Objective:To investigate the efficacy of montelukast sodium in the treatment of lung cancer patients with pulmonary infections.Methods:A total of 330 patients diagnosed with lung cancer and pulmonary infection,who wer...Objective:To investigate the efficacy of montelukast sodium in the treatment of lung cancer patients with pulmonary infections.Methods:A total of 330 patients diagnosed with lung cancer and pulmonary infection,who were admitted to the First Affiliated Hospital of Xi’an Medical University from 2020 to 2022,were selected as research subjects.They were randomly divided into two groups:a control group receiving conventional treatment and an observation group receiving conventional treatment combined with montelukast sodium.Each group consisted of 165 cases.The time required for clinical symptom improvement,the resolution of lung infection signs,and the levels of serum inflammatory factors before and after treatment were compared between the two groups.Results:The observation group exhibited significantly faster improvement in clinical symptoms compared to the control group(P<0.001).ELISA assays were conducted to detect the expression levels of IL-1β,IL-6,IL-8,and TNF-αin the serum of both groups at 1 week and 2 weeks into the treatment.The results indicated that,as the treatment progressed,the observation group displayed significantly lower levels of the four serum inflammatory factors compared to the control group(P<0.001).Conclusion:Montelukast sodium demonstrates efficacy in the treatment of patients with lung cancer complicated by pulmonary infections.These findings suggest its potential for further verification and clinical application.展开更多
Objective: To investigate the effects of montelukast sodium combined with budesonide on pulmonary function, inflammatory factors and immunoglobulin in children with asthma. Methods: A total of 100 children with asthma...Objective: To investigate the effects of montelukast sodium combined with budesonide on pulmonary function, inflammatory factors and immunoglobulin in children with asthma. Methods: A total of 100 children with asthma treated in our hospital from May 2013 to November 2016 were randomly divided into control group and observation group. In the control group, budesonide inhalation therapy was given. On the basis of the control group, montelukast sodium treatment was given, pulmonary function, inflammatory factors and immunoglobulin levels in the two groups before and after treatment were measured. Results:Compared with before treatment, the levels of FEV1%, FEF50%, FEF25% and PEF% in the two groups were significantly increased, those in the observation group were higher than in control group;compared with before treatment, IL-10 levels were significantly increased, TNF-α and IL-8 levels were significantly decreased in the two groups after treatment, moreover those in the observation group IL-10 levels were significantly higher than the control group, TNF-α and IL-8 were significantly lower than those in the control group, the difference was statistically significant;Compared with before treatment, IgA and IgM levels were significantly increased in both groups after treatment, IgE levels were significantly decreased, and IgA and IgM levels in the observation group were significantly higher than in the control group, IgE levels were significantly lower than the control group, the difference was statistically. Conclusion: Montelukast sodium combined with budesonide can effectively reduce the inflammation level of children with asthma, improve lung function, enhance immunity, the effect is significant, it is worth further clinical application.展开更多
A novel, precise, accurate, rapid and cost effective isocratic reverse-phase high performance liquid chromatographic (RP-HPLC) method was developed, optimized and validated for the simultaneous estimation of Monteluka...A novel, precise, accurate, rapid and cost effective isocratic reverse-phase high performance liquid chromatographic (RP-HPLC) method was developed, optimized and validated for the simultaneous estimation of Montelukast Sodium (MON) and Desloratadine (DES) in pharmaceutical dosage forms. The drugs were estimated using Hypersil BDS C18 (250 mm × 4.6 mm I.D., 5 μ particle size) column. The mobile phase composed of orthophosphoric acid and water in the ratio of 20:80 v/v, at a flow rate of 1.0 ml/min was used for the separation. Detection was carried out at 280 nm. The linearity range obtained was 10 - 30 μg/ml for MON and 5 - 15 μg/ml for DES with retention times of 2.929 min and 4.439 min for MON and DES respectively. The correlation coefficient values were found to be 0.999. Precision studies showed % RSD values less than 2% for both the drugs in all the selected concentrations. The percentage recoveries of MON and DES were in the range of 99.59% - 99.82% and 99.60% - 99.80% respectively. The limit of detection (LOD) and limit of quantification (LOQ) were 0.176 μg/ml, 0.587 μg/ml for MON and 0.087 μg/ml, 0.292 μg/ml for DES respectively. The method was validated as per the International Conference on Harmonization (ICH) guidelines. The proposed validated method was successfully used for the quantitative analysis of commercially available tablet dosage forms.展开更多
Objective: To explore the therapeutic effect of montelukast sodium + methylprednisolone+ azithromycin therapy for patients with mycoplasma pneumonia. Methods: A total of 88 patients with mycoplasma pneumonia who were ...Objective: To explore the therapeutic effect of montelukast sodium + methylprednisolone+ azithromycin therapy for patients with mycoplasma pneumonia. Methods: A total of 88 patients with mycoplasma pneumonia who were treated in our hospital between July 2015 and June 2017 were collected and divided into group A (oral azithromycin), group B (oral azithromycin + methylprednisolone), group C (oral azithromycin + montelukast sodium) and group D (oral montelukast sodium + methylprednisolone + azithromycin), and they were continuously treated for 1 week. The differences in therapeutic effect, systemic inflammatory response and stress response were compared among the four groups of patients. Results:After 1 week of treatment, the overall response rate of group D was higher than that of group A, group B and group C, and the overall response rate of group B and group C were higher than that of group A respectively;serum inflammatory factors C-reactive protein (CRP), interleukin-6 (IL-6), tumor necrosis factor α (TNF-α), cortisol (COR), malondialdehyde (MDA) and advanced oxidation protein product (AOPP) levels of group D were lower than those of group A, group B and group C, and serum CRP, IL-6, TNF-α, COR, MDA and AOPP levels of group B and group C were lower than those of group A respectively. Conclusion:Montelukast sodium + methylprednisolone + azithromycin therapy can significantly improve the therapeutic effect and inhibit the systemic inflammatory and stress response in patients with mycoplasma pneumonia.展开更多
Objective: To observe the effects of montelukast sodium combined with pidotimod on acute phase protein (APP) and indexes of immunologic function in pediatric acute bronchitis treatment. Methods: A total of 180 cases c...Objective: To observe the effects of montelukast sodium combined with pidotimod on acute phase protein (APP) and indexes of immunologic function in pediatric acute bronchitis treatment. Methods: A total of 180 cases children with acute bronchitis acted as research objects were randomly divided into control group (n=65) and observation group (n=63). On the basis of conventional therapy, control group was treated by plus pidotimod. On this base, observation group was treated with montelukast sodium. The changes of acute phase proteins (CRP, HP, a1-AAG and CER) and immune function (CD3+, CD4+, CD8+ and CD4+/CD8+) levels before and after treatment were observed after 2 months. Results: Before treatment, CRP, HP, a1-AAG, CER, CD3+, CD4+, CD8+ and CD4+/CD8+ levels of two groups had no statistically significant difference;CRP, HP, a1-AAG, CER, and CD8+ levels of control and observation groups decreased significantly after treatment, the decreases of observation group were more obvious than that of control group, and the levels after treatment were significantly lower than that of control groups. The levels of CD3+, CD4+ and CD4+/CD8+ in two groups after treatment were significantly higher than those before treatment. For observation group, the levels of CD3+, CD4+ and CD4+/CD8+ increased more significantly after treatment, which were significantly higher than that of the control group. Conclusion: Using Montelukast sodium combined with pidotimod can effectively reduce the children's acute phase protein levels, improve immune function, which has clinical value for the treatment of children with acute bronchitis.展开更多
BACKGROUND Montelukast or Singulair is a leukotriene receptor antagonist that reduces inflammation and relaxes the smooth muscles.It is known to be a safe and tolerable drug;nevertheless,it might be associated with se...BACKGROUND Montelukast or Singulair is a leukotriene receptor antagonist that reduces inflammation and relaxes the smooth muscles.It is known to be a safe and tolerable drug;nevertheless,it might be associated with several mild to severe adverse effects,one of which is dermatomyositis.Dermatomyositis is a rare acquired autoimmune myositis of unknown cause affecting adults and children.The literature has infrequently reported the association between dermatomyositis and montelukast use.CASE SUMMARY The current study reports a case of a 48-year-old black woman with a previous history of bronchial asthma and allergic rhinosinusitis who presented with typical signs and symptoms of dermatomyositis which were confirmed by investigations.Before developing dermatomyositis,the patient was prescribed montelukast for atopy and consumed the drug for five months.After administration of prednisolone,the patient had a significant improvement and is still being followed up.CONCLUSION Even though montelukast is widely used and believed to be a safe drug for managing several conditions,the present case report highlights the possibility of adverse effects of montelukast.Therefore,future studies with advanced study designs are highly recommended to investigate the association between dermatomyositis and montelukast use.展开更多
As a reducing salt,sodium sulfite could deprive oxygen in solution,which could mimic hypoxic stress in Caenorhabditis elegans.In this study,the wildtype Escherichia coli strain MG1655 was used to examine the inhibitio...As a reducing salt,sodium sulfite could deprive oxygen in solution,which could mimic hypoxic stress in Caenorhabditis elegans.In this study,the wildtype Escherichia coli strain MG1655 was used to examine the inhibition of sodium sulfite-induced hypoxia by observing the bacterial growth curves.展开更多
The purpose of this study was to identify and compare the degradation efficiencies of free and entrapped bacterial consortia(Staphylococcus capitis CP053957.1 and Achromobacter marplatensis MT078618.1)to different pol...The purpose of this study was to identify and compare the degradation efficiencies of free and entrapped bacterial consortia(Staphylococcus capitis CP053957.1 and Achromobacter marplatensis MT078618.1)to different polymers such as Sodium Alginate(SA),Sodium Alginate/Poly(Vinyl Alcohol)(SA/PVA),and Bushnell Haas Agar(BHA).In addition to SA and SA/PVA,which are cost-effective,non-toxic and have different functional groups,BHA,which is frequently encountered in laboratory-scale studies but has not been used as an entrapment material until now.Based on these,the polymers with different surface morphologies and chemical compositions were analyzed by SEM and FT-IR.While the petroleum removal efficiency was higher with the entrapped bacterial consortia than with the free one,BHA-entrapped bacterial consortium enhanced the petroleum removal more than SA and SA/PVA.Accordingly,the degradation rate of bacterial consortia entrapped with BHA was 2.039 day^(-1),SA/PVA was 1.560,SA was 0.993,the half-life period of BHA-entrapped bacterial consortia is quite low(t_(1/2)=0.339)compared with SA(t_(1/2)=0.444)and SA/PVA(t_(1/2)=0.697).The effects of the four main factors such as:amount of BHA(0.5,1,1.5,2,2.5,3 g),disc size(4,5,6,7,8 mm),inoculum concentration(1,2.5,5,7.5,10 mL),and incubation period on petroleum removal were also investigated.The maximum petroleum removal(94.5%)was obtained at≥2.5 mL of bacterial consortium entrapped in 2 g BHA with a 7 mm disc size at 168 h and the results were also confirmed by statistical analysis.Although a decrease was observed during the reuse of bacterial consortium entrapped in BHA,the petroleum removal was still above 50%at 10th cycle.Based on GC-MS analysis,the removal capacity of BHA-entrapped consortium was over 90%for short-chain n-alkanes and 80%for medium-chain n-alkanes.Overall,the obtained data are expected to provide a potential guideline in cleaning up the large-scale oil pollution in the future.Since there has been no similar study investigating petroleum removal with the bacterial consortia entrapped with BHA,this novel entrapment material can potentially be used in the treatment of petroleum pollution in advanced remediation studies.展开更多
A rapid, straightforward, sensitive, efficient, and cost-effective reverse-phase high-performance liquid chromatographic method was employed for the simultaneous determination of Sorbitol, Sodium Lactate, and Chloride...A rapid, straightforward, sensitive, efficient, and cost-effective reverse-phase high-performance liquid chromatographic method was employed for the simultaneous determination of Sorbitol, Sodium Lactate, and Chlorides in a drug solution for infusion. Sorbitol, Sodium lactate, and Chloride are all officially recognized in the USP monograph. Assay methods are provided through various techniques, with titrations being ineffective for trace-level quantification. Alternatively, IC, AAS, and ICP-MS, though highly accurate, are costly and often unavailable to most testing facilities. When considering methods, it’s important to prioritize both quality control requirements and user-friendly techniques. A simple HPLC simultaneous method was developed for the quantification of Chlorides, Sorbitol, and Sodium Lactate with a shorter run time. The separation utilized a Shimpack SCR-102(H) ion exclusion analytical column (7.9 mm × 300 mm, 7 μm), with a flow rate of 0.6 mL per min. The column compartment temperature was maintained at 40°C, and the injection volume was set at 10 μL, with detection at 200 nm. All measurements were conducted in a 0.1% solution of phosphoric acid. The analytical curves demonstrated linearity (r > 0.9999) in the concentration range of 0.79 to 3.8 mg per mL for Sodium Lactate (SL), 0.16 to 0.79 mg per mL for Sodium Chloride (SC), and 1.5 to 7.2 mg per mL for Sorbitol. Validation of the developed method followed the guidelines of the International Conference on Harmonization (ICH Q2B) and USP. The method exhibited precision, robustness, accuracy, and selectivity. In accelerated stability testing over 6 months, no significant variations were observed in organoleptic analysis and pH. Consequently, the developed method is deemed suitable for routine quality control analyses, enabling the simultaneous determination of Sodium Lactate, Sodium Chloride, and Sorbitol in pharmaceutical formulations and infusions.展开更多
The balance between cationic redox and oxygen redox in layer-structured cathode materials is an important issue for sodium batteries to obtain high energy density and considerable cycle stability.Oxygen redox can cont...The balance between cationic redox and oxygen redox in layer-structured cathode materials is an important issue for sodium batteries to obtain high energy density and considerable cycle stability.Oxygen redox can contribute extra capacity to increase energy density,but results in lattice instability and capacity fading caused by lattice oxygen gliding and oxygen release.In this work,reversible Mn^(2+)/Mn^(4+)redox is realized in a P3-Na_(0.65)Li_(0.2)Co_(0.05)Mn_(0.75)O_(2)cathode material with high specific capacity and structure stability via Co substitution.The contribution of oxygen redox is suppressed significantly by reversible Mn^(2+)/Mn^(4+)redox without sacrificing capacity,thus reducing lattice oxygen release and improving the structure stability.Synchrotron X-ray techniques reveal that P3 phase is well maintained in a wide voltage window of 1.5-4.5 V vs.Na^(+)/Na even at 10 C and after long-term cycling.It is disclosed that charge compensation from Co/Mn-ions contributes to the voltage region below 4.2 V and O-ions contribute to the whole voltage range.The synergistic contributions of Mn^(2+)/Mn^(4+),Co^(2+)/Co^(3+),and O^(2-)/(O_n)^(2-)redox in P3-Na_(0.65)Li_(0.2)Co_(0.05)Mn_(0.75)O_(2)lead to a high reversible capacity of 215.0 m A h g^(-1)at 0.1 C with considerable cycle stability.The strategy opens up new opportunities for the design of high capacity cathode materials for rechargeable batteries.展开更多
Internal curing agents (ICA) based on super absorbent polymer have poor alkali tolerance and reduce the early strength of concrete.An alkali tolerate internal curing agent (CAA-ICA) was designed and prepared by using ...Internal curing agents (ICA) based on super absorbent polymer have poor alkali tolerance and reduce the early strength of concrete.An alkali tolerate internal curing agent (CAA-ICA) was designed and prepared by using sodium carboxymethyl starch (CMS) with high hydrophilicity,acrylic acid (AA) containing anionic carboxylic group and acrylamide (AM) containing non-ionic amide group as the main raw materials.The results show that the ratio of CAA-ICA alkali absorption solution is higher than that existing ICA,which solves the low water absorption ratio of the ICA in alkali environment.The water absorption ratio of CAA-ICA in saturated Ca(OH)_(2) solution is 95.8 g·g^(-1),and the alkali tolerance coefficient is 3.4.The application of CAA-ICA in cement-based materials can increase the internal relative humidity and miniaturize the pore structure.The compressive strength of mortar increases up to 12.95%at 28 d,which provids a solution to overcome the reduction of the early strength.展开更多
The Mn-based oxide cathode with enriched crystal phase structure and component diversity can provide the excellent chemistry structure for Na-ion batteries.Nevertheless,the broad application prospect is obstructed by ...The Mn-based oxide cathode with enriched crystal phase structure and component diversity can provide the excellent chemistry structure for Na-ion batteries.Nevertheless,the broad application prospect is obstructed by the sluggish Na^(+)kinetics and the phase transitions upon cycling.Herein,we establish the thermodynamically stable phase diagram of various Mn-based oxide composites precisely controlled by sodium content tailoring strategy coupling with co-doping and solid-state reaction.The chemical environment of the P2/P'3 and P2/P3 biphasic composites indicate that the charge compensation mechanism stems from the cooperative contribution of anions and cations.Benefiting from the no phase transition to scavenge the structure strain,P2/P'3 electrode can deliver long cycling stability(capacity retention of 73.8%after 1000 cycles at 10 C)and outstanding rate properties(the discharge capacity of 84.08 mA h g^(-1)at 20 C)than P2/P3 electrode.Furthermore,the DFT calculation demonstrates that the introducing novel P'3 phase can significantly regulate the Na^(+)reaction dynamics and modify the local electron configuration of Mn.The effective phase engineering can provide a reference for designing other high-performance electrode materials for Na-ion batteries.展开更多
The preparation process of sodium molybdate has the disadvantages of high energy consumption,low thermal efficiency,and high raw material requirement of molybdenum trioxide,in order to realize the green and efficient ...The preparation process of sodium molybdate has the disadvantages of high energy consumption,low thermal efficiency,and high raw material requirement of molybdenum trioxide,in order to realize the green and efficient development of molybdenum concentrate resources,this paper proposes a new process for efficient recovery of molybdenum from molybdenum concentrate and preparation of sodium molybdate by microwave-enhanced roasting and alkali leaching.Thermodynamic analysis indicated the feasibility of oxidation roasting of molybdenum concentrate.The effects of roasting temperature,holding time,and power-to-mass ratio on the oxidation product and leaching product sodium molybdate (Na_(2)MoO_(4)·2H_(2)O) were investigated.Under the optimal process conditions:roasting temperature of 700℃,holding time of 110 min,and power-to-mass ratio of 110 W/g,the molybdenum state of existence was converted from MoS_(2) to Mo O3.The process of preparing sodium molybdate by alkali leaching of molybdenum calcine was investigated,the optimal leaching conditions include a solution concentration of 2.5 mol/L,a liquid-to-solid ratio of 2 mL/g,a leaching temperature of 60℃,and leaching solution termination at pH 8.The optimum conditions result in a leaching rate of sodium molybdate of 96.24%.Meanwhile,the content of sodium molybdate reaches 94.08wt%after leaching and removing impurities.Iron and aluminum impurities can be effectively separated by adjusting the pH of the leaching solution with sodium carbonate solution.This research avoids the shortcomings of the traditional process and utilizes the advantages of microwave metallurgy to prepare high-quality sodium molybdate,which provides a new idea for the highvalue utilization of molybdenum concentrate.展开更多
Sodium alginate(SA)/chitosan(CH)polyelectrolyte scaffold is a suitable substrate for tissue-engineering application.The present study deals with further improvement in the tensile strength and biological properties of...Sodium alginate(SA)/chitosan(CH)polyelectrolyte scaffold is a suitable substrate for tissue-engineering application.The present study deals with further improvement in the tensile strength and biological properties of this type of scaffold to make it a potential template for bone-tissue regeneration.We experimented with adding 0%–15%(volume fraction)gelatin(GE),a protein-based biopolymer known to promote cell adhesion,proliferation,and differentiation.The resulting tri-polymer complex was used as bioink to fabricate SA/CH/GEmatrices by three-dimensional(3D)printing.Morphological studies using scanning electron microscopy revealed the microfibrous porous architecture of all the structures,which had a pore size range of 383–419μm.X-ray diffraction and Fourier-transform infrared spectroscopy analyses revealed the amorphous nature of the scaffold and the strong electrostatic interactions among the functional groups of the polymers,thereby forming polyelectrolyte complexes which were found to improve mechanical properties and structural stability.The scaffolds exhibited a desirable degradation rate,controlled swelling,and hydrophilic characteristics which are favorable for bone-tissue engineering.The tensile strength improved from(386±15)to(693±15)kPa due to the increased stiffness of SA/CH scaffolds upon addition of gelatin.The enhanced protein adsorption and in vitro bioactivity(forming an apatite layer)confirmed the ability of the SA/CH/GE scaffold to offer higher cellular adhesion and a bone-like environment to cells during the process of tissue regeneration.In vitro biological evaluation including the MTT assay,confocal microscopy analysis,and alizarin red S assay showed a significant increase in cell attachment,cell viability,and cell proliferation,which further improved biomineralization over the scaffold surface.In addition,SA/CH containing 15%gelatin designated as SA/CH/GE15 showed superior performance to the other fabricated 3D structures,demonstrating its potential for use in bone-tissue engineering.展开更多
Inflammatory bowel disease(IBD)is a complex relapsing inflammatory disease in the gut and is driven by complicated host-gut microbiome interactions.Gut commensals have shown different functions in IBD prevention and t...Inflammatory bowel disease(IBD)is a complex relapsing inflammatory disease in the gut and is driven by complicated host-gut microbiome interactions.Gut commensals have shown different functions in IBD prevention and treatment.To gain a mechanistic understanding of how different commensals affect intestinal inflammation,we compared the protective effects of 6 probiotics(belonging to the genera Akkermansia,Bifidobacterium,Clostridium,and Enterococcus)on dextran sulfate sodium(DSS)-induced colitis in mice with or without gut microbiota.Anti-inflammatory properties(ratio of interleukin(IL)-10 and IL-12)of these strains were also evaluated in an in vitro mesenteric lymph nodes(MLN)co-culture system.Results showed that 4 probiotics(belonging to the species Bifidobacterium breve,Bifidobacterium bifidum,and Enterococcus faecalis)can alleviate colitis in normal mice.The probiotic strains differed in regulating the intestinal microbiota,cytokines(IL-10,IL-1βand interferon(IFN)-γ),and tight junction function(Zonulin-1 and Occludin).By constrast,Akkermansia muciniphila AH39 and Clostridium butyricum FHuNHHMY49T1 were not protective.Interestingly,B.breve JSNJJNM2 with high anti-inflammatory potential in the MLN model could relieve colitis symptoms in antibiotic cocktail(Abx)-treated mice.Meanwhile,E.faecalis FJSWX25M1induced low levels of cytokines in vitro and showed no beneficial effects.Therefore,we provided insight into the clinical application of probiotics in IBD treatment.展开更多
Planar Na ion micro-supercapacitors(NIMSCs) that offer both high energy density and power density are deemed to a promising class of miniaturized power sources for wearable and portable microelectron-ics. Nevertheless...Planar Na ion micro-supercapacitors(NIMSCs) that offer both high energy density and power density are deemed to a promising class of miniaturized power sources for wearable and portable microelectron-ics. Nevertheless, the development of NIMSCs are hugely impeded by the low capacity and sluggish Na ion kinetics in the negative electrode.Herein, we demonstrate a novel carbon-coated Nb_(2)O_5 microflower with a hierarchical structure composed of vertically intercrossed and porous nanosheets, boosting Na ion storage performance. The unique structural merits, including uniform carbon coating, ultrathin nanosheets and abun-dant pores, endow the Nb_(2)O_5 microflower with highly reversible Na ion storage capacity of 245 mAh g^(-1) at 0.25 C and excellent rate capability.Benefiting from high capacity and fast charging of Nb_(2)O_5 microflower, the planar NIMSCs consisted of Nb_(2)O_5 negative electrode and activated car-bon positive electrode deliver high areal energy density of 60.7 μWh cm^(-2),considerable voltage window of 3.5 V and extraordinary cyclability. Therefore, this work exploits a structural design strategy towards electrode materials for application in NIMSCs, holding great promise for flexible microelectronics.展开更多
Amaranthus retroflexus L. is a serious and widespread malignant weed in soybean fields in Heilongjiang Province. Exploring the dormancy characteristics of A. retroflexus L. seeds and the physiological response of its ...Amaranthus retroflexus L. is a serious and widespread malignant weed in soybean fields in Heilongjiang Province. Exploring the dormancy characteristics of A. retroflexus L. seeds and the physiological response of its seedlings to acifluorfen sodium can provide a basis for further researches on its resistance mechanism. Using newly harvested and stored A. retroflexus L. seeds for one year as experimental materials, the effects of different concentrations of HCl, NaOH, water temperature, gibberellic acid(GA) and polyethylene glycol(PEG) on the dormancy and germination of A. retroflexus L. seeds were studied. The sensitivity of A. retroflexus L.to acifluorfen sodium was determined using bioassay. The effects on leaf chlorophyll content and target enzyme activity were studied at a normal dosage of 360 g a.i. hm^(-2) and a doubling dosage of 720 g a.i. hm^(-2) of acifluorfen sodium. Newly harvested seeds exhibiting dormancy were soaked in water of various temperatures and in different concentrations of NaOH and HCl, which were ineffective in breaking the seed dormancy. GA could break seed dormancy, and the highest seed germination rate reached 93.33% when they were soaked at 3 000 mg·L^(-1) for 72 h and 4 000 mg·L^(-1) for 48 h. The drought stress was simulated with a 15%-25% polyethylene glycol solution, which had no significant effect on the seed germination rate. The GR_(50) value of acifluorfen sodium for A. retroflexus L. was 705.7 g a.i. hm^(-2), which was 1.96 times the recommended dose in the field. After the application of different doses of acifluorfen sodium, the chlorophyll content of A. retroflexus L. reached its minimum value 3 days after treatment(DAT), and then gradually increased. The activity of the target enzyme protoporphyrinogen oxidase(PPO) reached the highest value at 7 DAT under different dosages, and gradually returned to normal levels thereafter. Soaking with gibberellin was an effective method to break seed dormancy. A. retroflexus L. seeds had certain drought resistance during the germination process. A. retroflexus L. was not sensitive to acifluorfen sodium and acifluorfen sodium ether, and could not effectively inhibit the PPO activity, indicating that A. retroflexus L. had target resistance to acifluorfen sodium.展开更多
Constructing heterostructure is considered as an effective strategy to address the sluggish electronic and ionic kinetics of anode materials for sodium ion batteries(SIBs).However,realizing the orientated growth and u...Constructing heterostructure is considered as an effective strategy to address the sluggish electronic and ionic kinetics of anode materials for sodium ion batteries(SIBs).However,realizing the orientated growth and uniform distribution of the heterostructure is still a great challenge.Herein,the regulated novel CoSe_(2)/NiSe_(2)heterostructure confined in N-doped carbon nanofibers(CoSe_(2)/NiSe_(2)@N-C)are prepared by using Co/Ni-ZIF template,in which,the CoSe_(2)/NiSe_(2)heterostructures realize uniform distribution on a micro level.Benefiting from the unique heterostructure and N-doped carbon nanofibers,the CoSe_(2)/NiSe_(2)@N-C deliveries superior rate capability and durable cycle lifespan with a reversible capacity of 400.5 mA h g^(-1)after 5000 cycles at 2 A g^(-1).The Na-ion full battery with CoSe_(2)/NiSe_(2)@N-C anode and layered oxide cathode displays a remarkable energy density of 563 W h kg^(-1)with 241.1 W kg^(-1)at 0.1 A g^(-1).The theoretical calculations disclose that the periodic and directional built-in electric-field along with the heterointerfaces of CoSe_(2)/NiSe_(2)@N-C can accelerate electrochemical reaction kinetics.The in(ex)situ experimental measurements reveal the reversible conversion reaction and stable structure of CoSe_(2)/NiSe_(2)@N-C during Na+insertion/extraction.The study highlights the potential ability of precisely controlled heterostructure to stimulate the electrochemical performances of advanced anode for SIBs.展开更多
BACKGROUND Sodium glucose cotransporter-2 inhibitors(SGLT-2i)are a class of drugs with modest antidiabetic efficacy,weight loss effect,and cardiovascular benefits as proven by multiple randomised controlled trials(RCT...BACKGROUND Sodium glucose cotransporter-2 inhibitors(SGLT-2i)are a class of drugs with modest antidiabetic efficacy,weight loss effect,and cardiovascular benefits as proven by multiple randomised controlled trials(RCTs).However,real-world data on the comparative efficacy and safety of individual SGLT-2i medications is sparse.AIM To study the comparative efficacy and safety of SGLT-2i using real-world clinical data.METHODS We evaluated the comparative efficacy data of 3 SGLT-2i drugs(dapagliflozin,canagliflozin,and empagliflozin)used for treating patients with type 2 diabetes mellitus.Data on the reduction of glycated hemoglobin(HbA1c),body weight,blood pressure(BP),urine albumin creatinine ratio(ACR),and adverse effects were recorded retrospectively.RESULTS Data from 467 patients with a median age of 64(14.8)years,294(62.96%)males and 375(80.5%)Caucasians were analysed.Median diabetes duration was 16.0(9.0)years,and the duration of SGLT-2i use was 3.6(2.1)years.SGLT-2i molecules used were dapagliflozin 10 mg(n=227;48.6%),canagliflozin 300 mg(n=160;34.3%),and empagliflozin 25 mg(n=80;17.1).Baseline median(interquartile range)HbA1c in mmol/mol were:dapagliflozin-78.0(25.3),canagliflozin-80.0(25.5),and empagliflozin-75.0(23.5)respectively.The respective median HbA1c reduction at 12 months and the latest review(just prior to the study)were:66.5(22.8)&69.0(24.0),67.0(16.3)&66.0(28.0),and 67.0(22.5)&66.5(25.8)respectively(P<0.001 for all comparisons from baseline).Significant improvements in body weight(in kilograms)from baseline to study end were noticed with dapagliflozin-101(29.5)to 92.2(25.6),and canagliflozin 100(28.3)to 95.3(27.5)only.Significant reductions in median systolic and diastolic BP,from 144(21)mmHg to 139(23)mmHg;(P=0.015),and from 82(16)mmHg to 78(19)mmHg;(P<0.001)respectively were also observed.A significant reduction of microalbuminuria was observed with canagliflozin only[ACR 14.6(42.6)at baseline to 8.9(23.7)at the study end;P=0.043].Adverse effects of SGLT-2i were as follows:genital thrush and urinary infection-20(8.8%)&17(7.5%)with dapagliflozin;9(5.6%)&5(3.13%)with canagliflozin;and 4(5%)&4(5%)with empagliflozin.Diabetic ketoacidosis was observed in 4(1.8%)with dapagliflozin and 1(0.63%)with canagliflozin.CONCLUSION Treatment of patients with SGLT-2i is associated with statistically significant reductions in HbA1c,body weight,and better than those reported in RCTs,with low side effect profiles.A review of large-scale real-world data is needed to inform better clinical practice decision making.展开更多
Foam stability tests were performed using sodium dodecyl sulfate(SDS)surfactant and SiO2 nanoparticles as foaming system at different asphaltene concentrations,and the half-life of CO_(2) foam was measured.The mechani...Foam stability tests were performed using sodium dodecyl sulfate(SDS)surfactant and SiO2 nanoparticles as foaming system at different asphaltene concentrations,and the half-life of CO_(2) foam was measured.The mechanism of foam stability reduction in the presence of asphaltene was analyzed by scanning electron microscope(SEM),UV adsorption spectrophotometric concentration measurement and Zeta potential measurement.When the mass ratio of synthetic oil to foam-formation suspension was 1:9 and the asphaltene mass fraction increased from 0 to 15%,the half-life of SDS-stabilized foams decreased from 751 s to 239 s,and the half-life of SDS/silica-stabilized foams decreased from 912 s to 298 s.When the mass ratio of synthetic oil to foam-formation suspension was 2:8 and the asphaltene mass fraction increased from 0 to 15%,the half-life of SDS-stabilized foams decreased from 526 s to 171 s,and the half-life of SDS/silica-stabilized foams decreased from 660 s to 205 s.In addition,due to asphaltene-SDS/silica interaction in the aqueous phase,the absolute value of Zeta potential decreases,and the surface charges of particles reduce,leading to the reduction of repulsive forces between two interfaces of thin liquid film,which in turn,damages the foam stability.展开更多
文摘Objective:To investigate the efficacy of montelukast sodium in the treatment of lung cancer patients with pulmonary infections.Methods:A total of 330 patients diagnosed with lung cancer and pulmonary infection,who were admitted to the First Affiliated Hospital of Xi’an Medical University from 2020 to 2022,were selected as research subjects.They were randomly divided into two groups:a control group receiving conventional treatment and an observation group receiving conventional treatment combined with montelukast sodium.Each group consisted of 165 cases.The time required for clinical symptom improvement,the resolution of lung infection signs,and the levels of serum inflammatory factors before and after treatment were compared between the two groups.Results:The observation group exhibited significantly faster improvement in clinical symptoms compared to the control group(P<0.001).ELISA assays were conducted to detect the expression levels of IL-1β,IL-6,IL-8,and TNF-αin the serum of both groups at 1 week and 2 weeks into the treatment.The results indicated that,as the treatment progressed,the observation group displayed significantly lower levels of the four serum inflammatory factors compared to the control group(P<0.001).Conclusion:Montelukast sodium demonstrates efficacy in the treatment of patients with lung cancer complicated by pulmonary infections.These findings suggest its potential for further verification and clinical application.
文摘Objective: To investigate the effects of montelukast sodium combined with budesonide on pulmonary function, inflammatory factors and immunoglobulin in children with asthma. Methods: A total of 100 children with asthma treated in our hospital from May 2013 to November 2016 were randomly divided into control group and observation group. In the control group, budesonide inhalation therapy was given. On the basis of the control group, montelukast sodium treatment was given, pulmonary function, inflammatory factors and immunoglobulin levels in the two groups before and after treatment were measured. Results:Compared with before treatment, the levels of FEV1%, FEF50%, FEF25% and PEF% in the two groups were significantly increased, those in the observation group were higher than in control group;compared with before treatment, IL-10 levels were significantly increased, TNF-α and IL-8 levels were significantly decreased in the two groups after treatment, moreover those in the observation group IL-10 levels were significantly higher than the control group, TNF-α and IL-8 were significantly lower than those in the control group, the difference was statistically significant;Compared with before treatment, IgA and IgM levels were significantly increased in both groups after treatment, IgE levels were significantly decreased, and IgA and IgM levels in the observation group were significantly higher than in the control group, IgE levels were significantly lower than the control group, the difference was statistically. Conclusion: Montelukast sodium combined with budesonide can effectively reduce the inflammation level of children with asthma, improve lung function, enhance immunity, the effect is significant, it is worth further clinical application.
文摘A novel, precise, accurate, rapid and cost effective isocratic reverse-phase high performance liquid chromatographic (RP-HPLC) method was developed, optimized and validated for the simultaneous estimation of Montelukast Sodium (MON) and Desloratadine (DES) in pharmaceutical dosage forms. The drugs were estimated using Hypersil BDS C18 (250 mm × 4.6 mm I.D., 5 μ particle size) column. The mobile phase composed of orthophosphoric acid and water in the ratio of 20:80 v/v, at a flow rate of 1.0 ml/min was used for the separation. Detection was carried out at 280 nm. The linearity range obtained was 10 - 30 μg/ml for MON and 5 - 15 μg/ml for DES with retention times of 2.929 min and 4.439 min for MON and DES respectively. The correlation coefficient values were found to be 0.999. Precision studies showed % RSD values less than 2% for both the drugs in all the selected concentrations. The percentage recoveries of MON and DES were in the range of 99.59% - 99.82% and 99.60% - 99.80% respectively. The limit of detection (LOD) and limit of quantification (LOQ) were 0.176 μg/ml, 0.587 μg/ml for MON and 0.087 μg/ml, 0.292 μg/ml for DES respectively. The method was validated as per the International Conference on Harmonization (ICH) guidelines. The proposed validated method was successfully used for the quantitative analysis of commercially available tablet dosage forms.
文摘Objective: To explore the therapeutic effect of montelukast sodium + methylprednisolone+ azithromycin therapy for patients with mycoplasma pneumonia. Methods: A total of 88 patients with mycoplasma pneumonia who were treated in our hospital between July 2015 and June 2017 were collected and divided into group A (oral azithromycin), group B (oral azithromycin + methylprednisolone), group C (oral azithromycin + montelukast sodium) and group D (oral montelukast sodium + methylprednisolone + azithromycin), and they were continuously treated for 1 week. The differences in therapeutic effect, systemic inflammatory response and stress response were compared among the four groups of patients. Results:After 1 week of treatment, the overall response rate of group D was higher than that of group A, group B and group C, and the overall response rate of group B and group C were higher than that of group A respectively;serum inflammatory factors C-reactive protein (CRP), interleukin-6 (IL-6), tumor necrosis factor α (TNF-α), cortisol (COR), malondialdehyde (MDA) and advanced oxidation protein product (AOPP) levels of group D were lower than those of group A, group B and group C, and serum CRP, IL-6, TNF-α, COR, MDA and AOPP levels of group B and group C were lower than those of group A respectively. Conclusion:Montelukast sodium + methylprednisolone + azithromycin therapy can significantly improve the therapeutic effect and inhibit the systemic inflammatory and stress response in patients with mycoplasma pneumonia.
文摘Objective: To observe the effects of montelukast sodium combined with pidotimod on acute phase protein (APP) and indexes of immunologic function in pediatric acute bronchitis treatment. Methods: A total of 180 cases children with acute bronchitis acted as research objects were randomly divided into control group (n=65) and observation group (n=63). On the basis of conventional therapy, control group was treated by plus pidotimod. On this base, observation group was treated with montelukast sodium. The changes of acute phase proteins (CRP, HP, a1-AAG and CER) and immune function (CD3+, CD4+, CD8+ and CD4+/CD8+) levels before and after treatment were observed after 2 months. Results: Before treatment, CRP, HP, a1-AAG, CER, CD3+, CD4+, CD8+ and CD4+/CD8+ levels of two groups had no statistically significant difference;CRP, HP, a1-AAG, CER, and CD8+ levels of control and observation groups decreased significantly after treatment, the decreases of observation group were more obvious than that of control group, and the levels after treatment were significantly lower than that of control groups. The levels of CD3+, CD4+ and CD4+/CD8+ in two groups after treatment were significantly higher than those before treatment. For observation group, the levels of CD3+, CD4+ and CD4+/CD8+ increased more significantly after treatment, which were significantly higher than that of the control group. Conclusion: Using Montelukast sodium combined with pidotimod can effectively reduce the children's acute phase protein levels, improve immune function, which has clinical value for the treatment of children with acute bronchitis.
文摘BACKGROUND Montelukast or Singulair is a leukotriene receptor antagonist that reduces inflammation and relaxes the smooth muscles.It is known to be a safe and tolerable drug;nevertheless,it might be associated with several mild to severe adverse effects,one of which is dermatomyositis.Dermatomyositis is a rare acquired autoimmune myositis of unknown cause affecting adults and children.The literature has infrequently reported the association between dermatomyositis and montelukast use.CASE SUMMARY The current study reports a case of a 48-year-old black woman with a previous history of bronchial asthma and allergic rhinosinusitis who presented with typical signs and symptoms of dermatomyositis which were confirmed by investigations.Before developing dermatomyositis,the patient was prescribed montelukast for atopy and consumed the drug for five months.After administration of prednisolone,the patient had a significant improvement and is still being followed up.CONCLUSION Even though montelukast is widely used and believed to be a safe drug for managing several conditions,the present case report highlights the possibility of adverse effects of montelukast.Therefore,future studies with advanced study designs are highly recommended to investigate the association between dermatomyositis and montelukast use.
基金supported by the Air Force Characteristic Medical Center Youth Talent Program 22YXQN020。
文摘As a reducing salt,sodium sulfite could deprive oxygen in solution,which could mimic hypoxic stress in Caenorhabditis elegans.In this study,the wildtype Escherichia coli strain MG1655 was used to examine the inhibition of sodium sulfite-induced hypoxia by observing the bacterial growth curves.
文摘The purpose of this study was to identify and compare the degradation efficiencies of free and entrapped bacterial consortia(Staphylococcus capitis CP053957.1 and Achromobacter marplatensis MT078618.1)to different polymers such as Sodium Alginate(SA),Sodium Alginate/Poly(Vinyl Alcohol)(SA/PVA),and Bushnell Haas Agar(BHA).In addition to SA and SA/PVA,which are cost-effective,non-toxic and have different functional groups,BHA,which is frequently encountered in laboratory-scale studies but has not been used as an entrapment material until now.Based on these,the polymers with different surface morphologies and chemical compositions were analyzed by SEM and FT-IR.While the petroleum removal efficiency was higher with the entrapped bacterial consortia than with the free one,BHA-entrapped bacterial consortium enhanced the petroleum removal more than SA and SA/PVA.Accordingly,the degradation rate of bacterial consortia entrapped with BHA was 2.039 day^(-1),SA/PVA was 1.560,SA was 0.993,the half-life period of BHA-entrapped bacterial consortia is quite low(t_(1/2)=0.339)compared with SA(t_(1/2)=0.444)and SA/PVA(t_(1/2)=0.697).The effects of the four main factors such as:amount of BHA(0.5,1,1.5,2,2.5,3 g),disc size(4,5,6,7,8 mm),inoculum concentration(1,2.5,5,7.5,10 mL),and incubation period on petroleum removal were also investigated.The maximum petroleum removal(94.5%)was obtained at≥2.5 mL of bacterial consortium entrapped in 2 g BHA with a 7 mm disc size at 168 h and the results were also confirmed by statistical analysis.Although a decrease was observed during the reuse of bacterial consortium entrapped in BHA,the petroleum removal was still above 50%at 10th cycle.Based on GC-MS analysis,the removal capacity of BHA-entrapped consortium was over 90%for short-chain n-alkanes and 80%for medium-chain n-alkanes.Overall,the obtained data are expected to provide a potential guideline in cleaning up the large-scale oil pollution in the future.Since there has been no similar study investigating petroleum removal with the bacterial consortia entrapped with BHA,this novel entrapment material can potentially be used in the treatment of petroleum pollution in advanced remediation studies.
文摘A rapid, straightforward, sensitive, efficient, and cost-effective reverse-phase high-performance liquid chromatographic method was employed for the simultaneous determination of Sorbitol, Sodium Lactate, and Chlorides in a drug solution for infusion. Sorbitol, Sodium lactate, and Chloride are all officially recognized in the USP monograph. Assay methods are provided through various techniques, with titrations being ineffective for trace-level quantification. Alternatively, IC, AAS, and ICP-MS, though highly accurate, are costly and often unavailable to most testing facilities. When considering methods, it’s important to prioritize both quality control requirements and user-friendly techniques. A simple HPLC simultaneous method was developed for the quantification of Chlorides, Sorbitol, and Sodium Lactate with a shorter run time. The separation utilized a Shimpack SCR-102(H) ion exclusion analytical column (7.9 mm × 300 mm, 7 μm), with a flow rate of 0.6 mL per min. The column compartment temperature was maintained at 40°C, and the injection volume was set at 10 μL, with detection at 200 nm. All measurements were conducted in a 0.1% solution of phosphoric acid. The analytical curves demonstrated linearity (r > 0.9999) in the concentration range of 0.79 to 3.8 mg per mL for Sodium Lactate (SL), 0.16 to 0.79 mg per mL for Sodium Chloride (SC), and 1.5 to 7.2 mg per mL for Sorbitol. Validation of the developed method followed the guidelines of the International Conference on Harmonization (ICH Q2B) and USP. The method exhibited precision, robustness, accuracy, and selectivity. In accelerated stability testing over 6 months, no significant variations were observed in organoleptic analysis and pH. Consequently, the developed method is deemed suitable for routine quality control analyses, enabling the simultaneous determination of Sodium Lactate, Sodium Chloride, and Sorbitol in pharmaceutical formulations and infusions.
基金financially supported by the National Key Scientific Research Project(2022YFB2502300)China and the National Natural Science Foundation of China(52071085)。
文摘The balance between cationic redox and oxygen redox in layer-structured cathode materials is an important issue for sodium batteries to obtain high energy density and considerable cycle stability.Oxygen redox can contribute extra capacity to increase energy density,but results in lattice instability and capacity fading caused by lattice oxygen gliding and oxygen release.In this work,reversible Mn^(2+)/Mn^(4+)redox is realized in a P3-Na_(0.65)Li_(0.2)Co_(0.05)Mn_(0.75)O_(2)cathode material with high specific capacity and structure stability via Co substitution.The contribution of oxygen redox is suppressed significantly by reversible Mn^(2+)/Mn^(4+)redox without sacrificing capacity,thus reducing lattice oxygen release and improving the structure stability.Synchrotron X-ray techniques reveal that P3 phase is well maintained in a wide voltage window of 1.5-4.5 V vs.Na^(+)/Na even at 10 C and after long-term cycling.It is disclosed that charge compensation from Co/Mn-ions contributes to the voltage region below 4.2 V and O-ions contribute to the whole voltage range.The synergistic contributions of Mn^(2+)/Mn^(4+),Co^(2+)/Co^(3+),and O^(2-)/(O_n)^(2-)redox in P3-Na_(0.65)Li_(0.2)Co_(0.05)Mn_(0.75)O_(2)lead to a high reversible capacity of 215.0 m A h g^(-1)at 0.1 C with considerable cycle stability.The strategy opens up new opportunities for the design of high capacity cathode materials for rechargeable batteries.
基金Funded by the National Key Research and Development Program of China (No.2019YFC1906202)the Guangxi Key Research and Development Plan (Nos.Guike AA18242007-3, Guike AB19259008, and Guike AB20297014)。
文摘Internal curing agents (ICA) based on super absorbent polymer have poor alkali tolerance and reduce the early strength of concrete.An alkali tolerate internal curing agent (CAA-ICA) was designed and prepared by using sodium carboxymethyl starch (CMS) with high hydrophilicity,acrylic acid (AA) containing anionic carboxylic group and acrylamide (AM) containing non-ionic amide group as the main raw materials.The results show that the ratio of CAA-ICA alkali absorption solution is higher than that existing ICA,which solves the low water absorption ratio of the ICA in alkali environment.The water absorption ratio of CAA-ICA in saturated Ca(OH)_(2) solution is 95.8 g·g^(-1),and the alkali tolerance coefficient is 3.4.The application of CAA-ICA in cement-based materials can increase the internal relative humidity and miniaturize the pore structure.The compressive strength of mortar increases up to 12.95%at 28 d,which provids a solution to overcome the reduction of the early strength.
基金supported by the National Natural Science Foundation of China (52173273)Fundamental Research Funds for the Central Universities (2022CX11013)+2 种基金Shanxi Province Science Foundation for Youths (No.202203021212391)the Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi (No.2022L253)Institute Foundation Project of China Academy of Railway Sciences Corporation Limited Metals and Chemistry Research Institute (No.2023SJ02)。
文摘The Mn-based oxide cathode with enriched crystal phase structure and component diversity can provide the excellent chemistry structure for Na-ion batteries.Nevertheless,the broad application prospect is obstructed by the sluggish Na^(+)kinetics and the phase transitions upon cycling.Herein,we establish the thermodynamically stable phase diagram of various Mn-based oxide composites precisely controlled by sodium content tailoring strategy coupling with co-doping and solid-state reaction.The chemical environment of the P2/P'3 and P2/P3 biphasic composites indicate that the charge compensation mechanism stems from the cooperative contribution of anions and cations.Benefiting from the no phase transition to scavenge the structure strain,P2/P'3 electrode can deliver long cycling stability(capacity retention of 73.8%after 1000 cycles at 10 C)and outstanding rate properties(the discharge capacity of 84.08 mA h g^(-1)at 20 C)than P2/P3 electrode.Furthermore,the DFT calculation demonstrates that the introducing novel P'3 phase can significantly regulate the Na^(+)reaction dynamics and modify the local electron configuration of Mn.The effective phase engineering can provide a reference for designing other high-performance electrode materials for Na-ion batteries.
基金financially supported by the National Natural Science Foundation of China (No.51964046)。
文摘The preparation process of sodium molybdate has the disadvantages of high energy consumption,low thermal efficiency,and high raw material requirement of molybdenum trioxide,in order to realize the green and efficient development of molybdenum concentrate resources,this paper proposes a new process for efficient recovery of molybdenum from molybdenum concentrate and preparation of sodium molybdate by microwave-enhanced roasting and alkali leaching.Thermodynamic analysis indicated the feasibility of oxidation roasting of molybdenum concentrate.The effects of roasting temperature,holding time,and power-to-mass ratio on the oxidation product and leaching product sodium molybdate (Na_(2)MoO_(4)·2H_(2)O) were investigated.Under the optimal process conditions:roasting temperature of 700℃,holding time of 110 min,and power-to-mass ratio of 110 W/g,the molybdenum state of existence was converted from MoS_(2) to Mo O3.The process of preparing sodium molybdate by alkali leaching of molybdenum calcine was investigated,the optimal leaching conditions include a solution concentration of 2.5 mol/L,a liquid-to-solid ratio of 2 mL/g,a leaching temperature of 60℃,and leaching solution termination at pH 8.The optimum conditions result in a leaching rate of sodium molybdate of 96.24%.Meanwhile,the content of sodium molybdate reaches 94.08wt%after leaching and removing impurities.Iron and aluminum impurities can be effectively separated by adjusting the pH of the leaching solution with sodium carbonate solution.This research avoids the shortcomings of the traditional process and utilizes the advantages of microwave metallurgy to prepare high-quality sodium molybdate,which provides a new idea for the highvalue utilization of molybdenum concentrate.
基金The authors are thankful to Ministry of Human Resource Development(presently Ministry of Education),Government of India,New Delhi,for providing research facility by sanctioning Center of Excellence(F.No.5-6/2013-TS VII)in Tissue Engineering and Center of Excellence in Orthopedic Tissue Engineering and Rehabilitation funded by World Bank under TEQIP-II.
文摘Sodium alginate(SA)/chitosan(CH)polyelectrolyte scaffold is a suitable substrate for tissue-engineering application.The present study deals with further improvement in the tensile strength and biological properties of this type of scaffold to make it a potential template for bone-tissue regeneration.We experimented with adding 0%–15%(volume fraction)gelatin(GE),a protein-based biopolymer known to promote cell adhesion,proliferation,and differentiation.The resulting tri-polymer complex was used as bioink to fabricate SA/CH/GEmatrices by three-dimensional(3D)printing.Morphological studies using scanning electron microscopy revealed the microfibrous porous architecture of all the structures,which had a pore size range of 383–419μm.X-ray diffraction and Fourier-transform infrared spectroscopy analyses revealed the amorphous nature of the scaffold and the strong electrostatic interactions among the functional groups of the polymers,thereby forming polyelectrolyte complexes which were found to improve mechanical properties and structural stability.The scaffolds exhibited a desirable degradation rate,controlled swelling,and hydrophilic characteristics which are favorable for bone-tissue engineering.The tensile strength improved from(386±15)to(693±15)kPa due to the increased stiffness of SA/CH scaffolds upon addition of gelatin.The enhanced protein adsorption and in vitro bioactivity(forming an apatite layer)confirmed the ability of the SA/CH/GE scaffold to offer higher cellular adhesion and a bone-like environment to cells during the process of tissue regeneration.In vitro biological evaluation including the MTT assay,confocal microscopy analysis,and alizarin red S assay showed a significant increase in cell attachment,cell viability,and cell proliferation,which further improved biomineralization over the scaffold surface.In addition,SA/CH containing 15%gelatin designated as SA/CH/GE15 showed superior performance to the other fabricated 3D structures,demonstrating its potential for use in bone-tissue engineering.
基金supported by the Natural Science Foundation of Jiangsu Province (BK20200084)The National Natural Science Foundation of China (U1903205 and 31972971)Collaborative Innovation Center of Food Safety and Quality Control in Jiangsu Province。
文摘Inflammatory bowel disease(IBD)is a complex relapsing inflammatory disease in the gut and is driven by complicated host-gut microbiome interactions.Gut commensals have shown different functions in IBD prevention and treatment.To gain a mechanistic understanding of how different commensals affect intestinal inflammation,we compared the protective effects of 6 probiotics(belonging to the genera Akkermansia,Bifidobacterium,Clostridium,and Enterococcus)on dextran sulfate sodium(DSS)-induced colitis in mice with or without gut microbiota.Anti-inflammatory properties(ratio of interleukin(IL)-10 and IL-12)of these strains were also evaluated in an in vitro mesenteric lymph nodes(MLN)co-culture system.Results showed that 4 probiotics(belonging to the species Bifidobacterium breve,Bifidobacterium bifidum,and Enterococcus faecalis)can alleviate colitis in normal mice.The probiotic strains differed in regulating the intestinal microbiota,cytokines(IL-10,IL-1βand interferon(IFN)-γ),and tight junction function(Zonulin-1 and Occludin).By constrast,Akkermansia muciniphila AH39 and Clostridium butyricum FHuNHHMY49T1 were not protective.Interestingly,B.breve JSNJJNM2 with high anti-inflammatory potential in the MLN model could relieve colitis symptoms in antibiotic cocktail(Abx)-treated mice.Meanwhile,E.faecalis FJSWX25M1induced low levels of cytokines in vitro and showed no beneficial effects.Therefore,we provided insight into the clinical application of probiotics in IBD treatment.
基金financially supported by the National Natural Science Foundation of China (Grants. 22075279, 22279137, 22125903, 22109040)National Key R&D Program of China (Grant 2022YFA1504100)+2 种基金Dalian Innovation Support Plan for High Level Talents (2019RT09)Dalian National Labo- ratory For Clean Energy (DNL), CAS, DNL Cooperation Fund, CAS (DNL202016, DNL202019), DICP (DICP I2020032)the Joint Fund of the Yulin University and the Dalian National Laboratory for Clean Energy (YLU-DNL Fund 2021002, YLU- DNL Fund 2021009)。
文摘Planar Na ion micro-supercapacitors(NIMSCs) that offer both high energy density and power density are deemed to a promising class of miniaturized power sources for wearable and portable microelectron-ics. Nevertheless, the development of NIMSCs are hugely impeded by the low capacity and sluggish Na ion kinetics in the negative electrode.Herein, we demonstrate a novel carbon-coated Nb_(2)O_5 microflower with a hierarchical structure composed of vertically intercrossed and porous nanosheets, boosting Na ion storage performance. The unique structural merits, including uniform carbon coating, ultrathin nanosheets and abun-dant pores, endow the Nb_(2)O_5 microflower with highly reversible Na ion storage capacity of 245 mAh g^(-1) at 0.25 C and excellent rate capability.Benefiting from high capacity and fast charging of Nb_(2)O_5 microflower, the planar NIMSCs consisted of Nb_(2)O_5 negative electrode and activated car-bon positive electrode deliver high areal energy density of 60.7 μWh cm^(-2),considerable voltage window of 3.5 V and extraordinary cyclability. Therefore, this work exploits a structural design strategy towards electrode materials for application in NIMSCs, holding great promise for flexible microelectronics.
基金Supported by the National Major Special Project for the Cultivation of New Genetically Modified Biological Varieties(Topic ZX08011-003)。
文摘Amaranthus retroflexus L. is a serious and widespread malignant weed in soybean fields in Heilongjiang Province. Exploring the dormancy characteristics of A. retroflexus L. seeds and the physiological response of its seedlings to acifluorfen sodium can provide a basis for further researches on its resistance mechanism. Using newly harvested and stored A. retroflexus L. seeds for one year as experimental materials, the effects of different concentrations of HCl, NaOH, water temperature, gibberellic acid(GA) and polyethylene glycol(PEG) on the dormancy and germination of A. retroflexus L. seeds were studied. The sensitivity of A. retroflexus L.to acifluorfen sodium was determined using bioassay. The effects on leaf chlorophyll content and target enzyme activity were studied at a normal dosage of 360 g a.i. hm^(-2) and a doubling dosage of 720 g a.i. hm^(-2) of acifluorfen sodium. Newly harvested seeds exhibiting dormancy were soaked in water of various temperatures and in different concentrations of NaOH and HCl, which were ineffective in breaking the seed dormancy. GA could break seed dormancy, and the highest seed germination rate reached 93.33% when they were soaked at 3 000 mg·L^(-1) for 72 h and 4 000 mg·L^(-1) for 48 h. The drought stress was simulated with a 15%-25% polyethylene glycol solution, which had no significant effect on the seed germination rate. The GR_(50) value of acifluorfen sodium for A. retroflexus L. was 705.7 g a.i. hm^(-2), which was 1.96 times the recommended dose in the field. After the application of different doses of acifluorfen sodium, the chlorophyll content of A. retroflexus L. reached its minimum value 3 days after treatment(DAT), and then gradually increased. The activity of the target enzyme protoporphyrinogen oxidase(PPO) reached the highest value at 7 DAT under different dosages, and gradually returned to normal levels thereafter. Soaking with gibberellin was an effective method to break seed dormancy. A. retroflexus L. seeds had certain drought resistance during the germination process. A. retroflexus L. was not sensitive to acifluorfen sodium and acifluorfen sodium ether, and could not effectively inhibit the PPO activity, indicating that A. retroflexus L. had target resistance to acifluorfen sodium.
基金financially supported by the Natural Science Foundation of Shandong Province(ZR2021QB055,ZR2023MB017,ZR2022JQ10)the National Natural Science Foundation of China(21901146,220781792,22274083)。
文摘Constructing heterostructure is considered as an effective strategy to address the sluggish electronic and ionic kinetics of anode materials for sodium ion batteries(SIBs).However,realizing the orientated growth and uniform distribution of the heterostructure is still a great challenge.Herein,the regulated novel CoSe_(2)/NiSe_(2)heterostructure confined in N-doped carbon nanofibers(CoSe_(2)/NiSe_(2)@N-C)are prepared by using Co/Ni-ZIF template,in which,the CoSe_(2)/NiSe_(2)heterostructures realize uniform distribution on a micro level.Benefiting from the unique heterostructure and N-doped carbon nanofibers,the CoSe_(2)/NiSe_(2)@N-C deliveries superior rate capability and durable cycle lifespan with a reversible capacity of 400.5 mA h g^(-1)after 5000 cycles at 2 A g^(-1).The Na-ion full battery with CoSe_(2)/NiSe_(2)@N-C anode and layered oxide cathode displays a remarkable energy density of 563 W h kg^(-1)with 241.1 W kg^(-1)at 0.1 A g^(-1).The theoretical calculations disclose that the periodic and directional built-in electric-field along with the heterointerfaces of CoSe_(2)/NiSe_(2)@N-C can accelerate electrochemical reaction kinetics.The in(ex)situ experimental measurements reveal the reversible conversion reaction and stable structure of CoSe_(2)/NiSe_(2)@N-C during Na+insertion/extraction.The study highlights the potential ability of precisely controlled heterostructure to stimulate the electrochemical performances of advanced anode for SIBs.
文摘BACKGROUND Sodium glucose cotransporter-2 inhibitors(SGLT-2i)are a class of drugs with modest antidiabetic efficacy,weight loss effect,and cardiovascular benefits as proven by multiple randomised controlled trials(RCTs).However,real-world data on the comparative efficacy and safety of individual SGLT-2i medications is sparse.AIM To study the comparative efficacy and safety of SGLT-2i using real-world clinical data.METHODS We evaluated the comparative efficacy data of 3 SGLT-2i drugs(dapagliflozin,canagliflozin,and empagliflozin)used for treating patients with type 2 diabetes mellitus.Data on the reduction of glycated hemoglobin(HbA1c),body weight,blood pressure(BP),urine albumin creatinine ratio(ACR),and adverse effects were recorded retrospectively.RESULTS Data from 467 patients with a median age of 64(14.8)years,294(62.96%)males and 375(80.5%)Caucasians were analysed.Median diabetes duration was 16.0(9.0)years,and the duration of SGLT-2i use was 3.6(2.1)years.SGLT-2i molecules used were dapagliflozin 10 mg(n=227;48.6%),canagliflozin 300 mg(n=160;34.3%),and empagliflozin 25 mg(n=80;17.1).Baseline median(interquartile range)HbA1c in mmol/mol were:dapagliflozin-78.0(25.3),canagliflozin-80.0(25.5),and empagliflozin-75.0(23.5)respectively.The respective median HbA1c reduction at 12 months and the latest review(just prior to the study)were:66.5(22.8)&69.0(24.0),67.0(16.3)&66.0(28.0),and 67.0(22.5)&66.5(25.8)respectively(P<0.001 for all comparisons from baseline).Significant improvements in body weight(in kilograms)from baseline to study end were noticed with dapagliflozin-101(29.5)to 92.2(25.6),and canagliflozin 100(28.3)to 95.3(27.5)only.Significant reductions in median systolic and diastolic BP,from 144(21)mmHg to 139(23)mmHg;(P=0.015),and from 82(16)mmHg to 78(19)mmHg;(P<0.001)respectively were also observed.A significant reduction of microalbuminuria was observed with canagliflozin only[ACR 14.6(42.6)at baseline to 8.9(23.7)at the study end;P=0.043].Adverse effects of SGLT-2i were as follows:genital thrush and urinary infection-20(8.8%)&17(7.5%)with dapagliflozin;9(5.6%)&5(3.13%)with canagliflozin;and 4(5%)&4(5%)with empagliflozin.Diabetic ketoacidosis was observed in 4(1.8%)with dapagliflozin and 1(0.63%)with canagliflozin.CONCLUSION Treatment of patients with SGLT-2i is associated with statistically significant reductions in HbA1c,body weight,and better than those reported in RCTs,with low side effect profiles.A review of large-scale real-world data is needed to inform better clinical practice decision making.
文摘Foam stability tests were performed using sodium dodecyl sulfate(SDS)surfactant and SiO2 nanoparticles as foaming system at different asphaltene concentrations,and the half-life of CO_(2) foam was measured.The mechanism of foam stability reduction in the presence of asphaltene was analyzed by scanning electron microscope(SEM),UV adsorption spectrophotometric concentration measurement and Zeta potential measurement.When the mass ratio of synthetic oil to foam-formation suspension was 1:9 and the asphaltene mass fraction increased from 0 to 15%,the half-life of SDS-stabilized foams decreased from 751 s to 239 s,and the half-life of SDS/silica-stabilized foams decreased from 912 s to 298 s.When the mass ratio of synthetic oil to foam-formation suspension was 2:8 and the asphaltene mass fraction increased from 0 to 15%,the half-life of SDS-stabilized foams decreased from 526 s to 171 s,and the half-life of SDS/silica-stabilized foams decreased from 660 s to 205 s.In addition,due to asphaltene-SDS/silica interaction in the aqueous phase,the absolute value of Zeta potential decreases,and the surface charges of particles reduce,leading to the reduction of repulsive forces between two interfaces of thin liquid film,which in turn,damages the foam stability.