The development of quantum optics theory based on the method of integration within an ordered product of operators(IWOP)has greatly stimulated the study of quantum states in the light field,especially non-Gaussian sta...The development of quantum optics theory based on the method of integration within an ordered product of operators(IWOP)has greatly stimulated the study of quantum states in the light field,especially non-Gaussian states with various non-classical properties.In this paper,the two-mode squeezing operator is derived with integral theory within the Weyl ordering product of operators using a combinatorial field in which one mode is a chaotic field and the other mode is a vacuum field.The density operator of the new light field,its entanglement property and photon number distribution are analyzed.We also note that tracing a three-mode pure state can yield this new light field.These methods represent a theoretical approach to investigating new density operators of light fields.展开更多
This part demonstrates a prototype system which has been constructed to enable the allocation of orders of different product types to different manufacturing locations . ’ What - if’ experiments using this system sh...This part demonstrates a prototype system which has been constructed to enable the allocation of orders of different product types to different manufacturing locations . ’ What - if’ experiments using this system show that different allocation rules would provide different outcomes in terms of the number of unallocated orders. A high number of unallocated orders will have a direct Impact on workload. Further research effort is necessary to channel into the exercbe of production order allocation with particular reference to allocation rules.展开更多
By introducing the s-parameterized generalized Wigner operator into phase-space quantum mechanics we invent the technique of integration within s-ordered product of operators(which considers normally ordered,antinorma...By introducing the s-parameterized generalized Wigner operator into phase-space quantum mechanics we invent the technique of integration within s-ordered product of operators(which considers normally ordered,antinormally ordered and Weyl ordered product of operators as its special cases).The s-ordered operator expansion(denoted by...) formula of density operators is derived,which is ρ = 2 1 s ∫ d2βπβ|ρ |β exp { 2 s 1(s|β|2 β a + βa a a) }.The s-parameterized quantization scheme is thus completely established.展开更多
In an asynchronous cooperative editing workflow of a structured document, each of the co-authors receives in the different phases of the editing process, a copy of the document to insert its contribution. For confiden...In an asynchronous cooperative editing workflow of a structured document, each of the co-authors receives in the different phases of the editing process, a copy of the document to insert its contribution. For confidentiality reasons, this copy may be only a partial replica containing only parts of the (global) document which are of demonstrated interest for the considered co-author. Note that some parts may be a demonstrated interest over a co-author;they will therefore be accessible concurrently. When it’s synchronization time (e.g. at the end of an asynchronous editing phase of the process), we want to merge all contributions of all authors in a single document. Due to the asynchronism of edition and to the potential existence of the document parts offering concurrent access, conflicts may arise and make partial replicas unmergeable in their entirety: they are inconsistent, meaning that they contain conflictual parts. The purpose of this paper is to propose a merging approach said by consensus of such partial replicas using tree automata. Specifically, from the partial replicas updates, we build a tree automaton that accepts exactly the consensus documents. These documents are the maximum prefixes containing no conflict of partial replicas merged.展开更多
Stochastic demand is an important factor that heavily affects production planning.It influences activities such as purchasing,manufacturing,and selling,and quick adaption is required.In production planning,for reasons...Stochastic demand is an important factor that heavily affects production planning.It influences activities such as purchasing,manufacturing,and selling,and quick adaption is required.In production planning,for reasons such as reducing costs and obtaining supplier discounts,many decisions must be made in the initial stage when demand has not been realized.The effects of non-optimal decisions will propagate to later stages,which can lead to losses due to overstocks or out-of-stocks.To find the optimal solutions for the initial and later stage regarding demand realization,this study proposes a stochastic two-stage linear program-ming model for a multi-supplier,multi-material,and multi-product purchasing and production planning process.The objective function is the expected total cost after two stages,and the results include detailed plans for purchasing and production in each demand scenario.Small-scale problems are solved through a deterministic equivalent transformation technique.To solve the problems in the large scale,an algorithm combining metaheuristic and sample average approximation is suggested.This algorithm can be implemented in parallel to utilize the power of the solver.The algorithm based on the observation that if the remaining quantity of materials and number of units of products at the end of the initial stage are given,then the problems of the first and second stages can be decomposed.展开更多
A kind of second-order implicit fractional step characteristic finite difference method is presented in this paper for the numerically simulation coupled system of enhanced(chemical) oil production in porous media.Som...A kind of second-order implicit fractional step characteristic finite difference method is presented in this paper for the numerically simulation coupled system of enhanced(chemical) oil production in porous media.Some techniques,such as the calculus of variations,energy analysis method,commutativity of the products of difference operators,decomposition of high-order difference operators and the theory of a priori estimates are introduced and an optimal order error estimates in l^2 norm is derived.This method has been applied successfully to the numerical simulation of enhanced oil production in actual oilfields,and the simulation results are quite interesting and satisfactory.展开更多
Let K<sup>n×n</sup> be the set of all n×n matrices and K<sub>r</sub><sup>n×n</sup> the set {A∈K<sup>n×n</sup>|rankA=r} on askew field K. Zhuang [1] ...Let K<sup>n×n</sup> be the set of all n×n matrices and K<sub>r</sub><sup>n×n</sup> the set {A∈K<sup>n×n</sup>|rankA=r} on askew field K. Zhuang [1] denotes by A<sup>#</sup> the group inverse of A∈K<sup>n×n</sup> which is the solu-tion of the euqations:AXA=A, XAX=X, AX=AX.展开更多
A kind of second-order implicit upwind fractional step finite difference methods are presented for the numerical simulation of coupled systems for enhanced(chemical)oil production with capillary force in the porous me...A kind of second-order implicit upwind fractional step finite difference methods are presented for the numerical simulation of coupled systems for enhanced(chemical)oil production with capillary force in the porous media.Some techniques,e.g.,the calculus of variations,the energy analysis method,the commutativity of the products of difference operators,the decomposition of high-order difference operators,and the theory of a priori estimate,are introduced.An optimal order error estimate in the l^2 norm is derived.The method is successfully used in the numerical simulation of the enhanced oil production in actual oilfields.The simulation results are satisfactory and interesting.展开更多
As a rough cut planning exercise,production order allo-cation for offshore manu facturing sites in the clothingindustry has received little attention as does other typesof planning like production planning.This paper ...As a rough cut planning exercise,production order allo-cation for offshore manu facturing sites in the clothingindustry has received little attention as does other typesof planning like production planning.This paper outlinesan investigation into the exercise of production order al-location in the clothing industry.We have identified thatpractitioners involving in this exercise are not unanimousin the selection of offshore sites.Part 1 presents thebackground,objectives,process and conceptual model ofproduction order allocation.展开更多
By virtue of the coherent state representation of the newly introduced Fresnel operator and its group product property,we obtain new decomposition of the Fresnel operator as the product of the quadratic phase operator...By virtue of the coherent state representation of the newly introduced Fresnel operator and its group product property,we obtain new decomposition of the Fresnel operator as the product of the quadratic phase operator,the squeezing operator,and the fractional Fourier transformation operator,which in turn sheds light on the matrix optics design of ABCD-systems.The new decomposition for the two-mode Fresnel operator is also obtained by the use of entangled state representation.展开更多
Heavy-duty machine tools are composed of many subsystems with different functions,and their reliability is governed by the reliabilities of these subsystems.It is important to rank the weaknesses of subsystems and ide...Heavy-duty machine tools are composed of many subsystems with different functions,and their reliability is governed by the reliabilities of these subsystems.It is important to rank the weaknesses of subsystems and identify the weakest subsystem to optimize products and improve their reliabilities.However,traditional ranking methods based on failure mode effect and critical analysis(FMECA)does not consider the complex maintenance of products.Herein,a weakness ranking method for the subsystems of heavy-duty machine tools is proposed based on generalized FMECA information.In this method,eight reliability indexes,including maintainability and maintenance cost,are considered in the generalized FMECA information.Subsequently,the cognition best worst method is used to calculate the weight of each screened index,and the weaknesses of the subsystems are ranked using a technique for order preference by similarity to an ideal solution.Finally,based on the failure data collected from certain domestic heavy-duty horizontal lathes,the weakness ranking result of the subsystems is obtained to verify the effectiveness of the proposed method.An improved weakness ranking method that can comprehensively analyze and identify weak subsystems is proposed herein for designing and improving the reliability of complex electromechanical products.展开更多
Cyanobacteria are oxygenic photosynthetic Gram-negative bacteria that can form potentially toxic blooms in eutrophic and slow flowing aquatic ecosystems. Bloom toxicity varies spatially and temporally, but understandi...Cyanobacteria are oxygenic photosynthetic Gram-negative bacteria that can form potentially toxic blooms in eutrophic and slow flowing aquatic ecosystems. Bloom toxicity varies spatially and temporally, but understanding the mechanisms that drive these changes remains largely a mystery. Changes in bloom toxicity may result from changes in intracellular toxin pool sizes of cyanotoxins with differing molecular toxicities, and/or from changes in the cell concentrations of toxic and non-toxic cyanobacterial species or strains within bloom populations. We show here how first-order rate kinetics at the cellular level can be used to explain how environmental conditions drive changes in bloom toxicity at the ecological level. First order rate constants can be calculated for changes in cell concentration( μ_c : specific cell division rate) or the volumetric biomass concentration( μ_g : specific growth rate) between short time intervals throughout the cell cycle. Similar first order rate constants can be calculated for changes in nett volumetric cyanotoxin concentration( μ_(tox) : specific cyanotoxin production rate) over similar time intervals. How μ_c(or μ_g) covaries with μ tox over the cell cycle shows conclusively when cyanotoxins are being produced and metabolised, and how the toxicity of cells change in response to environment stressors. When μ_(tox)/μ_c >1, cyanotoxin cell quotas increase and individual cells become more toxic because the nett cyanotoxin production rate is higher than the cell division rate. When μ_(tox)/μ_c =1, cell cyanotoxin quotas remains fixed because the nett cyanotoxin production rate matches the cell division rate. When μ_(tox)/μ_c <1, the cyanotoxin cell quota decreases because either the nett cyanotoxin production rate is lower than the cell division rate, or metabolic breakdown and/or secretion of cyanotoxins is occurring. These fundamental equations describe cyanotoxin metabolism dynamics at the cellular level and provide the necessary physiological background to understand how environmental stressors drive changes in bloom toxicity.展开更多
Under the condition of the market competition becom in g more and more drastic, the demands of market take on some new features such as individuation, diversification, small batch, unstableness and quick delivery et c...Under the condition of the market competition becom in g more and more drastic, the demands of market take on some new features such as individuation, diversification, small batch, unstableness and quick delivery et c. The Make-to-Stock mode is usually adopted by many enterprises to improve th e balance and stableness of production process. In such enterprises, order batch , production batch and sales batch are the important factors, which affect the s atisfaction of clients, efficiency and benefit of the enterprise. It takes purch ase, production and sales into account respectively when optimizing product batc h in traditional way. However, it ignored the influences of relations between ea ch links of whole system. It is assumed that the consumption and market demand a re continuous process whereas the factual demands are batched when economic batc h is determined. So there exist some deviations between the economic batch deter mined by traditional way and that by integral optimization. Through the integral analysis of Logistics in the production system, we know that from materials are purchased, then manufactured, finally sold, the material changed in appearance and value, it still exist in different links of production system. The amount of materials occupied varies just in different status, from stock status to produc tion status, then to waiting-be-sold status, there is not any substantial chan ge in quantity until they are sold. So we must comprehensively analyze the relat ions among each link based on integral production system, to optimize the materi al batch and cut short production cycle in order to optimize the whole system. In this paper, the production system is taken as a global entity, and in which m aterials variation law and their relations of each link are analyzed; To optimiz e the whole materials flow, a new model of multi-product systems’ economic orde r batch, economic production batch and optimal sale lot multi-product syste ms’ is developed which based on the limit of capitals and stock area.展开更多
We arrange quantum mechanical operators ■ in their normally ordered product forms by using Touchard polynomials.Moreover,we derive the anti-normally ordered forms of ■ by using special functions as well as Stirling-...We arrange quantum mechanical operators ■ in their normally ordered product forms by using Touchard polynomials.Moreover,we derive the anti-normally ordered forms of ■ by using special functions as well as Stirling-like numbers together with the general mutual transformation rule between normal and anti-normal orderings of operators.Further,the Q-and P-ordered forms of(QP)±m are also obtained by using an analogy method.展开更多
Agro-product enterprises are the mainstay of the traceability system,and are of great importance. We analyze the factors that influence the enthusiasm of agro-product enterprises for continuously establishing traceabi...Agro-product enterprises are the mainstay of the traceability system,and are of great importance. We analyze the factors that influence the enthusiasm of agro-product enterprises for continuously establishing traceability system from characteristics of enterprises,environment and performance,using the data of 81 agro-product enterprises in Sichuan province. It shows that the enthusiasm is greatly influenced by enterprises' characters and performance,such as age,ownership,business pattern of enterprises,market breadth,condition of enterprises' traceability system,income,acceptance of consumers,sales volume. Finally we put forward some recommendations,such as consummating the relative policies,increasing the publicity and perfecting performance assessment system.展开更多
This paper firstly introduced the two stage supply chain consisting of single agricultural product producer and fund restraint retailer.Then,it analyzed the influence of bank interest rate on order quantity,wholesale ...This paper firstly introduced the two stage supply chain consisting of single agricultural product producer and fund restraint retailer.Then,it analyzed the influence of bank interest rate on order quantity,wholesale price and expected profit of retailer and producer on the condition of retailer taking external loan strategy.Studies have shown that when the bank interest rate is in(0,0.9),the order quantity of agricultural products is a decreasing function of bank interest rate; when the bank interest rate is in(0,1),wholesale price of agricultural products decreases with increase in the bank interest rate; when the bank interest rate is in(0,0.6),the expected profit of retailer is a decreasing function of bank interest rate; when the bank interest rate is in(0,1),the expected profit of producer decreases with increase in the bank interest rate.Finally,through simulation calculation examples,it verified suitability of the conclusion,in the hope of providing reference and application value for management of supply chain.展开更多
A minimal generalized time-bandwidth product-based coarse-to-fine strategy is proposed with one novel ideas highlighted: adopting a coarse-to-fine strategy to speed up the searching process. The simulation results on ...A minimal generalized time-bandwidth product-based coarse-to-fine strategy is proposed with one novel ideas highlighted: adopting a coarse-to-fine strategy to speed up the searching process. The simulation results on synthetic and real signals show the validity of the proposed method.展开更多
In this paper, considering a scenario in which there are two quality levels of fresh products and introduction of consumer utility function, we studied the optimal ordering and pricing strategies under certain quantit...In this paper, considering a scenario in which there are two quality levels of fresh products and introduction of consumer utility function, we studied the optimal ordering and pricing strategies under certain quantity. Our results showed that, facing the two quality levels of fresh products, retailers would not benefit from sales of lower quality of fresh products with the deterministic demand. In the pursuit of profit maximization, the initial order quantity is smaller than the potential demand for market.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.11775208)the Foundation for Young Talents in College of Anhui Province,China(Grant Nos.gxyq2021210 and gxyq2019077)the Natural Science Foundation of the Anhui Higher Education Institutions of China(Grant Nos.KJ2020A0638 and 2022AH051586)。
文摘The development of quantum optics theory based on the method of integration within an ordered product of operators(IWOP)has greatly stimulated the study of quantum states in the light field,especially non-Gaussian states with various non-classical properties.In this paper,the two-mode squeezing operator is derived with integral theory within the Weyl ordering product of operators using a combinatorial field in which one mode is a chaotic field and the other mode is a vacuum field.The density operator of the new light field,its entanglement property and photon number distribution are analyzed.We also note that tracing a three-mode pure state can yield this new light field.These methods represent a theoretical approach to investigating new density operators of light fields.
文摘This part demonstrates a prototype system which has been constructed to enable the allocation of orders of different product types to different manufacturing locations . ’ What - if’ experiments using this system show that different allocation rules would provide different outcomes in terms of the number of unallocated orders. A high number of unallocated orders will have a direct Impact on workload. Further research effort is necessary to channel into the exercbe of production order allocation with particular reference to allocation rules.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 10775097 and 10874174)
文摘By introducing the s-parameterized generalized Wigner operator into phase-space quantum mechanics we invent the technique of integration within s-ordered product of operators(which considers normally ordered,antinormally ordered and Weyl ordered product of operators as its special cases).The s-ordered operator expansion(denoted by...) formula of density operators is derived,which is ρ = 2 1 s ∫ d2βπβ|ρ |β exp { 2 s 1(s|β|2 β a + βa a a) }.The s-parameterized quantization scheme is thus completely established.
文摘In an asynchronous cooperative editing workflow of a structured document, each of the co-authors receives in the different phases of the editing process, a copy of the document to insert its contribution. For confidentiality reasons, this copy may be only a partial replica containing only parts of the (global) document which are of demonstrated interest for the considered co-author. Note that some parts may be a demonstrated interest over a co-author;they will therefore be accessible concurrently. When it’s synchronization time (e.g. at the end of an asynchronous editing phase of the process), we want to merge all contributions of all authors in a single document. Due to the asynchronism of edition and to the potential existence of the document parts offering concurrent access, conflicts may arise and make partial replicas unmergeable in their entirety: they are inconsistent, meaning that they contain conflictual parts. The purpose of this paper is to propose a merging approach said by consensus of such partial replicas using tree automata. Specifically, from the partial replicas updates, we build a tree automaton that accepts exactly the consensus documents. These documents are the maximum prefixes containing no conflict of partial replicas merged.
基金This research is funded by Vietnam National University Ho Chi Minh City(VNU-HCM)under Grant No.C2020-28-10.
文摘Stochastic demand is an important factor that heavily affects production planning.It influences activities such as purchasing,manufacturing,and selling,and quick adaption is required.In production planning,for reasons such as reducing costs and obtaining supplier discounts,many decisions must be made in the initial stage when demand has not been realized.The effects of non-optimal decisions will propagate to later stages,which can lead to losses due to overstocks or out-of-stocks.To find the optimal solutions for the initial and later stage regarding demand realization,this study proposes a stochastic two-stage linear program-ming model for a multi-supplier,multi-material,and multi-product purchasing and production planning process.The objective function is the expected total cost after two stages,and the results include detailed plans for purchasing and production in each demand scenario.Small-scale problems are solved through a deterministic equivalent transformation technique.To solve the problems in the large scale,an algorithm combining metaheuristic and sample average approximation is suggested.This algorithm can be implemented in parallel to utilize the power of the solver.The algorithm based on the observation that if the remaining quantity of materials and number of units of products at the end of the initial stage are given,then the problems of the first and second stages can be decomposed.
基金supported by the Major State Basic Research Development Program of China(G19990328)National Tackling Key Program(2011ZX05011-004+6 种基金2011ZX0505220050200069)National Natural Science Foundation of China(11101244112712311077112410372052)Doctorate Foundation of the Ministry of Education of China(20030422047)
文摘A kind of second-order implicit fractional step characteristic finite difference method is presented in this paper for the numerically simulation coupled system of enhanced(chemical) oil production in porous media.Some techniques,such as the calculus of variations,energy analysis method,commutativity of the products of difference operators,decomposition of high-order difference operators and the theory of a priori estimates are introduced and an optimal order error estimates in l^2 norm is derived.This method has been applied successfully to the numerical simulation of enhanced oil production in actual oilfields,and the simulation results are quite interesting and satisfactory.
基金This work is Supported by NSF of Heilongjiang Provice
文摘Let K<sup>n×n</sup> be the set of all n×n matrices and K<sub>r</sub><sup>n×n</sup> the set {A∈K<sup>n×n</sup>|rankA=r} on askew field K. Zhuang [1] denotes by A<sup>#</sup> the group inverse of A∈K<sup>n×n</sup> which is the solu-tion of the euqations:AXA=A, XAX=X, AX=AX.
基金Project supported by the Major State Basic Research Development Program of China(No.G19990328)the National Natural Science Foundation of China(Nos.10771124,10372052,and 11101244)+2 种基金the National Tackling Key Problems Program of China(Nos.2011ZX05011-004,2011ZX05052,and 2005020069)the Doctorate Foundation of the Ministry of Education of China(No.20030422047)the Natural Science Foundation of Shandong Province of China(No.ZR2011AM015)
文摘A kind of second-order implicit upwind fractional step finite difference methods are presented for the numerical simulation of coupled systems for enhanced(chemical)oil production with capillary force in the porous media.Some techniques,e.g.,the calculus of variations,the energy analysis method,the commutativity of the products of difference operators,the decomposition of high-order difference operators,and the theory of a priori estimate,are introduced.An optimal order error estimate in the l^2 norm is derived.The method is successfully used in the numerical simulation of the enhanced oil production in actual oilfields.The simulation results are satisfactory and interesting.
文摘As a rough cut planning exercise,production order allo-cation for offshore manu facturing sites in the clothingindustry has received little attention as does other typesof planning like production planning.This paper outlinesan investigation into the exercise of production order al-location in the clothing industry.We have identified thatpractitioners involving in this exercise are not unanimousin the selection of offshore sites.Part 1 presents thebackground,objectives,process and conceptual model ofproduction order allocation.
基金supported by the University Natural Science Foundation of Anhui Province,China (Grant No. KJ2011Z339)the National Natural Science Foundation of China (Grant No. 10874174)
文摘By virtue of the coherent state representation of the newly introduced Fresnel operator and its group product property,we obtain new decomposition of the Fresnel operator as the product of the quadratic phase operator,the squeezing operator,and the fractional Fourier transformation operator,which in turn sheds light on the matrix optics design of ABCD-systems.The new decomposition for the two-mode Fresnel operator is also obtained by the use of entangled state representation.
基金Supported by National Nat ural Science Foundation of China(Grant Nos.51675227,51975249)Jilin Province Science and Technology Development Funds(Grant Nos.20180201007GX,20190302017GX)+2 种基金Technology Development and Research of Jilin Province(Grant No.2019C037-01)Changchun Science and Technology Planning Project(Grant No.19SS011)National Science and technology Major Project(Grant No.2014ZX04015031).
文摘Heavy-duty machine tools are composed of many subsystems with different functions,and their reliability is governed by the reliabilities of these subsystems.It is important to rank the weaknesses of subsystems and identify the weakest subsystem to optimize products and improve their reliabilities.However,traditional ranking methods based on failure mode effect and critical analysis(FMECA)does not consider the complex maintenance of products.Herein,a weakness ranking method for the subsystems of heavy-duty machine tools is proposed based on generalized FMECA information.In this method,eight reliability indexes,including maintainability and maintenance cost,are considered in the generalized FMECA information.Subsequently,the cognition best worst method is used to calculate the weight of each screened index,and the weaknesses of the subsystems are ranked using a technique for order preference by similarity to an ideal solution.Finally,based on the failure data collected from certain domestic heavy-duty horizontal lathes,the weakness ranking result of the subsystems is obtained to verify the effectiveness of the proposed method.An improved weakness ranking method that can comprehensively analyze and identify weak subsystems is proposed herein for designing and improving the reliability of complex electromechanical products.
文摘Cyanobacteria are oxygenic photosynthetic Gram-negative bacteria that can form potentially toxic blooms in eutrophic and slow flowing aquatic ecosystems. Bloom toxicity varies spatially and temporally, but understanding the mechanisms that drive these changes remains largely a mystery. Changes in bloom toxicity may result from changes in intracellular toxin pool sizes of cyanotoxins with differing molecular toxicities, and/or from changes in the cell concentrations of toxic and non-toxic cyanobacterial species or strains within bloom populations. We show here how first-order rate kinetics at the cellular level can be used to explain how environmental conditions drive changes in bloom toxicity at the ecological level. First order rate constants can be calculated for changes in cell concentration( μ_c : specific cell division rate) or the volumetric biomass concentration( μ_g : specific growth rate) between short time intervals throughout the cell cycle. Similar first order rate constants can be calculated for changes in nett volumetric cyanotoxin concentration( μ_(tox) : specific cyanotoxin production rate) over similar time intervals. How μ_c(or μ_g) covaries with μ tox over the cell cycle shows conclusively when cyanotoxins are being produced and metabolised, and how the toxicity of cells change in response to environment stressors. When μ_(tox)/μ_c >1, cyanotoxin cell quotas increase and individual cells become more toxic because the nett cyanotoxin production rate is higher than the cell division rate. When μ_(tox)/μ_c =1, cell cyanotoxin quotas remains fixed because the nett cyanotoxin production rate matches the cell division rate. When μ_(tox)/μ_c <1, the cyanotoxin cell quota decreases because either the nett cyanotoxin production rate is lower than the cell division rate, or metabolic breakdown and/or secretion of cyanotoxins is occurring. These fundamental equations describe cyanotoxin metabolism dynamics at the cellular level and provide the necessary physiological background to understand how environmental stressors drive changes in bloom toxicity.
文摘Under the condition of the market competition becom in g more and more drastic, the demands of market take on some new features such as individuation, diversification, small batch, unstableness and quick delivery et c. The Make-to-Stock mode is usually adopted by many enterprises to improve th e balance and stableness of production process. In such enterprises, order batch , production batch and sales batch are the important factors, which affect the s atisfaction of clients, efficiency and benefit of the enterprise. It takes purch ase, production and sales into account respectively when optimizing product batc h in traditional way. However, it ignored the influences of relations between ea ch links of whole system. It is assumed that the consumption and market demand a re continuous process whereas the factual demands are batched when economic batc h is determined. So there exist some deviations between the economic batch deter mined by traditional way and that by integral optimization. Through the integral analysis of Logistics in the production system, we know that from materials are purchased, then manufactured, finally sold, the material changed in appearance and value, it still exist in different links of production system. The amount of materials occupied varies just in different status, from stock status to produc tion status, then to waiting-be-sold status, there is not any substantial chan ge in quantity until they are sold. So we must comprehensively analyze the relat ions among each link based on integral production system, to optimize the materi al batch and cut short production cycle in order to optimize the whole system. In this paper, the production system is taken as a global entity, and in which m aterials variation law and their relations of each link are analyzed; To optimiz e the whole materials flow, a new model of multi-product systems’ economic orde r batch, economic production batch and optimal sale lot multi-product syste ms’ is developed which based on the limit of capitals and stock area.
基金Project supported by the National Natural Science Foundation of China (Grant No. 11804085)the Natural Science Foundation of Shandong Province, China (Grant No. ZR2017MEM012).
文摘We arrange quantum mechanical operators ■ in their normally ordered product forms by using Touchard polynomials.Moreover,we derive the anti-normally ordered forms of ■ by using special functions as well as Stirling-like numbers together with the general mutual transformation rule between normal and anti-normal orderings of operators.Further,the Q-and P-ordered forms of(QP)±m are also obtained by using an analogy method.
基金Supported by the National Philosophy and Social Science Fund Project (09XJY024)
文摘Agro-product enterprises are the mainstay of the traceability system,and are of great importance. We analyze the factors that influence the enthusiasm of agro-product enterprises for continuously establishing traceability system from characteristics of enterprises,environment and performance,using the data of 81 agro-product enterprises in Sichuan province. It shows that the enthusiasm is greatly influenced by enterprises' characters and performance,such as age,ownership,business pattern of enterprises,market breadth,condition of enterprises' traceability system,income,acceptance of consumers,sales volume. Finally we put forward some recommendations,such as consummating the relative policies,increasing the publicity and perfecting performance assessment system.
基金Supported by Key Project of National Natural Science Foundation(70932005)Project of National Natural Science Foundation(71102055,71372140)Young Scholar Project of Sichuan Provincial Education Department(13ZB0035,14ZA0304)
文摘This paper firstly introduced the two stage supply chain consisting of single agricultural product producer and fund restraint retailer.Then,it analyzed the influence of bank interest rate on order quantity,wholesale price and expected profit of retailer and producer on the condition of retailer taking external loan strategy.Studies have shown that when the bank interest rate is in(0,0.9),the order quantity of agricultural products is a decreasing function of bank interest rate; when the bank interest rate is in(0,1),wholesale price of agricultural products decreases with increase in the bank interest rate; when the bank interest rate is in(0,0.6),the expected profit of retailer is a decreasing function of bank interest rate; when the bank interest rate is in(0,1),the expected profit of producer decreases with increase in the bank interest rate.Finally,through simulation calculation examples,it verified suitability of the conclusion,in the hope of providing reference and application value for management of supply chain.
文摘A minimal generalized time-bandwidth product-based coarse-to-fine strategy is proposed with one novel ideas highlighted: adopting a coarse-to-fine strategy to speed up the searching process. The simulation results on synthetic and real signals show the validity of the proposed method.
文摘In this paper, considering a scenario in which there are two quality levels of fresh products and introduction of consumer utility function, we studied the optimal ordering and pricing strategies under certain quantity. Our results showed that, facing the two quality levels of fresh products, retailers would not benefit from sales of lower quality of fresh products with the deterministic demand. In the pursuit of profit maximization, the initial order quantity is smaller than the potential demand for market.
