Compared to a scalar pressure sensor, a vector sensor can provide a higher signal-to-noise ratio （SNR） signal and more detailed intbrmation on the sound field. Study on vector sensors and their applications have bec...Compared to a scalar pressure sensor, a vector sensor can provide a higher signal-to-noise ratio （SNR） signal and more detailed intbrmation on the sound field. Study on vector sensors and their applications have become a hot topic. Research on the representation of a vector field is highly relevant for extending the scope of vector sensor technology. This paper discusses the range-frequency distribution of the vector field due to a broadband acoustic source moving in a shallow-water waveguide as the self noise of a surface ship, and the vector extension of the waveguide impulse response measured over a limited frequency range using an active source of known waveform. From theory analysis and numerical simulation, the range-frequency representation of a vector field exhibits an interference structure qualitatively similar to that of the corresponding pressure field but, being quantitatively different, provides additional information on the waveguide, especially through the vertical component. For the range-frequency representation, physical quantities that can better exhibit the interference characteristics of the wavegaide are the products of pressure and particle velocity and of the pressure and pressure gradient. An image processing method to effectively detect and isolate the individual striations from an interference structure was reviewed briefly. The representation of the vector impulse response was discussed according to two different measurement systems, also known as particle velocity and pressure gradient. The vector impulse response representation can not only provide additional information from pressure only but even more than that of the range-frequency representation.展开更多
Large-scale topography, such as a seamount, substantially impacts low-frequency sound propagation in an ocean waveguide, limiting the application of low-frequency acoustic detecting techniques. A three-dimensional(3D)...Large-scale topography, such as a seamount, substantially impacts low-frequency sound propagation in an ocean waveguide, limiting the application of low-frequency acoustic detecting techniques. A three-dimensional(3D) coupledmode model is developed to calculate the acoustic field in an ocean waveguide with seamount topography and analyze the3D effect. In this model, a correction is introduced in the bottom boundary, theoretically making the acoustic field satisfy the energy conservation. Furthermore, a large azimuth angle calculation range is obtained by using the operator theory and higher-order Pade approximation. Additionally, the model has advantages related to the coupling mode and parabolic equation theory. The couplings corresponding to the effects of range-dependent environment are fully considered, and the numerical implementation is kept feasible. After verifying the accuracy and reliability of the model, low-frequency sound propagation characteristics in the seamount environment are analyzed. The results indicate lateral variability in bathymetry can lead to out-of-plane effects such as the horizontal refraction phenomenon, while the coupling effect tends to restore the abnormal sound field and produces acoustic field diffraction behind the seamount. This model effectively considers the effects of the horizontal refraction and coupling, which are proportional to the scale of the seamount.展开更多
We report, for the first time to our knowledge, an on-chip mode-locked laser diode(OCMLLD) that employs multimode interference reflectors to eliminate the need of facet mirrors to form the cavity. The result is an OCM...We report, for the first time to our knowledge, an on-chip mode-locked laser diode(OCMLLD) that employs multimode interference reflectors to eliminate the need of facet mirrors to form the cavity. The result is an OCMLLD that does not require cleaved facets to operate, enabling us to locate this OCMLLD at any location within the photonic chip. This OCMLLD provides a simple source of optical pulses that can be inserted within a photonic integrated circuit chip for subsequent photonic signal processing operations within the chip(modulation, optical filtering, pulse rate multiplication, and so on). The device was designed using standardized building blocks of a generic active/passive In P technology platform, fabricated in a multi-project wafer run, and achieved mode-locking operation at its fundamental frequency, given the uncertainty at the design step of the optical length of these mirrors, critical to achieve colliding pulse mode-locked operation.展开更多
Methylation of the N6 position of adenine, termed N6-methyladenine, protects DNA from restriction endonucleases via the host-specific restriction-modification system. N6-methyladenine was discovered and has been well ...Methylation of the N6 position of adenine, termed N6-methyladenine, protects DNA from restriction endonucleases via the host-specific restriction-modification system. N6-methyladenine was discovered and has been well studied in bacteria. N6-adenine-specific DNA methyltransferase（N6AMT） is the main enzyme catalyzing the methylation of the adenine base and knowledge of this enzyme was mainly derived from work in prokaryotic models. However, large-scale gene discovery at the genome level in many model organisms indicated that the N6AMT gene also exists in eukaryotes, such as humans, mice, fruit flies and plants. Here, we cloned a N6AMT gene from Nilaparvata lugens（Nlu-N6AMT） and amplified its fulllength transcript. Then, we carried out a systematic investigation of N6AMT in 33 publically available insect genomes, indicating that all studied insects had N6AMT. Genomic structure analysis showed that insect N6AMT has short introns compared with the mammalian homologs. Domain and phylogenetic analysis indicated that insect N6AMT had a conserved N6-adenine Mlase domain that is specific to catalyze the adenine methylation. Nlu-N6AMT was highly expressed in the adult female. We knocked down Nlu-N6AMT by feeding ds RNA from the second instar nymph to adult female, inducing retard development of adult female. In all, we provide the first genome-wide analysis of N6AMT in insects and presented the experimental evidence that N6AMT might have important functions in reproductive development and ovary maturation.展开更多
The delamination of copper lead frames from epoxy molding compounds(EMC)is a severe problem for microelectronic devices,as it leads to reduced heat dissipation or circuit breakage.The micro/nanoscale surface structuri...The delamination of copper lead frames from epoxy molding compounds(EMC)is a severe problem for microelectronic devices,as it leads to reduced heat dissipation or circuit breakage.The micro/nanoscale surface structuring of copper is a promising method to improve the copper-EMC interfacial adhesion.In this study,the generation of micro/nano hybrid structures on copper surfaces through femtosecond pulsed laser irradiation is proposed to improve interfacial adhesion.The micro/nano hybrid structures were realized by generating nanoscale laser-induced periodic surface structures(LIPSS)on microscale parallel grooves.Several types of hybrid surface structures were generated by changing the laser polarization direction,fluence,and scanning speed.At a specific aspect ratio of microgrooves,a latticed structure was generated on the sides of microgrooves by combining LIPSS formation and direct laser interference patterning.This study provides an efficient method for the micro/nanoscale hybrid surface structure formation for interfacial adhesion improvement between copperand EMC.展开更多
Carbon nanoparticle coatings on laser-patterned stainless-steel surfaces present a solid lubrication system where the pattern's recessions act as lubricant-retaining reservoirs.This study investigates the influenc...Carbon nanoparticle coatings on laser-patterned stainless-steel surfaces present a solid lubrication system where the pattern's recessions act as lubricant-retaining reservoirs.This study investigates the influence of the structural depth of line patterns coated with multi-walled carbon nanotubes(CNTs)and carbon onions(COs)on their respective potential to reduce friction and wear.Direct laser interference patterning(DLIP)with a pulse duration of 12 ps is used to create line patterns with three different structural depths at a periodicity of 3.5μm on AISI 304 steel platelets.Subsequently,electrophoretic deposition(EPD)is applied to form homogeneous carbon nanoparticle coatings on the patterned platelets.Tribological ball-on-disc experiments are conducted on the as-described surfaces with an alumina counter body at a load of 100 mN.The results show that the shallower the coated structure,the lower its coefficient of friction(COF),regardless of the particle type.Thereby,with a minimum of just below 0.20,CNTs reach lower COF values than COs over most of the testing period.The resulting wear tracks are characterized by scanning electron microscopy,transmission electron microscopy,and energy-dispersive X-ray spectroscopy.During friction testing,the CNTs remain in contact,and the immediate proximity,whereas the CO coating is largely removed.Regardless of structural depth,no oxidation occurs on CNT-coated surfaces,whereas minor oxidation is detected on CO-coated wear tracks.展开更多
基金Supported by Office of Naval Research grant N00014-07-1-1069the National Nature Science Foundation of China grant 50979019the Belgian National Fund for Scientific Research (F.R.S. - FNRS)
文摘Compared to a scalar pressure sensor, a vector sensor can provide a higher signal-to-noise ratio （SNR） signal and more detailed intbrmation on the sound field. Study on vector sensors and their applications have become a hot topic. Research on the representation of a vector field is highly relevant for extending the scope of vector sensor technology. This paper discusses the range-frequency distribution of the vector field due to a broadband acoustic source moving in a shallow-water waveguide as the self noise of a surface ship, and the vector extension of the waveguide impulse response measured over a limited frequency range using an active source of known waveform. From theory analysis and numerical simulation, the range-frequency representation of a vector field exhibits an interference structure qualitatively similar to that of the corresponding pressure field but, being quantitatively different, provides additional information on the waveguide, especially through the vertical component. For the range-frequency representation, physical quantities that can better exhibit the interference characteristics of the wavegaide are the products of pressure and particle velocity and of the pressure and pressure gradient. An image processing method to effectively detect and isolate the individual striations from an interference structure was reviewed briefly. The representation of the vector impulse response was discussed according to two different measurement systems, also known as particle velocity and pressure gradient. The vector impulse response representation can not only provide additional information from pressure only but even more than that of the range-frequency representation.
基金Project supported by the National Natural Science Foundation of China(Grant No.11804360)the IACAS Frontier Exploration Project(Grant No.QYTS202103)the Key Laboratory Foundation of Acoustic Science and Technology(Grant No.2021-JCJQ-LB-066-08)。
文摘Large-scale topography, such as a seamount, substantially impacts low-frequency sound propagation in an ocean waveguide, limiting the application of low-frequency acoustic detecting techniques. A three-dimensional(3D) coupledmode model is developed to calculate the acoustic field in an ocean waveguide with seamount topography and analyze the3D effect. In this model, a correction is introduced in the bottom boundary, theoretically making the acoustic field satisfy the energy conservation. Furthermore, a large azimuth angle calculation range is obtained by using the operator theory and higher-order Pade approximation. Additionally, the model has advantages related to the coupling mode and parabolic equation theory. The couplings corresponding to the effects of range-dependent environment are fully considered, and the numerical implementation is kept feasible. After verifying the accuracy and reliability of the model, low-frequency sound propagation characteristics in the seamount environment are analyzed. The results indicate lateral variability in bathymetry can lead to out-of-plane effects such as the horizontal refraction phenomenon, while the coupling effect tends to restore the abnormal sound field and produces acoustic field diffraction behind the seamount. This model effectively considers the effects of the horizontal refraction and coupling, which are proportional to the scale of the seamount.
基金support from the Spanish Ministerio de Economia y Competitividad Di DACTIC project (TEC201347753-C3-3-R)financial support from SENESCYT (National Secretary of Science, Technology, and Innovation, Quito, Ecuador) for the Ph.D. stage at Universidad Carlos Ⅲ de Madrid
文摘We report, for the first time to our knowledge, an on-chip mode-locked laser diode(OCMLLD) that employs multimode interference reflectors to eliminate the need of facet mirrors to form the cavity. The result is an OCMLLD that does not require cleaved facets to operate, enabling us to locate this OCMLLD at any location within the photonic chip. This OCMLLD provides a simple source of optical pulses that can be inserted within a photonic integrated circuit chip for subsequent photonic signal processing operations within the chip(modulation, optical filtering, pulse rate multiplication, and so on). The device was designed using standardized building blocks of a generic active/passive In P technology platform, fabricated in a multi-project wafer run, and achieved mode-locking operation at its fundamental frequency, given the uncertainty at the design step of the optical length of these mirrors, critical to achieve colliding pulse mode-locked operation.
基金supported by the National Basic Research Program of China (2012CB114102)
文摘Methylation of the N6 position of adenine, termed N6-methyladenine, protects DNA from restriction endonucleases via the host-specific restriction-modification system. N6-methyladenine was discovered and has been well studied in bacteria. N6-adenine-specific DNA methyltransferase（N6AMT） is the main enzyme catalyzing the methylation of the adenine base and knowledge of this enzyme was mainly derived from work in prokaryotic models. However, large-scale gene discovery at the genome level in many model organisms indicated that the N6AMT gene also exists in eukaryotes, such as humans, mice, fruit flies and plants. Here, we cloned a N6AMT gene from Nilaparvata lugens（Nlu-N6AMT） and amplified its fulllength transcript. Then, we carried out a systematic investigation of N6AMT in 33 publically available insect genomes, indicating that all studied insects had N6AMT. Genomic structure analysis showed that insect N6AMT has short introns compared with the mammalian homologs. Domain and phylogenetic analysis indicated that insect N6AMT had a conserved N6-adenine Mlase domain that is specific to catalyze the adenine methylation. Nlu-N6AMT was highly expressed in the adult female. We knocked down Nlu-N6AMT by feeding ds RNA from the second instar nymph to adult female, inducing retard development of adult female. In all, we provide the first genome-wide analysis of N6AMT in insects and presented the experimental evidence that N6AMT might have important functions in reproductive development and ovary maturation.
文摘The delamination of copper lead frames from epoxy molding compounds(EMC)is a severe problem for microelectronic devices,as it leads to reduced heat dissipation or circuit breakage.The micro/nanoscale surface structuring of copper is a promising method to improve the copper-EMC interfacial adhesion.In this study,the generation of micro/nano hybrid structures on copper surfaces through femtosecond pulsed laser irradiation is proposed to improve interfacial adhesion.The micro/nano hybrid structures were realized by generating nanoscale laser-induced periodic surface structures(LIPSS)on microscale parallel grooves.Several types of hybrid surface structures were generated by changing the laser polarization direction,fluence,and scanning speed.At a specific aspect ratio of microgrooves,a latticed structure was generated on the sides of microgrooves by combining LIPSS formation and direct laser interference patterning.This study provides an efficient method for the micro/nanoscale hybrid surface structure formation for interfacial adhesion improvement between copperand EMC.
基金financial support by the Deutsche Forschungsgemeinschaft(DFG,German Research Foundation)within the project MU 959/47-1Furthermore,the authors gratefully acknowledge funding in the ZuMat projectsupported by the State of Saarland from the European Regional Development Fund(Europäischer Fonds für Regionale Entwicklung,EFRE).P.Grützmacher and C.Gachot would like to thank the Government of Lower Austria(WST3)for financially supporting the endowed professorship tribology at the TU Wien.V.Presser thanks Eduard Arzt(INM)for his continuing support.
文摘Carbon nanoparticle coatings on laser-patterned stainless-steel surfaces present a solid lubrication system where the pattern's recessions act as lubricant-retaining reservoirs.This study investigates the influence of the structural depth of line patterns coated with multi-walled carbon nanotubes(CNTs)and carbon onions(COs)on their respective potential to reduce friction and wear.Direct laser interference patterning(DLIP)with a pulse duration of 12 ps is used to create line patterns with three different structural depths at a periodicity of 3.5μm on AISI 304 steel platelets.Subsequently,electrophoretic deposition(EPD)is applied to form homogeneous carbon nanoparticle coatings on the patterned platelets.Tribological ball-on-disc experiments are conducted on the as-described surfaces with an alumina counter body at a load of 100 mN.The results show that the shallower the coated structure,the lower its coefficient of friction(COF),regardless of the particle type.Thereby,with a minimum of just below 0.20,CNTs reach lower COF values than COs over most of the testing period.The resulting wear tracks are characterized by scanning electron microscopy,transmission electron microscopy,and energy-dispersive X-ray spectroscopy.During friction testing,the CNTs remain in contact,and the immediate proximity,whereas the CO coating is largely removed.Regardless of structural depth,no oxidation occurs on CNT-coated surfaces,whereas minor oxidation is detected on CO-coated wear tracks.
