Kraft lignin has the potential to replace traditional fossil resources for the preparation of high-value chemicals because it is rich in aromatic rings and active functional groups.An effective method for the pyrolysi...Kraft lignin has the potential to replace traditional fossil resources for the preparation of high-value chemicals because it is rich in aromatic rings and active functional groups.An effective method for the pyrolysis of kraft lignin into chemicals/fuels is microwave-assisted depolymerization.A simulation model is urgently needed to illustrate the coupling effect and mechanism of lignin conversion during the depolymerization process.In this study,COMSOL Multiphysics was used to simulate the microwave-assisted depolymerization process.The results showed that microwave power had a significant effect on the electric field and temperature distribution in the microwave cavity,while the reaction time had little effect on the electric field.The effect of the nitrogen flow rate on the electric field and temperature was negligible.The intensity of the electric field,heating rate of lignin,and final temperature of lignin depolymerization increased with increasing microwave power.展开更多
Kraft lignin was liquefied using polyethylene glycol#400(PEG)and glycerol(G)in a weight ratio of 80/20(w/w)and sulphuric acid(SA)as catalyst under atmospheric pressure at 160ºC.The three independent variables:rea...Kraft lignin was liquefied using polyethylene glycol#400(PEG)and glycerol(G)in a weight ratio of 80/20(w/w)and sulphuric acid(SA)as catalyst under atmospheric pressure at 160ºC.The three independent variables:reaction time(60,80 and 100 min),percentage of lignin(15,20 and 25%,w/w),and catalyst concentration(0,3 and 6%,w/w),were varied resulting in 27 experimental runs.The effect of these reaction conditions on the properties of the polyols was evaluated.The statistical analysis showed that only“the percentage of lignin”did not influence the properties of the liquefied products,however,reaction time and catalyst load were important parameters.The resulting liquefied products were characterized by FTIR analysis.展开更多
A newly isolated bacterium was screened out for its survival on medium with 6 000 mg/L kraft lignin as the sole carbon source and energy,and identified as Pandoraea sp.by 16S rRNA gene sequence analysis.The biodegrada...A newly isolated bacterium was screened out for its survival on medium with 6 000 mg/L kraft lignin as the sole carbon source and energy,and identified as Pandoraea sp.by 16S rRNA gene sequence analysis.The biodegradation experiment was carried out in mineral salt medium,containing 5 000 mg/L kraft lignin as only carbon and energy at pH 8.0 and 30 °C.Under these conditions,significant reduction in color and lignin content by the strain was observed after incubation for 5 d.The strain attains maximum reduction capability in color(44.6%) and lignin content(39.9%) within 5 d of incubation,and reduced chemical oxygen demand(COD) from initial concentration 7 399 to 3 980 mg/L at maximum reduction level of 46.2% on the 4th day.The total ion chromatograph(TIC) of compounds presented in the chloroform extract of control and bacterial treated samples shows the formation of several lignin-related aromatic compounds including some small molecular lignin fragments,indicating a strong destruction in the lignin structure.展开更多
When washed pulps is milled and ground to a fine powder, the resulting material may easily be degraded by cellulolytic enzymes. The klason and UV lignin content of the solid residuals obtained in this step were 49.9 %...When washed pulps is milled and ground to a fine powder, the resulting material may easily be degraded by cellulolytic enzymes. The klason and UV lignin content of the solid residuals obtained in this step were 49.9 % lignin for spruce KP, and 21.4 % for poplar KP. The solid residuals from enzymatic treatment contained about 93.3 % and 90.7 % of the lignin originally presented in the spruce KP and poplar KP respectively. The enzymatic treated residual was then subjected to mild acidolysis, which caused the cleavage of lignin-carbohydrate linkages. The resulting Ground Enzymatic/Acidolysis Kraft Lignin (GEA-KL) is of significantly higher yield than our previous two-step (enzymatic/acidolysis) residual kraft lignin (EA-KL). The improved method offers kraft lignin preparations in higher yield and purity than any other known method with minimal work up and solvent requirements. DFRC/quantitative 31P NMR protocol and quantitative DEPT edited 13C RMR were used for characterizing of RKLs.展开更多
Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High...Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High-grade dissolving pulp was prepared from eucalyptus using a combination of extremely low acid(ELA)pretreatment,Kraft cooking,and elementary chlorine-free(ECF)bleaching.The obtained pre-hydrolysate was catalytic conversion into furfural in a biphasic system,and lignin during Kraft cooking and ECF was recovered.The process condition was discussed as well as the mass flow direction.The results showed that ELA pretreatment could effectively remove 80.1%hemicellulose.Compared with traditional hydrothermal pretreatment,the ELA pretreatment significantly increased the xylose yield from 5.05 to 14.18 g/L at 170℃ for 2 h,which had practical significance for furfural production.The 82.7%furfural yield and 82.9%furfural selectivity were obtained from xylose-rich pre-hydrolysate using NaCl as a phase modifier in a biphasic system with 4-methyl-2-pentanone(MIBK)as an organic phase by ion exchange resin catalysts at 190℃ for 2 h.Subsequently,the pretreated eucalyptus was subjected to Kraft cooking,and the optimal alkali amount was 14%.Then,the Kraft pulp was bleached using the O-D1-EP-D_(2) sequence,and dissolving pulp was obtained with an ISO brightness of 86.0%,viscosity of 463 mL/g,andα-cellulose content of 95.4%.The Kraft lignin which has a potential application was investigated by 2D-HSQC NMR and 31P NMR.The results showed that the S/G ratio of Kraft lignin was 1.93,and the content of phenolic hydroxyl groups was 2.53 mmol/g.Moreover,based on the above proposed process,30.5 g dissolving pulp,5.5 g furfural,and 21.2 g lignin per 100 g eucalyptus chips(oven dry)were produced.This research will provide new catalysis and pulping technical routes for dissolving pulp,furfural,and Kraft lignin products,which are in great demand in the chemical industry.展开更多
In order to search the degradability of kraft lignin, the potential bacterial strains Bacillus subtilis(GU193980) and Klebsiella pneumoniae(GU193981) were isolated, screened and applied in axenic and co-culture condit...In order to search the degradability of kraft lignin, the potential bacterial strains Bacillus subtilis(GU193980) and Klebsiella pneumoniae(GU193981) were isolated, screened and applied in axenic and co-culture conditions. Results revealed that mixed culture showed better decolorization efficiency(80%) and reduction of pollution parameters(COD 73% and BOD62%) than axenic culture. This indicated syntrophic growth of these two bacteria rather than any antagonistic effect. The HPLC analysis of degraded samples of kraft lignin has shown the reduction in peak area compared to control, suggesting that decrease in color intensity might be largely attributed to the degradation of lignin by isolated bacteria.Further, the GC–MS analysis showed that most of the compounds detected in control were diminished after bacterial treatment. Further, the seed germination test using Phaseolus aureus has supported the detoxification of bacterial decolorized kraft lignin for environmental safety. All these observations have revealed that the developed bacterial co-culture was capable for the effective degradation and decolorization of lignin containing rayon grade pulp mill wastewater for environmental safety.展开更多
基金This work was supported by the Foundation of Key Laboratory of Pulp and Paper Science and Technology of the Ministry of Education of China(No.KF201917)the National Natural Science Foundation of China(31800497).
文摘Kraft lignin has the potential to replace traditional fossil resources for the preparation of high-value chemicals because it is rich in aromatic rings and active functional groups.An effective method for the pyrolysis of kraft lignin into chemicals/fuels is microwave-assisted depolymerization.A simulation model is urgently needed to illustrate the coupling effect and mechanism of lignin conversion during the depolymerization process.In this study,COMSOL Multiphysics was used to simulate the microwave-assisted depolymerization process.The results showed that microwave power had a significant effect on the electric field and temperature distribution in the microwave cavity,while the reaction time had little effect on the electric field.The effect of the nitrogen flow rate on the electric field and temperature was negligible.The intensity of the electric field,heating rate of lignin,and final temperature of lignin depolymerization increased with increasing microwave power.
文摘Kraft lignin was liquefied using polyethylene glycol#400(PEG)and glycerol(G)in a weight ratio of 80/20(w/w)and sulphuric acid(SA)as catalyst under atmospheric pressure at 160ºC.The three independent variables:reaction time(60,80 and 100 min),percentage of lignin(15,20 and 25%,w/w),and catalyst concentration(0,3 and 6%,w/w),were varied resulting in 27 experimental runs.The effect of these reaction conditions on the properties of the polyols was evaluated.The statistical analysis showed that only“the percentage of lignin”did not influence the properties of the liquefied products,however,reaction time and catalyst load were important parameters.The resulting liquefied products were characterized by FTIR analysis.
基金Project(50925417) supported by the National Funds for Distinguished Young Scientists,ChinaProject(50830301) supported by the Key program of the National Natural Science Foundation of ChinaProject(2012BAC12B03) supported by the National 12th Five-year Plan for Science and Technology Support,China
文摘A newly isolated bacterium was screened out for its survival on medium with 6 000 mg/L kraft lignin as the sole carbon source and energy,and identified as Pandoraea sp.by 16S rRNA gene sequence analysis.The biodegradation experiment was carried out in mineral salt medium,containing 5 000 mg/L kraft lignin as only carbon and energy at pH 8.0 and 30 °C.Under these conditions,significant reduction in color and lignin content by the strain was observed after incubation for 5 d.The strain attains maximum reduction capability in color(44.6%) and lignin content(39.9%) within 5 d of incubation,and reduced chemical oxygen demand(COD) from initial concentration 7 399 to 3 980 mg/L at maximum reduction level of 46.2% on the 4th day.The total ion chromatograph(TIC) of compounds presented in the chloroform extract of control and bacterial treated samples shows the formation of several lignin-related aromatic compounds including some small molecular lignin fragments,indicating a strong destruction in the lignin structure.
文摘When washed pulps is milled and ground to a fine powder, the resulting material may easily be degraded by cellulolytic enzymes. The klason and UV lignin content of the solid residuals obtained in this step were 49.9 % lignin for spruce KP, and 21.4 % for poplar KP. The solid residuals from enzymatic treatment contained about 93.3 % and 90.7 % of the lignin originally presented in the spruce KP and poplar KP respectively. The enzymatic treated residual was then subjected to mild acidolysis, which caused the cleavage of lignin-carbohydrate linkages. The resulting Ground Enzymatic/Acidolysis Kraft Lignin (GEA-KL) is of significantly higher yield than our previous two-step (enzymatic/acidolysis) residual kraft lignin (EA-KL). The improved method offers kraft lignin preparations in higher yield and purity than any other known method with minimal work up and solvent requirements. DFRC/quantitative 31P NMR protocol and quantitative DEPT edited 13C RMR were used for characterizing of RKLs.
基金This research was funded by the National Natural Science Foundation of China(No.21978104)the Program for the National Key Research and Development Program of China(No.2021YFC2101601).
文摘Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High-grade dissolving pulp was prepared from eucalyptus using a combination of extremely low acid(ELA)pretreatment,Kraft cooking,and elementary chlorine-free(ECF)bleaching.The obtained pre-hydrolysate was catalytic conversion into furfural in a biphasic system,and lignin during Kraft cooking and ECF was recovered.The process condition was discussed as well as the mass flow direction.The results showed that ELA pretreatment could effectively remove 80.1%hemicellulose.Compared with traditional hydrothermal pretreatment,the ELA pretreatment significantly increased the xylose yield from 5.05 to 14.18 g/L at 170℃ for 2 h,which had practical significance for furfural production.The 82.7%furfural yield and 82.9%furfural selectivity were obtained from xylose-rich pre-hydrolysate using NaCl as a phase modifier in a biphasic system with 4-methyl-2-pentanone(MIBK)as an organic phase by ion exchange resin catalysts at 190℃ for 2 h.Subsequently,the pretreated eucalyptus was subjected to Kraft cooking,and the optimal alkali amount was 14%.Then,the Kraft pulp was bleached using the O-D1-EP-D_(2) sequence,and dissolving pulp was obtained with an ISO brightness of 86.0%,viscosity of 463 mL/g,andα-cellulose content of 95.4%.The Kraft lignin which has a potential application was investigated by 2D-HSQC NMR and 31P NMR.The results showed that the S/G ratio of Kraft lignin was 1.93,and the content of phenolic hydroxyl groups was 2.53 mmol/g.Moreover,based on the above proposed process,30.5 g dissolving pulp,5.5 g furfural,and 21.2 g lignin per 100 g eucalyptus chips(oven dry)were produced.This research will provide new catalysis and pulping technical routes for dissolving pulp,furfural,and Kraft lignin products,which are in great demand in the chemical industry.
基金financial assistance from Department of Science and Technology (DST) vide sanction order No. F. No SB/50/ BB-0042/2013 for project and UGC Kothari fellowship to Dr. Sangeeta Yadav is highly acknowledged
文摘In order to search the degradability of kraft lignin, the potential bacterial strains Bacillus subtilis(GU193980) and Klebsiella pneumoniae(GU193981) were isolated, screened and applied in axenic and co-culture conditions. Results revealed that mixed culture showed better decolorization efficiency(80%) and reduction of pollution parameters(COD 73% and BOD62%) than axenic culture. This indicated syntrophic growth of these two bacteria rather than any antagonistic effect. The HPLC analysis of degraded samples of kraft lignin has shown the reduction in peak area compared to control, suggesting that decrease in color intensity might be largely attributed to the degradation of lignin by isolated bacteria.Further, the GC–MS analysis showed that most of the compounds detected in control were diminished after bacterial treatment. Further, the seed germination test using Phaseolus aureus has supported the detoxification of bacterial decolorized kraft lignin for environmental safety. All these observations have revealed that the developed bacterial co-culture was capable for the effective degradation and decolorization of lignin containing rayon grade pulp mill wastewater for environmental safety.
