An experimental measurement of the lifetime of 3d^(9) ^(2)D_(3/2) metastable level in Mo^(15+)is reported in this work.The Mo^(15+)ions are produced and trapped in an electron beam ion trap with a magnetic field of 0....An experimental measurement of the lifetime of 3d^(9) ^(2)D_(3/2) metastable level in Mo^(15+)is reported in this work.The Mo^(15+)ions are produced and trapped in an electron beam ion trap with a magnetic field of 0.65 T.The decay photons emitted from 3d^(9) ^(2)D_(3/2) level are subsequently recorded via a cooled photomultiplier tube.Through meticulous scrutiny of potential systematic uncertainties affecting the measurement outcomes,we have determined the lifetime of Mo^(15+)3d^(9)2D_(3/2)metastable level to be 2.83(22)ms.The experimental result provides a clear distinguishment from existing calculations based on various theoretical approaches.展开更多
Double differential cross-sections of first Born estimation for ionization of hydrogenic 2S state by electrons are assessed for various kinematics situations in the asymmetric coplanar geometry. A final state wave fun...Double differential cross-sections of first Born estimation for ionization of hydrogenic 2S state by electrons are assessed for various kinematics situations in the asymmetric coplanar geometry. A final state wave function of multiple scattering theory is followed in this study. The present outcomes are compared with those of hydrogenic ground state, 2P state and ground state experimental results. Obtained findings show a good qualitative agreement with existing results.展开更多
Fe based cast alloys with double phases structure of m etastable austenite m atrix an d eutecticcarbide M7 C3 were provided with the excellent properties of high abrasion resistance andhigher i m pact toughness . An i...Fe based cast alloys with double phases structure of m etastable austenite m atrix an d eutecticcarbide M7 C3 were provided with the excellent properties of high abrasion resistance andhigher i m pact toughness . An i m portant reason of high abrasion resistance is hard ness violentincreasing on the m atrix surface because of w ear easily induced m artensite transfor m ation . The exploitation and applications of m etastable austenite m atrix wear alloys of Fe C Cr Nisyste m and Fe C Cr Mn system were described in this paper . The excellent properties of thesealloys w ill be sufficiently indicated by authors’exa m ples . To exploit a class of these alloyswith high abrasion resistance and various im pact toughness for m eeting the requirem ent of dif ferent environ ment , the proble m of the structure design of metastable austenite m atrix wearalloy w as also described in this paper .展开更多
In this paper,a comprehensive understanding of stable and metastable phase equilibria in binary Mg-Gd system was conducted with an aid of the CALculation of PHAse Diagram(CALPHAD)modeling.Firstly,thermodynamic descrip...In this paper,a comprehensive understanding of stable and metastable phase equilibria in binary Mg-Gd system was conducted with an aid of the CALculation of PHAse Diagram(CALPHAD)modeling.Firstly,thermodynamic descriptions of all the stable phases in the Mg-Gd system were re-assessed by considering all the experimental data in the literature.The discrepancy between the phase equilibria and thermochemical properties existing in the previous assessments was eliminated,and the better agreement with the experimental data was achieved in the present assessment.Secondly,the Gibbs energies for metastable β"-Mg3Gd and β"-Mg7Gd were constructed based on the first-principles and CALPHAD computed results as well as their correlation,and then incorporated into the CALPHAD descriptions.The model-predicted solvuses of(Mg)in equilibrium with the metastable β"-Mg7Gd and β'-Mg7Gd compounds showed very good agreement with the limited experimental data.Finally,the presently obtained thermodynamic descriptions of both stable and metastable phases in the binary Mg-Gd system were further validated by realizing the quantitative Scheil-Gulliver solidification simulations of 5 as-cast Mg-Gd alloys,and the successful prediction of the precipitation sequences in Mg-15Gd and Mg-12Gd alloys during the aging process.展开更多
The solubility,metastable zone width(MSZW),and induction time of thiourea for cooling crystallization were experimentally determined in the temperature range of 283-323 K.The solubility data could be well described by...The solubility,metastable zone width(MSZW),and induction time of thiourea for cooling crystallization were experimentally determined in the temperature range of 283-323 K.The solubility data could be well described by the Apelblat equation model as lnx=-99.55+1071.66/T+16.27 lnT.The determinations of the effects of various stirring and cooling rates indicated that the MSZW increased with increasing and decreasing cooling and stirring rates,respectively.Furthermore,the induction times at various temperatures and supersaturation ratios were also measured.The results indicated that homogeneous nucleation could occur at high supersaturation,whereas heterogeneous nucleation was more likely to occur at low supersaturation.Based on the classical nucleation theory and induction period data,the calculated solid-liquid interfacial tensions of thiourea in deionized water at 302.46 and 312.58 K were 2.86 and 2.94 mJ·m^(-2),respectively.展开更多
The non-equilibrium microstructure and a new metastable phase of Al-9.6wt%Mg alloy solidified at 6 GPa were studied by optical microscope,differential scanning calorimetry,X-ray diffraction and transmission electron m...The non-equilibrium microstructure and a new metastable phase of Al-9.6wt%Mg alloy solidified at 6 GPa were studied by optical microscope,differential scanning calorimetry,X-ray diffraction and transmission electron microscope.The results showed that dendrite microstructure was refined,and the solid solubility of Mg in α-Al phase increased greatly.Correspondingly,the lattice parameter of α-Al phase increased.Al3Mg2 phases disappeared under high pressure solidification.In particular,a metastable phase with small size(20 nm or so) was produced in the alloy,its melting temperature range was 464～518.2 ℃,which was higher than that of Al3Mg2 phase(453～465 ℃) under normal pressure.These metastable phases located in the interdendritic position.It was the first time that the metastable phase was found in Al-Mg alloy at a high pressure of 6 GPa.The formation mechanism of the metastable phases was discussed.展开更多
Mg_5Al_(2.4)Zr_(1.7)O_(12) metastable phase was successfully synthesized from analytical-grade Mg O,α-Al_2O_3,MgAl_2O_4,and ZrO_2 under an N_2 atmosphere.The sintering temperature was varied from 1650 to 1780°C,...Mg_5Al_(2.4)Zr_(1.7)O_(12) metastable phase was successfully synthesized from analytical-grade Mg O,α-Al_2O_3,MgAl_2O_4,and ZrO_2 under an N_2 atmosphere.The sintering temperature was varied from 1650 to 1780°C,and the highest amount of Mg_5Al_(2.4)Zr_(1.7)O_(12) appeared in the composite material when the sintering temperature was 1760°C.According to our research of the formation mechanism of Mg_5Al_(2.4)Zr_(1.7)O_(12),the formation and growth of MgAl_2O_4 dominated when the temperature was not higher than 1650°C.When the temperature was higher than 1650°C,MgO and ZrO_2 tended to diffuse into MgAl_2O_4 and the Mg_5Al_(2.4)Zr_(1.7)O_(12) solid solution was formed.When the temperature reached 1760°C,the formation of Mg_5Al_(2.4)Zr_(1.7)O_(12) was completed.The effect of Mg Al_2O_4 spinel crystals was also studied,and their introduction into the composite material promoted the formation and growth of Mg_5Al_(2.4)Zr_(1.7)O_(12).A highly dispersed MgO–Mg Al_2O_4–ZrO_2 composite material was prepared through the decomposition of the Mg_5Al_(2.4)Zr_(1.7)O_(12) metastable phase.The as-prepared composite material showed improved overall physical properties because of the good dispersion of MgO,MgAl_2O_4,and ZrO_2 phases.展开更多
The radiation of material surface by high intensity laser beams is used to produce the uhrafinepowder of pure Fe and ZrO<sub>2</sub>.The morphology,size and phases of the powder were examinedby X-ray diffr...The radiation of material surface by high intensity laser beams is used to produce the uhrafinepowder of pure Fe and ZrO<sub>2</sub>.The morphology,size and phases of the powder were examinedby X-ray diffraetometer,scanning electron microscopy as well as transmission electronmicroscopy.In pure Fe a considerable quantity of γ-phase was found in the powder.InZrO<sub>2</sub> powder,instead of stable phase,two metastable phases appeared.展开更多
The metastable liquid phase separation and rapid solidification behaviors of Co_(40) Fe_(40) Cu_(20) alloy were investigated by using differential thermal analysis(DTA) in combination with glass fluxing and electromag...The metastable liquid phase separation and rapid solidification behaviors of Co_(40) Fe_(40) Cu_(20) alloy were investigated by using differential thermal analysis(DTA) in combination with glass fluxing and electromagnetic levitation(EML) techniques. The critical liquid phase separation undercooling for this alloy was determined by DTA to be 174 K. Macrosegregation morphologies are formed in the bulk samples processed by both DTA and EML. It is revealed that undercooling level, cooling rate, convection, and surface tension difference between the two separated phases play a dominant role in the coalescence and segregation of the separated phases. The growth velocity of the(Fe,Co) dendrite has been measured as a function of undercooling up to 275 K. The temperature rise resulting from recalescence increases linearly with the increase of undercooling because of the enhancement of recalescence. The slope change of the recalescence temperature rise versus undercooling at the critical undercooling also implies the occurrence of liquid demixing.展开更多
Developing multi phase alloy is an effective approach for the strengthening and toughening of the L1 2 Al 3Ti alloy. A Nb modified Al 3Ti base alloy which has a L1 2 matrix and the precipitated second phase has been d...Developing multi phase alloy is an effective approach for the strengthening and toughening of the L1 2 Al 3Ti alloy. A Nb modified Al 3Ti base alloy which has a L1 2 matrix and the precipitated second phase has been developed. Since the effect of second phase is strongly influenced by its size and distribution, high energy ball milling was employed to fabricate the alloy in comparison with the conventional casting process. It was found that structure evolution during mechanical milling is different for DO 22 , L1 2 and L1 2+DO 22 two phase alloys. The DO 22 Al 3Ti transformed only to a FCC structure even after long time milling. The ordering of L1 2 Al 67 Ti 25 Mn 8 decreased quickly and changed into a FCC structure after short time milling, subsequent milling led to the amorphous transition. The DO 22 phase in Al 3Ti Mn Nb alloys dissolved into the L1 2 matrix quickly in the early stage of milling and the matrix changed into a FCC supersaturated solid solution after 10 h milling, further milling led to the amorphous transition. Reordering of the metastable structures occurred during the annealing process. The consolidated materials consisting of fine equiaxed grains with dispersed particles exhibited remarkable improvement of strength and promising ductility.展开更多
Densities of Ar metastable states 1s_5 and 1s_3 are measured by using the tunable diode laser absorption spectroscopy(TDLAS) in Ar and Ar/O2 mixture dual-frequency capacitively coupled plasma(DF-CCP). We investigate t...Densities of Ar metastable states 1s_5 and 1s_3 are measured by using the tunable diode laser absorption spectroscopy(TDLAS) in Ar and Ar/O2 mixture dual-frequency capacitively coupled plasma(DF-CCP). We investigate the effects of high-frequency(HF, 60 MHz) power, low-frequency(LF, 2 MHz) power, and working pressure on the density of Ar metastable states for three different gas components(0%, 5%, and 10% oxygen mixed in argon). The dependence of Ar metastable state density on the oxygen content is also studied at different working pressures. It is found that densities of Ar metastable states in discharges with different gas components exhibit different behaviors as HF power increases. With the increase of HF power, the metastable density increases rapidly at the initial stage, and then tends to be saturated at a higher HF power. With a small fraction(5% or 10%) of oxygen added in argon plasma, a similar change of the Ar metastable density with HF power can be observed, but the metastable density is saturated at a higher HF power than in the pure argon discharge. In the DF-CCP, the metastable density is found to be higher than in a single frequency discharge, and has weak dependence on LF power. As working pressure increases, the metastable state density first increases and then decreases,and the pressure value, at which the density maximum occurs, decreases with oxygen content increasing. Besides, adding a small fraction of oxygen into argon plasma will significantly dwindle the metastable state density as a result of quenching loss by oxygen molecules.展开更多
The statistical characteristics of the Current fluctuations during metastable pitting of 316L stain- less steel in NaCI solution were studied using potentiostatic method. The growth rates and peak currents of metastab...The statistical characteristics of the Current fluctuations during metastable pitting of 316L stain- less steel in NaCI solution were studied using potentiostatic method. The growth rates and peak currents of metastable pits followed log-normal distributions. As potential and chloride concentration increased, both growth rate and peak current of metastable pits increased. The lifetime of metastable pits also followed log-normal distribution. and was almost not affected by potential. Higher growth rates did not definitely result in larger metastable pits. A certain propagation rate range was found beneficial for the micropit to remain growth. At constant potential, the maximum peak currents in different time intervals during a potentiostatic test followed extreme distribution. The statistical characteristics of metastable pitting may be used to predict the tendency of pitting corrosion.展开更多
This paper (constituting Part A) describes the transformational Tensioned Metastable Fluid Detector (TMFD) based method for “passive” detection of Special Nuclear Materials (SNMs) as related to nuclear security. Pur...This paper (constituting Part A) describes the transformational Tensioned Metastable Fluid Detector (TMFD) based method for “passive” detection of Special Nuclear Materials (SNMs) as related to nuclear security. Purdue University is developing novel, multi-purpose tension metastable fluid nuclear particle detectors by which multiple types of nuclear particles can be detected with high (90%+) intrinsic efficiency, spectroscopic capability, directional information, rapid response, large standoff and significant cost-savings compared with state-of-the-art systems. This paper focuses specifically on recent advances in the use of these novel detector systems for neutron spectroscopy. These techniques will then be discussed and evaluated in the context of area monitoring in waste processing applications with a focus on passive monitoring of radioactive source particles from SNMs. The companion paper (Part B) addresses TMFD technology as it pertains to active interrogation.展开更多
1 Introduction The Pingluoba brine,which characterized as high concentration with sodium,potassium,boron,lithium,and rubidium,possess great development value.The main composition of the brine can be summarized to
The nature of the oxygen contained in β-W was investigated with DSC,X-ray analysis onquenched samples and Auger spectroscope.It was shown that the oxygen contained innonpyrophoric β-W consists of the reversibly chem...The nature of the oxygen contained in β-W was investigated with DSC,X-ray analysis onquenched samples and Auger spectroscope.It was shown that the oxygen contained innonpyrophoric β-W consists of the reversibly chemisorbed oxygen and the interstitial oxygenwhich could form an interstitial solid solution with β-W.It seems better to consider β-W tobe a metastable phase of tungsten with the interstitial oxygen as stabilizer.展开更多
Two kinds of experimental methods were tried in the present work:(i)the powder metallurgy method combined with differential thermal analysis(DTA)to determine the metastable liquidus miscibility gap for a Fe–Cu binary...Two kinds of experimental methods were tried in the present work:(i)the powder metallurgy method combined with differential thermal analysis(DTA)to determine the metastable liquidus miscibility gap for a Fe–Cu binary system and(ii)the high-temperature melting method combined with isothermal treatment to determine the stable liquidus miscibility gap for a Fe–Sn binary system.The experimental method was adopted according to the characteristics of the liquidus miscibility gap of the specific system.Using the powder metallurgy method,a uniform microstructure morphology and chemical composition was obtained in the DTA specimen,and the phase-separation temperature of the supercooled metastable liquid was measured.The isothermal treatment was applied for the samples inside the stable liquidus miscibility gap;here,equilibrated compositions were reached,and a layered morphology was formed after rapid cooling.The liquid miscibility gaps of the Fe–Cu and Fe–Sn binary systems were measured,and the peak temperatures of the corresponding miscibility gaps were determined to be about 1417°C at x(Cu)=0.465 at%and 1350°C at x(Sn)=0.487 at%,respectively.On the basis of the experimental results,both the Fe–Cu and the Fe–Sn binary systems were thermodynamically assessed.展开更多
The precipitation behaviour of Fe-Cr-Mo and Fe-Cr-W alloys during aging has been ex-perimentally studied.It was found that in the early stage of aging,a metastable R phase pre-cipitated in both alloys,it was transform...The precipitation behaviour of Fe-Cr-Mo and Fe-Cr-W alloys during aging has been ex-perimentally studied.It was found that in the early stage of aging,a metastable R phase pre-cipitated in both alloys,it was transformed into stable μ-phase,Laves-phase,X-phase orσ-phase in the later stages.The crystallographic structure of metastable R-phase isrhombohedral with lattice parameters of a=0.9075 nm and α=74.45°.The chemical compo-sition of R-phase is Fe-(27.5—34.9)Mo-(0—25.5)Cr and Fe-(28.9—33.0)W-(9.36—21.0)Cr in at.-% in Fe-Cr-Mo and Fe-Cr-W system,respectively.展开更多
The splat foils of Al-Sm alloys with 0.04-0.06mm in thickness were made by hammeranvil technique. The estimated cooling rute was 106K/ order of magnitude. The extended solid solubility of Sm in α-Al reached 0.5at. % ...The splat foils of Al-Sm alloys with 0.04-0.06mm in thickness were made by hammeranvil technique. The estimated cooling rute was 106K/ order of magnitude. The extended solid solubility of Sm in α-Al reached 0.5at. % Sm. The intermediate phase in the rapidlysolidified Al-Sm alloys is Al11Sm3 phase, which is stable only at temperatures above 1339K in equilibrium state and retained to ambient temperature as a metastable phase, whereas the equlibrium intermediate phase, Al3Sm, was restricted to occur.展开更多
In order to clarify that the IFP and the “Type 2”α phase are also arising from TiC,ametastable β-Ti alloy was selected for investigation in this work.The results showed that af-ter heating the alloy just below the...In order to clarify that the IFP and the “Type 2”α phase are also arising from TiC,ametastable β-Ti alloy was selected for investigation in this work.The results showed that af-ter heating the alloy just below the α+β→β transus temperature and quenching,the TiC lay-er existed at the α/β interface.The morphology of TiC is similar to that of the IFP arisingfrom TiH<sub>2</sub> in the α-β two-phase alloys.The IFP TiC also provided an easy crack path orthe crack initiation sites.The fracture is also identical to that caused by IFP TiH<sub>2</sub>.The arceddiffractions（characteristic of “Type 2”α）were found in the selected area diffraction pat-terns of some specimens which had been isothermally aged after solid solution treatment.Theparticles which bring on the arced diffractions may be TiC on the basis of structure and lat-tice parameter analysis,not the so called “Type 2”α phase.展开更多
基金Project supported by the National Key R&D Program of China(Grant No.2022YFA1602500)the National Natural Science Foundation of China(Grant No.12274352)。
文摘An experimental measurement of the lifetime of 3d^(9) ^(2)D_(3/2) metastable level in Mo^(15+)is reported in this work.The Mo^(15+)ions are produced and trapped in an electron beam ion trap with a magnetic field of 0.65 T.The decay photons emitted from 3d^(9) ^(2)D_(3/2) level are subsequently recorded via a cooled photomultiplier tube.Through meticulous scrutiny of potential systematic uncertainties affecting the measurement outcomes,we have determined the lifetime of Mo^(15+)3d^(9)2D_(3/2)metastable level to be 2.83(22)ms.The experimental result provides a clear distinguishment from existing calculations based on various theoretical approaches.
文摘Double differential cross-sections of first Born estimation for ionization of hydrogenic 2S state by electrons are assessed for various kinematics situations in the asymmetric coplanar geometry. A final state wave function of multiple scattering theory is followed in this study. The present outcomes are compared with those of hydrogenic ground state, 2P state and ground state experimental results. Obtained findings show a good qualitative agreement with existing results.
文摘Fe based cast alloys with double phases structure of m etastable austenite m atrix an d eutecticcarbide M7 C3 were provided with the excellent properties of high abrasion resistance andhigher i m pact toughness . An i m portant reason of high abrasion resistance is hard ness violentincreasing on the m atrix surface because of w ear easily induced m artensite transfor m ation . The exploitation and applications of m etastable austenite m atrix wear alloys of Fe C Cr Nisyste m and Fe C Cr Mn system were described in this paper . The excellent properties of thesealloys w ill be sufficiently indicated by authors’exa m ples . To exploit a class of these alloyswith high abrasion resistance and various im pact toughness for m eeting the requirem ent of dif ferent environ ment , the proble m of the structure design of metastable austenite m atrix wearalloy w as also described in this paper .
基金The financial support from the National Key Research and Development Program of China(Grant no.2016YFB0301101)the Hunan Provincial Science and Technology Program of China(Grant no.2017RS3002)-Huxiang Youth Talent Plan+2 种基金the Youth Talent Project of Innovation-driven Plan at Central South University(Grant no.2019XZ027)the Hebei Provincial Science and Technology Program of China(Grant no.BJ2018026)-Outstanding Young Talents Plan is acknowledgedYing Tang acknowledges the financial support from the Yuanguang fellowship released by Hebei University of Technology.
文摘In this paper,a comprehensive understanding of stable and metastable phase equilibria in binary Mg-Gd system was conducted with an aid of the CALculation of PHAse Diagram(CALPHAD)modeling.Firstly,thermodynamic descriptions of all the stable phases in the Mg-Gd system were re-assessed by considering all the experimental data in the literature.The discrepancy between the phase equilibria and thermochemical properties existing in the previous assessments was eliminated,and the better agreement with the experimental data was achieved in the present assessment.Secondly,the Gibbs energies for metastable β"-Mg3Gd and β"-Mg7Gd were constructed based on the first-principles and CALPHAD computed results as well as their correlation,and then incorporated into the CALPHAD descriptions.The model-predicted solvuses of(Mg)in equilibrium with the metastable β"-Mg7Gd and β'-Mg7Gd compounds showed very good agreement with the limited experimental data.Finally,the presently obtained thermodynamic descriptions of both stable and metastable phases in the binary Mg-Gd system were further validated by realizing the quantitative Scheil-Gulliver solidification simulations of 5 as-cast Mg-Gd alloys,and the successful prediction of the precipitation sequences in Mg-15Gd and Mg-12Gd alloys during the aging process.
基金supported by Top-notch Academic Programs Project of Jiangsu Higher Education Institution(TAPP)Priority Academic Program Development of Jiangsu Higher Education Institutions(PPZY2015A044)support from Jingbo Nanjing Tech University Research Institute(JBNT-2020-003)。
文摘The solubility,metastable zone width(MSZW),and induction time of thiourea for cooling crystallization were experimentally determined in the temperature range of 283-323 K.The solubility data could be well described by the Apelblat equation model as lnx=-99.55+1071.66/T+16.27 lnT.The determinations of the effects of various stirring and cooling rates indicated that the MSZW increased with increasing and decreasing cooling and stirring rates,respectively.Furthermore,the induction times at various temperatures and supersaturation ratios were also measured.The results indicated that homogeneous nucleation could occur at high supersaturation,whereas heterogeneous nucleation was more likely to occur at low supersaturation.Based on the classical nucleation theory and induction period data,the calculated solid-liquid interfacial tensions of thiourea in deionized water at 302.46 and 312.58 K were 2.86 and 2.94 mJ·m^(-2),respectively.
基金This work is financially supported by the Science Foundation of Harbin Institute of Technology ( No HIT2002 29)
文摘The non-equilibrium microstructure and a new metastable phase of Al-9.6wt%Mg alloy solidified at 6 GPa were studied by optical microscope,differential scanning calorimetry,X-ray diffraction and transmission electron microscope.The results showed that dendrite microstructure was refined,and the solid solubility of Mg in α-Al phase increased greatly.Correspondingly,the lattice parameter of α-Al phase increased.Al3Mg2 phases disappeared under high pressure solidification.In particular,a metastable phase with small size(20 nm or so) was produced in the alloy,its melting temperature range was 464～518.2 ℃,which was higher than that of Al3Mg2 phase(453～465 ℃) under normal pressure.These metastable phases located in the interdendritic position.It was the first time that the metastable phase was found in Al-Mg alloy at a high pressure of 6 GPa.The formation mechanism of the metastable phases was discussed.
文摘Mg_5Al_(2.4)Zr_(1.7)O_(12) metastable phase was successfully synthesized from analytical-grade Mg O,α-Al_2O_3,MgAl_2O_4,and ZrO_2 under an N_2 atmosphere.The sintering temperature was varied from 1650 to 1780°C,and the highest amount of Mg_5Al_(2.4)Zr_(1.7)O_(12) appeared in the composite material when the sintering temperature was 1760°C.According to our research of the formation mechanism of Mg_5Al_(2.4)Zr_(1.7)O_(12),the formation and growth of MgAl_2O_4 dominated when the temperature was not higher than 1650°C.When the temperature was higher than 1650°C,MgO and ZrO_2 tended to diffuse into MgAl_2O_4 and the Mg_5Al_(2.4)Zr_(1.7)O_(12) solid solution was formed.When the temperature reached 1760°C,the formation of Mg_5Al_(2.4)Zr_(1.7)O_(12) was completed.The effect of Mg Al_2O_4 spinel crystals was also studied,and their introduction into the composite material promoted the formation and growth of Mg_5Al_(2.4)Zr_(1.7)O_(12).A highly dispersed MgO–Mg Al_2O_4–ZrO_2 composite material was prepared through the decomposition of the Mg_5Al_(2.4)Zr_(1.7)O_(12) metastable phase.The as-prepared composite material showed improved overall physical properties because of the good dispersion of MgO,MgAl_2O_4,and ZrO_2 phases.
文摘The radiation of material surface by high intensity laser beams is used to produce the uhrafinepowder of pure Fe and ZrO<sub>2</sub>.The morphology,size and phases of the powder were examinedby X-ray diffraetometer,scanning electron microscopy as well as transmission electronmicroscopy.In pure Fe a considerable quantity of γ-phase was found in the powder.InZrO<sub>2</sub> powder,instead of stable phase,two metastable phases appeared.
基金Project supported by the National Key Research and Development Program of China(Grant No.2016YFB1100101)the National Natural Science Foundation of China(Grant No.51471135)+2 种基金Shenzhen Science and Technology Program,China(Grant No.JCYJ20170815162201821)Shaanxi Provincial Key R&D Program,China(Grant No.2017KW-ZD-07)the Fundamental Research Funds for the Central Universities,China(Grant No.31020170QD102)
文摘The metastable liquid phase separation and rapid solidification behaviors of Co_(40) Fe_(40) Cu_(20) alloy were investigated by using differential thermal analysis(DTA) in combination with glass fluxing and electromagnetic levitation(EML) techniques. The critical liquid phase separation undercooling for this alloy was determined by DTA to be 174 K. Macrosegregation morphologies are formed in the bulk samples processed by both DTA and EML. It is revealed that undercooling level, cooling rate, convection, and surface tension difference between the two separated phases play a dominant role in the coalescence and segregation of the separated phases. The growth velocity of the(Fe,Co) dendrite has been measured as a function of undercooling up to 275 K. The temperature rise resulting from recalescence increases linearly with the increase of undercooling because of the enhancement of recalescence. The slope change of the recalescence temperature rise versus undercooling at the critical undercooling also implies the occurrence of liquid demixing.
文摘Developing multi phase alloy is an effective approach for the strengthening and toughening of the L1 2 Al 3Ti alloy. A Nb modified Al 3Ti base alloy which has a L1 2 matrix and the precipitated second phase has been developed. Since the effect of second phase is strongly influenced by its size and distribution, high energy ball milling was employed to fabricate the alloy in comparison with the conventional casting process. It was found that structure evolution during mechanical milling is different for DO 22 , L1 2 and L1 2+DO 22 two phase alloys. The DO 22 Al 3Ti transformed only to a FCC structure even after long time milling. The ordering of L1 2 Al 67 Ti 25 Mn 8 decreased quickly and changed into a FCC structure after short time milling, subsequent milling led to the amorphous transition. The DO 22 phase in Al 3Ti Mn Nb alloys dissolved into the L1 2 matrix quickly in the early stage of milling and the matrix changed into a FCC supersaturated solid solution after 10 h milling, further milling led to the amorphous transition. Reordering of the metastable structures occurred during the annealing process. The consolidated materials consisting of fine equiaxed grains with dispersed particles exhibited remarkable improvement of strength and promising ductility.
基金supported by the National Natural Science Foundation of China(Grant Nos.11335004,11722541,11675039,and 11747153)the Important National Science and Technology Specific Project,China(Grant No.2011ZX02403-001)
文摘Densities of Ar metastable states 1s_5 and 1s_3 are measured by using the tunable diode laser absorption spectroscopy(TDLAS) in Ar and Ar/O2 mixture dual-frequency capacitively coupled plasma(DF-CCP). We investigate the effects of high-frequency(HF, 60 MHz) power, low-frequency(LF, 2 MHz) power, and working pressure on the density of Ar metastable states for three different gas components(0%, 5%, and 10% oxygen mixed in argon). The dependence of Ar metastable state density on the oxygen content is also studied at different working pressures. It is found that densities of Ar metastable states in discharges with different gas components exhibit different behaviors as HF power increases. With the increase of HF power, the metastable density increases rapidly at the initial stage, and then tends to be saturated at a higher HF power. With a small fraction(5% or 10%) of oxygen added in argon plasma, a similar change of the Ar metastable density with HF power can be observed, but the metastable density is saturated at a higher HF power than in the pure argon discharge. In the DF-CCP, the metastable density is found to be higher than in a single frequency discharge, and has weak dependence on LF power. As working pressure increases, the metastable state density first increases and then decreases,and the pressure value, at which the density maximum occurs, decreases with oxygen content increasing. Besides, adding a small fraction of oxygen into argon plasma will significantly dwindle the metastable state density as a result of quenching loss by oxygen molecules.
文摘The statistical characteristics of the Current fluctuations during metastable pitting of 316L stain- less steel in NaCI solution were studied using potentiostatic method. The growth rates and peak currents of metastable pits followed log-normal distributions. As potential and chloride concentration increased, both growth rate and peak current of metastable pits increased. The lifetime of metastable pits also followed log-normal distribution. and was almost not affected by potential. Higher growth rates did not definitely result in larger metastable pits. A certain propagation rate range was found beneficial for the micropit to remain growth. At constant potential, the maximum peak currents in different time intervals during a potentiostatic test followed extreme distribution. The statistical characteristics of metastable pitting may be used to predict the tendency of pitting corrosion.
文摘This paper (constituting Part A) describes the transformational Tensioned Metastable Fluid Detector (TMFD) based method for “passive” detection of Special Nuclear Materials (SNMs) as related to nuclear security. Purdue University is developing novel, multi-purpose tension metastable fluid nuclear particle detectors by which multiple types of nuclear particles can be detected with high (90%+) intrinsic efficiency, spectroscopic capability, directional information, rapid response, large standoff and significant cost-savings compared with state-of-the-art systems. This paper focuses specifically on recent advances in the use of these novel detector systems for neutron spectroscopy. These techniques will then be discussed and evaluated in the context of area monitoring in waste processing applications with a focus on passive monitoring of radioactive source particles from SNMs. The companion paper (Part B) addresses TMFD technology as it pertains to active interrogation.
基金Project supported by National High Technology Research and Development Program of China (2012AA061704)China National Nature Science Foundation (No. 41173071)+2 种基金the Research Fund for the Doctoral Program of Higher Education from the Ministry of Education of China (20115122110001)the Sichuan Youth Science and Technology Innovation Research Team Funding Scheme (2013TD0005)Innovation Team of CDUT(KYTD201405)
文摘1 Introduction The Pingluoba brine,which characterized as high concentration with sodium,potassium,boron,lithium,and rubidium,possess great development value.The main composition of the brine can be summarized to
文摘The nature of the oxygen contained in β-W was investigated with DSC,X-ray analysis onquenched samples and Auger spectroscope.It was shown that the oxygen contained innonpyrophoric β-W consists of the reversibly chemisorbed oxygen and the interstitial oxygenwhich could form an interstitial solid solution with β-W.It seems better to consider β-W tobe a metastable phase of tungsten with the interstitial oxygen as stabilizer.
基金supported by National Key Research and Development Program of China (No. 2016YFB0701201)National Natural Science Foundation of China (No. 51271027)
文摘Two kinds of experimental methods were tried in the present work:(i)the powder metallurgy method combined with differential thermal analysis(DTA)to determine the metastable liquidus miscibility gap for a Fe–Cu binary system and(ii)the high-temperature melting method combined with isothermal treatment to determine the stable liquidus miscibility gap for a Fe–Sn binary system.The experimental method was adopted according to the characteristics of the liquidus miscibility gap of the specific system.Using the powder metallurgy method,a uniform microstructure morphology and chemical composition was obtained in the DTA specimen,and the phase-separation temperature of the supercooled metastable liquid was measured.The isothermal treatment was applied for the samples inside the stable liquidus miscibility gap;here,equilibrated compositions were reached,and a layered morphology was formed after rapid cooling.The liquid miscibility gaps of the Fe–Cu and Fe–Sn binary systems were measured,and the peak temperatures of the corresponding miscibility gaps were determined to be about 1417°C at x(Cu)=0.465 at%and 1350°C at x(Sn)=0.487 at%,respectively.On the basis of the experimental results,both the Fe–Cu and the Fe–Sn binary systems were thermodynamically assessed.
文摘The precipitation behaviour of Fe-Cr-Mo and Fe-Cr-W alloys during aging has been ex-perimentally studied.It was found that in the early stage of aging,a metastable R phase pre-cipitated in both alloys,it was transformed into stable μ-phase,Laves-phase,X-phase orσ-phase in the later stages.The crystallographic structure of metastable R-phase isrhombohedral with lattice parameters of a=0.9075 nm and α=74.45°.The chemical compo-sition of R-phase is Fe-(27.5—34.9)Mo-(0—25.5)Cr and Fe-(28.9—33.0)W-(9.36—21.0)Cr in at.-% in Fe-Cr-Mo and Fe-Cr-W system,respectively.
文摘The splat foils of Al-Sm alloys with 0.04-0.06mm in thickness were made by hammeranvil technique. The estimated cooling rute was 106K/ order of magnitude. The extended solid solubility of Sm in α-Al reached 0.5at. % Sm. The intermediate phase in the rapidlysolidified Al-Sm alloys is Al11Sm3 phase, which is stable only at temperatures above 1339K in equilibrium state and retained to ambient temperature as a metastable phase, whereas the equlibrium intermediate phase, Al3Sm, was restricted to occur.
文摘In order to clarify that the IFP and the “Type 2”α phase are also arising from TiC,ametastable β-Ti alloy was selected for investigation in this work.The results showed that af-ter heating the alloy just below the α+β→β transus temperature and quenching,the TiC lay-er existed at the α/β interface.The morphology of TiC is similar to that of the IFP arisingfrom TiH<sub>2</sub> in the α-β two-phase alloys.The IFP TiC also provided an easy crack path orthe crack initiation sites.The fracture is also identical to that caused by IFP TiH<sub>2</sub>.The arceddiffractions（characteristic of “Type 2”α）were found in the selected area diffraction pat-terns of some specimens which had been isothermally aged after solid solution treatment.Theparticles which bring on the arced diffractions may be TiC on the basis of structure and lat-tice parameter analysis,not the so called “Type 2”α phase.
