We demonstrate a novel picosecond optical parametric preamplification to generate high-stability, high-energy and high-contrast seed pulses. The 5ps seed pulse is amplified from 60pJ to 300μJ with an 8.6ps/ 3mJ pump ...We demonstrate a novel picosecond optical parametric preamplification to generate high-stability, high-energy and high-contrast seed pulses. The 5ps seed pulse is amplified from 60pJ to 300μJ with an 8.6ps/ 3mJ pump laser in a signal stage of short pulse non-collinear optical parametric chirped pulse amplification. The total gain is more than 106 and the rms energy stability is under 1.35%. The contrast ratio is higher than 10s within a scale of 20ps before the main pulse. Consequently, the improvement factor of the signal contrast is approximately equal to the gain 106 outside the pump window.展开更多
We demonstrate a laser diode end-pumped helium gas-cooled multislab Nd:glass laser amplifier. The design and thermal management of the proposed laser amplifier are discussed. The thermally induced wavefront aberration...We demonstrate a laser diode end-pumped helium gas-cooled multislab Nd:glass laser amplifier. The design and thermal management of the proposed laser amplifier are discussed. The thermally induced wavefront aberration of the slabs was also measured and compared with simulation results. A small-signal single-pass longitudinal gain of 1.8 was measured with a pump energy of 7.3 J. With an injected seed energy of 0.6 m J, the output energy from the amplifier reached 0.5 J at 0.2 Hz and 0.43 J at 0.5 Hz in a multipass extraction geometry, thus demonstrating the feasibility of diode-pumped,high-energy lasers with direct gas cooling.展开更多
A novel four light ray path test method for measuring residual reflectance has been presented. Residual reflectance spatial distribution at a cladding interface was measured using the technique. Residual reflectance c...A novel four light ray path test method for measuring residual reflectance has been presented. Residual reflectance spatial distribution at a cladding interface was measured using the technique. Residual reflectance could be on the order of 10-5 by matching the refractive index of Nd:glass, polymer, and cladding glass and eliminating defects in the adhesive layer. Residual reflection spatial distribution appears to be similar to Newton rings due to the edge surface flatness. The relationship between the residual reflectance and the edge surface flatness was discussed, and the results revealed that the edge surface flatness is very important during the cladding process.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos 11604350 and 61405211
文摘We demonstrate a novel picosecond optical parametric preamplification to generate high-stability, high-energy and high-contrast seed pulses. The 5ps seed pulse is amplified from 60pJ to 300μJ with an 8.6ps/ 3mJ pump laser in a signal stage of short pulse non-collinear optical parametric chirped pulse amplification. The total gain is more than 106 and the rms energy stability is under 1.35%. The contrast ratio is higher than 10s within a scale of 20ps before the main pulse. Consequently, the improvement factor of the signal contrast is approximately equal to the gain 106 outside the pump window.
基金supported by the Shanghai Science and Technology Foundation for Young Scholars(Grant No.17YF1429600)the National Natural Science Foundation of China(Grant No.61705242)
文摘We demonstrate a laser diode end-pumped helium gas-cooled multislab Nd:glass laser amplifier. The design and thermal management of the proposed laser amplifier are discussed. The thermally induced wavefront aberration of the slabs was also measured and compared with simulation results. A small-signal single-pass longitudinal gain of 1.8 was measured with a pump energy of 7.3 J. With an injected seed energy of 0.6 m J, the output energy from the amplifier reached 0.5 J at 0.2 Hz and 0.43 J at 0.5 Hz in a multipass extraction geometry, thus demonstrating the feasibility of diode-pumped,high-energy lasers with direct gas cooling.
文摘A novel four light ray path test method for measuring residual reflectance has been presented. Residual reflectance spatial distribution at a cladding interface was measured using the technique. Residual reflectance could be on the order of 10-5 by matching the refractive index of Nd:glass, polymer, and cladding glass and eliminating defects in the adhesive layer. Residual reflection spatial distribution appears to be similar to Newton rings due to the edge surface flatness. The relationship between the residual reflectance and the edge surface flatness was discussed, and the results revealed that the edge surface flatness is very important during the cladding process.
