BACKGROUND The relation between orthodontic treatment and temporomandibular disorders(TMDs)is under debate;the management of TMD during orthodontic treatment has always been a challenge.If TMD symptoms occur during or...BACKGROUND The relation between orthodontic treatment and temporomandibular disorders(TMDs)is under debate;the management of TMD during orthodontic treatment has always been a challenge.If TMD symptoms occur during orthodontic treatment,an immediate pause of orthodontic adjustments is recommended;the treatment can resume when the symptoms are managed and stabilized.CASE SUMMARY This case report presents a patient(26-year-old,female)with angle class I,skeletal class II and TMDs.The treatment was a hybrid of clear aligners,fixed appliances and temporary anchorage devices(TADs).After 3 mo resting and treatment on her TMD,the patient’s TMD symptom alleviated,but her anterior occlusion displayed deep overbite.Therefore,the fixed appliances with TAD were used to correct the anterior deep-bite and level maxillary and mandibular deep curves.After the levelling,the patient showed dual bite with centric relation and maximum intercuspation discrepancy on her occlusion.After careful examination of temporomandibular joints(TMJ)position,the stable bite splint and Invisible Mandibular Advancement appliance were used to reconstruct her occlusion.Eventually,the improved facial appearance and relatively stable occlusion were achieved.The 1-year follow-up records showed there was no obvious change in TMJ morphology,and her occlusion was stable.CONCLUSION TMD screening and monitoring is of great clinical importance in the TMD susceptible patients.Hybrid treatment with clear aligners and fixed appliances and TADs is an effective treatment modality for the complex cases.展开更多
BACKGROUND Mandibular retraction is the main etiological mechanism of class II malocclusion in China and the subsequent distal molar relationship can cause functional discomfort in mastication,breathing and the tempor...BACKGROUND Mandibular retraction is the main etiological mechanism of class II malocclusion in China and the subsequent distal molar relationship can cause functional discomfort in mastication,breathing and the temporomandibular joint.The use of mandibular advancement(MA)devices has recently emerged as an adolescent mandibular retraction treatment;however,current studies regarding the effect thereof are relatively few,and there is lack of sufficient clinical support.AIM To investigate the clinical effect of invisalign MA on the treatment of mandibular retraction in adolescents.METHODS This study included 30 adolescent patients who underwent treatment with the MA appliances from December 2017 to June 2021.The lateral cephalometric data before and after treatment were collected and imported into Dolphin Imaging software.The changes were measured by linear measurement superimposed with lateral cephalometric trajectory based on the Pancherz technology.RESULTS There was no significant difference in the length and position of maxilla before and after the treatment.The position of the mandible moved 3.13 mm,the length increased 4.14 mm,the mandibular ramus length increased 4.09 mm,the body length increased 4.25 mm,and the position of the condyle moved 1.03 mm forward after treatment.Additionally,changes in the incisor sagittal position and labial inclination were observed.The position of the upper incisor point moved back 1.33 mm,without statistical difference,the inclination and tooth angle decreased by 3.44°and 4.06°,respectively;the position of the lower incisor point was moved 2.98 mm,and the inclination and tooth angle increased by 2.62°and 1.23°,respectively.Furthermore,changes in the incisor overjet and molar relationship were seen.Overjet decreased by 4.31 mm,of which 1.78 mm was due to dental factors,accounting for 41.3%of the effect as opposed to 58.7%due to skeletal factors.Molar relationship improved 3.87 mm,with 1.34 mm due to dental factors,and dental and skeletal factors were accounted for 34.6%and 65.4%of the effect,respectively.CONCLUSION For adolescent patients with mandible retraction,invisalign MA can effectively promote the mandible growth,and it was proven to be mainly due to skeletal effects.展开更多
BACKGROUND: To evaluate the diagnostic accuracy of clinical signs combined with the tongue blade test(TBT) to detect maxillary and mandibular fractures.METHODS: A cross-sectional study enrolled patients with maxillary...BACKGROUND: To evaluate the diagnostic accuracy of clinical signs combined with the tongue blade test(TBT) to detect maxillary and mandibular fractures.METHODS: A cross-sectional study enrolled patients with maxillary and mandibular injuries in the emergency department. Physical examination and the TBT were performed, followed by radiological imaging(facial X-ray or computed tomography [CT]). The diagnostic accuracy was calculated for individuals and a combination of clinical findings at predicting maxillary and mandibular fractures.RESULTS: A total of 98 patients were identified, of whom 31.6% had maxillary fractures and9.2% had mandibular fractures. The combination of malocclusion, tenderness on palpation and swelling with positive TBT had 100% specificity to detect maxillary and mandibular fractures. In the absence of malocclusion, the combination of tenderness on palpation and swelling with positive TBT produced a specificity of 97.8% for maxillary fracture and a specificity of 96.2% for mandibular fracture. A clinical decision tool consisting of malocclusion, tenderness on palpation, swelling and TBT revealed a specificity of 100% and a positive predictive value of 100%.CONCLUSION: The clinical decision tool is potentially useful to rule out mandibular fractures,thus preventing unnecessary radiation exposure.展开更多
Middle-mesial canals in mandibular molars are present in the population depending on age, sex and ethnicity. However, limited literature alludes to its prevalence. Troughing procedures may enhance identification, clea...Middle-mesial canals in mandibular molars are present in the population depending on age, sex and ethnicity. However, limited literature alludes to its prevalence. Troughing procedures may enhance identification, cleaning and shaping. This case report expresses the recognition and management of middle-mesial canal in a mandibular second molar of 24 years old Hispanic-Latino male.展开更多
Background:This study aims to predict the extraction difficulty of mandibular third molars based on panoramic images using transfer learning while employing super-resolution(SR)technology to enhance the feasibility an...Background:This study aims to predict the extraction difficulty of mandibular third molars based on panoramic images using transfer learning while employing super-resolution(SR)technology to enhance the feasibility and validity of the prediction.Methods:We reviewed a total of 608 preoperative mandibular third molar panoramic radiographs from two medical facilities:the First Affiliated Hospital of Zhengzhou University(n=509;456 in the training set and 53 in the test set)and the Henan Provincial Dental Hospital(n=99 in the validation set).We conducted a deep-transfer learning network on high-resolution(HR)panoramic radiographs to improve the longitudinal resolution of the images and obtained the SR images.Subsequently,we constructed models named Model-HR and Model-SR using high-dimensional quantitative features extracted through the Least Absolute Shrinkage and Selection Operator method.The models’performances were evaluated using the receiver operating characteristic curve(ROC).To assess the reliability of the model,we compared the results from the test set with those of three dentists.Results:Model-SR outperformed Model-HR(area under the curve(AUC):0.779,sensitivity:85.5%,specificity:60.9%,and accuracy:79.8%vs.AUC:0.753,sensitivity:73.7%,specificity:73.9%,and accuracy:73.7%)in predicting the difficulty of extracting mandibular third molars.Both Model-HR(AUC=0.821,95%CI 0.687–0.956)and Model-SR(AUC=0.963,95%CI 0.921–0.999)demonstrated superior performance compared to expert dentists(highest AUC=0.799,95%CI 0.671–0.927).Conclusions:Model-SR yielded superior predictive performance in determining the difficulty of extracting mandibular third molars when compared with Model-HR and expert dentists’visual assessments.展开更多
In the evaluation of the beauty and functional integrity of the lower face, the oral cavity, teeth, mandible, maxilla, and the size and position of the tongue are important. The tongue locates forward and is larger th...In the evaluation of the beauty and functional integrity of the lower face, the oral cavity, teeth, mandible, maxilla, and the size and position of the tongue are important. The tongue locates forward and is larger than normal in prognathism, in which the jaw protrudes from the skull. It is not clear whether an enlarged tongue causes the open bite, protrusion or dental arch misalignment, or is a result of them. Here, we report two patients with mandibular prognathism and relative macroglossia, which were treated by mandibular setback surgery using a bilateral sagittal split osteotomy (BSSO) and excision of the tongue. This procedure achieved aesthetic improvement of the face and dentition.展开更多
Alveolar bone is the thickened ridge of jaw bone that supports teeth.It is subject to constant occlusal force and pathogens invasion,and is therefore under active bone remodeling and immunomodulation.Alveolar bone hol...Alveolar bone is the thickened ridge of jaw bone that supports teeth.It is subject to constant occlusal force and pathogens invasion,and is therefore under active bone remodeling and immunomodulation.Alveolar bone holds a distinct niche from long bone considering their different developmental origin and postnatal remodeling pattern.However,a systematic explanation of alveolar bone at single-cell level is still lacking.Here,we construct a single-cell atlas of mouse mandibular alveolar bone through single-cell RNA sequencing(scRNA-seq).A more active immune microenvironment is identified in alveolar bone,with a higher proportion of mature immune cells than in long bone.Among all immune cell populations,the monocyte/macrophage subpopulation most actively interacts with mesenchymal stem cells(MSCs)subpopulation.Alveolar bone monocytes/macrophages express a higher level of Oncostatin M(Osm)compared to long bone,which promotes osteogenic differentiation and inhibits adipogenic differentiation of MSCs.In summary,our study reveals a unique immune microenvironment of alveolar bone,which may provide a more precise immune-modulatory target for therapeutic treatment of oral diseases.展开更多
The aim of this study was to investigate the physiological foramen diameter, shape and distance between physiological and anatomical apex of maxillary and mandibular first and second molars. Accurate knowledge of the ...The aim of this study was to investigate the physiological foramen diameter, shape and distance between physiological and anatomical apex of maxillary and mandibular first and second molars. Accurate knowledge of the physiological foramina morphology; thus, inherent mechanical shaping technical hindrances, is decisive when taking the corresponding root canal final preparation decision. The morphological dimensions of a total of 1 727 physiological foramina were investigated by means of micro-computed tomography. Mean narrow and wide(to a high number, oval) diameters of the physiological foramen were 0.24,0.22 and 0.33 mm and 0.33, 0.31 and 0.42 mm in mesiobuccal(MB), distobuccal(DB) and palatal(P) roots in maxillary first molars; 0.24, 0.22 and 0.33 mm and 0.41, 0.33 and 0.44 in MB, DB, and P roots in maxillary second molars. Mandibular first molars showed mean narrow and wide diameters of 0.24 and 0.30 mm and of 0.39 and 0.46 mm in mesial(M) and distal(D)roots; second mandibular molars showed 0.25 and 0.31 mm and 0.47 mm in M and D roots. The mean distance between the physiological foramina and anatomical apex was 0.82, 0.81 and 1.02 mm and 0.54, 0.43 and 0.63 mm in MB, DB and P roots of the maxillary first and second molars, respectively. A mean distance of 0.95 mm(M) and 1.05 mm(D) in the first and0.78 mm(M) and 0.81 mm(D) in the second mandibular molars was observed. Based on the results obtained, assumable recommendations for final preparation size of the physiological foramen were calculated. However, when taking into consideration, the resulting standard deviations of marginal errors must be cautiously considered when taking a final decision in clinical endodontic treatment.展开更多
BACKGROUND Critically sized bone defects represent a significant challenge to orthopaedic surgeons worldwide.These defects generally result from severe trauma or resection of a whole large tumour.Autologous bone graft...BACKGROUND Critically sized bone defects represent a significant challenge to orthopaedic surgeons worldwide.These defects generally result from severe trauma or resection of a whole large tumour.Autologous bone grafts are the current gold standard for the reconstruction of such defects.However,due to increased patient morbidity and the need for a second operative site,other lines of treatment should be introduced.To find alternative unconventional therapies to manage such defects,bone tissue engineering using a combination of suitable bioactive factors,cells,and biocompatible scaffolds offers a promising new approach for bone regeneration.AIM To evaluate the healing capacity of platelet-rich fibrin(PRF)membranes seeded with allogeneic mesenchymal bone marrow-derived stem cells(BMSCs)on critically sized mandibular defects in a rat model.METHODS Sixty-three Sprague Dawley rats were subjected to bilateral bone defects of critical size in the mandibles created by a 5-mm diameter trephine bur.Rats were allocated to three equal groups of 21 rats each.Group I bone defects were irrigated with normal saline and designed as negative controls.Defects of group II were grafted with PRF membranes and served as positive controls,while defects of group III were grafted with PRF membranes seeded with allogeneic BMSCs.Seven rats from each group were killed at 1,2 and 4 wk.The mandibles were dissected and prepared for routine haematoxylin and eosin(HE)staining,Masson's trichrome staining and CD68 immunohistochemical staining.RESULTS Four weeks postoperatively,the percentage area of newly formed bone was significantly higher in group III(0.88±0.02)than in groups I(0.02±0.00)and II(0.60±0.02).The amount of granulation tissue formation was lower in group III(0.12±0.02)than in groups I(0.20±0.02)and II(0.40±0.02).The number of inflammatory cells was lower in group III(0.29±0.03)than in groups I(4.82±0.08)and II(3.09±0.07).CONCLUSION Bone regenerative quality of critically sized mandibular bone defects in rats was better promoted by PRF membranes seeded with BMSCs than with PRF membranes alone.展开更多
New Zealand (NZ) young rabbits with the administration of insulin-like growth factor (IGF-1) and transforming growth factor-β (TGF-β) with and without mandibular anterior repositioning appliances are explored for th...New Zealand (NZ) young rabbits with the administration of insulin-like growth factor (IGF-1) and transforming growth factor-β (TGF-β) with and without mandibular anterior repositioning appliances are explored for the growth of the mandibular condylar cartilage (MCC). 32 growing NZ and rabbits were divided into 4 groups: the group with saline injection in TMJ, the group which received growth factor injection in TMJ, the group which received anterior positioning appliance and the group which received growth factors injection as well as mandibular repositioning appliance. Gene expression was studied by real-time RT-PCR and cartilage growth by histomorphometry. Administration of growth factors along with mandibular repositioning appliances has induced 1) 1.70-fold expression of Col-2Agene (p value < 0.0005) and 2) 1.47-fold expression of Col-10Agene (p value < 0.0005). In contrast, administration of only mandibular repositioning appliances induced 1) 1.28-fold expression of Col-2Agene (p value < 0.0005) and 2) merely 0.62-fold expression of Col-10Agene (p value < 0.0005), while administration of growth factors only induced 1) mere 0.56-fold expression of Col-2Agene (p value 10A gene (p value growth factors along with mandibular repositioning appliances causes an increase in genetic expressions which have been corroborated by histomorphometry and validated by statistical analysis, during an accelerated growth of mandibular condylar cartilage. Administration of growth factors in the TMJ could provide a synergistic role along with mandibular repositioning appliances for treatment of mandibular retrognathism as well as disorders on the MCC.展开更多
Mandibular defects caused by injuries,tumors,and infections are common and can severely affect mandibular function and the patient's appearance.However,mandible reconstruction with a mandibular bionic structure re...Mandibular defects caused by injuries,tumors,and infections are common and can severely affect mandibular function and the patient's appearance.However,mandible reconstruction with a mandibular bionic structure remains challenging.Inspired by the process of intramembranous ossification in mandibular development,a hierarchical vascularized engineered bone consisting of angiogenesis and osteogenesis modules has been produced.Moreover,the hierarchical vascular network and bone structure generated by these hierarchical vascularized engineered bone modules match the particular anatomical structure of the mandible.The ultra-tough polyion complex has been used as the basic scaffold for hierarchical vascularized engineered bone for ensuring better reconstruction of mandible function.According to the results of in vivo experiments,the bone regenerated using hierarchical vascularized engineered bone is similar to the natural mandibular bone in terms of morphology and genomics.The sonic hedgehog signaling pathway is specifically activated in hierarchical vascularized engineered bone,indicating that the new bone in hierarchical vascularized engineered bone underwent a process of intramembranous ossification identical to that of mandible development.Thus,hierarchical vascularized engineered bone has a high potential for clinical application in mandibular defect reconstruction.Moreover,the concept based on developmental processes and bionic structures provides an effective strategy for tissue regeneration.展开更多
Objective To evaluate the incidence of two-rooted mandibular premolar morphology using full-mouth periapical film series in a Chinese population,with particular emphasis on bilateral incidence,so as to provide a clini...Objective To evaluate the incidence of two-rooted mandibular premolar morphology using full-mouth periapical film series in a Chinese population,with particular emphasis on bilateral incidence,so as to provide a clinical anatomical basis for root canal treatment in mandibular premolars.Methods A total of 2015 patients who underwent dental treatment and had full mouth periapical radiographs at the Peking University School of Stomatology from April 2011 to April 2012 were enrolled in this study.Three experienced dentists reviewed the patients' periapical films and classified the root morphology of mandibular premolars bilaterally.The incidence of unilateral and bilateral double roots were recorded and calculated,including confirmed and suspected bucco-lingual root types.Results In terms of the morphology of two-rooted mandibular first premolars,of the 2015 cases with complete root formation,two-rooted first premolars were detected in 120 cases,with a total number of 159 teeth.According to the number of teeth,the overall incidence of double roots was 4.03%(159/3972).In terms of the morphology of two-rooted mandibular second premolars,of the 2015 cases with complete root formation,two-rooted second premolars were detected in 24 cases,with a total number of 33 teeth.According to the number of teeth,the overall incidence of double roots was 0.85%(33/3880).Conclusions The roots of mandibular premolars display specific morphological patterns.Based on a large sample,we observed and calculated not only the occurrence rate of bucco-lingual and mesio-distal double roots in first and second mandibular premolars,but also the incidence of unilateral or bilateral double roots within the same mandible.These findings could provide useful information on the anatomical structure of mandibular premolars for endodontic,prosthodontic and surgical procedures,and could improve the quality of treatment and reduce complications.展开更多
AIM: To gather existing radiographic classifications of mandibular canals branching, considering the criteria on which these were based.METHODS: The search for studies on mandibular canals based on imaging exams inclu...AIM: To gather existing radiographic classifications of mandibular canals branching, considering the criteria on which these were based.METHODS: The search for studies on mandibular canals based on imaging exams included literature reviews, epidemiological studies of prevalence, descriptive studies, or case reports. An electronic search in the MEDLINE(Ovid SP), Pub Med, EMBASE(Ovid SP), Web of Science(Thompson Reuters), and Scopus(Elsevier) databases was performed, as well as a manual evaluation of the references of the selected articles. Combinations of key words were placed in each database. No restrictions were imposed regarding the year of publication or language. References collected in duplicate were removed by the authors. A table was drawn up, containing the included studies and respective interest data.RESULTS: Six classifications of mandibular canals branching were selected for the present literature review. Four were based on two-dimensional radiographic exams, and two were performed based on threedimensional tomographic exams. Three-dimensional classifications were determined based on the analysis found in the least number of exams, comparatively to two-dimensional studies. The prevalence of mandibular canal branching varied from 0% to 38.75% in the works based on two-dimensional exams, while those found inthree-dimensional exams ranged from 15.6% to 65%. The studies were mostly referred to branches that began in the mandibular ramus. Just one classification considered the branches that began in the mandibular body region.CONCLUSION: Three-dimensional exams appear to be the best method to view mandibular canal branching. Further studies are warranted to determine its true prevalence and questions concerning to associations.展开更多
BACKGROUND Congenital maxillomandibular syngnathia is an extremely rare disorder characterized by craniofacial malformations and inability to open the mouth adequately, which leads to problems with feeding, swallowing...BACKGROUND Congenital maxillomandibular syngnathia is an extremely rare disorder characterized by craniofacial malformations and inability to open the mouth adequately, which leads to problems with feeding, swallowing, and breathing as well as temporomandibular joint ankylosis. The main goal of the surgery is to release the ankylosis, establish functioning mandible, and prevent re-fusion.However, surgical procedures for this disease are rarely reported.CASE SUMMARY Here, we report a 7-mo-old girl with bilateral maxillomandibular syngnathia. The patient presented with difficulty in feeding, breathing, sounding, and swallowing and had developmental dysplasia. For treatment, we performed bone isolation by computer-assisted navigation and used silicone to fix the wound surface to prevent refusion of bone. To our knowledge, this is the only syngnathia case in the literature treated using computer-assisted navigation. With the guidance of precise navigation, we were able to minimize operation time by at least one hour,the patient's blood vessels, nerves, and tooth germs were well protected, and excessive bleeding was avoided. After six weeks, the patient showed improvement in mouth opening and no major issues of feeding.CONCLUSION Application of computer-assisted navigation can significantly improve accuracy,effectiveness, and surgical safety in correcting congenital maxillomandibular syngnathia.展开更多
Introduction Mandibular segmental defects result in significant cosmetic and functional deficiencies.Meanwhile,the reconstruction of both the contour and function of the mandible is a challenging task.At present,autol...Introduction Mandibular segmental defects result in significant cosmetic and functional deficiencies.Meanwhile,the reconstruction of both the contour and function of the mandible is a challenging task.At present,autologous vascularized fibula transplantation is the most common method to reconstruct a mandible with long-span defects[1].展开更多
[Objectives] To shorten the time of removal of the bone embedded mandibular third molar,reduce the complications of tooth extraction,and explore a surgery method of resistance-free removal of the mandibular third mola...[Objectives] To shorten the time of removal of the bone embedded mandibular third molar,reduce the complications of tooth extraction,and explore a surgery method of resistance-free removal of the mandibular third molar. [Methods] A total of 50 patients with bone embedded mandibular third molar needing to be removed were selected. A 45° elevation turbine and a long tungsten steel drill were used to remove the mesial,buccal,and distal resistances. When necessary,tongue side and root resistance was removed,and the third molar was removed when there was basically no resistance around it. The removal time was recorded,followed up for 10 d,and the postoperative reaction was observed. [Results] The bone embedded mandibular third molars were removed for all patients within 15 min,and there was no serious postoperative reaction,all patients showed high satisfaction. [Conclusions]The method of resistance-free removal of the bone embedded mandibular third molar can significantly shorten the removal time,reduce the fear of patients,and ease pain of patients.展开更多
Background: Resection of the mandible can lead to bony defect which has a direct bearing on the quality of life of the patient. Reconstruction of such defect is necessary to restore aesthetics but optimal functioning ...Background: Resection of the mandible can lead to bony defect which has a direct bearing on the quality of life of the patient. Reconstruction of such defect is necessary to restore aesthetics but optimal functioning of the oral cavity can only be achieved with prosthodontic rehabilitation. We, hereby, report the impact of oral rehabilitation on patients’ satisfaction and quality of life after mandibular reconstruction in our institution. Materials and Method: Patients who had oral rehabilitation following mandibular reconstruction from January 2010 to December 2015 were included. Patients’ oral health related quality of life [OHRQL] before and after rehabilitation was evaluated using the head and neck module of the European Organization for Research and Treatment of Cancer [EORTC]. Oral functions and denture satisfaction were also evaluated with Visual Analogue Scale [VAS]. Data obtained were analyzed with SPSS version 20 and level of significance was set at p Result: Of the 43 patients who had mandibular reconstruction during the study period, only 21 [48.8%] had dental rehabilitation. Twelve patients [57.1%] had conventional acrylic denture, 5 had fixed denture [bridge] while 4 patients had rehabilitation with dental implants. The mean follow-up period after rehabilitation was 8.42 months [Range: 6 - 22 months]. Although, OHRQL analysis revealed an improvement following rehabilitation, only the social aspect of the evaluation was statistically significant [p p = 0.00]. On the contrary, there was no statistically significant difference in aesthetics amongst the patients regardless of type of rehabilitation [p = 0.26]. Conclusion: Findings from this study showed that there is improvement in OHRQL following dental rehabilitation. Also, Patients who were rehabilitated with dental implant had better oral function than those with fixed or conventional denture.展开更多
Mandibular advancement devices(MADs)are one of the treatments used for Obstructive sleep apnea(OSA).MADs try to maintain the mandible in an advanced position to keep the upper airways open when sleeping.To achieve thi...Mandibular advancement devices(MADs)are one of the treatments used for Obstructive sleep apnea(OSA).MADs try to maintain the mandible in an advanced position to keep the upper airways open when sleeping.To achieve this goal,most current MADs limit the mouth opening to a few millimetres.The study of the kinematic behaviour of the patient’s jaw is essential in order to design devices that allow greater aperture ranges.For this purpose,a 3D multibody model that reproduces jaw movement has been developed in this work.To this end,the movement of the lower incisor has been determined by means of a vision system and reflective markers.In addition,the kinematics of the temporomandibular joint has been modelled.Next,the device is designed and printed using a cam-follower mechanism.This way,the cam profiles and the followers are optimally designed and positioned for each patient depending on the physiognomy of the jaw and the opening and advancing movement prescribed by the specialist.展开更多
BACKGROUND Adult patients presenting with Angle Class II division 1 malocclusions that have a strong skeletal etiology can be challenging for clinicians,particularly if accompanied by retrognathia of the mandible and ...BACKGROUND Adult patients presenting with Angle Class II division 1 malocclusions that have a strong skeletal etiology can be challenging for clinicians,particularly if accompanied by retrognathia of the mandible and a dolichofacial growth pattern.CASE SUMMARY In this case report,we describe the successful orthodontic and surgical management of a 20-year-old woman with an Angle Class II malocclusion with a severe anteroposterior skeletal discrepancy characterized by mandibular deficiency.She had incompetent lips,dental and skeletal Class II malocclusion,high mandibular plane angle,mild mandibular crowding,and two missing maxillary first molars.The treatment plan comprised:(1)Extraction of two mandibular second premolars to decompensate and retract mandibular incisors;(2)pre-surgical alignment,leveling,and space closure of the teeth in both arches,and protraction of the second maxillary molars to close the maxillary space;(3)surgical treatment including a LeFort I osteotomy for maxillary retraction and rotation,a bilateral sagittal split osteotomy for mandibular advancement and rotation,and a genioplasty for correctting the skeletal deformities;and(4)post-surgical correction of the malocclusion.CONCLUSION The patient’s facial esthetics was significantly improved and a desirable occlusion was achieved after 16 mo treatment.Follow-up records after 2 years showed stable esthetics and function.展开更多
Background: The surgical removal of impacted mandibular molars represents one of the most prevalent procedures carried out by the oral and maxillofacial surgeon. Despite its prevalence, unusual impaction location of m...Background: The surgical removal of impacted mandibular molars represents one of the most prevalent procedures carried out by the oral and maxillofacial surgeon. Despite its prevalence, unusual impaction location of mandibular molars necessitates alternative extraction approaches. One of the methods described for extraction of deeply impacted molars is the bony lid approach which was first presented for surgical endodontic treatment of mandibular molars. The aim of this study was to evaluate the outcome of the bony lid approach in extracting mandibular molars. In addition, critical clinical key points, new aspects while performing this procedure, indications and contraindications are discussed. Materials and Methods: 9 patients were treated with the bony lid technique. A retrospective analysis of medical charts was conducted to evaluate the results of surgery. Results: The operative technique described in the article was successfully carried out in 12 cases of impacted mandibular molars. No incidence of permanent sensory deficit was recorded. In one patient, an infection mandated the removal of the bony lids. In all other cases the healing process was uneventful. Conclusion: The bony lid technique has many advantages over alternative extraction methods and should be considered as a treatment option in cases of critical proximity between an impacted tooth and the inferior alveolar nerve.展开更多
基金Natural Science Foundation of Jiangsu Province, No. SBK2021021787the Major Project of the Health Commission ofJiangsu Province, No. ZD2022025and the Key Project of the Nanjing Health Commission, No. ZKX20048.
文摘BACKGROUND The relation between orthodontic treatment and temporomandibular disorders(TMDs)is under debate;the management of TMD during orthodontic treatment has always been a challenge.If TMD symptoms occur during orthodontic treatment,an immediate pause of orthodontic adjustments is recommended;the treatment can resume when the symptoms are managed and stabilized.CASE SUMMARY This case report presents a patient(26-year-old,female)with angle class I,skeletal class II and TMDs.The treatment was a hybrid of clear aligners,fixed appliances and temporary anchorage devices(TADs).After 3 mo resting and treatment on her TMD,the patient’s TMD symptom alleviated,but her anterior occlusion displayed deep overbite.Therefore,the fixed appliances with TAD were used to correct the anterior deep-bite and level maxillary and mandibular deep curves.After the levelling,the patient showed dual bite with centric relation and maximum intercuspation discrepancy on her occlusion.After careful examination of temporomandibular joints(TMJ)position,the stable bite splint and Invisible Mandibular Advancement appliance were used to reconstruct her occlusion.Eventually,the improved facial appearance and relatively stable occlusion were achieved.The 1-year follow-up records showed there was no obvious change in TMJ morphology,and her occlusion was stable.CONCLUSION TMD screening and monitoring is of great clinical importance in the TMD susceptible patients.Hybrid treatment with clear aligners and fixed appliances and TADs is an effective treatment modality for the complex cases.
基金This study was reviewed and approved by the Medical Ethics Committee of The Affiliated Hospital of Qingdao University(authorisation number:QYFYWZLL26729).
文摘BACKGROUND Mandibular retraction is the main etiological mechanism of class II malocclusion in China and the subsequent distal molar relationship can cause functional discomfort in mastication,breathing and the temporomandibular joint.The use of mandibular advancement(MA)devices has recently emerged as an adolescent mandibular retraction treatment;however,current studies regarding the effect thereof are relatively few,and there is lack of sufficient clinical support.AIM To investigate the clinical effect of invisalign MA on the treatment of mandibular retraction in adolescents.METHODS This study included 30 adolescent patients who underwent treatment with the MA appliances from December 2017 to June 2021.The lateral cephalometric data before and after treatment were collected and imported into Dolphin Imaging software.The changes were measured by linear measurement superimposed with lateral cephalometric trajectory based on the Pancherz technology.RESULTS There was no significant difference in the length and position of maxilla before and after the treatment.The position of the mandible moved 3.13 mm,the length increased 4.14 mm,the mandibular ramus length increased 4.09 mm,the body length increased 4.25 mm,and the position of the condyle moved 1.03 mm forward after treatment.Additionally,changes in the incisor sagittal position and labial inclination were observed.The position of the upper incisor point moved back 1.33 mm,without statistical difference,the inclination and tooth angle decreased by 3.44°and 4.06°,respectively;the position of the lower incisor point was moved 2.98 mm,and the inclination and tooth angle increased by 2.62°and 1.23°,respectively.Furthermore,changes in the incisor overjet and molar relationship were seen.Overjet decreased by 4.31 mm,of which 1.78 mm was due to dental factors,accounting for 41.3%of the effect as opposed to 58.7%due to skeletal factors.Molar relationship improved 3.87 mm,with 1.34 mm due to dental factors,and dental and skeletal factors were accounted for 34.6%and 65.4%of the effect,respectively.CONCLUSION For adolescent patients with mandible retraction,invisalign MA can effectively promote the mandible growth,and it was proven to be mainly due to skeletal effects.
文摘BACKGROUND: To evaluate the diagnostic accuracy of clinical signs combined with the tongue blade test(TBT) to detect maxillary and mandibular fractures.METHODS: A cross-sectional study enrolled patients with maxillary and mandibular injuries in the emergency department. Physical examination and the TBT were performed, followed by radiological imaging(facial X-ray or computed tomography [CT]). The diagnostic accuracy was calculated for individuals and a combination of clinical findings at predicting maxillary and mandibular fractures.RESULTS: A total of 98 patients were identified, of whom 31.6% had maxillary fractures and9.2% had mandibular fractures. The combination of malocclusion, tenderness on palpation and swelling with positive TBT had 100% specificity to detect maxillary and mandibular fractures. In the absence of malocclusion, the combination of tenderness on palpation and swelling with positive TBT produced a specificity of 97.8% for maxillary fracture and a specificity of 96.2% for mandibular fracture. A clinical decision tool consisting of malocclusion, tenderness on palpation, swelling and TBT revealed a specificity of 100% and a positive predictive value of 100%.CONCLUSION: The clinical decision tool is potentially useful to rule out mandibular fractures,thus preventing unnecessary radiation exposure.
文摘Middle-mesial canals in mandibular molars are present in the population depending on age, sex and ethnicity. However, limited literature alludes to its prevalence. Troughing procedures may enhance identification, cleaning and shaping. This case report expresses the recognition and management of middle-mesial canal in a mandibular second molar of 24 years old Hispanic-Latino male.
基金supported by the National Natural Science Foundation of China(U1904145)the Joint Funds for the Innovation of Science and Technology of Fujian province(2019Y9128).
文摘Background:This study aims to predict the extraction difficulty of mandibular third molars based on panoramic images using transfer learning while employing super-resolution(SR)technology to enhance the feasibility and validity of the prediction.Methods:We reviewed a total of 608 preoperative mandibular third molar panoramic radiographs from two medical facilities:the First Affiliated Hospital of Zhengzhou University(n=509;456 in the training set and 53 in the test set)and the Henan Provincial Dental Hospital(n=99 in the validation set).We conducted a deep-transfer learning network on high-resolution(HR)panoramic radiographs to improve the longitudinal resolution of the images and obtained the SR images.Subsequently,we constructed models named Model-HR and Model-SR using high-dimensional quantitative features extracted through the Least Absolute Shrinkage and Selection Operator method.The models’performances were evaluated using the receiver operating characteristic curve(ROC).To assess the reliability of the model,we compared the results from the test set with those of three dentists.Results:Model-SR outperformed Model-HR(area under the curve(AUC):0.779,sensitivity:85.5%,specificity:60.9%,and accuracy:79.8%vs.AUC:0.753,sensitivity:73.7%,specificity:73.9%,and accuracy:73.7%)in predicting the difficulty of extracting mandibular third molars.Both Model-HR(AUC=0.821,95%CI 0.687–0.956)and Model-SR(AUC=0.963,95%CI 0.921–0.999)demonstrated superior performance compared to expert dentists(highest AUC=0.799,95%CI 0.671–0.927).Conclusions:Model-SR yielded superior predictive performance in determining the difficulty of extracting mandibular third molars when compared with Model-HR and expert dentists’visual assessments.
文摘In the evaluation of the beauty and functional integrity of the lower face, the oral cavity, teeth, mandible, maxilla, and the size and position of the tongue are important. The tongue locates forward and is larger than normal in prognathism, in which the jaw protrudes from the skull. It is not clear whether an enlarged tongue causes the open bite, protrusion or dental arch misalignment, or is a result of them. Here, we report two patients with mandibular prognathism and relative macroglossia, which were treated by mandibular setback surgery using a bilateral sagittal split osteotomy (BSSO) and excision of the tongue. This procedure achieved aesthetic improvement of the face and dentition.
基金the National Natural Science Foundation of China(NSFC 81722014,81970913)State Key Laboratory of Oral Diseases(SKLOD202008)West China Hospital of Stomatology(RD-03-202010).
文摘Alveolar bone is the thickened ridge of jaw bone that supports teeth.It is subject to constant occlusal force and pathogens invasion,and is therefore under active bone remodeling and immunomodulation.Alveolar bone holds a distinct niche from long bone considering their different developmental origin and postnatal remodeling pattern.However,a systematic explanation of alveolar bone at single-cell level is still lacking.Here,we construct a single-cell atlas of mouse mandibular alveolar bone through single-cell RNA sequencing(scRNA-seq).A more active immune microenvironment is identified in alveolar bone,with a higher proportion of mature immune cells than in long bone.Among all immune cell populations,the monocyte/macrophage subpopulation most actively interacts with mesenchymal stem cells(MSCs)subpopulation.Alveolar bone monocytes/macrophages express a higher level of Oncostatin M(Osm)compared to long bone,which promotes osteogenic differentiation and inhibits adipogenic differentiation of MSCs.In summary,our study reveals a unique immune microenvironment of alveolar bone,which may provide a more precise immune-modulatory target for therapeutic treatment of oral diseases.
文摘The aim of this study was to investigate the physiological foramen diameter, shape and distance between physiological and anatomical apex of maxillary and mandibular first and second molars. Accurate knowledge of the physiological foramina morphology; thus, inherent mechanical shaping technical hindrances, is decisive when taking the corresponding root canal final preparation decision. The morphological dimensions of a total of 1 727 physiological foramina were investigated by means of micro-computed tomography. Mean narrow and wide(to a high number, oval) diameters of the physiological foramen were 0.24,0.22 and 0.33 mm and 0.33, 0.31 and 0.42 mm in mesiobuccal(MB), distobuccal(DB) and palatal(P) roots in maxillary first molars; 0.24, 0.22 and 0.33 mm and 0.41, 0.33 and 0.44 in MB, DB, and P roots in maxillary second molars. Mandibular first molars showed mean narrow and wide diameters of 0.24 and 0.30 mm and of 0.39 and 0.46 mm in mesial(M) and distal(D)roots; second mandibular molars showed 0.25 and 0.31 mm and 0.47 mm in M and D roots. The mean distance between the physiological foramina and anatomical apex was 0.82, 0.81 and 1.02 mm and 0.54, 0.43 and 0.63 mm in MB, DB and P roots of the maxillary first and second molars, respectively. A mean distance of 0.95 mm(M) and 1.05 mm(D) in the first and0.78 mm(M) and 0.81 mm(D) in the second mandibular molars was observed. Based on the results obtained, assumable recommendations for final preparation size of the physiological foramen were calculated. However, when taking into consideration, the resulting standard deviations of marginal errors must be cautiously considered when taking a final decision in clinical endodontic treatment.
文摘BACKGROUND Critically sized bone defects represent a significant challenge to orthopaedic surgeons worldwide.These defects generally result from severe trauma or resection of a whole large tumour.Autologous bone grafts are the current gold standard for the reconstruction of such defects.However,due to increased patient morbidity and the need for a second operative site,other lines of treatment should be introduced.To find alternative unconventional therapies to manage such defects,bone tissue engineering using a combination of suitable bioactive factors,cells,and biocompatible scaffolds offers a promising new approach for bone regeneration.AIM To evaluate the healing capacity of platelet-rich fibrin(PRF)membranes seeded with allogeneic mesenchymal bone marrow-derived stem cells(BMSCs)on critically sized mandibular defects in a rat model.METHODS Sixty-three Sprague Dawley rats were subjected to bilateral bone defects of critical size in the mandibles created by a 5-mm diameter trephine bur.Rats were allocated to three equal groups of 21 rats each.Group I bone defects were irrigated with normal saline and designed as negative controls.Defects of group II were grafted with PRF membranes and served as positive controls,while defects of group III were grafted with PRF membranes seeded with allogeneic BMSCs.Seven rats from each group were killed at 1,2 and 4 wk.The mandibles were dissected and prepared for routine haematoxylin and eosin(HE)staining,Masson's trichrome staining and CD68 immunohistochemical staining.RESULTS Four weeks postoperatively,the percentage area of newly formed bone was significantly higher in group III(0.88±0.02)than in groups I(0.02±0.00)and II(0.60±0.02).The amount of granulation tissue formation was lower in group III(0.12±0.02)than in groups I(0.20±0.02)and II(0.40±0.02).The number of inflammatory cells was lower in group III(0.29±0.03)than in groups I(4.82±0.08)and II(3.09±0.07).CONCLUSION Bone regenerative quality of critically sized mandibular bone defects in rats was better promoted by PRF membranes seeded with BMSCs than with PRF membranes alone.
文摘New Zealand (NZ) young rabbits with the administration of insulin-like growth factor (IGF-1) and transforming growth factor-β (TGF-β) with and without mandibular anterior repositioning appliances are explored for the growth of the mandibular condylar cartilage (MCC). 32 growing NZ and rabbits were divided into 4 groups: the group with saline injection in TMJ, the group which received growth factor injection in TMJ, the group which received anterior positioning appliance and the group which received growth factors injection as well as mandibular repositioning appliance. Gene expression was studied by real-time RT-PCR and cartilage growth by histomorphometry. Administration of growth factors along with mandibular repositioning appliances has induced 1) 1.70-fold expression of Col-2Agene (p value < 0.0005) and 2) 1.47-fold expression of Col-10Agene (p value < 0.0005). In contrast, administration of only mandibular repositioning appliances induced 1) 1.28-fold expression of Col-2Agene (p value < 0.0005) and 2) merely 0.62-fold expression of Col-10Agene (p value < 0.0005), while administration of growth factors only induced 1) mere 0.56-fold expression of Col-2Agene (p value 10A gene (p value growth factors along with mandibular repositioning appliances causes an increase in genetic expressions which have been corroborated by histomorphometry and validated by statistical analysis, during an accelerated growth of mandibular condylar cartilage. Administration of growth factors in the TMJ could provide a synergistic role along with mandibular repositioning appliances for treatment of mandibular retrognathism as well as disorders on the MCC.
基金National Key Research and Development Program of China(2018YFA0703000)National Natural Science Foundation of China(8212200044,52075482,82071085,81873720)+2 种基金Zhejiang Provincial Natural Science Foundation of China(LR21H140001)Key Research and Development Program of Zhejiang,China(2017C01054,2018C03062)Scientific Research Fund of Zhejiang Provincial Education Department(Y202045564)。
文摘Mandibular defects caused by injuries,tumors,and infections are common and can severely affect mandibular function and the patient's appearance.However,mandible reconstruction with a mandibular bionic structure remains challenging.Inspired by the process of intramembranous ossification in mandibular development,a hierarchical vascularized engineered bone consisting of angiogenesis and osteogenesis modules has been produced.Moreover,the hierarchical vascular network and bone structure generated by these hierarchical vascularized engineered bone modules match the particular anatomical structure of the mandible.The ultra-tough polyion complex has been used as the basic scaffold for hierarchical vascularized engineered bone for ensuring better reconstruction of mandible function.According to the results of in vivo experiments,the bone regenerated using hierarchical vascularized engineered bone is similar to the natural mandibular bone in terms of morphology and genomics.The sonic hedgehog signaling pathway is specifically activated in hierarchical vascularized engineered bone,indicating that the new bone in hierarchical vascularized engineered bone underwent a process of intramembranous ossification identical to that of mandible development.Thus,hierarchical vascularized engineered bone has a high potential for clinical application in mandibular defect reconstruction.Moreover,the concept based on developmental processes and bionic structures provides an effective strategy for tissue regeneration.
文摘Objective To evaluate the incidence of two-rooted mandibular premolar morphology using full-mouth periapical film series in a Chinese population,with particular emphasis on bilateral incidence,so as to provide a clinical anatomical basis for root canal treatment in mandibular premolars.Methods A total of 2015 patients who underwent dental treatment and had full mouth periapical radiographs at the Peking University School of Stomatology from April 2011 to April 2012 were enrolled in this study.Three experienced dentists reviewed the patients' periapical films and classified the root morphology of mandibular premolars bilaterally.The incidence of unilateral and bilateral double roots were recorded and calculated,including confirmed and suspected bucco-lingual root types.Results In terms of the morphology of two-rooted mandibular first premolars,of the 2015 cases with complete root formation,two-rooted first premolars were detected in 120 cases,with a total number of 159 teeth.According to the number of teeth,the overall incidence of double roots was 4.03%(159/3972).In terms of the morphology of two-rooted mandibular second premolars,of the 2015 cases with complete root formation,two-rooted second premolars were detected in 24 cases,with a total number of 33 teeth.According to the number of teeth,the overall incidence of double roots was 0.85%(33/3880).Conclusions The roots of mandibular premolars display specific morphological patterns.Based on a large sample,we observed and calculated not only the occurrence rate of bucco-lingual and mesio-distal double roots in first and second mandibular premolars,but also the incidence of unilateral or bilateral double roots within the same mandible.These findings could provide useful information on the anatomical structure of mandibular premolars for endodontic,prosthodontic and surgical procedures,and could improve the quality of treatment and reduce complications.
文摘AIM: To gather existing radiographic classifications of mandibular canals branching, considering the criteria on which these were based.METHODS: The search for studies on mandibular canals based on imaging exams included literature reviews, epidemiological studies of prevalence, descriptive studies, or case reports. An electronic search in the MEDLINE(Ovid SP), Pub Med, EMBASE(Ovid SP), Web of Science(Thompson Reuters), and Scopus(Elsevier) databases was performed, as well as a manual evaluation of the references of the selected articles. Combinations of key words were placed in each database. No restrictions were imposed regarding the year of publication or language. References collected in duplicate were removed by the authors. A table was drawn up, containing the included studies and respective interest data.RESULTS: Six classifications of mandibular canals branching were selected for the present literature review. Four were based on two-dimensional radiographic exams, and two were performed based on threedimensional tomographic exams. Three-dimensional classifications were determined based on the analysis found in the least number of exams, comparatively to two-dimensional studies. The prevalence of mandibular canal branching varied from 0% to 38.75% in the works based on two-dimensional exams, while those found inthree-dimensional exams ranged from 15.6% to 65%. The studies were mostly referred to branches that began in the mandibular ramus. Just one classification considered the branches that began in the mandibular body region.CONCLUSION: Three-dimensional exams appear to be the best method to view mandibular canal branching. Further studies are warranted to determine its true prevalence and questions concerning to associations.
基金Supported by Ninth People's Hospital affiliated to Shanghai Jiao Tong University,School of Medicine "Multi-Disciplinary Team" Clinical Research Project,No.201701011
文摘BACKGROUND Congenital maxillomandibular syngnathia is an extremely rare disorder characterized by craniofacial malformations and inability to open the mouth adequately, which leads to problems with feeding, swallowing, and breathing as well as temporomandibular joint ankylosis. The main goal of the surgery is to release the ankylosis, establish functioning mandible, and prevent re-fusion.However, surgical procedures for this disease are rarely reported.CASE SUMMARY Here, we report a 7-mo-old girl with bilateral maxillomandibular syngnathia. The patient presented with difficulty in feeding, breathing, sounding, and swallowing and had developmental dysplasia. For treatment, we performed bone isolation by computer-assisted navigation and used silicone to fix the wound surface to prevent refusion of bone. To our knowledge, this is the only syngnathia case in the literature treated using computer-assisted navigation. With the guidance of precise navigation, we were able to minimize operation time by at least one hour,the patient's blood vessels, nerves, and tooth germs were well protected, and excessive bleeding was avoided. After six weeks, the patient showed improvement in mouth opening and no major issues of feeding.CONCLUSION Application of computer-assisted navigation can significantly improve accuracy,effectiveness, and surgical safety in correcting congenital maxillomandibular syngnathia.
基金supported in part by grants from the Clinical Research for Crossing Item of Shandong University(No.2020SDUCRCB001)the Shandong Provincial Natural Science Foundation(No.ZR2020MH180)+1 种基金the Rongxiang Regeneration Medicine Fund of Shandong University(No.2019SDRX-11)the Science and Technology Development Plan of Jinan City(No.201805041)。
文摘Introduction Mandibular segmental defects result in significant cosmetic and functional deficiencies.Meanwhile,the reconstruction of both the contour and function of the mandible is a challenging task.At present,autologous vascularized fibula transplantation is the most common method to reconstruct a mandible with long-span defects[1].
基金Supported by the People's Livelihood Science and Technology Program of Qingdao City(15-9-2-73-nsh)
文摘[Objectives] To shorten the time of removal of the bone embedded mandibular third molar,reduce the complications of tooth extraction,and explore a surgery method of resistance-free removal of the mandibular third molar. [Methods] A total of 50 patients with bone embedded mandibular third molar needing to be removed were selected. A 45° elevation turbine and a long tungsten steel drill were used to remove the mesial,buccal,and distal resistances. When necessary,tongue side and root resistance was removed,and the third molar was removed when there was basically no resistance around it. The removal time was recorded,followed up for 10 d,and the postoperative reaction was observed. [Results] The bone embedded mandibular third molars were removed for all patients within 15 min,and there was no serious postoperative reaction,all patients showed high satisfaction. [Conclusions]The method of resistance-free removal of the bone embedded mandibular third molar can significantly shorten the removal time,reduce the fear of patients,and ease pain of patients.
文摘Background: Resection of the mandible can lead to bony defect which has a direct bearing on the quality of life of the patient. Reconstruction of such defect is necessary to restore aesthetics but optimal functioning of the oral cavity can only be achieved with prosthodontic rehabilitation. We, hereby, report the impact of oral rehabilitation on patients’ satisfaction and quality of life after mandibular reconstruction in our institution. Materials and Method: Patients who had oral rehabilitation following mandibular reconstruction from January 2010 to December 2015 were included. Patients’ oral health related quality of life [OHRQL] before and after rehabilitation was evaluated using the head and neck module of the European Organization for Research and Treatment of Cancer [EORTC]. Oral functions and denture satisfaction were also evaluated with Visual Analogue Scale [VAS]. Data obtained were analyzed with SPSS version 20 and level of significance was set at p Result: Of the 43 patients who had mandibular reconstruction during the study period, only 21 [48.8%] had dental rehabilitation. Twelve patients [57.1%] had conventional acrylic denture, 5 had fixed denture [bridge] while 4 patients had rehabilitation with dental implants. The mean follow-up period after rehabilitation was 8.42 months [Range: 6 - 22 months]. Although, OHRQL analysis revealed an improvement following rehabilitation, only the social aspect of the evaluation was statistically significant [p p = 0.00]. On the contrary, there was no statistically significant difference in aesthetics amongst the patients regardless of type of rehabilitation [p = 0.26]. Conclusion: Findings from this study showed that there is improvement in OHRQL following dental rehabilitation. Also, Patients who were rehabilitated with dental implant had better oral function than those with fixed or conventional denture.
基金A substantial part of the work described in this article was supported by the research Contracts 806/31.4830 and 806/31.5511 between the private company Laboratorio Ortoplus S.L.and the University of Málaga,which is acknowledgedwith gratefulness.
文摘Mandibular advancement devices(MADs)are one of the treatments used for Obstructive sleep apnea(OSA).MADs try to maintain the mandible in an advanced position to keep the upper airways open when sleeping.To achieve this goal,most current MADs limit the mouth opening to a few millimetres.The study of the kinematic behaviour of the patient’s jaw is essential in order to design devices that allow greater aperture ranges.For this purpose,a 3D multibody model that reproduces jaw movement has been developed in this work.To this end,the movement of the lower incisor has been determined by means of a vision system and reflective markers.In addition,the kinematics of the temporomandibular joint has been modelled.Next,the device is designed and printed using a cam-follower mechanism.This way,the cam profiles and the followers are optimally designed and positioned for each patient depending on the physiognomy of the jaw and the opening and advancing movement prescribed by the specialist.
基金Supported by the Natural Science Foundation of Jiangsu,No. SBK2021021787Nanjing Key Project Foundation,No. ZKX20048
文摘BACKGROUND Adult patients presenting with Angle Class II division 1 malocclusions that have a strong skeletal etiology can be challenging for clinicians,particularly if accompanied by retrognathia of the mandible and a dolichofacial growth pattern.CASE SUMMARY In this case report,we describe the successful orthodontic and surgical management of a 20-year-old woman with an Angle Class II malocclusion with a severe anteroposterior skeletal discrepancy characterized by mandibular deficiency.She had incompetent lips,dental and skeletal Class II malocclusion,high mandibular plane angle,mild mandibular crowding,and two missing maxillary first molars.The treatment plan comprised:(1)Extraction of two mandibular second premolars to decompensate and retract mandibular incisors;(2)pre-surgical alignment,leveling,and space closure of the teeth in both arches,and protraction of the second maxillary molars to close the maxillary space;(3)surgical treatment including a LeFort I osteotomy for maxillary retraction and rotation,a bilateral sagittal split osteotomy for mandibular advancement and rotation,and a genioplasty for correctting the skeletal deformities;and(4)post-surgical correction of the malocclusion.CONCLUSION The patient’s facial esthetics was significantly improved and a desirable occlusion was achieved after 16 mo treatment.Follow-up records after 2 years showed stable esthetics and function.
文摘Background: The surgical removal of impacted mandibular molars represents one of the most prevalent procedures carried out by the oral and maxillofacial surgeon. Despite its prevalence, unusual impaction location of mandibular molars necessitates alternative extraction approaches. One of the methods described for extraction of deeply impacted molars is the bony lid approach which was first presented for surgical endodontic treatment of mandibular molars. The aim of this study was to evaluate the outcome of the bony lid approach in extracting mandibular molars. In addition, critical clinical key points, new aspects while performing this procedure, indications and contraindications are discussed. Materials and Methods: 9 patients were treated with the bony lid technique. A retrospective analysis of medical charts was conducted to evaluate the results of surgery. Results: The operative technique described in the article was successfully carried out in 12 cases of impacted mandibular molars. No incidence of permanent sensory deficit was recorded. In one patient, an infection mandated the removal of the bony lids. In all other cases the healing process was uneventful. Conclusion: The bony lid technique has many advantages over alternative extraction methods and should be considered as a treatment option in cases of critical proximity between an impacted tooth and the inferior alveolar nerve.
