4-tert-butylstyrene-EPDM-divinylbenzene graft terpolymer (PBED) was prepared by graft cross-polymerization in toluene using BPO as an initiator. The gel-PBED and solPBED were isolated from extraction of tetrahydrofura...4-tert-butylstyrene-EPDM-divinylbenzene graft terpolymer (PBED) was prepared by graft cross-polymerization in toluene using BPO as an initiator. The gel-PBED and solPBED were isolated from extraction of tetrahydrofuran (THF), and then they were identified by IR spectroscopy. The maximum oil-absorptivity of gel-PBED produced from the optinum reaction conditions was 8 420% but its swelling rate was very low. The highest oil-absorptivity of photocrosslinked sol-PBED film was 5 800%. Although its oil absorbency was not as high as gel-PBED' s, swelling rate was higher than that of gelPBED and was suitable for commercial purpose. After swelling in oil, neither gel PBED nor photocrosslinked sol-PBED film having high oil-absorptivity had sufficient mechanical strength to be taken out of oil wholly. As is known, composite technique is one of the useful methods for reinforcing them. Fibers, sponges and non-woven cloths were used as reinforcers or supporters in this work. Oil-absorptivities and swelling kinetics were evaluated by method ASTM (F726 - 81 ) and an experimental equation. The mechanical properties and the morphologies of some composites were measured by tensile tester and SEM , respectively.展开更多
The outbreak of coronavirus has led to an increase in the demand for facemasks globally. Unavailability of appropriate polypropylene non-woven fabrics face masks as a result of inadequate supply to satisfy the growing...The outbreak of coronavirus has led to an increase in the demand for facemasks globally. Unavailability of appropriate polypropylene non-woven fabrics face masks as a result of inadequate supply to satisfy the growing population has brought about the manufacturing of locally fabrics masks to augment or substitute standard medical class facemasks. The study aims at analyzing airflow of these locally manufactured fabrics to determine possible means of transmitting the virus as well as establish comfort of the user of these masks. Standard polypropylene non-woven, woven and knitted fabrics were considered for the study. Air permeability test was conducted on these fabrics using Frazier Air permeability tester. Depending on the property significant variation in the textile fabrics, polypropylene non-woven is widely accepted for facial masks. Nevertheless, this study illustrates that woven and knitted fabrics have more open structures, which allow a high rate of air penetration and so may require two or three layers to prevent antimicrobial or antiviral potential.展开更多
In this paper,the failure features of strip tensile specimen were observed and analysed for need-le-punched non-woven geotextiles.A mechanical model which expresses the relation between thetensile modulus,the strip sp...In this paper,the failure features of strip tensile specimen were observed and analysed for need-le-punched non-woven geotextiles.A mechanical model which expresses the relation between thetensile modulus,the strip specimen size,contraction factor and the tensile strength of non-wovenfabric was derived.The theoretical prediction showed that the main factor influencing tensilestrength of non-woven geotextile specimens with different size is the contraction factor of specimenor the specimen aspect ratio(width/length).The larger the aspect ratio,the higher the tensilestrength test value of geotextiles,but the experiments showed that the specimen tensile strength isnot increased with increasing the width of specimen.The reason was discussed and it seemed thatthe deviation could be served as an indication of the degree of imperfectness of the non-wovenstructure.展开更多
Nano-silver and waterborne polyurethane(WPU)composite emulsion was synthesized.The average diameter of silver nanoparticles(SNPs)was about 20 nm,and the average diameter of WPU was 101.32 nm.The anti-bacteria finishin...Nano-silver and waterborne polyurethane(WPU)composite emulsion was synthesized.The average diameter of silver nanoparticles(SNPs)was about 20 nm,and the average diameter of WPU was 101.32 nm.The anti-bacteria finishing of a polypropylene non-woven fabric(NWF)was carried out by ultraviolet finishing technology and the double dipping twin-roll method.The standard AATCC100 was used to test the antimicrobial activity of the samples.The results showed that the antimicrobial rates of Klebsiella pneumoniae(K.pneumoniae)and Staphylococcus aureus(S.aureus)were above 90%,which indicated that the NWF finishing had good antimicrobial activity.In addition,the thermal stability,mechanical properties,whiteness and contact angle of antimicrobial finishing nonwovens were characterized.The results showed that the performance of antimicrobial nonwovens was stable at 300℃.The breaking strength was better than that of untreated nonwovens,and the contact angle reached 119.1°.展开更多
This work aims at studying the effect of hygrothermal and UV cyclic aging on the tensile properties and esthetic characteristics of non-woven composites.The composite materials were thermo-compressed from non-woven ma...This work aims at studying the effect of hygrothermal and UV cyclic aging on the tensile properties and esthetic characteristics of non-woven composites.The composite materials were thermo-compressed from non-woven mats made up of PP and flax or kenaf fibers.This works included evaluating the change in color appearance and analyzing the variations in tensile properties and damage mechanisms,depending on the aging time.The presence of the UV protection film on the composite surface showed its effectiveness against aging.From visual observations and measurement of colorimetric parameters,it has been proved effective in the reduction of the bleaching and yellowing of the composites.As regards the tensile tests,the UV protection film enabled to stabilize the Young’s modulus after 1-week aging for Kenaf/PP and after 3-weeks for Flax/PP.After 4-weeks aging,it halved the number of acoustic emission events related to interfacial decohesion and fiber slippage/pull out for Flax/PP and Kenaf/PP composites.展开更多
The combination of a 4-node quadrilateral mixed interpolation of tensorial components element(MITC4)and the cell-based smoothed finite element method(CSFEM)was formulated and implemented in this work for the analysis ...The combination of a 4-node quadrilateral mixed interpolation of tensorial components element(MITC4)and the cell-based smoothed finite element method(CSFEM)was formulated and implemented in this work for the analysis of free vibration and unidirectional buckling of shell structures.This formulation was applied to numerous numerical examples of non-woven fabrics.As CSFEM schemes do not require coordinate transformation,spurious modes and numerical instabilities are prevented using bilinear quadrilateral element subdivided into two,three and four smoothing cells.An improvement of the original CSFEM formulation was made regarding the calculation of outward unit normal vectors,which allowed to remove the integral operator in the strain smoothing operation.This procedure conducted both to the simplification of the developed formulation and the reduction of computational cost.A wide range of values for the thickness-to-length ratio and edge boundary conditions were analysed.The developed numerical model proved to overcome the shear locking phenomenon with success,revealing both reduced implementation effort and computational cost in comparison to the conventional FEM approach.The cell-based strain smoothing technique used in this work yields accurate results and generally attains higher convergence rate in energy at low computational cost.展开更多
In this work, the mechanical tensile and elongation properties and the non-woven polypropylene flammability were evaluated, with variations of gratings, compared to non-woven fabrics prepared with thermo film and TNT ...In this work, the mechanical tensile and elongation properties and the non-woven polypropylene flammability were evaluated, with variations of gratings, compared to non-woven fabrics prepared with thermo film and TNT （fabric non-fabric）, for applications such as geotextile sorption of oil spills. The results showed high values of tensile strength for non-woven fabric prepared for application as geotextile, improving the mechanical properties of rupture.展开更多
Situated in the Shilong Industrial District of Mentougou, Beijing, the Beijing Dayuan Non-woven Fabric Co. Ltd is a Sino-foreign joint venture producing non-woven fabrics, set up in 1991.
The mixing of non-woven steel fibres in melt overflow process for use in automotive muffler systems was simulated. The aim was to identify optimum parameters for achieving a good fibre mix. Numerical models of mixing ...The mixing of non-woven steel fibres in melt overflow process for use in automotive muffler systems was simulated. The aim was to identify optimum parameters for achieving a good fibre mix. Numerical models of mixing chambers of melt overflow process were developed. Multiphysics analyses involving heat transfer, fluid flow and particle tracking were carried out using COMSOL code. The influence of air jet configurations on the fibre distribution was studied. The fibres settled on the moving bed within the mixing chamber were examined for their uniformity. The effect of additional air jets to the existing chamber in a range of regions was explored. An optimum configuration was identified by analyzing the compactness of the particle clusters deposited in the simulation and validated using pixel data acquired from real time imaging. The results showed that by employing dual air jets at the front end of the chamber, the density of the fibre material has improved. We conclude that through multi-physics modelling, it was possible to identify the optimum air-jet configurations leading to fibre uniformity and its distribution. This work also paves the way for incorporating a vision system to evaluate fibre density in real time.展开更多
Objective: To choose a reasonably priced and low-cost treatment towel suitable for clinical application of hospital so as to reduce the cost of the hospital and make a reasonable use of resources through the cost anal...Objective: To choose a reasonably priced and low-cost treatment towel suitable for clinical application of hospital so as to reduce the cost of the hospital and make a reasonable use of resources through the cost analysis and comparison of the plain cotton and disposable non-woven treatment towels. Methods: The cost of the single pack plain cotton towel and disposable non-woven towel were analyzed and at the same time, 49185 packs of plain cotton towels which were the total consumption quantity of our hospital in 2017 and the same quantity of disposable non-woven towers were analyzed in the cost for comparison. Results:A single pack of disposable non-woven towel was RMB 2.50 cheaper than the plain cotton towel and the use of disposable non-woven towel can save the cost of RMB 2.50 per pack. In 2017, 49185 packs of plain cotton towel were used in total, which cost RMB 122962.50 less than the same quantity of disposable non-woven towels and using the disposable non-woven towel could save RMB 122962.50 annually. Conclusion: Compared with the plain cotton towel, the non-woven shares the advantages of none flocculation, longer storage time and better antibacterial effect as well as the material, cleaning and labor costs-saving. The cost of the disposable non-woven treatment towel is lower than that of the reusable plain cotton towel. Therefore, it is recommended to use the disposable non-woven treatment towel.展开更多
As one of the three backbone con- sumptions (apparel, home-textile, tech- textile or industrial applications), non- woven textile industry performed well in 2005, but problems still remain. An official from the State ...As one of the three backbone con- sumptions (apparel, home-textile, tech- textile or industrial applications), non- woven textile industry performed well in 2005, but problems still remain. An official from the State Development and Reform Commission - China’s top planner, mapped out economic blue- prints for this fast-growing sector in 2006.展开更多
文摘4-tert-butylstyrene-EPDM-divinylbenzene graft terpolymer (PBED) was prepared by graft cross-polymerization in toluene using BPO as an initiator. The gel-PBED and solPBED were isolated from extraction of tetrahydrofuran (THF), and then they were identified by IR spectroscopy. The maximum oil-absorptivity of gel-PBED produced from the optinum reaction conditions was 8 420% but its swelling rate was very low. The highest oil-absorptivity of photocrosslinked sol-PBED film was 5 800%. Although its oil absorbency was not as high as gel-PBED' s, swelling rate was higher than that of gelPBED and was suitable for commercial purpose. After swelling in oil, neither gel PBED nor photocrosslinked sol-PBED film having high oil-absorptivity had sufficient mechanical strength to be taken out of oil wholly. As is known, composite technique is one of the useful methods for reinforcing them. Fibers, sponges and non-woven cloths were used as reinforcers or supporters in this work. Oil-absorptivities and swelling kinetics were evaluated by method ASTM (F726 - 81 ) and an experimental equation. The mechanical properties and the morphologies of some composites were measured by tensile tester and SEM , respectively.
文摘The outbreak of coronavirus has led to an increase in the demand for facemasks globally. Unavailability of appropriate polypropylene non-woven fabrics face masks as a result of inadequate supply to satisfy the growing population has brought about the manufacturing of locally fabrics masks to augment or substitute standard medical class facemasks. The study aims at analyzing airflow of these locally manufactured fabrics to determine possible means of transmitting the virus as well as establish comfort of the user of these masks. Standard polypropylene non-woven, woven and knitted fabrics were considered for the study. Air permeability test was conducted on these fabrics using Frazier Air permeability tester. Depending on the property significant variation in the textile fabrics, polypropylene non-woven is widely accepted for facial masks. Nevertheless, this study illustrates that woven and knitted fabrics have more open structures, which allow a high rate of air penetration and so may require two or three layers to prevent antimicrobial or antiviral potential.
文摘In this paper,the failure features of strip tensile specimen were observed and analysed for need-le-punched non-woven geotextiles.A mechanical model which expresses the relation between thetensile modulus,the strip specimen size,contraction factor and the tensile strength of non-wovenfabric was derived.The theoretical prediction showed that the main factor influencing tensilestrength of non-woven geotextile specimens with different size is the contraction factor of specimenor the specimen aspect ratio(width/length).The larger the aspect ratio,the higher the tensilestrength test value of geotextiles,but the experiments showed that the specimen tensile strength isnot increased with increasing the width of specimen.The reason was discussed and it seemed thatthe deviation could be served as an indication of the degree of imperfectness of the non-wovenstructure.
基金National Natural Science Foundation of China(Regional Fund)(No.51863020)
文摘Nano-silver and waterborne polyurethane(WPU)composite emulsion was synthesized.The average diameter of silver nanoparticles(SNPs)was about 20 nm,and the average diameter of WPU was 101.32 nm.The anti-bacteria finishing of a polypropylene non-woven fabric(NWF)was carried out by ultraviolet finishing technology and the double dipping twin-roll method.The standard AATCC100 was used to test the antimicrobial activity of the samples.The results showed that the antimicrobial rates of Klebsiella pneumoniae(K.pneumoniae)and Staphylococcus aureus(S.aureus)were above 90%,which indicated that the NWF finishing had good antimicrobial activity.In addition,the thermal stability,mechanical properties,whiteness and contact angle of antimicrobial finishing nonwovens were characterized.The results showed that the performance of antimicrobial nonwovens was stable at 300℃.The breaking strength was better than that of untreated nonwovens,and the contact angle reached 119.1°.
文摘This work aims at studying the effect of hygrothermal and UV cyclic aging on the tensile properties and esthetic characteristics of non-woven composites.The composite materials were thermo-compressed from non-woven mats made up of PP and flax or kenaf fibers.This works included evaluating the change in color appearance and analyzing the variations in tensile properties and damage mechanisms,depending on the aging time.The presence of the UV protection film on the composite surface showed its effectiveness against aging.From visual observations and measurement of colorimetric parameters,it has been proved effective in the reduction of the bleaching and yellowing of the composites.As regards the tensile tests,the UV protection film enabled to stabilize the Young’s modulus after 1-week aging for Kenaf/PP and after 3-weeks for Flax/PP.After 4-weeks aging,it halved the number of acoustic emission events related to interfacial decohesion and fiber slippage/pull out for Flax/PP and Kenaf/PP composites.
基金supported by the Portuguese Foundation for Science and Technology(FCT)through project UID/CTM/00264/2019 of 2C2T—Centro de Ciência e Tecnologia Têxtil,hold by National Founds of FCT/MCTES,and project UID/EEA/04436/2013,COMPETE 2020 with the code POCI-01-0145-FEDER-006941.
文摘The combination of a 4-node quadrilateral mixed interpolation of tensorial components element(MITC4)and the cell-based smoothed finite element method(CSFEM)was formulated and implemented in this work for the analysis of free vibration and unidirectional buckling of shell structures.This formulation was applied to numerous numerical examples of non-woven fabrics.As CSFEM schemes do not require coordinate transformation,spurious modes and numerical instabilities are prevented using bilinear quadrilateral element subdivided into two,three and four smoothing cells.An improvement of the original CSFEM formulation was made regarding the calculation of outward unit normal vectors,which allowed to remove the integral operator in the strain smoothing operation.This procedure conducted both to the simplification of the developed formulation and the reduction of computational cost.A wide range of values for the thickness-to-length ratio and edge boundary conditions were analysed.The developed numerical model proved to overcome the shear locking phenomenon with success,revealing both reduced implementation effort and computational cost in comparison to the conventional FEM approach.The cell-based strain smoothing technique used in this work yields accurate results and generally attains higher convergence rate in energy at low computational cost.
文摘In this work, the mechanical tensile and elongation properties and the non-woven polypropylene flammability were evaluated, with variations of gratings, compared to non-woven fabrics prepared with thermo film and TNT （fabric non-fabric）, for applications such as geotextile sorption of oil spills. The results showed high values of tensile strength for non-woven fabric prepared for application as geotextile, improving the mechanical properties of rupture.
文摘Situated in the Shilong Industrial District of Mentougou, Beijing, the Beijing Dayuan Non-woven Fabric Co. Ltd is a Sino-foreign joint venture producing non-woven fabrics, set up in 1991.
文摘The mixing of non-woven steel fibres in melt overflow process for use in automotive muffler systems was simulated. The aim was to identify optimum parameters for achieving a good fibre mix. Numerical models of mixing chambers of melt overflow process were developed. Multiphysics analyses involving heat transfer, fluid flow and particle tracking were carried out using COMSOL code. The influence of air jet configurations on the fibre distribution was studied. The fibres settled on the moving bed within the mixing chamber were examined for their uniformity. The effect of additional air jets to the existing chamber in a range of regions was explored. An optimum configuration was identified by analyzing the compactness of the particle clusters deposited in the simulation and validated using pixel data acquired from real time imaging. The results showed that by employing dual air jets at the front end of the chamber, the density of the fibre material has improved. We conclude that through multi-physics modelling, it was possible to identify the optimum air-jet configurations leading to fibre uniformity and its distribution. This work also paves the way for incorporating a vision system to evaluate fibre density in real time.
文摘Objective: To choose a reasonably priced and low-cost treatment towel suitable for clinical application of hospital so as to reduce the cost of the hospital and make a reasonable use of resources through the cost analysis and comparison of the plain cotton and disposable non-woven treatment towels. Methods: The cost of the single pack plain cotton towel and disposable non-woven towel were analyzed and at the same time, 49185 packs of plain cotton towels which were the total consumption quantity of our hospital in 2017 and the same quantity of disposable non-woven towers were analyzed in the cost for comparison. Results:A single pack of disposable non-woven towel was RMB 2.50 cheaper than the plain cotton towel and the use of disposable non-woven towel can save the cost of RMB 2.50 per pack. In 2017, 49185 packs of plain cotton towel were used in total, which cost RMB 122962.50 less than the same quantity of disposable non-woven towels and using the disposable non-woven towel could save RMB 122962.50 annually. Conclusion: Compared with the plain cotton towel, the non-woven shares the advantages of none flocculation, longer storage time and better antibacterial effect as well as the material, cleaning and labor costs-saving. The cost of the disposable non-woven treatment towel is lower than that of the reusable plain cotton towel. Therefore, it is recommended to use the disposable non-woven treatment towel.
文摘As one of the three backbone con- sumptions (apparel, home-textile, tech- textile or industrial applications), non- woven textile industry performed well in 2005, but problems still remain. An official from the State Development and Reform Commission - China’s top planner, mapped out economic blue- prints for this fast-growing sector in 2006.
