A core shell structured C@MoxTi1-xO2-δnanocrystal with a functionalized interface(C@MTNC-FI)was fabricated via the hydrothermal method with subsequent annealing derived from tetrabutyl orthotitanate.The formation of ...A core shell structured C@MoxTi1-xO2-δnanocrystal with a functionalized interface(C@MTNC-FI)was fabricated via the hydrothermal method with subsequent annealing derived from tetrabutyl orthotitanate.The formation of anatase TiO2 was inhibited by the simultaneous presence of the hydrothermal etching/regrowth process,infiltration of Mo dopants and carbon coating,which endows the C@MTNC-FI with an ultrafine crystalline architecture that has a Mo-functionalized interface and carbon-coated shell.Pt Ru nanoparticles(NPs)were supported on C@MTNC-FI by employing a microwave-assisted polyol process(MAPP).The obtained Pt Ru/C@MTNC-FI catalyst has 2.68 times higher mass activity towards methanol electrooxidation than that of the un-functionalized catalyst(Pt Ru/C@TNC)and 1.65 times higher mass activity than that of Pt Ru/C catalyst with over 25%increase in durability.The improved catalytic performance is due to several aspects including ultrafine crystals of TiO2 with abundant grain boundaries,Mofunctionalized interface with enhanced electron interactions,and core shell architecture with excellent electrical transport properties.This work suggests the potential application of an interface-functionalized crystalline material as a sustainable and clean energy solution.展开更多
The grain growth and thermal stability of nanocrystalline Ni-TiO2composites were systematically investigated.Thenanocrystalline Ni-TiO2composites with different contents of TiO2were prepared via electroplating method ...The grain growth and thermal stability of nanocrystalline Ni-TiO2composites were systematically investigated.Thenanocrystalline Ni-TiO2composites with different contents of TiO2were prepared via electroplating method with the variation ofTiO2nano-particles concentration.The effect of TiO2content on the grain size,phase structure and microhardness was investigatedin detail.The corresponding grain growth and diffusion mechanisms during the heating process were also discussed.The optimalmicrohardness of HV50270was achieved for the composite with addition of20g/L TiO2nano-particles after annealing at400°C for90min.The calculation of the activation energy indicated that lattice diffusion dominated at high temperatures for thenanocrystalline Ni-TiO2composites.It was indicated that the increase of TiO2nano-particles content took effect on restricting thegrain growth at high temperatures by increasing the grain growth activation energy.展开更多
Nanocrystalline TiO2 thin films were successfully prepared by a new “water-cooked” method on both conductive glass substrates and flexible substrates at low temperature. Dye-sensitized solar cells based on these fil...Nanocrystalline TiO2 thin films were successfully prepared by a new “water-cooked” method on both conductive glass substrates and flexible substrates at low temperature. Dye-sensitized solar cells based on these films have exhibited high overall light-to-electricity conversion efficiencies of 4.67 % and 1.94 % on conductive glass substrate and flexible substrate, respectively, under the illumination at 100 mW/cm2.展开更多
Abstract:Nanocrystalline TiO2 thin films have been prepared on a conducting glass surface by coating quantized TiO2 colloids. The photoelectrochemical properties of TiO2 thin films and their dependence on various fact...Abstract:Nanocrystalline TiO2 thin films have been prepared on a conducting glass surface by coating quantized TiO2 colloids. The photoelectrochemical properties of TiO2 thin films and their dependence on various factors have been Studied. To obtain maximum photocurrent optimization of film thickness,sintering temperature and the PH of the electrolyte are very important.展开更多
AFM has been utilized to study the surface topography and the local conductivity of nanocrystalline TiO2 films. Improving the local conductivity by Ti(iso-C3H7O)4 treatment is characterized by quantitative analysis o...AFM has been utilized to study the surface topography and the local conductivity of nanocrystalline TiO2 films. Improving the local conductivity by Ti(iso-C3H7O)4 treatment is characterized by quantitative analysis of the simultaneous current image. The mechanism of Ti(iso C3H7O)4 treatment is discussed.展开更多
Effect of Ti(iso-C3H7O)4 treatment on the photoinduced charge carrier kinetics of nanocrystalline porous TiO2 films is studied by time-resolved microwave conductivity measurements. Analysis of the transient photocond...Effect of Ti(iso-C3H7O)4 treatment on the photoinduced charge carrier kinetics of nanocrystalline porous TiO2 films is studied by time-resolved microwave conductivity measurements. Analysis of the transient photoconductivity decays indicates that Ti(iso-C3H7O)4 treatment leads to an increased concentration of photogenerated charge carriers and a fast interfacial transfer rate of holes via the surface modification of the freshly growing TiO2 nanocrystallites.展开更多
The microporous nanocry'sta1line TiO2 electrode with large surface roughness factor hasbeen prepared on a conducting glass support. Modification of the TiO2 electrode by in situ preparingquantum sized RuS2 particl...The microporous nanocry'sta1line TiO2 electrode with large surface roughness factor hasbeen prepared on a conducting glass support. Modification of the TiO2 electrode by in situ preparingquantum sized RuS2 particles on the surface of TiO2 electrode extends the optical absorptionspectrum and photocurrent action specmim into visible region. In addition, compared with RuS2 bulknlaterials- a blue shifi in both absorption spectrum and photocurrent action speCtrum of RuS2rriO2elcctrode is obserived and explained in terms of quantum sized effect.展开更多
Particular kinds of TiO2 nanocrystalline electrodes were sensitized by aluminum phthalocyanines modified with sulfonate groups [ Al（OH） PcSm ]. It was found that in the red region, the electrodes show obvious photoe...Particular kinds of TiO2 nanocrystalline electrodes were sensitized by aluminum phthalocyanines modified with sulfonate groups [ Al（OH） PcSm ]. It was found that in the red region, the electrodes show obvious photoelectrical responses. The surface photovoltage spectra and photocurrent action spectra indicate that in the red region, the monomers of aluminum phthalocyanines have a greater influence on the determination of the photoelectrical response of TiO2 electrodes than the dimers. The dye-sensitized solar cells were obtained by using the aluminum phthalocyaninessensitized TiO2 electrodes and Pt electrodes, which have an open circuit photovoltage of 360 mV, a short circuit photocurrent of 39. 4 μA/cm^2 , a fill factor of 0. 54 and a maximum power output of 7.65 μW/cm^2 under a light intensity of 50 mW/cm^2.展开更多
基金the National Natural Science Foundation of China (Grant Nos. 21273058, 21673064, 51802059 and 21503059)China Postdoctoral Science Foundation (Grant Nos. 2018M631938, 2018T110307 and 2017M621284)+1 种基金Heilongjiang Postdoctoral Fund (LBH-Z17074)Fundamental Research Funds for the Central Universities (Grant No. HIT. NSRIF. 2019040 and 2019041)
文摘A core shell structured C@MoxTi1-xO2-δnanocrystal with a functionalized interface(C@MTNC-FI)was fabricated via the hydrothermal method with subsequent annealing derived from tetrabutyl orthotitanate.The formation of anatase TiO2 was inhibited by the simultaneous presence of the hydrothermal etching/regrowth process,infiltration of Mo dopants and carbon coating,which endows the C@MTNC-FI with an ultrafine crystalline architecture that has a Mo-functionalized interface and carbon-coated shell.Pt Ru nanoparticles(NPs)were supported on C@MTNC-FI by employing a microwave-assisted polyol process(MAPP).The obtained Pt Ru/C@MTNC-FI catalyst has 2.68 times higher mass activity towards methanol electrooxidation than that of the un-functionalized catalyst(Pt Ru/C@TNC)and 1.65 times higher mass activity than that of Pt Ru/C catalyst with over 25%increase in durability.The improved catalytic performance is due to several aspects including ultrafine crystals of TiO2 with abundant grain boundaries,Mofunctionalized interface with enhanced electron interactions,and core shell architecture with excellent electrical transport properties.This work suggests the potential application of an interface-functionalized crystalline material as a sustainable and clean energy solution.
基金Project(51401024)supported by the National Natural Science Foundation of ChinaProject(20150942006)supported by Basic Research Program of Beijing Institute of Technology,China
文摘The grain growth and thermal stability of nanocrystalline Ni-TiO2composites were systematically investigated.Thenanocrystalline Ni-TiO2composites with different contents of TiO2were prepared via electroplating method with the variation ofTiO2nano-particles concentration.The effect of TiO2content on the grain size,phase structure and microhardness was investigatedin detail.The corresponding grain growth and diffusion mechanisms during the heating process were also discussed.The optimalmicrohardness of HV50270was achieved for the composite with addition of20g/L TiO2nano-particles after annealing at400°C for90min.The calculation of the activation energy indicated that lattice diffusion dominated at high temperatures for thenanocrystalline Ni-TiO2composites.It was indicated that the increase of TiO2nano-particles content took effect on restricting thegrain growth at high temperatures by increasing the grain growth activation energy.
基金The authors appreciate the generous financial support of this work by the Major State Basic Research Development Program(Grant No.G200028205)Innovative Foundation of the Chinese Academy of Science(Grant No.KGCX2-303-02)+1 种基金the National Natural Science Foundation of China(Grant No.50221201)High-Tech Research and Development of China Program(Grant No.2002 AA302403).
文摘Nanocrystalline TiO2 thin films were successfully prepared by a new “water-cooked” method on both conductive glass substrates and flexible substrates at low temperature. Dye-sensitized solar cells based on these films have exhibited high overall light-to-electricity conversion efficiencies of 4.67 % and 1.94 % on conductive glass substrate and flexible substrate, respectively, under the illumination at 100 mW/cm2.
文摘Abstract:Nanocrystalline TiO2 thin films have been prepared on a conducting glass surface by coating quantized TiO2 colloids. The photoelectrochemical properties of TiO2 thin films and their dependence on various factors have been Studied. To obtain maximum photocurrent optimization of film thickness,sintering temperature and the PH of the electrolyte are very important.
基金This work was supported by National Research Fund for Fundamental Key Project (G2000028205) Innovative Foundation of Chinese Academy of Sciences and the Project of the National Natural Science Foundation of China (29873057). We thank Dr. D.S. Zhang for
文摘AFM has been utilized to study the surface topography and the local conductivity of nanocrystalline TiO2 films. Improving the local conductivity by Ti(iso-C3H7O)4 treatment is characterized by quantitative analysis of the simultaneous current image. The mechanism of Ti(iso C3H7O)4 treatment is discussed.
基金This work was supported by National Research Fund for Fundamental Key Project(G2000028205)Innovative Foundation of Chinese Academy of Sciences(KGCX2-303-02)the Project of the National Natural Science Foundation of China(29873057).
文摘Effect of Ti(iso-C3H7O)4 treatment on the photoinduced charge carrier kinetics of nanocrystalline porous TiO2 films is studied by time-resolved microwave conductivity measurements. Analysis of the transient photoconductivity decays indicates that Ti(iso-C3H7O)4 treatment leads to an increased concentration of photogenerated charge carriers and a fast interfacial transfer rate of holes via the surface modification of the freshly growing TiO2 nanocrystallites.
文摘The microporous nanocry'sta1line TiO2 electrode with large surface roughness factor hasbeen prepared on a conducting glass support. Modification of the TiO2 electrode by in situ preparingquantum sized RuS2 particles on the surface of TiO2 electrode extends the optical absorptionspectrum and photocurrent action specmim into visible region. In addition, compared with RuS2 bulknlaterials- a blue shifi in both absorption spectrum and photocurrent action speCtrum of RuS2rriO2elcctrode is obserived and explained in terms of quantum sized effect.
基金Supported by the National Natural Science Foundation of China(Nos. 60271020 and 20125513)
文摘Particular kinds of TiO2 nanocrystalline electrodes were sensitized by aluminum phthalocyanines modified with sulfonate groups [ Al（OH） PcSm ]. It was found that in the red region, the electrodes show obvious photoelectrical responses. The surface photovoltage spectra and photocurrent action spectra indicate that in the red region, the monomers of aluminum phthalocyanines have a greater influence on the determination of the photoelectrical response of TiO2 electrodes than the dimers. The dye-sensitized solar cells were obtained by using the aluminum phthalocyaninessensitized TiO2 electrodes and Pt electrodes, which have an open circuit photovoltage of 360 mV, a short circuit photocurrent of 39. 4 μA/cm^2 , a fill factor of 0. 54 and a maximum power output of 7.65 μW/cm^2 under a light intensity of 50 mW/cm^2.
