Objective This study aimed to explore the association of single nucleotide polymorphisms(SNP)in the matrix metalloproteinase 2(MMP-2)signaling pathway and the risk of vascular senescence(VS).Methods In this cross-sect...Objective This study aimed to explore the association of single nucleotide polymorphisms(SNP)in the matrix metalloproteinase 2(MMP-2)signaling pathway and the risk of vascular senescence(VS).Methods In this cross-sectional study,between May and November 2022,peripheral venous blood of151 VS patients(case group)and 233 volunteers(control group)were collected.Fourteen SNPs were identified in five genes encoding the components of the MMP-2 signaling pathway,assessed through carotid-femoral pulse wave velocity(cf PWV),and analyzed using multivariate logistic regression.The multigene influence on the risk of VS was assessed using multifactor dimensionality reduction(MDR)and generalized multifactor dimensionality regression(GMDR)modeling.Results Within the multivariate logistic regression models,four SNPs were screened to have significant associations with VS:chemokine(C-C motif)ligand 2(CCL2)rs4586,MMP2 rs14070,MMP2rs7201,and MMP2 rs1053605.Carriers of the T/C genotype of MMP2 rs14070 had a 2.17-fold increased risk of developing VS compared with those of the C/C genotype,and those of the T/T genotype had a19.375-fold increased risk.CCL2 rs4586 and MMP-2 rs14070 exhibited the most significant interactions.Conclusion CCL2 rs4586,MMP-2 rs14070,MMP-2 rs7201,and MMP-2 rs1053605 polymorphisms were significantly associated with the risk of VS.展开更多
BACKGROUND Abdominal wall deficiencies or weakness are a common complication of tem-porary ostomies,and incisional hernias frequently develop after colostomy or ileostomy takedown.The use of synthetic meshes to reinfo...BACKGROUND Abdominal wall deficiencies or weakness are a common complication of tem-porary ostomies,and incisional hernias frequently develop after colostomy or ileostomy takedown.The use of synthetic meshes to reinforce the abdominal wall has reduced hernia occurrence.Biologic meshes have also been used to enhance healing,particularly in contaminated conditions.Reinforced tissue matrices(R-TMs),which include a biologic scaffold of native extracellular matrix and a syn-thetic component for added strength/durability,are designed to take advantage of aspects of both synthetic and biologic materials.To date,RTMs have not been reported to reinforce the abdominal wall following stoma reversal.METHODS Twenty-eight patients were selected with a parastomal and/or incisional hernia who had received a temporary ileostomy or colostomy for fecal diversion after rectal cancer treatment or trauma.Following hernia repair and proximal stoma closure,RTM(OviTex®1S permanent or OviTex®LPR)was placed to reinforce the abdominal wall using a laparoscopic,robotic,or open surgical approach.Post-operative follow-up was performed at 1 month and 1 year.Hernia recurrence was determined by physical examination and,when necessary,via computed tomo-graphy scan.Secondary endpoints included length of hospital stay,time to return to work,and hospital readmissions.Evaluated complications of the wound/repair site included presence of surgical site infection,seroma,hematoma,wound dehiscence,or fistula formation.RESULTS The observational study cohort included 16 male and 12 female patients with average age of 58.5 years±16.3 years and average body mass index of 26.2 kg/m^(2)±4.1 kg/m^(2).Patients presented with a parastomal hernia(75.0%),in-cisional hernia(14.3%),or combined parastomal/incisional hernia(10.7%).Using a laparoscopic(53.6%),robotic(35.7%),or open(10.7%)technique,RTMs(OviTex®LPR:82.1%,OviTex®1S:17.9%)were placed using sublay(82.1%)or intraperitoneal onlay(IPOM;17.9%)mesh positioning.At 1-month and 1-year follow-ups,there were no hernia recurrences(0%).Average hospital stays were 2.1 d±1.2 d and return to work occurred at 8.3 post-operative days±3.0 post-operative days.Three patients(10.7%)were readmitted before the 1-month follow up due to mesh infection and/or gastrointestinal issues.Fistula and mesh infection were observed in two patients each(7.1%),leading to partial mesh removal in one patient(3.6%).There were no complications between 1 month and 1 year(0%).CONCLUSION RTMs were used successfully to treat parastomal and incisional hernias at ileostomy reversal,with no hernia recurrences and favorable outcomes after 1-month and 1-year.展开更多
BACKGROUND Frey syndrome,also known as ototemporal nerve syndrome or gustatory sweating syndrome,is one of the most common complications of parotid gland surgery.This condition is characterized by abnormal sensations ...BACKGROUND Frey syndrome,also known as ototemporal nerve syndrome or gustatory sweating syndrome,is one of the most common complications of parotid gland surgery.This condition is characterized by abnormal sensations in the facial skin accompanied by episodes of flushing and sweating triggered by cognitive processes,visual stimuli,or eating.AIM To investigate the preventive effect of acellular dermal matrix(ADM)on Frey syndrome after parotid tumor resection and analyzed the effects of Frey syndrome across various surgical methods and other factors involved in parotid tumor resection.METHODS Retrospective data from 82 patients were analyzed to assess the correlation between sex,age,resection sample size,operation time,operation mode,ADM usage,and occurrence of postoperative Frey syndrome.RESULTS Among the 82 patients,the incidence of Frey syndrome was 56.1%.There were no significant differences in sex,age,or operation time between the two groups(P>0.05).However,there was a significant difference between ADM implantation and occurrence of Frey syndrome(P<0.05).ADM application could reduce the variation in the incidence of Frey syndrome across different operation modes.CONCLUSION ADM can effectively prevent Frey syndrome and delay its onset.展开更多
In regard to unconventional oil reservoirs,the transient dual-porosity and triple-porosity models have been adopted to describe the fluid flow in the complex fracture network.It has been proven to cause inaccurate pro...In regard to unconventional oil reservoirs,the transient dual-porosity and triple-porosity models have been adopted to describe the fluid flow in the complex fracture network.It has been proven to cause inaccurate production evaluations because of the absence of matrix-macrofracture communication.In addition,most of the existing models are solved analytically based on Laplace transform and numerical inversion.Hence,an approximate analytical solution is derived directly in real-time space considering variable matrix blocks and simultaneous matrix depletion.To simplify the derivation,the simultaneous matrix depletion is divided into two parts:one part feeding the macrofractures and the other part feeding the microfractures.Then,a series of partial differential equations(PDEs)describing the transient flow and boundary conditions are constructed and solved analytically by integration.Finally,a relationship between oil rate and production time in real-time space is obtained.The new model is verified against classical analytical models.When the microfracture system and matrix-macrofracture communication is neglected,the result of the new model agrees with those obtained with the dual-porosity and triple-porosity model,respectively.Certainly,the new model also has an excellent agreement with the numerical model.The model is then applied to two actual tight oil wells completed in western Canada sedimentary basin.After identifying the flow regime,the solution suitably matches the field production data,and the model parameters are determined.Through these output parameters,we can accurately forecast the production and even estimate the petrophysical properties.展开更多
Autograft or metal implants are routinely used in skeletal repair.However,they fail to provide long-term clinical resolution,necessitating a functional biomimetic tissue engineering alternative.The use of native human...Autograft or metal implants are routinely used in skeletal repair.However,they fail to provide long-term clinical resolution,necessitating a functional biomimetic tissue engineering alternative.The use of native human bone tissue for synthesizing a biomimeticmaterial inkfor three-dimensional(3D)bioprintingof skeletal tissueis anattractivestrategyfor tissueregeneration.Thus,human bone extracellular matrix(bone-ECM)offers an exciting potential for the development of an appropriate microenvironment for human bone marrow stromal cells(HBMSCs)to proliferate and differentiate along the osteogenic lineage.In this study,we engineered a novel material ink(LAB)by blending human bone-ECM(B)with nanoclay(L,Laponite®)and alginate(A)polymers using extrusion-based deposition.The inclusion of the nanofiller and polymeric material increased the rheology,printability,and drug retention properties and,critically,the preservation of HBMSCs viability upon printing.The composite of human bone-ECM-based 3D constructs containing vascular endothelial growth factor(VEGF)enhanced vascularization after implantation in an ex vivo chick chorioallantoic membrane(CAM)model.The inclusion of bone morphogenetic protein-2(BMP-2)with the HBMSCs further enhanced vascularization and mineralization after only seven days.This study demonstrates the synergistic combination of nanoclay with biomimetic materials(alginate and bone-ECM)to support the formation of osteogenic tissue both in vitro and ex vivo and offers a promising novel 3D bioprinting approach to personalized skeletal tissue repair.展开更多
High-precision and real-time diagnosis of sucker rod pumping system(SRPS)is important for quickly mastering oil well operations.Deep learning-based method for classifying the dynamometer card(DC)of oil wells is an eff...High-precision and real-time diagnosis of sucker rod pumping system(SRPS)is important for quickly mastering oil well operations.Deep learning-based method for classifying the dynamometer card(DC)of oil wells is an efficient diagnosis method.However,the input of the DC as a two-dimensional image into the deep learning framework suffers from low feature utilization and high computational effort.Additionally,different SRPSs in an oil field have various system parameters,and the same SRPS generates different DCs at different moments.Thus,there is heterogeneity in field data,which can dramatically impair the diagnostic accuracy.To solve the above problems,a working condition recognition method based on 4-segment time-frequency signature matrix(4S-TFSM)and deep learning is presented in this paper.First,the 4-segment time-frequency signature(4S-TFS)method that can reduce the computing power requirements is proposed for feature extraction of DC data.Subsequently,the 4S-TFSM is constructed by relative normalization and matrix calculation to synthesize the features of multiple data and solve the problem of data heterogeneity.Finally,a convolutional neural network(CNN),one of the deep learning frameworks,is used to determine the functioning conditions based on the 4S-TFSM.Experiments on field data verify that the proposed diagnostic method based on 4S-TFSM and CNN(4S-TFSM-CNN)can significantly improve the accuracy of working condition recognition with lower computational cost.To the best of our knowledge,this is the first work to discuss the effect of data heterogeneity on the working condition recognition performance of SRPS.展开更多
Spatial covariance matrix(SCM) is essential in many multi-antenna systems such as massive multiple-input multiple-output(MIMO). For multi-antenna systems operating at millimeter-wave bands, hybrid analog-digital struc...Spatial covariance matrix(SCM) is essential in many multi-antenna systems such as massive multiple-input multiple-output(MIMO). For multi-antenna systems operating at millimeter-wave bands, hybrid analog-digital structure has been widely adopted to reduce the cost of radio frequency chains.In this situation, signals received at the antennas are unavailable to the digital receiver, and as a consequence, traditional sample average approach cannot be used for SCM reconstruction in hybrid multi-antenna systems. To address this issue, beam sweeping algorithm(BSA) which can reconstruct the SCM effectively for a hybrid uniform linear array, has been proposed in our previous works. However, direct extension of BSA to a hybrid uniform circular array(UCA)will result in a huge computational burden. To this end, a low-complexity approach is proposed in this paper. By exploiting the symmetry features of SCM for the UCA, the number of unknowns can be reduced significantly and thus the complexity of reconstruction can be saved accordingly. Furthermore, an insightful analysis is also presented in this paper, showing that the reduction of the number of unknowns can also improve the accuracy of the reconstructed SCM. Simulation results are also shown to demonstrate the proposed approach.展开更多
The performance of solid solution aging treatment on aluminum matrix composites prepared by powder metallurgy and reinforced with 6061 aluminum alloy powder as matrix;meanwhile, nano silicon carbide particles(nm Si Cp...The performance of solid solution aging treatment on aluminum matrix composites prepared by powder metallurgy and reinforced with 6061 aluminum alloy powder as matrix;meanwhile, nano silicon carbide particles(nm Si Cp), submicron silicon carbide particles(1 μm Si Cp) and Ti particles were studied. The Al/Si Cp composite powder was prepared by high-energy ball milling, and then cold-pressed, sintered, hotextruded, and then heat-treated with different solution temperatures and aging times for the extruded composites. Optical microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy(EDS), X-ray diffractometer(XRD) and extrusion testing were used to analyze and test the microstructure and mechanical properties of aluminum matrix composites. The results show that after the multi-stage solid solution at 530 ℃×2 h+535 ℃×2 h+540 ℃×2 h, the particles are mainly equiaxed grains and uniformly distributed. There is no reinforcement agglomeration, and the surface is dense and the insoluble phase is basically dissolved. In the matrix, the strengthening effect is good, and the hardness and compressive strength are 179.43 HV and 680.42 MPa, respectively. Under this solution process, when the aluminum matrix composites are aged at 170 ℃ for 10 h, the hardness and compressive strength can reach their peaks and increase to 195.82 HV and 721.48 MPa, respectively.展开更多
Automatic modulation recognition(AMR)of radiation source signals is a research focus in the field of cognitive radio.However,the AMR of radiation source signals at low SNRs still faces a great challenge.Therefore,the ...Automatic modulation recognition(AMR)of radiation source signals is a research focus in the field of cognitive radio.However,the AMR of radiation source signals at low SNRs still faces a great challenge.Therefore,the AMR method of radiation source signals based on two-dimensional data matrix and improved residual neural network is proposed in this paper.First,the time series of the radiation source signals are reconstructed into two-dimensional data matrix,which greatly simplifies the signal preprocessing process.Second,the depthwise convolution and large-size convolutional kernels based residual neural network(DLRNet)is proposed to improve the feature extraction capability of the AMR model.Finally,the model performs feature extraction and classification on the two-dimensional data matrix to obtain the recognition vector that represents the signal modulation type.Theoretical analysis and simulation results show that the AMR method based on two-dimensional data matrix and improved residual network can significantly improve the accuracy of the AMR method.The recognition accuracy of the proposed method maintains a high level greater than 90% even at -14 dB SNR.展开更多
This study aimed to investigate the pollution characteristics, source apportionment, and health risks associated with trace metal(loid)s(TMs) in the major agricultural producing areas in Chongqing, China. We analyzed ...This study aimed to investigate the pollution characteristics, source apportionment, and health risks associated with trace metal(loid)s(TMs) in the major agricultural producing areas in Chongqing, China. We analyzed the source apportionment and assessed the health risk of TMs in agricultural soils by using positive matrix factorization(PMF) model and health risk assessment(HRA) model based on Monte Carlo simulation. Meanwhile, we combined PMF and HRA models to explore the health risks of TMs in agricultural soils by different pollution sources to determine the priority control factors. Results showed that the average contents of cadmium(Cd), arsenic (As), lead(Pb), chromium(Cr), copper(Cu), nickel(Ni), and zinc(Zn) in the soil were found to be 0.26, 5.93, 27.14, 61.32, 23.81, 32.45, and 78.65 mg/kg, respectively. Spatial analysis and source apportionment analysis revealed that urban and industrial sources, agricultural sources, and natural sources accounted for 33.0%, 27.7%, and 39.3% of TM accumulation in the soil, respectively. In the HRA model based on Monte Carlo simulation, noncarcinogenic risks were deemed negligible(hazard index <1), the carcinogenic risks were at acceptable level(10^(-6)<total carcinogenic risk ≤ 10^(-4)), with higher risks observed for children compared to adults. The relationship between TMs, their sources, and health risks indicated that urban and industrial sources were primarily associated with As, contributing to 75.1% of carcinogenic risks and 55.7% of non-carcinogenic risks, making them the primary control factors. Meanwhile, agricultural sources were primarily linked to Cd and Pb, contributing to 13.1% of carcinogenic risks and 21.8% of non-carcinogenic risks, designating them as secondary control factors.展开更多
Background:As a form of biological therapy,placenta-derived mesenchymal stem cells(PDMSCs)exhibit considerable promise in addressing the complex pathological processes of traumaticbrain injury(TBI)due to their multi-t...Background:As a form of biological therapy,placenta-derived mesenchymal stem cells(PDMSCs)exhibit considerable promise in addressing the complex pathological processes of traumaticbrain injury(TBI)due to their multi-target and multi-pathway mode of action.Material&Methods:This study investigates the protective mechanisms and benefits of PDMSCs in mitigating the effects of controlled cortical impact(CCI)in rats and glutamate-induced oxidative stress injury in HT22 cells in vitro.Our primary objective is to provide evidence supporting the clinical application of PDMSCs.Results:In the in vivo arm of our investigation,we observed a swift elevation of matrix metalloproteinase-9(MMP-9)in the proximal cortex of injured brain tissues after CCI.PDMSCs,distinguished by their heightened expression of metalloproteinase tissue inhibitors-1 and-2(TIMP-1 and TIMP-2):were intravenously administered via the caudal vein.This intervention yielded significant reductions in the permeability of the blood-brain barrier(BBB):the extent of brain edema,the levels of inflammatory cytokines IL-1βand TNF-αin damaged brain tissue,and the activation status of microglia in CCI-afflicted rats.In the realm of in vitro experiments,PDMSC-conditioned media demonstrated substantial reductions in mortality rates and cleaved caspase-3 levels in glutamate-induced HT22 cells compared with conventional media.Notably,this advantage was negated upon the introduction of neutralizing antibodies targeting TIMP-1 and TIMP-2.Conclusion:Collectively,our findings underscore the potential of PDMSCs in alleviating oxidative stress injury and secondary brain injury in the pathological process of TBI.展开更多
BACKGROUND Cartilage defects are some of the most common causes of arthritis.Cartilage lesions caused by inflammation,trauma or degenerative disease normally result in osteochondral defects.Previous studies have shown...BACKGROUND Cartilage defects are some of the most common causes of arthritis.Cartilage lesions caused by inflammation,trauma or degenerative disease normally result in osteochondral defects.Previous studies have shown that decellularized extracellular matrix(ECM)derived from autologous,allogenic,or xenogeneic mesenchymal stromal cells(MSCs)can effectively restore osteochondral integrity.AIM To determine whether the decellularized ECM of antler reserve mesenchymal cells(RMCs),a xenogeneic material from antler stem cells,is superior to the currently available treatments for osteochondral defects.METHODS We isolated the RMCs from a 60-d-old sika deer antler and cultured them in vitro to 70%confluence;50 mg/mL L-ascorbic acid was then added to the medium to stimulate ECM deposition.Decellularized sheets of adipocyte-derived MSCs(aMSCs)and antlerogenic periosteal cells(another type of antler stem cells)were used as the controls.Three weeks after ascorbic acid stimulation,the ECM sheets were harvested and applied to the osteochondral defects in rat knee joints.RESULTS The defects were successfully repaired by applying the ECM-sheets.The highest quality of repair was achieved in the RMC-ECM group both in vitro(including cell attachment and proliferation),and in vivo(including the simultaneous regeneration of well-vascularized subchondral bone and avascular articular hyaline cartilage integrated with surrounding native tissues).Notably,the antler-stem-cell-derived ECM(xenogeneic)performed better than the aMSC-ECM(allogenic),while the ECM of the active antler stem cells was superior to that of the quiescent antler stem cells.CONCLUSION Decellularized xenogeneic ECM derived from the antler stem cell,particularly the active form(RMC-ECM),can achieve high quality repair/reconstruction of osteochondral defects,suggesting that selection of decellularized ECM for such repair should be focused more on bioactivity rather than kinship.展开更多
In this paper, the matrix Riccati equation is considered. There is no general way for solving the matrix Riccati equation despite the many fields to which it applies. While scalar Riccati equation has been studied tho...In this paper, the matrix Riccati equation is considered. There is no general way for solving the matrix Riccati equation despite the many fields to which it applies. While scalar Riccati equation has been studied thoroughly, matrix Riccati equation of which scalar Riccati equations is a particular case, is much less investigated. This article proposes a change of variable that allows to find explicit solution of the Matrix Riccati equation. We then apply this solution to Optimal Control.展开更多
BACKGROUND Increasing data indicated that long noncoding RNAs(lncRNAs)were directly or indirectly involved in the occurrence and development of tumors,including hepatocellular carcinoma(HCC).Recent studies had found t...BACKGROUND Increasing data indicated that long noncoding RNAs(lncRNAs)were directly or indirectly involved in the occurrence and development of tumors,including hepatocellular carcinoma(HCC).Recent studies had found that the expression of lncRNA HAND2-AS1 was downregulated in HCC tissues,but its role in HCC progression is unclear.Ultrasound targeted microbubble destruction mediated gene transfection is a new method to overexpress genes.AIM To study the role of ultrasound microbubbles(UTMBs)mediated HAND2-AS1 in the progression of HCC,in order to provide a new reference for the treatment of HCC.METHODS In vitro,we transfected HAND2-AS1 siRNA into HepG2 cells by UTMBs,and detected cell proliferation,apoptosis,invasion and epithelial-mesenchymal transition(EMT)by cell counting kit-8 assay,flow cytometry,Transwell invasion assay and Western blotting,respectively.In addition,we transfected miR-837-5p mimic into UTMBs treated cells and observed the changes of cell behavior.Next,the UTMBs treated HepG2 cells were transfected together with miR-837-5p mimic and tissue inhibitor of matrix metalloproteinase-2(TIMP2)overexpression vector,and we detected cell proliferation,apoptosis,invasion and EMT.In vivo,we established a mouse model of subcutaneous transplantation of HepG2 cells and observed the effect of HAND2-AS1 silencing on tumor formation ability.RESULTS We found that UTMBs carrying HAND2-AS1 restricted cell proliferation,invasion,and EMT,encouraged apoptosis,and HAND2-AS1 silencing eliminated the effect of UTMBs.Additionally,miR-873-5p targets the gene HAND2-AS1,which also targets the 3’UTR of TIMP2.And miR-873-5p mimic counteracted the impact of HAND2-AS1.Further,miR-873-5p mimic solely or in combination with pcDNA-TIMP2 had been transformed into HepG2 cells exposed to UTMBs.We discovered that TIMP2 reversed the effect of miR-873-5p mimic caused by the blocked signalling cascade for matrix metalloproteinase(MMP)2/MMP9.In vivo results showed that HAND2-AS1 silencing significantly inhibited tumor formation in mice.CONCLUSION LncRNA HAND2-AS1 promotes TIMP2 expression by targeting miR-873-5p to inhibit HepG2 cell growth and delay HCC progression.展开更多
Current methods for predicting missing values in datasets often rely on simplistic approaches such as taking median value of attributes, limiting their applicability. Real-world observations can be diverse, taking sto...Current methods for predicting missing values in datasets often rely on simplistic approaches such as taking median value of attributes, limiting their applicability. Real-world observations can be diverse, taking stock price as example, ranging from prices post-IPO to values before a company’s collapse, or instances where certain data points are missing due to stock suspension. In this paper, we propose a novel approach using Nonlinear Matrix Completion (NIMC) and Deep Matrix Completion (DIMC) to predict associations, and conduct experiment on financial data between dates and stocks. Our method leverages various types of stock observations to capture latent factors explaining the observed date-stock associations. Notably, our approach is nonlinear, making it suitable for datasets with nonlinear structures, such as the Russell 3000. Unlike traditional methods that may suffer from information loss, NIMC and DIMC maintain nearly complete information, especially in high-dimensional parameters. We compared our approach with state-of-the-art linear methods, including Inductive Matrix Completion, Nonlinear Inductive Matrix Completion, and Deep Inductive Matrix Completion. Our findings show that the nonlinear matrix completion method is particularly effective for handling nonlinear structured data, as exemplified by the Russell 3000. Additionally, we validate the information loss of the three methods across different dimensionalities.展开更多
A number of previous papers have studied the problem of recovering low-rank matrices with noise, further combining the noisy and perturbed cases, we propose a nonconvex Schatten p-norm minimization method to deal with...A number of previous papers have studied the problem of recovering low-rank matrices with noise, further combining the noisy and perturbed cases, we propose a nonconvex Schatten p-norm minimization method to deal with the recovery of fully perturbed low-rank matrices. By utilizing the p-null space property (p-NSP) and the p-restricted isometry property (p-RIP) of the matrix, sufficient conditions to ensure that the stable and accurate reconstruction for low-rank matrix in the case of full perturbation are derived, and two upper bound recovery error estimation ns are given. These estimations are characterized by two vital aspects, one involving the best r-approximation error and the other concerning the overall noise. Specifically, this paper obtains two new error upper bounds based on the fact that p-RIP and p-NSP are able to recover accurately and stably low-rank matrix, and to some extent improve the conditions corresponding to RIP.展开更多
Traumatic painful neuroma is an intractable clinical disease characterized by improper extracellular matrix(ECM)deposition around the injury site.Studies have shown that the microstructure of natural nerves provides a...Traumatic painful neuroma is an intractable clinical disease characterized by improper extracellular matrix(ECM)deposition around the injury site.Studies have shown that the microstructure of natural nerves provides a suitable microenvironment for the nerve end to avoid abnormal hyperplasia and neuroma formation.In this study,we used a decellularized nerve matrix scaffold(DNM-S)to prevent against the formation of painful neuroma after sciatic nerve transection in rats.Our results showed that the DNM-S effectively reduced abnormal deposition of ECM,guided the regeneration and orderly arrangement of axon,and decreased the density of regenerated axons.The epineurium-perilemma barrier prevented the invasion of vascular muscular scar tissue,greatly reduced the invasion ofα-smooth muscle actin-positive myofibroblasts into nerve stumps,effectively inhibited scar formation,which guided nerve stumps to gradually transform into a benign tissue and reduced pain and autotomy behaviors in animals.These findings suggest that DNM-S-optimized neuroma microenvironment by ECM remodeling may be a promising strategy to prevent painful traumatic neuromas.展开更多
At present,there are no resto rative therapies in the clinic for spinal cord injury,with current treatments offering only palliative treatment options.The role of matrix metalloproteases is well established in spinal ...At present,there are no resto rative therapies in the clinic for spinal cord injury,with current treatments offering only palliative treatment options.The role of matrix metalloproteases is well established in spinal cord injury,howeve r,translation into the clinical space was plagued by early designs of matrix metalloprotease inhibitors that lacked specificity and fears of musculos keletal syndrome prevented their further development.Newe r,much more specific matrix metalloprotease inhibitors have revived the possibility of using these inhibitors in the clinic since they are much more specific to their to rget matrix metalloproteases.Here,the evidence for use of matrix metalloproteases after spinal cord injury is reviewed and researche rs are urged to overcome their old fears rega rding matrix metalloprotease inhibition and possible side effects for the field to progress.Recently published work by us shows that inhibition of specific matrix metalloproteases after spinal cord injury holds promise since four key consequences of spinal cord injury could be alleviated by specific,next-gene ration matrix metalloprotease inhibitors.For example,specific inhibition of matrix metalloprotease-9 and matrix metalloprotease-12 within 24 hours after injury and for 3 days,alleviates spinal cord injury-induced edema,blood-s pinal co rd barrier breakdown,neuro pathic pain and resto res sensory and locomotor function.Attempts are now underway to translate this therapy into the clinic.展开更多
The tight oil formation develops with microfractures and matrix pores,it is important to study the influence of matrix physical properties on flow characteristics.At first,the representative fracture and matrix sample...The tight oil formation develops with microfractures and matrix pores,it is important to study the influence of matrix physical properties on flow characteristics.At first,the representative fracture and matrix samples are selected respectively in the dual media,the fracture and matrix digital rocks are constructed with micro-CT scanning at different resolutions,and the corresponding fracture and matrix pore networks are extracted,respectively.Then,the modified integration method is proposed to build the dual network model containing both fracture and matrix pore-throat elements,while the geometric-topological structure equivalent matrix pores are generated to fill in the skeleton domain of fracture network,the constructed dual network could describe the geometric-topological structure characteristics of fracture and matrix pore-throat simultaneously.At last,by adjusting the matrix pore density and the matrix filling domain factor,a series of dual network models are obtained to analyze the influence of matrix physical properties on flow characteristics in dual-media.It can be seen that the matrix system contributes more to the porosity of the dual media and less to the permeability.With the decrease in matrix pore density,the porosity/permeability contributions of matrix system to dual media keep decreasing,but the decrease is not significant,the oil-water co-flow zone decreases and the irreducible water saturation increases,and the saturation interval dominated by the fluid flow in the fracture keeps increasing.With the decrease in matrix filling domain factor,the porosity/permeability contributions of matrix system to dual media decreases,the oil-water co-flow zone increases and the irreducible water saturation decreases,and the saturation interval dominated by the fluid flow in the fracture keeps increasing.The results can be used to explain the dual-media flow pattern under different matrix types and different fracture control volumes during tight oil production.展开更多
基金supported by the Construction of Prevention and Treatment System of Geriatric Syndromes Focusing on Disability and Dementia(No.21-1-2-2-zyyd-nsh)。
文摘Objective This study aimed to explore the association of single nucleotide polymorphisms(SNP)in the matrix metalloproteinase 2(MMP-2)signaling pathway and the risk of vascular senescence(VS).Methods In this cross-sectional study,between May and November 2022,peripheral venous blood of151 VS patients(case group)and 233 volunteers(control group)were collected.Fourteen SNPs were identified in five genes encoding the components of the MMP-2 signaling pathway,assessed through carotid-femoral pulse wave velocity(cf PWV),and analyzed using multivariate logistic regression.The multigene influence on the risk of VS was assessed using multifactor dimensionality reduction(MDR)and generalized multifactor dimensionality regression(GMDR)modeling.Results Within the multivariate logistic regression models,four SNPs were screened to have significant associations with VS:chemokine(C-C motif)ligand 2(CCL2)rs4586,MMP2 rs14070,MMP2rs7201,and MMP2 rs1053605.Carriers of the T/C genotype of MMP2 rs14070 had a 2.17-fold increased risk of developing VS compared with those of the C/C genotype,and those of the T/T genotype had a19.375-fold increased risk.CCL2 rs4586 and MMP-2 rs14070 exhibited the most significant interactions.Conclusion CCL2 rs4586,MMP-2 rs14070,MMP-2 rs7201,and MMP-2 rs1053605 polymorphisms were significantly associated with the risk of VS.
基金This study was reviewed and approved by the UT Health Houston Institutional Review Board(approval No.HSC-MS-23-0471).
文摘BACKGROUND Abdominal wall deficiencies or weakness are a common complication of tem-porary ostomies,and incisional hernias frequently develop after colostomy or ileostomy takedown.The use of synthetic meshes to reinforce the abdominal wall has reduced hernia occurrence.Biologic meshes have also been used to enhance healing,particularly in contaminated conditions.Reinforced tissue matrices(R-TMs),which include a biologic scaffold of native extracellular matrix and a syn-thetic component for added strength/durability,are designed to take advantage of aspects of both synthetic and biologic materials.To date,RTMs have not been reported to reinforce the abdominal wall following stoma reversal.METHODS Twenty-eight patients were selected with a parastomal and/or incisional hernia who had received a temporary ileostomy or colostomy for fecal diversion after rectal cancer treatment or trauma.Following hernia repair and proximal stoma closure,RTM(OviTex®1S permanent or OviTex®LPR)was placed to reinforce the abdominal wall using a laparoscopic,robotic,or open surgical approach.Post-operative follow-up was performed at 1 month and 1 year.Hernia recurrence was determined by physical examination and,when necessary,via computed tomo-graphy scan.Secondary endpoints included length of hospital stay,time to return to work,and hospital readmissions.Evaluated complications of the wound/repair site included presence of surgical site infection,seroma,hematoma,wound dehiscence,or fistula formation.RESULTS The observational study cohort included 16 male and 12 female patients with average age of 58.5 years±16.3 years and average body mass index of 26.2 kg/m^(2)±4.1 kg/m^(2).Patients presented with a parastomal hernia(75.0%),in-cisional hernia(14.3%),or combined parastomal/incisional hernia(10.7%).Using a laparoscopic(53.6%),robotic(35.7%),or open(10.7%)technique,RTMs(OviTex®LPR:82.1%,OviTex®1S:17.9%)were placed using sublay(82.1%)or intraperitoneal onlay(IPOM;17.9%)mesh positioning.At 1-month and 1-year follow-ups,there were no hernia recurrences(0%).Average hospital stays were 2.1 d±1.2 d and return to work occurred at 8.3 post-operative days±3.0 post-operative days.Three patients(10.7%)were readmitted before the 1-month follow up due to mesh infection and/or gastrointestinal issues.Fistula and mesh infection were observed in two patients each(7.1%),leading to partial mesh removal in one patient(3.6%).There were no complications between 1 month and 1 year(0%).CONCLUSION RTMs were used successfully to treat parastomal and incisional hernias at ileostomy reversal,with no hernia recurrences and favorable outcomes after 1-month and 1-year.
文摘BACKGROUND Frey syndrome,also known as ototemporal nerve syndrome or gustatory sweating syndrome,is one of the most common complications of parotid gland surgery.This condition is characterized by abnormal sensations in the facial skin accompanied by episodes of flushing and sweating triggered by cognitive processes,visual stimuli,or eating.AIM To investigate the preventive effect of acellular dermal matrix(ADM)on Frey syndrome after parotid tumor resection and analyzed the effects of Frey syndrome across various surgical methods and other factors involved in parotid tumor resection.METHODS Retrospective data from 82 patients were analyzed to assess the correlation between sex,age,resection sample size,operation time,operation mode,ADM usage,and occurrence of postoperative Frey syndrome.RESULTS Among the 82 patients,the incidence of Frey syndrome was 56.1%.There were no significant differences in sex,age,or operation time between the two groups(P>0.05).However,there was a significant difference between ADM implantation and occurrence of Frey syndrome(P<0.05).ADM application could reduce the variation in the incidence of Frey syndrome across different operation modes.CONCLUSION ADM can effectively prevent Frey syndrome and delay its onset.
基金This study was supported by Basic Research Project from Jiangmen Science and Technology Bureau(Grant No.2220002000356)China University of Petroleum(Beijing)(Grand No.2462023BJRC007)The Guangdong Basic and Applied Basic Research Foundation(No.2022A1515110376).
文摘In regard to unconventional oil reservoirs,the transient dual-porosity and triple-porosity models have been adopted to describe the fluid flow in the complex fracture network.It has been proven to cause inaccurate production evaluations because of the absence of matrix-macrofracture communication.In addition,most of the existing models are solved analytically based on Laplace transform and numerical inversion.Hence,an approximate analytical solution is derived directly in real-time space considering variable matrix blocks and simultaneous matrix depletion.To simplify the derivation,the simultaneous matrix depletion is divided into two parts:one part feeding the macrofractures and the other part feeding the microfractures.Then,a series of partial differential equations(PDEs)describing the transient flow and boundary conditions are constructed and solved analytically by integration.Finally,a relationship between oil rate and production time in real-time space is obtained.The new model is verified against classical analytical models.When the microfracture system and matrix-macrofracture communication is neglected,the result of the new model agrees with those obtained with the dual-porosity and triple-porosity model,respectively.Certainly,the new model also has an excellent agreement with the numerical model.The model is then applied to two actual tight oil wells completed in western Canada sedimentary basin.After identifying the flow regime,the solution suitably matches the field production data,and the model parameters are determined.Through these output parameters,we can accurately forecast the production and even estimate the petrophysical properties.
基金supported by grants from the Biotechnology and Biological Sciences Research Council(Nos.BBSRC LO21071/and BB/L00609X/1)UK Regenerative Medicine Platform Hub Acellular Approaches for Therapeutic Delivery(No.MR/K026682/1)+3 种基金Acellular Hub,SMART Materials 3D Architecture(No.MR/R015651/1)the UK Regenerative Medicine Platform(No.MR/L012626/1 Southampton Imaging)to ROCOMRCAMED Regenerative Medicine and Stem Cell Research Initiative(No.MR/V00543X/1)to JID,ROCO and YHKGC acknowledges funding from AIRC Aldi Fellowship under grant agreement No.25412.
文摘Autograft or metal implants are routinely used in skeletal repair.However,they fail to provide long-term clinical resolution,necessitating a functional biomimetic tissue engineering alternative.The use of native human bone tissue for synthesizing a biomimeticmaterial inkfor three-dimensional(3D)bioprintingof skeletal tissueis anattractivestrategyfor tissueregeneration.Thus,human bone extracellular matrix(bone-ECM)offers an exciting potential for the development of an appropriate microenvironment for human bone marrow stromal cells(HBMSCs)to proliferate and differentiate along the osteogenic lineage.In this study,we engineered a novel material ink(LAB)by blending human bone-ECM(B)with nanoclay(L,Laponite®)and alginate(A)polymers using extrusion-based deposition.The inclusion of the nanofiller and polymeric material increased the rheology,printability,and drug retention properties and,critically,the preservation of HBMSCs viability upon printing.The composite of human bone-ECM-based 3D constructs containing vascular endothelial growth factor(VEGF)enhanced vascularization after implantation in an ex vivo chick chorioallantoic membrane(CAM)model.The inclusion of bone morphogenetic protein-2(BMP-2)with the HBMSCs further enhanced vascularization and mineralization after only seven days.This study demonstrates the synergistic combination of nanoclay with biomimetic materials(alginate and bone-ECM)to support the formation of osteogenic tissue both in vitro and ex vivo and offers a promising novel 3D bioprinting approach to personalized skeletal tissue repair.
基金We would like to thank the associate editor and the reviewers for their constructive comments.This work was supported in part by the National Natural Science Foundation of China under Grant 62203234in part by the State Key Laboratory of Robotics of China under Grant 2023-Z03+1 种基金in part by the Natural Science Foundation of Liaoning Province under Grant 2023-BS-025in part by the Research Program of Liaoning Liaohe Laboratory under Grant LLL23ZZ-02-02.
文摘High-precision and real-time diagnosis of sucker rod pumping system(SRPS)is important for quickly mastering oil well operations.Deep learning-based method for classifying the dynamometer card(DC)of oil wells is an efficient diagnosis method.However,the input of the DC as a two-dimensional image into the deep learning framework suffers from low feature utilization and high computational effort.Additionally,different SRPSs in an oil field have various system parameters,and the same SRPS generates different DCs at different moments.Thus,there is heterogeneity in field data,which can dramatically impair the diagnostic accuracy.To solve the above problems,a working condition recognition method based on 4-segment time-frequency signature matrix(4S-TFSM)and deep learning is presented in this paper.First,the 4-segment time-frequency signature(4S-TFS)method that can reduce the computing power requirements is proposed for feature extraction of DC data.Subsequently,the 4S-TFSM is constructed by relative normalization and matrix calculation to synthesize the features of multiple data and solve the problem of data heterogeneity.Finally,a convolutional neural network(CNN),one of the deep learning frameworks,is used to determine the functioning conditions based on the 4S-TFSM.Experiments on field data verify that the proposed diagnostic method based on 4S-TFSM and CNN(4S-TFSM-CNN)can significantly improve the accuracy of working condition recognition with lower computational cost.To the best of our knowledge,this is the first work to discuss the effect of data heterogeneity on the working condition recognition performance of SRPS.
基金supported by National Key Research and Development Program of China under Grant 2020YFB1804901State Key Laboratory of Rail Traffic Control and Safety(Contract:No.RCS2022ZT 015)Special Key Project of Technological Innovation and Application Development of Chongqing Science and Technology Bureau(cstc2019jscx-fxydX0053).
文摘Spatial covariance matrix(SCM) is essential in many multi-antenna systems such as massive multiple-input multiple-output(MIMO). For multi-antenna systems operating at millimeter-wave bands, hybrid analog-digital structure has been widely adopted to reduce the cost of radio frequency chains.In this situation, signals received at the antennas are unavailable to the digital receiver, and as a consequence, traditional sample average approach cannot be used for SCM reconstruction in hybrid multi-antenna systems. To address this issue, beam sweeping algorithm(BSA) which can reconstruct the SCM effectively for a hybrid uniform linear array, has been proposed in our previous works. However, direct extension of BSA to a hybrid uniform circular array(UCA)will result in a huge computational burden. To this end, a low-complexity approach is proposed in this paper. By exploiting the symmetry features of SCM for the UCA, the number of unknowns can be reduced significantly and thus the complexity of reconstruction can be saved accordingly. Furthermore, an insightful analysis is also presented in this paper, showing that the reduction of the number of unknowns can also improve the accuracy of the reconstructed SCM. Simulation results are also shown to demonstrate the proposed approach.
基金the Key Projects of Equipment Pre-research Foundation of the Ministry of Equipment Development of the Central Military Commission of China (No.6140922010201)the Key R&D Plan of Zhenjiang in 2018(No.GY2018021)。
文摘The performance of solid solution aging treatment on aluminum matrix composites prepared by powder metallurgy and reinforced with 6061 aluminum alloy powder as matrix;meanwhile, nano silicon carbide particles(nm Si Cp), submicron silicon carbide particles(1 μm Si Cp) and Ti particles were studied. The Al/Si Cp composite powder was prepared by high-energy ball milling, and then cold-pressed, sintered, hotextruded, and then heat-treated with different solution temperatures and aging times for the extruded composites. Optical microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy(EDS), X-ray diffractometer(XRD) and extrusion testing were used to analyze and test the microstructure and mechanical properties of aluminum matrix composites. The results show that after the multi-stage solid solution at 530 ℃×2 h+535 ℃×2 h+540 ℃×2 h, the particles are mainly equiaxed grains and uniformly distributed. There is no reinforcement agglomeration, and the surface is dense and the insoluble phase is basically dissolved. In the matrix, the strengthening effect is good, and the hardness and compressive strength are 179.43 HV and 680.42 MPa, respectively. Under this solution process, when the aluminum matrix composites are aged at 170 ℃ for 10 h, the hardness and compressive strength can reach their peaks and increase to 195.82 HV and 721.48 MPa, respectively.
基金National Natural Science Foundation of China under Grant No.61973037China Postdoctoral Science Foundation under Grant No.2022M720419。
文摘Automatic modulation recognition(AMR)of radiation source signals is a research focus in the field of cognitive radio.However,the AMR of radiation source signals at low SNRs still faces a great challenge.Therefore,the AMR method of radiation source signals based on two-dimensional data matrix and improved residual neural network is proposed in this paper.First,the time series of the radiation source signals are reconstructed into two-dimensional data matrix,which greatly simplifies the signal preprocessing process.Second,the depthwise convolution and large-size convolutional kernels based residual neural network(DLRNet)is proposed to improve the feature extraction capability of the AMR model.Finally,the model performs feature extraction and classification on the two-dimensional data matrix to obtain the recognition vector that represents the signal modulation type.Theoretical analysis and simulation results show that the AMR method based on two-dimensional data matrix and improved residual network can significantly improve the accuracy of the AMR method.The recognition accuracy of the proposed method maintains a high level greater than 90% even at -14 dB SNR.
基金supported by Project of Chongqing Science and Technology Bureau (cstc2022jxjl0005)。
文摘This study aimed to investigate the pollution characteristics, source apportionment, and health risks associated with trace metal(loid)s(TMs) in the major agricultural producing areas in Chongqing, China. We analyzed the source apportionment and assessed the health risk of TMs in agricultural soils by using positive matrix factorization(PMF) model and health risk assessment(HRA) model based on Monte Carlo simulation. Meanwhile, we combined PMF and HRA models to explore the health risks of TMs in agricultural soils by different pollution sources to determine the priority control factors. Results showed that the average contents of cadmium(Cd), arsenic (As), lead(Pb), chromium(Cr), copper(Cu), nickel(Ni), and zinc(Zn) in the soil were found to be 0.26, 5.93, 27.14, 61.32, 23.81, 32.45, and 78.65 mg/kg, respectively. Spatial analysis and source apportionment analysis revealed that urban and industrial sources, agricultural sources, and natural sources accounted for 33.0%, 27.7%, and 39.3% of TM accumulation in the soil, respectively. In the HRA model based on Monte Carlo simulation, noncarcinogenic risks were deemed negligible(hazard index <1), the carcinogenic risks were at acceptable level(10^(-6)<total carcinogenic risk ≤ 10^(-4)), with higher risks observed for children compared to adults. The relationship between TMs, their sources, and health risks indicated that urban and industrial sources were primarily associated with As, contributing to 75.1% of carcinogenic risks and 55.7% of non-carcinogenic risks, making them the primary control factors. Meanwhile, agricultural sources were primarily linked to Cd and Pb, contributing to 13.1% of carcinogenic risks and 21.8% of non-carcinogenic risks, designating them as secondary control factors.
基金financially supported by the Key Research Projects of Ningxia Hui Autonomous Region of China under Grant No.2018BCG01002(to HCX).
文摘Background:As a form of biological therapy,placenta-derived mesenchymal stem cells(PDMSCs)exhibit considerable promise in addressing the complex pathological processes of traumaticbrain injury(TBI)due to their multi-target and multi-pathway mode of action.Material&Methods:This study investigates the protective mechanisms and benefits of PDMSCs in mitigating the effects of controlled cortical impact(CCI)in rats and glutamate-induced oxidative stress injury in HT22 cells in vitro.Our primary objective is to provide evidence supporting the clinical application of PDMSCs.Results:In the in vivo arm of our investigation,we observed a swift elevation of matrix metalloproteinase-9(MMP-9)in the proximal cortex of injured brain tissues after CCI.PDMSCs,distinguished by their heightened expression of metalloproteinase tissue inhibitors-1 and-2(TIMP-1 and TIMP-2):were intravenously administered via the caudal vein.This intervention yielded significant reductions in the permeability of the blood-brain barrier(BBB):the extent of brain edema,the levels of inflammatory cytokines IL-1βand TNF-αin damaged brain tissue,and the activation status of microglia in CCI-afflicted rats.In the realm of in vitro experiments,PDMSC-conditioned media demonstrated substantial reductions in mortality rates and cleaved caspase-3 levels in glutamate-induced HT22 cells compared with conventional media.Notably,this advantage was negated upon the introduction of neutralizing antibodies targeting TIMP-1 and TIMP-2.Conclusion:Collectively,our findings underscore the potential of PDMSCs in alleviating oxidative stress injury and secondary brain injury in the pathological process of TBI.
基金National Natural Science Foundation of China,No.U20A20403This study was conducted in accordance with the Animal Ethics Committee of the Institute of Antler Science and Product Technology,Changchun Sci-Tech University(AEC No:CKARI202309).
文摘BACKGROUND Cartilage defects are some of the most common causes of arthritis.Cartilage lesions caused by inflammation,trauma or degenerative disease normally result in osteochondral defects.Previous studies have shown that decellularized extracellular matrix(ECM)derived from autologous,allogenic,or xenogeneic mesenchymal stromal cells(MSCs)can effectively restore osteochondral integrity.AIM To determine whether the decellularized ECM of antler reserve mesenchymal cells(RMCs),a xenogeneic material from antler stem cells,is superior to the currently available treatments for osteochondral defects.METHODS We isolated the RMCs from a 60-d-old sika deer antler and cultured them in vitro to 70%confluence;50 mg/mL L-ascorbic acid was then added to the medium to stimulate ECM deposition.Decellularized sheets of adipocyte-derived MSCs(aMSCs)and antlerogenic periosteal cells(another type of antler stem cells)were used as the controls.Three weeks after ascorbic acid stimulation,the ECM sheets were harvested and applied to the osteochondral defects in rat knee joints.RESULTS The defects were successfully repaired by applying the ECM-sheets.The highest quality of repair was achieved in the RMC-ECM group both in vitro(including cell attachment and proliferation),and in vivo(including the simultaneous regeneration of well-vascularized subchondral bone and avascular articular hyaline cartilage integrated with surrounding native tissues).Notably,the antler-stem-cell-derived ECM(xenogeneic)performed better than the aMSC-ECM(allogenic),while the ECM of the active antler stem cells was superior to that of the quiescent antler stem cells.CONCLUSION Decellularized xenogeneic ECM derived from the antler stem cell,particularly the active form(RMC-ECM),can achieve high quality repair/reconstruction of osteochondral defects,suggesting that selection of decellularized ECM for such repair should be focused more on bioactivity rather than kinship.
文摘In this paper, the matrix Riccati equation is considered. There is no general way for solving the matrix Riccati equation despite the many fields to which it applies. While scalar Riccati equation has been studied thoroughly, matrix Riccati equation of which scalar Riccati equations is a particular case, is much less investigated. This article proposes a change of variable that allows to find explicit solution of the Matrix Riccati equation. We then apply this solution to Optimal Control.
文摘BACKGROUND Increasing data indicated that long noncoding RNAs(lncRNAs)were directly or indirectly involved in the occurrence and development of tumors,including hepatocellular carcinoma(HCC).Recent studies had found that the expression of lncRNA HAND2-AS1 was downregulated in HCC tissues,but its role in HCC progression is unclear.Ultrasound targeted microbubble destruction mediated gene transfection is a new method to overexpress genes.AIM To study the role of ultrasound microbubbles(UTMBs)mediated HAND2-AS1 in the progression of HCC,in order to provide a new reference for the treatment of HCC.METHODS In vitro,we transfected HAND2-AS1 siRNA into HepG2 cells by UTMBs,and detected cell proliferation,apoptosis,invasion and epithelial-mesenchymal transition(EMT)by cell counting kit-8 assay,flow cytometry,Transwell invasion assay and Western blotting,respectively.In addition,we transfected miR-837-5p mimic into UTMBs treated cells and observed the changes of cell behavior.Next,the UTMBs treated HepG2 cells were transfected together with miR-837-5p mimic and tissue inhibitor of matrix metalloproteinase-2(TIMP2)overexpression vector,and we detected cell proliferation,apoptosis,invasion and EMT.In vivo,we established a mouse model of subcutaneous transplantation of HepG2 cells and observed the effect of HAND2-AS1 silencing on tumor formation ability.RESULTS We found that UTMBs carrying HAND2-AS1 restricted cell proliferation,invasion,and EMT,encouraged apoptosis,and HAND2-AS1 silencing eliminated the effect of UTMBs.Additionally,miR-873-5p targets the gene HAND2-AS1,which also targets the 3’UTR of TIMP2.And miR-873-5p mimic counteracted the impact of HAND2-AS1.Further,miR-873-5p mimic solely or in combination with pcDNA-TIMP2 had been transformed into HepG2 cells exposed to UTMBs.We discovered that TIMP2 reversed the effect of miR-873-5p mimic caused by the blocked signalling cascade for matrix metalloproteinase(MMP)2/MMP9.In vivo results showed that HAND2-AS1 silencing significantly inhibited tumor formation in mice.CONCLUSION LncRNA HAND2-AS1 promotes TIMP2 expression by targeting miR-873-5p to inhibit HepG2 cell growth and delay HCC progression.
文摘Current methods for predicting missing values in datasets often rely on simplistic approaches such as taking median value of attributes, limiting their applicability. Real-world observations can be diverse, taking stock price as example, ranging from prices post-IPO to values before a company’s collapse, or instances where certain data points are missing due to stock suspension. In this paper, we propose a novel approach using Nonlinear Matrix Completion (NIMC) and Deep Matrix Completion (DIMC) to predict associations, and conduct experiment on financial data between dates and stocks. Our method leverages various types of stock observations to capture latent factors explaining the observed date-stock associations. Notably, our approach is nonlinear, making it suitable for datasets with nonlinear structures, such as the Russell 3000. Unlike traditional methods that may suffer from information loss, NIMC and DIMC maintain nearly complete information, especially in high-dimensional parameters. We compared our approach with state-of-the-art linear methods, including Inductive Matrix Completion, Nonlinear Inductive Matrix Completion, and Deep Inductive Matrix Completion. Our findings show that the nonlinear matrix completion method is particularly effective for handling nonlinear structured data, as exemplified by the Russell 3000. Additionally, we validate the information loss of the three methods across different dimensionalities.
文摘A number of previous papers have studied the problem of recovering low-rank matrices with noise, further combining the noisy and perturbed cases, we propose a nonconvex Schatten p-norm minimization method to deal with the recovery of fully perturbed low-rank matrices. By utilizing the p-null space property (p-NSP) and the p-restricted isometry property (p-RIP) of the matrix, sufficient conditions to ensure that the stable and accurate reconstruction for low-rank matrix in the case of full perturbation are derived, and two upper bound recovery error estimation ns are given. These estimations are characterized by two vital aspects, one involving the best r-approximation error and the other concerning the overall noise. Specifically, this paper obtains two new error upper bounds based on the fact that p-RIP and p-NSP are able to recover accurately and stably low-rank matrix, and to some extent improve the conditions corresponding to RIP.
基金supported by the National Natural Science Foundation of China,No.82171650(to CBZ)Guangdong Province Key Research and Development Project,No.2020B1111150003(to DPQ)Guangdong Basic and Applied Basic Research Foundation,No.2020A1515011143(to CBZ)。
文摘Traumatic painful neuroma is an intractable clinical disease characterized by improper extracellular matrix(ECM)deposition around the injury site.Studies have shown that the microstructure of natural nerves provides a suitable microenvironment for the nerve end to avoid abnormal hyperplasia and neuroma formation.In this study,we used a decellularized nerve matrix scaffold(DNM-S)to prevent against the formation of painful neuroma after sciatic nerve transection in rats.Our results showed that the DNM-S effectively reduced abnormal deposition of ECM,guided the regeneration and orderly arrangement of axon,and decreased the density of regenerated axons.The epineurium-perilemma barrier prevented the invasion of vascular muscular scar tissue,greatly reduced the invasion ofα-smooth muscle actin-positive myofibroblasts into nerve stumps,effectively inhibited scar formation,which guided nerve stumps to gradually transform into a benign tissue and reduced pain and autotomy behaviors in animals.These findings suggest that DNM-S-optimized neuroma microenvironment by ECM remodeling may be a promising strategy to prevent painful traumatic neuromas.
文摘At present,there are no resto rative therapies in the clinic for spinal cord injury,with current treatments offering only palliative treatment options.The role of matrix metalloproteases is well established in spinal cord injury,howeve r,translation into the clinical space was plagued by early designs of matrix metalloprotease inhibitors that lacked specificity and fears of musculos keletal syndrome prevented their further development.Newe r,much more specific matrix metalloprotease inhibitors have revived the possibility of using these inhibitors in the clinic since they are much more specific to their to rget matrix metalloproteases.Here,the evidence for use of matrix metalloproteases after spinal cord injury is reviewed and researche rs are urged to overcome their old fears rega rding matrix metalloprotease inhibition and possible side effects for the field to progress.Recently published work by us shows that inhibition of specific matrix metalloproteases after spinal cord injury holds promise since four key consequences of spinal cord injury could be alleviated by specific,next-gene ration matrix metalloprotease inhibitors.For example,specific inhibition of matrix metalloprotease-9 and matrix metalloprotease-12 within 24 hours after injury and for 3 days,alleviates spinal cord injury-induced edema,blood-s pinal co rd barrier breakdown,neuro pathic pain and resto res sensory and locomotor function.Attempts are now underway to translate this therapy into the clinic.
基金This work was supported by National Natural Science Foundation of China(No.51704033,No.51804038)PetroChina Innovation Foundation(No.2018D-5007-0210).
文摘The tight oil formation develops with microfractures and matrix pores,it is important to study the influence of matrix physical properties on flow characteristics.At first,the representative fracture and matrix samples are selected respectively in the dual media,the fracture and matrix digital rocks are constructed with micro-CT scanning at different resolutions,and the corresponding fracture and matrix pore networks are extracted,respectively.Then,the modified integration method is proposed to build the dual network model containing both fracture and matrix pore-throat elements,while the geometric-topological structure equivalent matrix pores are generated to fill in the skeleton domain of fracture network,the constructed dual network could describe the geometric-topological structure characteristics of fracture and matrix pore-throat simultaneously.At last,by adjusting the matrix pore density and the matrix filling domain factor,a series of dual network models are obtained to analyze the influence of matrix physical properties on flow characteristics in dual-media.It can be seen that the matrix system contributes more to the porosity of the dual media and less to the permeability.With the decrease in matrix pore density,the porosity/permeability contributions of matrix system to dual media keep decreasing,but the decrease is not significant,the oil-water co-flow zone decreases and the irreducible water saturation increases,and the saturation interval dominated by the fluid flow in the fracture keeps increasing.With the decrease in matrix filling domain factor,the porosity/permeability contributions of matrix system to dual media decreases,the oil-water co-flow zone increases and the irreducible water saturation decreases,and the saturation interval dominated by the fluid flow in the fracture keeps increasing.The results can be used to explain the dual-media flow pattern under different matrix types and different fracture control volumes during tight oil production.
