Exploring a novel strategy for large-scale production of battery-type Ni(OH)_(2)-based composites,with excellent capacitive performance,is still greatly challenging.Herein,we developed a facile and cost-effective stra...Exploring a novel strategy for large-scale production of battery-type Ni(OH)_(2)-based composites,with excellent capacitive performance,is still greatly challenging.Herein,we developed a facile and cost-effective strategy to in situ grow a layer of Ni(OH)_(2)/Ti_(3)C_(2)T_(x)composite on the nickel foam(NF)collector,where Ti_(3)C_(2)T_(x)is not only a conductive component,but also a catalyst that accelerates the oxidation of NF to Ni(OH)_(2).Detailed analysis reveals that the crystallinity,morphology,and electronic structure of the integrated electrode can be tuned via the electrochemical activation,which is beneficial for improving electrical conductivity and redox activity.As expected,the integrated electrode shows a specific capacity of 1.09 C cm^(-2)at 1 mA cm^(-2)after three custom activation cycles and maintains 92.4%of the initial capacity after 1500 cycles.Moreover,a hybrid supercapacitor composed of Ni(OH)_(2)/Ti_(3)C_(2)T_(x)/NF cathode and activated carbon anode provides an energy density of 0.1 mWh cm^(-2)at a power density of 0.97 mW cm^(-2),and excellent cycling stability with about 110%capacity retention rate after 5000 cycles.This work would afford an economical and convenient method to steer commercial Ni foam into advanced Ni(OH)_(2)-based composite materials as binder-free electrodes for hybrid supercapacitors.展开更多
直接焚烧核燃料后处理过程中产生的磷酸三丁酯(TBP)和煤油(OK)有机废液会产生磷酸,会对设备造成一定程度的腐蚀,因此在采用热解焚烧工艺处理该废液时,需掺入合适比例的中和剂和表面活性剂等添加剂,将废液配制成均匀稳定的悬浮液。中和...直接焚烧核燃料后处理过程中产生的磷酸三丁酯(TBP)和煤油(OK)有机废液会产生磷酸,会对设备造成一定程度的腐蚀,因此在采用热解焚烧工艺处理该废液时,需掺入合适比例的中和剂和表面活性剂等添加剂,将废液配制成均匀稳定的悬浮液。中和剂在热解过程中可以固定P2O5,避免磷酸生成后对设备的腐蚀。本文通过不同单因素实验研究以Ca(OH)_(2)和Mg(OH)_(2)为中和剂对配制成的TBP/OK悬浮液性能的影响,为后处理厂热解焚烧系统提供新的悬浮液配方思路。试验结果显示:当TBP含量为30%和60%时,Mg(OH)_(2)在相同TBP含量下配制成的悬浮液的最终表面黏度远大于Ca(OH)_(2),Mg(OH)_(2)和Ca(OH)_(2)在30%TBP时的最终表面黏度分别为90.36 m Pa·s和43.42 mPa·s,在60%TBP时的最终表面黏度分别为95.24 m Pa·s和75.09 m Pa·s,同时Mg(OH)_(2)的乳化速度明显优于Ca(OH)_(2),并具有更好的流动性。以Mg(OH)_(2)为中和剂的悬浮液在不同核素和DBP含量下整体稳定性更好。展开更多
The high activity of metallic magnesium and alloys limits its potential in biomedical applications;in recent years,extensive efforts have been devoted to modulating this reactivity.In this work,we present Mg(OH)_(2) a...The high activity of metallic magnesium and alloys limits its potential in biomedical applications;in recent years,extensive efforts have been devoted to modulating this reactivity.In this work,we present Mg(OH)_(2) and TiO_(2)barrier coatings to reduce the degradation of magnesium alloy(Mg-Ca-Zn)surfaces.These coatings were deposited by the anodization method and the spin-coating technique,respectively.The anodized layer was coated with TiO_(2)generated from the hydrolysis of 3%weight of TTIP(Ti[OCH(CH_(3))_(2)]_(4),Titanium(IV)isopropoxide)in 2-Propanol deposited by the spin-coating method.Studying the degradation in Ringer’s solution by electrochemical impedance spectroscopy and OCP revealed a 98%reduction in pittings in uncoated samples after 14 days of immersion.The p H measurements revealed that the TiO_(2)coating reduced the alkalization of the physiological environment,keeping the pH at 6.0 values.In vitro studies of two types of bacteria(E.coli and S.aureus)exhibited zones of inhibition in the agar and activity bactericidal(kill time test).The mechanisms behind the improved degradation resistance and enhanced antibacterial activity are presented and discussed here.Surface modification with Mg(OH)_(2)/TiO_(2)coatings is a promising strategy to control the biodegradation of magnesium implants for bone regeneration.展开更多
基金supported by the NSF of China(Nos.21971143,21805165,22209098)the 111 Project(D20015)+1 种基金the major research and development project of Hubei Three Gorges Laboratory(2022-3)the Natural Science Foundation of Hubei Province(2022CFB326)
文摘Exploring a novel strategy for large-scale production of battery-type Ni(OH)_(2)-based composites,with excellent capacitive performance,is still greatly challenging.Herein,we developed a facile and cost-effective strategy to in situ grow a layer of Ni(OH)_(2)/Ti_(3)C_(2)T_(x)composite on the nickel foam(NF)collector,where Ti_(3)C_(2)T_(x)is not only a conductive component,but also a catalyst that accelerates the oxidation of NF to Ni(OH)_(2).Detailed analysis reveals that the crystallinity,morphology,and electronic structure of the integrated electrode can be tuned via the electrochemical activation,which is beneficial for improving electrical conductivity and redox activity.As expected,the integrated electrode shows a specific capacity of 1.09 C cm^(-2)at 1 mA cm^(-2)after three custom activation cycles and maintains 92.4%of the initial capacity after 1500 cycles.Moreover,a hybrid supercapacitor composed of Ni(OH)_(2)/Ti_(3)C_(2)T_(x)/NF cathode and activated carbon anode provides an energy density of 0.1 mWh cm^(-2)at a power density of 0.97 mW cm^(-2),and excellent cycling stability with about 110%capacity retention rate after 5000 cycles.This work would afford an economical and convenient method to steer commercial Ni foam into advanced Ni(OH)_(2)-based composite materials as binder-free electrodes for hybrid supercapacitors.
文摘直接焚烧核燃料后处理过程中产生的磷酸三丁酯(TBP)和煤油(OK)有机废液会产生磷酸,会对设备造成一定程度的腐蚀,因此在采用热解焚烧工艺处理该废液时,需掺入合适比例的中和剂和表面活性剂等添加剂,将废液配制成均匀稳定的悬浮液。中和剂在热解过程中可以固定P2O5,避免磷酸生成后对设备的腐蚀。本文通过不同单因素实验研究以Ca(OH)_(2)和Mg(OH)_(2)为中和剂对配制成的TBP/OK悬浮液性能的影响,为后处理厂热解焚烧系统提供新的悬浮液配方思路。试验结果显示:当TBP含量为30%和60%时,Mg(OH)_(2)在相同TBP含量下配制成的悬浮液的最终表面黏度远大于Ca(OH)_(2),Mg(OH)_(2)和Ca(OH)_(2)在30%TBP时的最终表面黏度分别为90.36 m Pa·s和43.42 mPa·s,在60%TBP时的最终表面黏度分别为95.24 m Pa·s和75.09 m Pa·s,同时Mg(OH)_(2)的乳化速度明显优于Ca(OH)_(2),并具有更好的流动性。以Mg(OH)_(2)为中和剂的悬浮液在不同核素和DBP含量下整体稳定性更好。
基金financed by the FOMIX-Yucatán 2008-108160,CONACYT LAB-2009-01-123913,292692,294643,188345,and 204822 projectsthe financial support received from CONACYT。
文摘The high activity of metallic magnesium and alloys limits its potential in biomedical applications;in recent years,extensive efforts have been devoted to modulating this reactivity.In this work,we present Mg(OH)_(2) and TiO_(2)barrier coatings to reduce the degradation of magnesium alloy(Mg-Ca-Zn)surfaces.These coatings were deposited by the anodization method and the spin-coating technique,respectively.The anodized layer was coated with TiO_(2)generated from the hydrolysis of 3%weight of TTIP(Ti[OCH(CH_(3))_(2)]_(4),Titanium(IV)isopropoxide)in 2-Propanol deposited by the spin-coating method.Studying the degradation in Ringer’s solution by electrochemical impedance spectroscopy and OCP revealed a 98%reduction in pittings in uncoated samples after 14 days of immersion.The p H measurements revealed that the TiO_(2)coating reduced the alkalization of the physiological environment,keeping the pH at 6.0 values.In vitro studies of two types of bacteria(E.coli and S.aureus)exhibited zones of inhibition in the agar and activity bactericidal(kill time test).The mechanisms behind the improved degradation resistance and enhanced antibacterial activity are presented and discussed here.Surface modification with Mg(OH)_(2)/TiO_(2)coatings is a promising strategy to control the biodegradation of magnesium implants for bone regeneration.
