Mechanical transplanting has been applied to rice cultivation to save labor costs and ease labor shortages in Asian countries, especially in China. However, little information is available related to the characteristi...Mechanical transplanting has been applied to rice cultivation to save labor costs and ease labor shortages in Asian countries, especially in China. However, little information is available related to the characteristics of agronomic performance when comparing inter-sub-specific hybrid rice(IHR) and inbred japonica rice(IJR) under mechanical transplanting method. In 2013 and 2014, field experiments were conducted using IHR(Yongyou 2640) and IJR(Wuyunjing 24) under two cultivation patterns, that is, pot seedlings mechanically transplanted(PS) and carpet seedlings mechanically transplanted(CS). Grain yield, yield components, leaf area index(LAI), leaf area duration(LAD), aboveground biomass, crop growth rate(CGR), nitrogen(N) uptake, and N accumulation were investigated. When compared with CS, PS displayed significantly increased grain yield for both varieties because the larger sink size allowed higher N accumulation from panicle initiation to maturity. Moreover, total aboveground biomass under PS increased significantly compared with that under CS; that is, higher photosynthetic productivity resulted from a greater LAI and higher LAD during the grain filling stage. Higher N absorption capacity in the middle and late growth periods resulted in significantly enhanced total N uptake under PS. When compared with IJR for both treatments, IHR generated 75.2% more grain yield. However, the characteristics creating high yield of IHR were different from those of IJR. Greater aboveground biomass production as well as higher N uptake and accumulation created higher grain yield in IHR than in IJR. These results suggest higher yield could be achieved using PS with IHR, attributing to exploit both yield superiority and productive potential.展开更多
Based on the principle of residual deformation induced by superposition of the welding residual stress and working stress, the welding heat source efficiency has been determined by measuring displacement changes of sp...Based on the principle of residual deformation induced by superposition of the welding residual stress and working stress, the welding heat source efficiency has been determined by measuring displacement changes of specimens under loading and unloading in tensile tests, and combining with calculating welding parameters. Meanwhile, the welding heat source eficiencies obtained are compared with those of the measuring-calculating method. The research results show that the welding heat source efficiencies are almost the same as those obtained by the measuring-calculating method. Therefore, the welding heat source efficiency can be determined accurately by this method, and a new determining method of the heat source efficiency for the welding heat process calculating has been provided.展开更多
This paper presents mechanical quadrature methods （MQMs） for solving nonlinear boundary Helmholtz integral equations. The methods have high accuracy of order O（h3） and low computation complexity. Moreover, the mec...This paper presents mechanical quadrature methods （MQMs） for solving nonlinear boundary Helmholtz integral equations. The methods have high accuracy of order O（h3） and low computation complexity. Moreover, the mechanical quadrature methods are simple without computing any singular integration. A nonlinear system is constructed by discretizing the nonlinear boundary integral equations. The stability and convergence of the system are proved based on an asymptotical compact theory and the Stepleman theorem. Using the h3-Richardson extrapolation algorithms （EAs）, the accuracy to the order of O（h5） is improved. To slove the nonlinear system, the Newton iteration is discussed extensively by using the Ostrowski fixed point theorem. The efficiency of the algorithms is illustrated by numerical examples.展开更多
The stability of coal walls(pillars)can be seriously undermined by diverse in-situ dynamic disturbances.Based on a 3D par-ticle model,this work strives to numerically replicate the major mechanical responses and acous...The stability of coal walls(pillars)can be seriously undermined by diverse in-situ dynamic disturbances.Based on a 3D par-ticle model,this work strives to numerically replicate the major mechanical responses and acoustic emission(AE)behaviors of coal samples under multi-stage compressive cyclic loading with different loading and unloading rates,which is termed differential cyclic loading(DCL).A Weibull-distribution-based model with heterogeneous bond strengths is constructed by both considering the stress-strain relations and AE parameters.Six previously loaded samples were respectively grouped to indicate two DCL regimes,the damage mechanisms for the two groups are explicitly characterized via the time-stress-dependent variation of bond size multiplier,and it is found the two regimes correlate with distinct damage patterns,which involves the competition between stiffness hardening and softening.The numerical b-value is calculated based on the mag-nitudes of AE energy,the results show that both stress level and bond radius multiplier can impact the numerical b-value.The proposed numerical model succeeds in replicating the stress-strain relations of lab data as well as the elastic-after effect in DCL tests.The effect of damping on energy dissipation and phase shift in numerical model is summarized.展开更多
Understanding the differences in yield traits of rice among pothole seedling of mechanical transplanting （PSMT）, carpet seedling of mechanical transplanting （CSMT） and mechanical direct seeding （MDS） is of great...Understanding the differences in yield traits of rice among pothole seedling of mechanical transplanting （PSMT）, carpet seedling of mechanical transplanting （CSMT） and mechanical direct seeding （MDS） is of great importance not only for rice scientists but also for rice farmers to develop a high-yield production system under mechanical conditions in a rice-wheat rotation system. However, such traits are yet to be studied among rice varieties ofjaponica-indica hybrid rice （JIHR）,japonica conventional rice （JCR） and indica hybrid rice （IHR）. Field experiments were conducted in 2014 and 2015, where six cultivars of the three rice types JIHR, JCR and IHR were grown individually with PSMT, CSMT and MDS methods, under respective managements for each method to achieve the maximum attainable yield. Results showed that （i） the PSMT significantly increased grain yield of JIHR by 22.0 and 7.1%, of JCR by 15.6 and 3.7% and of I HR by 22.5 and 7.4%, compared to MDS and CSMT on average across the two years, respectively. The highest yield was produced by the combination of JIHR and PSMT; （ii） high yield under PSMT was mainly attributed to large sink capacity and high-efficient dry matter accumulation. With sufficient panicles per hectare, the increase of spikelet number per panicle, especially the increase in spikelet number of the secondary rachis-branches was determined to be the optimal approach for developing a large sink capacity for rice under PSMT. The optimal tillers development, large leaf area index at heading stage, and high leaf area duration, crop growth rate and net assimilation rate during grain-filling phase could be the cause of sufficient dry matter accumulation for rice under PSMT; （iii） moreover, the PSMT favored plant growth as well as enriched the stems plus sheaths during grain-filling phase, as compared with CSMT and MDS. These results suggest that PSMT may be an alternative approach to increasing grain yield in a rice-wheat rotation system in the lower reaches of the Yangtze River in China.展开更多
Due to local uneven heating during the welding process,the residual stress of the structure after welding affects the reliability of it.In order to ensure the reliability,it is of great significance to test the residu...Due to local uneven heating during the welding process,the residual stress of the structure after welding affects the reliability of it.In order to ensure the reliability,it is of great significance to test the residual stress distribution of the welded joint.It has always been the focus to find a simple and feasible method for residual stress testing to quickly and accurately obtain the residual stress distribution of welded joints.The mechanical measurement method has high measurement accuracy,convenient and easy operation,but it will cause certain damage to the components.Physical measurement method can avoid damage to components,but its test cost is usually high,and its measurement accuracy can also be affected by the material microstructure characteristics of welded components.Based on the advantages and disadvantages of these two residual stress test methods,a modal test method is proposed.This method is a non-destructive measurement method.Based on the mathematical relationship between the residual stress of the welded structure and the natural frequency(mathematical model),the natural frequency is measured through the modal test to calculate the residual stress quickly.However,it is difficult to establish a mathematical model with this method,and it is not suitable for realization.展开更多
Several studies have demonstrated the effect of planting methods on rice yield, but information on the climate resources is limited. This study aims to reveal the effects of planting methods on climate resources assoc...Several studies have demonstrated the effect of planting methods on rice yield, but information on the climate resources is limited. This study aims to reveal the effects of planting methods on climate resources associated with rice yield in a rice-wheat rotation system in the lower reaches of the Yangtze River, China. Field experiments were conducted in 2014 and 2015 with two japonica, two indica hybrid, and two japonica-indica hybrid varieties grown under three mechanized planting methods： carpet seedling of mechanical transplanting（CT）, mechanical direct seeding（DS）, and pot-hole seedling of mechanical transplanting（PT）. The rice yield and total dry matter under PT were greater than those under CT and DS methods. Besides, the entire growth duration and daily production showed significant positive relations with rice yield. Compared with CT and DS, the effective accumulated temperature and cumulative solar radiation of rice under PT were higher in phenological phases. In addition, the dry matter/effective accumulated temperature and solar energy utilization of rice under CT and DS were higher during vegetative phase and lower during reproductive and grain filling phases in contrast to PT. The mean daily temperature and mean daily solar radiation in the entire growth duration showed significant positive correlation with rice yield, total dry matter, and harvest index. This study demonstrated that when the mean daily temperature is 〈25.1°C in vegetative phase and 〉20.1°C in grain filling phase, rice yield could be increased by selecting mechanized planting methods. Most varieties under PT method exhibited high yield and climate resources use efficiency compared with CT and DS. In conclusion, the PT method could be a better cultivation measure for high rice yield, accompanied with high temperature and solar radiation use efficiency in a rice-wheat rotation system in the lower reaches of the Yangtze River, China.展开更多
A modified molecular structural mechanics method, based on molecular mechanics and similar to the finite element method, was developed. The energy of a system was expressed by the force field functions of the molecula...A modified molecular structural mechanics method, based on molecular mechanics and similar to the finite element method, was developed. The energy of a system was expressed by the force field functions of the molecular mechanics. Under the small deformation assumption and by the principle of minimum potential energy, the system function was established. The properties of tension and bending of single-walled carbon nanotubes were analyzed. The Young＇s modulus is about 0.36 TPa nm, which agrees perfectly with the results of previous analysis by other researchers. It is found, for the first time, that the Young＇s moduli, for Zigzag nanotubes, are different from each other when the system energy was expressed as the sum of two or three individual energy terms in molecular mechanics. Whereas, the Young＇s moduli were the same for the Armchair nanotubes. It is found, when simulating the bending, that the deflections are closer to the theoretical ones, of the classical elasticity, when the diameter of the carbon nanotube increases.展开更多
As a new-style stochastic algorithm, the electromagnetism-like mechanism（EM） method gains more and more attention from many researchers in recent years. A novel model based on EM（NMEM） for multiobjective optimizat...As a new-style stochastic algorithm, the electromagnetism-like mechanism（EM） method gains more and more attention from many researchers in recent years. A novel model based on EM（NMEM） for multiobjective optimization problems is proposed, which regards the charge of all particles as the constraints in the current population and the measure of the uniformity of non-dominated solutions as the objective function. The charge of the particle is evaluated based on the dominated concept, and its magnitude determines the direction of a force between two particles. Numerical studies are carried out on six complex test functions and the experimental results demonstrate that the proposed NMEM algorithm is a very robust method for solving the multiobjective optimization problems.展开更多
The spheroidal wave functions are found to have extensive applications in many branches of physics and mathematics. We use the perturbation method in supersymmetric quantum mechanics to obtain the analytic ground eige...The spheroidal wave functions are found to have extensive applications in many branches of physics and mathematics. We use the perturbation method in supersymmetric quantum mechanics to obtain the analytic ground eigenvalue and the ground eigenfunction of the angular spheroidal wave equation at low frequency in a series form. Using this approach, the numerical determinations of the ground eigenvalue and the ground eigenfunction for small complex frequencies are also obtained.展开更多
The purpose of this study was to investigate the effect of bolt profile on load transfer mechanism of fully grouted bolts in jointed rocks using analytical and numerical methods. Based on the analytical method with de...The purpose of this study was to investigate the effect of bolt profile on load transfer mechanism of fully grouted bolts in jointed rocks using analytical and numerical methods. Based on the analytical method with development of methods, a new model is presented. To validate the analytical model, five different profiles modeled by ANSYS software. The profile of rock bolts T3 and T4with load transfer capacity,respectively 180 and 195 kN in the jointed rocks was selected as the optimum profiles. Finally, the selected profiles were examined in Tabas Coal Mine. FLAC analysis indicates that patterns 6+7 with2 NO flexi bolt 4 m better than other patterns within the faulted zone.展开更多
Objective: To study the treatment of B-Thalas-semia (ThE) with Chinese herbal medicine for Bushen Yisui (BSYS), its theoretical base and molecular mechanism. Methods: Seventy-eight patients with ThE were treated with ...Objective: To study the treatment of B-Thalas-semia (ThE) with Chinese herbal medicine for Bushen Yisui (BSYS), its theoretical base and molecular mechanism. Methods: Seventy-eight patients with ThE were treated with BSYS recipe (consisted of 11 Chinese herbal drugs as Dogwood fruit, Fleeceflower root, prepared Rehmannia root and turtle shell, etc.) orally taken, 3 times per day, 10 g/time, 3 months as one therapeutic course. Hemoglobin (Hb), red blood cell (RBC), reticulocyte (Ret) and hemoglobin F (HbF) were checked every month. At the same time, PAGE, PVR, PCR-SSCP, RT-PCR, DNA series analysis, mRNA gene expression analysis techniques were used to conduct the systematic gene analysis in patients to study the molecular mechanism of TCM treatment from aspects of gene mutation, gene expression and control-regulation. Results: All the blood criteria in patients after BSYS treatment were improved significantly with clinical symptoms展开更多
Gradient cemented carbides with the surface depleted in cubic phases were prepared following normal powder metallurgical pro-cedures.Gradient zone formation and the influence of nitrogen introduction methods on the mi...Gradient cemented carbides with the surface depleted in cubic phases were prepared following normal powder metallurgical pro-cedures.Gradient zone formation and the influence of nitrogen introduction methods on the microstructure and performance of the alloys were investigated.The results show that the simple one-step vacuum sintering technique is doable for producing gradient cemented carbides.Gradient structure formation is attributed to the gradient in nitrogen activity during sintering,but is independent from nitrogen introduced methods.A uniform carbon distribution is found throughout the materials.Moreover,the transverse rupture strength of the cemented carbides can be increased by a gradient layer.Different nitrogen carriers give the alloys distinguishing microstructure and mechanical properties,and a gradient alloy with ultrafine-TiC0.5N0.5 is found optimal.展开更多
Phspho-olivine Li Fe PO4 was synthesized from the relatively insoluble lithium source Li2CO3, proper iron and phosphorus sources（n（Li）：n（Fe）：n（P）=1：1：1） by a novel hydrothermal method. Afterwards, the opti...Phspho-olivine Li Fe PO4 was synthesized from the relatively insoluble lithium source Li2CO3, proper iron and phosphorus sources（n（Li）：n（Fe）：n（P）=1：1：1） by a novel hydrothermal method. Afterwards, the optimal sample was mixed with glucose and two-step calcinated（500 ℃ and 750 ℃） under high-purity N2 to obtain the Li Fe PO4/C composite. The resultant samples were characterized by X-ray diffraction（XRD）, atomic absorption spectrometry（AAS）, scanning electron microscops（SEM）, transmission electron microscopy（TEM）, energy dispersive spectrometry（EDS）, elementary analysis（EA） and electrochemical tests. The results show that the optimal reaction condition is to set the reactant concentration at 0.5 mol·L^-1, the reaction temperature at 180 ℃ for 16 h duration. During the reaction course, an intermediate product NH4 Fe PO4·H2O was first synthesized, and then it reacted with Li＋ to form Li Fe PO4. The optimized Li Fe PO4 sample with an average particle size（300 to 500 nm） and regular morphology exhibits a relatively high discharge capacity of 84.95 m Ah· g^-1 at the first charge-discharge cycle（0.1C, 1C=170 m A·g^-1）. Moreover, the prepared Li Fe PO4/C composite shows a high discharge capacity of 154.3 m Ah·g^-1 at 0.1C and 128.2 m Ah·g^-1 even at 5C. Besides it has good reversibility and stability in CV test.展开更多
The mechanical grinding method was used to make rice and wheat straw flakes and the properties of the interface of straws before and after grinding were evaluated. The particle boards were prepared using two kinds of ...The mechanical grinding method was used to make rice and wheat straw flakes and the properties of the interface of straws before and after grinding were evaluated. The particle boards were prepared using two kinds of straw flakes, respectively and their physical and mechanical properties were investigated. The results showed that the rice straw was easier to be broken when compared with wheat straw and the inner surface of cells in grinded straws was exposed remarkably. The characteristic peaks of lignin and cellulose on the surface of wheat straw were more significant than rice straw. The free-radical concentrations of straws were increased dramatically after being grinded with heating in the range from I00 ~C to 200 ~C. The surface free energy of straws was also improved after being grinded and the value in wheat straw was higher than that of rice straw, which implies that wheat straw was easier to be bonded than rice straw. The physical and mechanical properties of two kinds of straw particle boards could achieve the requirements of Chinese National Standards of GB 4897.3-2003, while wheat straw particle boards had better properties than those made from rice straws.展开更多
Resolvent methods are presented for generating systematically iterative numerical algorithms for constrained problems in mechanics.The abstract framework corresponds to a general mixed finite element subdif-ferential ...Resolvent methods are presented for generating systematically iterative numerical algorithms for constrained problems in mechanics.The abstract framework corresponds to a general mixed finite element subdif-ferential model,with dual and primal evolution versions,which is shown to apply to problems of fluid dynamics,transport phenomena and solid mechanics,among others.In this manner,Uzawa's type methods and penalization-duality schemes,as well as macro-hybrid formulations,are generalized to non necessarily potential nanlinear mechanical problems.展开更多
An element based on the harmonic functions for Performing vibration analysis oflinkages was developed to propose the matrix-transit equations and the kineto-elastrodynamics(KED) different equations. Method and the KED...An element based on the harmonic functions for Performing vibration analysis oflinkages was developed to propose the matrix-transit equations and the kineto-elastrodynamics(KED) different equations. Method and the KED equations was continllous undertaken by themodal superposition approach. The results from those equations include the quasistatic parts andthe dynamic parts. The dynamic parts equaled to the developing parts of the computationaccurations.展开更多
The factor of safety of mechanically stabilized earth(MSE) structures can be analyzed either using limit equilibrium method(LEM) or strength reduction method(SRM) in finite element/difference method. In LEM, the stren...The factor of safety of mechanically stabilized earth(MSE) structures can be analyzed either using limit equilibrium method(LEM) or strength reduction method(SRM) in finite element/difference method. In LEM, the strengths of the reinforcement members and soils are reduced with the same factor. While using the SRM, only soil strength is reduced during the calculation of the factor of safety. This causes inconsistence in calculating the factor of safety of the MSE structures. To overcome this, an iteration method is proposed to consider the strength reduction of the reinforcements in SRM. The method is demonstrated by using PLAXIS, a finite element software. The results show that the factor of safety converges after a few iterations. The reduction of strength has different effects on the factor of safety depending on the properties of the reinforcements and the soil, and failure modes.展开更多
The mechanical state of cantilever gearbox housing is different from ordinary ones due to the long arm of force caused by cantilever structure.Conventional mechanical analysis methods either took cantilever gearbox ho...The mechanical state of cantilever gearbox housing is different from ordinary ones due to the long arm of force caused by cantilever structure.Conventional mechanical analysis methods either took cantilever gearbox housing as ordinary ones or cantilever beam.Few published papers have specially focused on mechanical analysis method for cantilever gearbox housing.This paper takes a longwall shearer cutting unit gearbox(SCUG)as an example and the mechanical analysis method is investigated according to the causes of fatigue for SCUG.Force analysis model is established for finding out regions of static fatigue caused by low-frequency loads,and local resonance analysis is used for finding out regions of vibration fatigue caused by high-frequency loads.Not only bending moment but also torque caused by gear meshing forces is taken into account in the force analysis model.Vibration response is obtained from cutting experiment,and dominant frequencies of local resonance are obtained by frequency domain analysis.Finite element model of SCUG is established,and natural frequencies and strain modes are analyzed for obtaining the main vibration modes corresponding to dominant frequencies.Hence,large stress regions caused by low and high frequency loads are obtained.Results show that the worst working condition is oblique cutting,and the stress of B-B in 600 mm cutting depth can reach 166 MPa.Obviously,950 Hz,1250 Hz,and 1400 Hz are dominant frequencies of SCUG(23rd,25th and 27th natural frequencies).Generally,this paper proposes some principles for mechanical analysis method of cantilever gearbox housing.展开更多
The human serotonin transporter(SERT)terminates neurotransmission by removing serotonin from the synaptic cleft,which is an essential process that plays an important role in depression.In addition to natural substrate...The human serotonin transporter(SERT)terminates neurotransmission by removing serotonin from the synaptic cleft,which is an essential process that plays an important role in depression.In addition to natural substrate serotonin,SERT is also the target of the abused drug cocaine and,clinically used antidepressants,escitalopram,and paroxetine.To date,few studies have attempted to investigate the unbinding mechanism underlying the orthosteric and allosteric modulation of SERT.In this article,the conserved property of the orthosteric and allosteric sites(S1 and S2)of SERT was revealed by combining the high resolutions of x-ray crystal structures and molecular dynamics(MD)simulations.The residues Tyr95 and Ser438 located within the S1 site,and Arg104 located within the S2 site in SERT illustrate conserved interactions(hydrogen bonds and hydrophobic interactions),as responses to selective serotonin reuptake inhibitors.Van der Waals interactions were keys to designing effective drugs inhibiting SERT and further,electrostatic interactions highlighted escitalopram as a potent antidepressant.We found that cocaine,escitalopram,and paroxetine,whether the S1 site or the S2 site,were more competitive.According to this potential of mean force(PMF)simulations,the new insights reveal the principles of competitive inhibitors that lengths of trails from central SERT to an opening were~18A for serotonin and~22 A for the above-mentioned three drugs.Furthermore,the distance between the natural substrate serotonin and cocaine(or escitalopram)at the allosteric site was~3A.Thus,it can be inferred that the potent antidepressants tended to bind at deeper positions of the S1 or the S2 site of SERT in comparison to the substrate.Continuing exploring the processes of unbinding four ligands against the two target pockets of SERT,this study observed a broad pathway in which serotonin,cocaine,escitalopram(at the S1 site),and paroxetine all were pulled out to an opening between MT1b and MT6a,which may be helpful to understand the dissociation mechanism of antidepressants.展开更多
基金the National Key Research Program of China(2016YFD0300503)the Special Fund for Agro-scientific Research in the Public Interest,China(201303102)+2 种基金the Key Research Program of Jiangsu Province,China(BE2016344)the Major Independent Innovation Project in Jiangsu Province,China(CX(15)1002)a project funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘Mechanical transplanting has been applied to rice cultivation to save labor costs and ease labor shortages in Asian countries, especially in China. However, little information is available related to the characteristics of agronomic performance when comparing inter-sub-specific hybrid rice(IHR) and inbred japonica rice(IJR) under mechanical transplanting method. In 2013 and 2014, field experiments were conducted using IHR(Yongyou 2640) and IJR(Wuyunjing 24) under two cultivation patterns, that is, pot seedlings mechanically transplanted(PS) and carpet seedlings mechanically transplanted(CS). Grain yield, yield components, leaf area index(LAI), leaf area duration(LAD), aboveground biomass, crop growth rate(CGR), nitrogen(N) uptake, and N accumulation were investigated. When compared with CS, PS displayed significantly increased grain yield for both varieties because the larger sink size allowed higher N accumulation from panicle initiation to maturity. Moreover, total aboveground biomass under PS increased significantly compared with that under CS; that is, higher photosynthetic productivity resulted from a greater LAI and higher LAD during the grain filling stage. Higher N absorption capacity in the middle and late growth periods resulted in significantly enhanced total N uptake under PS. When compared with IJR for both treatments, IHR generated 75.2% more grain yield. However, the characteristics creating high yield of IHR were different from those of IJR. Greater aboveground biomass production as well as higher N uptake and accumulation created higher grain yield in IHR than in IJR. These results suggest higher yield could be achieved using PS with IHR, attributing to exploit both yield superiority and productive potential.
文摘Based on the principle of residual deformation induced by superposition of the welding residual stress and working stress, the welding heat source efficiency has been determined by measuring displacement changes of specimens under loading and unloading in tensile tests, and combining with calculating welding parameters. Meanwhile, the welding heat source eficiencies obtained are compared with those of the measuring-calculating method. The research results show that the welding heat source efficiencies are almost the same as those obtained by the measuring-calculating method. Therefore, the welding heat source efficiency can be determined accurately by this method, and a new determining method of the heat source efficiency for the welding heat process calculating has been provided.
基金supported by the National Natural Science Foundation of China(No.10871034)the Natural Science Foundation Project of Chongqing(No.CSTC20-10BB8270)+1 种基金the Air Force Office of Scientific Research(No.FA9550-08-1-0136)the National Science Foundation(No.OCE-0620464)
文摘This paper presents mechanical quadrature methods （MQMs） for solving nonlinear boundary Helmholtz integral equations. The methods have high accuracy of order O（h3） and low computation complexity. Moreover, the mechanical quadrature methods are simple without computing any singular integration. A nonlinear system is constructed by discretizing the nonlinear boundary integral equations. The stability and convergence of the system are proved based on an asymptotical compact theory and the Stepleman theorem. Using the h3-Richardson extrapolation algorithms （EAs）, the accuracy to the order of O（h5） is improved. To slove the nonlinear system, the Newton iteration is discussed extensively by using the Ostrowski fixed point theorem. The efficiency of the algorithms is illustrated by numerical examples.
基金funded by Open Fund of State Key Laboratory of Water Resource Protection and Utilization in Coal Mining (GJNY-20-113-03),SHGF-16-19the Fundamental Research Funds for the Central Universities (06500182)+2 种基金Funds from Joint National-Local Engineering Research Center for Safe and Precise Coal Mining (EC2021004)Funds from State Key Laboratory of Coal Resources in Western China (SKLCRKF20-07)Funds from Humboldt Research Fellowship,Funds from NSFC (52204086).
文摘The stability of coal walls(pillars)can be seriously undermined by diverse in-situ dynamic disturbances.Based on a 3D par-ticle model,this work strives to numerically replicate the major mechanical responses and acoustic emission(AE)behaviors of coal samples under multi-stage compressive cyclic loading with different loading and unloading rates,which is termed differential cyclic loading(DCL).A Weibull-distribution-based model with heterogeneous bond strengths is constructed by both considering the stress-strain relations and AE parameters.Six previously loaded samples were respectively grouped to indicate two DCL regimes,the damage mechanisms for the two groups are explicitly characterized via the time-stress-dependent variation of bond size multiplier,and it is found the two regimes correlate with distinct damage patterns,which involves the competition between stiffness hardening and softening.The numerical b-value is calculated based on the mag-nitudes of AE energy,the results show that both stress level and bond radius multiplier can impact the numerical b-value.The proposed numerical model succeeds in replicating the stress-strain relations of lab data as well as the elastic-after effect in DCL tests.The effect of damping on energy dissipation and phase shift in numerical model is summarized.
基金The Special Fund for Agro-scientific Research in the Public Interest(201303102)the Major Independent Innovation Project in Jiangsu Province,China(CX(15)1002)+3 种基金the National Key Research Program of China(2016YFD0300503)the Science and Technology Plan of Jiangsu Province,China(BE2015340)the Research Innovation Program for College Graduates of Jiangsu Province,China(KYLX15_1369)a Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China supported this study
文摘Understanding the differences in yield traits of rice among pothole seedling of mechanical transplanting （PSMT）, carpet seedling of mechanical transplanting （CSMT） and mechanical direct seeding （MDS） is of great importance not only for rice scientists but also for rice farmers to develop a high-yield production system under mechanical conditions in a rice-wheat rotation system. However, such traits are yet to be studied among rice varieties ofjaponica-indica hybrid rice （JIHR）,japonica conventional rice （JCR） and indica hybrid rice （IHR）. Field experiments were conducted in 2014 and 2015, where six cultivars of the three rice types JIHR, JCR and IHR were grown individually with PSMT, CSMT and MDS methods, under respective managements for each method to achieve the maximum attainable yield. Results showed that （i） the PSMT significantly increased grain yield of JIHR by 22.0 and 7.1%, of JCR by 15.6 and 3.7% and of I HR by 22.5 and 7.4%, compared to MDS and CSMT on average across the two years, respectively. The highest yield was produced by the combination of JIHR and PSMT; （ii） high yield under PSMT was mainly attributed to large sink capacity and high-efficient dry matter accumulation. With sufficient panicles per hectare, the increase of spikelet number per panicle, especially the increase in spikelet number of the secondary rachis-branches was determined to be the optimal approach for developing a large sink capacity for rice under PSMT. The optimal tillers development, large leaf area index at heading stage, and high leaf area duration, crop growth rate and net assimilation rate during grain-filling phase could be the cause of sufficient dry matter accumulation for rice under PSMT; （iii） moreover, the PSMT favored plant growth as well as enriched the stems plus sheaths during grain-filling phase, as compared with CSMT and MDS. These results suggest that PSMT may be an alternative approach to increasing grain yield in a rice-wheat rotation system in the lower reaches of the Yangtze River in China.
基金Project was supported by the National Natural Science Foundation of China(Grant No.52165034)Science and Technology Programs of Inner Mongolia(Grant No.2020GG0301)+1 种基金Natural Science Foundation of Inner Mongolia Autonomous Region(Grant No.2019MS05061)Scientific Research Projects of Higher Education of Inner Mongolia Autonomous Region Institutions(Grant No.NJZY20066).
文摘Due to local uneven heating during the welding process,the residual stress of the structure after welding affects the reliability of it.In order to ensure the reliability,it is of great significance to test the residual stress distribution of the welded joint.It has always been the focus to find a simple and feasible method for residual stress testing to quickly and accurately obtain the residual stress distribution of welded joints.The mechanical measurement method has high measurement accuracy,convenient and easy operation,but it will cause certain damage to the components.Physical measurement method can avoid damage to components,but its test cost is usually high,and its measurement accuracy can also be affected by the material microstructure characteristics of welded components.Based on the advantages and disadvantages of these two residual stress test methods,a modal test method is proposed.This method is a non-destructive measurement method.Based on the mathematical relationship between the residual stress of the welded structure and the natural frequency(mathematical model),the natural frequency is measured through the modal test to calculate the residual stress quickly.However,it is difficult to establish a mathematical model with this method,and it is not suitable for realization.
基金financially supported by grants from the Major Independent Innovation Project in Jiangsu Province,China(CX(15)1002)the Agricultural Science and Technology Innovation Fund in Jiangsu Province,China(CX(12)1003-09)+3 种基金the National Key Research Program of China(2016YFD0300503)the Science and Technology Plan of Jiangsu Province,China(BE2015340)the Research Innovation Program for College Graduates of Jiangsu Province,China(KYLX15_1369)Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘Several studies have demonstrated the effect of planting methods on rice yield, but information on the climate resources is limited. This study aims to reveal the effects of planting methods on climate resources associated with rice yield in a rice-wheat rotation system in the lower reaches of the Yangtze River, China. Field experiments were conducted in 2014 and 2015 with two japonica, two indica hybrid, and two japonica-indica hybrid varieties grown under three mechanized planting methods： carpet seedling of mechanical transplanting（CT）, mechanical direct seeding（DS）, and pot-hole seedling of mechanical transplanting（PT）. The rice yield and total dry matter under PT were greater than those under CT and DS methods. Besides, the entire growth duration and daily production showed significant positive relations with rice yield. Compared with CT and DS, the effective accumulated temperature and cumulative solar radiation of rice under PT were higher in phenological phases. In addition, the dry matter/effective accumulated temperature and solar energy utilization of rice under CT and DS were higher during vegetative phase and lower during reproductive and grain filling phases in contrast to PT. The mean daily temperature and mean daily solar radiation in the entire growth duration showed significant positive correlation with rice yield, total dry matter, and harvest index. This study demonstrated that when the mean daily temperature is 〈25.1°C in vegetative phase and 〉20.1°C in grain filling phase, rice yield could be increased by selecting mechanized planting methods. Most varieties under PT method exhibited high yield and climate resources use efficiency compared with CT and DS. In conclusion, the PT method could be a better cultivation measure for high rice yield, accompanied with high temperature and solar radiation use efficiency in a rice-wheat rotation system in the lower reaches of the Yangtze River, China.
文摘A modified molecular structural mechanics method, based on molecular mechanics and similar to the finite element method, was developed. The energy of a system was expressed by the force field functions of the molecular mechanics. Under the small deformation assumption and by the principle of minimum potential energy, the system function was established. The properties of tension and bending of single-walled carbon nanotubes were analyzed. The Young＇s modulus is about 0.36 TPa nm, which agrees perfectly with the results of previous analysis by other researchers. It is found, for the first time, that the Young＇s moduli, for Zigzag nanotubes, are different from each other when the system energy was expressed as the sum of two or three individual energy terms in molecular mechanics. Whereas, the Young＇s moduli were the same for the Armchair nanotubes. It is found, when simulating the bending, that the deflections are closer to the theoretical ones, of the classical elasticity, when the diameter of the carbon nanotube increases.
基金supported by the National Natural Science Foundation of China(60873099)the Fundamental Research Funds for the Central Universities(2011QNA29)
文摘As a new-style stochastic algorithm, the electromagnetism-like mechanism（EM） method gains more and more attention from many researchers in recent years. A novel model based on EM（NMEM） for multiobjective optimization problems is proposed, which regards the charge of all particles as the constraints in the current population and the measure of the uniformity of non-dominated solutions as the objective function. The charge of the particle is evaluated based on the dominated concept, and its magnitude determines the direction of a force between two particles. Numerical studies are carried out on six complex test functions and the experimental results demonstrate that the proposed NMEM algorithm is a very robust method for solving the multiobjective optimization problems.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.10875018 and 10773002)
文摘The spheroidal wave functions are found to have extensive applications in many branches of physics and mathematics. We use the perturbation method in supersymmetric quantum mechanics to obtain the analytic ground eigenvalue and the ground eigenfunction of the angular spheroidal wave equation at low frequency in a series form. Using this approach, the numerical determinations of the ground eigenvalue and the ground eigenfunction for small complex frequencies are also obtained.
文摘The purpose of this study was to investigate the effect of bolt profile on load transfer mechanism of fully grouted bolts in jointed rocks using analytical and numerical methods. Based on the analytical method with development of methods, a new model is presented. To validate the analytical model, five different profiles modeled by ANSYS software. The profile of rock bolts T3 and T4with load transfer capacity,respectively 180 and 195 kN in the jointed rocks was selected as the optimum profiles. Finally, the selected profiles were examined in Tabas Coal Mine. FLAC analysis indicates that patterns 6+7 with2 NO flexi bolt 4 m better than other patterns within the faulted zone.
文摘Objective: To study the treatment of B-Thalas-semia (ThE) with Chinese herbal medicine for Bushen Yisui (BSYS), its theoretical base and molecular mechanism. Methods: Seventy-eight patients with ThE were treated with BSYS recipe (consisted of 11 Chinese herbal drugs as Dogwood fruit, Fleeceflower root, prepared Rehmannia root and turtle shell, etc.) orally taken, 3 times per day, 10 g/time, 3 months as one therapeutic course. Hemoglobin (Hb), red blood cell (RBC), reticulocyte (Ret) and hemoglobin F (HbF) were checked every month. At the same time, PAGE, PVR, PCR-SSCP, RT-PCR, DNA series analysis, mRNA gene expression analysis techniques were used to conduct the systematic gene analysis in patients to study the molecular mechanism of TCM treatment from aspects of gene mutation, gene expression and control-regulation. Results: All the blood criteria in patients after BSYS treatment were improved significantly with clinical symptoms
基金supported by the Science and Technology Projects of Sichuan Province,China,(No.2008GZ0179)
文摘Gradient cemented carbides with the surface depleted in cubic phases were prepared following normal powder metallurgical pro-cedures.Gradient zone formation and the influence of nitrogen introduction methods on the microstructure and performance of the alloys were investigated.The results show that the simple one-step vacuum sintering technique is doable for producing gradient cemented carbides.Gradient structure formation is attributed to the gradient in nitrogen activity during sintering,but is independent from nitrogen introduced methods.A uniform carbon distribution is found throughout the materials.Moreover,the transverse rupture strength of the cemented carbides can be increased by a gradient layer.Different nitrogen carriers give the alloys distinguishing microstructure and mechanical properties,and a gradient alloy with ultrafine-TiC0.5N0.5 is found optimal.
基金Funded by the National Natural Science Foundation of China(No.51004074)
文摘Phspho-olivine Li Fe PO4 was synthesized from the relatively insoluble lithium source Li2CO3, proper iron and phosphorus sources（n（Li）：n（Fe）：n（P）=1：1：1） by a novel hydrothermal method. Afterwards, the optimal sample was mixed with glucose and two-step calcinated（500 ℃ and 750 ℃） under high-purity N2 to obtain the Li Fe PO4/C composite. The resultant samples were characterized by X-ray diffraction（XRD）, atomic absorption spectrometry（AAS）, scanning electron microscops（SEM）, transmission electron microscopy（TEM）, energy dispersive spectrometry（EDS）, elementary analysis（EA） and electrochemical tests. The results show that the optimal reaction condition is to set the reactant concentration at 0.5 mol·L^-1, the reaction temperature at 180 ℃ for 16 h duration. During the reaction course, an intermediate product NH4 Fe PO4·H2O was first synthesized, and then it reacted with Li＋ to form Li Fe PO4. The optimized Li Fe PO4 sample with an average particle size（300 to 500 nm） and regular morphology exhibits a relatively high discharge capacity of 84.95 m Ah· g^-1 at the first charge-discharge cycle（0.1C, 1C=170 m A·g^-1）. Moreover, the prepared Li Fe PO4/C composite shows a high discharge capacity of 154.3 m Ah·g^-1 at 0.1C and 128.2 m Ah·g^-1 even at 5C. Besides it has good reversibility and stability in CV test.
文摘The mechanical grinding method was used to make rice and wheat straw flakes and the properties of the interface of straws before and after grinding were evaluated. The particle boards were prepared using two kinds of straw flakes, respectively and their physical and mechanical properties were investigated. The results showed that the rice straw was easier to be broken when compared with wheat straw and the inner surface of cells in grinded straws was exposed remarkably. The characteristic peaks of lignin and cellulose on the surface of wheat straw were more significant than rice straw. The free-radical concentrations of straws were increased dramatically after being grinded with heating in the range from I00 ~C to 200 ~C. The surface free energy of straws was also improved after being grinded and the value in wheat straw was higher than that of rice straw, which implies that wheat straw was easier to be bonded than rice straw. The physical and mechanical properties of two kinds of straw particle boards could achieve the requirements of Chinese National Standards of GB 4897.3-2003, while wheat straw particle boards had better properties than those made from rice straws.
文摘Resolvent methods are presented for generating systematically iterative numerical algorithms for constrained problems in mechanics.The abstract framework corresponds to a general mixed finite element subdif-ferential model,with dual and primal evolution versions,which is shown to apply to problems of fluid dynamics,transport phenomena and solid mechanics,among others.In this manner,Uzawa's type methods and penalization-duality schemes,as well as macro-hybrid formulations,are generalized to non necessarily potential nanlinear mechanical problems.
文摘An element based on the harmonic functions for Performing vibration analysis oflinkages was developed to propose the matrix-transit equations and the kineto-elastrodynamics(KED) different equations. Method and the KED equations was continllous undertaken by themodal superposition approach. The results from those equations include the quasistatic parts andthe dynamic parts. The dynamic parts equaled to the developing parts of the computationaccurations.
基金Project(41072200)supported by the National Natural Science Foundation of ChinaProject(14PJD032)supported by the Shanghai Pujiang Program,China
文摘The factor of safety of mechanically stabilized earth(MSE) structures can be analyzed either using limit equilibrium method(LEM) or strength reduction method(SRM) in finite element/difference method. In LEM, the strengths of the reinforcement members and soils are reduced with the same factor. While using the SRM, only soil strength is reduced during the calculation of the factor of safety. This causes inconsistence in calculating the factor of safety of the MSE structures. To overcome this, an iteration method is proposed to consider the strength reduction of the reinforcements in SRM. The method is demonstrated by using PLAXIS, a finite element software. The results show that the factor of safety converges after a few iterations. The reduction of strength has different effects on the factor of safety depending on the properties of the reinforcements and the soil, and failure modes.
基金National Key Basic Research Program of China(No.2014CB046303)。
文摘The mechanical state of cantilever gearbox housing is different from ordinary ones due to the long arm of force caused by cantilever structure.Conventional mechanical analysis methods either took cantilever gearbox housing as ordinary ones or cantilever beam.Few published papers have specially focused on mechanical analysis method for cantilever gearbox housing.This paper takes a longwall shearer cutting unit gearbox(SCUG)as an example and the mechanical analysis method is investigated according to the causes of fatigue for SCUG.Force analysis model is established for finding out regions of static fatigue caused by low-frequency loads,and local resonance analysis is used for finding out regions of vibration fatigue caused by high-frequency loads.Not only bending moment but also torque caused by gear meshing forces is taken into account in the force analysis model.Vibration response is obtained from cutting experiment,and dominant frequencies of local resonance are obtained by frequency domain analysis.Finite element model of SCUG is established,and natural frequencies and strain modes are analyzed for obtaining the main vibration modes corresponding to dominant frequencies.Hence,large stress regions caused by low and high frequency loads are obtained.Results show that the worst working condition is oblique cutting,and the stress of B-B in 600 mm cutting depth can reach 166 MPa.Obviously,950 Hz,1250 Hz,and 1400 Hz are dominant frequencies of SCUG(23rd,25th and 27th natural frequencies).Generally,this paper proposes some principles for mechanical analysis method of cantilever gearbox housing.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11904036 and 12175081)Fundamental Research Funds for the Central Universities(Grant No.CCNU22QNOO4)。
文摘The human serotonin transporter(SERT)terminates neurotransmission by removing serotonin from the synaptic cleft,which is an essential process that plays an important role in depression.In addition to natural substrate serotonin,SERT is also the target of the abused drug cocaine and,clinically used antidepressants,escitalopram,and paroxetine.To date,few studies have attempted to investigate the unbinding mechanism underlying the orthosteric and allosteric modulation of SERT.In this article,the conserved property of the orthosteric and allosteric sites(S1 and S2)of SERT was revealed by combining the high resolutions of x-ray crystal structures and molecular dynamics(MD)simulations.The residues Tyr95 and Ser438 located within the S1 site,and Arg104 located within the S2 site in SERT illustrate conserved interactions(hydrogen bonds and hydrophobic interactions),as responses to selective serotonin reuptake inhibitors.Van der Waals interactions were keys to designing effective drugs inhibiting SERT and further,electrostatic interactions highlighted escitalopram as a potent antidepressant.We found that cocaine,escitalopram,and paroxetine,whether the S1 site or the S2 site,were more competitive.According to this potential of mean force(PMF)simulations,the new insights reveal the principles of competitive inhibitors that lengths of trails from central SERT to an opening were~18A for serotonin and~22 A for the above-mentioned three drugs.Furthermore,the distance between the natural substrate serotonin and cocaine(or escitalopram)at the allosteric site was~3A.Thus,it can be inferred that the potent antidepressants tended to bind at deeper positions of the S1 or the S2 site of SERT in comparison to the substrate.Continuing exploring the processes of unbinding four ligands against the two target pockets of SERT,this study observed a broad pathway in which serotonin,cocaine,escitalopram(at the S1 site),and paroxetine all were pulled out to an opening between MT1b and MT6a,which may be helpful to understand the dissociation mechanism of antidepressants.
