A seepage-geomechanical coupled embedded fracture flow model has been established for multi-field coupled simulation in tight oil reservoirs,revealing the patterns of change in pressure field,seepage field,and stress ...A seepage-geomechanical coupled embedded fracture flow model has been established for multi-field coupled simulation in tight oil reservoirs,revealing the patterns of change in pressure field,seepage field,and stress field after long-term water injection in tight oil reservoirs.Based on this,a technique for enhanced oil recovery(EOR)combining multi-field reconstruction and combination of displacement and imbibition in tight oil reservoirs has been proposed.The study shows that after long-term water flooding for tight oil development,the pressure diffusion range is limited,making it difficult to establish an effective displacement system.The variation in geostress exhibits diversity,with the change in horizontal minimum principal stress being greater than that in horizontal maximum principal stress,and the variation around the injection wells being more significant than that around the production wells.The deflection of geostress direction around injection wells is also large.The technology for EOR through multi-field reconstruction and combination of displacement and imbibition employs water injection wells converted to production and large-scale fracturing techniques to restructure the artificial fracture network system.Through a full lifecycle energy replenishment method of pre-fracturing energy supplementation,energy increase during fracturing,well soaking for energy storage,and combination of displacement and imbibition,it effectively addresses the issue of easy channeling of the injection medium and difficult energy replenishment after large-scale fracturing.By intensifying the imbibition effect through the coordination of multiple wells,it reconstructs the combined system of displacement and imbibition under a complex fracture network,transitioning from avoiding fractures to utilizing them,thereby improving microscopic sweep and oil displacement efficiencies.Field application in Block Yuan 284 of the Huaqing Oilfield in the Ordos Basin has demonstrated that this technology increases the recovery factor by 12 percentage points,enabling large scale and efficient development of tight oil.展开更多
For expedited transportation,vehicular tunnels are often designed as two adjacent tunnels,which frequently experience dynamic stress waves from various orientations during blasting excavation.To analyze the impact of ...For expedited transportation,vehicular tunnels are often designed as two adjacent tunnels,which frequently experience dynamic stress waves from various orientations during blasting excavation.To analyze the impact of dynamic loading orientation on the stability of the twin-tunnel,a split Hopkinson pressure bar(SHPB)apparatus was used to conduct a dynamic test on the twin-tunnel specimens.The two tunnels were rotated around the specimen’s center to consider the effect of dynamic loading orientation.LS-DYNA software was used for numerical simulation to reveal the failure properties and stress wave propagation law of the twin-tunnel specimens.The findings indicate that,for a twin-tunnel exposed to a dynamic load from different orientations,the crack initiation position appears most often at the tunnel corner,tunnel spandrel,and tunnel floor.As the impact direction is created by a certain angle(30°,45°,60°,120°,135°,and 150°),the fractures are produced in the middle of the line between the left tunnel corner and the right tunnel spandrel.As the impact loading angle(a)is 90°,the tunnel sustains minimal damage,and only tensile fractures form in the surrounding rocks.The orientation of the impact load could change the stress distribution in the twin-tunnel,and major fractures are more likely to form in areas where the tensile stress is concentrated.展开更多
Carbon dioxide flooding is an effective means of enhanced oil recovery for low permeability reservoirs. If fractures are present in the reservoir, CO2 may flow along the fractures, resulting in low gas displacement ef...Carbon dioxide flooding is an effective means of enhanced oil recovery for low permeability reservoirs. If fractures are present in the reservoir, CO2 may flow along the fractures, resulting in low gas displacement efficiency. Reservoir pore pressure will fluctuate to some extent during a CO2 flood, causing a change in effective confining pressure. The result is rock deformation and a reduction in permeability with the reduction in fracture permeability, causing increased flow resistance in the fracture space. Simultaneously, gas cross flowing along the fractures is partially restrained. In this work, the effect of stress changes on permeability was studied through a series of flow experiments. The change in the flowrate distribution in a matrix block and contained fracture with an increase in effective pressure were analyzed. The results lead to an implicit comparison which shows that permeability of fractured core decreases sharply with an increase in effective confining pressure. The fracture flowrate ratio declines and the matrix flowrate ratio increases. Fracture flow will partially divert to the matrix block with the increase in effective confining pressure, improving gas displacement efficiency.展开更多
The main task of fracture mechanics of rock masses is the study on the propagating mechanism of fractures in rock masses , which can be efficiently conducted by discontinuty displacement (DD) numerical evaluation . Fi...The main task of fracture mechanics of rock masses is the study on the propagating mechanism of fractures in rock masses , which can be efficiently conducted by discontinuty displacement (DD) numerical evaluation . Firstly ,the element stress and displacement are analysed and the principle and steps of the numerical calculation of stress intensity factor and fracture extension force are introduced .The numerical results of parallel and echelon fracture systems ,which are compared with real field fractures .are presented. Finally . a simple engineering application example is presented .展开更多
This study experimentally analyzes the nonlinear flow characteristics and channelization of fluid through rough-walled fractures during the shear process using a shear-flow-visualization apparatus.A series of fluid fl...This study experimentally analyzes the nonlinear flow characteristics and channelization of fluid through rough-walled fractures during the shear process using a shear-flow-visualization apparatus.A series of fluid flow and visualization tests is performed on four transparent fracture specimens with various shear displacements of 1 mm,3 mm,5 mm,7 mm and 10 mm under a normal stress of 0.5 MPa.Four granite fractures with different roughnesses are selected and quantified using variogram fractal dimensions.The obtained results show that the critical Reynolds number tends to increase with increasing shear displacement but decrease with increasing roughness of fracture surface.The flow paths are more tortuous at the beginning of shear because of the wide distribution of small contact spots.As the shear displacement continues to increase,preferential flow paths are more distinctly observed due to the decrease in the number of contact spots caused by shear dilation;yet the area of single contacts in-creases.Based on the experimental results,an empirical mathematical equation is proposed to quantify the critical Reynolds number using the contact area ratio and fractal dimension.展开更多
A fractal model governing saw-tooth fractures was first introduced to replicate sandstone samples containing an inclined 3D penetrating rough fracture surface with various joint roughness coefficients(JRC).In conventi...A fractal model governing saw-tooth fractures was first introduced to replicate sandstone samples containing an inclined 3D penetrating rough fracture surface with various joint roughness coefficients(JRC).In conventional triaxial compression,the peak strength for fractured samples increased with both confining pressure and JRC.During the unloading confining pressure process,the normal stress of fractures declined but the shear stress increased,resulting in shear sliding of fractures.The shear displacement of fractures exponentially increased,and the positive normal displacement decreased gradually to negative values under coupling effects of shear contraction caused by normal stress and shear dilation due to climbing effects of fractures.Transition from quasi-static to dynamic sliding of the fractures was identified.The sliding resistance duration increased with confining pressure but decreased with JRC.After prepeak unloading,the fracture surfaces presented a more significant surface wear response and JRC values decreased by 1.70%–59.20%due to more remarkable asperity degradation compared with those after conventional triaxial compression.The theoretical model for shear strength of fractures was established through improving the Ladanyi&Archambault model by introducing the relations between normal stress and surface wear ratios of fractures,which agreed well with the experimental results.展开更多
Through high-precision engraving,self-affine sandstone joint surfaces with various joint roughness coefficients(JRC=3.21e12.16)were replicated and the shear sliding tests under unloading normal stress were conducted r...Through high-precision engraving,self-affine sandstone joint surfaces with various joint roughness coefficients(JRC=3.21e12.16)were replicated and the shear sliding tests under unloading normal stress were conducted regarding various initial normal stresses(1e7 MPa)and numbers of shearing cycles(1 e5).The peak shear stress of fractures decreased with shear cycles due to progressively smooth surface morphologies,while increased with both JRC and initial normal stress and could be verified using the nonlinear Barton-Bandis failure criterion.The joint friction angle of fractures exponentially increased by 62.22%e64.87%with JRC while decreased by 22.1%e24.85%with shearing cycles.After unloading normal stress,the sliding initiation time of fractures increased with both JRC and initial normal stress due to more tortuous fracture morphologies and enhanced shearing resistance capacity.The surface resistance index(SRI)of fractures decreased by 4.35%e32.02%with increasing shearing cycles due to a more significant reduction of sliding initiation shear stress than that for sliding initiation normal stress,but increased by a factor of 0.41e1.64 with JRC.After sliding initiation,the shear displacement of fractures showed an increase in power function.By defining a sliding rate threshold of 5105 m/s,transition from“quasi-static”to“dynamic”sliding of fractures was identified,and the increase of sliding acceleration steepened with JRC while slowed down with shearing cycles.The normal displacement experienced a slight increase before shear sliding due to deformation recovery as the unloading stress was unloaded,and then enhanced shear dilation after sliding initiation due to climbing effects of surface asperities.Dilation was positively related to the shear sliding velocity of fractures.Wear characteristics of the fracture surfaces after shearing failure were evaluated using binary calculation,indicating an increasing shear area ratio by 45.24%e91.02%with normal stress.展开更多
This paper presents an integrated study from fracture propagation modeling to gas flow modeling and a correlation analysis to explore the key controlling factors of intensive volume fracturing.The fracture propagation...This paper presents an integrated study from fracture propagation modeling to gas flow modeling and a correlation analysis to explore the key controlling factors of intensive volume fracturing.The fracture propagation model takes into account the interaction between hydraulic fracture and natural fracture by means of the displacement discontinuity method(DDM)and the Picard iterative method.The shale gas flow considers multiple transport mechanisms,and the flow in the fracture network is handled by the embedded discrete fracture model(EDFM).A series of numerical simulations are conducted to analyze the effects of the cluster number,stage spacing,stress difference coefficient,and natural fracture distribution on the stimulated fracture area,fractal dimension,and cumulative gas production,and their correlation coefficients are obtained.The results show that the most influential factors to the stimulated fracture area are the stress difference ratio,stage spacing,and natural fracture density,while those to the cumulative gas production are the stress difference ratio,natural fracture density,and cluster number.This indicates that the stress condition dominates the gas production,and employing intensive volume fracturing(by properly increasing the cluster number)is beneficial for improving the final cumulative gas production.展开更多
AIM To determine if ketamine sedation is a safe and cost effective way of treating displaced paediatric radial and ulna fractures in the emergency department. METHODS Following an agreed interdepartmental protocol, fr...AIM To determine if ketamine sedation is a safe and cost effective way of treating displaced paediatric radial and ulna fractures in the emergency department. METHODS Following an agreed interdepartmental protocol, fractures of the radius and ulna(moderately to severely displaced) in children between the age of 2 and 16 years old, presenting within a specified 4 mo period, were manipulated in our paediatric emergency department. Verbal and written consent was obtained prior to procedural sedation to ensure parents were informed and satisfied to have ketamine. A single attempt at manipulation was performed. Pre and postmanipulation radiographs were requested and assessed to ensure adequacy of reduction. Parental satisfaction surveys were collected after the procedure to assess the perceived quality of treatment. After closed reduction and cast immobilisation, patients were then followed-up in the paediatric outpatient fracture clinic and functional outcomes measured prospectively. A cost analysis compared to more formal manipulation under a general anaesthetic was also undertaken.RESULTS During the 4 mo period of study, 10 closed, moderate to severely displaced fractures were identified and treated in the paediatric emergency department using our ketamine sedation protocol. These included fractures of the growth plate(3), fractures of both radius and ulna(6) and a single isolated proximal radius fracture. The mean time from administration of ketamine until completion of the moulded plaster was 20 min. The mean time interval from sedation to full recovery was 74 min. We had no cases of unacceptable fracture reduction and no patients required any further manipulation, either in fracture clinic or under a more formal general anaesthetic. There were no serious adverse events in relation to the use of ketamine. Parents, patients and clinicians reported extremely favourable outcomes using this technique. Furthermore, compared to using a manipulation under general anaesthesia, each case performed under ketamine sedation was associated with a saving of ￡1470, the overall study saving being ￡14700. CONCLUSION Ketamine procedural sedation in the paediatric population is a safe and cost effective method for the treatment of displaced fractures of the radius and ulna, with high parent satisfaction rates.展开更多
Based on imbibition replacement of shut-in well in tight oil reservoirs, this paper expounds the principle of saturation rebalancing during the shut-in process after fracturing, establishes an optimization method for ...Based on imbibition replacement of shut-in well in tight oil reservoirs, this paper expounds the principle of saturation rebalancing during the shut-in process after fracturing, establishes an optimization method for shut-in time after horizontal well volume fracturing with the goal of shortening oil breakthrough time and achieving rapid oil breakthrough, and analyzes the influences of permeability, porosity, fracture half-length and fracturing fluid volume on the shut-in time. The oil and water imbibition displacement in the matrix and fractures occurs during the shut-in process of wells after fracturing. If the shut-in time is too short, the oil-water displacement is not sufficient, and the oil breakthrough time is long after the well is put into production. If the shut-in time is too long, the oil and water displacement is sufficient, but the energy dissipation in the formation near the bottom of the well is severe, and the flowing period is short and the production is low after the well is put into production. A rational shut-in time can help shorten the oil breakthrough time, extend the flowing period and increase the production of the well. The rational shut-in time is influenced by factors such as permeability, porosity, fracture half-length and fracturing fluid volume. The shortest and longest shut-in times are negatively correlated with porosity, permeability, and fracture half-length, and positively correlated with fracturing fluid volume. The pilot test in tight oil horizontal wells in the Songliao Basin, NE China, has confirmed that the proposed optimization method can effectively improve the development effect of horizontal well volume fracturing.展开更多
Aiming at the technology of hydraulic fracturing assisted oil displacement which combines hydraulic fracturing,seepage and oil displacement,an experimental system of energy storage and flowback in fracturing assisted ...Aiming at the technology of hydraulic fracturing assisted oil displacement which combines hydraulic fracturing,seepage and oil displacement,an experimental system of energy storage and flowback in fracturing assisted oil displacement process has been developed and used to simulate the mechanism of percolation,energy storage,oil displacement and flowback of chemical agents in the whole process.The research shows that in hydraulic fracturing assisted oil displacement,the chemical agent could be directly pushed to the deeper area of the low and medium permeability reservoirs,avoiding the viscosity loss and adhesion retention of chemical agents near the pay zone;in addition,this technology could effectively enlarge the swept volume,improve the oil displacement efficiency,replenish formation energy,gather and exploit the scattered residual oil.For the reservoir with higher permeability,this measure takes effect fast,so to lower cost,and the high pressure hydraulic fracturing assisted oil displacement could be adopted directly.For the reservoir with lower permeability which is difficult to absorb water,hydraulic fracturing assisted oil displacement with surfactant should be adopted to reduce flow resistance of the reservoir and improve the water absorption capacity and development effect of the reservoir.The degree of formation energy deficit was the main factor affecting the effective swept range of chemical agents.Moreover,the larger the formation energy deficit was,the further the seepage distance of chemical agents was,accordingly,the larger the effective swept volume was,and the greater the increase of oil recovery was.Formation energy enhancement was the most important contribution to enhanced oil recovery(EOR),which was the key to EOR by the technology of hydraulic fracturing assisted oil displacement.展开更多
Objective:To compare the clinical therapeutic effect of bridge combined internal fixation system and locking compression plate internal fixation in the treatment of displaced midshaft clavicle fractures by emphaticall...Objective:To compare the clinical therapeutic effect of bridge combined internal fixation system and locking compression plate internal fixation in the treatment of displaced midshaft clavicle fractures by emphatically observing fracture healing and shoulder joint function.Methods:Totally 44 elderly patients with Robinson type 2B displaced midshaft clavicle fractures were included from the Department of Orthopaedics,Shenyang Fourth People's Hospital during February 2016 and December 2018,including 23 males and 21 females,mean age(69.8±10.2)years old.The patients were divided into a bridge combined internal fixation system group(bridge group,n=22)and a locking compression plate internal fixation group(plate group,n=22)according to the internal fixation methods.The operation time,intraoperative blood loss,fracture healing time,and postoperative complications were recorded.At 12 months after surgery,the shoulder joint Constant-Murley score and DASH score were used to assess the recovery of joint function.The serum levels of bone turnover biochemical markers procollagen I N-terminal peptide(P1NP),cross-linked Carboxy-terminal telopeptide of typeⅠcollagen(CTX-I),and osteoblast specific factor(OSF)were measured before and 3 months after surgery.Results:The operation time,intraoperative blood loss and fracture healing time of the bridge group were significantly shorter than those of the plate group(P<0.05).Constant scores and DASH scores in the bridge group were significantly better than those of the plate group at 12 months after surgery(P<0.05).Serum levels of CTX-I was significantly decreased,while the P1NP and OSF were significantly increased compared with before surgery in the both groups(P<0.05),and the changes were more obvious in the bridge group(P<0.05).The incidence of complications was similar between the two groups(P<0.05).Conclusion:Compared with the locking plate system,the bridge combined internal fixation system can effectively improve the operation efficiency,have more benefits on fracture healing,better promote the recovery of patients'function,and reduce the failure rate of internal fixation,thus providing a better choice to treat displaced midshaft clavicle fractures by intraoperative internal fixation.展开更多
AIM： To investigate clinical efficacy of displaced intra-articular calcaneal fracture （DIACF） following operation and nonoperation. METHODS： Literature search was performed of PubMed and Cochrane Library by two in...AIM： To investigate clinical efficacy of displaced intra-articular calcaneal fracture （DIACF） following operation and nonoperation. METHODS： Literature search was performed of PubMed and Cochrane Library by two independent authors to identify randomized controlled trials （RCTs） comparing operative vs nonoperative treatment of DIACF from inception to December 31st, 2013. RCT quality was evaluated by the modified Jadad scale. Dichotomous variables were pooled using risk ratios by review manager 5.3 software. Fixed-effects or random-effects models were adopted with P 〉 0.05 or P ≤ 0.05 for heterogeneity tests, respectively.RESULTS： Eight RCTs comprising 767 cases met inclusion criteria. Results revealed that more surgically treated patients could resume pre-injury job （P = 0.006）. No statistical differences were found between the two groups in residual pain （P = 0.33）, shoe fitting problems （P = 0.07）, limited walking distance （P = 0.56） or secondary late arthrodesis （P = 0.38）. However, operative treatment was associated with a higher complication rate （P = 0.003）. Subgroup analyses of specific complications revealed that except for a higher risk of superficial wound problems （P 〈 0.0001） in operative group, the two groups had similar complication rate in deep wound infection （ P = 0.34）,CONCLUSION： Current evidence demonstrates that compared with operative treatment, conservative treatment of DIACF lead to similar clinical outcomes regarding residual pain, shoe fitting, walking distance and secondary subtalar arthrodesis but a significantly lower complication rate.展开更多
The article evaluates 12 cases of conservative treatment of displaced mandibular fractures in adults. Twelve cases of displaced mandibular fractures treated surgically, either by closed reduction (IMF) or open reducti...The article evaluates 12 cases of conservative treatment of displaced mandibular fractures in adults. Twelve cases of displaced mandibular fractures treated surgically, either by closed reduction (IMF) or open reduction internal fixation (ORIF) served as controls. Occlusion, maximal mouth opening, lateral jaw movements, neurological dysfunction (=sensory deficit), and bone remodeling were evaluated and scored in both groups, and results were compared. No significant differences were found between the two groups in all the evaluated parameters. It is concluded that in certain cases, with displacement of 2 - 4 mm, where a surgical approach is not feasible, reasonable spontaneous reduction and bone remodeling can occur. Meticulous follow-up is mandatory.展开更多
Seismic rupture produced by active faulting causes ground surface fracturing and seriously damages buildings.However,the fracture traces are usually indistinct or non-visible because of complicated deformations in Qua...Seismic rupture produced by active faulting causes ground surface fracturing and seriously damages buildings.However,the fracture traces are usually indistinct or non-visible because of complicated deformations in Quaternary unconsolidated materials,so their upper parts can hardly be discovered on exploratory trenches.The aim of this paper is to study the types of fault rupture and displacement in different loose deposit beds from a joint view of mega-,meso-,and microscopic scales,and to find the mark and method for timing the palaeoseismic rupture on exploratory trenches.展开更多
Objective To investigate the clinical outcome of humeral head replacement and individualized rehabilitation for displaced four-part fractures of proximal humerus,to provide clinical guideline of treating complicated f...Objective To investigate the clinical outcome of humeral head replacement and individualized rehabilitation for displaced four-part fractures of proximal humerus,to provide clinical guideline of treating complicated fractures of展开更多
AIM: To investigate the effect of early surgical intervention on the high surgical risk elderly patients who sustained femoral neck fracture(FNF) and taking concomitant antiplatelet agents. METHODS: Between 2010 and 2...AIM: To investigate the effect of early surgical intervention on the high surgical risk elderly patients who sustained femoral neck fracture(FNF) and taking concomitant antiplatelet agents. METHODS: Between 2010 and 2012, a prospective study was conducted on 49 geriatric patients, who took antiplatelet agents, sustained FNF and underwent surgery within 72 h [early surgery(ES) group], and these were compared with a retrospective consecutive case series of patients with similar characteristics(45 cases) who had delayed surgery(DS group) after 72 h during an earlier 3-year period. Postoperative outcomeswere followed for one year and compared. RESULTS: There were non-significant differences in perioperative blood loss, blood transfusion, intensive care unit requirement and postoperative mortality(P > 0.05 all). There were 2 patients(4%) in the DS group who died after surgery(P = 0.23). However, the ES group showed a significantly better postoperative outcome in terms of postoperative complications, length of hospital stay, and functional outcome(P < 0.05 all).CONCLUSION: Early hip surgery in geriatric hip fracture patients with ongoing antiplatelet treatment was not associated with a significant increase of perioperative blood loss and postoperative mortality. Moreover, ES resulted in a better postoperative surgical outcome. In early hip surgery protocol, the antiplatelet agents are discontinued and the patient is operated on within 72 h after admission, which is safe and effective for the medically fit patients.展开更多
This letter reports a fully dynamic analysis of a moving defect with a plastic zone.The fields of stress and displacement of this defect are determined,so that the opening displacement at the tip of the defect is obta...This letter reports a fully dynamic analysis of a moving defect with a plastic zone.The fields of stress and displacement of this defect are determined,so that the opening displacement at the tip of the defect is obtained.Based on it the author proposes a criterion of nonlinear dynamic fracture of solids.展开更多
Abstract： An effective approach was conducted for estimating fracture toughness using the crack opening displacement （COD） method for plasma enhanced chemical vapor deposition （PECVD） coating materials. For this ...Abstract： An effective approach was conducted for estimating fracture toughness using the crack opening displacement （COD） method for plasma enhanced chemical vapor deposition （PECVD） coating materials. For this evaluation, an elastoplastic analysis was used to estimate critical COD values for single edge notched bending （SENB） specimens. The relationship between fracture toughness （Kic） and critical COD for SENB specimens was obtained. Microstructure of the interface between AleO3-TiO2 composite ceramic coatings and AISI 1045 steel substrates was studied by using scanning electron microscope （SEM）. Chemical compositions were clarified by energy-dispersive X-ray spectroscopy （EDS）. The results show that the interface between of Al203-TiO2 and substrate has mechanical combining. The nanohardness of the coatings can reach 1 200 GPa examined by nanoindentation. The Klc was calculated according to this relationship from critical COD. The bending process produces a significant relationship of COD independent of the axial force applied. Fractographic analysis was conducted to determine the crack length. From the physical analysis of nanoindentation curves, the elastic modulus of 1045/AI2O3-TiO2 is 180 GPa for the 50 μm film. The highest value of fracture toughness for 1045/A1203-TiO2-250 μm is 348 MPa·mv2.展开更多
Subcritical crack growth of double torsion specimens made of ore, lherzolite, marble and granite was studied using Instron1342 type electro hydraulic servo test machine. The relations of the mode-I stress intensity fa...Subcritical crack growth of double torsion specimens made of ore, lherzolite, marble and granite was studied using Instron1342 type electro hydraulic servo test machine. The relations of the mode-I stress intensity factor KI versus the subcritical crack growth velocity v and the fracture toughness KIC were obtained by the double torsion constant displacement load relaxation method. The behavior of subcritical crack growth was analyzed for different rocks. The results show that lgKI—lgv relations of four kinds of rocks measured by this method accord with linear rule, i.e. the relations between subcritical crack growth velocity and stress intensity factor have a power law, which is in good agreement with CHARLES theory. lgKI—lgv curves move to top left corner with the decrease of the elastic modulus, which implies that the subcritical crack growth velocity speeds up. The maximum subcritical crack growth velocity exhibits negative exponential increase, and mode-I fracture toughness KIC decreases with the decrease of elastic modulus. The testing results provide a basis for time-dependence of rock engineering stability.展开更多
基金Supported by the Joint Fund Project of the National Natural Science Foundation of China(U22B2075).
文摘A seepage-geomechanical coupled embedded fracture flow model has been established for multi-field coupled simulation in tight oil reservoirs,revealing the patterns of change in pressure field,seepage field,and stress field after long-term water injection in tight oil reservoirs.Based on this,a technique for enhanced oil recovery(EOR)combining multi-field reconstruction and combination of displacement and imbibition in tight oil reservoirs has been proposed.The study shows that after long-term water flooding for tight oil development,the pressure diffusion range is limited,making it difficult to establish an effective displacement system.The variation in geostress exhibits diversity,with the change in horizontal minimum principal stress being greater than that in horizontal maximum principal stress,and the variation around the injection wells being more significant than that around the production wells.The deflection of geostress direction around injection wells is also large.The technology for EOR through multi-field reconstruction and combination of displacement and imbibition employs water injection wells converted to production and large-scale fracturing techniques to restructure the artificial fracture network system.Through a full lifecycle energy replenishment method of pre-fracturing energy supplementation,energy increase during fracturing,well soaking for energy storage,and combination of displacement and imbibition,it effectively addresses the issue of easy channeling of the injection medium and difficult energy replenishment after large-scale fracturing.By intensifying the imbibition effect through the coordination of multiple wells,it reconstructs the combined system of displacement and imbibition under a complex fracture network,transitioning from avoiding fractures to utilizing them,thereby improving microscopic sweep and oil displacement efficiencies.Field application in Block Yuan 284 of the Huaqing Oilfield in the Ordos Basin has demonstrated that this technology increases the recovery factor by 12 percentage points,enabling large scale and efficient development of tight oil.
基金supported by the National Natural Science Foundation of China(Grant Nos.52204104 and U19A2098)the Science and Technology Department of Sichuan Province,China(Grant No.2023YFH0022).
文摘For expedited transportation,vehicular tunnels are often designed as two adjacent tunnels,which frequently experience dynamic stress waves from various orientations during blasting excavation.To analyze the impact of dynamic loading orientation on the stability of the twin-tunnel,a split Hopkinson pressure bar(SHPB)apparatus was used to conduct a dynamic test on the twin-tunnel specimens.The two tunnels were rotated around the specimen’s center to consider the effect of dynamic loading orientation.LS-DYNA software was used for numerical simulation to reveal the failure properties and stress wave propagation law of the twin-tunnel specimens.The findings indicate that,for a twin-tunnel exposed to a dynamic load from different orientations,the crack initiation position appears most often at the tunnel corner,tunnel spandrel,and tunnel floor.As the impact direction is created by a certain angle(30°,45°,60°,120°,135°,and 150°),the fractures are produced in the middle of the line between the left tunnel corner and the right tunnel spandrel.As the impact loading angle(a)is 90°,the tunnel sustains minimal damage,and only tensile fractures form in the surrounding rocks.The orientation of the impact load could change the stress distribution in the twin-tunnel,and major fractures are more likely to form in areas where the tensile stress is concentrated.
基金supported by China National Key BasicResearch Development Program under grant 2006CB705805 entitled"Commercial Utilization of Greenhouse GasEnhanced Oil Recovery and Geological Storage:Study of Nonlinear Percolation Mechanisms of Multi-phase and Multi-component Mixtures of CO2 Flooding"National Key Sci-Tech Major Special Item under grant 2008ZX05009-004 entitled"The Development of Large-scale Oil and GasFields and Coal-bed Methane:New Technology on EnhancedOil Recovery in the Later Period of Oil Field Development".
文摘Carbon dioxide flooding is an effective means of enhanced oil recovery for low permeability reservoirs. If fractures are present in the reservoir, CO2 may flow along the fractures, resulting in low gas displacement efficiency. Reservoir pore pressure will fluctuate to some extent during a CO2 flood, causing a change in effective confining pressure. The result is rock deformation and a reduction in permeability with the reduction in fracture permeability, causing increased flow resistance in the fracture space. Simultaneously, gas cross flowing along the fractures is partially restrained. In this work, the effect of stress changes on permeability was studied through a series of flow experiments. The change in the flowrate distribution in a matrix block and contained fracture with an increase in effective pressure were analyzed. The results lead to an implicit comparison which shows that permeability of fractured core decreases sharply with an increase in effective confining pressure. The fracture flowrate ratio declines and the matrix flowrate ratio increases. Fracture flow will partially divert to the matrix block with the increase in effective confining pressure, improving gas displacement efficiency.
基金The research is supported by the National Nature Science Foundation of China
文摘The main task of fracture mechanics of rock masses is the study on the propagating mechanism of fractures in rock masses , which can be efficiently conducted by discontinuty displacement (DD) numerical evaluation . Firstly ,the element stress and displacement are analysed and the principle and steps of the numerical calculation of stress intensity factor and fracture extension force are introduced .The numerical results of parallel and echelon fracture systems ,which are compared with real field fractures .are presented. Finally . a simple engineering application example is presented .
基金This study has been partially funded by National Key Research and Development Program of China(Grant No.2020YFA0711800)the National Natural Science Foundation of China(Grant No.51979272)the Natural Science Foundation of Shandong Province,China(Grant No.ZR2021QE069).
文摘This study experimentally analyzes the nonlinear flow characteristics and channelization of fluid through rough-walled fractures during the shear process using a shear-flow-visualization apparatus.A series of fluid flow and visualization tests is performed on four transparent fracture specimens with various shear displacements of 1 mm,3 mm,5 mm,7 mm and 10 mm under a normal stress of 0.5 MPa.Four granite fractures with different roughnesses are selected and quantified using variogram fractal dimensions.The obtained results show that the critical Reynolds number tends to increase with increasing shear displacement but decrease with increasing roughness of fracture surface.The flow paths are more tortuous at the beginning of shear because of the wide distribution of small contact spots.As the shear displacement continues to increase,preferential flow paths are more distinctly observed due to the decrease in the number of contact spots caused by shear dilation;yet the area of single contacts in-creases.Based on the experimental results,an empirical mathematical equation is proposed to quantify the critical Reynolds number using the contact area ratio and fractal dimension.
基金The financial support from the National Natural Science Foundation of China(Nos.52174092,51904290,52004272,and 52274145)Natural Science Foundation of Jiangsu Province,China(Nos.BK20220157 and BK20200660)+2 种基金the Fundamental Research Funds for the Central Universities,China(No.2022YCPY0202)Xuzhou Science and Technology Project,China(Nos.KC21033 and KC22005)Yunlong Lake Laboratory of Deep Underground Science and Engineering Project,China(No.104023002)。
文摘A fractal model governing saw-tooth fractures was first introduced to replicate sandstone samples containing an inclined 3D penetrating rough fracture surface with various joint roughness coefficients(JRC).In conventional triaxial compression,the peak strength for fractured samples increased with both confining pressure and JRC.During the unloading confining pressure process,the normal stress of fractures declined but the shear stress increased,resulting in shear sliding of fractures.The shear displacement of fractures exponentially increased,and the positive normal displacement decreased gradually to negative values under coupling effects of shear contraction caused by normal stress and shear dilation due to climbing effects of fractures.Transition from quasi-static to dynamic sliding of the fractures was identified.The sliding resistance duration increased with confining pressure but decreased with JRC.After prepeak unloading,the fracture surfaces presented a more significant surface wear response and JRC values decreased by 1.70%–59.20%due to more remarkable asperity degradation compared with those after conventional triaxial compression.The theoretical model for shear strength of fractures was established through improving the Ladanyi&Archambault model by introducing the relations between normal stress and surface wear ratios of fractures,which agreed well with the experimental results.
基金support from the National Natural Science Foundation of China(Grant Nos.52174092 and 52104125)the Fundamental Research Funds for the Central Universities,China(Grant No.2022YCPY0202)is gratefully acknowledged.
文摘Through high-precision engraving,self-affine sandstone joint surfaces with various joint roughness coefficients(JRC=3.21e12.16)were replicated and the shear sliding tests under unloading normal stress were conducted regarding various initial normal stresses(1e7 MPa)and numbers of shearing cycles(1 e5).The peak shear stress of fractures decreased with shear cycles due to progressively smooth surface morphologies,while increased with both JRC and initial normal stress and could be verified using the nonlinear Barton-Bandis failure criterion.The joint friction angle of fractures exponentially increased by 62.22%e64.87%with JRC while decreased by 22.1%e24.85%with shearing cycles.After unloading normal stress,the sliding initiation time of fractures increased with both JRC and initial normal stress due to more tortuous fracture morphologies and enhanced shearing resistance capacity.The surface resistance index(SRI)of fractures decreased by 4.35%e32.02%with increasing shearing cycles due to a more significant reduction of sliding initiation shear stress than that for sliding initiation normal stress,but increased by a factor of 0.41e1.64 with JRC.After sliding initiation,the shear displacement of fractures showed an increase in power function.By defining a sliding rate threshold of 5105 m/s,transition from“quasi-static”to“dynamic”sliding of fractures was identified,and the increase of sliding acceleration steepened with JRC while slowed down with shearing cycles.The normal displacement experienced a slight increase before shear sliding due to deformation recovery as the unloading stress was unloaded,and then enhanced shear dilation after sliding initiation due to climbing effects of surface asperities.Dilation was positively related to the shear sliding velocity of fractures.Wear characteristics of the fracture surfaces after shearing failure were evaluated using binary calculation,indicating an increasing shear area ratio by 45.24%e91.02%with normal stress.
基金supported by the National Natural Science Foundation of China(Nos.52274038,5203401042174143)+1 种基金the Taishan Scholars Project(No.tsqnz20221140)the Open Fund of State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation(Southwest Petroleum University)of China(No.PLN2020-5)。
文摘This paper presents an integrated study from fracture propagation modeling to gas flow modeling and a correlation analysis to explore the key controlling factors of intensive volume fracturing.The fracture propagation model takes into account the interaction between hydraulic fracture and natural fracture by means of the displacement discontinuity method(DDM)and the Picard iterative method.The shale gas flow considers multiple transport mechanisms,and the flow in the fracture network is handled by the embedded discrete fracture model(EDFM).A series of numerical simulations are conducted to analyze the effects of the cluster number,stage spacing,stress difference coefficient,and natural fracture distribution on the stimulated fracture area,fractal dimension,and cumulative gas production,and their correlation coefficients are obtained.The results show that the most influential factors to the stimulated fracture area are the stress difference ratio,stage spacing,and natural fracture density,while those to the cumulative gas production are the stress difference ratio,natural fracture density,and cluster number.This indicates that the stress condition dominates the gas production,and employing intensive volume fracturing(by properly increasing the cluster number)is beneficial for improving the final cumulative gas production.
文摘AIM To determine if ketamine sedation is a safe and cost effective way of treating displaced paediatric radial and ulna fractures in the emergency department. METHODS Following an agreed interdepartmental protocol, fractures of the radius and ulna(moderately to severely displaced) in children between the age of 2 and 16 years old, presenting within a specified 4 mo period, were manipulated in our paediatric emergency department. Verbal and written consent was obtained prior to procedural sedation to ensure parents were informed and satisfied to have ketamine. A single attempt at manipulation was performed. Pre and postmanipulation radiographs were requested and assessed to ensure adequacy of reduction. Parental satisfaction surveys were collected after the procedure to assess the perceived quality of treatment. After closed reduction and cast immobilisation, patients were then followed-up in the paediatric outpatient fracture clinic and functional outcomes measured prospectively. A cost analysis compared to more formal manipulation under a general anaesthetic was also undertaken.RESULTS During the 4 mo period of study, 10 closed, moderate to severely displaced fractures were identified and treated in the paediatric emergency department using our ketamine sedation protocol. These included fractures of the growth plate(3), fractures of both radius and ulna(6) and a single isolated proximal radius fracture. The mean time from administration of ketamine until completion of the moulded plaster was 20 min. The mean time interval from sedation to full recovery was 74 min. We had no cases of unacceptable fracture reduction and no patients required any further manipulation, either in fracture clinic or under a more formal general anaesthetic. There were no serious adverse events in relation to the use of ketamine. Parents, patients and clinicians reported extremely favourable outcomes using this technique. Furthermore, compared to using a manipulation under general anaesthesia, each case performed under ketamine sedation was associated with a saving of ￡1470, the overall study saving being ￡14700. CONCLUSION Ketamine procedural sedation in the paediatric population is a safe and cost effective method for the treatment of displaced fractures of the radius and ulna, with high parent satisfaction rates.
基金Supported by China National Major Project of Science and Technology(2016ZX05046-004)PetroChina Major Project of Science and Technology(2017B-4905)PetroChina Jilin Oilfield Company Major Project of Science and Technology(JY21A2-12).
文摘Based on imbibition replacement of shut-in well in tight oil reservoirs, this paper expounds the principle of saturation rebalancing during the shut-in process after fracturing, establishes an optimization method for shut-in time after horizontal well volume fracturing with the goal of shortening oil breakthrough time and achieving rapid oil breakthrough, and analyzes the influences of permeability, porosity, fracture half-length and fracturing fluid volume on the shut-in time. The oil and water imbibition displacement in the matrix and fractures occurs during the shut-in process of wells after fracturing. If the shut-in time is too short, the oil-water displacement is not sufficient, and the oil breakthrough time is long after the well is put into production. If the shut-in time is too long, the oil and water displacement is sufficient, but the energy dissipation in the formation near the bottom of the well is severe, and the flowing period is short and the production is low after the well is put into production. A rational shut-in time can help shorten the oil breakthrough time, extend the flowing period and increase the production of the well. The rational shut-in time is influenced by factors such as permeability, porosity, fracture half-length and fracturing fluid volume. The shortest and longest shut-in times are negatively correlated with porosity, permeability, and fracture half-length, and positively correlated with fracturing fluid volume. The pilot test in tight oil horizontal wells in the Songliao Basin, NE China, has confirmed that the proposed optimization method can effectively improve the development effect of horizontal well volume fracturing.
基金Supported by the National Natural Science Foundation of China(52074087,51804076)Postdoctoral Natural Science Foundation of China(2021M690528).
文摘Aiming at the technology of hydraulic fracturing assisted oil displacement which combines hydraulic fracturing,seepage and oil displacement,an experimental system of energy storage and flowback in fracturing assisted oil displacement process has been developed and used to simulate the mechanism of percolation,energy storage,oil displacement and flowback of chemical agents in the whole process.The research shows that in hydraulic fracturing assisted oil displacement,the chemical agent could be directly pushed to the deeper area of the low and medium permeability reservoirs,avoiding the viscosity loss and adhesion retention of chemical agents near the pay zone;in addition,this technology could effectively enlarge the swept volume,improve the oil displacement efficiency,replenish formation energy,gather and exploit the scattered residual oil.For the reservoir with higher permeability,this measure takes effect fast,so to lower cost,and the high pressure hydraulic fracturing assisted oil displacement could be adopted directly.For the reservoir with lower permeability which is difficult to absorb water,hydraulic fracturing assisted oil displacement with surfactant should be adopted to reduce flow resistance of the reservoir and improve the water absorption capacity and development effect of the reservoir.The degree of formation energy deficit was the main factor affecting the effective swept range of chemical agents.Moreover,the larger the formation energy deficit was,the further the seepage distance of chemical agents was,accordingly,the larger the effective swept volume was,and the greater the increase of oil recovery was.Formation energy enhancement was the most important contribution to enhanced oil recovery(EOR),which was the key to EOR by the technology of hydraulic fracturing assisted oil displacement.
文摘Objective:To compare the clinical therapeutic effect of bridge combined internal fixation system and locking compression plate internal fixation in the treatment of displaced midshaft clavicle fractures by emphatically observing fracture healing and shoulder joint function.Methods:Totally 44 elderly patients with Robinson type 2B displaced midshaft clavicle fractures were included from the Department of Orthopaedics,Shenyang Fourth People's Hospital during February 2016 and December 2018,including 23 males and 21 females,mean age(69.8±10.2)years old.The patients were divided into a bridge combined internal fixation system group(bridge group,n=22)and a locking compression plate internal fixation group(plate group,n=22)according to the internal fixation methods.The operation time,intraoperative blood loss,fracture healing time,and postoperative complications were recorded.At 12 months after surgery,the shoulder joint Constant-Murley score and DASH score were used to assess the recovery of joint function.The serum levels of bone turnover biochemical markers procollagen I N-terminal peptide(P1NP),cross-linked Carboxy-terminal telopeptide of typeⅠcollagen(CTX-I),and osteoblast specific factor(OSF)were measured before and 3 months after surgery.Results:The operation time,intraoperative blood loss and fracture healing time of the bridge group were significantly shorter than those of the plate group(P<0.05).Constant scores and DASH scores in the bridge group were significantly better than those of the plate group at 12 months after surgery(P<0.05).Serum levels of CTX-I was significantly decreased,while the P1NP and OSF were significantly increased compared with before surgery in the both groups(P<0.05),and the changes were more obvious in the bridge group(P<0.05).The incidence of complications was similar between the two groups(P<0.05).Conclusion:Compared with the locking plate system,the bridge combined internal fixation system can effectively improve the operation efficiency,have more benefits on fracture healing,better promote the recovery of patients'function,and reduce the failure rate of internal fixation,thus providing a better choice to treat displaced midshaft clavicle fractures by intraoperative internal fixation.
文摘AIM： To investigate clinical efficacy of displaced intra-articular calcaneal fracture （DIACF） following operation and nonoperation. METHODS： Literature search was performed of PubMed and Cochrane Library by two independent authors to identify randomized controlled trials （RCTs） comparing operative vs nonoperative treatment of DIACF from inception to December 31st, 2013. RCT quality was evaluated by the modified Jadad scale. Dichotomous variables were pooled using risk ratios by review manager 5.3 software. Fixed-effects or random-effects models were adopted with P 〉 0.05 or P ≤ 0.05 for heterogeneity tests, respectively.RESULTS： Eight RCTs comprising 767 cases met inclusion criteria. Results revealed that more surgically treated patients could resume pre-injury job （P = 0.006）. No statistical differences were found between the two groups in residual pain （P = 0.33）, shoe fitting problems （P = 0.07）, limited walking distance （P = 0.56） or secondary late arthrodesis （P = 0.38）. However, operative treatment was associated with a higher complication rate （P = 0.003）. Subgroup analyses of specific complications revealed that except for a higher risk of superficial wound problems （P 〈 0.0001） in operative group, the two groups had similar complication rate in deep wound infection （ P = 0.34）,CONCLUSION： Current evidence demonstrates that compared with operative treatment, conservative treatment of DIACF lead to similar clinical outcomes regarding residual pain, shoe fitting, walking distance and secondary subtalar arthrodesis but a significantly lower complication rate.
文摘The article evaluates 12 cases of conservative treatment of displaced mandibular fractures in adults. Twelve cases of displaced mandibular fractures treated surgically, either by closed reduction (IMF) or open reduction internal fixation (ORIF) served as controls. Occlusion, maximal mouth opening, lateral jaw movements, neurological dysfunction (=sensory deficit), and bone remodeling were evaluated and scored in both groups, and results were compared. No significant differences were found between the two groups in all the evaluated parameters. It is concluded that in certain cases, with displacement of 2 - 4 mm, where a surgical approach is not feasible, reasonable spontaneous reduction and bone remodeling can occur. Meticulous follow-up is mandatory.
基金This project was sponsored by the Joint Earthquake Science Foundation under Contract No. 197007by the Doctoral Program Foundation of Institution of Higher Education, State Education Commission of China
文摘Seismic rupture produced by active faulting causes ground surface fracturing and seriously damages buildings.However,the fracture traces are usually indistinct or non-visible because of complicated deformations in Quaternary unconsolidated materials,so their upper parts can hardly be discovered on exploratory trenches.The aim of this paper is to study the types of fault rupture and displacement in different loose deposit beds from a joint view of mega-,meso-,and microscopic scales,and to find the mark and method for timing the palaeoseismic rupture on exploratory trenches.
文摘Objective To investigate the clinical outcome of humeral head replacement and individualized rehabilitation for displaced four-part fractures of proximal humerus,to provide clinical guideline of treating complicated fractures of
文摘AIM: To investigate the effect of early surgical intervention on the high surgical risk elderly patients who sustained femoral neck fracture(FNF) and taking concomitant antiplatelet agents. METHODS: Between 2010 and 2012, a prospective study was conducted on 49 geriatric patients, who took antiplatelet agents, sustained FNF and underwent surgery within 72 h [early surgery(ES) group], and these were compared with a retrospective consecutive case series of patients with similar characteristics(45 cases) who had delayed surgery(DS group) after 72 h during an earlier 3-year period. Postoperative outcomeswere followed for one year and compared. RESULTS: There were non-significant differences in perioperative blood loss, blood transfusion, intensive care unit requirement and postoperative mortality(P > 0.05 all). There were 2 patients(4%) in the DS group who died after surgery(P = 0.23). However, the ES group showed a significantly better postoperative outcome in terms of postoperative complications, length of hospital stay, and functional outcome(P < 0.05 all).CONCLUSION: Early hip surgery in geriatric hip fracture patients with ongoing antiplatelet treatment was not associated with a significant increase of perioperative blood loss and postoperative mortality. Moreover, ES resulted in a better postoperative surgical outcome. In early hip surgery protocol, the antiplatelet agents are discontinued and the patient is operated on within 72 h after admission, which is safe and effective for the medically fit patients.
文摘This letter reports a fully dynamic analysis of a moving defect with a plastic zone.The fields of stress and displacement of this defect are determined,so that the opening displacement at the tip of the defect is obtained.Based on it the author proposes a criterion of nonlinear dynamic fracture of solids.
基金Project supported by the National Research Foundation of Korea(2011-0030804)the Korea Research Foundation(KRF2009-0076450)funded by the Korea Government(MEST)
文摘Abstract： An effective approach was conducted for estimating fracture toughness using the crack opening displacement （COD） method for plasma enhanced chemical vapor deposition （PECVD） coating materials. For this evaluation, an elastoplastic analysis was used to estimate critical COD values for single edge notched bending （SENB） specimens. The relationship between fracture toughness （Kic） and critical COD for SENB specimens was obtained. Microstructure of the interface between AleO3-TiO2 composite ceramic coatings and AISI 1045 steel substrates was studied by using scanning electron microscope （SEM）. Chemical compositions were clarified by energy-dispersive X-ray spectroscopy （EDS）. The results show that the interface between of Al203-TiO2 and substrate has mechanical combining. The nanohardness of the coatings can reach 1 200 GPa examined by nanoindentation. The Klc was calculated according to this relationship from critical COD. The bending process produces a significant relationship of COD independent of the axial force applied. Fractographic analysis was conducted to determine the crack length. From the physical analysis of nanoindentation curves, the elastic modulus of 1045/AI2O3-TiO2 is 180 GPa for the 50 μm film. The highest value of fracture toughness for 1045/A1203-TiO2-250 μm is 348 MPa·mv2.
基金Project(50274074) supported by the National Nature Science Foundation of China Key Project(50490274) supported by the National Nature Science Foundation of China
文摘Subcritical crack growth of double torsion specimens made of ore, lherzolite, marble and granite was studied using Instron1342 type electro hydraulic servo test machine. The relations of the mode-I stress intensity factor KI versus the subcritical crack growth velocity v and the fracture toughness KIC were obtained by the double torsion constant displacement load relaxation method. The behavior of subcritical crack growth was analyzed for different rocks. The results show that lgKI—lgv relations of four kinds of rocks measured by this method accord with linear rule, i.e. the relations between subcritical crack growth velocity and stress intensity factor have a power law, which is in good agreement with CHARLES theory. lgKI—lgv curves move to top left corner with the decrease of the elastic modulus, which implies that the subcritical crack growth velocity speeds up. The maximum subcritical crack growth velocity exhibits negative exponential increase, and mode-I fracture toughness KIC decreases with the decrease of elastic modulus. The testing results provide a basis for time-dependence of rock engineering stability.
