It has always been challenging work to reconcile the contradiction between the strength and plasticity of titanium materials.Laser powder bed fusion(LPBF) is a convenient method to fabricate innovative composites incl...It has always been challenging work to reconcile the contradiction between the strength and plasticity of titanium materials.Laser powder bed fusion(LPBF) is a convenient method to fabricate innovative composites including those inspired by gradient layered materials.In this work,we used LPBF to selectively prepare Ti N/Ti gradient layered structure(GLSTi)composites by using different N_(2)–Ar ratios during the LPBF process.We systematically investigated the mechanisms of in-situ synthesis Ti N,high strength and ductility of GLSTi composites using microscopic analysis,TEM characterization,and tensile testing with digital image correlation.Besides,a digital correspondence was established between the N_(2) concentration and the volume fraction of LPBF in-situ synthesized Ti N.Our results show that the GLSTi composites exhibit superior mechanical properties compared to pure titanium fabricated by LPBF under pure Ar.Specifically,the tensile strength of GLSTi was more than 1.5times higher than that of LPBF-formed pure titanium,reaching up to 1100 MPa,while maintaining a high elongation at fracture of 17%.GLSTi breaks the bottleneck of high strength but low ductility exhibited by conventional nanoceramic particle-strengthened titanium matrix composites,and the hetero-deformation induced strengthening effect formed by the Ti N/Ti layered structure explained its strength-plasticity balanced principle.The microhardness exhibits a jagged variation of the relatively low hardness of 245 HV0.2 for the pure titanium layer and a high hardness of 408 HV0.2 for the N_(2) in-situ synthesis layer.Our study provides a new concept for the structure-performance digital customization of 3D-printed Ti-based composites.展开更多
The formation of periodic layered structure in Ni3Si/Zn diffusion couples with Zn in vapor or liquid state was investigated by SEM-EDS, FESEM and XRD. The results show that the diffusion path in solid-liquid reaction ...The formation of periodic layered structure in Ni3Si/Zn diffusion couples with Zn in vapor or liquid state was investigated by SEM-EDS, FESEM and XRD. The results show that the diffusion path in solid-liquid reaction is Ni3Si/（T＋γ）/γ/…T/γ/Ni4Zn12Si3/γ/…Ni4Zn12Si3/γ/Ni4Zn12Si3/δ…/Ni4Zn12Si3/δ/liquid-Zn, and the diffusion path in solid-vapor reaction is Ni3Si/θ/（T＋γ）/γ/…/T/γ/…T/γ/vapor-Zn. With increasing Zn diffusion flux, the diffusion reaction path moves toward the Zn-rich direction, and the distance from the Ni3Si substrate to the periodic layer pair nearest to the interface decreases. In the initial stage of both reactions,γphase nucleates and grows within T matrix phase at first, and then conjuncts together to form a band to reduce the surface energy. Based on the experimental results and diffusion kinetics analysis, the microstructure differences were compared and the formation mechanism of the periodic layered structure in Ni3Si/Zn system was discussed.展开更多
This paper investigates shear horizontal （SH） waves propagating in a periodically layered structure that consists of piezoelectric （PE） layers perfectly bonded with piezomagnetic （PM） layers alternately. The exp...This paper investigates shear horizontal （SH） waves propagating in a periodically layered structure that consists of piezoelectric （PE） layers perfectly bonded with piezomagnetic （PM） layers alternately. The explicit dispersion relations are derived for the two cases when the propagation directions of SH waves are normal to the interface and parallel to the interface, respectively. The asymptotic expressions for dispersion relations are also given when the wave number is extremely small. Numerical results for stop band effect and phase velocity are presented for a periodic system of alternating BaTiO3 and Terfenol-D layers. The influence of volume fraction on stop band effect and dispersion behaviors is discussed and revealed.展开更多
The transient fracture behavior of a functionally graded layered structure subjected to an in-plane impact load is investigated. The studied structure is composed of two homogeneous layers and a functionally gradedint...The transient fracture behavior of a functionally graded layered structure subjected to an in-plane impact load is investigated. The studied structure is composed of two homogeneous layers and a functionally gradedinterlayer with a crack perpendicular to the boundaries. The impact load is applied on the face of the crack. Fourier transform and Laplace transform methods are used to formulate the present problem in terms of a singular integral equation in Laplace transform domain. Considering variations of parameters such as the nonhomogeneity constant, the thickness ratio and the crack length, the dynamic stress intensity factors （DSIFs） in time domain are studied and some meaningful conclusions are obtained.展开更多
Luquire et al. ' s impedance change model of a rectangular cross section probe coil above a structure with an arbitrary number of parallel layers was used to study the principle of measuring thicknesses of multi-l...Luquire et al. ' s impedance change model of a rectangular cross section probe coil above a structure with an arbitrary number of parallel layers was used to study the principle of measuring thicknesses of multi-layered structures in terms of eddy current testing voltage measurements. An experimental system for multi-layered thickness measurement was developed and several fitting models to formulate the relationships between detected impedance/voltage measurements and thickness are put forward using least square method. The determination of multi-layered thicknesses was investigated after inversing the voltage outputs of the detecting system. The best fitting and inversion models are presented.展开更多
Hydrodeoxygenation（HDO） is an effective alternative to produce value-added chemicals and liquid fuels by removing oxygen from lignin-derived compounds. Sulfide catalysts have been proved to have good activity for th...Hydrodeoxygenation（HDO） is an effective alternative to produce value-added chemicals and liquid fuels by removing oxygen from lignin-derived compounds. Sulfide catalysts have been proved to have good activity for the HDO and particularly high selectivity to phenolic products. Herein, we presented a novel way to prepare the layered structure sulfide catalysts（MgFeMo-S） derived from MgFe hydrotalcites via the intercalation of Mo in consideration of the memory effect of the calcined hydrotalcite. By varying the Mg/Fe mole ratio, a series of MgFeMo-S catalysts were successfully prepared and characterized by nitrogen adsorption/desorption isotherms, X-ray diffraction（XRD）, transmission electron microscopy（TEM）,and inductively coupled plasma optical emission spectrometer（ICP-OES）. The characterization results indicated that the MgFeMo-S catalyst has retained the unique layered structure, which can facilitate uniform dispersion of the MoS2 species on both the surface and interlayer of the catalysts. For the HDO of eugenol, the Mg1Fe2Mo-S catalysts exhibited the best HDO activity among all the catalysts due to its higher active metal contents and larger pore size. The HDO conversion was 99.6% and the yield of phenolics was 63.7%, under 5 MPa initial H2 pressure（measured at RT） at 300 ℃ for 3 h. More importantly,MoS2 species deposited on the interlayer galleries in the MgFeMo-S catalysts resulted in dramatically superior HDO activity to MoS2/Mg1Fe2-S catalyst. Based on the mechanism investigation for eugenol, the HDO reaction route of eugenol under sulfide catalytic system has been proposed for the first time. Further applicability of the catalyst on HDO of more lignin-derived compounds was operated, which showed good HDO activity and selectivity to produce aromatic products.展开更多
The anisotropy of magnetostatic surface wave （MSSW） propagating in finite width YIG /dielectric/metal layered structure is analyzed. This problem is solved by finding the rigorous solution of each layer from Maxwell...The anisotropy of magnetostatic surface wave （MSSW） propagating in finite width YIG /dielectric/metal layered structure is analyzed. This problem is solved by finding the rigorous solution of each layer from Maxwell equation and the appropriate transmission Green＇s function matrix G. From the relationship of Green＇s function matrixes of dielectric layer and ferrite layer, the dispersion equation is obtained. The MSSW filter is designed to verify the dispersion characteristics. The experiment results are in good agreement with the calculating data from the model.展开更多
The utilization of eco-friendly,lightweight,high-efficiency and high-absorbing electromagnetic interference(EMI)shielding composites is imperative in light of the worldwide promotion of sustainable manufacturing.In th...The utilization of eco-friendly,lightweight,high-efficiency and high-absorbing electromagnetic interference(EMI)shielding composites is imperative in light of the worldwide promotion of sustainable manufacturing.In this work,magnetic poly(butyleneadipate-coterephthalate)(PBAT)microspheres were firstly synthesized via phase separation method,then PBAT composite foams with layered structure was constructed through the supercritical carbon dioxide foaming and scraping techniques.The merits of integrating ferroferric oxideloaded multi-walled carbon nanotubes(Fe3O4@MWCNTs)nanoparticles,a microcellular framework,and a highly conductive silver layer have been judiciously orchestrated within this distinctive layered configuration.Microwaves are consumed throughout the process of“absorption-reflection-reabsorption”as much as possible,which greatly declines the secondary radiation pollution.The biodegradable PBAT composite foams achieved an EMI shielding effectiveness of up to 68 dB and an absorptivity of 77%,and authenticated favorable stabilization after the tape adhesion experiment.展开更多
Energy-storage systems and their production have attracted significant interest for practical applications.Batteries are the foundation of sustainable energy sources for electric vehicles(EVs),portable electronic devi...Energy-storage systems and their production have attracted significant interest for practical applications.Batteries are the foundation of sustainable energy sources for electric vehicles(EVs),portable electronic devices(PEDs),etc.In recent decades,Lithium-ion batteries(LIBs) have been extensively utilized in largescale energy storage devices owing to their long cycle life and high energy density.However,the high cost and limited availability of Li are the two main obstacles for LIBs.In this regard,sodium-ion batteries(SIBs) are attractive alternatives to LIBs for large-scale energy storage systems because of the abundance and low cost of sodium materials.Cathode is one of the most important components in the battery,which limits cost and performance of a battery.Among the classified cathode structures,layered structure materials have attracted attention because of their high ionic conductivity,fast diffusion rate,and high specific capacity.Here,we present a comprehensive review of the classification of layered structures and the preparation of layered materials.Furthermore,the review article discusses extensively about the issues of the layered materials,namely(1) electrochemical degradation,(2) irreversible structural changes,and(3) structural instability,and also it provides strategies to overcome the issues such as elemental phase composition,a small amount of elemental doping,structural design,and surface alteration for emerging SIBs.In addition,the article discusses about the recent research development on layered unary,binary,ternary,quaternary,quinary,and senary-based O3-and P2-type cathode materials for high-energy SIBs.This review article provides useful information for the development of high-energy layered sodium transition metal oxide P2 and O3-cathode materials for practical SIBs.展开更多
Air pollution from particulate matter produced by incomplete combustion of diesel fuel has become a serious environmental pollution problem,which can be addressed by catalytic combustion.In this work,a series of K-mod...Air pollution from particulate matter produced by incomplete combustion of diesel fuel has become a serious environmental pollution problem,which can be addressed by catalytic combustion.In this work,a series of K-modified MnO_(δ)catalysts with different microstructures were synthesized by the hydrothermal method,the relationship between structure of the catalysts and their catalytic performance for soot combustion was studied by characterization techniques and density functional theory(DFT)calculations.Results showed that the prepared catalysts had good catalytic performance for soot combustion and could completely oxidize soot at temperatures below 400℃.The cryptomelane-type K_(2−x)Mn_(8)O_(16)(K-OMS-2)with tunnel structure had excellent NO oxidation capacity and abundance of Mn^(4+)ions(Mn^(4+)/Mn^(3+)=1.24)with good redox ability,it demonstrated better soot combustion performance than layered birnessite-type K_(2)Mn_(4)O_(8)(K-OL-1).The T_(10),T_(50),T_(90)temperatures of KOMS-2 were 269,314,346℃,respectively.The K-OMS-2 catalyst also showed excellent stability after five catalytic cycles,with T_(10),T_(50),T_(90)values holding in the ranges of 270±2,316±2,348±3℃,respectively.展开更多
The unique columnar structure endows thermal barrier coatings(TBCs)prepared by plasma spray-physical vapor deposition(PS-PVD)with high thermal insulation and long lifetime.However,the coating delamination failure resu...The unique columnar structure endows thermal barrier coatings(TBCs)prepared by plasma spray-physical vapor deposition(PS-PVD)with high thermal insulation and long lifetime.However,the coating delamination failure resulting from an intra-column fracture(within a column rather than between columns)is a bottleneck in the solid dust particle impact environment for aero-engine.To clarify the intra-column fracture mechanism,a basic layer deposition model is developed to explore a heterogeneous weak-to-strong layered structure formed by a local transient in-situ deposit temperature.During the PS-PVD,an in-situ deposit surface is continuously updated due to constantly being covered by vapor condensation,showing a transient temperature,which means that the in-situ deposit surface temperature rises sharply in short period of 0.2 s of depositing a thin layer during a single pass.Meanwhile,the increasing temperature of the in-situ deposit surface results in an experimentally observed heterogeneous weak-to-strong structure,showing a continuous transition from a porous weak structure at the bottom region to a dense strong structure at the top region.This structure easily makes the intra-column fracture at the porous weak region.The results shed light on improving TBC lifetime by restraining the intra-column fracture.展开更多
Thin-film bulk acoustic resonators(FBARs)operating with essentially thickness-extensional mode have been widely used in communication fields.In this paper,we provide a convenient means for analyzing FBARs with sandwic...Thin-film bulk acoustic resonators(FBARs)operating with essentially thickness-extensional mode have been widely used in communication fields.In this paper,we provide a convenient means for analyzing FBARs with sandwich-layered structure by appropriately neglecting the high-order terms from 3D elasticity equations.First,for straight-crested waves,an approximate method is proposed,which can accurately describe the dispersion relation near the operating frequency range of an FBAR.Using the approximation,the optimum lateral size of a 2D model of frame-like FBAR is obtained,and the results are in good agreement with that obtained by commercial FEM software COMSOL.The approximation is further extended to variablecrested waves in order to analyze the 3D plate models for real devices.The mode shapes of 3D FBARs with and without frame-like structures are obtained.The results show that the approximation presented in this paper is of sufficient accuracy and can be used as an efficient tool for the analysis and design of FBARs.展开更多
Existing sugarcane planters are difficult to have ideal seeding trajectory and motion attitude at the same time, and the speed is difficult to meet the requirements at the critical stage, resulting in poor stability, ...Existing sugarcane planters are difficult to have ideal seeding trajectory and motion attitude at the same time, and the speed is difficult to meet the requirements at the critical stage, resulting in poor stability, which ultimately makes it impossible to ensure that the sugarcane seeding is carried out in accordance with the agronomic requirements to ensure that the cane buds are oriented toward the wall of the seeding trench. Aiming at the second-order non-circular planetary gear system pendulum seeding mechanism of the planter, the paper innovatively adopts the combination of inverse design and multi-objective layered accurate optimization to solve the problems of attitude, speed and trajectory that do not meet the requirements of fixed-attitude seeding that still exists in the process of sugarcane seeding. The second-order non-circular planetary gear system is simplified into a three-rod two-degree-of-freedom mechanism, and the radius of the pitch curve of each non-circular gear is solved inversely by actively preplanning the static trajectory of the cane seed motion and analyzing the law of motion of the rod assembly. Determining the range of cane seed attitude angles in different motion phases as the first layer optimization objective, and fine-tuning the position of static trajectory key type value points to achieve the first layer optimization. Based on the non-circular gear pitch curve obtained from optimization, the interpolation points are marked on each non-circular gear pitch curve of the second-order non-circular planetary gear system, and based on the parameter optimization method of human-computer interaction, the radius values corresponding to the interpolation points of the non-circular gear pitch curve are fine-tuned to optimize the pitch curves, so as to satisfy the speed requirements of the cane species in each stage, and at the same time to make the convexity of non-circular gears in line with the principle of gear mesh, so as to complete the second layer of accurate optimization. The results of simulation verification show that the motion trajectory attitude of the virtual prototype is basically consistent with the theoretical model, which verifies the feasibility of the mechanism design. This study provides a new optimized design method for the cane seeding mechanism of sugarcane planters to achieve directional seeding.展开更多
The balance between cationic redox and oxygen redox in layer-structured cathode materials is an important issue for sodium batteries to obtain high energy density and considerable cycle stability.Oxygen redox can cont...The balance between cationic redox and oxygen redox in layer-structured cathode materials is an important issue for sodium batteries to obtain high energy density and considerable cycle stability.Oxygen redox can contribute extra capacity to increase energy density,but results in lattice instability and capacity fading caused by lattice oxygen gliding and oxygen release.In this work,reversible Mn^(2+)/Mn^(4+)redox is realized in a P3-Na_(0.65)Li_(0.2)Co_(0.05)Mn_(0.75)O_(2)cathode material with high specific capacity and structure stability via Co substitution.The contribution of oxygen redox is suppressed significantly by reversible Mn^(2+)/Mn^(4+)redox without sacrificing capacity,thus reducing lattice oxygen release and improving the structure stability.Synchrotron X-ray techniques reveal that P3 phase is well maintained in a wide voltage window of 1.5-4.5 V vs.Na^(+)/Na even at 10 C and after long-term cycling.It is disclosed that charge compensation from Co/Mn-ions contributes to the voltage region below 4.2 V and O-ions contribute to the whole voltage range.The synergistic contributions of Mn^(2+)/Mn^(4+),Co^(2+)/Co^(3+),and O^(2-)/(O_n)^(2-)redox in P3-Na_(0.65)Li_(0.2)Co_(0.05)Mn_(0.75)O_(2)lead to a high reversible capacity of 215.0 m A h g^(-1)at 0.1 C with considerable cycle stability.The strategy opens up new opportunities for the design of high capacity cathode materials for rechargeable batteries.展开更多
In this study,we performed first-principles calculations using the VASP(Vienna Ab initio Simulation)software package to investigate the crystal structure,electronic structure,and optical properties of a new layered te...In this study,we performed first-principles calculations using the VASP(Vienna Ab initio Simulation)software package to investigate the crystal structure,electronic structure,and optical properties of a new layered ternary metal chalcogenide,Eu_(2)InTe_(5).Our results show that Eu_(2)InTe_(5) is a non-zero-gap metal with a layered structure characterized by strong intra-layer atomic bonding and weak inter-layer interaction,which suggests its potential application as a nanomaterial.We also studied the optical properties,including the absorption coefficient,imaginary and real parts of the complex dielectric constant,and found that Eu_(2)InTe_(5) exhibits strong photoresponse characteristics at the junction of ultraviolet and visible light as well as blue-green light,with peaks at wavelengths of 389 nm and 477 nm.This suggests that it could be used in the development of UV(ultraviolet)detectors and other optoelectronic devices.Furthermore,due to its strong absorption,low loss,and low reflectivity,Eu_(2)InTe_(5) has the potential to be used as a promising photovoltaic absorption layer in solar cells.展开更多
Dissimilar high-energy beam(HEB)welding is necessary in many industrial applications.Different composition of heat-affected zone(HAZ)and weld metal(WM)lead to variation in mechanical properties within the dissimilar j...Dissimilar high-energy beam(HEB)welding is necessary in many industrial applications.Different composition of heat-affected zone(HAZ)and weld metal(WM)lead to variation in mechanical properties within the dissimilar joint,which determines the performance of the welded structure.In the present study,appropriate filler material was used during electron beam welding(EBW)to obtain a reliable dissimilar joint between reduced-activation ferritic-martensitic(RAFM)steel and 316L austenitic stainless steel.It was observed that the layered structure occurred in the weld metal with 310S filler(310S-WM),which had the inferior resistance to thermal disturbance,leading to severe hardening of 310S-WM after one-step tempering treatment.To further ameliorate the joint inhomogeneity,two-step heat treatment processes were imposed to the joints and optimized.δ-ferrite in the layered structure transformed intoγ-phase in the first-step normalizing and remained stable during cooling.In the second-step of tempering,tempered martensite was obtained in the HAZ of the RAFM steel,while the microstructure of 310S-WM was not affected.Thus,the optimized properties for HAZ and 310S-WM in dissimilar welded joint was both obtained by a two-step heat treatment.The creep failure position of two dissimilar joints both occurred in CLAM-BM.展开更多
A review of the periodic layered structure （PLS） formed during reactive diffusion was presented. The formation of PLS is a very interesting and complex phenomenon during the reactive diffusion process. It was firstl...A review of the periodic layered structure （PLS） formed during reactive diffusion was presented. The formation of PLS is a very interesting and complex phenomenon during the reactive diffusion process. It was firstly discovered occasionally. The formation of PLS has been reported in various solid state diffusion couples such as Zn/ Ni3 Si, Mg/SiO2, Zn/Cux Tiy and so on, and some controversial theoretical models and formation mechanism of PLS were put forward. However, there have been few reports about the PLS formed during hot dip. The development of PLS was reviewed, and the recent progress referring to the formation of PLS during the hot dip aluminizing of a no- vel Fe-Cr-B cast steel was especially introduced. However, not all of the borides could form PLS in their interracial reaction with molten Al. PLS only formed at the Cr-rich Fe2B/Al interface, while Mo-rich Fe2B fractured. A general qualitative description for the interracial reaction of Fe-Cr-B cast steel with molten Al was represented. Further inves- tigation on the constituents of the alternating phases and formation mechanism of PLS needs to be done. At last, the development trends of PLS were proposed.展开更多
Investigation of infiltration through unsaturated zone which consists of both porous and fractured media is important for comprehensively understanding water circulation and effectively man- aging groundwater resource...Investigation of infiltration through unsaturated zone which consists of both porous and fractured media is important for comprehensively understanding water circulation and effectively man- aging groundwater resources and contamination control. Infiltration experiments for three kinds of porous-fractured layered structures were conducted with application of a rainfall simulator in this in- vestigation. During experiments, the volumetric water contents of porous media and on the interface of porous-fractured media were monitored by moisture sensors （TDT）. The infiltration rate, water amount in the profile and on the interface between the soil and the fractured bedrock, and outflow from the layered structures were analyzed to identify the effects of porous-fractured interface on water movement in the upper porous media and the effects of various kinds of porous media on infiltration in fractured rocks. It has been observed from the experiment results that the porous media and the frac- tured rock bear considerable reciprocal impact each other on infiltration processes and water content distribution. The results showed fractured rock prevented vertical water movement in the layered structure, and it decreases infiltration rate of layered structure and slows the process for upper porous media saturation.展开更多
The present paper presents an innovative approach for the numerical modeling of piezo-electric transducers for the health-monitoring of layered structures.The numerical approach has been developed in the frameworks of...The present paper presents an innovative approach for the numerical modeling of piezo-electric transducers for the health-monitoring of layered structures.The numerical approach has been developed in the frameworks of the Carrera Unified Formulation.This computa-tional tool allows refined numerical models to be derived in a unified and efficient fashion.The use of higher-order models and the cap-ability to connect different kinematic models using the node-depen-dent kinematic approach has led to an efficient modeling technique for global-local analysis.This approach can refine the model only in those regions where it is required,e.g.,the areas where piezo-electric transducers are placed.The model has been used to study embedded and surface-mounted sensors.The accuracy of the pre-sent model has been verified by comparing the current results with numerical and experimental data from the literature.Different mod-eling solutions have been developed,mixing one-,two-and threedimensional finite elements.The results show that the use of the present modeling technique allows the computational cost to be reduced with respect to the classical approaches preserving the ccuracy of the results in the critical areas.展开更多
The title compound was synthesized by high temperature reaction of elements. TaNi_2Te_3, M_r= 681. 15, crystallizes in space group P2_1/m with dimensions a =7. 473(2), b=3. 708(1), c=10. 074(2) A, β=106. 78(2)°,...The title compound was synthesized by high temperature reaction of elements. TaNi_2Te_3, M_r= 681. 15, crystallizes in space group P2_1/m with dimensions a =7. 473(2), b=3. 708(1), c=10. 074(2) A, β=106. 78(2)°, V=267. 3(1) A￣3,Z= 2, D_c= 8. 46 g ·cm￣(-3), P=431. 43 cm￣(-1), F(000) = 570, T= 296K. The structure has been refined to final R = 0. 053 for 963 observations. This layered structure contains square-pyramidal Ta atoms and tetrahedral Ni atoms each coordinated by Te atoms. The layered structure may be considered as chain units ∞￣1[Ta_2Ni_2Te_6], which are linked by zigzag chains ∞￣1[Ni]. The title compound possesses a two-dimensional metal cluster. The structural relationship between this compound and its related compounds is discussed, and this is helpful for designing and synthesizing new layered compounds.展开更多
基金supported by the Guangdong Basic and Applied Basic Research Foundation (2020B1515120013,2022B1515120066)National Natural Science Foundation of China (Nos.U2001218, 51875215)+1 种基金Key-Area Research and Development Program of Guangdong Province (2020B090923001)Special Support Foundation of Guangdong Province (No.2019TQ05Z110)。
文摘It has always been challenging work to reconcile the contradiction between the strength and plasticity of titanium materials.Laser powder bed fusion(LPBF) is a convenient method to fabricate innovative composites including those inspired by gradient layered materials.In this work,we used LPBF to selectively prepare Ti N/Ti gradient layered structure(GLSTi)composites by using different N_(2)–Ar ratios during the LPBF process.We systematically investigated the mechanisms of in-situ synthesis Ti N,high strength and ductility of GLSTi composites using microscopic analysis,TEM characterization,and tensile testing with digital image correlation.Besides,a digital correspondence was established between the N_(2) concentration and the volume fraction of LPBF in-situ synthesized Ti N.Our results show that the GLSTi composites exhibit superior mechanical properties compared to pure titanium fabricated by LPBF under pure Ar.Specifically,the tensile strength of GLSTi was more than 1.5times higher than that of LPBF-formed pure titanium,reaching up to 1100 MPa,while maintaining a high elongation at fracture of 17%.GLSTi breaks the bottleneck of high strength but low ductility exhibited by conventional nanoceramic particle-strengthened titanium matrix composites,and the hetero-deformation induced strengthening effect formed by the Ti N/Ti layered structure explained its strength-plasticity balanced principle.The microhardness exhibits a jagged variation of the relatively low hardness of 245 HV0.2 for the pure titanium layer and a high hardness of 408 HV0.2 for the N_(2) in-situ synthesis layer.Our study provides a new concept for the structure-performance digital customization of 3D-printed Ti-based composites.
基金Projects(51271040,51171031)supported by the National Natural Science Foundation of ChinaProject supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘The formation of periodic layered structure in Ni3Si/Zn diffusion couples with Zn in vapor or liquid state was investigated by SEM-EDS, FESEM and XRD. The results show that the diffusion path in solid-liquid reaction is Ni3Si/（T＋γ）/γ/…T/γ/Ni4Zn12Si3/γ/…Ni4Zn12Si3/γ/Ni4Zn12Si3/δ…/Ni4Zn12Si3/δ/liquid-Zn, and the diffusion path in solid-vapor reaction is Ni3Si/θ/（T＋γ）/γ/…/T/γ/…T/γ/vapor-Zn. With increasing Zn diffusion flux, the diffusion reaction path moves toward the Zn-rich direction, and the distance from the Ni3Si substrate to the periodic layer pair nearest to the interface decreases. In the initial stage of both reactions,γphase nucleates and grows within T matrix phase at first, and then conjuncts together to form a band to reduce the surface energy. Based on the experimental results and diffusion kinetics analysis, the microstructure differences were compared and the formation mechanism of the periodic layered structure in Ni3Si/Zn system was discussed.
基金supported by the National Natural Science Foundation of China (Nos.10672108,10572069 and 10820101048)
文摘This paper investigates shear horizontal （SH） waves propagating in a periodically layered structure that consists of piezoelectric （PE） layers perfectly bonded with piezomagnetic （PM） layers alternately. The explicit dispersion relations are derived for the two cases when the propagation directions of SH waves are normal to the interface and parallel to the interface, respectively. The asymptotic expressions for dispersion relations are also given when the wave number is extremely small. Numerical results for stop band effect and phase velocity are presented for a periodic system of alternating BaTiO3 and Terfenol-D layers. The influence of volume fraction on stop band effect and dispersion behaviors is discussed and revealed.
基金the National Science Foundation for Excellent Young Investigators(10325208)the National Natural Science Foundation of China(10432030)the China Postdoctoral Science Foundation(2004036018)
文摘The transient fracture behavior of a functionally graded layered structure subjected to an in-plane impact load is investigated. The studied structure is composed of two homogeneous layers and a functionally gradedinterlayer with a crack perpendicular to the boundaries. The impact load is applied on the face of the crack. Fourier transform and Laplace transform methods are used to formulate the present problem in terms of a singular integral equation in Laplace transform domain. Considering variations of parameters such as the nonhomogeneity constant, the thickness ratio and the crack length, the dynamic stress intensity factors （DSIFs） in time domain are studied and some meaningful conclusions are obtained.
文摘Luquire et al. ' s impedance change model of a rectangular cross section probe coil above a structure with an arbitrary number of parallel layers was used to study the principle of measuring thicknesses of multi-layered structures in terms of eddy current testing voltage measurements. An experimental system for multi-layered thickness measurement was developed and several fitting models to formulate the relationships between detected impedance/voltage measurements and thickness are put forward using least square method. The determination of multi-layered thicknesses was investigated after inversing the voltage outputs of the detecting system. The best fitting and inversion models are presented.
基金supported by the National Natural Science Foundation of China (Grant nos. 21503144, 21406165, 51506147, 21376239)Major Projects of the National Natural Science Foundation of China (21690083)Tianjin Research Program of Application Foundation and Advanced Technique (Nos.16JCQNJC05400, 15JCQNJC08500)
文摘Hydrodeoxygenation（HDO） is an effective alternative to produce value-added chemicals and liquid fuels by removing oxygen from lignin-derived compounds. Sulfide catalysts have been proved to have good activity for the HDO and particularly high selectivity to phenolic products. Herein, we presented a novel way to prepare the layered structure sulfide catalysts（MgFeMo-S） derived from MgFe hydrotalcites via the intercalation of Mo in consideration of the memory effect of the calcined hydrotalcite. By varying the Mg/Fe mole ratio, a series of MgFeMo-S catalysts were successfully prepared and characterized by nitrogen adsorption/desorption isotherms, X-ray diffraction（XRD）, transmission electron microscopy（TEM）,and inductively coupled plasma optical emission spectrometer（ICP-OES）. The characterization results indicated that the MgFeMo-S catalyst has retained the unique layered structure, which can facilitate uniform dispersion of the MoS2 species on both the surface and interlayer of the catalysts. For the HDO of eugenol, the Mg1Fe2Mo-S catalysts exhibited the best HDO activity among all the catalysts due to its higher active metal contents and larger pore size. The HDO conversion was 99.6% and the yield of phenolics was 63.7%, under 5 MPa initial H2 pressure（measured at RT） at 300 ℃ for 3 h. More importantly,MoS2 species deposited on the interlayer galleries in the MgFeMo-S catalysts resulted in dramatically superior HDO activity to MoS2/Mg1Fe2-S catalyst. Based on the mechanism investigation for eugenol, the HDO reaction route of eugenol under sulfide catalytic system has been proposed for the first time. Further applicability of the catalyst on HDO of more lignin-derived compounds was operated, which showed good HDO activity and selectivity to produce aromatic products.
基金This work was supported by the National Basic Research Program of China (973) under Grant No. 2007CB31407the International S&T Cooperation Program of China under Grant No. 2006DFA53410.
文摘The anisotropy of magnetostatic surface wave （MSSW） propagating in finite width YIG /dielectric/metal layered structure is analyzed. This problem is solved by finding the rigorous solution of each layer from Maxwell equation and the appropriate transmission Green＇s function matrix G. From the relationship of Green＇s function matrixes of dielectric layer and ferrite layer, the dispersion equation is obtained. The MSSW filter is designed to verify the dispersion characteristics. The experiment results are in good agreement with the calculating data from the model.
基金This work was supported by the National Natural Science Foundation of China(No.U21A2093)the Anhui Provincial Natural Science Foundation(No.2308085QE146)the National Natural Science Foundation of Jiangsu Province(No.BK20210894).
文摘The utilization of eco-friendly,lightweight,high-efficiency and high-absorbing electromagnetic interference(EMI)shielding composites is imperative in light of the worldwide promotion of sustainable manufacturing.In this work,magnetic poly(butyleneadipate-coterephthalate)(PBAT)microspheres were firstly synthesized via phase separation method,then PBAT composite foams with layered structure was constructed through the supercritical carbon dioxide foaming and scraping techniques.The merits of integrating ferroferric oxideloaded multi-walled carbon nanotubes(Fe3O4@MWCNTs)nanoparticles,a microcellular framework,and a highly conductive silver layer have been judiciously orchestrated within this distinctive layered configuration.Microwaves are consumed throughout the process of“absorption-reflection-reabsorption”as much as possible,which greatly declines the secondary radiation pollution.The biodegradable PBAT composite foams achieved an EMI shielding effectiveness of up to 68 dB and an absorptivity of 77%,and authenticated favorable stabilization after the tape adhesion experiment.
基金supported by a grant from the Subway Fine Dust Reduction Technology Development Project of the Ministry of Land Infrastructure and Transport,Republic of Korea(21QPPWB152306-03)the Basic Science Research Capacity Enhancement Project through a Korea Basic Science Institute(National Research Facilities and Equipment Center)grant funded by the Ministry of Education of the Republic of Korea(2019R1A6C1010016)。
文摘Energy-storage systems and their production have attracted significant interest for practical applications.Batteries are the foundation of sustainable energy sources for electric vehicles(EVs),portable electronic devices(PEDs),etc.In recent decades,Lithium-ion batteries(LIBs) have been extensively utilized in largescale energy storage devices owing to their long cycle life and high energy density.However,the high cost and limited availability of Li are the two main obstacles for LIBs.In this regard,sodium-ion batteries(SIBs) are attractive alternatives to LIBs for large-scale energy storage systems because of the abundance and low cost of sodium materials.Cathode is one of the most important components in the battery,which limits cost and performance of a battery.Among the classified cathode structures,layered structure materials have attracted attention because of their high ionic conductivity,fast diffusion rate,and high specific capacity.Here,we present a comprehensive review of the classification of layered structures and the preparation of layered materials.Furthermore,the review article discusses extensively about the issues of the layered materials,namely(1) electrochemical degradation,(2) irreversible structural changes,and(3) structural instability,and also it provides strategies to overcome the issues such as elemental phase composition,a small amount of elemental doping,structural design,and surface alteration for emerging SIBs.In addition,the article discusses about the recent research development on layered unary,binary,ternary,quaternary,quinary,and senary-based O3-and P2-type cathode materials for high-energy SIBs.This review article provides useful information for the development of high-energy layered sodium transition metal oxide P2 and O3-cathode materials for practical SIBs.
基金the Key Research and Development Program of MOST(No.2017YFE0131200)for collaboration between China and Polandthe National Natural Science Foundation of China(Nos.22072095 and U1908204)+5 种基金University Joint Education Project for China-Central and Eastern European Countries(No.2021097)National Engineering Laboratory for Mobile Source Emission Control Technology(No.NELMS2018A04)Liaoning Provincial central government guides local science and technology development funds(No.2022JH6/100100052)Major/Key Project of Graduate Education and Teaching Reform of Shenyang Normal University(No.YJSJG120210008/YJSJG220210022)University level innovation team of Shenyang Normal Universityand Major Incubation Program of Shenyang Normal University(No.ZD201901)。
文摘Air pollution from particulate matter produced by incomplete combustion of diesel fuel has become a serious environmental pollution problem,which can be addressed by catalytic combustion.In this work,a series of K-modified MnO_(δ)catalysts with different microstructures were synthesized by the hydrothermal method,the relationship between structure of the catalysts and their catalytic performance for soot combustion was studied by characterization techniques and density functional theory(DFT)calculations.Results showed that the prepared catalysts had good catalytic performance for soot combustion and could completely oxidize soot at temperatures below 400℃.The cryptomelane-type K_(2−x)Mn_(8)O_(16)(K-OMS-2)with tunnel structure had excellent NO oxidation capacity and abundance of Mn^(4+)ions(Mn^(4+)/Mn^(3+)=1.24)with good redox ability,it demonstrated better soot combustion performance than layered birnessite-type K_(2)Mn_(4)O_(8)(K-OL-1).The T_(10),T_(50),T_(90)temperatures of KOMS-2 were 269,314,346℃,respectively.The K-OMS-2 catalyst also showed excellent stability after five catalytic cycles,with T_(10),T_(50),T_(90)values holding in the ranges of 270±2,316±2,348±3℃,respectively.
基金supported by the National Natural Science Foundation of China (No.51901175)the China Postdoctoral Science Foundation Funded Project (No.2020T130499)the National Program for Support of Top-notch Young Professionals.
文摘The unique columnar structure endows thermal barrier coatings(TBCs)prepared by plasma spray-physical vapor deposition(PS-PVD)with high thermal insulation and long lifetime.However,the coating delamination failure resulting from an intra-column fracture(within a column rather than between columns)is a bottleneck in the solid dust particle impact environment for aero-engine.To clarify the intra-column fracture mechanism,a basic layer deposition model is developed to explore a heterogeneous weak-to-strong layered structure formed by a local transient in-situ deposit temperature.During the PS-PVD,an in-situ deposit surface is continuously updated due to constantly being covered by vapor condensation,showing a transient temperature,which means that the in-situ deposit surface temperature rises sharply in short period of 0.2 s of depositing a thin layer during a single pass.Meanwhile,the increasing temperature of the in-situ deposit surface results in an experimentally observed heterogeneous weak-to-strong structure,showing a continuous transition from a porous weak structure at the bottom region to a dense strong structure at the top region.This structure easily makes the intra-column fracture at the porous weak region.The results shed light on improving TBC lifetime by restraining the intra-column fracture.
基金supported by the National Natural Science Foundation of China(12061131013,11972276,12172171 and 12102183)the State Key Laboratory of Mechanics and Control of Mechanical Structures at NUAA(No.MCMS-E-0520K02)+5 种基金the Fundamental Research Funds for the Central Universities(NE2020002 and NS2019007)National Natural Science Foundation of China for Creative Research Groups(No.51921003)the Start-up Fund supported by NUAA,National Natural Science Foundation of Jiangsu Province(BK20211176)Local Science and Technology Development Fund Projects Guided by the Central Government(2021Szvup061)Jiangsu High-Level Innovative and Entrepreneurial Talents Introduction Plan(Shuangchuang Doctor Program,JSSCBS20210166)a project funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘Thin-film bulk acoustic resonators(FBARs)operating with essentially thickness-extensional mode have been widely used in communication fields.In this paper,we provide a convenient means for analyzing FBARs with sandwich-layered structure by appropriately neglecting the high-order terms from 3D elasticity equations.First,for straight-crested waves,an approximate method is proposed,which can accurately describe the dispersion relation near the operating frequency range of an FBAR.Using the approximation,the optimum lateral size of a 2D model of frame-like FBAR is obtained,and the results are in good agreement with that obtained by commercial FEM software COMSOL.The approximation is further extended to variablecrested waves in order to analyze the 3D plate models for real devices.The mode shapes of 3D FBARs with and without frame-like structures are obtained.The results show that the approximation presented in this paper is of sufficient accuracy and can be used as an efficient tool for the analysis and design of FBARs.
基金supported by The National Natural Science Foundation of China (Grant No.52265028)Guangxi Natural Science Foundation of China (Grant No.2021JJA160046).
文摘Existing sugarcane planters are difficult to have ideal seeding trajectory and motion attitude at the same time, and the speed is difficult to meet the requirements at the critical stage, resulting in poor stability, which ultimately makes it impossible to ensure that the sugarcane seeding is carried out in accordance with the agronomic requirements to ensure that the cane buds are oriented toward the wall of the seeding trench. Aiming at the second-order non-circular planetary gear system pendulum seeding mechanism of the planter, the paper innovatively adopts the combination of inverse design and multi-objective layered accurate optimization to solve the problems of attitude, speed and trajectory that do not meet the requirements of fixed-attitude seeding that still exists in the process of sugarcane seeding. The second-order non-circular planetary gear system is simplified into a three-rod two-degree-of-freedom mechanism, and the radius of the pitch curve of each non-circular gear is solved inversely by actively preplanning the static trajectory of the cane seed motion and analyzing the law of motion of the rod assembly. Determining the range of cane seed attitude angles in different motion phases as the first layer optimization objective, and fine-tuning the position of static trajectory key type value points to achieve the first layer optimization. Based on the non-circular gear pitch curve obtained from optimization, the interpolation points are marked on each non-circular gear pitch curve of the second-order non-circular planetary gear system, and based on the parameter optimization method of human-computer interaction, the radius values corresponding to the interpolation points of the non-circular gear pitch curve are fine-tuned to optimize the pitch curves, so as to satisfy the speed requirements of the cane species in each stage, and at the same time to make the convexity of non-circular gears in line with the principle of gear mesh, so as to complete the second layer of accurate optimization. The results of simulation verification show that the motion trajectory attitude of the virtual prototype is basically consistent with the theoretical model, which verifies the feasibility of the mechanism design. This study provides a new optimized design method for the cane seeding mechanism of sugarcane planters to achieve directional seeding.
基金financially supported by the National Key Scientific Research Project(2022YFB2502300)China and the National Natural Science Foundation of China(52071085)。
文摘The balance between cationic redox and oxygen redox in layer-structured cathode materials is an important issue for sodium batteries to obtain high energy density and considerable cycle stability.Oxygen redox can contribute extra capacity to increase energy density,but results in lattice instability and capacity fading caused by lattice oxygen gliding and oxygen release.In this work,reversible Mn^(2+)/Mn^(4+)redox is realized in a P3-Na_(0.65)Li_(0.2)Co_(0.05)Mn_(0.75)O_(2)cathode material with high specific capacity and structure stability via Co substitution.The contribution of oxygen redox is suppressed significantly by reversible Mn^(2+)/Mn^(4+)redox without sacrificing capacity,thus reducing lattice oxygen release and improving the structure stability.Synchrotron X-ray techniques reveal that P3 phase is well maintained in a wide voltage window of 1.5-4.5 V vs.Na^(+)/Na even at 10 C and after long-term cycling.It is disclosed that charge compensation from Co/Mn-ions contributes to the voltage region below 4.2 V and O-ions contribute to the whole voltage range.The synergistic contributions of Mn^(2+)/Mn^(4+),Co^(2+)/Co^(3+),and O^(2-)/(O_n)^(2-)redox in P3-Na_(0.65)Li_(0.2)Co_(0.05)Mn_(0.75)O_(2)lead to a high reversible capacity of 215.0 m A h g^(-1)at 0.1 C with considerable cycle stability.The strategy opens up new opportunities for the design of high capacity cathode materials for rechargeable batteries.
文摘In this study,we performed first-principles calculations using the VASP(Vienna Ab initio Simulation)software package to investigate the crystal structure,electronic structure,and optical properties of a new layered ternary metal chalcogenide,Eu_(2)InTe_(5).Our results show that Eu_(2)InTe_(5) is a non-zero-gap metal with a layered structure characterized by strong intra-layer atomic bonding and weak inter-layer interaction,which suggests its potential application as a nanomaterial.We also studied the optical properties,including the absorption coefficient,imaginary and real parts of the complex dielectric constant,and found that Eu_(2)InTe_(5) exhibits strong photoresponse characteristics at the junction of ultraviolet and visible light as well as blue-green light,with peaks at wavelengths of 389 nm and 477 nm.This suggests that it could be used in the development of UV(ultraviolet)detectors and other optoelectronic devices.Furthermore,due to its strong absorption,low loss,and low reflectivity,Eu_(2)InTe_(5) has the potential to be used as a promising photovoltaic absorption layer in solar cells.
基金supported financially by the National Magnetic Confinement Fusion Program of China (Nos.2014GB120000 and2014GB104003)the National Natural Science Foundation of China (No.51571026)
文摘Dissimilar high-energy beam(HEB)welding is necessary in many industrial applications.Different composition of heat-affected zone(HAZ)and weld metal(WM)lead to variation in mechanical properties within the dissimilar joint,which determines the performance of the welded structure.In the present study,appropriate filler material was used during electron beam welding(EBW)to obtain a reliable dissimilar joint between reduced-activation ferritic-martensitic(RAFM)steel and 316L austenitic stainless steel.It was observed that the layered structure occurred in the weld metal with 310S filler(310S-WM),which had the inferior resistance to thermal disturbance,leading to severe hardening of 310S-WM after one-step tempering treatment.To further ameliorate the joint inhomogeneity,two-step heat treatment processes were imposed to the joints and optimized.δ-ferrite in the layered structure transformed intoγ-phase in the first-step normalizing and remained stable during cooling.In the second-step of tempering,tempered martensite was obtained in the HAZ of the RAFM steel,while the microstructure of 310S-WM was not affected.Thus,the optimized properties for HAZ and 310S-WM in dissimilar welded joint was both obtained by a two-step heat treatment.The creep failure position of two dissimilar joints both occurred in CLAM-BM.
基金Item Sponsored by National Natural Science Foundation of China(51404084)Scientific Research Foundation of Hainan University of China(hyqd1629)Opening Project of Guangdong Key Laboratory for Advanced Metallic Materials Processing(South China University of Technology)of China(GJ201609)
文摘A review of the periodic layered structure （PLS） formed during reactive diffusion was presented. The formation of PLS is a very interesting and complex phenomenon during the reactive diffusion process. It was firstly discovered occasionally. The formation of PLS has been reported in various solid state diffusion couples such as Zn/ Ni3 Si, Mg/SiO2, Zn/Cux Tiy and so on, and some controversial theoretical models and formation mechanism of PLS were put forward. However, there have been few reports about the PLS formed during hot dip. The development of PLS was reviewed, and the recent progress referring to the formation of PLS during the hot dip aluminizing of a no- vel Fe-Cr-B cast steel was especially introduced. However, not all of the borides could form PLS in their interracial reaction with molten Al. PLS only formed at the Cr-rich Fe2B/Al interface, while Mo-rich Fe2B fractured. A general qualitative description for the interracial reaction of Fe-Cr-B cast steel with molten Al was represented. Further inves- tigation on the constituents of the alternating phases and formation mechanism of PLS needs to be done. At last, the development trends of PLS were proposed.
基金supported by the Major State Basic Research Development Program of China(973 Program)(No.2010CB428804)the National Natural Science Foundation of China(No.40972166)the Major Science and Technology Program for Water Pollution Control and Treatment of China(No.2009ZX07212-003)
文摘Investigation of infiltration through unsaturated zone which consists of both porous and fractured media is important for comprehensively understanding water circulation and effectively man- aging groundwater resources and contamination control. Infiltration experiments for three kinds of porous-fractured layered structures were conducted with application of a rainfall simulator in this in- vestigation. During experiments, the volumetric water contents of porous media and on the interface of porous-fractured media were monitored by moisture sensors （TDT）. The infiltration rate, water amount in the profile and on the interface between the soil and the fractured bedrock, and outflow from the layered structures were analyzed to identify the effects of porous-fractured interface on water movement in the upper porous media and the effects of various kinds of porous media on infiltration in fractured rocks. It has been observed from the experiment results that the porous media and the frac- tured rock bear considerable reciprocal impact each other on infiltration processes and water content distribution. The results showed fractured rock prevented vertical water movement in the layered structure, and it decreases infiltration rate of layered structure and slows the process for upper porous media saturation.
文摘The present paper presents an innovative approach for the numerical modeling of piezo-electric transducers for the health-monitoring of layered structures.The numerical approach has been developed in the frameworks of the Carrera Unified Formulation.This computa-tional tool allows refined numerical models to be derived in a unified and efficient fashion.The use of higher-order models and the cap-ability to connect different kinematic models using the node-depen-dent kinematic approach has led to an efficient modeling technique for global-local analysis.This approach can refine the model only in those regions where it is required,e.g.,the areas where piezo-electric transducers are placed.The model has been used to study embedded and surface-mounted sensors.The accuracy of the pre-sent model has been verified by comparing the current results with numerical and experimental data from the literature.Different mod-eling solutions have been developed,mixing one-,two-and threedimensional finite elements.The results show that the use of the present modeling technique allows the computational cost to be reduced with respect to the classical approaches preserving the ccuracy of the results in the critical areas.
文摘The title compound was synthesized by high temperature reaction of elements. TaNi_2Te_3, M_r= 681. 15, crystallizes in space group P2_1/m with dimensions a =7. 473(2), b=3. 708(1), c=10. 074(2) A, β=106. 78(2)°, V=267. 3(1) A￣3,Z= 2, D_c= 8. 46 g ·cm￣(-3), P=431. 43 cm￣(-1), F(000) = 570, T= 296K. The structure has been refined to final R = 0. 053 for 963 observations. This layered structure contains square-pyramidal Ta atoms and tetrahedral Ni atoms each coordinated by Te atoms. The layered structure may be considered as chain units ∞￣1[Ta_2Ni_2Te_6], which are linked by zigzag chains ∞￣1[Ni]. The title compound possesses a two-dimensional metal cluster. The structural relationship between this compound and its related compounds is discussed, and this is helpful for designing and synthesizing new layered compounds.
