The incorporation of boron into carbon material can significantly enhance its capacity performances.However,the origin of the promotion effect of boron doping on electrochemical performances is still unclear,in part d...The incorporation of boron into carbon material can significantly enhance its capacity performances.However,the origin of the promotion effect of boron doping on electrochemical performances is still unclear,in part due to the inadequate exposure of boron configurations resulting from the complexity of traditional carbon materials.To overcome this issue,herein,a series of boron-doped graphene with highly-exposed boron configurations are prepared by tuning annealing temperature.Then the correlation between boron configurations and the electrochemical performances is investigated.The combination of density-functional theory(DFT)computation and NH3-TPD/Py-FTIR indicates that the BCO_(2)configuration formed on the surface of graphene is easier to accept lone-pair electrons than BC_(2)O and BC_(3)configurations due to the stronger Lewis acidity.Such an electronic structure can effectively reduce the number of unstable electron donors and stabilize the electrochemical interface,which is proved by NMR,and critical for improving the electrochemical performances.Further experiments confirm that the optimized BG800 with the largest amount of BCO_(2)configuration presents ultralow leak current,improved cyclic stability,and better rate performance in SBPBF4/PC.This work would provide an insight into the design of high-performance boron-doped carbon materials towards energy storage.展开更多
Various methods have been developed to measure the strength of a Lewis acid.A major challenge for these measurements lies in the complexity that arises from variable solvent interactions and perturbations of Lewis aci...Various methods have been developed to measure the strength of a Lewis acid.A major challenge for these measurements lies in the complexity that arises from variable solvent interactions and perturbations of Lewis acids as their reaction environment changes.Herein,we investigate the impact of solvent effects on Lewis acids for the first time as measured by the fluorescent Lewis adduct(FLA)method.The binding of a Lewis acid in various solvents reveals a measurable dichotomy between both polarity and donor ability of the solvent.While not strictly separable,we observe that the influence of solvent polarity on Lewis acid unit(LAU)values is distinctly opposite to the influence of donor ability.This dichotomy was confirmed by titration data,illustrating that solvation effects can be appropriately and precisely gauged by the FLA method.展开更多
The dilute sulfuric acid pretreatment of lignocellulosic biomass is a well understood process that significantly enhances the yield of glucose after enzymatic saccharification.The goal of this research was to perform ...The dilute sulfuric acid pretreatment of lignocellulosic biomass is a well understood process that significantly enhances the yield of glucose after enzymatic saccharification.The goal of this research was to perform a systematic study to evaluate the yield of fermentable sugars during dilute sulfuric acid pretreatment that is co-catalyzed with the transition metal Lewis acid salts:AlCl_(3),FeCl_(2),FeCl_(3),and La(OTf)_(3).All Lewis acids apart from FeCl_(2)reduced the presence of xylo-oligomers by a large margin when compared to the non-co-catalyzed control sample pretreatments.The presence of these xylo-oligomers acts as inhibitors during enzymatic saccaharification step.The Lewis acids AlCl_(3),FeCl_(3),and La(OTf)_(3)were also able to marginally increase the overall enzymatic digestibility specifically for corn stover pretreated at 160℃with 10 mM of Lewis acids.The hard Lewis acid such as AlCl3 increased the formation inhibitory products such as furfural and 5-hydroxymethylfurfural(HMF).There was good correlation between reduction of xylo-oligomers and increased concentration furfural with increase in Lewis acid hardness.展开更多
Since the discovery in 2011,MXenes have become the rising star in the field of two-dimensional materials.Benefiting from the metallic-level conductivity,large and adjustable gallery spacing,low ion diffusion barrier,r...Since the discovery in 2011,MXenes have become the rising star in the field of two-dimensional materials.Benefiting from the metallic-level conductivity,large and adjustable gallery spacing,low ion diffusion barrier,rich surface chemistry,superior mechanical strength,MXenes exhibit great application prospects in energy storage and conversion,sensors,optoelectronics,electromagnetic interference shielding and biomedicine.Nevertheless,two issues seriously deteriorate the further development of MXenes.One is the high experimental risk of common preparation methods such as HF etching,and the other is the difficulty in obtaining MXenes with controllable surface groups.Recently,Lewis acidic etching,as a brand-new preparation strategy for MXenes,has attracted intensive attention due to its high safety and the ability to endow MXenes with uniform terminations.However,a comprehensive review of Lewis acidic etching method has not been reported yet.Herein,we first introduce the Lewis acidic etching from the following four aspects:etching mechanism,terminations regulation,in-situ formed metals and delamination of multi-layered MXenes.Further,the applications of MXenes and MXene-based hybrids obtained by Lewis acidic etching route in energy storage and conversion,sensors and microwave absorption are carefully summarized.Finally,some challenges and opportunities of Lewis acidic etching strategy are also presented.展开更多
β,γ-Unsaturated a-diazocarbonyl compounds possess two reactive sites for electrophilic addition-one at the diazo carbon and the other at the vinylogous γ-position.Controlled by catalyst,divergent transformations ar...β,γ-Unsaturated a-diazocarbonyl compounds possess two reactive sites for electrophilic addition-one at the diazo carbon and the other at the vinylogous γ-position.Controlled by catalyst,divergent transformations are achieved starting from the same starting materials,either by Lewis acid-catalyzed addition or by dirhodium-catalyzed metal carbene reactions.In select cases two catalysts working in combination or in sequence provide a relay for cascade transformations.In this review,we summarize advances in catalyst-dependent divergent transformations of β,γ-unsaturated α-diazocarbonyl compounds and highlight the potential of this exciting research area and the many challenges that remain.展开更多
Recent advances in photocatalysis have enabled radical methods with complementary chemoselectivity to established two electron bond forming approaches.While this radical strategy has previously been limited to substra...Recent advances in photocatalysis have enabled radical methods with complementary chemoselectivity to established two electron bond forming approaches.While this radical strategy has previously been limited to substrates with favorable redox potentials,Brønsted/Lewis acid activation has emerged as a means of facilitating otherwise difficult reductions.We report herein our investigations into the Lewis acid-promoted redox activation ofβ-ketocarbonyls in a model photocatalytic radical alkylation reaction.Rapid evaluation of substrates and reactions conditions was achieved by high throughput experimentation using 96-well plate photoreactors.展开更多
The azides were reduced to the corresponding amines by two new metal/Lewis acid systems in water or in aqueous EtOH in yields ranging from 80%-95%. The reaction rates were faster in water than in aqueous EtOH in most...The azides were reduced to the corresponding amines by two new metal/Lewis acid systems in water or in aqueous EtOH in yields ranging from 80%-95%. The reaction rates were faster in water than in aqueous EtOH in most cases. All 16 azides with different functional groups were well reduced to the corresponding amines in excellent yields and reaction rates.展开更多
The conversion of acetone derived from biomass to isobutene has attracted extensive attentions.In comparison with Brønsted acidic catalyst,Lewis acidic catalyst could exhibit a better catalytic performance with a...The conversion of acetone derived from biomass to isobutene has attracted extensive attentions.In comparison with Brønsted acidic catalyst,Lewis acidic catalyst could exhibit a better catalytic performance with a higher isobutene selectivity.However,the catalyst stability remains a key problem for the long-running acetone conversion and the reasons for catalyst deactivation are poorly understood up to now.Herein,the deactivation mechanism of Lewis acidic Y/Beta catalyst during the acetone to isobutene conversion was investigated by various characterization techniques,including acetone-temperature-programmed surface reaction,gas chromatography-mass spectrometry,in situ ultraviolet-visible,and ^(13)C cross polarization magic angle spinning nuclear magnetic resonance spectroscopy.A successive aldol condensation and cyclization were observed as the main side-reactions during the acetone conversion at Lewis acidic Y sites.In comparison with the low reaction temperature,a rapid formation and accumulation of the larger cyclic unsaturated aldehydes/ketones and aromatics could be observed,and which could strongly adsorb on the Lewis acidic sites,and thus cause the catalyst deactivation eventually.After a simple calcination,the coke deposits could be easily removed and the catalytic activity could be well restored.展开更多
Photoelectrochemical NO_(3)^(-)reduction(PEC NITRR)not only provides a promising solution for promoting the global nitrogen cycle,but also converts NO_(3)^(-)to the important chemicals(NH_(3)).However,it is still a gr...Photoelectrochemical NO_(3)^(-)reduction(PEC NITRR)not only provides a promising solution for promoting the global nitrogen cycle,but also converts NO_(3)^(-)to the important chemicals(NH_(3)).However,it is still a great challenge to prepare catalysts with excellent NO_(3)^(-)adsorption/activation capacity to achieve high NITRR.Herein,we designed a novel Fe^(2+)~Cu^(2+)Fe^(3+)LDH/BiVO_(4)(FCF-LDH/BVO)catalyst with synergistic effect of chemical adsorption and physical enrichment.Fe^(2+)in FCF-LDH/BVO provides the rich Lewis acid sites for the adsorption of NO_(3)^(-),and the appropriate layer spacing of FCF-LDH further promotes the physical enrichment of NO_(3)^(-)in its interior,thus realizing the effective contact between NO_(3)^(-)and active sites(Fe^(2+)).FCF-LDH/BVO showed excellent NH_(3)production performance(FE_(NH_(3))=66.1%,r_(NH_(3))=13.8μg h^(-1)cm^(-2))and selectivity(FE_(NO_(2)^(-))=2.5%,r_(NO_(2)^(-))=4.9μg h^(-1)cm^(-2))in 0.5 mol L^(-1)Na_(2)SO_(4)electrolyte.In addition,FCF-LDH/BVO maintains the desirable PEC stability for six cycle experiments,showing great potential for practical application.The^(14)NO_(3)^(-)and^(15)NO_(3)^(-)isotope test provides strong evidence for further verification of the origin of N in the generated NH_(3).This LDH catalyst has a great potential in PEC removal of NO_(3)^(-)from groundwater.展开更多
Recently,SnPS_(3) has gained attention as an impressive sodium-ion battery anode material because of its significant theoretical specific capacity derived from the conversion-alloying reaction mechanism.Nevertheless,i...Recently,SnPS_(3) has gained attention as an impressive sodium-ion battery anode material because of its significant theoretical specific capacity derived from the conversion-alloying reaction mechanism.Nevertheless,its practical applicability is restricted by insufficient rate ability,and severe capacity loss due to inadequate electrical conductivity and dramatic volume expansion.Inspired by the electrochemical enhancement effect of MXene substrates and the innovative Lewis acidic etching for MXene preparation,SnPS_(3)/Ti_(3)C_(2)T_(x) MXene(T=-Cl and-O) is constructed by synchronously phospho-sulfurizing Sn/Ti_(3)C_(2)T_(x) precursor.Benefiting from the boosted Na^(+) diffusion and electron transfer rates,as well as the mitigated stress expansion,the synthesized SnPS_(3/)Ti_(3)C_(2)T_(x) composite demonstrates enhanced rate capability(647 mA h g^(-1) at 10 A g^(-1)) alongside satisfactory long-term cycling stability(capacity retention of 94.6% after 2000 cycles at 5 A g^(-1)).Importantly,the assembled sodium-ion full cell delivers an impressive capacity retention of 97.7% after undergoing 1500 cycles at 2 A g^(-1).Moreover,the sodium storage mechanism of the SnPS_(3/)Ti_(3)C_(2)T_(x) electrode is elucidated through in-situ and ex-situ characterizations.This work proposes a novel approach to ameliorate the energy storage performance of thiophosphites by facile in-situ construction of composites with MXene.展开更多
Carbon materials have shown remarkable usefulness in facilitating the performance of insulating sulfur cathode for lithium–sulfur batteries owing to their excellent conductivity and porous structure. However,the anxi...Carbon materials have shown remarkable usefulness in facilitating the performance of insulating sulfur cathode for lithium–sulfur batteries owing to their excellent conductivity and porous structure. However,the anxiety is the poor affinity toward polar polysulfides due to the intrinsic nonpolar surface of carbon.Herein, we report a direct pyrolysis of the mixture urea and boric acid to synthesize B/N–codoped hierarchically porous carbon nanosheets(B–N–CSs) as efficient sulfur host for lithium–sulfur battery. The graphene–like B–N–CSs provides high specific surface area and porous structure with abundant micropores(1.1 nm) and low–range mesopores(2.3 nm), thereby constraining the sulfur active materials within the pores. More importantly, the codoped B/N elements can further enhance the polysulfide confinement through strong Li–N and B–S interaction based on the Lewis acid–base theory. These structural superiorities significantly suppress the shuttle effect by both physical confinement and chemical interaction, and promote the redox kinetics of polysulfide conversion. When evaluated as the cathode host, the S/B–N–CSs composite displays the excellent performance with a high reversible capacity up to 772 m A h g–1 at 0.5 C and a low fading rate of ^0.09% per cycle averaged upon 500 cycles. In particular, remarkable stability with a high capacity retention of 87.1% can be realized when augmenting the sulfur loading in the cathode up to 4.6 mg cm^(-2).展开更多
An experimental investigation was conducted to understand the roles of the Br？nsted acid H2SO4 and Lewis acid Al2（SO4）3 in methyl levulinate（ML） production from biomass carbohydrates, including glucose,fructose a...An experimental investigation was conducted to understand the roles of the Br？nsted acid H2SO4 and Lewis acid Al2（SO4）3 in methyl levulinate（ML） production from biomass carbohydrates, including glucose,fructose and cellulose. The product distributions with different catalysts revealed that the Lewis acid was responsible for the isomerization of methyl glucoside（MG）, producing a significant amount of the subsequent product 5-methoxymethylfurfural（MMF）, while the Br？nsted acid facilitated the production of ML from MMF. Al2（SO4）3 was efficient for monosaccharide conversion but not for cellulose. Using ball-milled cellulose with Al2（SO4）3 resulted in a desired ML yield within a reasonable reaction time. The significant catalysis performances of two types of acids will guide the design of efficient catalytic processes for the selective conversion of biomass into levulinate esters.展开更多
Novel Lewis acidic ionic liquids containing thionyl cations and chloroaluminate anions were obtained by one-pot synthesis for the first time. Their acidities were determined by acetonitrile probe on IR spectrography. ...Novel Lewis acidic ionic liquids containing thionyl cations and chloroaluminate anions were obtained by one-pot synthesis for the first time. Their acidities were determined by acetonitrile probe on IR spectrography. The ionic liquids were used as catalyst for Friedel-Crafts alkylation of benzene and 1-dodecene. The turnovers of l-dodecene were higher than 99%. Monoalkylbenzene selectivity was 98%, while the 2-substituent product selectivity was 45%.展开更多
The self-aldol condensation of aldehydes was investigated with rare-earth cations stabilized by[Si]Beta zeolites in parallel with bulk rare-earth metal oxides.Good catalytic performance was achieved with all Lewis aci...The self-aldol condensation of aldehydes was investigated with rare-earth cations stabilized by[Si]Beta zeolites in parallel with bulk rare-earth metal oxides.Good catalytic performance was achieved with all Lewis acidic rare-earth cations stabilized by zeolites and yttrium appeared to be the best metal choice.According to the results of several complementary techniques,i.e.,temperature-programmed surface reactions,in situ diffuse reflectance infrared Fourier transform spectroscopy,ultraviolet-visible diffuse reflectance spectroscopy,the reaction pathway and mechanism of the aldehyde self-aldol condensation over Y/Beta catalyst were studied in more detail.Density functional theory calculations revealed that aldol dehydration was the rate-limiting step.The hydroxyl group at the open yttrium site played an important role in stabilizing the transition state of the aldol dimer reducing the energy barrier for its hydration.Lewis acidic Y(OSi)(OH)2 stabilized by zeolites in open configurations were identified as the preferred active sites for the self-aldol condensation of aldehydes.展开更多
CeO_(2)-based catalysts are emerging as novel candidates for catalyzing nitrogen reduction reaction(NRR).However, despite the increasing amount of experimental and theoretical research, the design of more efficient ce...CeO_(2)-based catalysts are emerging as novel candidates for catalyzing nitrogen reduction reaction(NRR).However, despite the increasing amount of experimental and theoretical research, the design of more efficient ceria catalysts for NRR remains a challenge due to the poor knowledge of the catalytic mechanism, particularly the nature of the active sites and how they catalyze NRR. Here, using first-principle calculations, we investigated the NRR catalysis process involving adjacent Ce Lewis acid clusters formed on(111),(110), and(100) facets of CeO_(2) as active sites. Our results revealed that the assembled structures of the Ce Lewis acid as active centers after the oxygen vacancies(Ovs) were opened. The exposed Ce sites on CeO_(2)(111), CeO_(2)(110), and CeO_(2)(100) can cause N_(2) to be adsorbed in a ‘‘lying-down" manner, which facilitates the N2 activation and thus leads to much higher NRR activity. Furthermore, from the perspective of electronic structure, we establish two useful descriptors for assessing the NRR activity on ceria with Ovs:The N–N bond strength of the adsorbed N_(2) and the adsorption energy of the *N_(2)H intermediate. This work thus provides direct guidance for the design of more-effective oxide catalysts without the use of scarce metals.展开更多
Treatment of steroidal sapogenin diosgenin 1 with Lewis acid ethereal trifluoroborane in acetic anhydride at room temperature afforded a new type of pseudosapugenin 23, 26-diacetyl-△22(23)- pseudo-sapogenin 3 and its...Treatment of steroidal sapogenin diosgenin 1 with Lewis acid ethereal trifluoroborane in acetic anhydride at room temperature afforded a new type of pseudosapugenin 23, 26-diacetyl-△22(23)- pseudo-sapogenin 3 and its C-20 isomer 4 in 54% and 19% yield respectively.The possible mechanism was also suggested.展开更多
Metal nanoparticle catalysts, especially gold and its bimetallic nanoparticle catalysts, have been widely used in organic transformations as powerful and green catalysts. The concept of employing two distinct catalyst...Metal nanoparticle catalysts, especially gold and its bimetallic nanoparticle catalysts, have been widely used in organic transformations as powerful and green catalysts. The concept of employing two distinct catalysts in one reaction system, such as in cooperative and synergistic catalysis, is a powerful strategy in homogeneous catalysis. However, the adaption of such a strategy to metal nanoparticle catalysis is still under development. Recently, we have found that cooperative catalytic systems of gold/palladium bimetallic nanoparticles and Lewis acid can be used for the N‐alkylation of primary amides through hydrogen autotransfer reaction between amide and alcohol. Herein, the results of a detailed investigation into the effects of Lewis acids on this hydrogen autotransfer reac‐tion are reported. It was found that the choice of Lewis acid affected not only the reaction pathway leading to the desired product, but also other reaction pathways that produced several intermedi‐ates and by‐products. Weak Lewis acids, such as alkaline‐earth metal triflates, were found to be optimal for the desired N‐alkylation of amides.展开更多
For efficient removal of thiophenic sulfur （S-） compounds from oils, a novel method is proposed here, i.e. one-pot alkylation desulfurization （OADS）, in which oil insoluble chlorinated polymer such as polyvinyl ch...For efficient removal of thiophenic sulfur （S-） compounds from oils, a novel method is proposed here, i.e. one-pot alkylation desulfurization （OADS）, in which oil insoluble chlorinated polymer such as polyvinyl chlo- ride （PVC） is used as the alkylating regent with Lewis acid as catalyst. The aromatic S-compounds are grafted to the polymer through Friedel-Crafts reaction and removed facilely along with the polymer. The OADS mechanism is identified by scanning electron microscope and analyzer with surface area and pore size of the polymer. The influ- ence of some factors on the OADS is studied, e.g. the type and amount of chlorinated polymers and Lewis acids. It is nroved that thionhene and benzothioDhene can be removed efficiently from oil by PVC＋AlCl3 mixture even in the presence of 25% （by mass） of benzene due to the synergetic effects of the adsorptive desulfurization of AlCl3 and the alkylation desulfurization of PVC.展开更多
Chloro(5,10,15,20-tetraphenyl-porphyrinato)-aluminum/tetraethylammonium bromide(Et4NBr)in combination with bulky Lewis acid was used for the copolymerization of CO_2 and cyclohexene oxide(CHO).Bulky Lewis acid having ...Chloro(5,10,15,20-tetraphenyl-porphyrinato)-aluminum/tetraethylammonium bromide(Et4NBr)in combination with bulky Lewis acid was used for the copolymerization of CO_2 and cyclohexene oxide(CHO).Bulky Lewis acid having substituents at the ortho positions of the phenolate ligands,like methylaluminum bis(2,6-di-tert-butyl-4-methylphenolate), significantly shortened the induction period and raised the catalytic activity,the corresponding turnover frequency reached 44.9 h^(-1)in 9 h,which was 23.8% higher than th...展开更多
Ratio of Lewis/Brfnsted acid sites (Cl/Cb) on the surface of nano-sized HZSM-5 was successfully manipulated by means of steaming and acid leaching. Significant enhancement of the deactivation durability of nano-sized...Ratio of Lewis/Brfnsted acid sites (Cl/Cb) on the surface of nano-sized HZSM-5 was successfully manipulated by means of steaming and acid leaching. Significant enhancement of the deactivation durability of nano-sized HZSM-5 in the aromatization of fluid catalytic cracking (FCC) gasoline olefins seems to be closely related to the increase of Lewis/Brfnsted acid sites ratio.展开更多
基金the National Science Foundation for Excellent Young Scholars of China(21922815)the Key Research and Development(R&D)Projects of Shanxi Province(201903D121007)+3 种基金the Natural Science Foundations of Shanxi Province(201801D221156)the DNL Cooperation Fund of CAS(DNL180308)the Science and Technology Service Network Initiative of CAS(KFJ-STS-ZDTP-068)the Youth Innovation Promotion Association of CAS。
文摘The incorporation of boron into carbon material can significantly enhance its capacity performances.However,the origin of the promotion effect of boron doping on electrochemical performances is still unclear,in part due to the inadequate exposure of boron configurations resulting from the complexity of traditional carbon materials.To overcome this issue,herein,a series of boron-doped graphene with highly-exposed boron configurations are prepared by tuning annealing temperature.Then the correlation between boron configurations and the electrochemical performances is investigated.The combination of density-functional theory(DFT)computation and NH3-TPD/Py-FTIR indicates that the BCO_(2)configuration formed on the surface of graphene is easier to accept lone-pair electrons than BC_(2)O and BC_(3)configurations due to the stronger Lewis acidity.Such an electronic structure can effectively reduce the number of unstable electron donors and stabilize the electrochemical interface,which is proved by NMR,and critical for improving the electrochemical performances.Further experiments confirm that the optimized BG800 with the largest amount of BCO_(2)configuration presents ultralow leak current,improved cyclic stability,and better rate performance in SBPBF4/PC.This work would provide an insight into the design of high-performance boron-doped carbon materials towards energy storage.
文摘Various methods have been developed to measure the strength of a Lewis acid.A major challenge for these measurements lies in the complexity that arises from variable solvent interactions and perturbations of Lewis acids as their reaction environment changes.Herein,we investigate the impact of solvent effects on Lewis acids for the first time as measured by the fluorescent Lewis adduct(FLA)method.The binding of a Lewis acid in various solvents reveals a measurable dichotomy between both polarity and donor ability of the solvent.While not strictly separable,we observe that the influence of solvent polarity on Lewis acid unit(LAU)values is distinctly opposite to the influence of donor ability.This dichotomy was confirmed by titration data,illustrating that solvation effects can be appropriately and precisely gauged by the FLA method.
基金This study was financially supported by National Renewable Energy Laboratory Subcontract No.AEV-0-40634-01North Dakota Experimental Program to Stimulate Competitive Research(EPSCoR).
文摘The dilute sulfuric acid pretreatment of lignocellulosic biomass is a well understood process that significantly enhances the yield of glucose after enzymatic saccharification.The goal of this research was to perform a systematic study to evaluate the yield of fermentable sugars during dilute sulfuric acid pretreatment that is co-catalyzed with the transition metal Lewis acid salts:AlCl_(3),FeCl_(2),FeCl_(3),and La(OTf)_(3).All Lewis acids apart from FeCl_(2)reduced the presence of xylo-oligomers by a large margin when compared to the non-co-catalyzed control sample pretreatments.The presence of these xylo-oligomers acts as inhibitors during enzymatic saccaharification step.The Lewis acids AlCl_(3),FeCl_(3),and La(OTf)_(3)were also able to marginally increase the overall enzymatic digestibility specifically for corn stover pretreated at 160℃with 10 mM of Lewis acids.The hard Lewis acid such as AlCl3 increased the formation inhibitory products such as furfural and 5-hydroxymethylfurfural(HMF).There was good correlation between reduction of xylo-oligomers and increased concentration furfural with increase in Lewis acid hardness.
基金supported by the Highstar Corporation HSD20210118Taihu Electric Corporation 0001。
文摘Since the discovery in 2011,MXenes have become the rising star in the field of two-dimensional materials.Benefiting from the metallic-level conductivity,large and adjustable gallery spacing,low ion diffusion barrier,rich surface chemistry,superior mechanical strength,MXenes exhibit great application prospects in energy storage and conversion,sensors,optoelectronics,electromagnetic interference shielding and biomedicine.Nevertheless,two issues seriously deteriorate the further development of MXenes.One is the high experimental risk of common preparation methods such as HF etching,and the other is the difficulty in obtaining MXenes with controllable surface groups.Recently,Lewis acidic etching,as a brand-new preparation strategy for MXenes,has attracted intensive attention due to its high safety and the ability to endow MXenes with uniform terminations.However,a comprehensive review of Lewis acidic etching method has not been reported yet.Herein,we first introduce the Lewis acidic etching from the following four aspects:etching mechanism,terminations regulation,in-situ formed metals and delamination of multi-layered MXenes.Further,the applications of MXenes and MXene-based hybrids obtained by Lewis acidic etching route in energy storage and conversion,sensors and microwave absorption are carefully summarized.Finally,some challenges and opportunities of Lewis acidic etching strategy are also presented.
基金the National Institutes of Health(No.GM 46503)the National Science Foundation(No.CHE-1212446)the starting funding from Soochow University and Key Laboratory of Organic Synthesis of Jiangsu Province
文摘β,γ-Unsaturated a-diazocarbonyl compounds possess two reactive sites for electrophilic addition-one at the diazo carbon and the other at the vinylogous γ-position.Controlled by catalyst,divergent transformations are achieved starting from the same starting materials,either by Lewis acid-catalyzed addition or by dirhodium-catalyzed metal carbene reactions.In select cases two catalysts working in combination or in sequence provide a relay for cascade transformations.In this review,we summarize advances in catalyst-dependent divergent transformations of β,γ-unsaturated α-diazocarbonyl compounds and highlight the potential of this exciting research area and the many challenges that remain.
基金We thank Northwestern University and the National Institute of General Medical Sciences(Nos.R01 GM131431 and R35 GM136440)for support of this work.
文摘Recent advances in photocatalysis have enabled radical methods with complementary chemoselectivity to established two electron bond forming approaches.While this radical strategy has previously been limited to substrates with favorable redox potentials,Brønsted/Lewis acid activation has emerged as a means of facilitating otherwise difficult reductions.We report herein our investigations into the Lewis acid-promoted redox activation ofβ-ketocarbonyls in a model photocatalytic radical alkylation reaction.Rapid evaluation of substrates and reactions conditions was achieved by high throughput experimentation using 96-well plate photoreactors.
文摘The azides were reduced to the corresponding amines by two new metal/Lewis acid systems in water or in aqueous EtOH in yields ranging from 80%-95%. The reaction rates were faster in water than in aqueous EtOH in most cases. All 16 azides with different functional groups were well reduced to the corresponding amines in excellent yields and reaction rates.
文摘The conversion of acetone derived from biomass to isobutene has attracted extensive attentions.In comparison with Brønsted acidic catalyst,Lewis acidic catalyst could exhibit a better catalytic performance with a higher isobutene selectivity.However,the catalyst stability remains a key problem for the long-running acetone conversion and the reasons for catalyst deactivation are poorly understood up to now.Herein,the deactivation mechanism of Lewis acidic Y/Beta catalyst during the acetone to isobutene conversion was investigated by various characterization techniques,including acetone-temperature-programmed surface reaction,gas chromatography-mass spectrometry,in situ ultraviolet-visible,and ^(13)C cross polarization magic angle spinning nuclear magnetic resonance spectroscopy.A successive aldol condensation and cyclization were observed as the main side-reactions during the acetone conversion at Lewis acidic Y sites.In comparison with the low reaction temperature,a rapid formation and accumulation of the larger cyclic unsaturated aldehydes/ketones and aromatics could be observed,and which could strongly adsorb on the Lewis acidic sites,and thus cause the catalyst deactivation eventually.After a simple calcination,the coke deposits could be easily removed and the catalytic activity could be well restored.
基金National Natural Science Foundation of China(22075112)Jiangsu Province and Education Ministry Co-Sponsored Synergistic Innovation Center of Modern Agricultural Equipment(XTCX2027)Jiangsu Province Innovation Support Program International Science and Technology Cooperation Project(BZ2022045)。
文摘Photoelectrochemical NO_(3)^(-)reduction(PEC NITRR)not only provides a promising solution for promoting the global nitrogen cycle,but also converts NO_(3)^(-)to the important chemicals(NH_(3)).However,it is still a great challenge to prepare catalysts with excellent NO_(3)^(-)adsorption/activation capacity to achieve high NITRR.Herein,we designed a novel Fe^(2+)~Cu^(2+)Fe^(3+)LDH/BiVO_(4)(FCF-LDH/BVO)catalyst with synergistic effect of chemical adsorption and physical enrichment.Fe^(2+)in FCF-LDH/BVO provides the rich Lewis acid sites for the adsorption of NO_(3)^(-),and the appropriate layer spacing of FCF-LDH further promotes the physical enrichment of NO_(3)^(-)in its interior,thus realizing the effective contact between NO_(3)^(-)and active sites(Fe^(2+)).FCF-LDH/BVO showed excellent NH_(3)production performance(FE_(NH_(3))=66.1%,r_(NH_(3))=13.8μg h^(-1)cm^(-2))and selectivity(FE_(NO_(2)^(-))=2.5%,r_(NO_(2)^(-))=4.9μg h^(-1)cm^(-2))in 0.5 mol L^(-1)Na_(2)SO_(4)electrolyte.In addition,FCF-LDH/BVO maintains the desirable PEC stability for six cycle experiments,showing great potential for practical application.The^(14)NO_(3)^(-)and^(15)NO_(3)^(-)isotope test provides strong evidence for further verification of the origin of N in the generated NH_(3).This LDH catalyst has a great potential in PEC removal of NO_(3)^(-)from groundwater.
基金financially National Natural Science Foundation of China (Grant Number: 22265018)Key Project of Natural Science Foundation of Jiangxi Province (Grant Number: 20232ACB204010)。
文摘Recently,SnPS_(3) has gained attention as an impressive sodium-ion battery anode material because of its significant theoretical specific capacity derived from the conversion-alloying reaction mechanism.Nevertheless,its practical applicability is restricted by insufficient rate ability,and severe capacity loss due to inadequate electrical conductivity and dramatic volume expansion.Inspired by the electrochemical enhancement effect of MXene substrates and the innovative Lewis acidic etching for MXene preparation,SnPS_(3)/Ti_(3)C_(2)T_(x) MXene(T=-Cl and-O) is constructed by synchronously phospho-sulfurizing Sn/Ti_(3)C_(2)T_(x) precursor.Benefiting from the boosted Na^(+) diffusion and electron transfer rates,as well as the mitigated stress expansion,the synthesized SnPS_(3/)Ti_(3)C_(2)T_(x) composite demonstrates enhanced rate capability(647 mA h g^(-1) at 10 A g^(-1)) alongside satisfactory long-term cycling stability(capacity retention of 94.6% after 2000 cycles at 5 A g^(-1)).Importantly,the assembled sodium-ion full cell delivers an impressive capacity retention of 97.7% after undergoing 1500 cycles at 2 A g^(-1).Moreover,the sodium storage mechanism of the SnPS_(3/)Ti_(3)C_(2)T_(x) electrode is elucidated through in-situ and ex-situ characterizations.This work proposes a novel approach to ameliorate the energy storage performance of thiophosphites by facile in-situ construction of composites with MXene.
基金financial support of the National Natural Science Foundation of China (Grant No. 21263016, 21363015, 51662029, 21863006)the Youth Science Foundation of Jiangxi Province (Grant No. 20192BAB216001)the Key Laboratory of Jiangxi Province for Environment and Energy Catalysis (20181BCD40004)。
文摘Carbon materials have shown remarkable usefulness in facilitating the performance of insulating sulfur cathode for lithium–sulfur batteries owing to their excellent conductivity and porous structure. However,the anxiety is the poor affinity toward polar polysulfides due to the intrinsic nonpolar surface of carbon.Herein, we report a direct pyrolysis of the mixture urea and boric acid to synthesize B/N–codoped hierarchically porous carbon nanosheets(B–N–CSs) as efficient sulfur host for lithium–sulfur battery. The graphene–like B–N–CSs provides high specific surface area and porous structure with abundant micropores(1.1 nm) and low–range mesopores(2.3 nm), thereby constraining the sulfur active materials within the pores. More importantly, the codoped B/N elements can further enhance the polysulfide confinement through strong Li–N and B–S interaction based on the Lewis acid–base theory. These structural superiorities significantly suppress the shuttle effect by both physical confinement and chemical interaction, and promote the redox kinetics of polysulfide conversion. When evaluated as the cathode host, the S/B–N–CSs composite displays the excellent performance with a high reversible capacity up to 772 m A h g–1 at 0.5 C and a low fading rate of ^0.09% per cycle averaged upon 500 cycles. In particular, remarkable stability with a high capacity retention of 87.1% can be realized when augmenting the sulfur loading in the cathode up to 4.6 mg cm^(-2).
基金supported by the National Key R&D Program of China (No. 2016YFE0112800)the European Union’s Horizon 2020 research and innovation programme (No. 690142)+1 种基金the project Agro Cycle (Sustainable techno-economic solutions for the agricultural value chain)the National Natural Science Foundation of China (No. 31671572)
文摘An experimental investigation was conducted to understand the roles of the Br？nsted acid H2SO4 and Lewis acid Al2（SO4）3 in methyl levulinate（ML） production from biomass carbohydrates, including glucose,fructose and cellulose. The product distributions with different catalysts revealed that the Lewis acid was responsible for the isomerization of methyl glucoside（MG）, producing a significant amount of the subsequent product 5-methoxymethylfurfural（MMF）, while the Br？nsted acid facilitated the production of ML from MMF. Al2（SO4）3 was efficient for monosaccharide conversion but not for cellulose. Using ball-milled cellulose with Al2（SO4）3 resulted in a desired ML yield within a reasonable reaction time. The significant catalysis performances of two types of acids will guide the design of efficient catalytic processes for the selective conversion of biomass into levulinate esters.
基金the grant from the National Natural Science Foundation of China （Key Program 20533010）.
文摘Novel Lewis acidic ionic liquids containing thionyl cations and chloroaluminate anions were obtained by one-pot synthesis for the first time. Their acidities were determined by acetonitrile probe on IR spectrography. The ionic liquids were used as catalyst for Friedel-Crafts alkylation of benzene and 1-dodecene. The turnovers of l-dodecene were higher than 99%. Monoalkylbenzene selectivity was 98%, while the 2-substituent product selectivity was 45%.
文摘The self-aldol condensation of aldehydes was investigated with rare-earth cations stabilized by[Si]Beta zeolites in parallel with bulk rare-earth metal oxides.Good catalytic performance was achieved with all Lewis acidic rare-earth cations stabilized by zeolites and yttrium appeared to be the best metal choice.According to the results of several complementary techniques,i.e.,temperature-programmed surface reactions,in situ diffuse reflectance infrared Fourier transform spectroscopy,ultraviolet-visible diffuse reflectance spectroscopy,the reaction pathway and mechanism of the aldehyde self-aldol condensation over Y/Beta catalyst were studied in more detail.Density functional theory calculations revealed that aldol dehydration was the rate-limiting step.The hydroxyl group at the open yttrium site played an important role in stabilizing the transition state of the aldol dimer reducing the energy barrier for its hydration.Lewis acidic Y(OSi)(OH)2 stabilized by zeolites in open configurations were identified as the preferred active sites for the self-aldol condensation of aldehydes.
基金supported by the National Natural Science Foundation of China (21973013 and 21673040 to S.L, and 21962007 to S.Z)the Natural Science Foundation of Fujian Province of China (2020J02025 to S.L)+2 种基金the Natural Science Foundation of Jiangxi Province (2020BABL203009 to S.Z)the Foundation of Jiangxi Educational Committee (GJJ190697 to S.Z)the Qishan Scholarship Program of Fuzhou University (XRC-17055 to S.L)。
文摘CeO_(2)-based catalysts are emerging as novel candidates for catalyzing nitrogen reduction reaction(NRR).However, despite the increasing amount of experimental and theoretical research, the design of more efficient ceria catalysts for NRR remains a challenge due to the poor knowledge of the catalytic mechanism, particularly the nature of the active sites and how they catalyze NRR. Here, using first-principle calculations, we investigated the NRR catalysis process involving adjacent Ce Lewis acid clusters formed on(111),(110), and(100) facets of CeO_(2) as active sites. Our results revealed that the assembled structures of the Ce Lewis acid as active centers after the oxygen vacancies(Ovs) were opened. The exposed Ce sites on CeO_(2)(111), CeO_(2)(110), and CeO_(2)(100) can cause N_(2) to be adsorbed in a ‘‘lying-down" manner, which facilitates the N2 activation and thus leads to much higher NRR activity. Furthermore, from the perspective of electronic structure, we establish two useful descriptors for assessing the NRR activity on ceria with Ovs:The N–N bond strength of the adsorbed N_(2) and the adsorption energy of the *N_(2)H intermediate. This work thus provides direct guidance for the design of more-effective oxide catalysts without the use of scarce metals.
文摘Treatment of steroidal sapogenin diosgenin 1 with Lewis acid ethereal trifluoroborane in acetic anhydride at room temperature afforded a new type of pseudosapugenin 23, 26-diacetyl-△22(23)- pseudo-sapogenin 3 and its C-20 isomer 4 in 54% and 19% yield respectively.The possible mechanism was also suggested.
基金partially supported by a Grant-in-Aid for Science Research from the Japan Society for the Promotion of Science(JSPS)the Global COE Program,the University of Tokyo,the Japan Science and Technology Agency(JST)the Ministry of Education,Culture,Sports,Science and Tech-nology(MEXT,Japan)
文摘Metal nanoparticle catalysts, especially gold and its bimetallic nanoparticle catalysts, have been widely used in organic transformations as powerful and green catalysts. The concept of employing two distinct catalysts in one reaction system, such as in cooperative and synergistic catalysis, is a powerful strategy in homogeneous catalysis. However, the adaption of such a strategy to metal nanoparticle catalysis is still under development. Recently, we have found that cooperative catalytic systems of gold/palladium bimetallic nanoparticles and Lewis acid can be used for the N‐alkylation of primary amides through hydrogen autotransfer reaction between amide and alcohol. Herein, the results of a detailed investigation into the effects of Lewis acids on this hydrogen autotransfer reac‐tion are reported. It was found that the choice of Lewis acid affected not only the reaction pathway leading to the desired product, but also other reaction pathways that produced several intermedi‐ates and by‐products. Weak Lewis acids, such as alkaline‐earth metal triflates, were found to be optimal for the desired N‐alkylation of amides.
基金Supported by the National Natural Science Foundation of China(21376011)the Fundamental Research Foundation of Sinopec(X505015)
文摘For efficient removal of thiophenic sulfur （S-） compounds from oils, a novel method is proposed here, i.e. one-pot alkylation desulfurization （OADS）, in which oil insoluble chlorinated polymer such as polyvinyl chlo- ride （PVC） is used as the alkylating regent with Lewis acid as catalyst. The aromatic S-compounds are grafted to the polymer through Friedel-Crafts reaction and removed facilely along with the polymer. The OADS mechanism is identified by scanning electron microscope and analyzer with surface area and pore size of the polymer. The influ- ence of some factors on the OADS is studied, e.g. the type and amount of chlorinated polymers and Lewis acids. It is nroved that thionhene and benzothioDhene can be removed efficiently from oil by PVC＋AlCl3 mixture even in the presence of 25% （by mass） of benzene due to the synergetic effects of the adsorptive desulfurization of AlCl3 and the alkylation desulfurization of PVC.
基金The work was financially supported by the National Natural Science Foundation of China(No.20634040).
文摘Chloro(5,10,15,20-tetraphenyl-porphyrinato)-aluminum/tetraethylammonium bromide(Et4NBr)in combination with bulky Lewis acid was used for the copolymerization of CO_2 and cyclohexene oxide(CHO).Bulky Lewis acid having substituents at the ortho positions of the phenolate ligands,like methylaluminum bis(2,6-di-tert-butyl-4-methylphenolate), significantly shortened the induction period and raised the catalytic activity,the corresponding turnover frequency reached 44.9 h^(-1)in 9 h,which was 23.8% higher than th...
文摘Ratio of Lewis/Brfnsted acid sites (Cl/Cb) on the surface of nano-sized HZSM-5 was successfully manipulated by means of steaming and acid leaching. Significant enhancement of the deactivation durability of nano-sized HZSM-5 in the aromatization of fluid catalytic cracking (FCC) gasoline olefins seems to be closely related to the increase of Lewis/Brfnsted acid sites ratio.
