The transverse momentum distributions of the identified particles produced in small collision systems at the Relativistic Heavy Ion Collider(RHIC) and Large Hadron Collider(LHC) have been analyzed by four models. The ...The transverse momentum distributions of the identified particles produced in small collision systems at the Relativistic Heavy Ion Collider(RHIC) and Large Hadron Collider(LHC) have been analyzed by four models. The first two models utilize the blast-wave model with different statistics. The last two models employ certain linear correspondences based on different distributions.The four models describe the experimental data measured by the Pioneering High Energy Nuclear Interaction eXperiment, Solenoidal Tracker at RHIC, and A Large Ion Collider Experiment collaborations equally well. It is found that both the kinetic freeze-out temperature and transverse flow velocity in the central collisions are comparable with those in the peripheral collisions. With the increase of collision energy from that of the RHIC to that of the LHC,the considered quantities typically do not decrease. Comparing with the central collisions, the proton–proton collisions are closer to the peripheral collisions.展开更多
The kinetic freeze-out temperatures, T_0, in nucleus–nucleus collisions at the Relativistic Heavy Ion Collider(RHIC) and Large Hadron Collider(LHC) energies are extracted by four methods:(1) the Blast-Wave model with...The kinetic freeze-out temperatures, T_0, in nucleus–nucleus collisions at the Relativistic Heavy Ion Collider(RHIC) and Large Hadron Collider(LHC) energies are extracted by four methods:(1) the Blast-Wave model with Boltzmann–Gibbs statistics(the BGBW model),(2) the Blast-Wave model with Tsallis statistics(the TBW model),(3) the Tsallis distribution with flow effect(the improved Tsallis distribution), and(4) the intercept in T=T_0+ am_0(the alternative method), where m_0 denotes the rest mass and T denotes the effective temperature which can be obtained by different distribution functions. It is found that the relative sizes of T_0 in central and peripheral collisions obtained by the conventional BGBW model which uses a zero or nearly zero transverse flow velocity, β_T, are contradictory in tendency with other methods. With a re-examination for β_Tin the first method,in which β_Tis taken to be ～ (0:40 ± 0:07)c, a recalculation presents a consistent result with others. Finally, our results show that the kinetic freeze-out temperature in central collisions is larger than that in peripheral collisions.展开更多
The transverse momentum spectra of different types of particles produced in central and peripheral gold–gold(Au–Au)and inelastic proton–proton(pp)collisions at the Relativistic Heavy Ion Collider,as well as in cent...The transverse momentum spectra of different types of particles produced in central and peripheral gold–gold(Au–Au)and inelastic proton–proton(pp)collisions at the Relativistic Heavy Ion Collider,as well as in central and peripheral lead-lead(Pb–Pb)and pp collisions at the Large Hadron Collider,are analyzed by the multi-component standard(Boltzmann–Gibbs,Fermi–Dirac,and Bose–Einstein)distributions.The obtained results from the standard distribution give an approximate agreement with the measured experimental data by the STAR,PHENIX,and ALICE Collaborations.The behavior of the effective(kinetic freeze-out)temperature,transverse flow velocity,and kinetic freeze-out volume for particles with different masses is obtained,which observes the early kinetic freezeout of heavier particles as compared to the lighter particles.The parameters of emissions of different particles are observed to be different,which reveals a direct signature of the mass-dependent differential kinetic freeze-out.It is also observed that the peripheral nucleus–nucleus(AA)and pp collisions at the same center-of-mass energy per nucleon pair are in good agreement in terms of the extracted parameters.展开更多
A high thrust-to-weight ratio poses challenges to the high-temperature performance of Ni-based superalloys. The oxidation behavior of GH4738 at extreme temperatures has been investigated by isothermal and non-isotherm...A high thrust-to-weight ratio poses challenges to the high-temperature performance of Ni-based superalloys. The oxidation behavior of GH4738 at extreme temperatures has been investigated by isothermal and non-isothermal experiments. As a result of the competitive diffusion of alloying elements, the oxide scale included an outermost porous oxide layer (OOL), an inner relatively dense oxide layer (IOL), and an internal oxide zone (IOZ), depending on the temperature and time. A high temperature led to the formation of large voids at the IOL/IOZ interface. At 1200℃, the continuity of the Cr-rich oxide layer in the IOL was destroyed, and thus, spallation occurred. Extension of oxidation time contributed to the size of Al-rich oxide particles with the increase in the IOZ. Based on this finding,the oxidation kinetics of GH4738 was discussed, and the corresponding oxidation behavior at 900-1100℃ was predicted.展开更多
The elementary reactions of propylene polymerization catalyzed by conventional Ziegler-Natta catalysts was proposed according to the comprehensive view and without considering the effect of any impurity in the materia...The elementary reactions of propylene polymerization catalyzed by conventional Ziegler-Natta catalysts was proposed according to the comprehensive view and without considering the effect of any impurity in the material on propylene polymerization. The Monte Carlo simulation technique was employed to investigate the kinetics of propylene polymerization in order to determine the validity of the stationary state assumption and the effects of the polymerization temperature on the polymerization. The simulated total amount of active species, which only increases quickly at the beginning of the polymerization, indicates that the stationary state assumption in the studied system is valid. Moreover, significant effects of polymerization temperature on the polymerization conversion, and the molecular weight and its distribution were also analyzed. The simulated results show that the consumption rate of propylene increases with the increase of polymerization temperature; the maximum values of the number-average degree of polymerization are constant at different polymerization temperatures, however, the peak appears earlier with the higher temperature; as the polymerization temperature increases, the average molecular weight decreases and the molecular weight distribution changes greatly.展开更多
Developing efficient energy storage for sodium-ion batteries(SIBs)by creating high-performance heterojunctions and understanding their interfacial interaction at the atomic/molecular level holds promise but is also ch...Developing efficient energy storage for sodium-ion batteries(SIBs)by creating high-performance heterojunctions and understanding their interfacial interaction at the atomic/molecular level holds promise but is also challenging.Besides,sluggish reaction kinetics at low temperatures restrict the operation of SIBs in cold climates.Herein,cross-linking nanoarchitectonics of WS_(2)/Ti_(3)C_(2)T_(x) heterojunction,featuring built-in electric field(BIEF),have been developed,employing as a model to reveal the positive effect of heterojunction design and BIEF for modifying the reaction kinetics and electrochemical activity.Particularly,the theoretical analysis manifests the discrepancy in work functions leads to the electronic flow from the electron-rich Ti_(3)C_(2)T_(x) to layered WS_(2),spontaneously forming the BIEF and“ion reservoir”at the heterogeneous interface.Besides,the generation of cross-linking pathways further promotes the transportation of electrons/ions,which guarantees rapid diffusion kinetics and excellent structure coupling.Consequently,superior sodium storage performance is obtained for the WS_(2)/Ti_(3)C_(2)T_(x) heterojunction,with only 0.2%decay per cycle at 5.0 A g^(-1)(25℃)up to 1000 cycles and a high capacity of 293.5 mA h g^(-1)(0.1A g^(-1)after 100 cycles)even at-20℃.Importantly,the spontaneously formed BIEF,accompanied by“ion reservoir”,in heterojunction provides deep understandings of the correlation between structure fabricated and performance obtained.展开更多
The thermodynamic properties of charged particles,such as the energy density,pressure,entropy density,particle density,and squared speed of sound at the kinetic freeze-out in the Au+Au collisions from the relativistic...The thermodynamic properties of charged particles,such as the energy density,pressure,entropy density,particle density,and squared speed of sound at the kinetic freeze-out in the Au+Au collisions from the relativistic heavy ion collider (RHIC)beam energy scan program √S_(NN) and in the Cu+Cu collisions at √S_(NN),200 GeV are studied using the thermodynamically consistent Tsallis distribution.The energy density,pressure,and particle density decrease monotonically with the collision energy for the same collision centrality;These properties also decrease monotonically from the central to peripheral collisions at the same collision energy.While the scaled energy densityε∕T^(4) and scaled entropy density s∕T^(3) demonstrate the opposite trend with the collision energy for the same collision centrality.There is a correlation betweenε∕T^(4) and s∕T^(3) at the same centrality.In addition,the squared speed of sound was calculated to determine that all the collision energies share nearly the same value at different collision centralities.展开更多
The diffusion of La in ε-Fe 2～3N(ε)and γ′-Fe 4N (γ′)phases produced by plasma nitriding was studied. It is found that with increasing nitriding time, the ε phase continuously decomposes into γ′ one under...The diffusion of La in ε-Fe 2～3N(ε)and γ′-Fe 4N (γ′)phases produced by plasma nitriding was studied. It is found that with increasing nitriding time, the ε phase continuously decomposes into γ′ one under employed experimental conditions and compared with γ′ phase or ε+γ′ ones, the mono one ε has an impedient effect on depth of La diffusion. The growth of La layer in dual phases and mono one follows an approximate exponential law and a parabolic one, respectively, and this kinetics law does not change with increasing temperature. The effect of increasing temperature in the range of 520 to 560 ℃ on La diffusion depth is less than that of phase constitution change such as the decomposition of ε phase into γ′ one.展开更多
The present study investigates the kinetics of hydrogen sulfide （H2S） decomposition into hydrogen and sulfur carded out in a nonthermal plasma dielectric barrier discharge （NTP-DBD） reactor operated at ,-430 K for...The present study investigates the kinetics of hydrogen sulfide （H2S） decomposition into hydrogen and sulfur carded out in a nonthermal plasma dielectric barrier discharge （NTP-DBD） reactor operated at ,-430 K for in situ removal of sulfur condensed inside the reactor walls. The dissociation of H2S was primarily initiated by the excitation of carder gas （At） through electron collisions which appeared to be the rate determining step. The experiments were carded out with initial concentration of H2S varied between 5 and 25 vol% at 150 mL/min （at standard temperature and pressure） flow rate in the input power range of 0.5 to 2 W. The reaction rate model based on continuous stirred tank reactor （CSTR） model failed to explain the global kinetics of H2S decomposition, probably due to the multiple complex reactions involved in H2S decomposition, whereas Michaelis-Menten model was satisfactory. Typical results indicated that the reaction order approached zero with increasing inlet concentration.展开更多
The kinetics of non-catalyzed decompositions of xylose and its decomposition product furfural in high temperature liquid water （HTLW） was studied for temperature from 180 to 220℃ and under pressure of 10MPa. The ma...The kinetics of non-catalyzed decompositions of xylose and its decomposition product furfural in high temperature liquid water （HTLW） was studied for temperature from 180 to 220℃ and under pressure of 10MPa. The main products of xylose decomposition were furfural and formic acid, and furfural further degraded to formic acid under HTLW condition. With the assumption of first order kinetics e.quation, the evaluated activation energy of xylose and furfural decomposition was 123.27kJ·mol^-1 and 58.84kJ·mol^-1, respectively.展开更多
The volatilization kinetics of senarmontite（Sb_2O_3） was analyzed in a neutral atmosphere in two temperature ranges： 550-615 °C（roasting temperature） and 660-1100 °C（melting temperature） by using a th...The volatilization kinetics of senarmontite（Sb_2O_3） was analyzed in a neutral atmosphere in two temperature ranges： 550-615 °C（roasting temperature） and 660-1100 °C（melting temperature） by using a thermogravimetric analysis method under various gas flow rates and using a 1.3 m L ceramic crucible（11 mm in internal diameter and 14 mm in height）. The effect of particle size was also analyzed. The experimental results of mass loss data, X-ray diffraction（XRD） analysis of partially reacted samples and thermodynamic studies indicate that the senarmontite becomes volatile in the form of Sb_4O_6（g） without the formation of any intermediary compound in the entire temperature range. At roasting temperatures, the volatilization kinetics of Sb_2O_3 was analyzed using the model X=kappt. The volatilization reaction was controlled by the surface chemical reaction and an activation energy value of 193.0 k J/mol was obtained in this temperature range. Based on the volatilization kinetics at the melting temperatures, for linear behaviour in nitrogen gas, kinetic constants were determined, and an activation energy of 73.9 k J/mol was calculated for the volatilization reaction with a surface area of 8.171×10^（-5）m^2.展开更多
The 2D kinetic Monte Carlo （KMC） simulation was used to study the effects of different substrate temperatures on the microstructure of Ni-Cr films in the process of deposition by the electron beam physical vapor dep...The 2D kinetic Monte Carlo （KMC） simulation was used to study the effects of different substrate temperatures on the microstructure of Ni-Cr films in the process of deposition by the electron beam physical vapor deposition （EB-PVD）. In the KMC model, substrate was assumed to be a ＂surface＂ of tight-packed rows, and the simulation includes two phenomena： adatom-surface collision and adatom diffusion. While the interaction between atoms was described by the embedded atom method, the jumping energy was calculated by the molecular static （MS） calculation. The initial location of the adatom was defined by the Momentum Scheme. The results reveal that there exists a critical substrate temperature which means that the lowest packing density and the highest surface roughness structure will be achieved when the temperature is lower than the smaller critical value, while the roughness of both surfaces and the void contents keep decreasing with the substrate temperature increasing until it reaches the higher critical value. The results also indicate that the critical substrate temperature rises as the deposition rate increases.展开更多
High temperature liquid water(HTLW) has drawn increasing attention as an environmentally benign medium for organic chemical reactions,especially acid-/base-catalyzed reactions. Non-catalyzed hydrolyses of gallotannin ...High temperature liquid water(HTLW) has drawn increasing attention as an environmentally benign medium for organic chemical reactions,especially acid-/base-catalyzed reactions. Non-catalyzed hydrolyses of gallotannin and tara tannin in HTLW for the simultaneous preparation of gallic acid(GA) and pyrogallol(PY) are under investigation in our laboratory. In this study,the hydrolysis kinetics of gallotannin and tara tannin were determined. The reaction is indicated to be a typical consecutive first-order one in which GA has formed as a main intermediate and PY as the final product. Selective decomposition of tannin in HTLW was proved to be possible by adjusting reaction temperature and time. The present results provide an important basic data and reference for the green preparation of GA and PY.展开更多
We report the investigation on the low-temperature oxidation of cyclohexane in a jet-stirred reactor over 500-742 K. Synchrotron vacuum ultraviolet photoionization mass spectrometry （SVUV-PIMS） was used for identify...We report the investigation on the low-temperature oxidation of cyclohexane in a jet-stirred reactor over 500-742 K. Synchrotron vacuum ultraviolet photoionization mass spectrometry （SVUV-PIMS） was used for identifying and quantifying the oxidation species. Major products, cyclic olefins, and oxygenated products including reactive hydroperoxides and high oxygen compounds were detected. Compared with n-alkanes, a narrow low-temperature window （-80 K） was observed in the low-temperature oxidation of cyclohexane. Besides, a kinetic model for cyclohexane oxidation was developed based on the CNRS model [Combust. Flame 160, 2319 （2013）], which can better capture the experimental results than previous models. Based on the modeling analysis, the 1,5-H shift dominates the crucial isomerization steps of the first and second O2 addition products in the low-temperature chain branching process of cyclohexane. The negative temperature coefficient behavior of cyclohexane oxidation results from the reduced chain branching due to the competition from chain inhibition and propagation reactions, i.e. the reaction between cyclohexyl radical and O2 and the de- composition of cyclohexylperoxy radical, both producing cyclohexene and HO2 radical, as well as the decomposition of cyclohexylhydroperoxy radical producing hex-5-en-l-al and OH radical.展开更多
The kinetics of denitrogenation from liquid steel was studied by using an oxygen-nitrogen analysis system(LECO TC-436) under 1600 degreesC similar to 2813 degreesC conditions. The results show that when [S]=0.005%, ni...The kinetics of denitrogenation from liquid steel was studied by using an oxygen-nitrogen analysis system(LECO TC-436) under 1600 degreesC similar to 2813 degreesC conditions. The results show that when [S]=0.005%, nitrogen removal was controlled by nitrogen transfer in liquid diffusion layer, when [S]=0.012% and 0.140%, it was controlled by both nitrogen transfer in liquid diffusion layer and the chemical reaction at the liquid-gas interface below 2250 degreesC, and by nitrogen transfer in liquid diffusion layer under 2250 degreesC similar to 2813 degreesC conditions. The activation energy E-a was 57 kJ/mol for 0.0050%[S], 95 kJ/mol for 0.012%[S], 165 kJ/mol for 0.140%[S]. The resistance of sulphur on nitrogen removal decreased with the temperature rose, and disappeared at 2630 degreesC. Based on the results obtained, it has been answered why the nitrogen in liquid steel can be decreased rapidly by carbon-oxygen reaction under very high oxygen and sulphur content conditions during the BOF, EAF, VOD and AOD steelmaking processes.展开更多
We present a study of the dynamic behavior of a two-sublattice spin-5/2 Ising model with bilinear and crystal-field interactions in the presence of a time-dependent oscillating external magnetic field on alternating l...We present a study of the dynamic behavior of a two-sublattice spin-5/2 Ising model with bilinear and crystal-field interactions in the presence of a time-dependent oscillating external magnetic field on alternating layers of a hexagonal lattice by using the Glauber-type stochastic dynamics.The lattice is formed by alternate layers of spins σ=5/2 and S=5/2.We employ the Glauber transition rates to construct the mean-field dynamic equations.First,we investigate the time variations of the average sublattice magnetizations to find the phases in the system and then the thermal behavior of the dynamic sublattice magnetizations to characterize the nature（first-or second-order） of the phase transitions and to obtain the dynamic phase transition（DPT） points.We also study the thermal behavior of the dynamic total magnetization to find the dynamic compensation temperature and to determine the type of the dynamic compensation behavior.We present the dynamic phase diagrams,including the dynamic compensation temperatures,in nine different planes.The phase diagrams contain seven different fundamental phases,thirteen different mixed phases,in which the binary and ternary combination of fundamental phases and the compensation temperature or the L-type behavior strongly depend on the interaction parameters.展开更多
The K+ adsorption kinetics of fluvo-aquic soil and cinnamon soil under different temperatureswere studied. The results showed: 1) The first order equations were the most suitable forfitting the adsorption under variou...The K+ adsorption kinetics of fluvo-aquic soil and cinnamon soil under different temperatureswere studied. The results showed: 1) The first order equations were the most suitable forfitting the adsorption under various temperature levels with constant K+ concentration indisplacing fluid. With temperature increasing, the fitness of Elovich equation increased,while those of power equation and parabolic diffusion equation decreased; 2)the apparentadsorption rate constant ka and the product of ka multiplied by the apparent equilibriumadsorption qincreased when temperature increased, while the apparent equilibrium adsorptionqreduced; 3)temperature influenced hardly the reaction order, the order of concentrationand adsorpton site were always 1 under various temperatures, if they were taken intoaccount simultaneously, the adsorption should be a two-order reaction process; 4)theGibbs free energy change △G of potassium adsorption were negative, ranged from -4444.56to -2450.63Jmol-1,and increased with temperature increasing, while enthalpy change △H,entropy change △S, apparent adsorption activation Ea, adsorption activation energy E1and desorption activation energy E2 were temperature-independent; 5)the adsorption wasspontaneous process with heat releasing and entropy dropping, fluvo-aquic soil releasedmore heat than cinnamon soil.展开更多
In the conversion of methane and propane under high temperature and pressure,the ignition delay time(IDT)is a key parameter to consider for designing an inherently safe process.In this study,the IDT characteristics of...In the conversion of methane and propane under high temperature and pressure,the ignition delay time(IDT)is a key parameter to consider for designing an inherently safe process.In this study,the IDT characteristics of methane and propane(700–1000 K,10–20 bar)were studied experimentally and using kinetic modeling tools at stoichiometric fuel-tooxygen ratios.All the experiments were conducted through insentropic compression.The reliable experimental data were obtained by using the adiabatic core hypothesis,which can be used to generate and validate the detailed chemical kinetics model.The IDTs of methane and propane were recorded by a rapid compression machine(RCM)and compared to the predicted values obtained by the NUIGMech 3.0 mechanism.To test the applicability of NUIGMech 3.0 under different reaction conditions,the influence of temperature in the range of 700–1000 K(and the influence of pressure in the range of 10–20 bar)on the IDT was studied.The results showed that NUIGMech 3.0 could reasonably reproduce the experimentally determined IDT under the wide range of conditions studied.The constant volume chemical kinetics model was used to reveal the effect of temperature on the elementary reaction,and the negative temperature coefficient(NTC)behavior of propane was also observed at 20 bar.The experimental data can serve as a reference for the correction and application of kinetic data,as well as provide a theoretical basis for the safe conversion of low-carbon hydrocarbon chemicals.展开更多
Considering the complicated interactions between temperature,pressure and hydration reaction of cement,a coupled model of temperature and pressure based on hydration kinetics during deep-water well cementing was estab...Considering the complicated interactions between temperature,pressure and hydration reaction of cement,a coupled model of temperature and pressure based on hydration kinetics during deep-water well cementing was established.The differential method was used to do the coupled numerical calculation,and the calculation results were compared with experimental and field data to verify the accuracy of the model.When the interactions between temperature,pressure and hydration reaction are considered,the calculation accuracy of the model proposed is within 5.6%,which can meet the engineering requirements.A series of numerical simulation was conducted to find out the variation pattern of temperature,pressure and hydration degree during the cement curing.The research results show that cement temperature increases dramatically as a result of the heat of cement hydration.With the development of cement gel strength,the pore pressure of cement slurry decreases gradually to even lower than the formation pressure,causing gas channeling;the transient temperature and pressure have an impact on the rate of cement hydration reaction,so cement slurry in the deeper part of wellbore has a higher rate of hydration rate as a result of the high temperature and pressure.For well cementing in deep water regions,the low temperature around seabed would slow the rate of cement hydration and thus prolong the cementing cycle.展开更多
In this research,a solid 1%Li/Ca-La mixed oxide catalyst was prepared using co-precipitation method followed by wet impregnation.The prepared catalyst was used in the transesterification reaction of canola oil and met...In this research,a solid 1%Li/Ca-La mixed oxide catalyst was prepared using co-precipitation method followed by wet impregnation.The prepared catalyst was used in the transesterification reaction of canola oil and methanol for biodiesel synthesis.The effects of calcination and reaction temperatures were investigated on the activity of the catalyst.In addition,rate of the reaction was studied through a kinetic model for which parameters were determined.Surface properties and structure of the catalyst were characterized through the powder X-ray diffraction(XRD),thermogravimetry/derivative thermogravimetry(TG/DTG),and Fourier transform infrared spectroscopy analysis.All these emphasized that the performance of the catalyst corresponded to the generation of the active sites and their thermal activation.展开更多
基金supported by the National Natural Science Foundation of China(Nos.11575103 and 11747319)the Shanxi Provincial Natural Science Foundation(No.201701D121005)+1 种基金the Fund for Shanxi ‘‘1331 Project’’ Key Subjects Constructionthe US DOE(DE-FG02-87ER40331.A008)
文摘The transverse momentum distributions of the identified particles produced in small collision systems at the Relativistic Heavy Ion Collider(RHIC) and Large Hadron Collider(LHC) have been analyzed by four models. The first two models utilize the blast-wave model with different statistics. The last two models employ certain linear correspondences based on different distributions.The four models describe the experimental data measured by the Pioneering High Energy Nuclear Interaction eXperiment, Solenoidal Tracker at RHIC, and A Large Ion Collider Experiment collaborations equally well. It is found that both the kinetic freeze-out temperature and transverse flow velocity in the central collisions are comparable with those in the peripheral collisions. With the increase of collision energy from that of the RHIC to that of the LHC,the considered quantities typically do not decrease. Comparing with the central collisions, the proton–proton collisions are closer to the peripheral collisions.
基金supported by the National Natural Science Foundation of China(Nos.11575103 and 11747319)the Shanxi Provincial Natural Science Foundation(No.201701D121005)the Fund for Shanxi "1331 Project" Key Subjects Construction
文摘The kinetic freeze-out temperatures, T_0, in nucleus–nucleus collisions at the Relativistic Heavy Ion Collider(RHIC) and Large Hadron Collider(LHC) energies are extracted by four methods:(1) the Blast-Wave model with Boltzmann–Gibbs statistics(the BGBW model),(2) the Blast-Wave model with Tsallis statistics(the TBW model),(3) the Tsallis distribution with flow effect(the improved Tsallis distribution), and(4) the intercept in T=T_0+ am_0(the alternative method), where m_0 denotes the rest mass and T denotes the effective temperature which can be obtained by different distribution functions. It is found that the relative sizes of T_0 in central and peripheral collisions obtained by the conventional BGBW model which uses a zero or nearly zero transverse flow velocity, β_T, are contradictory in tendency with other methods. With a re-examination for β_Tin the first method,in which β_Tis taken to be ～ (0:40 ± 0:07)c, a recalculation presents a consistent result with others. Finally, our results show that the kinetic freeze-out temperature in central collisions is larger than that in peripheral collisions.
基金supported by the National Natural Science Foundation of China(Nos.11575103 and 11947418)the Chinese Government Scholarship(China Scholarship Council)+2 种基金the Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi(STIP)(No.201802017)the Shanxi Provincial Natural Science Foundation(No.201901D111043)the Fund for Shanxi‘‘1331 Project’’Key Subjects Construction。
文摘The transverse momentum spectra of different types of particles produced in central and peripheral gold–gold(Au–Au)and inelastic proton–proton(pp)collisions at the Relativistic Heavy Ion Collider,as well as in central and peripheral lead-lead(Pb–Pb)and pp collisions at the Large Hadron Collider,are analyzed by the multi-component standard(Boltzmann–Gibbs,Fermi–Dirac,and Bose–Einstein)distributions.The obtained results from the standard distribution give an approximate agreement with the measured experimental data by the STAR,PHENIX,and ALICE Collaborations.The behavior of the effective(kinetic freeze-out)temperature,transverse flow velocity,and kinetic freeze-out volume for particles with different masses is obtained,which observes the early kinetic freezeout of heavier particles as compared to the lighter particles.The parameters of emissions of different particles are observed to be different,which reveals a direct signature of the mass-dependent differential kinetic freeze-out.It is also observed that the peripheral nucleus–nucleus(AA)and pp collisions at the same center-of-mass energy per nucleon pair are in good agreement in terms of the extracted parameters.
基金financially supported by the National Key R&D Program of China (No.2021YFB3700400)the National Natural Science Foundation of China (Nos.52074030,51904021,and 52174294)。
文摘A high thrust-to-weight ratio poses challenges to the high-temperature performance of Ni-based superalloys. The oxidation behavior of GH4738 at extreme temperatures has been investigated by isothermal and non-isothermal experiments. As a result of the competitive diffusion of alloying elements, the oxide scale included an outermost porous oxide layer (OOL), an inner relatively dense oxide layer (IOL), and an internal oxide zone (IOZ), depending on the temperature and time. A high temperature led to the formation of large voids at the IOL/IOZ interface. At 1200℃, the continuity of the Cr-rich oxide layer in the IOL was destroyed, and thus, spallation occurred. Extension of oxidation time contributed to the size of Al-rich oxide particles with the increase in the IOZ. Based on this finding,the oxidation kinetics of GH4738 was discussed, and the corresponding oxidation behavior at 900-1100℃ was predicted.
基金The National Natural Science Foundation of China(No.20406016)the Project of Fujian Petrochemical Company of SIN-OPEC (No.MS/FJ-08-JS-15-2005-01).
文摘The elementary reactions of propylene polymerization catalyzed by conventional Ziegler-Natta catalysts was proposed according to the comprehensive view and without considering the effect of any impurity in the material on propylene polymerization. The Monte Carlo simulation technique was employed to investigate the kinetics of propylene polymerization in order to determine the validity of the stationary state assumption and the effects of the polymerization temperature on the polymerization. The simulated total amount of active species, which only increases quickly at the beginning of the polymerization, indicates that the stationary state assumption in the studied system is valid. Moreover, significant effects of polymerization temperature on the polymerization conversion, and the molecular weight and its distribution were also analyzed. The simulated results show that the consumption rate of propylene increases with the increase of polymerization temperature; the maximum values of the number-average degree of polymerization are constant at different polymerization temperatures, however, the peak appears earlier with the higher temperature; as the polymerization temperature increases, the average molecular weight decreases and the molecular weight distribution changes greatly.
基金supported by the faculty startup funds from the Yangzhou Universitythe Natural Science Foundation of Jiangsu Province(BK20210821)+1 种基金the National Natural Science Foundation of China(22102141)the Lvyangjinfeng Talent Program of Yangzhou。
文摘Developing efficient energy storage for sodium-ion batteries(SIBs)by creating high-performance heterojunctions and understanding their interfacial interaction at the atomic/molecular level holds promise but is also challenging.Besides,sluggish reaction kinetics at low temperatures restrict the operation of SIBs in cold climates.Herein,cross-linking nanoarchitectonics of WS_(2)/Ti_(3)C_(2)T_(x) heterojunction,featuring built-in electric field(BIEF),have been developed,employing as a model to reveal the positive effect of heterojunction design and BIEF for modifying the reaction kinetics and electrochemical activity.Particularly,the theoretical analysis manifests the discrepancy in work functions leads to the electronic flow from the electron-rich Ti_(3)C_(2)T_(x) to layered WS_(2),spontaneously forming the BIEF and“ion reservoir”at the heterogeneous interface.Besides,the generation of cross-linking pathways further promotes the transportation of electrons/ions,which guarantees rapid diffusion kinetics and excellent structure coupling.Consequently,superior sodium storage performance is obtained for the WS_(2)/Ti_(3)C_(2)T_(x) heterojunction,with only 0.2%decay per cycle at 5.0 A g^(-1)(25℃)up to 1000 cycles and a high capacity of 293.5 mA h g^(-1)(0.1A g^(-1)after 100 cycles)even at-20℃.Importantly,the spontaneously formed BIEF,accompanied by“ion reservoir”,in heterojunction provides deep understandings of the correlation between structure fabricated and performance obtained.
基金supported in part by the National Natural Science Foundation of China (Nos. 11905120 and 11947416)the Natural Science Foundation of the Sichuan Province (No. 2023NSFSC1322)+1 种基金the United States Department of Energy (#DE-FG02-93ER40773)the NNSA (No. DENA0003841 (CENTAUR))。
文摘The thermodynamic properties of charged particles,such as the energy density,pressure,entropy density,particle density,and squared speed of sound at the kinetic freeze-out in the Au+Au collisions from the relativistic heavy ion collider (RHIC)beam energy scan program √S_(NN) and in the Cu+Cu collisions at √S_(NN),200 GeV are studied using the thermodynamically consistent Tsallis distribution.The energy density,pressure,and particle density decrease monotonically with the collision energy for the same collision centrality;These properties also decrease monotonically from the central to peripheral collisions at the same collision energy.While the scaled energy densityε∕T^(4) and scaled entropy density s∕T^(3) demonstrate the opposite trend with the collision energy for the same collision centrality.There is a correlation betweenε∕T^(4) and s∕T^(3) at the same centrality.In addition,the squared speed of sound was calculated to determine that all the collision energies share nearly the same value at different collision centralities.
文摘The diffusion of La in ε-Fe 2～3N(ε)and γ′-Fe 4N (γ′)phases produced by plasma nitriding was studied. It is found that with increasing nitriding time, the ε phase continuously decomposes into γ′ one under employed experimental conditions and compared with γ′ phase or ε+γ′ ones, the mono one ε has an impedient effect on depth of La diffusion. The growth of La layer in dual phases and mono one follows an approximate exponential law and a parabolic one, respectively, and this kinetics law does not change with increasing temperature. The effect of increasing temperature in the range of 520 to 560 ℃ on La diffusion depth is less than that of phase constitution change such as the decomposition of ε phase into γ′ one.
基金the Ministry of New and Renewable Energy(MNRE)-New Delhi,for financial support(Reference No. 103/117/2008-NT)
文摘The present study investigates the kinetics of hydrogen sulfide （H2S） decomposition into hydrogen and sulfur carded out in a nonthermal plasma dielectric barrier discharge （NTP-DBD） reactor operated at ,-430 K for in situ removal of sulfur condensed inside the reactor walls. The dissociation of H2S was primarily initiated by the excitation of carder gas （At） through electron collisions which appeared to be the rate determining step. The experiments were carded out with initial concentration of H2S varied between 5 and 25 vol% at 150 mL/min （at standard temperature and pressure） flow rate in the input power range of 0.5 to 2 W. The reaction rate model based on continuous stirred tank reactor （CSTR） model failed to explain the global kinetics of H2S decomposition, probably due to the multiple complex reactions involved in H2S decomposition, whereas Michaelis-Menten model was satisfactory. Typical results indicated that the reaction order approached zero with increasing inlet concentration.
基金Supported by the National Natural Science Foundation of China （No.20476089） and the Project of the Ministry of Science and Technology of China （No.2004CCA05500）.
文摘The kinetics of non-catalyzed decompositions of xylose and its decomposition product furfural in high temperature liquid water （HTLW） was studied for temperature from 180 to 220℃ and under pressure of 10MPa. The main products of xylose decomposition were furfural and formic acid, and furfural further degraded to formic acid under HTLW condition. With the assumption of first order kinetics e.quation, the evaluated activation energy of xylose and furfural decomposition was 123.27kJ·mol^-1 and 58.84kJ·mol^-1, respectively.
文摘The volatilization kinetics of senarmontite（Sb_2O_3） was analyzed in a neutral atmosphere in two temperature ranges： 550-615 °C（roasting temperature） and 660-1100 °C（melting temperature） by using a thermogravimetric analysis method under various gas flow rates and using a 1.3 m L ceramic crucible（11 mm in internal diameter and 14 mm in height）. The effect of particle size was also analyzed. The experimental results of mass loss data, X-ray diffraction（XRD） analysis of partially reacted samples and thermodynamic studies indicate that the senarmontite becomes volatile in the form of Sb_4O_6（g） without the formation of any intermediary compound in the entire temperature range. At roasting temperatures, the volatilization kinetics of Sb_2O_3 was analyzed using the model X=kappt. The volatilization reaction was controlled by the surface chemical reaction and an activation energy value of 193.0 k J/mol was obtained in this temperature range. Based on the volatilization kinetics at the melting temperatures, for linear behaviour in nitrogen gas, kinetic constants were determined, and an activation energy of 73.9 k J/mol was calculated for the volatilization reaction with a surface area of 8.171×10^（-5）m^2.
基金Hi-tech Research and Development Program of China (2002AA763020)National Natural Science Foundation of China (50304007)+1 种基金Fund of Beforehand Research of National Defense (51418040304HT0114)New Century Excellent Talents in University 2004
文摘The 2D kinetic Monte Carlo （KMC） simulation was used to study the effects of different substrate temperatures on the microstructure of Ni-Cr films in the process of deposition by the electron beam physical vapor deposition （EB-PVD）. In the KMC model, substrate was assumed to be a ＂surface＂ of tight-packed rows, and the simulation includes two phenomena： adatom-surface collision and adatom diffusion. While the interaction between atoms was described by the embedded atom method, the jumping energy was calculated by the molecular static （MS） calculation. The initial location of the adatom was defined by the Momentum Scheme. The results reveal that there exists a critical substrate temperature which means that the lowest packing density and the highest surface roughness structure will be achieved when the temperature is lower than the smaller critical value, while the roughness of both surfaces and the void contents keep decreasing with the substrate temperature increasing until it reaches the higher critical value. The results also indicate that the critical substrate temperature rises as the deposition rate increases.
基金Project supported by the National Natural Science Foundation ofChina (No. 20674068)the Natural Science Foundation of Zheji-ang Province, China (No. Y405157)
文摘High temperature liquid water(HTLW) has drawn increasing attention as an environmentally benign medium for organic chemical reactions,especially acid-/base-catalyzed reactions. Non-catalyzed hydrolyses of gallotannin and tara tannin in HTLW for the simultaneous preparation of gallic acid(GA) and pyrogallol(PY) are under investigation in our laboratory. In this study,the hydrolysis kinetics of gallotannin and tara tannin were determined. The reaction is indicated to be a typical consecutive first-order one in which GA has formed as a main intermediate and PY as the final product. Selective decomposition of tannin in HTLW was proved to be possible by adjusting reaction temperature and time. The present results provide an important basic data and reference for the green preparation of GA and PY.
基金supported by the National Natural Science Foundation of China(No.91641205,No.51622605,No.91541201)the Shanghai Science and Technology Committee(No.17XD1402000)
文摘We report the investigation on the low-temperature oxidation of cyclohexane in a jet-stirred reactor over 500-742 K. Synchrotron vacuum ultraviolet photoionization mass spectrometry （SVUV-PIMS） was used for identifying and quantifying the oxidation species. Major products, cyclic olefins, and oxygenated products including reactive hydroperoxides and high oxygen compounds were detected. Compared with n-alkanes, a narrow low-temperature window （-80 K） was observed in the low-temperature oxidation of cyclohexane. Besides, a kinetic model for cyclohexane oxidation was developed based on the CNRS model [Combust. Flame 160, 2319 （2013）], which can better capture the experimental results than previous models. Based on the modeling analysis, the 1,5-H shift dominates the crucial isomerization steps of the first and second O2 addition products in the low-temperature chain branching process of cyclohexane. The negative temperature coefficient behavior of cyclohexane oxidation results from the reduced chain branching due to the competition from chain inhibition and propagation reactions, i.e. the reaction between cyclohexyl radical and O2 and the de- composition of cyclohexylperoxy radical, both producing cyclohexene and HO2 radical, as well as the decomposition of cyclohexylhydroperoxy radical producing hex-5-en-l-al and OH radical.
文摘The kinetics of denitrogenation from liquid steel was studied by using an oxygen-nitrogen analysis system(LECO TC-436) under 1600 degreesC similar to 2813 degreesC conditions. The results show that when [S]=0.005%, nitrogen removal was controlled by nitrogen transfer in liquid diffusion layer, when [S]=0.012% and 0.140%, it was controlled by both nitrogen transfer in liquid diffusion layer and the chemical reaction at the liquid-gas interface below 2250 degreesC, and by nitrogen transfer in liquid diffusion layer under 2250 degreesC similar to 2813 degreesC conditions. The activation energy E-a was 57 kJ/mol for 0.0050%[S], 95 kJ/mol for 0.012%[S], 165 kJ/mol for 0.140%[S]. The resistance of sulphur on nitrogen removal decreased with the temperature rose, and disappeared at 2630 degreesC. Based on the results obtained, it has been answered why the nitrogen in liquid steel can be decreased rapidly by carbon-oxygen reaction under very high oxygen and sulphur content conditions during the BOF, EAF, VOD and AOD steelmaking processes.
文摘We present a study of the dynamic behavior of a two-sublattice spin-5/2 Ising model with bilinear and crystal-field interactions in the presence of a time-dependent oscillating external magnetic field on alternating layers of a hexagonal lattice by using the Glauber-type stochastic dynamics.The lattice is formed by alternate layers of spins σ=5/2 and S=5/2.We employ the Glauber transition rates to construct the mean-field dynamic equations.First,we investigate the time variations of the average sublattice magnetizations to find the phases in the system and then the thermal behavior of the dynamic sublattice magnetizations to characterize the nature（first-or second-order） of the phase transitions and to obtain the dynamic phase transition（DPT） points.We also study the thermal behavior of the dynamic total magnetization to find the dynamic compensation temperature and to determine the type of the dynamic compensation behavior.We present the dynamic phase diagrams,including the dynamic compensation temperatures,in nine different planes.The phase diagrams contain seven different fundamental phases,thirteen different mixed phases,in which the binary and ternary combination of fundamental phases and the compensation temperature or the L-type behavior strongly depend on the interaction parameters.
基金supported by the National Science Foundation of China(49391600)the Society Commonweal Fund(2001DIA20024).
文摘The K+ adsorption kinetics of fluvo-aquic soil and cinnamon soil under different temperatureswere studied. The results showed: 1) The first order equations were the most suitable forfitting the adsorption under various temperature levels with constant K+ concentration indisplacing fluid. With temperature increasing, the fitness of Elovich equation increased,while those of power equation and parabolic diffusion equation decreased; 2)the apparentadsorption rate constant ka and the product of ka multiplied by the apparent equilibriumadsorption qincreased when temperature increased, while the apparent equilibrium adsorptionqreduced; 3)temperature influenced hardly the reaction order, the order of concentrationand adsorpton site were always 1 under various temperatures, if they were taken intoaccount simultaneously, the adsorption should be a two-order reaction process; 4)theGibbs free energy change △G of potassium adsorption were negative, ranged from -4444.56to -2450.63Jmol-1,and increased with temperature increasing, while enthalpy change △H,entropy change △S, apparent adsorption activation Ea, adsorption activation energy E1and desorption activation energy E2 were temperature-independent; 5)the adsorption wasspontaneous process with heat releasing and entropy dropping, fluvo-aquic soil releasedmore heat than cinnamon soil.
基金supported by the National Natural Science Foundation of China [Grant No. 22278452]the SINOPEC Research Institute of Safety Engineering for financially supporting this project。
文摘In the conversion of methane and propane under high temperature and pressure,the ignition delay time(IDT)is a key parameter to consider for designing an inherently safe process.In this study,the IDT characteristics of methane and propane(700–1000 K,10–20 bar)were studied experimentally and using kinetic modeling tools at stoichiometric fuel-tooxygen ratios.All the experiments were conducted through insentropic compression.The reliable experimental data were obtained by using the adiabatic core hypothesis,which can be used to generate and validate the detailed chemical kinetics model.The IDTs of methane and propane were recorded by a rapid compression machine(RCM)and compared to the predicted values obtained by the NUIGMech 3.0 mechanism.To test the applicability of NUIGMech 3.0 under different reaction conditions,the influence of temperature in the range of 700–1000 K(and the influence of pressure in the range of 10–20 bar)on the IDT was studied.The results showed that NUIGMech 3.0 could reasonably reproduce the experimentally determined IDT under the wide range of conditions studied.The constant volume chemical kinetics model was used to reveal the effect of temperature on the elementary reaction,and the negative temperature coefficient(NTC)behavior of propane was also observed at 20 bar.The experimental data can serve as a reference for the correction and application of kinetic data,as well as provide a theoretical basis for the safe conversion of low-carbon hydrocarbon chemicals.
基金Supported by the National Natural Science Foundation of China(U1762216)China National Science and Technology Major Project(2016ZX05028-001-03)
文摘Considering the complicated interactions between temperature,pressure and hydration reaction of cement,a coupled model of temperature and pressure based on hydration kinetics during deep-water well cementing was established.The differential method was used to do the coupled numerical calculation,and the calculation results were compared with experimental and field data to verify the accuracy of the model.When the interactions between temperature,pressure and hydration reaction are considered,the calculation accuracy of the model proposed is within 5.6%,which can meet the engineering requirements.A series of numerical simulation was conducted to find out the variation pattern of temperature,pressure and hydration degree during the cement curing.The research results show that cement temperature increases dramatically as a result of the heat of cement hydration.With the development of cement gel strength,the pore pressure of cement slurry decreases gradually to even lower than the formation pressure,causing gas channeling;the transient temperature and pressure have an impact on the rate of cement hydration reaction,so cement slurry in the deeper part of wellbore has a higher rate of hydration rate as a result of the high temperature and pressure.For well cementing in deep water regions,the low temperature around seabed would slow the rate of cement hydration and thus prolong the cementing cycle.
基金supported by the Iran National Science Foundation(INSF)
文摘In this research,a solid 1%Li/Ca-La mixed oxide catalyst was prepared using co-precipitation method followed by wet impregnation.The prepared catalyst was used in the transesterification reaction of canola oil and methanol for biodiesel synthesis.The effects of calcination and reaction temperatures were investigated on the activity of the catalyst.In addition,rate of the reaction was studied through a kinetic model for which parameters were determined.Surface properties and structure of the catalyst were characterized through the powder X-ray diffraction(XRD),thermogravimetry/derivative thermogravimetry(TG/DTG),and Fourier transform infrared spectroscopy analysis.All these emphasized that the performance of the catalyst corresponded to the generation of the active sites and their thermal activation.
