With the help of digital image processing technology, an automatic measurement method for the three-phase contact angles in the pore throats of the microfluidic model was established using the microfluidic water flood...With the help of digital image processing technology, an automatic measurement method for the three-phase contact angles in the pore throats of the microfluidic model was established using the microfluidic water flooding experiment videos as the data source. The results of the new method were verified through comparing with the manual measurement data.On this basis, the dynamic changes of the three-phase contact angles under flow conditions were clarified by the contact angles probability density curve and mean value change curve. The results show that, for water-wetting rocks, the mean value of the contact angles is acute angle during the early stage of the water flooding process, and it increases with the displacement time and becomes obtuse angle in the middle-late stage of displacement as the dominant force of oil phase gradually changes from viscous force to capillary force. The droplet flow in the remaining oil occurs in the central part of the pore throats, without three-phase contact angle. The contact angles for the porous flow and the columnar flow change slightly during the displacement and present as obtuse angles in view of mean values, which makes the remaining oil poorly movable and thus hard to be recovered. The mean value of the contact angle for the cluster flow tends to increase in the flooding process, which makes the remaining oil more difficult to be recovered. The contact angles for the membrane flow are mainly obtuse angles and reach the highest mean value in the late stage of displacement, which makes the remaining oil most difficult to be recovered. After displacement, the remaining oils under different flow regimes are just subjected to capillary force, with obtuse contact angles, and the wettability of the pore throat walls in the microfluidic model tends to be oil-wet under the action of crude oil.展开更多
To realize high-precision attitude stabilization of a flexible spacecraft in the presence of complex disturbances and measurement noises,an iterative learning disturbance observer(ILDO)is presented in this paper.First...To realize high-precision attitude stabilization of a flexible spacecraft in the presence of complex disturbances and measurement noises,an iterative learning disturbance observer(ILDO)is presented in this paper.Firstly,a dynamic model of disturbance is built by augmenting the integral of the lumped disturbance as a state.Based on it,ILDO is designed by introducing iterative learning structures.Then,comparative analyses of ILDO and traditional disturbance observers are carried out in frequency domain.It demonstrates that ILDO combines the advantages of high accuracy in disturbance estimation and favorable robustness to measurement noise.After that,an ILDO based composite controller is designed to stabilize the spacecraft attitude.Finally,the effectiveness of the proposed control scheme is verified by simulations.展开更多
Environmental radioactivity is produced by radioactive materials in the human environment. While some radioisotopes, such as strontium-90 (90Sr) and technetium-99 (99Tc), are only found on Earth as a result of human a...Environmental radioactivity is produced by radioactive materials in the human environment. While some radioisotopes, such as strontium-90 (90Sr) and technetium-99 (99Tc), are only found on Earth as a result of human activity, and some, like potassium-40 (40K), are only present due to natural processes, a few isotopes, e.g. tritium (3H), result from both natural processes and human activities. The concentration and location of some natural isotopes, particularly uranium-238 (238U), can be affected by human activity because of the constant exposure of Human beings to radiation caused by terrestrial, extra-terrestrial and anthropogenic radio nuclides, it is necessary to determine and estimate the activity of various radio nuclides in environmental media such as vegetation, soil, and water. In the present research, the activities of 226Ra, 232Th and 40K are measured in soil, vegetation and water samples, collected from Yangdong District, Yangxi County, and Yangjiang County of Guangdong Province, China using an HPGe based gamma spectrometry system. The measured mean activity of 226Ra, 232Th and 40K in soil samples was found to be 31.19 ± 1.2, 47.00 ± 2.30 and 589.31 ± 17.52 Bqkg-1, respectively. The measured mean activity of these radionuclides in all water samples was found to be below minimum detectable activity. The measured mean activity of 226Ra, 232Th and 40K in vegetation samples was 19.92 ± 3.09, 25.36 ± 8.11 and 4982.94 ± 85.68 Bqkg-1, respectively. No anthropogenic 137Cs was detected in these environmental samples. Mean radium equivalent activity (Raeq), external radiation hazard index (Hex), internal radiation hazard index (Hin) and absorbed dose rate (D) for the area under study were determined as 142.92 Bqkg-1, 0.38, 0.47 and 66.47 nGyh-1, respectively. The annual effective dose equivalent (AEDE) varied in the range from 0.03 to 0.12 mSvy-1. It is concluded that the surveyed area do not pose any significant radiological risk to the population and environment.展开更多
The enhancement of the precision of phase estimation in quantum metrology is investigated by employing weak measurement （WM） and quantum measurement reversal （QMR）. We derive the exact expressions of the optimal q...The enhancement of the precision of phase estimation in quantum metrology is investigated by employing weak measurement （WM） and quantum measurement reversal （QMR）. We derive the exact expressions of the optimal quantum Fisher information （QFI） and success probability of phase estimation for an exactly solving model consisting of a qubit interacting with a structured reservoir. We show that the QFI can be obviously enhanced by means of the WM and QMR in different regimes. In addition, we also show that the magnitude of the decoherence involved in the WM and QMR can be a general complex number, which extends the applicable scope of the WM and QMR approach.展开更多
This paper presents an effective approach for updating finite element dynamic model from incomplete modal data identified from ambient vibration measurements.The proposed method is based on the relationship between th...This paper presents an effective approach for updating finite element dynamic model from incomplete modal data identified from ambient vibration measurements.The proposed method is based on the relationship between the perturbation of structural parameters such as stiffness and mass changes and the modal data measurements of the tested structure such as measured mode shape readings.Structural updating parameters including both stiffness and mass parameters are employed to represent the differences in structural parameters between the finite element model and the associated tested structure.These updating parameters are then evaluated by an iterative solution procedure,giving optimised solutions in the least squares sense without requiring an optimisation technique.In order to reduce the influence of modal measurement uncertainty,the truncated singular value decomposition regularization method incorporating the quasi-optimality criterion is employed to produce reliable solutions for the structural updating parameters.Finally,the numerical investigations of a space frame structure and the practical applications to the Canton Tower benchmark problem demonstrate that the proposed method can correctly update the given finite element model using the incomplete modal data identified from the recorded ambient vibration measurements.展开更多
The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system, the nonlinearity must be eliminated b...The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system, the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network （RBF-NN）, where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square （LMS） algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine＇s performance and the tolerance error 0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.展开更多
An ultra-thin multi-LED package is designed, manufactured and its thermal performance is character- ized. The objective of this study is to develop an efficient thermal modelling approach for this system which can be ...An ultra-thin multi-LED package is designed, manufactured and its thermal performance is character- ized. The objective of this study is to develop an efficient thermal modelling approach for this system which can be used for optimization of the thermal-performance of future ultra-thin designs. A high-resolution thermal imaging camera and thermocouples were used to measure the temperature distribution of the multi-LED package and the LED-die temperature for different operating powers. Finally, we compare the thermal measurements with the finite element simulation results. It is concluded that the modelling approach can assist in the thermal optimization of future multi-LED package designs.展开更多
This study proposes a novel scheme of a cross- correlation frequency-resolved optical gating （X-FROG） measurement for an optical based on the sum frequency arbitrary waveform （OAW） generation （SFG） effect of a p...This study proposes a novel scheme of a cross- correlation frequency-resolved optical gating （X-FROG） measurement for an optical based on the sum frequency arbitrary waveform （OAW） generation （SFG） effect of a periodically poled lithium niobate （PPLN） waveguide. Based on the SFG effect and combined with the principal component generalized projects algorithm on a matrix, the theory model of the scheme is established. Using Matlab, the proposed OAW measurement X-FROG scheme using the PPLN waveguide is simulated and studied. Simulation results show that a rectangular pulse is a suitable gate pulse because of its low errors. Moreover, the increased complexity of OAW and phase mismatch decrease measurement accuracy.展开更多
基金Supported by National Science and Technology Major Project of China (51674271)Major Technical Field Test of PetroChina (2019F-33)。
文摘With the help of digital image processing technology, an automatic measurement method for the three-phase contact angles in the pore throats of the microfluidic model was established using the microfluidic water flooding experiment videos as the data source. The results of the new method were verified through comparing with the manual measurement data.On this basis, the dynamic changes of the three-phase contact angles under flow conditions were clarified by the contact angles probability density curve and mean value change curve. The results show that, for water-wetting rocks, the mean value of the contact angles is acute angle during the early stage of the water flooding process, and it increases with the displacement time and becomes obtuse angle in the middle-late stage of displacement as the dominant force of oil phase gradually changes from viscous force to capillary force. The droplet flow in the remaining oil occurs in the central part of the pore throats, without three-phase contact angle. The contact angles for the porous flow and the columnar flow change slightly during the displacement and present as obtuse angles in view of mean values, which makes the remaining oil poorly movable and thus hard to be recovered. The mean value of the contact angle for the cluster flow tends to increase in the flooding process, which makes the remaining oil more difficult to be recovered. The contact angles for the membrane flow are mainly obtuse angles and reach the highest mean value in the late stage of displacement, which makes the remaining oil most difficult to be recovered. After displacement, the remaining oils under different flow regimes are just subjected to capillary force, with obtuse contact angles, and the wettability of the pore throat walls in the microfluidic model tends to be oil-wet under the action of crude oil.
文摘To realize high-precision attitude stabilization of a flexible spacecraft in the presence of complex disturbances and measurement noises,an iterative learning disturbance observer(ILDO)is presented in this paper.Firstly,a dynamic model of disturbance is built by augmenting the integral of the lumped disturbance as a state.Based on it,ILDO is designed by introducing iterative learning structures.Then,comparative analyses of ILDO and traditional disturbance observers are carried out in frequency domain.It demonstrates that ILDO combines the advantages of high accuracy in disturbance estimation and favorable robustness to measurement noise.After that,an ILDO based composite controller is designed to stabilize the spacecraft attitude.Finally,the effectiveness of the proposed control scheme is verified by simulations.
文摘Environmental radioactivity is produced by radioactive materials in the human environment. While some radioisotopes, such as strontium-90 (90Sr) and technetium-99 (99Tc), are only found on Earth as a result of human activity, and some, like potassium-40 (40K), are only present due to natural processes, a few isotopes, e.g. tritium (3H), result from both natural processes and human activities. The concentration and location of some natural isotopes, particularly uranium-238 (238U), can be affected by human activity because of the constant exposure of Human beings to radiation caused by terrestrial, extra-terrestrial and anthropogenic radio nuclides, it is necessary to determine and estimate the activity of various radio nuclides in environmental media such as vegetation, soil, and water. In the present research, the activities of 226Ra, 232Th and 40K are measured in soil, vegetation and water samples, collected from Yangdong District, Yangxi County, and Yangjiang County of Guangdong Province, China using an HPGe based gamma spectrometry system. The measured mean activity of 226Ra, 232Th and 40K in soil samples was found to be 31.19 ± 1.2, 47.00 ± 2.30 and 589.31 ± 17.52 Bqkg-1, respectively. The measured mean activity of these radionuclides in all water samples was found to be below minimum detectable activity. The measured mean activity of 226Ra, 232Th and 40K in vegetation samples was 19.92 ± 3.09, 25.36 ± 8.11 and 4982.94 ± 85.68 Bqkg-1, respectively. No anthropogenic 137Cs was detected in these environmental samples. Mean radium equivalent activity (Raeq), external radiation hazard index (Hex), internal radiation hazard index (Hin) and absorbed dose rate (D) for the area under study were determined as 142.92 Bqkg-1, 0.38, 0.47 and 66.47 nGyh-1, respectively. The annual effective dose equivalent (AEDE) varied in the range from 0.03 to 0.12 mSvy-1. It is concluded that the surveyed area do not pose any significant radiological risk to the population and environment.
基金supported by the National Natural Science Foundation of China(Grants No.11247294)the Research Foundation of Education Bureau of Hunan Province,China(Grant No.12C0826)+2 种基金the Doctor Foundation Startup from Hunan University of Arts and Science,China(Grant No.13101039)the Key Laboratory of Photoelectricity Information Integration and Optics Manufacture Technology in Hunan Province,Chinathe Construct Program of the Key Discipline in Hunan University of Arts and Science(Optics),China
文摘The enhancement of the precision of phase estimation in quantum metrology is investigated by employing weak measurement （WM） and quantum measurement reversal （QMR）. We derive the exact expressions of the optimal quantum Fisher information （QFI） and success probability of phase estimation for an exactly solving model consisting of a qubit interacting with a structured reservoir. We show that the QFI can be obviously enhanced by means of the WM and QMR in different regimes. In addition, we also show that the magnitude of the decoherence involved in the WM and QMR can be a general complex number, which extends the applicable scope of the WM and QMR approach.
文摘This paper presents an effective approach for updating finite element dynamic model from incomplete modal data identified from ambient vibration measurements.The proposed method is based on the relationship between the perturbation of structural parameters such as stiffness and mass changes and the modal data measurements of the tested structure such as measured mode shape readings.Structural updating parameters including both stiffness and mass parameters are employed to represent the differences in structural parameters between the finite element model and the associated tested structure.These updating parameters are then evaluated by an iterative solution procedure,giving optimised solutions in the least squares sense without requiring an optimisation technique.In order to reduce the influence of modal measurement uncertainty,the truncated singular value decomposition regularization method incorporating the quasi-optimality criterion is employed to produce reliable solutions for the structural updating parameters.Finally,the numerical investigations of a space frame structure and the practical applications to the Canton Tower benchmark problem demonstrate that the proposed method can correctly update the given finite element model using the incomplete modal data identified from the recorded ambient vibration measurements.
文摘The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system, the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network （RBF-NN）, where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square （LMS） algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine＇s performance and the tolerance error 0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.
基金CATRENE L Project CA502 SEEL-Solutions for Energy-Efficient Lighting for financial support
文摘An ultra-thin multi-LED package is designed, manufactured and its thermal performance is character- ized. The objective of this study is to develop an efficient thermal modelling approach for this system which can be used for optimization of the thermal-performance of future ultra-thin designs. A high-resolution thermal imaging camera and thermocouples were used to measure the temperature distribution of the multi-LED package and the LED-die temperature for different operating powers. Finally, we compare the thermal measurements with the finite element simulation results. It is concluded that the modelling approach can assist in the thermal optimization of future multi-LED package designs.
文摘This study proposes a novel scheme of a cross- correlation frequency-resolved optical gating （X-FROG） measurement for an optical based on the sum frequency arbitrary waveform （OAW） generation （SFG） effect of a periodically poled lithium niobate （PPLN） waveguide. Based on the SFG effect and combined with the principal component generalized projects algorithm on a matrix, the theory model of the scheme is established. Using Matlab, the proposed OAW measurement X-FROG scheme using the PPLN waveguide is simulated and studied. Simulation results show that a rectangular pulse is a suitable gate pulse because of its low errors. Moreover, the increased complexity of OAW and phase mismatch decrease measurement accuracy.
