In this paper,we have proposed a novel structure of Ka-band based phased array antenna with calibration function.In the design of Kaband antenna,the active phased array system is adopted and the antenna would work in ...In this paper,we have proposed a novel structure of Ka-band based phased array antenna with calibration function.In the design of Kaband antenna,the active phased array system is adopted and the antenna would work in the dual polarization separation mode.We have given out the schematic diagram for the proposed Ka-band antenna,where the Kaband antenna is in the form of waveguide slot array antenna,with 96 units in azimuth and 1 unit in distance.Each group of units is driven by a singlechannel Transmitter/Receiver(T/R)component,and the whole array contains 192 T/R components in total.The size of the T/R component is 55mm(length)×50mm(width)×5.8mm(height),3 Sub-micro Sub-Miniature Push-on(SSMP)blind sockets and a 21-core low-frequency socket are designed on the two sides of the T/R component.In order to meet the technical specifications of phased array antenna,the Ka-band transceiver component is designed based on Low Temperatrue Co-fired Ceramic(LTCC)technology to achieve miniaturization and lightweight.In our approach,the feed network includes two parts:transceiver network and calibration network.The transceiver network consists of 241:8 time-delay power dividers,12 two-way power dividers and 2 six-way time-delay power dividers.The power supply required by theKaband antenna unit is provided to each active component by the power module after Ka band wavelet control distribution.Simulation and measurement results are given in the form of standing wave and scanning capability.展开更多
A compact Ka-band monolithic microwave integrated circuit(MMIC) voltage controlled oscillator (VCO) with wide tuning range and high output power,which is based on GaAs PHEMT process,is presented.A method is introduced...A compact Ka-band monolithic microwave integrated circuit(MMIC) voltage controlled oscillator (VCO) with wide tuning range and high output power,which is based on GaAs PHEMT process,is presented.A method is introduced to reduce the chip size and to increase the bandwidth of operation.The procedure to design a MMIC VCO is also described here.The measured oscillating frequency of the MMIC VCO is 36±1.2GHz and the output power is 10±1dBm.The fabricated MMIC chip size is 1.3mm×1.0mm.展开更多
The performance of a microwave monolithic integrated circuit .（MMIC） amplifier with high output power in the Ka-band is presented. Using 75mm 0.25μm GaAs PHEMT technology provided by the Hebei Semiconductor Researc...The performance of a microwave monolithic integrated circuit .（MMIC） amplifier with high output power in the Ka-band is presented. Using 75mm 0.25μm GaAs PHEMT technology provided by the Hebei Semiconductor Research Institute, this three-stage power amplifier, with a chip size of 19.25mm^2 （3.5mm × 5.5mm）, on 100μm GaAs substrate achieves a linear gain of more than 16dB in the 32.5-35.5GHz frequency range,with an average output power at 1dB gain compression of P1dB = 29. 8dBm and a maximum saturated output power of Psat = 31dBm.展开更多
The performance analysis and simulation of spectrally efficient modulation schemes , MPSK and MQAM, for Ka-band fixed satellite communication system are provided. The effects of bandwidth limitation, nonlinearityity d...The performance analysis and simulation of spectrally efficient modulation schemes , MPSK and MQAM, for Ka-band fixed satellite communication system are provided. The effects of bandwidth limitation, nonlinearityity distortion and adjacent channel interference (ACI) in Ka-band satellite channel corrupted by additive white Gaussian noise (AWGN) are taken into account. The analytical expressions of the HER of coherent MPSK and MQAM signal are obtained and shown to be in good agreement with the simulation results.展开更多
This study concerns a Ka-band solid-state transmitter cloud radar, made in China, which can operate in three different work modes, with different pulse widths, and coherent and incoherent integration numbers, to meet ...This study concerns a Ka-band solid-state transmitter cloud radar, made in China, which can operate in three different work modes, with different pulse widths, and coherent and incoherent integration numbers, to meet the requirements for cloud remote sensing over the Tibetan Plateau. Specifically, the design of the three operational modes of the radar（i.e., boundary mode M1, cirrus mode M2, and precipitation mode M3） is introduced. Also, a cloud radar data merging algorithm for the three modes is proposed. Using one month＇s continuous measurements during summertime at Naqu on the Tibetan Plateau,we analyzed the consistency between the cloud radar measurements of the three modes. The number of occurrences of radar detections of hydrometeors and the percentage contributions of the different modes＇ data to the merged data were estimated.The performance of the merging algorithm was evaluated. The results indicated that the minimum detectable reflectivity for each mode was consistent with theoretical results. Merged data provided measurements with a minimum reflectivity of -35 dBZ at the height of 5 km, and obtained information above the height of 0.2 km. Measurements of radial velocity by the three operational modes agreed very well, and systematic errors in measurements of reflectivity were less than 2 dB. However,large discrepancies existed in the measurements of the linear depolarization ratio taken from the different operational modes.The percentage of radar detections of hydrometeors in mid- and high-level clouds increased by 60% through application of pulse compression techniques. In conclusion, the merged data are appropriate for cloud and precipitation studies over the Tibetan Plateau.展开更多
Based on cloud-probe data and airborne Ka-band cloud radar data collected in Baoding on 5 August 2018,the microphysical structural characteristics of cumulus(Cu)cloud at the precipitation stage were investigated.The c...Based on cloud-probe data and airborne Ka-band cloud radar data collected in Baoding on 5 August 2018,the microphysical structural characteristics of cumulus(Cu)cloud at the precipitation stage were investigated.The cloud droplets in the Cu cloud were found to be significantly larger than those in stratiform(STF)cloud.In the Cu cloud,most cloud particles were between 7 and 10μm in diameter,while in the STF cloud the majority of cloud particles grew no larger than 2μm.The sensitivity of cloud properties to aerosols varied with height.The cloud droplet effective radius showed a negative relationship with the aerosol number concentration(Na)in the cloud planetary boundary layer(PBL)and upper layer above the PBL.However,the cloud droplet concentration(Nc)varied little with decreased Na in the high liquid water content region above 1500 m.High Na values of between 300 and 1853 cm-3 were found in the PBL,and the maximum Na was sampled near the surface in August in the Hebei region,which was lower than that in autumn and winter.High radar reflectivity corresponded to large FCDP(fast cloud droplet probe)particle concentrations and small aerosol particle concentrations,and vice versa for low radar reflectivity.Strong updrafts in the Cu cloud increased the peak radius and Nc,and broadened cloud droplet spectrum;lower air temperature was favorable for particle condensational growth and produced larger droplets.展开更多
Rain attenuation is the major problem for Ka-band satellite communications, and the fading due to rain can be well described by a lognormally distributed, first-order auto regressive model. Forward Error-control Codin...Rain attenuation is the major problem for Ka-band satellite communications, and the fading due to rain can be well described by a lognormally distributed, first-order auto regressive model. Forward Error-control Coding (FEC) techniques can be used to reduce the effect of the rain attenuation, but the use of FEC causes a reduction in the bandwidth efficiency.In order to increase the bandwidth efficiency as well as maintain high link availability, an Adaptive Forward Error-control Coding (AFEC) scheme with rain fading prediction is proposed and analyzed in this paper. The results show that AFEC offers a good trade-off between link availability and bandwidth efficiency.展开更多
为满足卫星通信中双频共口径、高集成、多波束等要求,提出了一种基于封装天线(Antenna in Package, AIP)架构的Ka频段收发共口径多波束相控阵天线。天线以双频堆叠微带单元的形式实现了收发共口径,并通过天线集成滤波器保证了收发通道...为满足卫星通信中双频共口径、高集成、多波束等要求,提出了一种基于封装天线(Antenna in Package, AIP)架构的Ka频段收发共口径多波束相控阵天线。天线以双频堆叠微带单元的形式实现了收发共口径,并通过天线集成滤波器保证了收发通道的隔离度优于44 dB。在±60°范围内,64元接收阵增益优于17.4 dB,128元发射阵增益优于20.2 dB,具有良好的波束扫描性能。为获得收发多波束一片式集成,在收发(Transmitter/Receiver, T/R)组件中使用晶圆级三维系统集成封装(Three Dimensions System in Package, 3D-SIP)并结合微凸点的制备技术,保证了系统级芯片(System-on-Chip, SOC)的高密度二次集成。高低频混压技术同样被应用于阵面、收发网络、控制供电链路的多层板集成。所提多波束的相控阵天线新架构具有高密度集成TR组件、多波束一体化、高效散热等特点,在卫星通信和数据链等方面具有广阔的应用前景。展开更多
Surface Water and Ocean Topography(SWOT)is a next-generation radar altimeter that offers high resolution,wide swath,imaging capabilities.It has provided free public data worldwide since December 2023.This paper aims t...Surface Water and Ocean Topography(SWOT)is a next-generation radar altimeter that offers high resolution,wide swath,imaging capabilities.It has provided free public data worldwide since December 2023.This paper aims to preliminarily analyze the detection capabilities of the Ka-band radar interferometer(KaRIn)and Nadir altimeter(NALT),which are carried out by SWOT for internal solitary waves(ISWs),and to gather other remote sensing images to validate SWOT observations.KaRIn effectively detects ISW surface features and generates surface height variation maps reflecting the modulations induced by ISWs.However,its swath width does not completely cover the entire wave packet,and the resolution of L2/L3 level products(about 2 km)cannot be used to identify ISWs with smaller wavelengths.Additionally,significant wave height(SWH)images exhibit blocky structures that are not suitable for ISW studies;sea surface height anomaly(SSHA)images display systematic leftright banding.We optimize this imbalance using detrending methods;however,more precise treatment should commence with L1-level data.Quantitative analysis based on L3-level SSHA data indicates that the average SSHA variation induced by ISWs ranges from 10 cm to 20 cm.NALTs disturbed by ISWs record unusually elevated SWH and SSHA values,rendering the data unsuitable for analysis and necessitating targeted corrections in future retracking algorithms.For the normalized radar cross section,Ku-band and four-parameter maximum likelihood estimation retracking demonstrated greater sensitivity to minor changes in the sea surface,making them more suitable for ISW detection.In conclusion,SWOT demonstrates outstanding capabilities in ISW detection,significantly advancing research on the modulation of the sea surface by ISWs and remote sensing imaging mechanisms.展开更多
This paper proposes a direct injection-locked frequency divider（ILFD） with a wide locking range in the Ka-band. A complementary cross-coupled architecture is used to enhance the overdriving voltage of the switch tra...This paper proposes a direct injection-locked frequency divider（ILFD） with a wide locking range in the Ka-band. A complementary cross-coupled architecture is used to enhance the overdriving voltage of the switch transistor so that the divider locking range is extended efficiently. New insights into the locking range and output power are proposed. A new method to analyze and optimize the injection sensitivity is presented and a layout technique to reduce the parasitics of the cross-coupled transistors is applied to decrease the frequency shift and the locking range degradation. The circuit is designed in a standard 90-nm CMOS process. The total locking range of the ILFD is 43.8% at 34.5 GHz with an incident power of –3.5 dBm. The divider IC consumes 3.6 mW of power at the supply voltage of 1.2 V. The chip area including the pads is 0.50.5 mm2.展开更多
文摘In this paper,we have proposed a novel structure of Ka-band based phased array antenna with calibration function.In the design of Kaband antenna,the active phased array system is adopted and the antenna would work in the dual polarization separation mode.We have given out the schematic diagram for the proposed Ka-band antenna,where the Kaband antenna is in the form of waveguide slot array antenna,with 96 units in azimuth and 1 unit in distance.Each group of units is driven by a singlechannel Transmitter/Receiver(T/R)component,and the whole array contains 192 T/R components in total.The size of the T/R component is 55mm(length)×50mm(width)×5.8mm(height),3 Sub-micro Sub-Miniature Push-on(SSMP)blind sockets and a 21-core low-frequency socket are designed on the two sides of the T/R component.In order to meet the technical specifications of phased array antenna,the Ka-band transceiver component is designed based on Low Temperatrue Co-fired Ceramic(LTCC)technology to achieve miniaturization and lightweight.In our approach,the feed network includes two parts:transceiver network and calibration network.The transceiver network consists of 241:8 time-delay power dividers,12 two-way power dividers and 2 six-way time-delay power dividers.The power supply required by theKaband antenna unit is provided to each active component by the power module after Ka band wavelet control distribution.Simulation and measurement results are given in the form of standing wave and scanning capability.
文摘A compact Ka-band monolithic microwave integrated circuit(MMIC) voltage controlled oscillator (VCO) with wide tuning range and high output power,which is based on GaAs PHEMT process,is presented.A method is introduced to reduce the chip size and to increase the bandwidth of operation.The procedure to design a MMIC VCO is also described here.The measured oscillating frequency of the MMIC VCO is 36±1.2GHz and the output power is 10±1dBm.The fabricated MMIC chip size is 1.3mm×1.0mm.
文摘The performance of a microwave monolithic integrated circuit .（MMIC） amplifier with high output power in the Ka-band is presented. Using 75mm 0.25μm GaAs PHEMT technology provided by the Hebei Semiconductor Research Institute, this three-stage power amplifier, with a chip size of 19.25mm^2 （3.5mm × 5.5mm）, on 100μm GaAs substrate achieves a linear gain of more than 16dB in the 32.5-35.5GHz frequency range,with an average output power at 1dB gain compression of P1dB = 29. 8dBm and a maximum saturated output power of Psat = 31dBm.
文摘The performance analysis and simulation of spectrally efficient modulation schemes , MPSK and MQAM, for Ka-band fixed satellite communication system are provided. The effects of bandwidth limitation, nonlinearityity distortion and adjacent channel interference (ACI) in Ka-band satellite channel corrupted by additive white Gaussian noise (AWGN) are taken into account. The analytical expressions of the HER of coherent MPSK and MQAM signal are obtained and shown to be in good agreement with the simulation results.
基金funded by the National Sciences Foundation of China(Grant No.91337103)the China Meteorological Administration Special Public Welfare Research Fund(Grant No.GYHY201406001)
文摘This study concerns a Ka-band solid-state transmitter cloud radar, made in China, which can operate in three different work modes, with different pulse widths, and coherent and incoherent integration numbers, to meet the requirements for cloud remote sensing over the Tibetan Plateau. Specifically, the design of the three operational modes of the radar（i.e., boundary mode M1, cirrus mode M2, and precipitation mode M3） is introduced. Also, a cloud radar data merging algorithm for the three modes is proposed. Using one month＇s continuous measurements during summertime at Naqu on the Tibetan Plateau,we analyzed the consistency between the cloud radar measurements of the three modes. The number of occurrences of radar detections of hydrometeors and the percentage contributions of the different modes＇ data to the merged data were estimated.The performance of the merging algorithm was evaluated. The results indicated that the minimum detectable reflectivity for each mode was consistent with theoretical results. Merged data provided measurements with a minimum reflectivity of -35 dBZ at the height of 5 km, and obtained information above the height of 0.2 km. Measurements of radial velocity by the three operational modes agreed very well, and systematic errors in measurements of reflectivity were less than 2 dB. However,large discrepancies existed in the measurements of the linear depolarization ratio taken from the different operational modes.The percentage of radar detections of hydrometeors in mid- and high-level clouds increased by 60% through application of pulse compression techniques. In conclusion, the merged data are appropriate for cloud and precipitation studies over the Tibetan Plateau.
基金funded by the National Key Research and Devel-opment Program of China[grant number 2017YFC1501405]the National Natural Science Foundation of China[grant numbers 41975180,41705119,and 41575131]the National Center of Meteorology,Abu Dhabi,AE(UAE Research Program for Rain Enhancement Science)。
文摘Based on cloud-probe data and airborne Ka-band cloud radar data collected in Baoding on 5 August 2018,the microphysical structural characteristics of cumulus(Cu)cloud at the precipitation stage were investigated.The cloud droplets in the Cu cloud were found to be significantly larger than those in stratiform(STF)cloud.In the Cu cloud,most cloud particles were between 7 and 10μm in diameter,while in the STF cloud the majority of cloud particles grew no larger than 2μm.The sensitivity of cloud properties to aerosols varied with height.The cloud droplet effective radius showed a negative relationship with the aerosol number concentration(Na)in the cloud planetary boundary layer(PBL)and upper layer above the PBL.However,the cloud droplet concentration(Nc)varied little with decreased Na in the high liquid water content region above 1500 m.High Na values of between 300 and 1853 cm-3 were found in the PBL,and the maximum Na was sampled near the surface in August in the Hebei region,which was lower than that in autumn and winter.High radar reflectivity corresponded to large FCDP(fast cloud droplet probe)particle concentrations and small aerosol particle concentrations,and vice versa for low radar reflectivity.Strong updrafts in the Cu cloud increased the peak radius and Nc,and broadened cloud droplet spectrum;lower air temperature was favorable for particle condensational growth and produced larger droplets.
文摘Rain attenuation is the major problem for Ka-band satellite communications, and the fading due to rain can be well described by a lognormally distributed, first-order auto regressive model. Forward Error-control Coding (FEC) techniques can be used to reduce the effect of the rain attenuation, but the use of FEC causes a reduction in the bandwidth efficiency.In order to increase the bandwidth efficiency as well as maintain high link availability, an Adaptive Forward Error-control Coding (AFEC) scheme with rain fading prediction is proposed and analyzed in this paper. The results show that AFEC offers a good trade-off between link availability and bandwidth efficiency.
文摘为满足卫星通信中双频共口径、高集成、多波束等要求,提出了一种基于封装天线(Antenna in Package, AIP)架构的Ka频段收发共口径多波束相控阵天线。天线以双频堆叠微带单元的形式实现了收发共口径,并通过天线集成滤波器保证了收发通道的隔离度优于44 dB。在±60°范围内,64元接收阵增益优于17.4 dB,128元发射阵增益优于20.2 dB,具有良好的波束扫描性能。为获得收发多波束一片式集成,在收发(Transmitter/Receiver, T/R)组件中使用晶圆级三维系统集成封装(Three Dimensions System in Package, 3D-SIP)并结合微凸点的制备技术,保证了系统级芯片(System-on-Chip, SOC)的高密度二次集成。高低频混压技术同样被应用于阵面、收发网络、控制供电链路的多层板集成。所提多波束的相控阵天线新架构具有高密度集成TR组件、多波束一体化、高效散热等特点,在卫星通信和数据链等方面具有广阔的应用前景。
基金The National Natural Science Foundation of China under contract Nos U2006207 and 42006164.
文摘Surface Water and Ocean Topography(SWOT)is a next-generation radar altimeter that offers high resolution,wide swath,imaging capabilities.It has provided free public data worldwide since December 2023.This paper aims to preliminarily analyze the detection capabilities of the Ka-band radar interferometer(KaRIn)and Nadir altimeter(NALT),which are carried out by SWOT for internal solitary waves(ISWs),and to gather other remote sensing images to validate SWOT observations.KaRIn effectively detects ISW surface features and generates surface height variation maps reflecting the modulations induced by ISWs.However,its swath width does not completely cover the entire wave packet,and the resolution of L2/L3 level products(about 2 km)cannot be used to identify ISWs with smaller wavelengths.Additionally,significant wave height(SWH)images exhibit blocky structures that are not suitable for ISW studies;sea surface height anomaly(SSHA)images display systematic leftright banding.We optimize this imbalance using detrending methods;however,more precise treatment should commence with L1-level data.Quantitative analysis based on L3-level SSHA data indicates that the average SSHA variation induced by ISWs ranges from 10 cm to 20 cm.NALTs disturbed by ISWs record unusually elevated SWH and SSHA values,rendering the data unsuitable for analysis and necessitating targeted corrections in future retracking algorithms.For the normalized radar cross section,Ku-band and four-parameter maximum likelihood estimation retracking demonstrated greater sensitivity to minor changes in the sea surface,making them more suitable for ISW detection.In conclusion,SWOT demonstrates outstanding capabilities in ISW detection,significantly advancing research on the modulation of the sea surface by ISWs and remote sensing imaging mechanisms.
基金Project supported by the National Basic Research Program(No.2010CB327404)the National High Technology Researchand Development Program of China(No.2011AA10305)+1 种基金the International Cooperation Projects in Science and Technology(No.2011DFA11310)the National Natural Science Foundation of China(Nos.60901012,61106024)
文摘This paper proposes a direct injection-locked frequency divider（ILFD） with a wide locking range in the Ka-band. A complementary cross-coupled architecture is used to enhance the overdriving voltage of the switch transistor so that the divider locking range is extended efficiently. New insights into the locking range and output power are proposed. A new method to analyze and optimize the injection sensitivity is presented and a layout technique to reduce the parasitics of the cross-coupled transistors is applied to decrease the frequency shift and the locking range degradation. The circuit is designed in a standard 90-nm CMOS process. The total locking range of the ILFD is 43.8% at 34.5 GHz with an incident power of –3.5 dBm. The divider IC consumes 3.6 mW of power at the supply voltage of 1.2 V. The chip area including the pads is 0.50.5 mm2.
