to 61.2℃at 2 C discharge rate and the temperature difference was controlled below 3℃.Moreover,the results of TR propagation tests demonstrated that nonflammable EPCM/CNT with good heat absorption could work as a TR barrier,which exhibited effective mitigation on TR and TR propagation.The trigger time of three cells was successfully delayed by 129,474 and 551 s,respectively and the propagation intervals were greatly extended as well.展开更多
Solid-state electrolytes(SSEs)are widely considered the essential components for upcoming rechargeable lithium-ion batteries owing to the potential for great safety and energy density.Among them,polymer solid-state el...Solid-state electrolytes(SSEs)are widely considered the essential components for upcoming rechargeable lithium-ion batteries owing to the potential for great safety and energy density.Among them,polymer solid-state electrolytes(PSEs)are competitive candidates for replacing commercial liquid electrolytes due to their flexibility,shape versatility and easy machinability.Despite the rapid development of PSEs,their practical application still faces obstacles including poor ionic conductivity,narrow electrochemical stable window and inferior mechanical strength.Polymer/inorganic composite electrolytes(PIEs)formed by adding ceramic fillers in PSEs merge the benefits of PSEs and inorganic solid-state electrolytes(ISEs),exhibiting appreciable comprehensive properties due to the abundant interfaces with unique characteristics.Some PIEs are highly compatible with high-voltage cathode and lithium metal anode,which offer desirable access to obtaining lithium metal batteries with high energy density.This review elucidates the current issues and recent advances in PIEs.The performance of PIEs was remarkably influenced by the characteristics of the fillers including type,content,morphology,arrangement and surface groups.We focus on the molecular interaction between different components in the composite environment for designing high-performance PIEs.Finally,the obstacles and opportunities for creating high-performance PIEs are outlined.This review aims to provide some theoretical guidance and direction for the development of PIEs.展开更多
Water can be used as oxidant in conjunction with metal particles to form metal-water propellant to increase the energy of propellant.For this application,water needs to be stored in form of solid and capable of becomi...Water can be used as oxidant in conjunction with metal particles to form metal-water propellant to increase the energy of propellant.For this application,water needs to be stored in form of solid and capable of becoming liquid when use.Stable and thixotropic hydrogel has good potential as water-retaining material and oxidant of metal-based propellant.In this study,we prepared organic/inorganic composite hydrogels by combining inorganic gellants hectorite and fumed silica with organic gellant agarose,respectively.The total content of the gellants can be reduced to less than 2%by adding agarose.The influence of agarose on water content,phase transition temperature,centrifugal stability and other basic physical properties of composite hydrogels were discussed.The results show that the composite hydrogels have better thixotropy and stability than pure inorganic hydrogels,and the gel-sol transformation can be realized by applying shear force or heating to the phase transition temperature.The composite hydrogels have good shear thinning ability and improved mechanical stability.Fumed silica/agarose hydrogels have better physical stability,while the thixotropy and shear thinning ability of hectorite/agarose hydrogels are better.展开更多
Metal halide perovskites have generated significant attention in recent years because of their extraordinary physical properties and photovoltaic performance.Among these,inorganic perovskite quantum dots(QDs)stand out...Metal halide perovskites have generated significant attention in recent years because of their extraordinary physical properties and photovoltaic performance.Among these,inorganic perovskite quantum dots(QDs)stand out for their prominent merits,such as quantum confinement effects,high photoluminescence quantum yield,and defect-tolerant structures.Additionally,ligand engineering and an all-inorganic composition lead to a robust platform for ambient-stable QD devices.This review presents the state-of-the-art research progress on inorganic perovskite QDs,emphasizing their electronic applications.In detail,the physical properties of inorganic perovskite QDs will be introduced first,followed by a discussion of synthesis methods and growth control.Afterwards,the emerging applications of inorganic perovskite QDs in electronics,including transistors and memories,will be presented.Finally,this review will provide an outlook on potential strategies for advancing inorganic perovskite QD technologies.展开更多
For the further improvement of the power conversion efficiency(PCE)and stability of perovskite solar cells(PSCs),the buried interface between the perovskite and the electron transport layer is crucial.However,it is ch...For the further improvement of the power conversion efficiency(PCE)and stability of perovskite solar cells(PSCs),the buried interface between the perovskite and the electron transport layer is crucial.However,it is challenging to effectively optimize this interface as it is buried beneath the perovskite film.Herein,we have designed and synthesized a series of multifunctional organic-inorganic(OI)complexes as buried interfacial material to promote electron extraction,as well as the crystal growth of the perovskite.The OI complex with BF4−group not only eliminates oxygen vacancies on the SnO_(2) surface but also balances energy level alignment between SnO_(2) and perovskite,providing a favorable environment for charge carrier extraction.Moreover,OI complex with amine(−NH_(2))functional group can regulate the crystallization of the perovskite film via interaction with PbI2,resulting in highly crystallized perovskite film with large grains and low defect density.Consequently,with rational molecular design,the PSCs with optimal OI complex buried interface layer which contains both BF4−and−NH_(2) functional groups yield a champion device efficiency of 23.69%.More importantly,the resulting unencapsulated device performs excellent ambient stability,maintaining over 90%of its initial efficiency after 2000 h storage,and excellent light stability of 91.5%remaining PCE in the maximum power point tracking measurement(under continuous 100 mW cm−2 light illumination in N2 atmosphere)after 500 h.展开更多
After fast developing of single-junction perovskite solar cells and organic solar cells in the past 10 years,it is becoming harder and harder to improve their power conversion efficiencies.Tandem solar cells are recei...After fast developing of single-junction perovskite solar cells and organic solar cells in the past 10 years,it is becoming harder and harder to improve their power conversion efficiencies.Tandem solar cells are receiving more and more attention because they have much higher theoretical efficiency than single-junction solar cells.Good device performance has been achieved for perovskite/silicon and perovskite/perovskite tandem solar cells,including 2-terminal and 4-terminal structures.However,very few studies have been done about 4-terminal inorganic perovskite/organic tandem solar cells.In this work,semi-transparent inorganic perovskite solar cells and organic solar cells are used to fabricate 4-terminal inorganic perovskite/organic tandem solar cells,achieving a power conversion efficiency of 21.25%for the tandem cells with spin-coated perovskite layer.By using drop-coating instead of spin-coating to make the inorganic perovskite films,4-terminal tandem cells with an efficiency of 22.34%are made.The efficiency is higher than the reported 2-terminal and 4-terminal inorganic perovskite/organic tandem solar cells.In addition,equivalent 2-terminal tandem solar cells were fabricated by connecting the sub-cells in series.The stability of organic solar cells under continuous illumination is improved by using semi-transparent perovskite solar cells as filter.展开更多
The high-density,vertically aligned retinal neuron array provides effective vision,a feature we aim to replicate with electronic devices.However,the conventional complementary metal-oxide-semiconductor(CMOS)image sens...The high-density,vertically aligned retinal neuron array provides effective vision,a feature we aim to replicate with electronic devices.However,the conventional complementary metal-oxide-semiconductor(CMOS)image sensor,based on separate designs for sensing,memory,and processing units,limits its integration density.Moreover,redundant signal communication significantly increases energy consumption.Current neuromorphic devices integrating sensing and signal processing show promise in various computer vision applications,but there is still a need for frame-based imaging with good compatibility.In this study,we developed a dual-mode image sensor based on a high-density all-inorganic perovskite nanowire array.The device can switch between frame-based standard imaging mode and neuromorphic imaging mode by applying different biases.This unique bias-dependent photo response is based on a well-designed energy band diagram.The biomimetic alignment of nanowires ensures the potential for high-resolution imaging.To further demonstrate the imaging ability,we conducted pattern reconstruction in both modes with a 10×10 crossbar device.This study introduces a novel image sensor with high compatibility and efficiency,suitable for various applications including computer vision,surveillance,and robotics.展开更多
All inorganic CsPbBr_(3) quantum dots(QDs)are regarded as excellent candidates for next-generation emitters due to their high photoluminescence quantum yield(PLQY)and defect tolerance.However,the poor stability and de...All inorganic CsPbBr_(3) quantum dots(QDs)are regarded as excellent candidates for next-generation emitters due to their high photoluminescence quantum yield(PLQY)and defect tolerance.However,the poor stability and degraded luminescent performance may impede their further commercialization because of the separation of conventional ligands from the QDs surfaces.Recently,Zang replaced the regular oleic acid with 2-hexyl-decanoic acid(DA),which possesses higher binding energy on the QDs surfaces,to act as ligands of QDs,exhibiting PLQY of 96%and excellent stabilities against ethanol and water.WLEDs with DA-modified CsPbBr_(3) QDs achieved improved thermal stability,a color rendering index of 93,a power efficiency of 64.8 lm/W and a properly correlated color temperature value of 3018 K,implying their prominent applications in solid-state lighting and displays.展开更多
Facing the poor environmental stability of traditional methylammonium or formamidinium-based lead halide per-ovskites,scientists turn their attention to inorganic lead hal-ide perovskites(ILHPs)with narrow bandgaps,ex...Facing the poor environmental stability of traditional methylammonium or formamidinium-based lead halide per-ovskites,scientists turn their attention to inorganic lead hal-ide perovskites(ILHPs)with narrow bandgaps,excellent thermal stability and reduced ion migration compared to their organic/inorganic counterparts[1−4].Up to now,the PCEs for ILHP solar cells exceed 21%[5].Especially,the preferred black ILHP(e.g.CsPbI3)with the smallest bandgap of~1.7 eV and single-halide composition for avoiding phase separation is crucial for high-performance single-junction solar cells and can be applied in tandem devices as the top cells[6,7].However,small Cs+(167 pm)in CsPbI3 with a tolerance factor close to 0.8 is unsuitable for the 3D PbI3-framework[8].The mis-matched size of cations will induce lattice strain and the per-ovskite spontaneously transforms to undesired non-photoact-ive yellow phase(δ-phase,like NH4CdCl3)(Fig.1(a))[9,10].There-fore,improving lattice symmetry and reducing lattice strain are the strategies for inhibiting the phase transition of ILHPs.展开更多
Polypyrrole(PPy)is wildly used as electrode material in supercapacitors due to its high conductivity,low cost,ease of handling,and ease of fabrication.However,limited capacitance and poor cycling stability hinder its ...Polypyrrole(PPy)is wildly used as electrode material in supercapacitors due to its high conductivity,low cost,ease of handling,and ease of fabrication.However,limited capacitance and poor cycling stability hinder its practical application.After developing carboxylated cellulose nanocrystals(CNC-COO^(-))as immobile dopants for PPy to improve its cycling stability,we investigated the effect of different commonly used salts(KCl,NaCl,KBr,and NaClO_(4))as dopants during electrode fabrication by electropolymerization.The film’s capacitance increased from 160.6 to 183.4 F g^(-1)after adding a combination of KCl and NaClO_(4) into the electrodeposition electrolyte.More importantly,the porous and interconnected PPy/CNC-COO^(-)-Cl-(Cl O_(4)^(-))_0.5 electrode film exhibited an excellent capacitance of 125.0 F g^(-1)(0.78 F cm^(-2))at a high current density of 2.0 Ag^(-1)(20 m A cm^(-2),allowing charging in less than 1 min),increasing almost 204%over PPy/CNC-COO-films.A symmetric PPy/CNC-COO^(-)-Cl-(ClO_(4)^(-))_0.5 supercapacitor retained its full capacitance after 5000 cycles,and displayed a high energy density of 5.2 Wh kg^(-1)at a power density of 25.4 W kg^(-1)(34.5μWh cm^(-2) at 1752.3μW cm^(-2)).These results reveal that the porous structure formed by doping with CNC-COO-and inorganic salts opens up more active reaction areas to store charges in PPy-based films as the stiff and ribbon-like CNC-COO-as permanent dopants improve the strength and stability of PPy-based films.Our demonstration provides a simple and practical way to deposit PPy based supercapacitors with high capacitance,fast charging,and excellent cycling stability.展开更多
Short Retraction Notice The paper does not meet the standards of "Advances in Bioscience and Biotechnology". This article has been retracted to straighten the academic record. In making this decision the Edi...Short Retraction Notice The paper does not meet the standards of "Advances in Bioscience and Biotechnology". This article has been retracted to straighten the academic record. In making this decision the Editorial Board follows COPE's Retraction Guidelines. The aim is to promote the circulation of scientific research by offering an ideal research publication platform with due consideration of internationally accepted standards on publication ethics. The Editorial Board would like to extend its sincere apologies for any inconvenience this retraction may have caused. Editor guiding this retraction: Prof. Abass Alavi (EiC of ABB). Please see the article page for more details. The full retraction notice in PDF is preceding the original paper which is marked "RETRACTED".展开更多
In this study,to better understand the reaction mechanism between inorganic salts and nitrocellulose,CaCO_(3) and Li_(2)CO_(3) were evaluated with respect to their effects on the thermal degradation of NC in nitrogen ...In this study,to better understand the reaction mechanism between inorganic salts and nitrocellulose,CaCO_(3) and Li_(2)CO_(3) were evaluated with respect to their effects on the thermal degradation of NC in nitrogen atmosphere using TG/DSC at three different heating rates(2,5,10 K/min).The numerical relationship between activation energy(E)and conversion rate was obtained by FWO and KAS method,and it was discovered that CaCO_(3) could improve the thermal stability of NC.Activation energy values were calculated by Kissinger method,and it was found that NC that contain Li2CO3had the highest activation energy while NC containing CaCO3had the lowest E value.By combining the thermal analysis data with Malek method,the most probable mechanism model of thermal degradation is obtained as Sesták-Berggren model,which expression is f(α)=α^(m)(1-α)^(n).As a result of this study,there are certain guiding principles that can be applied to the pyrolysis reaction model and to the actual production process of nitrocellulose.展开更多
To solve the fire accidents caused by coal combustion,this work prepared four hybrid hydrogel materials using bio-based polymers,flame retardants,and inorganic materials.Compared to pure water and 3.5 wt%MgCl_(2)solut...To solve the fire accidents caused by coal combustion,this work prepared four hybrid hydrogel materials using bio-based polymers,flame retardants,and inorganic materials.Compared to pure water and 3.5 wt%MgCl_(2)solution,the as-prepared hydrogel presents good fire prevention performance.In addition,it is found that CO and CO_(2)are not produced by coal when the pyrolysis temperature is lower than 200℃.During low-temperature pyrolysis,CO is more likely to be produced than CO_(2),indicating inadequate pyrolysis behavior.At the same time,the addition of fire-preventing hydrogel can not only decrease the maximum CO_(2)concentration before the critical temperature but also prolong the corresponding time.In addition,based on the cone calorimeter test,the inhibition effects of pure water,magnesium chloride solution,and four hybrid hydrogels on heat release behavior are evaluated.It is demonstrated that different dosages of different hydrogels affected the fire prevention effect.Phosphorous-modified cellulose/silica and carrageenan/DMMP/vermiculite composite hydrogels have the weakest fire prevention effect at 20 g,which is weaker than that of water.However,the fire prevention effect of carrageenan/DMMP/vermiculite composite hydrogels exceeded that of water at 40 and 60 g.Additionally,the fire prevention effect of the sodium alginate/sepiolite/ammonium polyphosphate composite hydrogel is most significant in common tests,attributed to the intumescent flame retardant system.展开更多
BACKGROUND Ulcerative colitis(UC)is a chronic gastrointestinal disorder characterized by inflammation and ulceration,representing a significant predisposition to colorectal cancer.Recent advances in single-cell RNA se...BACKGROUND Ulcerative colitis(UC)is a chronic gastrointestinal disorder characterized by inflammation and ulceration,representing a significant predisposition to colorectal cancer.Recent advances in single-cell RNA sequencing(scRNA-seq)technology offer a promising avenue for dissecting the complex cellular interactions and molecular signatures driving UC pathology.AIM To utilize scRNA-seq technology to dissect the complex cellular interactions and molecular signatures that underlie UC pathology.METHODS In this research,we integrated and analyzed the scRNA-seq data from UC patients.Moreover,we conducted mRNA and protein level assays as well as pathology-related staining tests on clinical patient samples.RESULTS In this study,we identified the sustained upregulation of inflammatory response pathways during UC progression,characterized the features of damaged endothelial cells in colitis.Furthermore,we uncovered the downregulation of phospholysine phosphohistidine inorganic pyrophosphate phosphatase(LHPP)has a negative correlation with signal transducer and activator of transcription 3.Significant downregulation of LHPP in UC patient tissues and plasma suggests that LHPP may serve as a potential therapeutic target for UC.This paper highlights the importance of LHPP as a potential key target in UC and unveils its potential role in inflammation regulation.CONCLUSION The findings suggest that LHPP may serve as a potential therapeutic target for UC,emphasizing its importance as a potential key target in UC and unveiling its role in inflammation regulation.展开更多
A five-component weighted average partial least squares(WA-PLS)calibration model was developed by analysing diatom assemblages in 34 surface sediment samples(collected in 2015)from the Changjiang River estuary(CRE)and...A five-component weighted average partial least squares(WA-PLS)calibration model was developed by analysing diatom assemblages in 34 surface sediment samples(collected in 2015)from the Changjiang River estuary(CRE)and its adjacent areas to infer dissolved inorganic nitrogen(DIN)concentrations.Eighteen additional sets of surface sediment diatoms and corresponding upper water DIN data(collected in 2012)were used to evaluate the accuracy of the model,and the relationship between observed and diatom-inferred DIN(DI-DIN)values(R2=0.85)illustrated the strong performance of the transfer function,indicating that precise reconstructions of former DIN are possible.The diatom-DIN transfer function was applied to the diatom record from a sediment core DH8-2(1962‒2012)collected in the Fujian-Zhejiang area south of the CRE.The reconstruction based on the DI-DIN model showed a significant DIN increase from 1962-2012,reflecting the influence of human activities on the very large increase in eutrophication.Three distinct periods can be seen from the changes in DIN and diatom taxa.In the 1962-1972 period,the DIN content was relatively low,with an average of 5.94μmol/L,and more than 80%of the diatom species identified were benthic taxa.In the 1972-2004 period,as the impact of human activities intensified,large nutrient inputs caused the DIN content to increase,with an average of 8.25μmol/L.The nutrient inputs also caused a significant change in the nutrient components and a distinct increase in small planktonic taxa.In the 2004-2012 period,the DIN content continued to rise,fluctuating at approximately 10μmol/L.A continuous increase in the frequency of planktonic taxa(up to 65.48%)indicated that eutrophication was further intensified,which was confirmed by the transformation from diatom-induced red tide to dinoflagellate-induced red tide during this period.展开更多
The practical application of Li metal anodes(LMAs)is limited by uncontrolled dendrite growth and side reactions.Herein,we propose a new friction-induced strategy to produce high-performance thin Li anode(Li@CFO).By vi...The practical application of Li metal anodes(LMAs)is limited by uncontrolled dendrite growth and side reactions.Herein,we propose a new friction-induced strategy to produce high-performance thin Li anode(Li@CFO).By virtue of the in situ friction reaction between fluoropolymer grease and Li strips during rolling,a robust organic/inorganic hybrid interlayer(lithiophilic LiF/LiC_(6)framework hybridized-CF_(2)-O-CF_(2)-chains)was formed atop Li metal.The derived interface contributes to reversible Li plating/stripping behaviors by mitigating side reactions and decreasing the solvation degree at the interface.The Li@CFO||Li@CFO symmetrical cell exhibits a remarkable lifespan for 5,600 h(1.0 mA cm^(-2)and 1.0 mAh cm^(-2))and 1,350 cycles even at a harsh condition(18.0 mA cm^(-2)and 3.0 mAh cm^(-2)).When paired with high-loading LiFePO4 cathodes,the full cell lasts over 450 cycles at 1C with a high-capacity retention of 99.9%.This work provides a new friction-induced strategy for producing high-performance thin LMAs.展开更多
Declining soil fertility is a major constraint to potato farming, the second most important food crop in Kenya. The objective of the study was to determine the effect of different rates of biochar and inorganic fertil...Declining soil fertility is a major constraint to potato farming, the second most important food crop in Kenya. The objective of the study was to determine the effect of different rates of biochar and inorganic fertilizer on some soil properties;soil pH, soil phosphomonoesterases, inorganic nitrogen and extractable phosphorus. The study was conducted for two seasons (short and long rains) at two locations (Egerton University agricultural field and farmer’s field in Mau Narok) using a split-plot design in a randomized complete block (RCBD) arrangement with variety as the main plot and soil amendments as the subplot. Biochar and Diammonium Phosphate (DAP) at 0, 5, and 10 t⋅ha<sup>−1</sup> and 0, 250, and 500 kg⋅ha<sup>−1</sup> respectively, were applied, resulting in nine treatment combinations. Two potato varieties (Shangi and Destiny) were used in the study. A combination of 5 t⋅ha<sup>−1</sup> biochar and 500 kg⋅ha<sup>−1</sup> DAP and sole application of biochar at 5 t⋅ha<sup>−1</sup> resulted in an increase of 1.25, 2.54 units in soil pH in two seasons, respectively. Similarly, a combination of 5 t⋅ha<sup>−1</sup> biochar and 250 kg⋅ha<sup>−1</sup> DAP increased soil available phosphorus by 105 units from 30.7 mg⋅kg<sup>−1</sup> to 136 mg⋅kg<sup>−1</sup>. The application rate of 5 t⋅ha<sup>−1</sup> biochar with 250 or 500 kg⋅ha<sup>−1</sup> DAP significantly increased soil nitrate by 102.11 and 116.14 units, respectively. Soils amended with biochar at 5 t⋅ha<sup>−1</sup> combined with 500 kg⋅ha<sup>−1</sup> DAP, 10 t⋅ha<sup>−1</sup> of biochar combined with either 250 kg or 500 kg of DAP gave the highest alkaline enzymes (mM pNP × kg<sup>−1</sup> × h<sup>−1</sup>). However, the highest acid soil phosphomonoesterases were obtained under the sole application of DAP at 500 ha<sup>−1</sup>. Thus, using biochar with chemical fertilizer seems a plausible option to ameliorate the declining nutrient base of farmland in Kenya, which could sustainably support potato growth.展开更多
The aims of this study were to determine the dose of inorganic fertilizer of NPK combined with organic fertilizer from CM(Cow Manure)to grow paddy Inpara 8 variety planted in a tidal soil.This experiment was done in a...The aims of this study were to determine the dose of inorganic fertilizer of NPK combined with organic fertilizer from CM(Cow Manure)to grow paddy Inpara 8 variety planted in a tidal soil.This experiment was done in a green house and conducted from July to December 2020.This pot experiment used factorial completely randomized design with two factors and three replications.The first factor was NPK which consisted of two kinds of NPK fertilizers which were urea 200 kg/ha,SP-36100 kg/ha,KCl 100 kg/ha from recommended fertilization and urea 37 kg/ha,SP-3656 kg/ha,KCl 183 kg/ha from calculation of the specific location soil analysis(in situ data).The second factor was dosage of CM at 5,7.5 and 10 tons/ha respectively.The results showed that NPK fertilization from specific location combined with CM at 10 tons/ha was the best treatment for rice production in an infertile tidal swampland producing 2.20 tons/ha.展开更多
基金supported by the National Natural Science Foundation of China (No.U1810205).
文摘The coagulation process is a widely applied technology in water and wastewater treatment.Novel composite polyferric mag-nesium-silicate-sulfate(PFMS)coagulants were synthesized using Na_(2)SiO_(3)·9H_(2)O,Fe_(2)(SO_(4))_(3),and MgSO_(4) as raw materials in this paper.The effects of aging time,Fe:Si:Mg,and OH:M molar ratios(M represents the metal ions)on the coagulation performance of the as-pre-pared PFMS were systematically investigated to obtain optimum coagulants.The results showed that PFMS coagulant exhibited good co-agulation properties in the treatment of simulated humic acid-kaolin surface water and reactive dye wastewater.When the molar ratio was controlled at Fe:Si:Mg=2:2:1 and OH:M=0.32,the obtained PFMS presented excellent stability and a high coagulation efficiency.The removal efficiency of ultraviolet UV254 was 99.81%,and the residual turbidity of the surface water reached 0.56 NTU at a dosage of 30 mg·L^(-1).After standing the coagulant for 120 d in the laboratory,the removal efficiency of UV254 and residual turbidity of the surface wa-ter were 88.12%and 0.68 NTU,respectively,which accord with the surface water treatment requirements.In addition,the coagulation performance in the treatment of reactive dye wastewater was greatly improved by combining the advantages of magnesium and iron salts.Compared with polyferric silicate-sulfate(PFS)and polymagnesium silicate-sulfate(PMS),the PFMS coagulant played a better decolor-ization role within the pH range of 7-13.
基金financially supported by the National Key Research and Development Program(Grant No.2022YFE0207400)the National Natural Science Foundation of China(Grant No.U22A20168 and 52174225)。
文摘Developing technologies that can be applied simultaneously in battery thermal management(BTM)and thermal runaway(TR)mitigation is significant to improving the safety of lithium-ion battery systems.Inorganic phase change material(PCM)with nonflammability has the potential to achieve this dual function.This study proposed an encapsulated inorganic phase change material(EPCM)with a heat transfer enhancement for battery systems,where Na_(2)HPO_(4)·12H_(2)O was used as the core PCM encapsulated by silica and the additive of carbon nanotube(CNT)was applied to enhance the thermal conductivity.The microstructure and thermal properties of the EPCM/CNT were analyzed by a series of characterization tests.Two different incorporating methods of CNT were compared and the proper CNT adding amount was also studied.After preparation,the battery thermal management performance and TR propagation mitigation effects of EPCM/CNT were further investigated on the battery modules.The experimental results of thermal management tests showed that EPCM/CNT not only slowed down the temperature rising of the module but also improved the temperature uniformity during normal operation.The peak battery temperature decreased from 76℃to 61.2℃at 2 C discharge rate and the temperature difference was controlled below 3℃.Moreover,the results of TR propagation tests demonstrated that nonflammable EPCM/CNT with good heat absorption could work as a TR barrier,which exhibited effective mitigation on TR and TR propagation.The trigger time of three cells was successfully delayed by 129,474 and 551 s,respectively and the propagation intervals were greatly extended as well.
基金the National Natural Science Foundation of China(Nos.22279070,U21A20170 and 22175106)the Ministry of Science and Technology of China(Nos.2019YFA0705703,2021YFB2501900 and 2019YFE0100200)+1 种基金the Tsinghua University Initiative Scientific Research Program(20223080001)the Tsinghua-Foshan Innovation Special Fund(2021THFS0216)。
文摘Solid-state electrolytes(SSEs)are widely considered the essential components for upcoming rechargeable lithium-ion batteries owing to the potential for great safety and energy density.Among them,polymer solid-state electrolytes(PSEs)are competitive candidates for replacing commercial liquid electrolytes due to their flexibility,shape versatility and easy machinability.Despite the rapid development of PSEs,their practical application still faces obstacles including poor ionic conductivity,narrow electrochemical stable window and inferior mechanical strength.Polymer/inorganic composite electrolytes(PIEs)formed by adding ceramic fillers in PSEs merge the benefits of PSEs and inorganic solid-state electrolytes(ISEs),exhibiting appreciable comprehensive properties due to the abundant interfaces with unique characteristics.Some PIEs are highly compatible with high-voltage cathode and lithium metal anode,which offer desirable access to obtaining lithium metal batteries with high energy density.This review elucidates the current issues and recent advances in PIEs.The performance of PIEs was remarkably influenced by the characteristics of the fillers including type,content,morphology,arrangement and surface groups.We focus on the molecular interaction between different components in the composite environment for designing high-performance PIEs.Finally,the obstacles and opportunities for creating high-performance PIEs are outlined.This review aims to provide some theoretical guidance and direction for the development of PIEs.
基金the Haihe Laboratory of Sustainable Chemical Transformations for financial support。
文摘Water can be used as oxidant in conjunction with metal particles to form metal-water propellant to increase the energy of propellant.For this application,water needs to be stored in form of solid and capable of becoming liquid when use.Stable and thixotropic hydrogel has good potential as water-retaining material and oxidant of metal-based propellant.In this study,we prepared organic/inorganic composite hydrogels by combining inorganic gellants hectorite and fumed silica with organic gellant agarose,respectively.The total content of the gellants can be reduced to less than 2%by adding agarose.The influence of agarose on water content,phase transition temperature,centrifugal stability and other basic physical properties of composite hydrogels were discussed.The results show that the composite hydrogels have better thixotropy and stability than pure inorganic hydrogels,and the gel-sol transformation can be realized by applying shear force or heating to the phase transition temperature.The composite hydrogels have good shear thinning ability and improved mechanical stability.Fumed silica/agarose hydrogels have better physical stability,while the thixotropy and shear thinning ability of hectorite/agarose hydrogels are better.
基金The authors thank the support from the Australian Research Council(DP190103316)UNSW SHARP Project(RG163043).
文摘Metal halide perovskites have generated significant attention in recent years because of their extraordinary physical properties and photovoltaic performance.Among these,inorganic perovskite quantum dots(QDs)stand out for their prominent merits,such as quantum confinement effects,high photoluminescence quantum yield,and defect-tolerant structures.Additionally,ligand engineering and an all-inorganic composition lead to a robust platform for ambient-stable QD devices.This review presents the state-of-the-art research progress on inorganic perovskite QDs,emphasizing their electronic applications.In detail,the physical properties of inorganic perovskite QDs will be introduced first,followed by a discussion of synthesis methods and growth control.Afterwards,the emerging applications of inorganic perovskite QDs in electronics,including transistors and memories,will be presented.Finally,this review will provide an outlook on potential strategies for advancing inorganic perovskite QD technologies.
基金The authors acknowledge the financial support from the Natural Science Foundation of China(Nos.21931002 and 22101123)the National Key Research and Development Program of China(2018YFB0704100)+4 种基金the Shenzhen Science and Technology Innovation Committee(no.JCYJ20200109140812302)the Leading talents of Guangdong province program(2016LJ06N507)the Guangdong Provincial Key Laboratory of Energy Materials for Electric Power(no.2018B030322001)the Guangdong Provincial Key Laboratory of Catalysis(no.2020B121201002)Outstanding Talents Training Fund in Shenzhen.
文摘For the further improvement of the power conversion efficiency(PCE)and stability of perovskite solar cells(PSCs),the buried interface between the perovskite and the electron transport layer is crucial.However,it is challenging to effectively optimize this interface as it is buried beneath the perovskite film.Herein,we have designed and synthesized a series of multifunctional organic-inorganic(OI)complexes as buried interfacial material to promote electron extraction,as well as the crystal growth of the perovskite.The OI complex with BF4−group not only eliminates oxygen vacancies on the SnO_(2) surface but also balances energy level alignment between SnO_(2) and perovskite,providing a favorable environment for charge carrier extraction.Moreover,OI complex with amine(−NH_(2))functional group can regulate the crystallization of the perovskite film via interaction with PbI2,resulting in highly crystallized perovskite film with large grains and low defect density.Consequently,with rational molecular design,the PSCs with optimal OI complex buried interface layer which contains both BF4−and−NH_(2) functional groups yield a champion device efficiency of 23.69%.More importantly,the resulting unencapsulated device performs excellent ambient stability,maintaining over 90%of its initial efficiency after 2000 h storage,and excellent light stability of 91.5%remaining PCE in the maximum power point tracking measurement(under continuous 100 mW cm−2 light illumination in N2 atmosphere)after 500 h.
基金We thank the National Key Research and Development Program of China(2022YFB3803300)the open research fund of Songshan Lake Materials Laboratory(2021SLABFK02)+1 种基金the National Natural Science Foundation of China(21961160720 and 52203217)the China Postdoctoral Science Foundation(2021M690805)for financial support.
文摘After fast developing of single-junction perovskite solar cells and organic solar cells in the past 10 years,it is becoming harder and harder to improve their power conversion efficiencies.Tandem solar cells are receiving more and more attention because they have much higher theoretical efficiency than single-junction solar cells.Good device performance has been achieved for perovskite/silicon and perovskite/perovskite tandem solar cells,including 2-terminal and 4-terminal structures.However,very few studies have been done about 4-terminal inorganic perovskite/organic tandem solar cells.In this work,semi-transparent inorganic perovskite solar cells and organic solar cells are used to fabricate 4-terminal inorganic perovskite/organic tandem solar cells,achieving a power conversion efficiency of 21.25%for the tandem cells with spin-coated perovskite layer.By using drop-coating instead of spin-coating to make the inorganic perovskite films,4-terminal tandem cells with an efficiency of 22.34%are made.The efficiency is higher than the reported 2-terminal and 4-terminal inorganic perovskite/organic tandem solar cells.In addition,equivalent 2-terminal tandem solar cells were fabricated by connecting the sub-cells in series.The stability of organic solar cells under continuous illumination is improved by using semi-transparent perovskite solar cells as filter.
基金supported by the Science and Technology Plan of Shenzhen(JCYJ20170818114107730,JCYJ20180306174923335)The General Research Fund(projects 16205321,16214619)from the Hong Kong Research Grant Council,Innovation Technology Fund(GHP/014/19SZ)+2 种基金Guangdong-Hong Kong-Macao Intelligent Micro-Nano Optoelectronic Technology Joint Laboratory(2020B1212030010)Foshan Innovative and Entrepreneurial Research Team Program(2018IT100031)the support from the Center for 1D/2D Quantum Materials and the State Key Laboratory of Advanced Displays and Optoelectronics Technologies at HKUST。
文摘The high-density,vertically aligned retinal neuron array provides effective vision,a feature we aim to replicate with electronic devices.However,the conventional complementary metal-oxide-semiconductor(CMOS)image sensor,based on separate designs for sensing,memory,and processing units,limits its integration density.Moreover,redundant signal communication significantly increases energy consumption.Current neuromorphic devices integrating sensing and signal processing show promise in various computer vision applications,but there is still a need for frame-based imaging with good compatibility.In this study,we developed a dual-mode image sensor based on a high-density all-inorganic perovskite nanowire array.The device can switch between frame-based standard imaging mode and neuromorphic imaging mode by applying different biases.This unique bias-dependent photo response is based on a well-designed energy band diagram.The biomimetic alignment of nanowires ensures the potential for high-resolution imaging.To further demonstrate the imaging ability,we conducted pattern reconstruction in both modes with a 10×10 crossbar device.This study introduces a novel image sensor with high compatibility and efficiency,suitable for various applications including computer vision,surveillance,and robotics.
基金The author acknowledges the financial support by the City University of Hong Kong(9380107 and 7005943).
文摘All inorganic CsPbBr_(3) quantum dots(QDs)are regarded as excellent candidates for next-generation emitters due to their high photoluminescence quantum yield(PLQY)and defect tolerance.However,the poor stability and degraded luminescent performance may impede their further commercialization because of the separation of conventional ligands from the QDs surfaces.Recently,Zang replaced the regular oleic acid with 2-hexyl-decanoic acid(DA),which possesses higher binding energy on the QDs surfaces,to act as ligands of QDs,exhibiting PLQY of 96%and excellent stabilities against ethanol and water.WLEDs with DA-modified CsPbBr_(3) QDs achieved improved thermal stability,a color rendering index of 93,a power efficiency of 64.8 lm/W and a properly correlated color temperature value of 3018 K,implying their prominent applications in solid-state lighting and displays.
基金supported by the National Natural Science Foundation of China(62004058,U21A2076,21701041,52071048)Natural Science Foundation of Hebei Province(F2020202022)+6 种基金the Open Fund of the State Key Laboratory of Integrated Optoelectronics(IOSKL2020KF09)State Key Laboratory of Reliability and Intelligence of Electrical Equipment(EERI-PI20200005)the Support Plan for Overseas Students to Return to China for Entrepreneurship and Innovation(cx2020003)the Fundamental Research Funds for the Central Universities(2020CDJ-LHZZ-074)Natural Science Foundation of Chongqing(cstc2020jcyj-msxmX0629).L.Ding thanks the National Key Research and Development Program of China(2022YFB3803300)the open research fund of Songshan Lake Materials Laboratory(2021SLABFK02)the National Natural Science Foundation of China(21961160720).
文摘Facing the poor environmental stability of traditional methylammonium or formamidinium-based lead halide per-ovskites,scientists turn their attention to inorganic lead hal-ide perovskites(ILHPs)with narrow bandgaps,excellent thermal stability and reduced ion migration compared to their organic/inorganic counterparts[1−4].Up to now,the PCEs for ILHP solar cells exceed 21%[5].Especially,the preferred black ILHP(e.g.CsPbI3)with the smallest bandgap of~1.7 eV and single-halide composition for avoiding phase separation is crucial for high-performance single-junction solar cells and can be applied in tandem devices as the top cells[6,7].However,small Cs+(167 pm)in CsPbI3 with a tolerance factor close to 0.8 is unsuitable for the 3D PbI3-framework[8].The mis-matched size of cations will induce lattice strain and the per-ovskite spontaneously transforms to undesired non-photoact-ive yellow phase(δ-phase,like NH4CdCl3)(Fig.1(a))[9,10].There-fore,improving lattice symmetry and reducing lattice strain are the strategies for inhibiting the phase transition of ILHPs.
基金supported by the Research Foundation Flanders(grant 3E181170)supported by the China Scholarship Council(CSC,201806220066)。
文摘Polypyrrole(PPy)is wildly used as electrode material in supercapacitors due to its high conductivity,low cost,ease of handling,and ease of fabrication.However,limited capacitance and poor cycling stability hinder its practical application.After developing carboxylated cellulose nanocrystals(CNC-COO^(-))as immobile dopants for PPy to improve its cycling stability,we investigated the effect of different commonly used salts(KCl,NaCl,KBr,and NaClO_(4))as dopants during electrode fabrication by electropolymerization.The film’s capacitance increased from 160.6 to 183.4 F g^(-1)after adding a combination of KCl and NaClO_(4) into the electrodeposition electrolyte.More importantly,the porous and interconnected PPy/CNC-COO^(-)-Cl-(Cl O_(4)^(-))_0.5 electrode film exhibited an excellent capacitance of 125.0 F g^(-1)(0.78 F cm^(-2))at a high current density of 2.0 Ag^(-1)(20 m A cm^(-2),allowing charging in less than 1 min),increasing almost 204%over PPy/CNC-COO-films.A symmetric PPy/CNC-COO^(-)-Cl-(ClO_(4)^(-))_0.5 supercapacitor retained its full capacitance after 5000 cycles,and displayed a high energy density of 5.2 Wh kg^(-1)at a power density of 25.4 W kg^(-1)(34.5μWh cm^(-2) at 1752.3μW cm^(-2)).These results reveal that the porous structure formed by doping with CNC-COO-and inorganic salts opens up more active reaction areas to store charges in PPy-based films as the stiff and ribbon-like CNC-COO-as permanent dopants improve the strength and stability of PPy-based films.Our demonstration provides a simple and practical way to deposit PPy based supercapacitors with high capacitance,fast charging,and excellent cycling stability.
文摘Short Retraction Notice The paper does not meet the standards of "Advances in Bioscience and Biotechnology". This article has been retracted to straighten the academic record. In making this decision the Editorial Board follows COPE's Retraction Guidelines. The aim is to promote the circulation of scientific research by offering an ideal research publication platform with due consideration of internationally accepted standards on publication ethics. The Editorial Board would like to extend its sincere apologies for any inconvenience this retraction may have caused. Editor guiding this retraction: Prof. Abass Alavi (EiC of ABB). Please see the article page for more details. The full retraction notice in PDF is preceding the original paper which is marked "RETRACTED".
基金the National Natural Science Foundation of China(NSFC,Grants No.52176114 and 52111530091)Jiangsu Funding Program for Excellent Postdoctoral Talent。
文摘In this study,to better understand the reaction mechanism between inorganic salts and nitrocellulose,CaCO_(3) and Li_(2)CO_(3) were evaluated with respect to their effects on the thermal degradation of NC in nitrogen atmosphere using TG/DSC at three different heating rates(2,5,10 K/min).The numerical relationship between activation energy(E)and conversion rate was obtained by FWO and KAS method,and it was discovered that CaCO_(3) could improve the thermal stability of NC.Activation energy values were calculated by Kissinger method,and it was found that NC that contain Li2CO3had the highest activation energy while NC containing CaCO3had the lowest E value.By combining the thermal analysis data with Malek method,the most probable mechanism model of thermal degradation is obtained as Sesták-Berggren model,which expression is f(α)=α^(m)(1-α)^(n).As a result of this study,there are certain guiding principles that can be applied to the pyrolysis reaction model and to the actual production process of nitrocellulose.
基金the National Key Research and Development Program of China(Grant No.2017YFC0805900)the Fundamental Research Funds for the Central Universities(Grant No.WK2320000047)the USTC Research Funds of the Double First-Class Initiative(Grant No.YD2320002004).
文摘To solve the fire accidents caused by coal combustion,this work prepared four hybrid hydrogel materials using bio-based polymers,flame retardants,and inorganic materials.Compared to pure water and 3.5 wt%MgCl_(2)solution,the as-prepared hydrogel presents good fire prevention performance.In addition,it is found that CO and CO_(2)are not produced by coal when the pyrolysis temperature is lower than 200℃.During low-temperature pyrolysis,CO is more likely to be produced than CO_(2),indicating inadequate pyrolysis behavior.At the same time,the addition of fire-preventing hydrogel can not only decrease the maximum CO_(2)concentration before the critical temperature but also prolong the corresponding time.In addition,based on the cone calorimeter test,the inhibition effects of pure water,magnesium chloride solution,and four hybrid hydrogels on heat release behavior are evaluated.It is demonstrated that different dosages of different hydrogels affected the fire prevention effect.Phosphorous-modified cellulose/silica and carrageenan/DMMP/vermiculite composite hydrogels have the weakest fire prevention effect at 20 g,which is weaker than that of water.However,the fire prevention effect of carrageenan/DMMP/vermiculite composite hydrogels exceeded that of water at 40 and 60 g.Additionally,the fire prevention effect of the sodium alginate/sepiolite/ammonium polyphosphate composite hydrogel is most significant in common tests,attributed to the intumescent flame retardant system.
基金Science and Technology Programme of Traditional Chinese Medicine in Zhejiang Province,No.2023ZF114.
文摘BACKGROUND Ulcerative colitis(UC)is a chronic gastrointestinal disorder characterized by inflammation and ulceration,representing a significant predisposition to colorectal cancer.Recent advances in single-cell RNA sequencing(scRNA-seq)technology offer a promising avenue for dissecting the complex cellular interactions and molecular signatures driving UC pathology.AIM To utilize scRNA-seq technology to dissect the complex cellular interactions and molecular signatures that underlie UC pathology.METHODS In this research,we integrated and analyzed the scRNA-seq data from UC patients.Moreover,we conducted mRNA and protein level assays as well as pathology-related staining tests on clinical patient samples.RESULTS In this study,we identified the sustained upregulation of inflammatory response pathways during UC progression,characterized the features of damaged endothelial cells in colitis.Furthermore,we uncovered the downregulation of phospholysine phosphohistidine inorganic pyrophosphate phosphatase(LHPP)has a negative correlation with signal transducer and activator of transcription 3.Significant downregulation of LHPP in UC patient tissues and plasma suggests that LHPP may serve as a potential therapeutic target for UC.This paper highlights the importance of LHPP as a potential key target in UC and unveils its potential role in inflammation regulation.CONCLUSION The findings suggest that LHPP may serve as a potential therapeutic target for UC,emphasizing its importance as a potential key target in UC and unveiling its role in inflammation regulation.
基金Supported by the Taishan Scholars Climbing Program of Shandong Province of 2019,the National Natural Science Foundation of China(No.41806091)the National Natural Science Foundation of China(No.41506142)the PhD Start-up Fund of Shandong Jiaotong University(Nos.BS201902055,BS201902051)。
文摘A five-component weighted average partial least squares(WA-PLS)calibration model was developed by analysing diatom assemblages in 34 surface sediment samples(collected in 2015)from the Changjiang River estuary(CRE)and its adjacent areas to infer dissolved inorganic nitrogen(DIN)concentrations.Eighteen additional sets of surface sediment diatoms and corresponding upper water DIN data(collected in 2012)were used to evaluate the accuracy of the model,and the relationship between observed and diatom-inferred DIN(DI-DIN)values(R2=0.85)illustrated the strong performance of the transfer function,indicating that precise reconstructions of former DIN are possible.The diatom-DIN transfer function was applied to the diatom record from a sediment core DH8-2(1962‒2012)collected in the Fujian-Zhejiang area south of the CRE.The reconstruction based on the DI-DIN model showed a significant DIN increase from 1962-2012,reflecting the influence of human activities on the very large increase in eutrophication.Three distinct periods can be seen from the changes in DIN and diatom taxa.In the 1962-1972 period,the DIN content was relatively low,with an average of 5.94μmol/L,and more than 80%of the diatom species identified were benthic taxa.In the 1972-2004 period,as the impact of human activities intensified,large nutrient inputs caused the DIN content to increase,with an average of 8.25μmol/L.The nutrient inputs also caused a significant change in the nutrient components and a distinct increase in small planktonic taxa.In the 2004-2012 period,the DIN content continued to rise,fluctuating at approximately 10μmol/L.A continuous increase in the frequency of planktonic taxa(up to 65.48%)indicated that eutrophication was further intensified,which was confirmed by the transformation from diatom-induced red tide to dinoflagellate-induced red tide during this period.
基金This work was supported by the National Natural Science Foundation of China(U1904216 and U22A20141)the Natural Science Foundation of Changsha City(kq2208258).
文摘The practical application of Li metal anodes(LMAs)is limited by uncontrolled dendrite growth and side reactions.Herein,we propose a new friction-induced strategy to produce high-performance thin Li anode(Li@CFO).By virtue of the in situ friction reaction between fluoropolymer grease and Li strips during rolling,a robust organic/inorganic hybrid interlayer(lithiophilic LiF/LiC_(6)framework hybridized-CF_(2)-O-CF_(2)-chains)was formed atop Li metal.The derived interface contributes to reversible Li plating/stripping behaviors by mitigating side reactions and decreasing the solvation degree at the interface.The Li@CFO||Li@CFO symmetrical cell exhibits a remarkable lifespan for 5,600 h(1.0 mA cm^(-2)and 1.0 mAh cm^(-2))and 1,350 cycles even at a harsh condition(18.0 mA cm^(-2)and 3.0 mAh cm^(-2)).When paired with high-loading LiFePO4 cathodes,the full cell lasts over 450 cycles at 1C with a high-capacity retention of 99.9%.This work provides a new friction-induced strategy for producing high-performance thin LMAs.
文摘Declining soil fertility is a major constraint to potato farming, the second most important food crop in Kenya. The objective of the study was to determine the effect of different rates of biochar and inorganic fertilizer on some soil properties;soil pH, soil phosphomonoesterases, inorganic nitrogen and extractable phosphorus. The study was conducted for two seasons (short and long rains) at two locations (Egerton University agricultural field and farmer’s field in Mau Narok) using a split-plot design in a randomized complete block (RCBD) arrangement with variety as the main plot and soil amendments as the subplot. Biochar and Diammonium Phosphate (DAP) at 0, 5, and 10 t⋅ha<sup>−1</sup> and 0, 250, and 500 kg⋅ha<sup>−1</sup> respectively, were applied, resulting in nine treatment combinations. Two potato varieties (Shangi and Destiny) were used in the study. A combination of 5 t⋅ha<sup>−1</sup> biochar and 500 kg⋅ha<sup>−1</sup> DAP and sole application of biochar at 5 t⋅ha<sup>−1</sup> resulted in an increase of 1.25, 2.54 units in soil pH in two seasons, respectively. Similarly, a combination of 5 t⋅ha<sup>−1</sup> biochar and 250 kg⋅ha<sup>−1</sup> DAP increased soil available phosphorus by 105 units from 30.7 mg⋅kg<sup>−1</sup> to 136 mg⋅kg<sup>−1</sup>. The application rate of 5 t⋅ha<sup>−1</sup> biochar with 250 or 500 kg⋅ha<sup>−1</sup> DAP significantly increased soil nitrate by 102.11 and 116.14 units, respectively. Soils amended with biochar at 5 t⋅ha<sup>−1</sup> combined with 500 kg⋅ha<sup>−1</sup> DAP, 10 t⋅ha<sup>−1</sup> of biochar combined with either 250 kg or 500 kg of DAP gave the highest alkaline enzymes (mM pNP × kg<sup>−1</sup> × h<sup>−1</sup>). However, the highest acid soil phosphomonoesterases were obtained under the sole application of DAP at 500 ha<sup>−1</sup>. Thus, using biochar with chemical fertilizer seems a plausible option to ameliorate the declining nutrient base of farmland in Kenya, which could sustainably support potato growth.
文摘The aims of this study were to determine the dose of inorganic fertilizer of NPK combined with organic fertilizer from CM(Cow Manure)to grow paddy Inpara 8 variety planted in a tidal soil.This experiment was done in a green house and conducted from July to December 2020.This pot experiment used factorial completely randomized design with two factors and three replications.The first factor was NPK which consisted of two kinds of NPK fertilizers which were urea 200 kg/ha,SP-36100 kg/ha,KCl 100 kg/ha from recommended fertilization and urea 37 kg/ha,SP-3656 kg/ha,KCl 183 kg/ha from calculation of the specific location soil analysis(in situ data).The second factor was dosage of CM at 5,7.5 and 10 tons/ha respectively.The results showed that NPK fertilization from specific location combined with CM at 10 tons/ha was the best treatment for rice production in an infertile tidal swampland producing 2.20 tons/ha.
